aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A decent batch of fixes here. I'd say about half are for problems that have existed for a while, and half are for new regressions added in the 4.20 merge window. 1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach. 2) Revert bogus emac driver change, from Benjamin Herrenschmidt. 3) Handle BPF exported data structure with pointers when building 32-bit userland, from Daniel Borkmann. 4) Memory leak fix in act_police, from Davide Caratti. 5) Check RX checksum offload in RX descriptors properly in aquantia driver, from Dmitry Bogdanov. 6) SKB unlink fix in various spots, from Edward Cree. 7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from Eric Dumazet. 8) Fix FID leak in mlxsw driver, from Ido Schimmel. 9) IOTLB locking fix in vhost, from Jean-Philippe Brucker. 10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory limits otherwise namespace exit can hang. From Jiri Wiesner. 11) Address block parsing length fixes in x25 from Martin Schiller. 12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan. 13) For tun interfaces, only iface delete works with rtnl ops, enforce this by disallowing add. From Nicolas Dichtel. 14) Use after free in liquidio, from Pan Bian. 15) Fix SKB use after passing to netif_receive_skb(), from Prashant Bhole. 16) Static key accounting and other fixes in XPS from Sabrina Dubroca. 17) Partially initialized flow key passed to ip6_route_output(), from Shmulik Ladkani. 18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas Falcon. 19) Several small TCP fixes (off-by-one on window probe abort, NULL deref in tail loss probe, SNMP mis-estimations) from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits) net/sched: cls_flower: Reject duplicated rules also under skip_sw bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips. bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips. bnxt_en: Keep track of reserved IRQs. bnxt_en: Fix CNP CoS queue regression. net/mlx4_core: Correctly set PFC param if global pause is turned off. Revert "net/ibm/emac: wrong bit is used for STA control" neighbour: Avoid writing before skb->head in neigh_hh_output() ipv6: Check available headroom in ip6_xmit() even without options tcp: lack of available data can also cause TSO defer ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl mlxsw: spectrum_router: Relax GRE decap matching check mlxsw: spectrum_switchdev: Avoid leaking FID's reference count mlxsw: spectrum_nve: Remove easily triggerable warnings ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes sctp: frag_point sanity check tcp: fix NULL ref in tail loss probe tcp: Do not underestimate rwnd_limited net: use skb_list_del_init() to remove from RX sublists ...
2018-12-09Merge tag 'libnvdimm-fixes-4.20-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A regression fix for the Address Range Scrub implementation, yes another one, and support for platforms that misalign persistent memory relative to the Linux memory hotplug section constraint. Longer term, support for sub-section memory hotplug would alleviate alignment waste, but until then this hack allows a 'struct page' memmap to be established for these misaligned memory regions. These have all appeared in a -next release, and thanks to Patrick for reporting and testing the alignment padding fix. Summary: - Unless and until the core mm handles memory hotplug units smaller than a section (128M), persistent memory namespaces must be padded to section alignment. The libnvdimm core already handled section collision with "System RAM", but some configurations overlap independent "Persistent Memory" ranges within a section, so additional padding injection is added for that case. - The recent reworks of the ARS (address range scrub) state machine to reduce the number of state flags inadvertantly missed a conversion of acpi_nfit_ars_rescan() call sites. Fix the regression whereby user-requested ARS results in a "short" scrub rather than a "long" scrub. - Fixup the unit tests to handle / test the 128M section alignment of mocked test resources. * tag 'libnvdimm-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: acpi/nfit: Fix user-initiated ARS to be "ARS-long" rather than "ARS-short" libnvdimm, pfn: Pad pfn namespaces relative to other regions tools/testing/nvdimm: Align test resources to 128M
2018-12-05tools/testing/nvdimm: Align test resources to 128MDan Williams
In preparation for libnvdimm growing new restrictions to detect section conflicts between persistent memory regions, enable nfit_test to allocate aligned resources. Use a gen_pool to allocate nfit_test's fake resources in a separate address space from the virtual translation of the same. Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-04bpf: improve verifier branch analysisAlexei Starovoitov
