aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/include/asm/barrier.h2
-rw-r--r--arch/alpha/include/asm/futex.h118
-rw-r--r--arch/alpha/include/asm/uaccess.h2
-rw-r--r--arch/alpha/kernel/Makefile6
-rw-r--r--arch/alpha/kernel/binfmt_loader.c2
-rw-r--r--arch/alpha/kernel/err_ev6.c2
-rw-r--r--arch/alpha/kernel/err_ev7.c4
-rw-r--r--arch/alpha/kernel/err_impl.h10
-rw-r--r--arch/alpha/kernel/err_marvel.c2
-rw-r--r--arch/alpha/kernel/err_titan.c4
-rw-r--r--arch/alpha/kernel/proto.h5
-rw-r--r--arch/alpha/mm/extable.c40
-rw-r--r--arch/arm/Kconfig61
-rw-r--r--arch/arm/configs/davinci_all_defconfig1784
-rw-r--r--arch/arm/configs/kirkwood_defconfig92
-rw-r--r--arch/arm/configs/mv78xx0_defconfig429
-rw-r--r--arch/arm/configs/mx31moboard_defconfig790
-rw-r--r--arch/arm/configs/mx3_defconfig2
-rw-r--r--arch/arm/configs/orion5x_defconfig363
-rw-r--r--arch/arm/configs/viper_defconfig1
-rw-r--r--arch/arm/include/asm/elf.h16
-rw-r--r--arch/arm/kernel/module.c15
-rw-r--r--arch/arm/mach-davinci/Kconfig47
-rw-r--r--arch/arm/mach-davinci/Makefile9
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c (renamed from arch/arm/mach-davinci/board-evm.c)318
-rw-r--r--arch/arm/mach-davinci/clock.c385
-rw-r--r--arch/arm/mach-davinci/clock.h87
-rw-r--r--arch/arm/mach-davinci/devices.c7
-rw-r--r--arch/arm/mach-davinci/dm644x.c461
-rw-r--r--arch/arm/mach-davinci/dma.c1135
-rw-r--r--arch/arm/mach-davinci/gpio.c82
-rw-r--r--arch/arm/mach-davinci/id.c35
-rw-r--r--arch/arm/mach-davinci/include/mach/board-dm6446evm.h20
-rw-r--r--arch/arm/mach-davinci/include/mach/clkdev.h13
-rw-r--r--arch/arm/mach-davinci/include/mach/clock.h1
-rw-r--r--arch/arm/mach-davinci/include/mach/common.h6
-rw-r--r--arch/arm/mach-davinci/include/mach/cputype.h49
-rw-r--r--arch/arm/mach-davinci/include/mach/dm644x.h37
-rw-r--r--arch/arm/mach-davinci/include/mach/edma.h228
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h27
-rw-r--r--arch/arm/mach-davinci/include/mach/hardware.h51
-rw-r--r--arch/arm/mach-davinci/include/mach/io.h20
-rw-r--r--arch/arm/mach-davinci/include/mach/irqs.h103
-rw-r--r--arch/arm/mach-davinci/include/mach/mux.h220
-rw-r--r--arch/arm/mach-davinci/include/mach/psc.h53
-rw-r--r--arch/arm/mach-davinci/include/mach/serial.h21
-rw-r--r--arch/arm/mach-davinci/io.c23
-rw-r--r--arch/arm/mach-davinci/irq.c156
-rw-r--r--arch/arm/mach-davinci/mux.c100
-rw-r--r--arch/arm/mach-davinci/mux.h51
-rw-r--r--arch/arm/mach-davinci/psc.c98
-rw-r--r--arch/arm/mach-davinci/serial.c95
-rw-r--r--arch/arm/mach-davinci/time.c103
-rw-r--r--arch/arm/mach-davinci/usb.c2
-rw-r--r--arch/arm/mach-omap1/board-h2-mmc.c14
-rw-r--r--arch/arm/mach-omap1/board-h3-mmc.c6
-rw-r--r--arch/arm/mach-omap1/board-h3.c101
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c6
-rw-r--r--arch/arm/mach-omap1/mcbsp.c4
-rw-r--r--arch/arm/mach-omap2/board-h4.c95
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c4
-rw-r--r--arch/arm/mach-omap2/board-rx51.c1
-rw-r--r--arch/arm/mach-omap2/clock24xx.c19
-rw-r--r--arch/arm/mach-omap2/clock24xx.h10
-rw-r--r--arch/arm/mach-omap2/clock34xx.h7
-rw-r--r--arch/arm/mach-omap2/devices.c33
-rw-r--r--arch/arm/mach-omap2/irq.c4
-rw-r--r--arch/arm/mach-omap2/timer-gp.c48
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c2
-rw-r--r--arch/arm/mach-pxa/Kconfig4
-rw-r--r--arch/arm/mach-pxa/corgi.c10
-rw-r--r--arch/arm/mach-pxa/littleton.c9
-rw-r--r--arch/arm/mach-pxa/spitz.c10
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c5
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c1
-rw-r--r--arch/arm/mach-s3c2412/pm.c3
-rw-r--r--arch/arm/mach-s3c6400/include/mach/map.h2
-rw-r--r--arch/arm/mach-sa1100/lart.c1
-rw-r--r--arch/arm/mm/cache-v6.S33
-rw-r--r--arch/arm/mm/flush.c23
-rw-r--r--arch/arm/mm/proc-v7.S19
-rw-r--r--arch/arm/plat-mxc/dma-mx1-mx2.c17
-rw-r--r--arch/arm/plat-mxc/gpio.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27ads.h2
-rw-r--r--arch/arm/plat-omap/clock.c7
-rw-r--r--arch/arm/plat-omap/dma.c13
-rw-r--r--arch/arm/plat-omap/dmtimer.c28
-rw-r--r--arch/arm/plat-omap/gpio.c20
-rw-r--r--arch/arm/plat-omap/include/mach/dmtimer.h2
-rw-r--r--arch/arm/plat-omap/include/mach/eac.h100
-rw-r--r--arch/arm/plat-omap/include/mach/gpioexpander.h35
-rw-r--r--arch/arm/plat-omap/include/mach/irda.h4
-rw-r--r--arch/arm/plat-omap/include/mach/mmc.h1
-rw-r--r--arch/arm/plat-omap/include/mach/timer-gp.h17
-rw-r--r--arch/arm/plat-pxa/gpio.c23
-rw-r--r--arch/avr32/Makefile2
-rw-r--r--arch/ia64/include/asm/idle.h7
-rw-r--r--arch/ia64/include/asm/xen/events.h7
-rw-r--r--arch/ia64/xen/xensetup.S2
-rw-r--r--arch/m32r/boot/compressed/Makefile1
-rw-r--r--arch/m32r/include/asm/assembler.h7
-rw-r--r--arch/m32r/kernel/Makefile2
-rw-r--r--arch/microblaze/include/asm/of_platform.h10
-rw-r--r--arch/powerpc/Kconfig4
-rw-r--r--arch/powerpc/boot/Makefile67
-rw-r--r--arch/powerpc/boot/dtc-src/Makefile.dtc9
-rw-r--r--arch/powerpc/boot/dtc-src/checks.c587
-rw-r--r--arch/powerpc/boot/dtc-src/data.c321
-rw-r--r--arch/powerpc/boot/dtc-src/dtc-lexer.l320
-rw-r--r--arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped2187
-rw-r--r--arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped2040
-rw-r--r--arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped113
-rw-r--r--arch/powerpc/boot/dtc-src/dtc-parser.y379
-rw-r--r--arch/powerpc/boot/dtc-src/dtc.c226
-rw-r--r--arch/powerpc/boot/dtc-src/dtc.h246
-rw-r--r--arch/powerpc/boot/dtc-src/flattree.c906
-rw-r--r--arch/powerpc/boot/dtc-src/fstree.c92
-rw-r--r--arch/powerpc/boot/dtc-src/libfdt_env.h23
-rw-r--r--arch/powerpc/boot/dtc-src/livetree.c308
-rw-r--r--arch/powerpc/boot/dtc-src/srcpos.c116
-rw-r--r--arch/powerpc/boot/dtc-src/srcpos.h85
-rw-r--r--arch/powerpc/boot/dtc-src/treesource.c278
-rw-r--r--arch/powerpc/boot/dtc-src/version_gen.h1
-rw-r--r--arch/powerpc/boot/libfdt/Makefile.libfdt8
-rw-r--r--arch/powerpc/boot/libfdt/fdt.c201
-rw-r--r--arch/powerpc/boot/libfdt/fdt.h60
-rw-r--r--arch/powerpc/boot/libfdt/fdt_ro.c469
-rw-r--r--arch/powerpc/boot/libfdt/fdt_rw.c463
-rw-r--r--arch/powerpc/boot/libfdt/fdt_strerror.c96
-rw-r--r--arch/powerpc/boot/libfdt/fdt_sw.c257
-rw-r--r--arch/powerpc/boot/libfdt/fdt_wip.c145
-rw-r--r--arch/powerpc/boot/libfdt/libfdt.h1076
-rw-r--r--arch/powerpc/boot/libfdt/libfdt_internal.h95
-rw-r--r--arch/powerpc/boot/simpleboot.c2
-rw-r--r--arch/powerpc/include/asm/of_platform.h10
-rw-r--r--arch/powerpc/kernel/cputable.c15
-rw-r--r--arch/x86/include/asm/mce.h1
-rw-r--r--arch/x86/kernel/amd_iommu_init.c16
-rw-r--r--arch/x86/kernel/cpu/common.c2
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_64.c33
-rw-r--r--arch/x86/kernel/cpu/proc.c2
-rw-r--r--arch/x86/mm/kmmio.c2
-rw-r--r--arch/x86/vdso/vclock_gettime.c12
143 files changed, 6621 insertions, 13228 deletions
diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
index ac78eba909bc..ce8860a0b32d 100644
--- a/arch/alpha/include/asm/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
@@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
+#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
+#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
index 6a332a9f099c..945de222ab91 100644
--- a/arch/alpha/include/asm/futex.h
+++ b/arch/alpha/include/asm/futex.h
@@ -1,6 +1,116 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ __ASM_SMP_MB \
+ "1: ldl_l %0,0(%2)\n" \
+ insn \
+ "2: stl_c %1,0(%2)\n" \
+ " beq %1,4f\n" \
+ " mov $31,%1\n" \
+ "3: .subsection 2\n" \
+ "4: br 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .long 1b-.\n" \
+ " lda $31,3b-1b(%1)\n" \
+ " .long 2b-.\n" \
+ " lda $31,3b-2b(%1)\n" \
+ " .previous\n" \
+ : "=&r" (oldval), "=&r"(ret) \
+ : "r" (uaddr), "r"(oparg) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int prev, cmp;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ __ASM_SMP_MB
+ "1: ldl_l %0,0(%2)\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,3f\n"
+ " mov %4,%1\n"
+ "2: stl_c %1,0(%2)\n"
+ " beq %1,4f\n"
+ "3: .subsection 2\n"
+ "4: br 1b\n"
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .long 1b-.\n"
+ " lda $31,3b-1b(%0)\n"
+ " .long 2b-.\n"
+ " lda $31,3b-2b(%0)\n"
+ " .previous\n"
+ : "=&r"(prev), "=&r"(cmp)
+ : "r"(uaddr), "r"((long)oldval), "r"(newval)
+ : "memory");
+
+ return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 163f3053001c..b49ec2f8d6e3 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -507,5 +507,7 @@ struct exception_table_entry
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index a427538252f8..7739a62440a7 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
- alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+ alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
@@ -43,6 +43,10 @@ else
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
+ifdef CONFIG_BINFMT_AOUT
+obj-y += binfmt_loader.o
+endif
+
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
index 4a0af906b00a..3fcfad410130 100644
--- a/arch/alpha/kernel/binfmt_loader.c
+++ b/arch/alpha/kernel/binfmt_loader.c
@@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
static int __init init_loader_binfmt(void)
{
- return register_binfmt(&loader_format);
+ return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);
diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c
index 985e5c1681ac..8ca6345bf131 100644
--- a/arch/alpha/kernel/err_ev6.c
+++ b/arch/alpha/kernel/err_ev6.c
@@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
}
void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c
index 73770c6ca013..d738a67112d4 100644
--- a/arch/alpha/kernel/err_ev7.c
+++ b/arch/alpha/kernel/err_ev7.c
@@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
}
void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
@@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
- printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+ printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);
diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h
index 3c12258158e6..0c010ca4611e 100644
--- a/arch/alpha/kernel/err_impl.h
+++ b/arch/alpha/kernel/err_impl.h
@@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
index 6bfd243efba3..52a79dfc13c6 100644
--- a/arch/alpha/kernel/err_marvel.c
+++ b/arch/alpha/kernel/err_marvel.c
@@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
}
void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index c7e28a88d6e3..f7ed97ce0dfd 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
}
void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
@@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
}
void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 567f2598d090..3d2627ec9860 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
@@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
@@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
index dc7aeda15773..62dc379d301a 100644
--- a/arch/alpha/mm/extable.c
+++ b/arch/alpha/mm/extable.c
@@ -3,11 +3,49 @@
*/
#include <linux/module.h>
+#include <linux/sort.h>
#include <asm/uaccess.h>
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+ return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+ struct exception_table_entry *ex_a = a, *ex_b = b;
+ unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+ unsigned int t = ex_a->fixup.unit;
+
+ ex_a->fixup.unit = ex_b->fixup.unit;
+ ex_b->fixup.unit = t;
+ ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+ ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+ const struct exception_table_entry *x = a, *y = b;
+
+ /* avoid overflow */
+ if (ex_to_addr(x) > ex_to_addr(y))
+ return 1;
+ if (ex_to_addr(x) < ex_to_addr(y))
+ return -1;
+ return 0;
+}
+
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
+ sort(start, finish - start, sizeof(struct exception_table_entry),
+ cmp_ex, swap_ex);
}
const struct exception_table_entry *
@@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
unsigned long mid_value;
mid = (last - first) / 2 + first;
- mid_value = (unsigned long)&mid->insn + mid->insn;
+ mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e02b893fb909..e60ec54df334 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -454,6 +454,7 @@ config ARCH_MXC
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
@@ -486,8 +487,6 @@ config ARCH_PXA
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@@ -585,6 +584,8 @@ config ARCH_DAVINCI
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
+ select HAVE_IDE
+ select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
@@ -740,6 +741,56 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 && !SMP
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
endmenu
source "arch/arm/common/Kconfig"
@@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX
If in doubt, say N.
-config CPU_FREQ_PXA
- bool
- depends on CPU_FREQ && ARCH_PXA && PXA25x
- default y
- select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
new file mode 100644
index 000000000000..eb2738b5be5f
--- /dev/null
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -0,0 +1,1784 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index c367ae44012e..dcf8153a947d 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar 3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -237,6 +241,7 @@ CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -293,7 +300,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -1361,6 +1389,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index b0698722e0cb..398274b0771a 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,11 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:22:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
@@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
@@ -87,10 +98,9 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
@@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
#
# Bus support
@@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -248,6 +261,11 @@ CONFIG_CMDLINE=""
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -263,6 +281,8 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -376,6 +392,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -466,6 +482,11 @@ CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -632,11 +669,15 @@ CONFIG_SATA_MV=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -654,19 +714,25 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -676,18 +742,20 @@ CONFIG_NET_PCI=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -799,44 +873,63 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -855,14 +949,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -877,10 +974,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -900,20 +1002,28 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -958,9 +1064,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1151,6 +1328,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig
deleted file mode 100644
index e90f86d6deef..000000000000
--- a/arch/arm/configs/mx31moboard_defconfig
+++ /dev/null
@@ -1,790 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 72a8201a5370..20ada526f6de 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 020e6a8a9e5c..5b98f7645119 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
@@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
@@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
@@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
@@ -270,6 +276,11 @@ CONFIG_CMDLINE=""
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -285,13 +296,18 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -397,6 +424,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -487,6 +514,11 @@ CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -663,6 +709,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -680,19 +746,25 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -702,10 +774,12 @@ CONFIG_NET_PCI=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -911,14 +988,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1013,9 +1103,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1030,10 +1147,13 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1231,6 +1382,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
@@ -1540,7 +1735,7 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 30f463d2fa8a..6ab5dd5868de 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index d7da19bcf928..c207504de84d 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
-#define R_ARM_NONE 0
-#define R_ARM_PC24 1
-#define R_ARM_ABS32 2
-#define R_ARM_CALL 28
-#define R_ARM_JUMP24 29
-#define R_ARM_V4BX 40
-#define R_ARM_PREL31 42
+#define R_ARM_NONE 0
+#define R_ARM_PC24 1
+#define R_ARM_ABS32 2
+#define R_ARM_CALL 28
+#define R_ARM_JUMP24 29
+#define R_ARM_V4BX 40
+#define R_ARM_PREL31 42
+#define R_ARM_MOVW_ABS_NC 43
+#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d1731e39b496..bac03c81489d 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u32 *)loc = offset & 0x7fffffff;
break;
+ case R_ARM_MOVW_ABS_NC:
+ case R_ARM_MOVT_ABS:
+ offset = *(u32 *)loc;
+ offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+ offset = (offset ^ 0x8000) - 0x8000;
+
+ offset += sym->st_value;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u32 *)loc &= 0xfff0f000;
+ *(u32 *)loc |= ((offset & 0xf000) << 4) |
+ (offset & 0x0fff);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index bac988e7a4c3..a9c78bc72b84 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
-config ARCH_DAVINCI644x
- default y
+config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
- bool "TI DaVinci EVM"
+ bool "TI DM644x EVM"
default y
- depends on ARCH_DAVINCI644x
+ depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
- for development is a DaVinci EVM
+ for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+ bool "DAVINCI multiplexing support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ Pin multiplexing support for DAVINCI boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config DAVINCI_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_DAVINCI
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
endmenu
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 4dc458597f40..1674661942f3 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,12 @@
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o mux.o devices.o usb.o
+ gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX) += mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 0b97a528902b..b2e7f9c63bc5 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -15,15 +15,20 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -32,25 +37,34 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
+#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
+#define DM644X_EVM_PHY_MASK (0x2)
+#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define DAVINCI_CFC_ATA_BASE 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
+#define LXT971_PHY_ID (0x001378e2)
+#define LXT971_PHY_MASK (0xfffffff0)
static struct mtd_partition davinci_evm_norflash_partitions[] = {
- /* bootloader (U-Boot, etc) in first 4 sectors */
+ /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
{
.name = "bootloader",
.offset = 0,
- .size = 4 * SZ_64K,
+ .size = 5 * SZ_64K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next 1 sectors */
@@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = {
.resource = &davinci_evm_norflash_resource,
};
-#endif
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+ /* Bootloader layout depends on whose u-boot is installed, but we
+ * can hide all the details.
