aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-02Linux 4.8v4.8Linus Torvalds
2016-10-02Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three relatively small fixes for ARM: - Roger noticed that dma_max_pfn() was calculating the upper limit wrongly, by adding the PFN offset of memory twice. - A fix from Robin to correct parsing of MPIDR values when the address size is larger than one BE32 unit. - A fix from Srinivas to ensure that we do not rely on the boot loader (or previous Linux kernel) setting the translation table base register a certain way in the decompressor, which can lead to crashes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 ARM: 8617/1: dma: fix dma_max_pfn() ARM: 8616/1: dt: Respect property size when parsing CPUs
2016-10-02ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7Srinivas Ramana
If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece45894d3a ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-10-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "The last regression fixes for 4.8 final: - Two patches addressing the fallout of the CR4 optimizations which caused CR4-less machines to fail. - Fix the VDSO build on big endian machines - Take care of FPU initialization if no CPUID is available otherwise task struct size ends up being zero - Fix up context tracking in case load_gs_index fails" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 x86/init: Fix cr4_init_shadow() on CR4-less machines
2016-10-02Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Another round of fixes: - CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems - CPS: Avoid BUG() when offlining pre-r6 CPUs - DEC: Avoid gas warnings due to suspicious instruction scheduling by manually expanding assembler macros. - FTLB: Fix configuration by moving confiuguratoin after probing - FTLB: clear execution hazard after changing FTLB enable - Highmem: Fix detection of unsupported highmem with cache aliases - I6400: Don't touch FTLBP chicken bits - microMIPS: Fix BUILD_ROLLBACK_PROLOGUE - Malta: Fix IOCU disable switch read for MIPS64 - Octeon: Fix probing of devices attached to GPIO lines - uprobes: Misc small fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS MIPS: clear execution hazard after changing FTLB enable MIPS: Configure FTLB after probing TLB sizes from config4 MIPS: Stop setting I6400 FTLBP MIPS: DEC: Avoid la pseudo-instruction in delay slots MIPS: Octeon: mark GPIO controller node not populated after IRQ init. MIPS: uprobes: fix use of uninitialised variable MIPS: uprobes: remove incorrect set_orig_insn MIPS: fix uretprobe implementation MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUs
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) Fix section mismatches in some builds, from Paul Gortmaker. 2) Need to count huge zero page mappings when doing TSB sizing, from Mike Kravetz. 3) Fix handing of cpu_possible_mask when nr_cpus module option is specified, from Atish Patra. 4) Don't allocate irq stacks until nr_irqs has been processed, also from Atish Patra. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix non-SMP build. sparc64: Fix irq stack bootmem allocation. sparc64: Fix cpu_possible_mask if nr_cpus is set sparc64 mm: Fix more TSB sizing issues sparc64: fix section mismatch in find_numa_latencies_for_group
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix wrong TCP checksums on MTU probing when checksum offloading is disabled, from Douglas Caetano dos Santos. 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang. 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(), fix from Lance Richardson. 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6, fix from Nikolay Aleksandrov. 5) Fix packet alignment in fec driver, from Eric Nelson. 6) Fix perf regression in sctp due to struct layout and cache misses, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() act_ife: Fix false encoding act_ife: Fix external mac header on encode VSOCK: Don't dec ack backlog twice for rejected connections Revert "net: ethernet: bcmgenet: use phydev from struct net_device" net: fec: align IP header in hardware net: fec: remove QUIRK_HAS_RACC from i.mx27 net: fec: remove QUIRK_HAS_RACC from i.mx25 ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() tcp: fix a compile error in DBGUNDO() tcp: fix wrong checksum calculation on MTU probing sch_sfb: keep backlog updated with qlen sch_qfq: keep backlog updated with qlen can: dev: fix deadlock reported after bus-off
2016-10-02MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systemsPaul Burton
