aboutsummaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)Author
2016-08-18Merge tag 'kvm-arm-for-v4.8-rc3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Fixes for v4.8-rc3 This tag contains the following fixes on top of v4.8-rc1: - ITS init issues - ITS error handling issues - ITS IRQ leakage fix - Plug a couple of ITS race conditions - An erratum workaround for timers - Some removal of misleading use of errors and comments - A fix for GICv3 on 32-bit guests
2016-08-17KVM: arm/arm64: timer: Workaround misconfigured timer interruptMarc Zyngier
Similarily to f005bd7e3b84 ("clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered"), make sure we can survive an interrupt that has been misconfigured as edge-triggered by forcing it to be level-triggered (active low is assumed, but the GIC doesn't really care whether this is high or low). Hopefully, the amount of shouting in the kernel log will convince the user to do something about their firmware. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-16KVM: arm64: ITS: avoid re-mapping LPIsAndre Przywara
When a guest wants to map a device-ID/event-ID combination that is already mapped, we may end up in a situation where an LPI is never "put", thus never being freed. Since the GICv3 spec says that mapping an already mapped LPI is UNPREDICTABLE, lets just bail out early in this situation to avoid any potential leaks. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-15KVM: arm64: check for ITS device on MSI injectionAndre Przywara
When userspace provides the doorbell address for an MSI to be injected into the guest, we find a KVM device which feels responsible. Lets check that this device is really an emulated ITS before we make real use of the container_of-ed pointer. [ Moved NULL-pointer check to caller of static function - Christoffer ] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-15KVM: arm64: ITS: move ITS registration into first VCPU runAndre Przywara
Currently we register an ITS device upon userland issuing the CTLR_INIT ioctl to mark initialization of the ITS as done. This deviates from the initialization sequence of the existing GIC devices and does not play well with the way QEMU handles things. To be more in line with what we are used to, register the ITS(es) just before the first VCPU is about to run, so in the map_resources() call. This involves iterating through the list of KVM devices and map each ITS that we find. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-15KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomicChristoffer Dall
There are two problems with the current implementation of the MMIO handlers for the propbaser and pendbaser: First, the write to the value itself is not guaranteed to be an atomic 64-bit write so two concurrent writes to the structure field could be intermixed. Second, because we do a read-modify-update operation without any synchronization, if we have two 32-bit accesses to separate parts of the register, we can loose one of them. By using the atomic cmpxchg64 we should cover both issues above. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-12KVM: Protect device ops->create and list_add with kvm->lockChristoffer Dall
KVM devices were manipulating list data structures without any form of synchronization, and some implementations of the create operations also suffered from a lack of synchronization. Now when we've split the xics create operation into create and init, we can hold the kvm->lock mutex while calling the create operation and when manipulating the devices list. The error path in the generic code gets slightly ugly because we have to take the mutex again and delete the device from the list, but holding the mutex during anon_inode_getfd or releasing/locking the mutex in the common non-error path seemed wrong. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-12KVM: PPC: Move xics_debugfs_init out of createChristoffer Dall
As we are about to hold the kvm->lock during the create operation on KVM devices, we should move the call to xics_debugfs_init into its own function, since holding a mutex over extended amounts of time might not be a good idea. Introduce an init operation on the kvm_device_ops struct which cannot fail and call this, if configured, after the device has been created. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-10KVM: arm64: vgic-its: Plug race in vgic_put_irqChristoffer Dall
Right now the following sequence of events can happen: 1. Thread X calls vgic_put_irq 2. Thread Y calls vgic_add_lpi 3. Thread Y gets lpi_list_lock 4. Thread X drops the ref count to 0 and blocks on lpi_list_lock 5. Thread Y finds the irq via the lpi_list_lock, raises the ref count to 1, and release the lpi_list_lock. 6. Thread X proceeds and frees the irq. Avoid this by holding the spinlock around the kref_put. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-10KVM: arm64: vgic-its: Handle errors from vgic_add_lpiChristoffer Dall
During low memory conditions, we could be dereferencing a NULL pointer when vgic_add_lpi fails to allocate memory. Consider for example this call sequence: vgic_its_cmd_handle_mapi itte->irq = vgic_add_lpi(kvm, lpi_nr); update_lpi_config(kvm, itte->irq, NULL); ret = kvm_read_guest(kvm, propbase + irq->intid ^^^^ kaboom? Instead, return an error pointer from vgic_add_lpi and check the return value from its single caller. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-09KVM: arm64: ITS: return 1 on successful MSI injectionAndre Przywara
According to the KVM API documentation a successful MSI injection should return a value > 0 on success. Return possible errors in vgic_its_trigger_msi() and report a successful injection back to userland, while also reporting the case where the MSI could not be delivered due to the guest not having the LPI mapped, for instance. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-04Merge tag 'kvm-arm-for-4.8-take2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.8 - Take 2 Includes GSI routing support to go along with the new VGIC and a small fix that has been cooking in -next for a while.