pathological bpf programs may try to force verifier to explode in the number of branch states: 20: (d5) if r1 s<= 0x24000028 goto pc+0 21: (b5) if r0 <= 0xe1fa20 goto pc+2 22: (d5) if r1 s<= 0x7e goto pc+0 23: (b5) if r0 <= 0xe880e000 goto pc+0 24: (c5) if r0 s< 0x2100ecf4 goto pc+0 25: (d5) if r1 s<= 0xe880e000 goto pc+1 26: (c5) if r0 s< 0xf4041810 goto pc+0 27: (d5) if r1 s<= 0x1e007e goto pc+0 28: (b5) if r0 <= 0xe86be000 goto pc+0 29: (07) r0 += 16614 30: (c5) if r0 s< 0x6d0020da goto pc+0 31: (35) if r0 >= 0x2100ecf4 goto pc+0 Teach verifier to recognize always taken and always not taken branches. This analysis is already done for == and != comparison. Expand it to all other branches. It also helps real bpf programs to be verified faster: before after bpf_lb-DLB_L3.o 2003 1940 bpf_lb-DLB_L4.o 3173 3089 bpf_lb-DUNKNOWN.o 1080 1065 bpf_lxc-DDROP_ALL.o 29584 28052 bpf_lxc-DUNKNOWN.o 36916 35487 bpf_netdev.o 11188 10864 bpf_overlay.o 6679 6643 bpf_lcx_jit.o 39555 38437 Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-01Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull STIBP fallout fixes from Thomas Gleixner: "The performance destruction department finally got it's act together and came up with a cure for the STIPB regression: - Provide a command line option to control the spectre v2 user space mitigations. Default is either seccomp or prctl (if seccomp is disabled in Kconfig). prctl allows mitigation opt-in, seccomp enables the migitation for sandboxed processes. - Rework the code to handle the conditional STIBP/IBPB control and remove the now unused ptrace_may_access_sched() optimization attempt - Disable STIBP automatically when SMT is disabled - Optimize the switch_to() logic to avoid MSR writes and invocations of __switch_to_xtra(). - Make the asynchronous speculation TIF updates synchronous to prevent stale mitigation state. As a general cleanup this also makes retpoline directly depend on compiler support and removes the 'minimal retpoline' option which just pretended to provide some form of security while providing none" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86/speculation: Provide IBPB always command line options x86/speculation: Add seccomp Spectre v2 user space protection mode x86/speculation: Enable prctl mode for spectre_v2_user x86/speculation: Add prctl() control for indirect branch speculation x86/speculation: Prepare arch_smt_update() for PRCTL mode x86/speculation: Prevent stale SPEC_CTRL msr content x86/speculation: Split out TIF update ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS x86/speculation: Prepare for conditional IBPB in switch_mm() x86/speculation: Avoid __switch_to_xtra() calls x86/process: Consolidate and simplify switch_to_xtra() code x86/speculation: Prepare for per task indirect branch speculation control x86/speculation: Add command line control for indirect branch speculation x86/speculation: Unify conditional spectre v2 print functions x86/speculataion: Mark command line parser data __initdata x86/speculation: Mark string arrays const correctly x86/speculation: Reorder the spec_v2 code x86/l1tf: Show actual SMT state x86/speculation: Rework SMT state change sched/smt: Expose sched_smt_present static key ...
2018-11-30bpf: Improve socket lookup reuseport documentationJoe Stringer
Improve the wording around socket lookup for reuseport sockets, and ensure that both bpf.h headers are in sync. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30bpf: Support sk lookup in netns with id 0Joe Stringer
David Ahern and Nicolas Dichtel report that the handling of the netns id 0 is incorrect for the BPF socket lookup helpers: rather than finding the netns with id 0, it is resolving to the current netns. This renders the netns_id 0 inaccessible. To fix this, adjust the API for the netns to treat all negative s32 values as a lookup in the current netns (including u64 values which when truncated to s32 become negative), while any values with a positive value in the signed 32-bit integer space would result in a lookup for a socket in the netns corresponding to that id. As before, if the netns with that ID does not exist, no socket will be found. Any netns outside of these ranges will fail to find a corresponding socket, as those values are reserved for future usage. Signed-off-by: Joe Stringer <joe@wand.net.nz> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Joey Pabalinas <joeypabalinas@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30bpf: fix pointer offsets in context for 32 bitDaniel Borkmann