When discovering the number of VPEs per core, smp_num_siblings will be incorrect for kernels built without support for the MIPS MultiThreading (MT) ASE running on systems which implement said ASE. This leads to accesses to VPEs in secondary cores being performed incorrectly since mips_cm_vp_id calculates the wrong ID to write to the local "other" registers. Fix this by examining the number of VPEs in the core as reported by the CM. This patch presumes that the number of VPEs will be the same in each core of the system. As this path only applies to systems with CM version 2.5 or lower, and this property is true of all such known systems, this is likely to be fine but is described in a comment for good measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One final fix before 4.8. There was a memory leak triggered by turning scsi mq off due to the fact that we assume on host release that the already running hosts weren't mq based because that's the state of the global flag (even though they were). Fix it by tracking this on a per host host basis" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Avoid that toggling use_blk_mq triggers a memory leak
2016-09-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks
2016-09-30Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
2016-09-30include/linux/property.h: fix typo/compile errorJohn Youn
This fixes commit d76eebfa175e ("include/linux/property.h: fix build issues with gcc-4.4.4"). With that commit we get the following compile error when using the PROPERTY_ENTRY_INTEGER_ARRAY macro. include/linux/property.h:201:39: error: `u32_data' undeclared (first use in this function) PROPERTY_ENTRY_INTEGER_ARRAY(_name_, u32, _val_) ^ include/linux/property.h:193:17: note: in definition of macro `PROPERTY_ENTRY_INTEGER_ARRAY' { .pointer = { _type_##_data = _val_ } }, \ ^ This needs a '.' to reference the union member. It seems this was just overlooked here since it is done correctly in similar constructs in other parts of the original commit. This fix is in preparation of upcoming commits that will use this macro. Fixes: commit d76eebfa175e ("include/linux/property.h: fix build issues with gcc-4.4.4") Link: http://lkml.kernel.org/r/2de3b929290d88a723ed829a3e3cbd02044714df.1475114627.git.johnyoun@synopsys.com Signed-off-by: John Youn <johnyoun@synopsys.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()Eric Ren
The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally. In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it; there are 2 process repeatedly performing the following operations respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a', 1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then ftruncate(fd, CLUSTER_SIZE) again and again. This is the backtrace when the deadlock happens: __wait_on_bit_lock+0x50/0xa0 __lock_page+0xb7/0xc0 ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2] ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2] do_page_mkwrite+0x66/0xc0 handle_mm_fault+0x685/0x1350 __do_page_fault+0x1d8/0x4d0 trace_do_page_fault+0x37/0xf0 do_async_page_fault+0x19/0x70 async_page_fault+0x28/0x30 In ocfs2_write_begin_nolock(), we first grab the pages and then allocate disk space for this write; ocfs2_try_to_free_truncate_log() will be called if -ENOSPC is returned; if we're lucky to get enough clusters, which is usually the case, we start over again. But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we will deadlock when trying to grab the target page again. Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write(). Another deadlock will happen in __do_page_mkwrite() if ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a locked target page. These two errors fail on the same path, so fix them by unlocking the target page manually before ocfs2_free_write_ctxt(). Jan Kara helps me clear out the JBD2 part, and suggest the hint for root cause. Changes since v1: 1. Also put ENOMEM error case into consideration. Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: He Gang <ghe@suse.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30mm: workingset: fix crash in shadow node shrinker caused by ↵Johannes Weiner
replace_page_cache_page() Antonio reports the following crash when using fuse under memory pressure: kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346! invalid opcode: 0000 [#1] SMP Modules linked in: all of them CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000 RIP: shadow_lru_isolate+0x181/0x190 Call Trace: __list_lru_walk_one.isra.3+0x8f/0x130 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x34/0x50 shrink_slab.part.40+0x1ed/0x3d0 shrink_zone+0x2ca/0x2e0 kswapd+0x51e/0x990 kthread+0xd8/0xf0 ret_from_fork+0x3f/0x70 which corresponds to the following sanity check in the shadow node tracking: BUG_ON(node->count & RADIX_TREE_COUNT_MASK); The workingset code tracks radix tree nodes that exclusively contain shadow entries of evicted pages in them, and this (somewhat obscure) line checks whether there are real pages left that would interfere with reclaim of the radix tree node under memory pressure. While discussing ways how fuse might sneak pages into the radix tree past the workingset code, Miklos pointed to replace_page_cache_page(), and indeed there is a problem there: it properly accounts for the old page being removed - __delete_from_page_cache() does that - but then does a raw raw radix_tree_insert(), not accounting for the replacement page. Eventually the page count bits in node->count underflow while leaving the node incorrectly linked to the shadow node LRU. To address this, make sure replace_page_cache_page() uses the tracked page insertion code, page_cache_tree_insert(). This fixes the page accounting and makes sure page-containing nodes are properly unlinked from the shadow node LRU again. Also, make the sanity checks a bit less obscure by using the helpers for checking the number of pages and shadows in a radix tree node. Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Antonio SJ Musumeci <trapexit@spawn.link> Debugged-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30MAINTAINERS: Switch to kernel.org email address for Javi MerinoJavi Merino
Change my email address to my kernel.org account instead of the ARM one. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30x86/entry/64: Fix context tracking state warning when load_gs_index failsWanpeng Li
This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUIDAndy Lutomirski
Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by: David Saggiorato <david@saggiorato.net> Tested-by: David Saggiorato <david@saggiorato.net> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30x86/vdso: Fix building on big endian hostSegher Boessenkool
We need to call GET_LE to read hdr->e_type. Fixes: 57f90c3dfc75 ("x86/vdso: Error out if the vDSO isn't a valid DSO") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-next@vger.kernel.org Link: http://lkml.kernel.org/r/20160929193442.GA16617@gate.crashing.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-30x86/boot: Fix another __read_cr4() case on 486Andy Lutomirski
The condition for reading CR4 was wrong: there are some CPUs with CPUID but not CR4. Rather than trying to make the condition exact, use __read_cr4_safe(). Fixes: 18bc7bd523e0 ("x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly") Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/8c453a61c4f44ab6ff43c29780ba04835234d2e5.1475178369.git.luto@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-30sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lockXin Long
When sctp dumps all the ep->assocs, it needs to lock_sock first, but now it locks sock in rcu_read_lock, and lock_sock may sleep, which would break rcu_read_lock. This patch is to get and hold one sock when traversing the list. After that and get out of rcu_read_lock, lock and dump it. Then it will traverse the list again to get the next one until all sctp socks are dumped. For sctp_diag_dump_one, it fixes this issue by holding asoc and moving cb() out of rcu_read_lock in sctp_transport_lookup_process. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge branch 'sctp-fixes'David S. Miller
Xin Long says: ==================== sctp: a bunch of fixes for prsctp polices This patchset is to fix 2 issues for prsctp polices: 1. patch 1 and 2 fix "netperf-Throughput_Mbps -37.2% regression" issue when overloading the CPU. 2. patch 3 fix "prsctp polices should check both sides' prsctp_capable, instead of only local side". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: change to check peer prsctp_capable when using prsctp policesXin Long
Now before using prsctp polices, sctp uses asoc->prsctp_enable to check if prsctp is enabled. However asoc->prsctp_enable is set only means local host support prsctp, sctp should not abandon packet if peer host doesn't enable prsctp. So this patch is to use asoc->peer.prsctp_capable to check if prsctp is enabled on both side, instead of asoc->prsctp_enable, as asoc's peer.prsctp_capable is set only when local and peer both enable prsctp. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: remove prsctp_param from sctp_chunkXin Long
Now sctp uses chunk->prsctp_param to save the prsctp param for all the prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk. We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices, and reuse msg->expires_at for TTL policy, as the prsctp polices and old expires policy are mutual exclusive. This patch is to remove prsctp_param from sctp_chunk, and reuse msg's expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF polices. Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy, as it needs a u64 variables to save the expires_at time. This one also fixes the "netperf-Throughput_Mbps -37.2% regression" issue. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30sctp: move sent_count to the memory hole in sctp_chunkXin Long
Now pahole sctp_chunk, it has 2 memory holes: struct sctp_chunk { struct list_head list; atomic_t refcnt; /* XXX 4 bytes hole, try to pack */ ... long unsigned int prsctp_param; int sent_count; /* XXX 4 bytes hole, try to pack */ This patch is to move up sent_count to fill the 1st one and eliminate the 2nd one. It's not just another struct compaction, it also fixes the "netperf- Throughput_Mbps -37.2% regression" issue when overloading the CPU. Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30tg3: Avoid NULL pointer dereference in tg3_io_error_detected()Milton Miller
