AgeCommit message (Collapse)Author
2014-07-29isdn/bas_gigaset: fix a leak on failure path in gigaset_probe()Alexey Khoroshilov
There is a lack of usb_put_dev(udev) on failure path in gigaset_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A nice small set of bug fixes for arm-soc: - two incorrect register addresses in DT files on shmobile and hisilicon - one revert for a regression on omap - one bug fix for a newly introduced pin controller binding - one regression fix for the memory controller on omap - one patch to avoid a harmless WARN_ON" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: Revert enabling of twl configuration for n900 ARM: dts: fix L2 address in Hi3620 ARM: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable() pinctrl: dra: dt-bindings: Fix pull enable/disable ARM: shmobile: r8a7791: Fix SD2CKCR register address ARM: OMAP2+: l2c: squelch warning dump on power control setting
2014-07-29AFS: Correctly assemble the client UUIDDavid Howells
Correctly assemble the client UUID by OR'ing in the flags rather than assigning them over the other components. Reported-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-29mm: fix page_alloc.c kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings and function name in mm/page_alloc.c: Warning(..//mm/page_alloc.c:6074): No description found for parameter 'pfn' Warning(..//mm/page_alloc.c:6074): No description found for parameter 'mask' Warning(..//mm/page_alloc.c:6074): Excess function parameter 'start_bitidx' description in 'get_pfnblock_flags_mask' Warning(..//mm/page_alloc.c:6102): No description found for parameter 'pfn' Warning(..//mm/page_alloc.c:6102): No description found for parameter 'mask' Warning(..//mm/page_alloc.c:6102): Excess function parameter 'start_bitidx' description in 'set_pfnblock_flags_mask' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-29ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layoutKonstantin Khlebnikov
On LPAE, each level 1 (pgd) page table entry maps 1GiB, and the level 2 (pmd) entries map 2MiB. When the identity mapping is created on LPAE, the pgd pointers are copied from the swapper_pg_dir. If we find that we need to modify the contents of a pmd, we allocate a new empty pmd table and insert it into the appropriate 1GB slot, before then filling it with the identity mapping. However, if the 1GB slot covers the kernel lowmem mappings, we obliterate those mappings. When replacing a PMD, first copy the old PMD contents to the new PMD, so that we preserve the existing mappings, particularly the mappings of the kernel itself. [rewrote commit message and added code comment -- rmk] Fixes: ae2de101739c ("ARM: LPAE: Add identity mapping support for the 3-level page table format") Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-29Merge tag 'omap-for-v3.16/n900-regression' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap n900 regression fix for v3.16 rc series" from Tony Lindgren: Minimal regression fix for n900 display that got broken with enabling of twl4030 PM features. Turns out more work is needed before we can enable twl4030 PM on n900. I did not notice this earlier as I have my n900 in a rack and the display did not get enabled for device tree based booting until for v3.16. * tag 'omap-for-v3.16/n900-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Revert enabling of twl configuration for n900 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-29ARM: fix alignment of keystone page table fixupRussell King
If init_mm.brk is not section aligned, the LPAE fixup code will miss updating the final PMD. Fix this by aligning map_end. Fixes: a77e0c7b2774 ("ARM: mm: Recreate kernel mappings in early_paging_init()") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-29ARM: dts: Revert enabling of twl configuration for n900Tony Lindgren
Commit 9188883fd66e9 (ARM: dts: Enable twl4030 off-idle configuration for selected omaps) allowed n900 to cut off core voltages during off-idle. This however caused a regression where twl regulator vaux1 was not getting enabled for the LCD panel as we are not requesting it for the panel. Turns out quite a few devices on n900 are using vaux1, and we need to either stop idling it, or add proper regulator_get calls for all users. But until we have a proper solution implemented and tested, let's just disable the twl off-idle configuration for now for n900. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 9188883fd66e9 (ARM: dts: Enable twl4030 off-idle configuration for selected omaps) Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-28ip: make IP identifiers less predictableEric Dumazet
In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28neighbour : fix ndm_type type error issueJun Zhao