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-24KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototypeMarc Zyngier
kvm_set_routing_entry is changing in -next, and causes things to explode. Add a temporary workaround that should be dropped when we hit 4.8-rc1 Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-22Merge tag 'kvm-arm-for-4.8' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into next KVM/ARM changes for Linux 4.8 - GICv3 ITS emulation - Simpler idmap management that fixes potential TLB conflicts - Honor the kernel protection in HYP mode - Removal of the old vgic implementation
2016-07-22KVM: arm/arm64: Enable MSI routingEric Auger
Up to now, only irqchip routing entries could be set. This patch adds the capability to insert MSI routing entries. For ARM64, let's also increase KVM_MAX_IRQ_ROUTES to 4096: this include SPI irqchip routes plus MSI routes. In the future this might be extended. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-22KVM: arm/arm64: Enable irqchip routingEric Auger
This patch adds compilation and link against irqchip. Main motivation behind using irqchip code is to enable MSI routing code. In the future irqchip routing may also be useful when targeting multiple irqchips. Routing standard callbacks now are implemented in vgic-irqfd: - kvm_set_routing_entry - kvm_set_irq - kvm_set_msi They only are supported with new_vgic code. Both HAVE_KVM_IRQCHIP and HAVE_KVM_IRQ_ROUTING are defined. KVM_CAP_IRQ_ROUTING is advertised and KVM_SET_GSI_ROUTING is allowed. So from now on IRQCHIP routing is enabled and a routing table entry must exist for irqfd injection to succeed for a given SPI. This patch builds a default flat irqchip routing table (gsi=irqchip.pin) covering all the VGIC SPI indexes. This routing table is overwritten by the first first user-space call to KVM_SET_GSI_ROUTING ioctl. MSI routing setup is not yet allowed. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-22KVM: irqchip: Convey devid to kvm_set_msiEric Auger
on ARM, a devid field is populated in kvm_msi struct in case the flag is set to KVM_MSI_VALID_DEVID. Let's propagate both flags and devid field in kvm_kernel_irq_routing_entry. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Simplify MAPI error handlingMarc Zyngier
If we care to move all the checks that do not involve any memory allocation, we can simplify the MAPI error handling. Let's do that, it cannot hurt. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlersMarc Zyngier
vgic_its_cmd_handle_mapi has an extra "subcmd" argument, which is already contained in the command buffer that all command handlers obtain from the command queue. Let's drop it, as it is not that useful. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Turn device_id validation into generic ID validationMarc Zyngier
There is no need to have separate functions to validate devices and collections, as the architecture doesn't really distinguish the two, and they are supposed to be managed the same way. Let's turn the DevID checker into a generic one. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Add pointer to corresponding kvm_deviceMarc Zyngier
Going from the ITS structure to the corresponding KVM structure would be quite handy at times. The kvm_device pointer that is passed at create time is quite convenient for this, so let's keep a copy of it in the vgic_its structure. This will be put to a good use in subsequent patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Add collection allocator/destructorMarc Zyngier
Instead of spreading random allocations all over the place, consolidate allocation/init/freeing of collections in a pair of constructor/destructor. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Fix L2 entry validation for indirect tablesMarc Zyngier
When checking that the storage address of a device entry is valid, it is critical to compute the actual address of the entry, rather than relying on the beginning of the page to match a CPU page of the same size: for example, if the guest places the table at the last 64kB boundary of RAM, but RAM size isn't a multiple of 64kB... Fix this by computing the actual offset of the device ID in the L2 page, and check the corresponding GFN. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Validate the device table L1 entryMarc Zyngier
Checking that the device_id fits if the table, and we must make sure that the associated memory is also accessible. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Fix misleading nr_entries in vgic_its_check_device_idMarc Zyngier
The nr_entries variable in vgic_its_check_device_id actually describe the size of the L1 table, and not the number of entries in this table. Rename it to l1_tbl_size, so that we can now change the code with a better understanding of what is what. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Fix vgic_its_check_device_id BE handlingMarc Zyngier
The ITS tables are stored in LE format. If the host is reading a L1 table entry to check its validity, it must convert it to the CPU endianness. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Fix handling of indirect tablesMarc Zyngier
The current code will fail on valid indirect tables, and happily use the ones that are pointing out of the guest RAM. Funny what a small "!" can do for you... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Generalize use of vgic_get_irq_krefMarc Zyngier