+ * - block 0 for u-boot environment ... in mainline u-boot
+ * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+ * - blocks 6...? for u-boot
+ * - blocks 16..23 for u-boot environment ... in TI's u-boot
+ */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K + SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* Kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ /* File system (older GIT kernels started this on the 5MB mark) */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash BBT ... created by TI's CCS
+ * using flashwriter_nand.out, but ignored by TI's versions of
+ * Linux and u-boot. We boot faster by using them.
+ */
+};
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+ .parts = davinci_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
+ .resource = davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+ .name = "rtc_davinci_evm",
+ .id = -1,
+};
static struct resource ide_resources[] = {
{
@@ -131,8 +224,6 @@ static struct platform_device ide_dev = {
},
};
-#endif
-
/*----------------------------------------------------------------------*/
/*
@@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+ /* irlml6401 switches over 1A, in under 8 msec;
+ * now it can be managed by nDRV_VBUS ...
+ */
setup_usb(500, 8);
return 0;
@@ -343,14 +436,120 @@ static struct pcf857x_platform_data pcf_data_u35 = {
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+ DECLARE_MAC_BUF(mac_str);
+ char mac_addr[6];
+
+ at24_mem_acc = mem_acc;
+
+ /* Read MAC addr from EEPROM */
+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+ printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+ print_mac(mac_str, mac_addr));
+ }
+}
+
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
+ .setup = at24_setup,
};
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more. It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ dm6446evm_msp = client;
+ return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+ dm6446evm_msp = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+ { "dm6446evm_msp", 0, },
+ { /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+ .driver.name = "dm6446evm_msp",
+ .id_table = dm6446evm_msp_ids,
+ .probe = dm6446evm_msp_probe,
+ .remove = dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+ static const char txbuf[2] = { 2, 4, };
+ char buf[4];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = (void __force *)txbuf,
+ },
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = I2C_M_RD,
+ .len = 4,
+ .buf = buf,
+ },
+ };
+ int status;
+
+ if (!dm6446evm_msp)
+ return -ENXIO;
+
+ /* Command 4 == get input state, returns port 2 and port3 data
+ * S Addr W [A] len=2 [A] cmd=4 [A]
+ * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+ */
+ status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+ if (status < 0)
+ return status;
+
+ dev_dbg(&dm6446evm_msp->dev,
+ "PINS: %02x %02x %02x %02x\n",
+ buf[0], buf[1], buf[2], buf[3]);
+
+ return (buf[3] << 8) | buf[2];
+}
+
static struct i2c_board_info __initdata i2c_info[] = {
{
+ I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+ },
+ {
I2C_BOARD_INFO("pcf8574", 0x38),
.platform_data = &pcf_data_u2,
},
@@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
/* ALSO:
* - tvl320aic33 audio codec (0x1b)
- * - msp430 microcontroller (0x23)
* - tvp5146 video decoder (0x5d)
*/
};
@@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = {
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
+ i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- &davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
- &ide_dev,
-#endif
+ &davinci_fb_device,
+ &rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
};
static void __init
davinci_evm_map_io(void)
{
davinci_map_common_io();
+ dm644x_init();
}
-static __init void davinci_evm_init(void)
+static int davinci_phy_fixup(struct phy_device *phydev)
{
- davinci_psc_init();
+ unsigned int control;
+ /* CRITICAL: Fix for increasing PHY signal drive strength for
+ * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+ * signal strength was low causing TX to fail randomly. The
+ * fix is to Set bit 11 (Increased MII drive strength) of PHY
+ * register 26 (Digital Config register) on this phy. */
+ control = phy_read(phydev, 26);
+ phy_write(phydev, 26, (control | 0x800));
+ return 0;
+}
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
- printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
- "but share pins.\n\t Disable IDE for NOR support.\n");
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+ defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
#endif
+static __init void davinci_evm_init(void)
+{
+ struct clk *aemif_clk;
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND || HAS_NOR)
+ pr_warning("WARNING: both IDE and Flash are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable IDE for NAND/NOR support.\n");
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN);
+ davinci_cfg_reg(DM644X_HDIREN);
+ platform_device_register(&ide_dev);
+ } else if (HAS_NAND || HAS_NOR) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND) {
+ platform_device_register(&davinci_evm_nandflash_device);
+ evm_leds[7].default_trigger = "nand-disk";
+ if (HAS_NOR)
+ pr_warning("WARNING: both NAND and NOR flash "
+ "are enabled; disable one of them.\n");
+ } else if (HAS_NOR)
+ platform_device_register(&davinci_evm_norflash_device);
+ }
+
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
+
+ davinci_serial_init(&uart_config);
+
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+
}
static __init void davinci_evm_irq_init(void)
{
- davinci_init_common_hw();
davinci_irq_init();
}
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index abb92b7eca0c..f0baaa15a57e 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -1,7 +1,8 @@
/*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -13,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
@@ -21,98 +23,50 @@
#include <mach/hardware.h>
#include <mach/psc.h>
+#include <mach/cputype.h>
#include "clock.h"
-/* PLL/Reset register offsets */
-#define PLLM 0x110
-
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000; /* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
+ return (clk->flags & PSC_DSP)
+ ? DAVINCI_GPSC_DSPDOMAIN
+ : DAVINCI_GPSC_ARMDOMAIN;
}
-EXPORT_SYMBOL(clk_get);
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
- return 0;
+ if (clk->parent)
+ __clk_enable(clk->parent);
+ if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
- if (clk->usecount)
+ if (WARN_ON(clk->usecount == 0))
return;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+ if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- if (clk->usecount++ == 0) {
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(clk_enable);
@@ -123,11 +77,9 @@ void clk_disable(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return;
- if (clk->usecount > 0 && !(--clk->usecount)) {
- spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
@@ -164,10 +116,23 @@ int clk_register(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (WARN(clk->parent && !clk->parent->rate,
+ "CLK: %s parent %s has no rate!\n",
+ clk->name, clk->parent->name))
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
+ list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
+ /* If rate is already set, use it */
+ if (clk->rate)
+ return 0;
+
+ /* Otherwise, default to parent rate */
+ if (clk->parent)
+ clk->rate = clk->parent->rate;
+
return 0;
}
EXPORT_SYMBOL(clk_register);
@@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk)
}
EXPORT_SYMBOL(clk_unregister);
-static struct clk davinci_clks[] = {
- {
- .name = "ARMCLK",
- .rate = &armrate,
- .lpsc = -1,
- .flags = ALWAYS_ENABLED,
- },
- {
- .name = "UART",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_UART0,
- },
- {
- .name = "EMACCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
- },
- {
- .name = "I2CCLK",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_I2C,
- },
- {
- .name = "IDECLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_ATA,
- },
- {
- .name = "McBSPCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_McBSP,
- },
- {
- .name = "MMCSDCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_MMC_SD,
- },
- {
- .name = "SPICLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_SPI,
- },
- {
- .name = "gpio",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_GPIO,
- },
- {
- .name = "usb",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_USB,
- },
- {
- .name = "AEMIFCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_AEMIF,
- .usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+
+ spin_lock_irq(&clockfw_lock);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->usecount > 0)
+ continue;
+ if (!(ck->flags & CLK_PSC))
+ continue;
+
+ /* ignore if in Disabled or SwRstDisable states */
+ if (!davinci_psc_is_clk_active(ck->lpsc))
+ continue;
+
+ pr_info("Clocks: disable unused %s\n", ck->name);
+ davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
-};
+ spin_unlock_irq(&clockfw_lock);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
{
- struct clk *clkp;
- int count = 0;
- u32 pll_mult;
-
- pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
- commonrate = ((pll_mult + 1) * 27000000) / 6;
- armrate = ((pll_mult + 1) * 27000000) / 2;
-
- for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
- count++, clkp++) {
- clk_register(clkp);
-
- /* Turn on clocks that have been enabled in the
- * table above */
- if (clkp->usecount)
- clk_enable(clkp);
+ u32 v, plldiv;
+ struct pll_data *pll;
+
+ /* If this is the PLL base clock, no more calculations needed */