Currently, pointer offsets in three BPF context structures are broken in two scenarios: i) 32 bit compiled applications running on 64 bit kernels, and ii) LLVM compiled BPF programs running on 32 bit kernels. The latter is due to BPF target machine being strictly 64 bit. So in each of the cases the offsets will mismatch in verifier when checking / rewriting context access. Fix this by providing a helper macro __bpf_md_ptr() that will enforce padding up to 64 bit and proper alignment, and for context access a macro bpf_ctx_range_ptr() which will cover full 64 bit member range on 32 bit archs. For flow_keys, we additionally need to force the size check to sizeof(__u64) as with other pointer types. Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Fixes: 4f738adba30a ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data") Fixes: 2dbb9b9e6df6 ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30proc: fixup map_files test on armAlexey Dobriyan
https://bugs.linaro.org/show_bug.cgi?id=3782 Turns out arm doesn't permit mapping address 0, so try minimum virtual address instead. Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: Rafael David Tinoco <rafael.tinoco@linaro.org> Tested-by: Rafael David Tinoco <rafael.tinoco@linaro.org> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30bpf: Fix verifier log string check for bad alignment.David Miller
The message got changed a lot time ago. This was responsible for 36 test case failures on sparc64. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - counter freezing related regression fix - uprobes race fix - Intel PMU unusual event combination fix - .. and diverse tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: uprobes: Fix handle_swbp() vs. unregister() + register() race once more perf/x86/intel: Disallow precise_ip on BTS events perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts() perf/x86/intel: Move branch tracing setup to the Intel-specific source file perf/x86/intel: Fix regression by default disabling perfmon v4 interrupt handling perf tools beauty ioctl: Support new ISO7816 commands tools uapi asm-generic: Synchronize ioctls.h tools arch x86: Update tools's copy of cpufeatures.h tools headers uapi: Synchronize i915_drm.h perf tools: Restore proper cwd on return from mnt namespace tools build feature: Check if get_current_dir_name() is available perf tools: Fix crash on synthesizing the unit
2018-11-30Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "Two fixes for boundary conditions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix segfault in .cold detection with -ffunction-sections objtool: Fix double-free in .cold detection error path
2018-11-28tools: bpftool: fix a bitfield pretty print issueYonghong Song
Commit b12d6ec09730 ("bpf: btf: add btf print functionality") added btf pretty print functionality to bpftool. There is a problem though in printing a bitfield whose type has modifiers. For example, for a type like typedef int ___int; struct tmp_t { int a:3; ___int b:3; }; Suppose we have a map struct bpf_map_def SEC("maps") tmpmap = { .type = BPF_MAP_TYPE_HASH, .key_size = sizeof(__u32), .value_size = sizeof(struct tmp_t), .max_entries = 1, }; and the hash table is populated with one element with key 0 and value (.a = 1 and .b = 2). In BTF, the struct member "b" will have a type "typedef" which points to an int type. The current implementation does not pass the bit offset during transition from typedef to int type, hence incorrectly print the value as $ bpftool m d id 79 [{ "key": 0, "value": { "a": 0x1, "b": 0x1 } } ] This patch fixed the issue by carrying bit_offset along the type chain during bit_field print. The correct result can be printed as $ bpftool m d id 76 [{ "key": 0, "value": { "a": 0x1, "b": 0x2 } } ] The kernel pretty print is implemented correctly and does not have this issue. Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-28tools/bpf: add addition type tests to test_btfYonghong Song
The following additional unit testcases are added to test_btf: ... BTF raw test[42] (typedef (invalid name, name_off = 0)): OK BTF raw test[43] (typedef (invalid name, invalid identifier)): OK BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK BTF raw test[46] (const type (invalid name, name_off <> 0)): OK BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK BTF raw test[50] (array type (invalid name, name_off <> 0)): OK BTF raw test[51] (struct type (name_off = 0)): OK BTF raw test[52] (struct type (invalid name, invalid identifier)): OK BTF raw test[53] (struct member (name_off = 0)): OK BTF raw test[54] (struct member (invalid name, invalid identifier)): OK BTF raw test[55] (enum type (name_off = 0)): OK BTF raw test[56] (enum type (invalid name, invalid identifier)): OK BTF raw test[57] (enum member (invalid name, name_off = 0)): OK BTF raw test[58] (enum member (invalid name, invalid identifier)): OK ... Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-28tools/bpf: fix two test_btf unit test casesMartin KaFai Lau