ndm_type means L3 address type, in neighbour proxy and vxlan, it's RTN_UNICAST. NDA_DST is for netlink TLV type, hence it's not right value in this context. Signed-off-by: Jun Zhao <mypopydev@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28sunvnet: only use connected ports when sendingDavid L Stevens
The sunvnet driver doesn't check whether or not a port is connected when transmitting packets, which results in failures if a port fails to connect (e.g., due to a version mismatch). The original code also assumes unnecessarily that the first port is up and a switch, even though there is a flag for switch ports. This patch only matches a port if it is connected, and otherwise uses the switch_port flag to send the packet to a switch port that is up. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28Merge tag 'linux-can-fixes-for-3.16-20140725' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-07-25 this is a pull request of one patch for the net tree, hoping to get into the 3.16 release. The patch by George Cherian fixes a regression in the c_can platform driver. When using two interfaces the regression leads to a non function second interface. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28x86_64/entry/xen: Do not invoke espfix64 on XenAndy Lutomirski
This moves the espfix64 logic into native_iret. To make this work, it gets rid of the native patch for INTERRUPT_RETURN: INTERRUPT_RETURN on native kernels is now 'jmp native_iret'. This changes the 16-bit SS behavior on Xen from OOPSing to leaking some bits of the Xen hypervisor's RSP (I think). [ hpa: this is a nonzero cost on native, but probably not enough to measure. Xen needs to fix this in their own code, probably doing something equivalent to espfix64. ] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2014-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull ARM AES crypto fixes from Herbert Xu: "This push fixes a regression on ARM where odd-sized blocks supplied to AES may cause crashes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm-aes - fix encryption of unaligned data crypto: arm64-aes - fix encryption of unaligned data
2014-07-28Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are 3 more small powerpc fixes that should still go into .16. One is a recent regression (MMCR2 business), the other is a trivial endian fix without which FW updates won't work on LE in IBM machines, and the 3rd one turns a BUG_ON into a WARN_ON which is definitely a LOT more friendly especially when the whole thing is about retrieving error logs ..." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix endianness of flash_block_list in rtas_flash powerpc/powernv: Change BUG_ON to WARN_ON in elog code powerpc/perf: Fix MMCR2 handling for EBB
2014-07-28crypto: arm-aes - fix encryption of unaligned dataMikulas Patocka
Fix the same alignment bug as in arm64 - we need to pass residue unprocessed bytes as the last argument to blkcipher_walk_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # 3.13+ Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-28crypto: arm64-aes - fix encryption of unaligned dataMikulas Patocka
cryptsetup fails on arm64 when using kernel encryption via AF_ALG socket. See https://bugzilla.redhat.com/show_bug.cgi?id=1122937 The bug is caused by incorrect handling of unaligned data in arch/arm64/crypto/aes-glue.c. Cryptsetup creates a buffer that is aligned on 8 bytes, but not on 16 bytes. It opens AF_ALG socket and uses the socket to encrypt data in the buffer. The arm64 crypto accelerator causes data corruption or crashes in the scatterwalk_pagedone. This patch fixes the bug by passing the residue bytes that were not processed as the last parameter to blkcipher_walk_done. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-28powerpc: Fix endianness of flash_block_list in rtas_flashThomas Falcon
The function rtas_flash_firmware passes the address of a data structure, flash_block_list, when making the update-flash-64-and-reboot rtas call. While the endianness of the address is handled correctly, the endianness of the data is not. This patch ensures that the data in flash_block_list is big endian when passed to rtas on little endian hosts. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc/powernv: Change BUG_ON to WARN_ON in elog codeVasant Hegde
We can continue to read the error log (up to MAX size) even if we get the elog size more than MAX size. Hence change BUG_ON to WARN_ON. Also updated error message. Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-27Linux 3.16-rc7v3.16-rc7Linus Torvalds