+ if (clk->pll_data)
+ return;
+
+ if (WARN_ON(!clk->parent))
+ return;
+
+ clk->rate = clk->parent->rate;
+
+ /* Otherwise, the parent must be a PLL */
+ if (WARN_ON(!clk->parent->pll_data))
+ return;
+
+ pll = clk->parent->pll_data;
+
+ /* If pre-PLL, source clock is before the multiplier and divider(s) */
+ if (clk->flags & PRE_PLL)
+ clk->rate = pll->input_rate;
+
+ if (!clk->div_reg)
+ return;
+
+ v = __raw_readl(pll->base + clk->div_reg);
+ if (v & PLLDIV_EN) {
+ plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+ if (plldiv)
+ clk->rate /= plldiv;
+ }
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+ u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+ u8 bypass;
+ struct pll_data *pll = clk->pll_data;
+
+ pll->base = IO_ADDRESS(pll->phys_base);
+ ctrl = __raw_readl(pll->base + PLLCTL);
+ clk->rate = pll->input_rate = clk->parent->rate;
+
+ if (ctrl & PLLCTL_PLLEN) {
+ bypass = 0;
+ mult = __raw_readl(pll->base + PLLM);
+ mult = (mult & PLLM_PLLM_MASK) + 1;
+ } else
+ bypass = 1;
+
+ if (pll->flags & PLL_HAS_PREDIV) {
+ prediv = __raw_readl(pll->base + PREDIV);
+ if (prediv & PLLDIV_EN)
+ prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+ else
+ prediv = 1;
+ }
+
+ /* pre-divider is fixed, but (some?) chips won't report that */
+ if (cpu_is_davinci_dm355() && pll->num == 1)
+ prediv = 8;
+
+ if (pll->flags & PLL_HAS_POSTDIV) {
+ postdiv = __raw_readl(pll->base + POSTDIV);
+ if (postdiv & PLLDIV_EN)
+ postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+ else
+ postdiv = 1;
+ }
+
+ if (!bypass) {
+ clk->rate /= prediv;
+ clk->rate *= mult;
+ clk->rate /= postdiv;
+ }
+
+ pr_debug("PLL%d: input = %lu MHz [ ",
+ pll->num, clk->parent->rate / 1000000);
+ if (bypass)
+ pr_debug("bypass ");
+ if (prediv > 1)
+ pr_debug("/ %d ", prediv);
+ if (mult > 1)
+ pr_debug("* %d ", mult);
+ if (postdiv > 1)
+ pr_debug("/ %d ", postdiv);
+ pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+ {
+ struct davinci_clk *c;
+ struct clk *clk;
+
+ for (c = clocks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+
+ if (clk->pll_data)
+ clk_pll_init(clk);
+
+ /* Calculate rates for PLL-derived clocks */
+ else if (clk->flags & CLK_PLL)
+ clk_sysclk_recalc(clk);
+
+ if (clk->lpsc)
+ clk->flags |= CLK_PSC;
+
+ clkdev_add(&c->lk);
+ clk_register(clk);
+
+ /* Turn on clocks that Linux doesn't otherwise manage */
+ if (clk->flags & ALWAYS_ENABLED)
+ clk_enable(clk);
}
return 0;
@@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v)
{
}
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX 10 /* longest clock name */
+#define NEST_DELTA 2
+#define NEST_MAX 4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
- struct clk *cp;
+ char *state;
+ char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ if (parent->flags & CLK_PLL)
+ state = "pll";
+ else if (parent->flags & CLK_PSC)
+ state = "psc";
+ else
+ state = "";
+
+ /* <nest spaces> name <pad to end> */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+ buf, parent->usecount, state, clk_get_rate(parent));
+ /* REVISIT show device associations too */
+
+ /* cost is now small, but not linear... */
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->parent == parent)
+ dump_clock(s, nest + NEST_DELTA, clk);
+ }
+}
- list_for_each_entry(cp, &clocks, node)
- seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+ /* Show clock tree; we know the main oscillator is first.
+ * We trust nonzero usecounts equate to PSC enables...
+ */
+ mutex_lock(&clocks_mutex);
+ if (!list_empty(&clocks))
+ dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+ mutex_unlock(&clocks_mutex);
return 0;
}
@@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void)
}
__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index ed47079a52e4..35736ec202f8 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -1,7 +1,8 @@
/*
* TI DaVinci clock definitions
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,23 +12,85 @@
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL 0x100
+#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_CLKMODE BIT(8)
+
+#define PLLM 0x110
+#define PLLM_PLLM_MASK 0xff
+
+#define PREDIV 0x114
+#define PLLDIV1 0x118
+#define PLLDIV2 0x11c
+#define PLLDIV3 0x120
+#define POSTDIV 0x128
+#define BPDIV 0x12c
+#define PLLCMD 0x138
+#define PLLSTAT 0x13c
+#define PLLALNCTL 0x140
+#define PLLDCHANGE 0x144
+#define PLLCKEN 0x148
+#define PLLCKSTAT 0x14c
+#define PLLSYSTAT 0x150
+#define PLLDIV4 0x160
+#define PLLDIV5 0x164
+#define PLLDIV6 0x168
+#define PLLDIV7 0x16c
+#define PLLDIV8 0x170
+#define PLLDIV9 0x174
+#define PLLDIV_EN BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+ u32 phys_base;
+ void __iomem *base;
+ u32 num;
+ u32 flags;
+ u32 input_rate;
+};
+#define PLL_HAS_PREDIV 0x01
+#define PLL_HAS_POSTDIV 0x02
+
struct clk {
struct list_head node;
struct module *owner;
const char *name;
- unsigned int *rate;
- int id;
- __s8 usecount;
- __u8 flags;
- __u8 lpsc;
+ unsigned long rate;
+ u8 usecount;
+ u8 flags;
+ u8 lpsc;
+ struct clk *parent;
+ struct pll_data *pll_data;
+ u32 div_reg;
};
/* Clock flags */
-#define RATE_CKCTL 1
-#define RATE_FIXED 2
-#define RATE_PROPAGATES 4
-#define VIRTUAL_CLOCK 8
-#define ALWAYS_ENABLED 16
-#define ENABLE_REG_32BIT 32
+#define ALWAYS_ENABLED BIT(1)
+#define CLK_PSC BIT(2)
+#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL BIT(4) /* PLL-derived clock */
+#define PRE_PLL BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+int davinci_clk_init(struct davinci_clk *clocks);
#endif
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 808633f9f03c..a31370b93dd2 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -21,6 +21,10 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
@@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
+ if (cpu_is_davinci_dm644x())
+ davinci_cfg_reg(DM644X_I2C);
+
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
new file mode 100644
index 000000000000..d428ef192eac
--- /dev/null
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -0,0 +1,461 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ 27000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+ .name = "pll2_sysclk2",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_GEM,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+ .name = "vicp",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+ .name = "ide",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+ .name = "mmcsd",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+ .name = "spi",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+ .name = "vlynq",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "vicp", &vicp_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("palm_bk3710", NULL, &ide_clk),
+ CLK("soc-audio.0", NULL, &asp_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+ CLK(NULL, "spi", &spi_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, "vlynq", &vlynq_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+ {
+ .start = DM644X_EMAC_BASE,
+ .end = DM644X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_EMACINT,
+ .end = IRQ_EMACINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm644x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dm644x_emac_resources),
+ .resource = dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
+MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
+MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
+
+MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
+
+MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
+
+MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
+
+MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
+
+MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
+MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
+
+MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
+
+MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
+
+MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
+
+MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
+MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
+MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
+
+MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
+
+MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
+
+MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
+MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
+MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
+MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
+
+MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
+
+MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
+MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+ 0, 1, 12, 13, 14,
+ 15, 25, 30, 31, 45,
+ 46, 47, 55, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm644x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+ davinci_clk_init(dm644x_clks);
+ davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm644x())
+ return 0;
+
+ platform_device_register(&dm644x_edma_device);
+ return 0;
+}
+postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
new file mode 100644
index 000000000000..15e9eb158bb7
--- /dev/null
+++ b/arch/arm/mach-davinci/dma.c
@@ -0,0 +1,1135 @@
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE 0x01C00000
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+#define EDMA_MAX_EVQUE 2 /* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ val |= or;
+ edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val |= or;
+ edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+ return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+ edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+ edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+ edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+ edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+ return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+ return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+ return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+ edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+ edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+ edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform. It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+ {0, 0},
+ {1, 1},
+ {-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {1, 7},
+ {-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = EVENTQ_1;
+
+ queue_no &= 7;
+ edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ if (!callback) {
+ edma_shadow0_write_array(SH_IECR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+
+ intr_data[lch].callback = callback;
+ intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(SH_ICR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ edma_shadow0_write_array(SH_IESR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+ && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j;
+ if (edma_shadow0_read_array(SH_IPR, 0))
+ j = 0;
+ else if (edma_shadow0_read_array(SH_IPR, 1))
+ j = 1;
+ else
+ break;
+ dev_dbg(data, "IPR%d %08x\n", j,
+ edma_shadow0_read_array(SH_IPR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(SH_ICR, j, (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k, DMA_COMPLETE,
+ intr_data[k].data);
+ }
+ }
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_shadow0_write(SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+ (edma_read_array(EDMA_EMR, 1) == 0) &&
+ (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, 1 << i);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j,
+ (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k,
+ DMA_CC_ERROR,
+ intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_QEMR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_QEMCR, 1 << i);
+ edma_shadow0_write(SH_QSECR, (1 << i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_CCERR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_CCERRCLR, 1 << i);
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(EDMA_EMR, 0) == 0)
+ && (edma_read_array(EDMA_EMR, 1) == 0)
+ && (edma_read(EDMA_QEMR) == 0)
+ && (edma_read(EDMA_CCERR) == 0)) {
+ break;
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled false /* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc0err_handler\n");
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc1err_handler\n");
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ if (channel < 0) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_noevent,
+ num_channels, channel);
+ if (channel == num_channels)
+ return -ENOMEM;
+ if (!test_and_set_bit(channel, edma_inuse))
+ break;
+ channel++;
+ }
+ } else if (channel >= num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(channel);
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(channel, callback, data);
+
+ map_dmach_queue(channel, eventq_no);
+
+ return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+ if (slot < 0) {
+ slot = num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_inuse,
+ num_slots, slot);
+ if (slot == num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_inuse))
+ break;
+ }
+ } else if (slot < num_channels || slot >= num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ if (slot < num_channels || slot >= num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot. Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct edmacc_param temp;
+
+ edma_read_slot(slot, &temp);
+ if (src != NULL)
+ *src = temp.src;
+ if (dst != NULL)
+ *dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ if (from >= num_slots)
+ return;
+ if (to >= num_slots)
+ return;
+ edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ if (from >= num_slots)
+ return;
+ edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_noevent)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(SH_ESR, j));
+ edma_shadow0_write_array(SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(SH_ER, j));
+ /* Clear any pending error */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_shadow0_write_array(SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, j, mask);
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write_array(EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = 1 << (channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+ if (channel < 32)
+ edma_write(EDMA_ECR, 1 << channel);
+ else
+ edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info *info = pdev->dev.platform_data;
+ int i;
+ int status;
+ const s8 *noevent;
+ int irq = 0, err_irq = 0;
+ struct resource *r;
+ resource_size_t len;
+
+ if (!info)
+ return -ENODEV;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+ if (!r)
+ return -ENODEV;
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r)
+ return -EBUSY;
+
+ edmacc_regs_base = ioremap(r->start, len);
+ if (!edmacc_regs_base) {
+ status = -EBUSY;
+ goto fail1;
+ }
+
+ num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+ num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+ for (i = 0; i < num_slots; i++)
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ noevent = info->noevent;
+ if (noevent) {
+ while (*noevent != -1)
+ set_bit(*noevent++, edma_noevent);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ irq, status);
+ goto fail;
+ }
+
+ err_irq = platform_get_irq(pdev, 1);
+ status = request_irq(err_irq, dma_ccerr_handler, 0,
+ "edma_error", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ err_irq, status);
+ goto fail;
+ }
+
+ if (tc_errs_handled) {
+ status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+ "edma_tc0", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ IRQ_TCERRINT0, status);
+ return status;
+ }
+ status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+ "edma_tc1", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+ IRQ_TCERRINT, status);
+ return status;
+ }
+ }
+
+ /* Everything lives on transfer controller 1 until otherwise specified.
+ * This way, long transfers on the low priority queue
+ * started by the codec engine will not cause audio defects.
+ */
+ for (i = 0; i < num_channels; i++)
+ map_dmach_queue(i, EVENTQ_1);
+
+ /* Event queue to TC mapping */
+ for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+ map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ for (i = 0; i < info->n_region; i++) {
+ edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(EDMA_QRAE, i, 0x0);
+ }
+
+ return 0;
+
+fail:
+ if (err_irq)
+ free_irq(err_irq, NULL);
+ if (irq)
+ free_irq(irq, NULL);
+ iounmap(edmacc_regs_base);
+fail1:
+ release_mem_region(r->start, len);
+ return status;
+}
+
+
+static struct platform_driver edma_driver = {
+ .driver.name = "edma",
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index b49e9d092aab..1aba41c6351e 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/bitops.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -36,9 +37,10 @@ struct davinci_gpio {
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static unsigned __initdata ngpio;
/* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
@@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
{
int i, base;
- for (i = 0, base = 0;
- i < ARRAY_SIZE(chips);
- i++, base += 32) {
+ /* The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ ngpio = 104;
+ } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
+ ngpio = 71;
+ } else if (cpu_is_davinci_dm646x()) {
+ /* NOTE: each bank has several "reserved" bits,
+ * unusable as GPIOs. Only 33 of the GPIO numbers
+ * are usable, and we're not rejecting the others.
+ */
+ ngpio = 43;
+ } else {
+ /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
@@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
- chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
@@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
- * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
- * a good way to hook those up ...
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options). We don't try to use those.
*
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
@@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
/*
- * NOTE: for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
+ unsigned bank_irq;
struct clk *clk;
+ u32 binten = 0;
+
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ bank_irq = IRQ_DM355_GPIOBNK0;
+ } else if (cpu_is_davinci_dm644x()) {
+ bank_irq = IRQ_GPIOBNK0;
+ } else if (cpu_is_davinci_dm646x()) {
+ bank_irq = IRQ_DM646X_GPIOBNK0;
+ } else {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
- return 0;
+ return PTR_ERR(clk);
}
-
clk_enable(clk);
- for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
- gpio < DAVINCI_N_GPIO; bank++) {
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
@@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
- set_irq_chained_handler(bank, gpio_irq_handler);
- set_irq_chip_data(bank, g);
- set_irq_data(bank, (void *)irq);
+ set_irq_chained_handler(bank_irq, gpio_irq_handler);
+ set_irq_chip_data(bank_irq, g);
+ set_irq_data(bank_irq, (void *)irq);
- for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
- i++, irq++, gpio++) {
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
+ binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(0x1f, (void *__iomem)
+ __raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-
arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
index bf067d604918..018b994cd794 100644
--- a/arch/arm/mach-davinci/id.c
+++ b/arch/arm/mach-davinci/id.c
@@ -15,7 +15,9 @@
#include <linux/init.h>
#include <linux/io.h>
-#define JTAG_ID_BASE 0x01c40028
+#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
@@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
.manufacturer = 0x017,
.type = 0x64460000,
},
+ {
+ /* DM646X */
+ .part_no = 0xb770,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64670000,
+ },
+ {
+ /* DM355 */
+ .part_no = 0xb73b,
+ .variant = 0x0,
+ .manufacturer = 0x00f,
+ .type = 0x03550000,
+ },
};
/*
@@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
{
u32 dev_id, part_no;
- dev_id = davinci_readl(JTAG_ID_BASE);
+ dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
@@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void)
{
u32 variant;
- variant = davinci_readl(JTAG_ID_BASE);
+ variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
+unsigned int davinci_rev(void)
+{
+ return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
void __init davinci_check_revision(void)
{
int i;
@@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
@@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
- printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+ printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+ davinci_rev(), variant);
}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
new file mode 100644
index 000000000000..3216f21c1238
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h
new file mode 100644
index 000000000000..730c49d1ebd8
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clkdev.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
index 38bdd49bc181..a3b040219876 100644
--- a/arch/arm/mach-davinci/include/mach/clock.h
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -17,6 +17,5 @@ struct clk;
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 4b522e5c70ec..191770976250 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -16,6 +16,12 @@ struct sys_timer;
extern struct sys_timer davinci_timer;
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
new file mode 100644
index 000000000000..27cfb1b3a662
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -0,0 +1,49 @@
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type. In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_dm ##type(void) \
+{ \
+ return (davinci_rev() == (id)) ? 1 : 0; \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
new file mode 100644
index 000000000000..3dcb9f4e58b4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -0,0 +1,37 @@
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE (0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM644X_EMAC_MDIO_OFFSET (0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
new file mode 100644
index 000000000000..f6fc5396dafc
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -0,0 +1,228 @@
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT 16
+#define CCERRINT_INTERRUPT 17
+#define TCERRINT0_INTERRUPT 18
+#define TCERRINT1_INTERRUPT 19
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead. (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX 2
+#define DAVINCI_DMA_MCBSP_RX 3
+#define DAVINCI_DMA_VPSS_HIST 4
+#define DAVINCI_DMA_VPSS_H3A 5
+#define DAVINCI_DMA_VPSS_PRVU 6
+#define DAVINCI_DMA_VPSS_RSZ 7
+#define DAVINCI_DMA_IMCOP_IMXINT 8
+#define DAVINCI_DMA_IMCOP_VLCDINT 9
+#define DAVINCI_DMA_IMCO_PASQINT 10
+#define DAVINCI_DMA_IMCOP_DSQINT 11
+#define DAVINCI_DMA_SPI_SPIX 16
+#define DAVINCI_DMA_SPI_SPIR 17
+#define DAVINCI_DMA_UART0_URXEVT0 18
+#define DAVINCI_DMA_UART0_UTXEVT0 19
+#define DAVINCI_DMA_UART1_URXEVT1 20
+#define DAVINCI_DMA_UART1_UTXEVT1 21
+#define DAVINCI_DMA_UART2_URXEVT2 22
+#define DAVINCI_DMA_UART2_UTXEVT2 23
+#define DAVINCI_DMA_MEMSTK_MSEVT 24
+#define DAVINCI_DMA_MMCRXEVT 26
+#define DAVINCI_DMA_MMCTXEVT 27
+#define DAVINCI_DMA_I2C_ICREVT 28
+#define DAVINCI_DMA_I2C_ICXEVT 29
+#define DAVINCI_DMA_GPIO_GPINT0 32
+#define DAVINCI_DMA_GPIO_GPINT1 33
+#define DAVINCI_DMA_GPIO_GPINT2 34
+#define DAVINCI_DMA_GPIO_GPINT3 35
+#define DAVINCI_DMA_GPIO_GPINT4 36
+#define DAVINCI_DMA_GPIO_GPINT5 37
+#define DAVINCI_DMA_GPIO_GPINT6 38
+#define DAVINCI_DMA_GPIO_GPINT7 39
+#define DAVINCI_DMA_GPIO_GPBNKINT0 40
+#define DAVINCI_DMA_GPIO_GPBNKINT1 41
+#define DAVINCI_DMA_GPIO_GPBNKINT2 42
+#define DAVINCI_DMA_GPIO_GPBNKINT3 43
+#define DAVINCI_DMA_GPIO_GPBNKINT4 44
+#define DAVINCI_DMA_TIMER0_TINT0 48
+#define DAVINCI_DMA_TIMER1_TINT1 49
+#define DAVINCI_DMA_TIMER2_TINT2 50
+#define DAVINCI_DMA_TIMER3_TINT3 51
+#define DAVINCI_DMA_PWM0 52
+#define DAVINCI_DMA_PWM1 53
+#define DAVINCI_DMA_PWM2 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index b456f079f43f..efe3281364e6 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -15,9 +15,11 @@
#include <linux/io.h>
#include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
#include <mach/irqs.h>
+#define DAVINCI_GPIO_BASE 0x01C67000
+
/*
* basic gpio routines
*
@@ -26,23 +28,18 @@
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
-#define GPIO(X) (X) /* 0 <= X <= 70 */
-#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
-#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
@@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
- if (gpio < 32)
+ if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
- else if (gpio < 64)
+ else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
- else if (gpio < DAVINCI_N_GPIO)
+ else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ else if (gpio < 32 * 4)
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index a2e8969afaca..48c77934d519 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -1,9 +1,9 @@
/*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
*
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
*
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@@ -12,41 +12,16 @@
#define __ASM_ARCH_HARDWARE_H
/*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
*/
-#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
-#define DAVINCI_I2C_BASE (0x01C21000)
-#define DAVINCI_PWM0_BASE (0x01C22000)
-#define DAVINCI_PWM1_BASE (0x01C22400)
-#define DAVINCI_PWM2_BASE (0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
-#define DAVINCI_IEEE1394_BASE (0x01C60000)
-#define DAVINCI_USB_OTG_BASE (0x01C64000)
-#define DAVINCI_CFC_ATA_BASE (0x01C66000)
-#define DAVINCI_SPI_BASE (0x01C66800)
-#define DAVINCI_GPIO_BASE (0x01C67000)
-#define DAVINCI_UHPI_BASE (0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
-#define DAVINCI_IMCOP_BASE (0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
-#define DAVINCI_VLYNQ_BASE (0x01E01000)
-#define DAVINCI_MCBSP_BASE (0x01E02000)
-#define DAVINCI_MMC_SD_BASE (0x01E10000)
-#define DAVINCI_MS_BASE (0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index a48795fd2417..2479785405af 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -40,22 +40,12 @@
#else
#define IOMEM(x) ((void __force __iomem *)(x))
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
- */
-#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
+#define __arch_iounmap(v) davinci_iounmap(v)
-#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+ unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index f4c5ca6da9f4..18066074c995 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -96,10 +96,111 @@
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
-#define DAVINCI_N_GPIO 71
+#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0 0
+#define IRQ_DM646X_VP_VERTINT1 1
+#define IRQ_DM646X_VP_VERTINT2 2
+#define IRQ_DM646X_VP_VERTINT3 3
+#define IRQ_DM646X_VP_ERRINT 4
+#define IRQ_DM646X_RESERVED_1 5
+#define IRQ_DM646X_RESERVED_2 6
+#define IRQ_DM646X_WDINT 7
+#define IRQ_DM646X_CRGENINT0 8
+#define IRQ_DM646X_CRGENINT1 9
+#define IRQ_DM646X_TSIFINT0 10
+#define IRQ_DM646X_TSIFINT1 11
+#define IRQ_DM646X_VDCEINT 12
+#define IRQ_DM646X_USBINT 13
+#define IRQ_DM646X_USBDMAINT 14
+#define IRQ_DM646X_PCIINT 15
+#define IRQ_DM646X_TCERRINT2 20
+#define IRQ_DM646X_TCERRINT3 21
+#define IRQ_DM646X_IDE 22
+#define IRQ_DM646X_HPIINT 23
+#define IRQ_DM646X_EMACRXTHINT 24
+#define IRQ_DM646X_EMACRXINT 25
+#define IRQ_DM646X_EMACTXINT 26
+#define IRQ_DM646X_EMACMISCINT 27
+#define IRQ_DM646X_MCASP0TXINT 28
+#define IRQ_DM646X_MCASP0RXINT 29
+#define IRQ_DM646X_RESERVED_3 31
+#define IRQ_DM646X_MCASP1TXINT 32
+#define IRQ_DM646X_VLQINT 38
+#define IRQ_DM646X_UARTINT2 42
+#define IRQ_DM646X_SPINT0 43
+#define IRQ_DM646X_SPINT1 44
+#define IRQ_DM646X_DSP2ARMINT 45
+#define IRQ_DM646X_RESERVED_4 46
+#define IRQ_DM646X_PSCINT 47
+#define IRQ_DM646X_GPIO0 48
+#define IRQ_DM646X_GPIO1 49
+#define IRQ_DM646X_GPIO2 50
+#define IRQ_DM646X_GPIO3 51
+#define IRQ_DM646X_GPIO4 52
+#define IRQ_DM646X_GPIO5 53
+#define IRQ_DM646X_GPIO6 54
+#define IRQ_DM646X_GPIO7 55
+#define IRQ_DM646X_GPIOBNK0 56
+#define IRQ_DM646X_GPIOBNK1 57
+#define IRQ_DM646X_GPIOBNK2 58
+#define IRQ_DM646X_DDRINT 59
+#define IRQ_DM646X_AEMIFINT 60
+
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0 0
+#define IRQ_DM355_CCDC_VDINT1 1
+#define IRQ_DM355_CCDC_VDINT2 2
+#define IRQ_DM355_IPIPE_HST 3
+#define IRQ_DM355_H3AINT 4
+#define IRQ_DM355_IPIPE_SDR 5
+#define IRQ_DM355_IPIPEIFINT 6
+#define IRQ_DM355_OSDINT 7
+#define IRQ_DM355_VENCINT 8
+#define IRQ_DM355_IMCOPINT 11
+#define IRQ_DM355_RTOINT 13
+#define IRQ_DM355_TINT4 13
+#define IRQ_DM355_TINT2_TINT12 13
+#define IRQ_DM355_UARTINT2 14
+#define IRQ_DM355_TINT5 14
+#define IRQ_DM355_TINT2_TINT34 14
+#define IRQ_DM355_TINT6 15
