aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2016-10-02Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three relatively small fixes for ARM: - Roger noticed that dma_max_pfn() was calculating the upper limit wrongly, by adding the PFN offset of memory twice. - A fix from Robin to correct parsing of MPIDR values when the address size is larger than one BE32 unit. - A fix from Srinivas to ensure that we do not rely on the boot loader (or previous Linux kernel) setting the translation table base register a certain way in the decompressor, which can lead to crashes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 ARM: 8617/1: dma: fix dma_max_pfn() ARM: 8616/1: dt: Respect property size when parsing CPUs
2016-10-02ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7Srinivas Ramana
If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece45894d3a ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-10-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "The last regression fixes for 4.8 final: - Two patches addressing the fallout of the CR4 optimizations which caused CR4-less machines to fail. - Fix the VDSO build on big endian machines - Take care of FPU initialization if no CPUID is available otherwise task struct size ends up being zero - Fix up context tracking in case load_gs_index fails" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 x86/init: Fix cr4_init_shadow() on CR4-less machines
2016-10-02Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Another round of fixes: - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems - CPS: Avoid BUG() when offlining pre-r6 CPUs - DEC: Avoid gas warnings due to suspicious instruction scheduling by manually expanding assembler macros. - FTLB: Fix configuration by moving confiuguratoin after probing - FTLB: clear execution hazard after changing FTLB enable - Highmem: Fix detection of unsupported highmem with cache aliases - I6400: Don't touch FTLBP chicken bits - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE - Malta: Fix IOCU disable switch read for MIPS64 - Octeon: Fix probing of devices attached to GPIO lines - uprobes: Misc small fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS MIPS: clear execution hazard after changing FTLB enable MIPS: Configure FTLB after probing TLB sizes from config4 MIPS: Stop setting I6400 FTLBP MIPS: DEC: Avoid la pseudo-instruction in delay slots MIPS: Octeon: mark GPIO controller node not populated after IRQ init. MIPS: uprobes: fix use of uninitialised variable MIPS: uprobes: remove incorrect set_orig_insn MIPS: fix uretprobe implementation MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs
2016-10-02MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systemsPaul Burton
When discovering the number of VPEs per core, smp_num_siblings will be incorrect for kernels built without support for the MIPS MultiThreading (MT) ASE running on systems which implement said ASE. This leads to accesses to VPEs in secondary cores being performed incorrectly since mips_cm_vp_id calculates the wrong ID to write to the local "other" registers. Fix this by examining the number of VPEs in the core as reported by the CM. This patch presumes that the number of VPEs will be the same in each core of the system. As this path only applies to systems with CM version 2.5 or lower, and this property is true of all such known systems, this is likely to be fine but is described in a comment for good measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-30x86/entry/64: Fix context tracking state warning when load_gs_index failsWanpeng Li
This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUIDAndy Lutomirski
Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by: David Saggiorato <david@saggiorato.net> Tested-by: David Saggiorato <david@saggiorato.net> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30x86/vdso: Fix building on big endian hostSegher Boessenkool
We need to call GET_LE to read hdr->e_type. Fixes: 57f90c3dfc75 ("x86/vdso: Error out if the vDSO isn't a valid DSO") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-next@vger.kernel.org Link: http://lkml.kernel.org/r/20160929193442.GA16617@gate.crashing.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-30x86/boot: Fix another __read_cr4() case on 486Andy Lutomirski
The condition for reading CR4 was wrong: there are some CPUs with CPUID but not CR4. Rather than trying to make the condition exact, use __read_cr4_safe(). Fixes: 18bc7bd523e0 ("x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly") Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/8c453a61c4f44ab6ff43c29780ba04835234d2e5.1475178369.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-29x86/init: Fix cr4_init_shadow() on CR4-less machinesAndy Lutomirski
cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-29MIPS: Fix detection of unsupported highmem with cache aliasesPaul Burton