2014-07-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A bunch of fixes for perf and kprobes: - revert a commit that caused a perf group regression - silence dmesg spam - fix kprobe probing errors on ia64 and ppc64 - filter kprobe faults from userspace - lockdep fix for perf exit path - prevent perf #GP in KVM guest - correct perf event and filters" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64 kprobes/x86: Don't try to resolve kprobe faults from userspace perf/x86/intel: Avoid spamming kernel log for BTS buffer failure perf/x86/intel: Protect LBR and extra_regs against KVM lying perf: Fix lockdep warning on process exit perf/x86/intel/uncore: Fix SNB-EP/IVT Cbox filter mappings perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge perf: Revert ("perf: Always destroy groups on exit")
2014-07-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of crash fixes, plus a fix that on 32 bits would cause a missing -ENOSYS for nonexistent system calls" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu: Fix cache topology for early P4-SMT x86_32, entry: Store badsys error code in %eax x86, MCE: Robustify mcheck_init_device
2014-07-27Merge branch 'vfs-for-3.16' of git://git.infradead.org/users/hch/vfsLinus Torvalds
Pull vfs fixes from Christoph Hellwig: "A vfsmount leak fix, and a compile warning fix" * 'vfs-for-3.16' of git://git.infradead.org/users/hch/vfs: fs: umount on symlink leaks mnt count direct-io: fix uninitialized warning in do_direct_IO()
2014-07-27Merge tag 'firewire-fix-vt6315' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire regression fix from Stefan Richter: "IEEE 1394 (FireWire) subsystem fix: MSI don't work on VIA PCIe controllers with some isochronous workloads (regression since v3.16-rc1)" * tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: disable MSI for VIA VT6315 again
2014-07-26Fix gcc-4.9.0 miscompilation of load_balance() in schedulerLinus Torvalds
Michel Dänzer and a couple of other people reported inexplicable random oopses in the scheduler, and the cause turns out to be gcc mis-compiling the load_balance() function when debugging is enabled. The gcc bug apparently goes back to gcc-4.5, but slight optimization changes means that it now showed up as a problem in 4.9.0 and 4.9.1. The instruction scheduling problem causes gcc to schedule a spill operation to before the stack frame has been created, which in turn can corrupt the spilled value if an interrupt comes in. There may be other effects of this bug too, but that's the code generation problem seen in Michel's case. This is fixed in current gcc HEAD, but the workaround as suggested by Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments when compiling the kernel, which disables the gcc code that causes the problem. This can result in slightly worse debug information for variable accesses, but that is infinitely preferable to actual code generation problems. Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows non-debug builds to verify that the debug build would be identical: we can do export GCC_COMPARE_DEBUG=1 to make gcc internally verify that the result of the build is independent of the "-g" flag (it will make the compiler build everything twice, toggling the debug flag, and compare the results). Without the "-fno-var-tracking-assignments" option, the build would fail (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc compare failure. See also gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801 Reported-by: Michel Dänzer <michel@daenzer.net> Suggested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jakub Jelinek <jakub@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-26mm: fix direct reclaim writeback regressionHugh Dickins
Shortly before 3.16-rc1, Dave Jones reported: WARNING: CPU: 3 PID: 19721 at fs/xfs/xfs_aops.c:971 xfs_vm_writepage+0x5ce/0x630 [xfs]() CPU: 3 PID: 19721 Comm: trinity-c61 Not tainted 3.15.0+ #3 Call Trace: xfs_vm_writepage+0x5ce/0x630 [xfs] shrink_page_list+0x8f9/0xb90 shrink_inactive_list+0x253/0x510 shrink_lruvec+0x563/0x6c0 shrink_zone+0x3b/0x100 shrink_zones+0x1f1/0x3c0 try_to_free_pages+0x164/0x380 __alloc_pages_nodemask+0x822/0xc90 alloc_pages_vma+0xaf/0x1c0 handle_mm_fault+0xa31/0xc50 etc. 970 if (WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) == 971 PF_MEMALLOC)) I did not respond at the time, because a glance at the PageDirty block in shrink_page_list() quickly shows that this is impossible: we don't do writeback on file pages (other than tmpfs) from direct reclaim nowadays. Dave was hallucinating, but it would have been disrespectful to say so. However, my own /var/log/messages now shows similar complaints WARNING: CPU: 1 PID: 28814 at fs/ext4/inode.c:1881 ext4_writepage+0xa7/0x38b() WARNING: CPU: 0 PID: 27347 at fs/ext4/inode.c:1764 ext4_writepage+0xa7/0x38b() from stressing some mmotm trees during July. Could a dirty xfs or ext4 file page somehow get marked PageSwapBacked, so fail