path: root/include/drm/drm_fb_helper.h
AgeCommit message (Collapse)Author
2011-05-16drm: Take lock around probes for drm_fb_helper_hotplug_eventChris Wilson
We need to hold the dev->mode_config.mutex whilst detecting the output status. But we also need to drop it for the call into drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when attaching the fbcon. Failure to do so exposes a race with normal output probing. Detected by adding some warnings that the mutex is held to the backend detect routines: [ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]() [ 17.772458] Hardware name: Latitude E6400 [ 17.772460] Modules linked in: .... [ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W #8 [ 17.772584] Call Trace: [ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c [ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915] [ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper] [ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper] [ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper] [ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper] [ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345 [ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper] [ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e [ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172 [ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82 [ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10 [ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82 [ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10 Reported-by: Frederik Himpe <fhimpe@telenet.be> References: https://bugs.freedesktop.org/show_bug.cgi?id=36394 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-27drm/i915: restore only the mode of this driver on lastclose (v2)Dave Airlie
i915 calls the panic handler function on last close to reset the modes, however this is a really bad idea for multi-gpu machines, esp shareable gpus machines. So add a new entry point for the driver to just restore its own fbcon mode. v2: move code into fb helper, fix panic code to block mode change on powered off GPUs. [airlied: this hits drm core and I wrote it and it was reviewed on intel-gfx so really I signed it off twice ;-).] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-14Revert "drm: Update fbdev fb_fix_screeninfo"Dave Airlie
This reverts commit dfe63bb0ad9810db13aab0058caba97866e0a681. This commit was causing nouveau not to work properly, for -rc1 I'd prefer it worked and we can look if this is useful for 2.6.39. Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-07drm: Update fbdev fb_fix_screeninfoJames Simmons
If you change the color depth via fbset or some other framebuffer aware userland application struct fb_fix_screeninfo is not updated to this new information. This patch fixes this issue. Also the function is changed to just pass in struct drm_framebuffer so in the future we could use more fields. I'm hoping some day fix->smem* could be set here :-) Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-05drm: add KGDB/KDB supportJesse Barnes
Implement the callbacks for KDB entry/exit via the drm helpers. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-18drm/fbdev: rework output polling to be back in the core. (v4)Dave Airlie
After thinking it over a lot it made more sense for the core to deal with the output polling especially so it can notify X. v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings. v3: add config lock take inside polling, add intel/nouveau poll init/fini calls v4: config lock was a bit agressive, only needed around connector list reading. otherwise it could re-enter. glisse: discard drm_helper_hpd_irq_event v3: Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07drm/kms/fb: use slow work mechanism for normal hotplug also.Dave Airlie
a) slow work is always used now for any fbcon hotplug, as its not a fast task and is more suited to being ran under slow work. b) attempt to not do any fbdev changes when X is running as we'll just mess it up. This hooks set_par to hopefully do the changes once X hands control to fbdev. This also adds the nouveau/intel hotplug support. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07drm/kms/fb: add polling support for when nothing is connected.Dave Airlie
When we are running in a headless environment we have no idea what output the user might plug in later, we only have hotplug detect from the digital outputs. So if we detect no connected outputs at initialisation, start a slow work operation to poll every 5 seconds for an output. this is only hooked up for radeon so far, on hw where we have full hotplug detection there is no need for this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07drm/kms/fb: separate fbdev connector list from core drm connectorsDave Airlie
This breaks the connection between the core drm connector list and the fbdev connector usage, and allows them to become disjoint in the future. It also removes the untype void* that was in the connector struct to support this. All connectors are added to the fbdev now but this could be changed in the future. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07drm/kms/fb: move to using fb helper crtc grouping instead of core crtc listDave Airlie
This move to using the list of crtcs in the fb helper and cleans up the whole picking code, now we store the crtc/connectors we want directly into the modeset and we use the modeset directly to set the mode. Fixes from James Simmons and Ben Skeggs. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07drm/fb: fix fbdev object model + cleanup properly.Dave Airlie
The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work. This patch a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs. b) migrated all the fb helper functions out of the crtc helper file into the fb helper file. c) pushed the fb probing/hotplug control into the driver d) makes the surface sizes into a structure for ease of passing This changes the intel/radeon/nouveau drivers to use the new helper. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06drm/fb: add more correct 8/16/24/32 bpp fb support.Dave Airlie
The previous patches had some unwanted side effects, I've fixed the lack of 32bpp working, and fixed up 16bpp so it should also work. this also adds the interface to allow the driver to set a preferred console depth so for example low memory rn50 can set it to 8bpp. It also catches 24bpp on cards that can't do it and forces 32bpp. Tested on r100/r600/i945. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/fb: add setcmap and fix 8-bit support.Dave Airlie
This adds support for the setcmap api and fixes the 8bpp support at least on radeon hardware. It adds a new load_lut hook which can be called once the color map is setup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/kms: start adding command line interface using fb.Dave Airlie
[note this requires an fb patch posted to linux-fbdev-devel already] This uses the normal video= command line option to control the kms output setup at boot time. It is used to override the autodetection done by kms. video= normally takes a framebuffer as the first parameter, in kms it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output connector is specified the mode string will apply to all connectors. The mode specification used will match down the probed modes, and if no mode is found it will add a CVT mode that matches. video=1024x768 - all connectors match a 1024x768 mode or add a CVT on video=VGA-1:1024x768, VGA-1 connector gets mode only. The same strings as used in current fb modedb.c are used, except I've added three more letters, e, D, d, e = enable, D = enable Digital, d = disable, which allow a connector to be forced into a certain state. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/kms: move driver specific fb common code to helper functions (v2)Dave Airlie
Initially I always meant this code to be shared, but things ran away from me before I got to it. This refactors the i915 and radeon kms fbdev interaction layers out into generic helpers + driver specific pieces. It moves all the panic/sysrq enhancements to the core file, and stores a linked list of kernel fbs. This could possibly be improved to only store the fb which has fbcon on it for panics etc. radeon retains some specific codes used for a big endian workaround. changes: fix oops in v1 fix freeing path for crtc_info Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>