The paging_init() function contains code which detects that highmem is in use but unsupported due to dcache aliasing. However this code was ineffective because it was being run before the caches are probed, meaning that cpu_has_dc_aliases would always evaluate to false (unless a platform overrides it to a compile-time constant) and the detection of the unsupported case is never triggered. The kernel would then go on to attempt to use highmem & either hit coherency issues or trigger the BUG_ON in flush_kernel_dcache_page(). Fix this by running paging_init() later than cpu_cache_init(), such that the cpu_has_dc_aliases macro will evaluate correctly & the unsupported highmem case will be detected successfully. This then leads to a formerly hidden issue in that mem_init_free_highmem() will attempt to free all highmem pages, even though we're avoiding use of them & don't have valid page structs for them. This leads to an invalid pointer dereference & a TLB exception. Avoid this by skipping the loop in mem_init_free_highmem() if cpu_has_dc_aliases evaluates true. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rabin Vincent <rabinv@axis.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14184/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Malta: Fix IOCU disable switch read for MIPS64Paul Burton
Malta boards used with CPU emulators feature a switch to disable use of an IOCU. Software has to check this switch & ignore any present IOCU if the switch is closed. The read used to do this was unsafe for 64 bit kernels, as it simply casted the address 0xbf403000 to a pointer & dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a 64 bit kernel this attempts to access xuseg & results in an address error exception. Fix by accessing a correctly formed ckseg1 address generated using the CKSEG1ADDR macro. Whilst modifying this code, define the name of the register and the bit we care about within it, which indicates whether PCI DMA is routed to the IOCU or straight to DRAM. The code previously checked that bit 0 was also set, but the least significant 7 bits of the CONFIG_GEN0 register contain the value of the MReqInfo signal provided to the IOCU OCP bus, so singling out bit 0 makes little sense & that part of the check is dropped. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b6d92b4a6bdb ("MIPS: Add option to disable software I/O coherency.") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPSPaul Burton
When the kernel is built for microMIPS, branches targets need to be known to be microMIPS code in order to result in bit 0 of the PC being set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply the end of the macro, which may be pointing at padding rather than at code. This results in recent enough GNU linkers complaining like so: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes. mips-img-linux-gnu-ld: final link failed: Bad value Makefile:936: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Fix this by changing the branch target to be the start of the appropriate handler, skipping over any padding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: clear execution hazard after changing FTLB enablePaul Burton
On current P-series cores from Imagination the FTLB can be enabled or disabled via a bit in the Config6 register, and an execution hazard is created by changing the value of bit. The ftlb_disable function already cleared that hazard but that does no good for other callers. Clear the hazard in the set_ftlb_enable function that creates it, and only for the cores where it applies. This has the effect of reverting c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") which was incorrect. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Configure FTLB after probing TLB sizes from config4Paul Burton
On some cores (proAptiv, P5600) we make use of the sizes of the TLBs to determine the desired FTLB:VTLB write ratio. However set_ftlb_enable & thus calculate_ftlb_probability is called before decode_config4. This results in us calculating a probability based on zero sizes, and we end up setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio in all cases. This will make abysmal use of the available FTLB resources in the affected cores. Fix this by configuring the FTLB probability after having decoded config4. However we do need to have enabled the FTLB before that point such that fields in config4 actually reflect that an FTLB is present. So set_ftlb_enable is now called twice, with flags indicating that it should configure the write probability only the second time. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: cf0a8aa0226d ("MIPS: cpu-probe: Set the FTLB probability bit on supported cores") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Stop setting I6400 FTLBPPaul Burton
The FTLBP field in Config7 for the I6400 is intended as chicken bits for debugging rather than as a field that software actually makes use of. For best performance, FTLBP should be left at its default value of 0 with all TLB writes hitting the FTLB by default. Additionally, since set_ftlb_enable is called from decode_configs before decode_config4 which determines the size of the TLBs, this was previously always setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio which makes abysmal use of the available FTLB resources. This effectively reverts b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400"). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14021/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: DEC: Avoid la pseudo-instruction in delay slotsRalf Baechle