While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-29Merge tag 'drm-fixes-for-v4.8-final' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "drm fixes for final 4.8. One big regression fix for udl, along with two amdgpu fixes and two nouveau fixes. All seems pretty safe and useful" * tag 'drm-fixes-for-v4.8-final' of git://people.freedesktop.org/~airlied/linux: drm/udl: fix line iterator in damage handling drm/radeon/si/dpm: add workaround for for Jet parts drm/amdgpu: disable CRTCs before teardown drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
2016-09-29Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Four fixes for "flush hint" support. Flush hints are addresses advertised by the ACPI 6+ NFIT (NVDIMM Firmware Interface Table) that when written and fenced guarantee that writes pending in platform write buffers (outside the cpu) have been flushed to media. They might also be used by hypervisors as a trigger condition to flush guest-persistent memory ranges to storage. Fix a potential data corruption issue, a broken definition of the hint array, a wrong allocation size for the unit test implementation of the flush hint table, and missing NULL check in an error path. The unit test, while it did not prevent these bugs from being merged, at least triggered occasional crashes in advance of production usages. - Fix handling of ACPI DSM error status results. The DSM mechanism allows communication with platform and memory device firmware. We correctly parse known errors, but were silently ignoring others. Fix it to consistently fail any command with a non-zero status return that we otherwise do not interpret / handle. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, region: fix flush hint table thinko nfit: fail DSMs that return non-zero status by default libnvdimm: fix devm_nvdimm_memremap() error path tools/testing/nvdimm: fix allocation range for mock flush hint tables nvdimm: fix PHYS_PFN/PFN_PHYS mixup
2016-09-29x86/init: Fix cr4_init_shadow() on CR4-less machinesAndy Lutomirski
cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-29MIPS: Fix detection of unsupported highmem with cache aliasesPaul Burton
The paging_init() function contains code which detects that highmem is in use but unsupported due to dcache aliasing. However this code was ineffective because it was being run before the caches are probed, meaning that cpu_has_dc_aliases would always evaluate to false (unless a platform overrides it to a compile-time constant) and the detection of the unsupported case is never triggered. The kernel would then go on to attempt to use highmem & either hit coherency issues or trigger the BUG_ON in flush_kernel_dcache_page(). Fix this by running paging_init() later than cpu_cache_init(), such that the cpu_has_dc_aliases macro will evaluate correctly & the unsupported highmem case will be detected successfully. This then leads to a formerly hidden issue in that mem_init_free_highmem() will attempt to free all highmem pages, even though we're avoiding use of them & don't have valid page structs for them. This leads to an invalid pointer dereference & a TLB exception. Avoid this by skipping the loop in mem_init_free_highmem() if cpu_has_dc_aliases evaluates true. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rabin Vincent <rabinv@axis.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14184/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Malta: Fix IOCU disable switch read for MIPS64Paul Burton
Malta boards used with CPU emulators feature a switch to disable use of an IOCU. Software has to check this switch & ignore any present IOCU if the switch is closed. The read used to do this was unsafe for 64 bit kernels, as it simply casted the address 0xbf403000 to a pointer & dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a 64 bit kernel this attempts to access xuseg & results in an address error exception. Fix by accessing a correctly formed ckseg1 address generated using the CKSEG1ADDR macro. Whilst modifying this code, define the name of the register and the bit we care about within it, which indicates whether PCI DMA is routed to the IOCU or straight to DRAM. The code previously checked that bit 0 was also set, but the least significant 7 bits of the CONFIG_GEN0 register contain the value of the MReqInfo signal provided to the IOCU OCP bus, so singling out bit 0 makes little sense & that part of the check is dropped. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b6d92b4a6bdb ("MIPS: Add option to disable software I/O coherency.") Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPSPaul Burton