There are two unit test cases, which should encode TYPEDEF type, but instead encode PTR type. The error is flagged out after enforcing name checking in the previous patch. Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Disable BH while holding list spinlock in nf_conncount, from Taehee Yoo. 2) List corruption in nf_conncount, also from Taehee. 3) Fix race that results in leaving around an empty list node in nf_conncount, from Taehee Yoo. 4) Proper chain handling for inactive chains from the commit path, from Florian Westphal. This includes a selftest for this. 5) Do duplicate rule handles when replacing rules, also from Florian. 6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee. 7) Possible use-after-free in nft_compat when releasing extensions. From Florian. 8) Memory leak in xt_hashlimit, from Taehee. 9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long. 10) Fix cttimeout with udplite and gre, from Florian. 11) Preserve oif for IPv6 link-local generated traffic from mangle table, from Alin Nastac. 12) Missing error handling in masquerade notifiers, from Taehee Yoo. 13) Use mutex to protect registration/unregistration of masquerade extensions in order to prevent a race, from Taehee. 14) Incorrect condition check in tree_nodes_free(), also from Taehee. 15) Fix chain counter leak in rule replacement path, from Taehee. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28x86/speculation: Add prctl() control for indirect branch speculationThomas Gleixner
Add the PR_SPEC_INDIRECT_BRANCH option for the PR_GET_SPECULATION_CTRL and PR_SET_SPECULATION_CTRL prctls to allow fine grained per task control of indirect branch speculation via STIBP and IBPB. Invocations: Check indirect branch speculation status with - prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0); Enable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0); Disable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0); Force disable indirect branch speculation with - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0); See Documentation/userspace-api/spec_ctrl.rst. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Casey Schaufler <casey.schaufler@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jon Masters <jcm@redhat.com> Cc: Waiman Long <longman9394@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Dave Stewart <david.c.stewart@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181125185005.866780996@linutronix.de
2018-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix an off-by-one bug when adjusting subprog start offsets after patching, from Edward. 2) Fix several bugs such as overflow in size allocation in queue / stack map creation, from Alexei. 3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp helper, from Andrey. 4) Fix several bugs in bpftool such as preventing an infinite loop in get_fdinfo, error handling and man page references, from Quentin. 5) Fix a warning in bpf_trace_printk() that wasn't catching an invalid format string, from Martynas. 6) Fix a bug in BPF cgroup local storage where non-atomic allocation was used in atomic context, from Roman. 7) Fix a NULL pointer dereference bug in bpftool from reallocarray() error handling, from Jakub and Wen. 8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools include infrastructure so that bpftool compiles on older RHEL7-like user space which does not ship these headers, from Yonghong. 9) Fix BPF kselftests for user space where to get ping test working with ping6 and ping -6, from Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge tag 'pm-4.20-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues in the Operating Performance Points (OPP) framework, one cpufreq driver issue, one problem related to the tasks freezer and a few build-related issues in the cpupower utility. Specifics: - Fix tasks freezer deadlock in de_thread() that occurs if one of its sub-threads has been frozen already (Chanho Min). - Avoid registering a platform device by the ti-cpufreq driver on platforms that cannot use it (Dave Gerlach). - Fix a mistake in the ti-opp-supply operating performance points (OPP) driver that caused an incorrect reference voltage to be used and make it adjust the minimum voltage dynamically to avoid hangs or crashes in some cases (Keerthy). - Fix issues related to compiler flags in the cpupower utility and correct a linking problem in it by renaming a file with a duplicate name (Jiri Olsa, Konstantin Khlebnikov)" * tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: exec: make de_thread() freezable cpufreq: ti-cpufreq: Only register platform_device when supported opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call opp: ti-opp-supply: Dynamically update u_volt_min tools cpupower: Override CFLAGS assignments tools cpupower debug: Allow to use outside build flags tools/power/cpupower: fix compilation with STATIC=true
2018-11-22tools: bpftool: fix potential NULL pointer dereference in do_loadJakub Kicinski