Instead of sprinkling raw kref_get() calls everytime we cannot do a normal vgic_get_irq(), use the existing vgic_get_irq_kref(), which does the same thing and is paired with a vgic_put_irq(). vgic_get_irq_kref is moved to vgic.h in order to be easily shared. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm/arm64: Fix vGICv2 KVM_DEV_ARM_VGIC_GRP_CPU/DIST_REGSEric Auger
For VGICv2 save and restore the CPU interface registers are accessed. Restore the modality which has been altered. Also explicitly set the iodev_type for both the DIST and CPU interface. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Enable ITS emulation as a virtual MSI controllerAndre Przywara
Now that all ITS emulation functionality is in place, we advertise MSI functionality to userland and also the ITS device to the guest - if userland has configured that. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Implement MSI injection in ITS emulationAndre Przywara
When userland wants to inject an MSI into the guest, it uses the KVM_SIGNAL_MSI ioctl, which carries the doorbell address along with the payload and the device ID. With the help of the KVM IO bus framework we learn the corresponding ITS from the doorbell address. We then use our wrapper functions to iterate the linked lists and find the proper Interrupt Translation Table Entry (ITTE) and thus the corresponding struct vgic_irq to finally set the pending bit. We also provide the handler for the ITS "INT" command, which allows a guest to trigger an MSI via the ITS command queue. Since this one knows about the right ITS already, we directly call the MMIO handler function without using the kvm_io_bus framework. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Implement ITS command queue command handlersAndre Przywara
The connection between a device, an event ID, the LPI number and the associated CPU is stored in in-memory tables in a GICv3, but their format is not specified by the spec. Instead software uses a command queue in a ring buffer to let an ITS implementation use its own format. Implement handlers for the various ITS commands and let them store the requested relation into our own data structures. Those data structures are protected by the its_lock mutex. Our internal ring buffer read and write pointers are protected by the its_cmd mutex, so that only one VCPU per ITS can handle commands at any given time. Error handling is very basic at the moment, as we don't have a good way of communicating errors to the guest (usually an SError). The INT command handler is missing from this patch, as we gain the capability of actually injecting MSIs into the guest only later on. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Allow updates of LPI configuration tableAndre Przywara
The (system-wide) LPI configuration table is held in a table in (guest) memory. To achieve reasonable performance, we cache this data in our struct vgic_irq. If the guest updates the configuration data (which consists of the enable bit and the priority value), it issues an INV or INVALL command to allow us to update our information. Provide functions that update that information for one LPI or all LPIs mapped to a specific collection. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Read initial LPI pending tableAndre Przywara
The LPI pending status for a GICv3 redistributor is held in a table in (guest) memory. To achieve reasonable performance, we cache the pending bit in our struct vgic_irq. The initial pending state must be read from guest memory upon enabling LPIs for this redistributor. As we can't access the guest memory while we hold the lpi_list spinlock, we create a snapshot of the LPI list and iterate over that. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Connect LPIs to the VGIC emulationAndre Przywara
LPIs are dynamically created (mapped) at guest runtime and their actual number can be quite high, but is mostly assigned using a very sparse allocation scheme. So arrays are not an ideal data structure to hold the information. We use a spin-lock protected linked list to hold all mapped LPIs, represented by their struct vgic_irq. This lock is grouped between the ap_list_lock and the vgic_irq lock in our locking order. Also we store a pointer to that struct vgic_irq in our struct its_itte, so we can easily access it. Eventually we call our new vgic_get_lpi() from vgic_get_irq(), so the VGIC code gets transparently access to LPIs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Implement basic ITS register handlersAndre Przywara
Add emulation for some basic MMIO registers used in the ITS emulation. This includes: - GITS_{CTLR,TYPER,IIDR} - ID registers - GITS_{CBASER,CREADR,CWRITER} (which implement the ITS command buffer handling) - GITS_BASER<n> Most of the handlers are pretty straight forward, only the CWRITER handler is a bit more involved by taking the new its_cmd mutex and then iterating over the command buffer. The registers holding base addresses and attributes are sanitised before storing them. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Introduce new KVM ITS deviceAndre Przywara
Introduce a new KVM device that represents an ARM Interrupt Translation Service (ITS) controller. Since there can be multiple of this per guest, we can't piggy back on the existing GICv3 distributor device, but create a new type of KVM device. On the KVM_CREATE_DEVICE ioctl we allocate and initialize the ITS data structure and store the pointer in the kvm_device data. Upon an explicit init ioctl from userland (after having setup the MMIO address) we register the handlers with the kvm_io_bus framework. Any reference to an ITS thus has to go via this interface. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic-its: Introduce ITS emulation file with MMIO frameworkAndre Przywara