When the kernel is built for microMIPS, branches targets need to be known to be microMIPS code in order to result in bit 0 of the PC being set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply the end of the macro, which may be pointing at padding rather than at code. This results in recent enough GNU linkers complaining like so: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes. mips-img-linux-gnu-ld: final link failed: Bad value Makefile:936: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Fix this by changing the branch target to be the start of the appropriate handler, skipping over any padding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: clear execution hazard after changing FTLB enablePaul Burton
On current P-series cores from Imagination the FTLB can be enabled or disabled via a bit in the Config6 register, and an execution hazard is created by changing the value of bit. The ftlb_disable function already cleared that hazard but that does no good for other callers. Clear the hazard in the set_ftlb_enable function that creates it, and only for the cores where it applies. This has the effect of reverting c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") which was incorrect. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: c982c6d6c48b ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Configure FTLB after probing TLB sizes from config4Paul Burton
On some cores (proAptiv, P5600) we make use of the sizes of the TLBs to determine the desired FTLB:VTLB write ratio. However set_ftlb_enable & thus calculate_ftlb_probability is called before decode_config4. This results in us calculating a probability based on zero sizes, and we end up setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio in all cases. This will make abysmal use of the available FTLB resources in the affected cores. Fix this by configuring the FTLB probability after having decoded config4. However we do need to have enabled the FTLB before that point such that fields in config4 actually reflect that an FTLB is present. So set_ftlb_enable is now called twice, with flags indicating that it should configure the write probability only the second time. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: cf0a8aa0226d ("MIPS: cpu-probe: Set the FTLB probability bit on supported cores") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Stop setting I6400 FTLBPPaul Burton
The FTLBP field in Config7 for the I6400 is intended as chicken bits for debugging rather than as a field that software actually makes use of. For best performance, FTLBP should be left at its default value of 0 with all TLB writes hitting the FTLB by default. Additionally, since set_ftlb_enable is called from decode_configs before decode_config4 which determines the size of the TLBs, this was previously always setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio which makes abysmal use of the available FTLB resources. This effectively reverts b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400"). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14021/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: DEC: Avoid la pseudo-instruction in delay slotsRalf Baechle
When expanding the la or dla pseudo-instruction in a delay slot the GNU assembler will complain should the pseudo-instruction expand to multiple actual instructions, since only the first of them will be in the delay slot leading to the pseudo-instruction being only partially executed if the branch is taken. Use of PTR_LA in the dec int-handler.S leads to such warnings: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot Avoid this by open coding the PTR_LA macros. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Octeon: mark GPIO controller node not populated after IRQ init.Steven J. Hill
We clear the OF_POPULATED flag for the GPIO controller node on Octeon processors. Otherwise, none of the devices hanging on the GPIO lines are probed. The 'gpio-leds' driver on OCTEON failed to probe in addition to other devices on Cavium 71xx and 78xx development boards. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: uprobes: fix use of uninitialised variableMarcin Nowakowski
arch_uprobe_pre_xol needs to emulate a branch if a branch instruction has been replaced with a breakpoint, but in fact an uninitialised local variable was passed to the emulator routine instead of the original instruction Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14300/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: uprobes: remove incorrect set_orig_insnMarcin Nowakowski
Generic kernel code implements a weak version of set_orig_insn that moves cached 'insn' from arch_uprobe to the original code location when the trap is removed. MIPS variant used arch_uprobe->orig_inst which was never initialised properly, so this code only inserted a nop instead of the original instruction. With that change orig_inst can also be safely removed. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14299/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: fix uretprobe implementationMarcin Nowakowski