This patch fixes a possible null pointer dereference in do_load, detected by the semantic patch deref_null.cocci, with the following warning: ./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced. The following code has potential null pointer references: 881 map_replace = reallocarray(map_replace, old_map_fds + 1, 882 sizeof(*map_replace)); 883 if (!map_replace) { 884 p_err("mem alloc failed"); 885 goto err_free_reuse_maps; 886 } ... 1019 err_free_reuse_maps: 1020 for (i = 0; i < old_map_fds; i++) 1021 close(map_replace[i].fd); 1022 free(map_replace); Fixes: 3ff5a4dc5d89 ("tools: bpftool: allow reuse of maps with bpftool prog load") Co-developed-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-21Merge tag 'perf-urgent-for-mingo-4.20-20181121' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes: - Update kernel ABI headers, one of them lead to a small change in the ioctl 'cmd' beautifier in 'perf trace' to support the new ISO7816 commands. (Arnaldo Carvalho de Melo) - Restore proper cwd on return from mnt namespace (Jiri Olsa) - Add feature check for the get_current_dir_name() function used in the namespace fix from Jiri, that is not available in systems such as Alpine Linux, which uses the musl libc (Arnaldo Carvalho de Melo) - Fix crash in 'perf record' when synthesizing the unit for events such as 'cpu-clock' (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-21Merge tag 'linux-cpupower-4.20-rc4' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility updates for 4.20-rc4 from Shuah Khan: "This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow use of outside build flags and override of CFLAGS from Jiri Olsa, and fix to compilation with STATIC=true from Konstantin Khlebnikov." * tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: tools cpupower: Override CFLAGS assignments tools cpupower debug: Allow to use outside build flags tools/power/cpupower: fix compilation with STATIC=true
2018-11-20objtool: Fix segfault in .cold detection with -ffunction-sectionsArtem Savkov
Because find_symbol_by_name() traverses the same lists as read_symbols(), changing sym->name in place without copying it affects the result of find_symbol_by_name(). In the case where a ".cold" function precedes its parent in sec->symbol_list, it can result in a function being considered a parent of itself. This leads to function length being set to 0 and other consequent side-effects including a segfault in add_switch_table(). The effects of this bug are only visible when building with -ffunction-sections in KCFLAGS. Fix by copying the search string instead of modifying it in place. Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-20objtool: Fix double-free in .cold detection error pathArtem Savkov
If read_symbols() fails during second list traversal (the one dealing with ".cold" subfunctions) it frees the symbol, but never deletes it from the list/hash_table resulting in symbol being freed again in elf_close(). Fix it by just returning an error, leaving cleanup to elf_close(). Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-19perf tools beauty ioctl: Support new ISO7816 commandsArnaldo Carvalho de Melo
Introduced in: ad8c0eaa0a41 ("tty/serial_core: add ISO7816 infrastructure") Now 'perf trace' will be able to pretty-print the 'cmd' ioctl arg when used in capable systems with software emitting those commands. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-7bds48dhckfnleie08mit314@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19tools uapi asm-generic: Synchronize ioctls.hArnaldo Carvalho de Melo
To pick up the changes in: ad8c0eaa0a41 ("tty/serial_core: add ISO7816 infrastructure") That is a change that imply a change to be made in tools/perf/trace/beauty/ioctl.c to make 'perf trace' ioctl syscall argument beautifier to support these new commands: TIOCGISO7816 and TIOCSISO7816. This is not yet done automatically by a script like is done for some other headers, for instance: $ tools/perf/trace/beauty/drm_ioctl.sh | head #ifndef DRM_COMMAND_BASE #define DRM_COMMAND_BASE 0x40 #endif static const char *drm_ioctl_cmds[] = { [0x00] = "VERSION", [0x01] = "GET_UNIQUE", [0x02] = "GET_MAGIC", [0x03] = "IRQ_BUSID", [0x04] = "GET_MAP", [0x05] = "GET_CLIENT", $ So we will need to change tools/perf/trace/beauty/ioctl.c in a follow up patch until we switch to a generator script. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zin76fe6iykqsilvo6u47f9o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19tools arch x86: Update tools's copy of cpufeatures.hArnaldo Carvalho de Melo
To get the changes in the following csets: ace6485a0326 ("x86/cpufeatures: Enumerate MOVDIR64B instruction") 33823f4d63f7 ("x86/cpufeatures: Enumerate MOVDIRI instruction") No tools were affected, copy it to silence this perf tool build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: https://lkml.kernel.org/n/tip-83kcyqa1qkxkhm1s7q3hbpel@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19tools headers uapi: Synchronize i915_drm.hArnaldo Carvalho de Melo