The ARM GICv3 ITS emulation code goes into a separate file, but needs to be connected to the GICv3 emulation, of which it is an option. The ITS MMIO handlers require the respective ITS pointer to be passed in, so we amend the existing VGIC MMIO framework to let it cope with that. Also we introduce the basic ITS data structure and initialize it, but don't return any success yet, as we are not yet ready for the show. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm64: vgic: Handle ITS related GICv3 redistributor registersAndre Przywara
In the GICv3 redistributor there are the PENDBASER and PROPBASER registers which we did not emulate so far, as they only make sense when having an ITS. In preparation for that emulate those MMIO accesses by storing the 64-bit data written into it into a variable which we later read in the ITS emulation. We also sanitise the registers, making sure RES0 regions are respected and checking for valid memory attributes. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm/arm64: vgic: Add refcounting for IRQsAndre Przywara
In the moment our struct vgic_irq's are statically allocated at guest creation time. So getting a pointer to an IRQ structure is trivial and safe. LPIs are more dynamic, they can be mapped and unmapped at any time during the guest's _runtime_. In preparation for supporting LPIs we introduce reference counting for those structures using the kernel's kref infrastructure. Since private IRQs and SPIs are statically allocated, we avoid actually refcounting them, since they would never be released anyway. But we take provisions to increase the refcount when an IRQ gets onto a VCPU list and decrease it when it gets removed. Also this introduces vgic_put_irq(), which wraps kref_put and hides the release function from the callers. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: kvm_io_bus: Add kvm_io_bus_get_dev() callAndre Przywara
The kvm_io_bus framework is a nice place of holding information about various MMIO regions for kernel emulated devices. Add a call to retrieve the kvm_io_device structure which is associated with a certain MMIO address. This avoids to duplicate kvm_io_bus' knowledge of MMIO regions without having to fake MMIO calls if a user needs the device a certain MMIO address belongs to. This will be used by the ITS emulation to get the associated ITS device when someone triggers an MSI via an ioctl from userspace. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm/arm64: vgic: Check return value for kvm_register_vgic_deviceAndre Przywara
kvm_register_device_ops() can return an error, so lets check its return value and propagate this up the call chain. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-18KVM: arm/arm64: vgic: Move redistributor kvm_io_devicesAndre Przywara
Logically a GICv3 redistributor is assigned to a (v)CPU, so we should aim to keep redistributor related variables out of our struct vgic_dist. Let's start by replacing the redistributor related kvm_io_device array with two members in our existing struct vgic_cpu, which are naturally per-VCPU and thus don't require any allocation / freeing. So apart from the better fit with the redistributor design this saves some code as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-15KVM/arm/arm64/vgic-new: Convert to hotplug state machineAnna-Maria Gleixner
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Eric Auger <eric.auger@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: kvmarm@lists.cs.columbia.edu Cc: linux-arm-kernel@lists.infradead.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.900484868@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15arm/kvm/arch_timer: Convert to hotplug state machineRichard Cochran
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: kvmarm@lists.cs.columbia.edu Cc: linux-arm-kernel@lists.infradead.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.634155707@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15arm/kvm/vgic: Convert to hotplug state machineRichard Cochran
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. The VGIC callback is run after KVM's main callback since it reflects the makefile order. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: kvmarm@lists.cs.columbia.edu Cc: linux-arm-kernel@lists.infradead.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153336.546953286@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15virt: Convert kvm hotplug to state machineThomas Gleixner
Install the callbacks via the state machine. The core won't invoke the callbacks on already online CPUs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153335.886159080@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14KVM: don't use anon_inode_getfd() before possible failuresAl Viro
Once anon_inode_getfd() has succeeded, it's impossible to undo in a clean way and no, sys_close() is not usable in such cases. Use anon_inode_getfile() and get_unused_fd_flags() to get struct file and descriptor and do *not* install the file into the descriptor table until after the last possible failure exit. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>