arch_uretprobe_hijack_return_addr should replace the return address for a call with a trampoline address. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14298/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUsMatt Redfearn
Commit 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors") added a call to mips_cm_lock_other in order to lock the CPC in CPUs containing a version 3 or higher Coherence Manager, which use the general CM core other register, where previous CMs had a dedicated core other register for the CPC. A kernel BUG() is triggered, however, if mips_cm_lock_other is called with a VP other than 0 on a CPU with CM < 3, a condition introduced by 0d2808f338c7. Avoid the BUG() by always locking VP0 when locking the CPC, since the required register, cpc_stat_conf, is shared by all vps in a core. Fixes: 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug...) Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14297/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29ARM: 8617/1: dma: fix dma_max_pfn()Roger Quadros
Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-29ARM: 8616/1: dt: Respect property size when parsing CPUsRobin Murphy
Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-28sparc64: Fix non-SMP build.David S. Miller
Need to provide a dummy smp_fill_in_cpu_possible_map. Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mem-hotplug: use nodes that contain memory as mask in new_node_page() scripts/recordmcount.c: account for .softirqentry.text dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUG mm,ksm: fix endless looping in allocating memory when ksm enable
2016-09-28mem-hotplug: use nodes that contain memory as mask in new_node_page()Li Zhong
9bb627be47a5 ("mem-hotplug: don't clear the only node in new_node_page()") prevents allocating from an empty nodemask, but as David points out, it is still wrong. As node_online_map may include memoryless nodes, only allocating from these nodes is meaningless. This patch uses node_states[N_MEMORY] mask to prevent the above case. Fixes: 9bb627be47a5 ("mem-hotplug: don't clear the only node in new_node_page()") Fixes: 394e31d2ceb4 ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline") Link: http://lkml.kernel.org/r/1474447117.28370.6.camel@TP420 Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28scripts/recordmcount.c: account for .softirqentry.textDmitry Vyukov
be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added .softirqentry.text section, but it was not added to recordmcount. So functions in the section are untracable. Add the section to scripts/recordmcount.c and scripts/recordmcount.pl. Fixes: be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") Link: http://lkml.kernel.org/r/1474902626-73468-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Steve Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUGAndrey Smirnov
When CONFIG_DMA_API_DEBUG is enabled we need to preserve unmapping address even if "unmap" is a no-op for our architecutre because we need debug_dma_unmap_page() to correctly cleanup all of the debug bookkeeping. Failing to do so results in a false positive warnings about previously mapped areas never being unmapped. Link: http://lkml.kernel.org/r/1474387125-3713-1-git-send-email-andrew.smirnov@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: "Luis R. Rodriguez" <mcgrof@suse.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Geliang Tang <geliangtang@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28mm,ksm: fix endless looping in allocating memory when ksm enablezhong jiang
I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Suggested-by: Hugh Dickins <hughd@google.com> Suggested-by: Michal Hocko <mhocko@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28Merge tag 'for-linus-20160928' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull late MTD fixes from Brian Norris: "Another round of MTD fixes for v4.8 My apologies for sending this so late. I've been fairly absent as a maintainer this cycle, but I did queue these up weeks ago. In the meantime, Richard was able to handle some other fixes (thanks!) but didn't pick these up. On the bright side, these are very simple changes that should carry little risk. Summary: - Davinci NAND: fix a long-standing bug in how we clear/prep 4-bit ECC - OMAP NAND: an error-handling fix that made it into v4.8-rc1 caused error-handling cases in other configurations/code-paths; this fixes the fix" * tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd: mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl mtd: nand: omap2: Don't call dma_release_channel() if dma_request_chan() failed
2016-09-28MAINTAINERS: Update my e-mailMark Fasheh
I will be starting employment at Versity next week and would like to update my MAINTAINERS e-mail to reflect that change. My versity e-mail is already activated so I shouldn't get any bounces on the new one. My ability to help with Ocfs2 kernel maintenance won't change as a result of the new job. Signed-off-by: Mark Fasheh <mfasheh@versity.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>