When expanding the la or dla pseudo-instruction in a delay slot the GNU assembler will complain should the pseudo-instruction expand to multiple actual instructions, since only the first of them will be in the delay slot leading to the pseudo-instruction being only partially executed if the branch is taken. Use of PTR_LA in the dec int-handler.S leads to such warnings: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot Avoid this by open coding the PTR_LA macros. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Octeon: mark GPIO controller node not populated after IRQ init.Steven J. Hill
We clear the OF_POPULATED flag for the GPIO controller node on Octeon processors. Otherwise, none of the devices hanging on the GPIO lines are probed. The 'gpio-leds' driver on OCTEON failed to probe in addition to other devices on Cavium 71xx and 78xx development boards. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: uprobes: fix use of uninitialised variableMarcin Nowakowski
arch_uprobe_pre_xol needs to emulate a branch if a branch instruction has been replaced with a breakpoint, but in fact an uninitialised local variable was passed to the emulator routine instead of the original instruction Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14300/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: uprobes: remove incorrect set_orig_insnMarcin Nowakowski
Generic kernel code implements a weak version of set_orig_insn that moves cached 'insn' from arch_uprobe to the original code location when the trap is removed. MIPS variant used arch_uprobe->orig_inst which was never initialised properly, so this code only inserted a nop instead of the original instruction. With that change orig_inst can also be safely removed. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14299/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: fix uretprobe implementationMarcin Nowakowski
arch_uretprobe_hijack_return_addr should replace the return address for a call with a trampoline address. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14298/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUsMatt Redfearn
Commit 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors") added a call to mips_cm_lock_other in order to lock the CPC in CPUs containing a version 3 or higher Coherence Manager, which use the general CM core other register, where previous CMs had a dedicated core other register for the CPC. A kernel BUG() is triggered, however, if mips_cm_lock_other is called with a VP other than 0 on a CPU with CM < 3, a condition introduced by 0d2808f338c7. Avoid the BUG() by always locking VP0 when locking the CPC, since the required register, cpc_stat_conf, is shared by all vps in a core. Fixes: 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug...) Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14297/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29ARM: 8617/1: dma: fix dma_max_pfn()Roger Quadros
Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-29ARM: 8616/1: dt: Respect property size when parsing CPUsRobin Murphy
Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-28sparc64: Fix non-SMP build.David S. Miller
Need to provide a dummy smp_fill_in_cpu_possible_map. Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64: Fix irq stack bootmem allocation.Atish Patra
Currently, irq stack bootmem is allocated for all possible cpus before nr_cpus value changes the list of possible cpus. As a result, there is unnecessary wastage of bootmemory. Move the irq stack bootmem allocation so that it happens after possible cpu list is modified based on nr_cpus value. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64: Fix cpu_possible_mask if nr_cpus is setAtish Patra
If kernel boot parameter nr_cpus is set, it should define the number of CPUs that can ever be available in the system i.e. cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based on the cpu_possible_mask during kernel initialization. If cpu_possible_mask is not set based on the nr_cpus value, earlier part of the kernel would be initialized using nr_cpus value leading to a kernel crash. Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids() becomes redundant and does not corrupt nr_cpu_ids value. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64 mm: Fix more TSB sizing issuesMike Kravetz
Commit af1b1a9b36b8 ("sparc64 mm: Fix base TSB sizing when hugetlb pages are used") addressed the difference between hugetlb and THP pages when computing TSB sizes. The following additional issues were also discovered while working with the code. In order to save memory, THP makes use of a huge zero page. This huge zero page does not count against a task's RSS, but it does consume TSB entries. This is similar to hugetlb pages. Therefore, count huge zero page entries in hugetlb_pte_count. Accounting of THP pages is done in the routine set_pmd_at(). Unfortunately, this does not catch the case where a THP page is split. To handle this case, decrement the count in pmdp_invalidate(). pmdp_invalidate is only called when splitting a THP. However, 'sanity checks' are added in case it is ever called for other purposes. A more general issue exists with HPAGE_SIZE accounting. hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages. This value is used to size the TSB for HPAGE_SIZE pages. However, each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages. The TSB contains an entry for each REAL_HPAGE_SIZE page. Therefore, the number of REAL_HPAGE_SIZE pages should be used to size the huge page TSB. A new compile time constant REAL_HPAGE_PER_HPAGE is used to multiply hugetlb_pte_count before sizing the TSB. Changes from V1 - Fixed build issue if hugetlb or THP not configured Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64: fix section mismatch in find_numa_latencies_for_groupPaul Gortmaker