+#define IRQ_DM355_TINT3_TINT12 15
+#define IRQ_DM355_SPINT1_0 17
+#define IRQ_DM355_SPINT1_1 18
+#define IRQ_DM355_SPINT2_0 19
+#define IRQ_DM355_SPINT2_1 21
+#define IRQ_DM355_TINT7 22
+#define IRQ_DM355_TINT3_TINT34 22
+#define IRQ_DM355_SDIOINT0 23
+#define IRQ_DM355_MMCINT0 26
+#define IRQ_DM355_MSINT 26
+#define IRQ_DM355_MMCINT1 27
+#define IRQ_DM355_PWMINT3 28
+#define IRQ_DM355_SDIOINT1 31
+#define IRQ_DM355_SPINT0_0 42
+#define IRQ_DM355_SPINT0_1 43
+#define IRQ_DM355_GPIO0 44
+#define IRQ_DM355_GPIO1 45
+#define IRQ_DM355_GPIO2 46
+#define IRQ_DM355_GPIO3 47
+#define IRQ_DM355_GPIO4 48
+#define IRQ_DM355_GPIO5 49
+#define IRQ_DM355_GPIO6 50
+#define IRQ_DM355_GPIO7 51
+#define IRQ_DM355_GPIO8 52
+#define IRQ_DM355_GPIO9 53
+#define IRQ_DM355_GPIOBNK0 54
+#define IRQ_DM355_GPIOBNK1 55
+#define IRQ_DM355_GPIOBNK2 56
+#define IRQ_DM355_GPIOBNK3 57
+#define IRQ_DM355_GPIOBNK4 58
+#define IRQ_DM355_GPIOBNK5 59
+#define IRQ_DM355_GPIOBNK6 60
+
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c24b6782804d..bae22cb3e27b 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -1,55 +1,183 @@
/*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0 0
-#define DAVINCI_MUX_AEAW1 1
-#define DAVINCI_MUX_AEAW2 2
-#define DAVINCI_MUX_AEAW3 3
-#define DAVINCI_MUX_AEAW4 4
-#define DAVINCI_MUX_AECS4 10
-#define DAVINCI_MUX_AECS5 11
-#define DAVINCI_MUX_VLYNQWD0 12
-#define DAVINCI_MUX_VLYNQWD1 13
-#define DAVINCI_MUX_VLSCREN 14
-#define DAVINCI_MUX_VLYNQEN 15
-#define DAVINCI_MUX_HDIREN 16
-#define DAVINCI_MUX_ATAEN 17
-#define DAVINCI_MUX_RGB666 22
-#define DAVINCI_MUX_RGB888 23
-#define DAVINCI_MUX_LOEEN 24
-#define DAVINCI_MUX_LFLDEN 25
-#define DAVINCI_MUX_CWEN 26
-#define DAVINCI_MUX_CFLDEN 27
-#define DAVINCI_MUX_HPIEN 29
-#define DAVINCI_MUX_1394EN 30
-#define DAVINCI_MUX_EMACEN 31
-
-#define DAVINCI_MUX_LEVEL2 32
-#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+/* dm355 only */
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+struct mux_config {
+ const char *name;
+ const char *mux_reg_name;
+ const unsigned char mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+ const unsigned char mode;
+ bool debug;
+};
+
+enum davinci_dm644x_index {
+ /* ATA and HDDIR functions */
+ DM644X_HDIREN,
+ DM644X_ATAEN,
+ DM644X_ATAEN_DISABLE,
+
+ /* HPI functions */
+ DM644X_HPIEN_DISABLE,
+
+ /* AEAW functions */
+ DM644X_AEAW,
+
+ /* Memory Stick */
+ DM644X_MSTK,
+
+ /* I2C */
+ DM644X_I2C,
+
+ /* ASP function */
+ DM644X_MCBSP,
+
+ /* UART1 */
+ DM644X_UART1,
+
+ /* UART2 */
+ DM644X_UART2,
+
+ /* PWM0 */
+ DM644X_PWM0,
+
+ /* PWM1 */
+ DM644X_PWM1,
+
+ /* PWM2 */
+ DM644X_PWM2,
+
+ /* VLYNQ function */
+ DM644X_VLYNQEN,
+ DM644X_VLSCREN,
+ DM644X_VLYNQWD,
+
+ /* EMAC and MDIO function */
+ DM644X_EMACEN,
+
+ /* GPIO3V[0:16] pins */
+ DM644X_GPIO3V,
+
+ /* GPIO pins */
+ DM644X_GPIO0,
+ DM644X_GPIO3,
+ DM644X_GPIO43_44,
+ DM644X_GPIO46_47,
+
+ /* VPBE */
+ DM644X_RGB666,
+
+ /* LCD */
+ DM644X_LOEEN,
+ DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+ /* ATA function */
+ DM646X_ATAEN,
+
+ /* AUDIO Clock */
+ DM646X_AUDCK1,
+ DM646X_AUDCK0,
+
+ /* CRGEN Control */
+ DM646X_CRGMUX,
+
+ /* VPIF Control */
+ DM646X_STSOMUX_DISABLE,
+ DM646X_STSIMUX_DISABLE,
+ DM646X_PTSOMUX_DISABLE,
+ DM646X_PTSIMUX_DISABLE,
+
+ /* TSIF Control */
+ DM646X_STSOMUX,
+ DM646X_STSIMUX,
+ DM646X_PTSOMUX_PARALLEL,
+ DM646X_PTSIMUX_PARALLEL,
+ DM646X_PTSOMUX_SERIAL,
+ DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+ /* MMC/SD 0 */
+ DM355_MMCSD0,
+
+ /* MMC/SD 1 */
+ DM355_SD1_CLK,
+ DM355_SD1_CMD,
+ DM355_SD1_DATA3,
+ DM355_SD1_DATA2,
+ DM355_SD1_DATA1,
+ DM355_SD1_DATA0,
+
+ /* I2C */
+ DM355_I2C_SDA,
+ DM355_I2C_SCL,
+
+ /* ASP0 function */
+ DM355_MCBSP0_BDX,
+ DM355_MCBSP0_X,
+ DM355_MCBSP0_BFSX,
+ DM355_MCBSP0_BDR,
+ DM355_MCBSP0_R,
+ DM355_MCBSP0_BFSR,
+
+ /* SPI0 */
+ DM355_SPI0_SDI,
+ DM355_SPI0_SDENA0,
+ DM355_SPI0_SDENA1,
+
+ /* IRQ muxing */
+ DM355_INT_EDMA_CC,
+ DM355_INT_EDMA_TC0_ERR,
+ DM355_INT_EDMA_TC1_ERR,
+
+ /* EDMA event muxing */
+ DM355_EVT8_ASP1_TX,
+ DM355_EVT9_ASP1_RX,
+ DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 4977aa071e1e..55a90d419fac 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -38,8 +38,6 @@
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
-#define DAVINCI_LPSC_MDIO 7
-#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
@@ -47,7 +45,6 @@
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
-#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
@@ -73,4 +70,54 @@
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DM355_LPSC_TIMER3 5
+#define DM355_LPSC_SPI1 6
+#define DM355_LPSC_MMC_SD1 7
+#define DM355_LPSC_McBSP1 8
+#define DM355_LPSC_PWM3 10
+#define DM355_LPSC_SPI2 11
+#define DM355_LPSC_RTO 12
+#define DM355_LPSC_VPSS_DAC 41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM 0
+#define DM646X_LPSC_C64X_CPU 1
+#define DM646X_LPSC_HDVICP0 2
+#define DM646X_LPSC_HDVICP1 3
+#define DM646X_LPSC_TPCC 4
+#define DM646X_LPSC_TPTC0 5
+#define DM646X_LPSC_TPTC1 6
+#define DM646X_LPSC_TPTC2 7
+#define DM646X_LPSC_TPTC3 8
+#define DM646X_LPSC_PCI 13
+#define DM646X_LPSC_EMAC 14
+#define DM646X_LPSC_VDCE 15
+#define DM646X_LPSC_VPSSMSTR 16
+#define DM646X_LPSC_VPSSSLV 17
+#define DM646X_LPSC_TSIF0 18
+#define DM646X_LPSC_TSIF1 19
+#define DM646X_LPSC_DDR_EMIF 20
+#define DM646X_LPSC_AEMIF 21
+#define DM646X_LPSC_McASP0 22
+#define DM646X_LPSC_McASP1 23
+#define DM646X_LPSC_CRGEN0 24
+#define DM646X_LPSC_CRGEN1 25
+#define DM646X_LPSC_UART0 26
+#define DM646X_LPSC_UART1 27
+#define DM646X_LPSC_UART2 28
+#define DM646X_LPSC_PWM0 29
+#define DM646X_LPSC_PWM1 30
+#define DM646X_LPSC_I2C 31
+#define DM646X_LPSC_SPI 32
+#define DM646X_LPSC_GPIO 33
+#define DM646X_LPSC_TIMER0 34
+#define DM646X_LPSC_TIMER1 35
+#define DM646X_LPSC_ARM_INTC 45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+ char enable);
+
#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index fb8cb229bfd2..632847d74a1c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -13,8 +13,23 @@
#include <mach/io.h>
-#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS 3
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU 0x0c
+#define UART_DM646X_SCR 0x10
+#define UART_DM646X_SCR_TX_WATERMARK 0x08
+
+struct davinci_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 299515f70b8b..a548abb513e2 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -51,7 +51,26 @@ void __init davinci_map_common_io(void)
davinci_check_revision();
}
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+ if (BETWEEN(p, IO_PHYS, IO_SIZE))
+ return XLATE(p, IO_PHYS, IO_VIRT);
+
+ return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
{
- davinci_clk_init();
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
}
+EXPORT_SYMBOL(davinci_iounmap);
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 38021af8359a..5a324c90e291 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -25,6 +25,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
@@ -40,14 +41,18 @@
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
+const u8 *davinci_def_priorities;
+
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
static inline unsigned int davinci_irq_readl(int offset)
{
- return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+ return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+ __raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
@@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = {
.unmask = davinci_unmask_irq,
};
-
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
@@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_EMUINT] = 7,
};
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
- const u8 *priority = default_priorities;
+
+ if (cpu_is_davinci_dm644x())
+ davinci_def_priorities = dm644x_default_priorities;
+ else if (cpu_is_davinci_dm646x())
+ davinci_def_priorities = dm646x_default_priorities;
+ else if (cpu_is_davinci_dm355())
+ davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
@@ -209,8 +351,8 @@ void __init davinci_irq_init(void)
unsigned j;
u32 pri;
- for (j = 0, pri = 0; j < 32; j += 4, priority++)
- pri |= (*priority & 0x07) << j;
+ for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+ pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 8ff9d8aca60b..bbba0b247a44 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -1,41 +1,103 @@
/*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
-
#include <mach/mux.h>
-/* System control register offsets */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+ unsigned long size)
+{
+ mux_table = pins;
+ pin_table_sz = size;
-static DEFINE_SPINLOCK(mux_lock);
+ return 0;
+}
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
{
- u32 pinmux, muxreg = PINMUX0;
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ unsigned long flags;
+ const struct mux_config *cfg;
+ unsigned int reg_orig = 0, reg = 0;
+ unsigned int mask, warn = 0;
+
+ if (!mux_table)
+ BUG();
+
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ cfg = &mux_table[index];
+
+ if (cfg->name == NULL) {
+ printk(KERN_ERR "No entry for the specified index\n");
+ return -ENODEV;
+ }
+
+ /* Update the mux register in question */
+ if (cfg->mask) {
+ unsigned tmp1, tmp2;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg_orig = __raw_readl(base + cfg->mux_reg);
+
+ mask = (cfg->mask << cfg->mask_offset);
+ tmp1 = reg_orig & mask;
+ reg = reg_orig & ~mask;
+
+ tmp2 = (cfg->mode << cfg->mask_offset);
+ reg |= tmp2;
+
+ if (tmp1 != tmp2)
+ warn = 1;
+
+ __raw_writel(reg, base + cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+ printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+ }