shrink_page_list()'s page_is_file_cache() test, and so proceed to mapping->a_ops->writepage()? Yes, 3.16-rc1's commit 68711a746345 ("mm, migration: add destination page freeing callback") has provided such a way to compaction: if migrating a SwapBacked page fails, its newpage may be put back on the list for later use with PageSwapBacked still set, and nothing will clear it. Whether that can do anything worse than issue WARN_ON_ONCEs, and get some statistics wrong, is unclear: easier to fix than to think through the consequences. Fixing it here, before the put_new_page(), addresses the bug directly, but is probably the worst place to fix it. Page migration is doing too many parts of the job on too many levels: fixing it in move_to_new_page() to complement its SetPageSwapBacked would be preferable, except why is it (and newpage->mapping and newpage->index) done there, rather than down in migrate_page_move_mapping(), once we are sure of success? Not a cleanup to get into right now, especially not with memcg cleanups coming in 3.17. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-26ARM: dts: fix L2 address in Hi3620Haojian Zhuang
Fix the address of L2 controler register in hi3620 SoC. This has been wrong from the point that the file was merged in v3.14. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-25Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "This is radeon and intel fixes, and is a small bit larger than I'm guessing you'd like it to be. - i915: fixes 32-bit highmem i915 blank screen, semaphore hang and runtime pm fix - radeon: gpuvm stability fix for hangs since 3.15, and hang/reboot regression on TN/RL devices, The only slightly controversial one is the change to use GB for the vm_size, which I'm letting through as its a new interface we defined in this merge window, and I'd prefer to have the released kernel have the final interface rather than changing it later" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix cut and paste issue for hawaii. drm/radeon: fix irq ring buffer overflow handling drm/i915: Simplify i915_gem_release_all_mmaps() drm/radeon: fix error handling in radeon_vm_bo_set_addr drm/i915: fix freeze with blank screen booting highmem drm/i915: Reorder the semaphore deadlock check, again drm/radeon/TN: only enable bapm on MSI systems drm/radeon: fix VM IB handling drm/radeon: fix handling of radeon_vm_bo_rmv v3 drm/radeon: let's use GB for vm_size (v2)
2014-07-25Merge tag 'sound-3.16-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here contains only the fixes for the new FireWire bebob driver. All fairly trivial and local fixes, so safe to apply" * tag 'sound-3.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: bebob: Correction for return value of special_clk_ctl_put() in error ALSA: bebob: Correction for return value of .put callback ALSA: bebob: Use different labels for digital input/output ALSA: bebob: Fix a missing to unlock mutex in error handling case
2014-07-25Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fixes to temperature limit and vrm write operations in smsc47m192 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (smsc47m192) Fix temperature limit and vrm write operations
2014-07-25parport: fix menu breakageRandy Dunlap
Do not split the PARPORT-related symbols with the new kconfig symbol ARCH_MIGHT_HAVE_PC_PARPORT. The split was causing incorrect display of these symbols -- they were not being displayed together as they should be. Fixes: d90c3eb31535 "Kconfig cleanup (PARPORT_PC dependencies)" Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mark Salter <msalter@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org # for 3.13, 3.14, 3.15 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-25Merge tag 'blackfin-3.16-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin fixes from Steven Miao: "smc nor flash PM fix, pinctrl group fix, update defconfig, and build fixes" * tag 'blackfin-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section for XIP kernel defconfig: BF609: update spi config name irq: blackfin sec: drop duplicated sec priority set blackfin: bind different groups of one pinmux function to different state name blackfin: fix some bf5xx boards build for missing <linux/gpio.h> pm: bf609: cleanup smc nor flash
2014-07-26blackfin: vmlinux.lds.S: reserve 32 bytes space at the end of data section ↵Steven Miao
for XIP kernel to collect some undefined section to the end of the data section and avoid section overlap Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26defconfig: BF609: update spi config nameSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26irq: blackfin sec: drop duplicated sec priority setSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26blackfin: bind different groups of one pinmux function to different state nameSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26blackfin: fix some bf5xx boards build for missing <linux/gpio.h>Steven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-26pm: bf609: cleanup smc nor flashSteven Miao
