aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_core.c23
-rw-r--r--drivers/tty/serial/amba-pl011.c37
2 files changed, 36 insertions, 24 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b5def356af63..1aab3010fbfa 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1043,13 +1043,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->dl_write)
uart->dl_write = up->dl_write;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
+ if (uart->port.type != PORT_8250_CIR) {
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg,
+ &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ } else {
+ dev_info(uart->port.dev,
+ "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
+ uart->port.iobase,
+ (unsigned long long)uart->port.mapbase,
+ uart->port.irq);
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
+ ret = 0;
+ }
}
mutex_unlock(&serial_mutex);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8a857bb34fbb..1888d168a41c 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -142,15 +142,7 @@ static struct vendor_data vendor_sbsa = {
.fixed_options = true,
};
-/*
- * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
- * occasionally getting stuck as 1. To avoid the potential for a hang, check
- * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
- * implementations, so only do so if an affected platform is detected in
- * parse_spcr().
- */
-static bool qdf2400_e44_present = false;
-
+#ifdef CONFIG_ACPI_SPCR_TABLE
static struct vendor_data vendor_qdt_qdf2400_e44 = {
.reg_offset = pl011_std_offsets,
.fr_busy = UART011_FR_TXFE,
@@ -165,6 +157,7 @@ static struct vendor_data vendor_qdt_qdf2400_e44 = {
.always_enabled = true,
.fixed_options = true,
};
+#endif
static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
[REG_DR] = UART01x_DR,
@@ -2375,12 +2368,14 @@ static int __init pl011_console_match(struct console *co, char *name, int idx,
resource_size_t addr;
int i;
- if (strcmp(name, "qdf2400_e44") == 0) {
- pr_info_once("UART: Working around QDF2400 SoC erratum 44");
- qdf2400_e44_present = true;
- } else if (strcmp(name, "pl011") != 0) {
+ /*
+ * Systems affected by the Qualcomm Technologies QDF2400 E44 erratum
+ * have a distinct console name, so make sure we check for that.
+ * The actual implementation of the erratum occurs in the probe
+ * function.
+ */
+ if ((strcmp(name, "qdf2400_e44") != 0) && (strcmp(name, "pl011") != 0))
return -ENODEV;
- }
if (uart_parse_earlycon(options, &iotype, &addr, &options))
return -ENODEV;
@@ -2734,11 +2729,17 @@ static int sbsa_uart_probe(struct platform_device *pdev)
}
uap->port.irq = ret;
- uap->reg_offset = vendor_sbsa.reg_offset;
- uap->vendor = qdf2400_e44_present ?
- &vendor_qdt_qdf2400_e44 : &vendor_sbsa;
+#ifdef CONFIG_ACPI_SPCR_TABLE
+ if (qdf2400_e44_present) {
+ dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n");
+ uap->vendor = &vendor_qdt_qdf2400_e44;
+ } else
+#endif
+ uap->vendor = &vendor_sbsa;
+
+ uap->reg_offset = uap->vendor->reg_offset;
uap->fifosize = 32;
- uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
+ uap->port.iotype = uap->vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.ops = &sbsa_uart_pops;
uap->fixed_baud = baudrate;