To fix: WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in reference from the function find_numa_latencies_for_group() to the function .init.text:find_mlgroup() The function find_numa_latencies_for_group() references the function __init find_mlgroup(). This is often because find_numa_latencies_for_group lacks a __init annotation or the annotation of find_mlgroup is wrong. It turns out find_numa_latencies_for_group is only called from: static int __init numa_parse_mdesc(void) and hence we can tag find_numa_latencies_for_group with __init. In doing so we see that find_best_numa_node_for_mlgroup is only called from within __init and hence can also be marked with __init. Cc: "David S. Miller" <davem@davemloft.net> Cc: Nitin Gupta <nitin.m.gupta@oracle.com> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: sparclinux@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "A round of 4.8 fixes: MIPS generic code: - Add a missing ".set pop" in an early commit - Fix memory regions reaching top of physical - MAAR: Fix address alignment - vDSO: Fix Malta EVA mapping to vDSO page structs - uprobes: fix incorrect uprobe brk handling - uprobes: select HAVE_REGS_AND_STACK_ACCESS_API - Avoid a BUG warning during PR_SET_FP_MODE prctl - SMP: Fix possibility of deadlock when bringing CPUs online - R6: Remove compact branch policy Kconfig entries - Fix size calc when avoiding IPIs for small icache flushes - Fix pre-r6 emulation FPU initialisation - Fix delay slot emulation count in debugfs ATH79: - Fix test for error return of clk_register_fixed_factor. Octeon: - Fix kernel header to work for VDSO build. - Fix initialization of platform device probing. paravirt: - Fix undefined reference to smp_bootstrap" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online MIPS: Fix pre-r6 emulation FPU initialisation MIPS: vDSO: Fix Malta EVA mapping to vDSO page structs MIPS: Select HAVE_REGS_AND_STACK_ACCESS_API MIPS: Octeon: Fix platform bus probing MIPS: Octeon: mangle-port: fix build failure with VDSO code MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...) MIPS: c-r4k: Fix size calc when avoiding IPIs for small icache flushes MIPS: Add a missing ".set pop" in an early commit MIPS: paravirt: Fix undefined reference to smp_bootstrap MIPS: Remove compact branch policy Kconfig entries MIPS: MAAR: Fix address alignment MIPS: Fix memory regions reaching top of physical MIPS: uprobes: fix incorrect uprobe brk handling MIPS: ath79: Fix test for error return of clk_register_fixed_factor().
2016-09-25Merge tag 'powerpc-4.8-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull one more powerpc fix from Michael Ellerman: "powernv/pci: Fix m64 checks for SR-IOV and window alignment from Russell Currey" * tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment
2016-09-25MIPS: Fix delay slot emulation count in debugfsPaul Burton
Commit 432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions") accidentally removed use of the MIPS_FPU_EMU_INC_STATS macro from do_dsemulret, leading to the ds_emul file in debugfs always returning zero even though we perform delay slot emulations. Fix this by re-adding the use of the MIPS_FPU_EMU_INC_STATS macro. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14301/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-25MIPS: SMP: Fix possibility of deadlock when bringing CPUs onlineMatt Redfearn
This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reported-by: Justin Chen <justinpopo6@gmail.com> Tested-by: Justin Chen <justinpopo6@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14302/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-24Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixlets for perf: - add a missing NULL pointer check in the intel BTS driver - make BTS an exclusive PMU because BTS can only handle one event at a time - ensure that exclusive events are limited to one PMU so that several exclusive events can be scheduled on different PMU instances" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Limit matching exclusive events to one PMU perf/x86/intel/bts: Make it an exclusive PMU perf/x86/intel/bts: Make sure debug store is valid
2016-09-24Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two smallish fixes: - use the proper asm constraint in the Super-H atomic_fetch_ops - a trivial typo fix in the Kconfig help text" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP()
2016-09-24Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Two fixes for EFI/PAT: - a 32bit overflow bug in the PAT code which was unearthed by the large EFI mappings - prevent a boot hang on large systems when EFI mixed mode is enabled but not used" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Only map RAM into EFI page tables if in mixed-mode x86/mm/pat: Prevent hang during boot when mapping pages
2016-09-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "A couple of last-minute arm64 fixes for 4.8: - Fix secondary CPU to NUMA node assignment - Fix kgdb breakpoint insertion in read-only text sections (when CONFIG_DEBUG_RODATA or CONFIG_DEBUG_SET_MODULE_RONX are enabled)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier.