drop smc pin state change code, pin state will be saved in pinctrl-adi2 driver cleanup nor flash init/exit for pm suspend/resume Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-07-25Merge branch 'parisc-3.16-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "We have two trivial patches in here. One removes the SA_RESTORER #define since on parisc we don't have the sa_restorer field in struct sigaction, the other patch removes an unnecessary memset(). The SA_RESTORER removal patch is scheduled for stable trees, since without it some userspace apps don't build" * 'parisc-3.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Eliminate memset after alloc_bootmem_pages parisc: Remove SA_RESTORER define
2014-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "These two pathes fix issues with the kernel-userspace protocol changes in v3.15" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add FUSE_NO_OPEN_SUPPORT flag to INIT fuse: s_time_gran fix
2014-07-25can: c_can_platform: Fix raminit, use devm_ioremap() instead of ↵George Cherian
devm_ioremap_resource() The raminit register is shared register for both can0 and can1. Since commit: 32766ff net: can: Convert to use devm_ioremap_resource devm_ioremap_resource() is used to map raminit register. When using both interfaces the mapping for the can1 interface fails, leading to a non functional can interface. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-07-24bnx2x: fix crash during TSO tunnelingDmitry Kravkov
When TSO packet is transmitted additional BD w/o mapping is used to describe the packed. The BD needs special handling in tx completion. kernel: Call Trace: kernel: <IRQ> [<ffffffff815e19ba>] dump_stack+0x19/0x1b kernel: [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80 kernel: [<ffffffff8105df5c>] warn_slowpath_fmt+0x5c/0x80 kernel: [<ffffffff814a8c0d>] ? find_iova+0x4d/0x90 kernel: [<ffffffff814ab0e2>] intel_unmap_page.part.36+0x142/0x160 kernel: [<ffffffff814ad0e6>] intel_unmap_page+0x26/0x30 kernel: [<ffffffffa01f55d7>] bnx2x_free_tx_pkt+0x157/0x2b0 [bnx2x] kernel: [<ffffffffa01f8dac>] bnx2x_tx_int+0xac/0x220 [bnx2x] kernel: [<ffffffff8101a0d9>] ? read_tsc+0x9/0x20 kernel: [<ffffffffa01f8fdb>] bnx2x_poll+0xbb/0x3c0 [bnx2x] kernel: [<ffffffff814d041a>] net_rx_action+0x15a/0x250 kernel: [<ffffffff81067047>] __do_softirq+0xf7/0x290 kernel: [<ffffffff815f3a5c>] call_softirq+0x1c/0x30 kernel: [<ffffffff81014d25>] do_softirq+0x55/0x90 kernel: [<ffffffff810673e5>] irq_exit+0x115/0x120 kernel: [<ffffffff815f4358>] do_IRQ+0x58/0xf0 kernel: [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d kernel: <EOI> [<ffffffff810bbff7>] ? clockevents_notify+0x127/0x140 kernel: [<ffffffff814834df>] ? cpuidle_enter_state+0x4f/0xc0 kernel: [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200 kernel: [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30 kernel: [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290 kernel: [<ffffffff815cfee1>] start_secondary+0x265/0x27b kernel: ---[ end trace 11aa7726f18d7e80 ]--- Fixes: a848ade408b ("bnx2x: add CSUM and TSO support for encapsulation protocols") Reported-by: Yulong Pei <ypei@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24r8152: fix the checking of the usb speedhayeswang
When the usb speed of the RTL8152 is not high speed, the USB_DEV_STAT[2:1] should be equal to [0 1]. That is, the STAT_SPEED_FULL should be equal to 2. There is a easy way to check the usb speed by the speed field of the struct usb_device. Use it to replace the original metheod. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Spotted-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24Merge tag 'master-2014-07-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-07-24 Please pull this batch of fixes intended for the 3.16 stream... For the mac80211 fixes, Johannes says: "I have two fixes: one for tracing that fixes a long-standing NULL pointer dereference, and one for a mac80211 issue that causes iwlmvm to send invalid frames during authentication/association." and, "One more fix - for a bug in the newly introduced code that obtains rate control information for stations." For the iwlwifi fixes, Emmanuel says: "It includes a merge damage fix. This region has been changed in -next and -fixes quite a few times and apparently, I failed to handle it properly, so here the fix. Along with that I have a fix from Eliad to properly handle overlapping BSS in AP mode." On top of that, Felix provides and ath9k fix for Tx stalls that happen after an aggregation session failure. Please let me know if there are problems! There are some changes here that will cause merge conflicts in -next. Once you merge this I can pull it into wireless-next and resolve those issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24Merge branch 'mdio_module_unload'David S. Miller