To pick up the changes in: 900ccf30f9e1 ("drm/i915: Only force GGTT coherency w/a on required chipsets") No changes are required in tools/ nor does anything gets automatically generated to be used in the 'perf trace' syscall arg beautifiers. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-t2vor2wegv41gt5n49095kly@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19perf tools: Restore proper cwd on return from mnt namespaceJiri Olsa
When reporting on 'record' server we try to retrieve/use the mnt namespace of the profiled tasks. We use following API with cookie to hold the return namespace, roughly: nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc) setns(newns, 0); ... new ns related open.. ... nsinfo__mountns_exit(struct nscookie *nc) setns(nc->oldns) Once finished we setns to old namespace, which also sets the current working directory (cwd) to "/", trashing the cwd we had. This is mostly fine, because we use absolute paths almost everywhere, but it screws up 'perf diff': # perf diff failed to open perf.data: No such file or directory (try 'perf record' first) ... Adding the current working directory to be part of the cookie and restoring it in the nsinfo__mountns_exit call. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 843ff37bb59e ("perf symbols: Find symbols in different mount namespace") Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org [ No need to check for NULL args for free(), use zfree() for struct members ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19tools build feature: Check if get_current_dir_name() is availableArnaldo Carvalho de Melo
As the namespace support code will use this, which is not available in some non _GNU_SOURCE libraries such as Android's bionic used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix some potentially uninitialized variables and use-after-free in kvaser_usb can drier, from Jimmy Assarsson. 2) Fix leaks in qed driver, from Denis Bolotin. 3) Socket leak in l2tp, from Xin Long. 4) RSS context allocation fix in bnxt_en from Michael Chan. 5) Fix cxgb4 build errors, from Ganesh Goudar. 6) Route leaks in ipv6 when removing exceptions, from Xin Long. 7) Memory leak in IDR allocation handling of act_pedit, from Davide Caratti. 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov. 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From Sabrina Dubroca. 10) When NAPI cached skb is reused, we must set it to the proper initial state which includes skb->pkt_type. From Eric Dumazet. 11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy. 12) Set RX queue properly in various tuntap receive paths, from Matthew Cover. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tuntap: fix multiqueue rx ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF tipc: don't assume linear buffer when reading ancillary data tipc: fix lockdep warning when reinitilaizing sockets net-gro: reset skb->pkt_type in napi_reuse_skb() tc-testing: tdc.py: Guard against lack of returncode in executed command tc-testing: tdc.py: ignore errors when decoding stdout/stderr ip_tunnel: don't force DF when MTU is locked MAINTAINERS: Add entry for CAKE qdisc net: bridge: fix vlan stats use-after-free on destruction socket: do a generic_file_splice_read when proto_ops has no splice_read net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs net/sched: act_pedit: fix memory leak when IDR allocation fails net: lantiq: Fix returned value in case of error in 'xrx200_probe()' ipv6: fix a dst leak when removing its exception net: mvneta: Don't advertise 2.5G modes drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo net/mlx4: Fix UBSAN warning of signed integer overflow ...
2018-11-18Merge tag 'libnvdimm-fixes-4.20-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A small batch of fixes for v4.20-rc3. The overflow continuation fix addresses something that has been broken for several releases. Arguably it could wait even longer, but it's a one line fix and this finishes the last of the known address range scrub bug reports. The revert addresses a lockdep regression. The unit tests are not critical to fix, but no reason to hold this fix back. Summary: - Address Range Scrub overflow continuation handling has been broken since it was initially merged. It was only recently that error injection and platform-BIOS support enabled this corner case to be exercised. - The recent attempt to provide more isolation for the kernel Address Range Scrub state machine from userapace initiated sessions triggers a lockdep report. Revert and try again at the next merge window. - Fix a kasan reported buffer overflow in libnvdimm unit test infrastrucutre (nfit_test)" * tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: Revert "acpi, nfit: Further restrict userspace ARS start requests" acpi, nfit: Fix ARS overflow continuation tools/testing/nvdimm: Fix the array size for dimm devices.