2016-09-23MIPS: Fix pre-r6 emulation FPU initialisationPaul Burton
In the mipsr2_decoder() function, used to emulate pre-MIPSr6 instructions that were removed in MIPSr6, the init_fpu() function is called if a removed pre-MIPSr6 floating point instruction is the first floating point instruction used by the task. However, init_fpu() performs varous actions that rely upon not being migrated. For example in the most basic case it sets the coprocessor 0 Status.CU1 bit to enable the FPU & then loads FP register context into the FPU registers. If the task were to migrate during this time, it may end up attempting to load FP register context on a different CPU where it hasn't set the CU1 bit, leading to errors such as: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 Fix this by disabling preemption around the call to init_fpu(), ensuring that it starts & completes on one CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: https://patchwork.linux-mips.org/patch/14305/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-23arm64: kgdb: handle read-only text / modulesAKASHI Takahiro
Handle read-only cases when CONFIG_DEBUG_RODATA (4.0) or CONFIG_DEBUG_SET_MODULE_RONX (3.18) are enabled by using aarch64_insn_write() instead of probe_kernel_write() as introduced by commit 2f896d586610 ("arm64: use fixmap for text patching") in 4.0. Fixes: 11d91a770f1f ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-23arm64: Call numa_store_cpu_info() earlier.David Daney
The wq_numa_init() function makes a private CPU to node map by calling cpu_to_node() early in the boot process, before the non-boot CPUs are brought online. Since the default implementation of cpu_to_node() returns zero for CPUs that have never been brought online, the workqueue system's view is that *all* CPUs are on node zero. When the unbound workqueue for a non-zero node is created, the tsk_cpus_allowed() for the worker threads is the empty set because there are, in the view of the workqueue system, no CPUs on non-zero nodes. The code in try_to_wake_up() using this empty cpumask ends up using the cpumask empty set value of NR_CPUS as an index into the per-CPU area pointer array, and gets garbage as it is one past the end of the array. This results in: [ 0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4 [ 1.970095] pgd = fffffc00094b0000 [ 1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000 [ 1.982610] Internal error: Oops: 96000004 [#1] SMP [ 1.987541] Modules linked in: [ 1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G W 4.8.0-rc6-preempt-vol+ #9 [ 1.999435] Hardware name: Cavium ThunderX CN88XX board (DT) [ 2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000 [ 2.011158] PC is at try_to_wake_up+0x194/0x34c [ 2.015737] LR is at try_to_wake_up+0x150/0x34c [ 2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5 [ 2.027803] sp : fffffe0fe8b8fb10 [ 2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000 [ 2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000 [ 2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200 [ 2.047270] x23: 00000000000000c0 x22: 0000000000000004 [ 2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000 [ 2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000 [ 2.063386] x17: 0000000000000000 x16: 0000000000000000 [ 2.068760] x15: 0000000000000018 x14: 0000000000000000 [ 2.074133] x13: 0000000000000000 x12: 0000000000000000 [ 2.079505] x11: 0000000000000000 x10: 0000000000000000 [ 2.084879] x9 : 0000000000000000 x8 : 0000000000000000 [ 2.090251] x7 : 0000000000000040 x6 : 0000000000000000 [ 2.095621] x5 : ffffffffffffffff x4 : 0000000000000000 [ 2.100991] x3 : 0000000000000000 x2 : 0000000000000000 [ 2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80 [ 2.111737] [ 2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020) [ 2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000) [ 2.125914] fb00: fffffe0fe8b8fb80 fffffc00080e7648 . . . [ 2.442859] Call trace: [ 2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70) [ 2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468 [ 2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64 [ 2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000 [ 2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000 [ 2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4 [ 2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000 [ 2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040 [ 2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018 [ 2.523156] fa60: 0000000000000000 0000000000000000 [ 2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c [ 2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34 [ 2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c [ 2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0 [ 2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4 [ 2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c [ 2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168 [ 2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4 [ 2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148 [ 2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8 [ 2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0 [ 2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50 [ 2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821) [ 2.603464] ---[ end trace 58c0cd36b88802bc ]--- [ 2.608138] Kernel panic - not syncing: Fatal exception Fix by moving call to numa_store_cpu_info() for all CPUs into smp_prepare_cpus(), which happens before wq_numa_init(). Since smp_store_cpu_info() now contains only a single function call, simplify by removing the function and out-lining its contents. Suggested-by: Robert Richter <rric@kernel.org> Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.") Cc: <stable@vger.kernel.org> # 4.7.x- Signed-off-by: David Daney <david.daney@cavium.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Tested-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-22perf/x86/intel/bts: Make it an exclusive PMUAlexander Shishkin