Ezequiel Garcia says: ==================== net: phy: Prevent an MDIO bus from being unloaded while in use Changes from v1: * Dropped the unneeded module_put() on phy_attach_direct(). The motivation of this small series is to fix the current lack of relationship between an ethernet driver and the MDIO bus behind the PHY device. In such cases, we would find no visible link between the drivers: $ lsmod Module Size Used by Not tainted mvmdio 2941 0 mvneta 22069 0 Which means nothing prevents the MDIO driver from being removed: $ modprobe -r mvmdio # Unable to handle kernel NULL pointer dereference at virtual address 00000060 pgd = c0004000 [00000060] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: mvneta [last unloaded: mvmdio] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 3.16.0-rc5-01127-g62c0816-dirty #608 Workqueue: events_power_efficient phy_state_machine task: df5ec840 ti: df67a000 task.ti: df67a000 PC is at phy_state_machine+0x1c/0x468 LR is at phy_state_machine+0x18/0x468 [snip] This patchset fixes this problem by adding a pair of module_{get,put}, so the module reference count is increased when the PHY device is attached and is decreased when the PHY is detached. Tested with mvneta and mv643xx_eth drivers, which depend on the mvmdio driver to handle MDIO. This series applies on both net and net-next branches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net: phy: Ensure the MDIO bus module is heldEzequiel Garcia
This commit adds proper module_{get,put} to prevent the MDIO bus module from being unloaded while the phydev is connected. By doing so, we fix a kernel panic produced when a MDIO driver is removed, but the phydev that relies on it is attached and running. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net: phy: Set the driver when registering an MDIO bus deviceEzequiel Garcia
mdiobus_register() registers a device which is already bound to a driver. Hence, the driver pointer should be set properly in order to track down the driver associated to the MDIO bus. This will be used to allow ethernet driver to pin down a MDIO bus driver, preventing it from being unloaded while the PHY device is running. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24bnx2x: fix set_setting for some PHYsYaniv Rosner
Allow set_settings() to complete succesfully even if link is not estabilished and port type isn't known yet. Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Via Simon Horman, I received the following one-liner for your net tree: 1) Fix crash when exiting from netns that uses IPVS and conntrack, from Julian Anastasov via Simon Horman. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24x86: Merge tag 'ras_urgent' into x86/urgentH. Peter Anvin
Promote one fix for 3.16 This fix was necessary after 9c15a24b038f ("x86/mce: Improve mcheck_init_device() error handling") went in. What this patch did was, among others, check the return value of misc_register and exit early if it encountered an error. Original code sloppily didn't do that. However, cef12ee52b05 ("xen/mce: Add mcelog support for Xen platform") made it so that xen's init routine xen_late_init_mcelog runs first. This was needed for the xen mcelog device which is supposed to be independent from the baremetal one. Initially it was reported that misc_register() fails often on xen and that's why it needed fixing. However, it is *supposed* to fail by design, when running in dom0 so that the xen mcelog device file gets registered first. And *then* you need the notifier *not* unregistered on the error path so that the timer does get deleted properly in the CPU hotplug notifier. Btw, this fix is needed also on baremetal in the unlikely event that misc_register(&mce_chrdev_device) fails there too. I was unsure whether to rush it in now and decided to delay it to 3.17. However, xen people wanted it promoted as it breaks xen when doing cpu hotplug there. So, after a bit of simmering in tip/master for initial smoke testing, let's move it to 3.16. It fixes a semi-regression which got introduced in 3.16 so no need for stable tagging. tip/x86/ras contains that exact same commit but we can't remove it there as it is not the last one. It won't cause any merge issues, as I confirmed locally but I should state here the special situation of this one fix explicitly anyway. Thanks. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>