2018-11-17tc-testing: tdc.py: Guard against lack of returncode in executed commandBrenda J. Butler
Add some defensive coding in case one of the subprocesses created by tdc returns nothing. If no object is returned from exec_cmd, then tdc will halt with an unhandled exception. Signed-off-by: Brenda J. Butler <bjb@mojatatu.com> Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17tc-testing: tdc.py: ignore errors when decoding stdout/stderrLucas Bates
Prevent exceptions from being raised while decoding output from an executed command. There is no impact on tdc's execution and the verify command phase would fail the pattern match. Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16bpf: fix off-by-one error in adjust_subprog_startsEdward Cree
When patching in a new sequence for the first insn of a subprog, the start of that subprog does not change (it's the first insn of the sequence), so adjust_subprog_starts should check start <= off (rather than < off). Also added a test to test_verifier.c (it's essentially the syz reproducer). Fixes: cc8b0b92a169 ("bpf: introduce function calls (function boundaries)") Reported-by: syzbot+4fc427c7af994b0948be@syzkaller.appspotmail.com Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-16Merge tag 'powerpc-4.20-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two weeks worth of fixes since rc1. - I broke 16-byte alignment of the stack when we moved PPR into pt_regs. Despite being required by the ABI this broke almost nothing, we eventually hit it in code where GCC does arithmetic on the stack pointer assuming the bottom 4 bits are clear. Fix it by padding the in-kernel pt_regs by 8 bytes. - A couple of commits fixing minor bugs in the recent SLB rewrite. - A build fix related to tracepoints in KVM in some configurations. - Our old "IO workarounds" code written for Cell couldn't coexist in a kernel that runs on Power9 with the Radix MMU, fix that. - Remove the NPU DMA ops, these just printed a warning and should never have been called. - Suppress an overly chatty message triggered by CPU hotplug in some configs. - Two small selftest fixes. Thanks to: Alistair Popple, Gustavo Romero, Nicholas Piggin, Satheesh Rajendran, Scott Wood" * tag 'powerpc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Adjust wild_bctr to build with old binutils powerpc/64: Fix kernel stack 16-byte alignment powerpc/numa: Suppress "VPHN is not supported" messages selftests/powerpc: Fix wild_bctr test to work on ppc64 powerpc/io: Fix the IO workarounds code to work with Radix powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel() KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE powerpc/mm/64s: Only use slbfee on CPUs that support it powerpc/mm/64s: Use PPC_SLBFEE macro powerpc/mm/64s: Consolidate SLB assertions powerpc/powernv/npu: Remove NPU DMA ops
2018-11-15selftests/powerpc: Adjust wild_bctr to build with old binutilsGustavo Romero
Currently the selftest wild_bctr can fail to build when an old gcc is used, notably on gcc using a binutils version <= 2.27, because the assembler does not support the integer suffix UL. This patch adjusts the wild_bctr test so the REG_POISON value is still treated as an unsigned long for the shifts on compilation but the UL suffix is absent on the stringification, so the inline asm code generated has no UL suffixes. Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> [mpe: Wrap long line] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-12perf tools: Fix crash on synthesizing the unitJiri Olsa
Adam reported a record command crash for simple session like: $ perf record -e cpu-clock ls with following backtrace: Program received signal SIGSEGV, Segmentation fault. 3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]); (gdb) bt #0 perf_event__synthesize_event_update_unit #1 0x000000000051e469 in perf_event__synthesize_extra_attr #2 0x00000000004445cb in record__synthesize #3 0x0000000000444bc5 in __cmd_record ... We synthesize an update event that needs to touch the evsel id array, which is not defined at that time. Fix this by forcing the id allocation for events with their unit defined. Reflecting possible read_format ID bit in the attr tests. Reported-by: Yongxin Liu <yongxin.liu@outlook.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adam Lee <leeadamrobert@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477 Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update") Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-12selftests: add script to stress-test nft packet path vs. control planeFlorian Westphal
Start flood ping for each cpu while loading/flushing rulesets to make sure we do not access already-free'd rules from nf_tables evaluation loop. Also add this to TARGETS so 'make run_tests' in selftest dir runs it automatically. This would have caught the bug fixed in previous change ("netfilter: nf_tables: do not skip inactive chains during generation update") sooner. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12selftests/powerpc: Fix wild_bctr test to work on ppc64Michael Ellerman
The selftest I recently added to test branching to an out-of-bounds NIP doesn't work on 64-bit big endian. It does fail but not in the right way. That is it SEGVs trying to load from the opd at BAD_NIP, but it never gets as far as branching to BAD_NIP. To fix it we need to create an opd which is reachable but which holds the bad address. Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-09kselftests/bpf: use ping6 as the default ipv6 ping binary when it existsLi Zhijian