Just like intel_pt, intel_bts can only handle one event at a time, which is the reason we introduced PERF_PMU_CAP_EXCLUSIVE in the first place. However, at the moment one can have as many intel_bts events within the same context at the same time as one pleases. Only one of them, however, will get scheduled and receive the actual trace data. Fix this by making intel_bts an "exclusive" PMU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160920154811.3255-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-22locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP()Peter Zijlstra
We cannot use the "z" constraint twice, since its a single register (r0). Change the one not used by movli.l/movco.l to "r". Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-21MIPS: vDSO: Fix Malta EVA mapping to vDSO page structsJames Hogan
The page structures associated with the vDSO pages in the kernel image are calculated using virt_to_page(), which uses __pa() under the hood to find the pfn associated with the virtual address. The vDSO data pointers however point to kernel symbols, so __pa_symbol() should really be used instead. Since there is no equivalent to virt_to_page() which uses __pa_symbol(), fix init_vdso_image() to work directly with pfns, calculated with __phys_to_pfn(__pa_symbol(...)). This issue broke the Malta Enhanced Virtual Addressing (EVA) configuration which has a non-default implementation of __pa_symbol(). This is because it uses a physical alias so that the kernel executes from KSeg0 (VA 0x80000000 -> PA 0x00000000), while RAM is provided to the kernel in the KUSeg range (VA 0x00000000 -> PA 0x80000000) which uses the same underlying RAM. Since there are no page structures associated with the low physical address region, some arbitrary kernel memory would be interpreted as a page structure for the vDSO pages and badness ensues. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/14229/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-21powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignmentRussell Currey
Commit 5958d19a143e checks for prefetchable m64 BARs by comparing the addresses instead of using resource flags. This broke SR-IOV as the m64 check in pnv_pci_ioda_fixup_iov_resources() fails. The condition in pnv_pci_window_alignment() also changed to checking only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and IORESOURCE_PREFETCH. Revert these cases to the previous behaviour, adding a new helper function to do so. This is named pnv_pci_is_m64_flags() to make it clear this function is only looking at resource flags and should not be relied on for non-SRIOV resources. Fixes: 5958d19a143e ("Fix incorrect PE reservation attempt on some 64-bit BARs") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Russell Currey <ruscur@russell.cc> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-20Merge tag 'efi-urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent Pull EFI fixes from Matt Fleming: * Fix a boot hang on large memory machines (multiple terabyte) caused by type conversion errors in the x86 PAT code (Matt Fleming) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20perf/x86/intel/bts: Make sure debug store is validSebastian Andrzej Siewior
Since commit 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection") my box goes boom on boot: | .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 | BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 | IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130 | Call Trace: | <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0 | [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40 This happens because the code introduced in this commit dereferences the debug store pointer unconditionally. The debug store is not guaranteed to be available, so a NULL pointer check as on other places is required. Fixes: 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: vince@deater.net Cc: eranian@google.com Link: http://lkml.kernel.org/r/20160920131220.xg5pbdjtznszuyzb@breakpoint.cc Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-20x86/efi: Only map RAM into EFI page tables if in mixed-modeMatt Fleming
Waiman reported that booting with CONFIG_EFI_MIXED enabled on his multi-terabyte HP machine results in boot crashes, because the EFI region mapping functions loop forever while trying to map those regions describing RAM. While this patch doesn't fix the underlying hang, there's really no reason to map EFI_CONVENTIONAL_MEMORY regions into the EFI page tables when mixed-mode is not in use at runtime. Reported-by: Waiman Long <waiman.long@hpe.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> CC: Theodore Ts'o <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-20x86/mm/pat: Prevent hang during boot when mapping pagesMatt Fleming
There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data types used for keeping track of how many pages have been mapped. This leads to hangs during boot when mapping large numbers of pages (multiple terabytes, as reported by Waiman) because those values are interpreted as being negative. commit 742563777e8d ("x86/mm/pat: Avoid truncation when converting cpa->numpages to address") fixed one of those bugs, but there is another lurking in __change_page_attr_set_clr(). Additionally, the return value type for the populate_*() functions can return negative values when a large number of pages have been mapped, triggering the error paths even though no error occurred. Consistently use 64-bit types on 64-bit platforms when counting pages. Even in the signed case this gives us room for regions 8PiB (pebibytes) in size whilst still allowing the usual negative value error checking idiom. Reported-by: Waiman Long <waiman.long@hpe.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> CC: Theodore Ts'o <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-19Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a potential weakness in IPsec CBC IV generation, as well as a number of issues that arose out of an OOM crash on ARM with CTR-mode AES" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/aes-ctr - fix NULL dereference in tail processing crypto: arm/aes-ctr - fix NULL dereference in tail processing crypto: skcipher - Fix blkcipher walk OOM crash crypto: echainiv - Replace chaining with multiplication
2016-09-19MIPS: Select HAVE_REGS_AND_STACK_ACCESS_APIMarcin Nowakowski
Add lost Kconfig symbol. This should have been part of 40e084a506eb ('MIPS: Add uprobes support.'). Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>