At commit deee2cae27d1 ("kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists"), it fixed similar issues for shell script, but it missed a same issue in the C code. Fixes: 371e4fcc9d96 ("selftests/bpf: cgroup local storage-based network counters") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> CC: Philip Li <philip.li@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-09tools: bpftool: update references to other man pages in documentationQuentin Monnet
Update references to other bpftool man pages at the bottom of each manual page. Also reference the "bpf(2)" and "bpf-helpers(7)" man pages. References are sorted by number of man section, then by "prog-and-map-go-first", the other pages in alphabetical order. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-09tools: bpftool: pass an argument to silence open_obj_pinned()Quentin Monnet
Function open_obj_pinned() prints error messages when it fails to open a link in the BPF virtual file system. However, in some occasions it is not desirable to print an error, for example when we parse all links under the bpffs root, and the error is due to some paths actually being symbolic links. Example output: # ls -l /sys/fs/bpf/ lrwxrwxrwx 1 root root 0 Oct 18 19:00 ip -> /sys/fs/bpf/tc/ drwx------ 3 root root 0 Oct 18 19:00 tc lrwxrwxrwx 1 root root 0 Oct 18 19:00 xdp -> /sys/fs/bpf/tc/ # bpftool --bpffs prog show Error: bpf obj get (/sys/fs/bpf): Permission denied Error: bpf obj get (/sys/fs/bpf): Permission denied # strace -e bpf bpftool --bpffs prog show bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/ip", bpf_fd=0}, 72) = -1 EACCES (Permission denied) Error: bpf obj get (/sys/fs/bpf): Permission denied bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/xdp", bpf_fd=0}, 72) = -1 EACCES (Permission denied) Error: bpf obj get (/sys/fs/bpf): Permission denied ... To fix it, pass a bool as a second argument to the function, and prevent it from printing an error when the argument is set to true. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-09tools: bpftool: fix plain output and doc for --bpffs optionQuentin Monnet
Edit the documentation of the -f|--bpffs option to make it explicit that it dumps paths of pinned programs when bpftool is used to list the programs only, so that users do not believe they will see the name of the newly pinned program with "bpftool prog pin" or "bpftool prog load". Also fix the plain output: do not add a blank line after each program block, in order to remain consistent with what bpftool does when the option is not passed. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-09tools: bpftool: prevent infinite loop in get_fdinfo()Quentin Monnet
Function getline() returns -1 on failure to read a line, thus creating an infinite loop in get_fdinfo() if the key is not found. Fix it by calling the function only as long as we get a strictly positive return value. Found by copying the code for a key which is not always present... Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-09tools/bpftool: copy a few net uapi headers to tools directoryYonghong Song
Commit f6f3bac08ff9 ("tools/bpf: bpftool: add net support") added certain networking support to bpftool. The implementation relies on a relatively recent uapi header file linux/tc_act/tc_bpf.h on the host which contains the marco definition of TCA_ACT_BPF_ID. Unfortunately, this is not the case for all distributions. See the email message below where rhel-7.2 does not have an up-to-date linux/tc_act/tc_bpf.h. https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1799211.html Further investigation found that linux/pkt_cls.h is also needed for macro TCA_BPF_TAG. This patch fixed the issue by copying linux/tc_act/tc_bpf.h and linux/pkt_cls.h from kernel include/uapi directory to tools/include/uapi directory so building the bpftool does not depend on host system for these files. Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support") Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-06Merge tag 'perf-urgent-for-mingo-4.20-20181106' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent improvements and fixes from Arnaldo Carvalho de Melo: Intel PT SQL viewer: (Adrian Hunter) - Fall back to /usr/local/lib/libxed.so - Add Selected branches report - Add help window - Fix table find when table re-ordered Intel PT debug log (Adrian Hunter) - Add more event information - Add MTC and CYC timestamps perf record: (Andi Kleen) - Support weak groups, just like with 'perf stat' perf trace: (Arnaldo Carvalho de Melo) - Start augmenting raw_syscalls:{sys_enter,sys_exit}: goal is to have a generic, arch independent eBPF kernel component that is programmed with syscall table details, what to copy, how many bytes, pid, arg filters from the userspace via eBPF maps by the 'perf trace' tool that continues to use all its argument beautifiers, just taking advantage of the extra pointer contents. JVMTI: (Gustavo Romero) - Fix undefined symbol scnprintf in libperf-jvmti.so perf top: (Jin Yao) - Display the LBR stats in callchain entries perf stat: (Thomas Richter) - Handle different PMU names with common prefix arm64: Will (Deacon) - Fix arm64 tools build failure wrt smp_load_{acquire,release}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-06tools cpupower: Override CFLAGS assignmentsJiri Olsa
So user could specify outside CFLAGS values. Cc: Thomas Renninger <trenn@suse.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-11-06tools cpupower debug: Allow to use outside build flagsJiri Olsa
Adding CFLAGS and LDFLAGS to be used during the build. Cc: Thomas Renninger <trenn@suse.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-11-06tools/power/cpupower: fix compilation with STATIC=trueKonstantin Khlebnikov
Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Thomas Renninger <trenn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>