- if (mux >= DAVINCI_MUX_LEVEL2) {
- muxreg = PINMUX1;
- mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+ if (cfg->debug || warn) {
+ printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+ printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
+#endif
- spin_lock(&mux_lock);
- pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- if (enable)
- pinmux |= (1 << mux);
- else
- pinmux &= ~(1 << mux);
- davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- spin_unlock(&mux_lock);
+ return 0;
}
+EXPORT_SYMBOL(davinci_cfg_reg);
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
new file mode 100644
index 000000000000..adc869413371
--- /dev/null
+++ b/arch/arm/mach-davinci/mux.h
@@ -0,0 +1,51 @@
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "PINMUX"#muxreg, \
+ .mux_reg = PINMUX##muxreg, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "INTMUX", \
+ .mux_reg = INTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "EVTMUX", \
+ .mux_reg = EVTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#endif /* _MACH_DAVINCI_MUX_H */
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 58754f066d5b..84171abf5f7b 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,10 +23,13 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
@@ -36,102 +39,61 @@
#define MDSTAT 0x800
#define MDCTL 0xA00
-/* System control register offsets */
-#define VDD3P3V_PWDN 0x48
+#define MDSTAT_STATE_MASK 0x1f
-static void davinci_psc_mux(unsigned int id)
+/* Return nonzero iff the domain's clock is active */
+int __init davinci_psc_is_clk_active(unsigned int id)
{
- switch (id) {
- case DAVINCI_LPSC_ATA:
- davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
- davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
- break;
- case DAVINCI_LPSC_MMC_SD:
- /* VDD power manupulations are done in U-Boot for CPMAC
- * so applies to MMC as well
- */
- /*Set up the pull regiter for MMC */
- davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
- davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
- break;
- case DAVINCI_LPSC_I2C:
- davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
- break;
- case DAVINCI_LPSC_McBSP:
- davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
- break;
- default:
- break;
- }
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+
+ /* if clocked, state can be "Enable" or "SyncReset" */
+ return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
- mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
- if (enable)
- mdctl |= 0x00000003; /* Enable Module */
- else
- mdctl &= 0xFFFFFFF2; /* Disable Module */
- davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+ mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ __raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+ pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- EPCPR);
+ epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- PTSTAT);
+ ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
- if (enable)
- mdstat_mask = 0x3;
- else
- mdstat_mask = 0x2;
-
do {
- mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- MDSTAT + 4 * id);
- } while (!((mdstat & 0x0000001F) == mdstat_mask));
-
- if (enable)
- davinci_psc_mux(id);
-}
-
-void __init davinci_psc_init(void)
-{
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
-
- /* Turn on WatchDog timer LPSC. Needed for RESET to work */
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 3010f9971255..695075796522 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -32,32 +32,47 @@
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include "clock.h"
-#define UART_DAVINCI_PWREMU 0x0c
-
-static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
- int offset)
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+ int offset)
{
offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
+ return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
-static inline void davinci_serial_outp(struct plat_serial8250_port *p,
- int offset, int value)
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+ int value)
{
offset <<= p->regshift;
- __raw_writeb(value, p->membase + offset);
+ __raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
- .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = 27000000,
},
{
.flags = 0
@@ -74,22 +89,68 @@ static struct platform_device serial_device = {
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
- /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
- davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+ serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+ if (cpu_is_davinci_dm646x())
+ serial_write_reg(p, UART_DM646X_SCR,
+ UART_DM646X_SCR_TX_WATERMARK);
+}
+
+void __init davinci_serial_init(struct davinci_uart_config *info)
+{
+ int i;
+ char name[16];
+ struct clk *uart_clk;
+ struct device *dev = &serial_device.dev;
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
+ struct plat_serial8250_port *p = serial_platform_data + i;
+
+ if (!(info->enabled_uarts & (1 << i))) {
+ p->flags = 0;
+ continue;
+ }
+
+ if (cpu_is_davinci_dm646x())
+ p->iotype = UPIO_MEM32;
+
+ if (cpu_is_davinci_dm355()) {
+ if (i == 2) {
+ p->mapbase = (unsigned long)DM355_UART2_BASE;
+ p->irq = IRQ_DM355_UARTINT2;
+ }
+ }
+
+ sprintf(name, "uart%d", i);
+ uart_clk = clk_get(dev, name);
+ if (IS_ERR(uart_clk))
+ printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ else {
+ clk_enable(uart_clk);
+ p->uartclk = clk_get_rate(uart_clk);
+ davinci_serial_reset(p);
+ }
+ }
}
static int __init davinci_init(void)
{
- davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 6c227d4ba998..494e01bff5c3 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -16,6 +16,9 @@
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
@@ -24,8 +27,11 @@
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
+#include <mach/cputype.h>
+#include "clock.h"
static struct clock_event_device clockevent_davinci;
+static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
@@ -99,9 +105,9 @@ struct timer_s {
unsigned int id;
unsigned long period;
unsigned long opts;
- unsigned long reg_base;
- unsigned long tim_reg;
- unsigned long prd_reg;
+ void __iomem *base;
+ unsigned long tim_off;
+ unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
@@ -114,15 +120,15 @@ static struct timer_s timers[];
static int timer32_config(struct timer_s *t)
{
- u32 tcr = davinci_readl(t->reg_base + TCR);
+ u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
- davinci_writel(0, t->tim_reg);
- davinci_writel(t->period, t->prd_reg);
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
@@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t)
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
- return davinci_readl(t->tim_reg);
+ return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -176,51 +182,54 @@ static struct timer_s timers[] = {
static void __init timer_init(void)
{
- u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
- u32 tgcr, base = bases[i];
+ u32 tgcr;
+ void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
+ u32 phys_base;
if (t->name) {
t->id = i;
- t->reg_base = (IS_TIMER1(t->id) ?
+ phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+ t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
- t->tim_reg = t->reg_base + TIM12;
- t->prd_reg = t->reg_base + PRD12;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
- t->tim_reg = t->reg_base + TIM34;
- t->prd_reg = t->reg_base + PRD34;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
}
/* Register interrupt */
@@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- t->period = CLOCK_TICK_RATE / (HZ);
+ t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
@@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = {
static void __init davinci_timer_init(void)
{
+ struct clk *timer_clk;
+
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
+ timer_clk = clk_get(NULL, "timer0");
+ BUG_ON(IS_ERR(timer_clk));
+ clk_enable(timer_clk);
+
+ davinci_clock_tick_rate = clk_get_rate(timer_clk);
+
/* setup clocksource */
clocksource_davinci.mult =
- clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
- clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
@@ -333,42 +350,52 @@ struct sys_timer davinci_timer = {
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
- u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+ u32 tgcr, wdtcr;
+ void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+ struct device dev;
+ struct clk *wd_clk;
+ char *name = "watchdog";
+
+ dev_set_name(&dev, name);
+ wd_clk = clk_get(&dev, NULL);
+ if (WARN_ON(IS_ERR(wd_clk)))
+ return;
+ clk_enable(wd_clk);
/* disable, internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
- davinci_writel(0, base + PRD12);
- davinci_writel(0, base + PRD34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
+ __raw_writel(0, base + PRD12);
+ __raw_writel(0, base + PRD34);
/* enable */
- wdtcr = davinci_readl(base + WDTCR);
+ wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 2429b79f6da2..abedb6337182 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -14,6 +14,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 44d4a966bed9..46098f546824 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -26,19 +26,13 @@
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
static int mmc_late_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+ int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return ret;
@@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev)
return ret;
}
-static void mmc_shutdown(struct device *dev)
+static void mmc_cleanup(struct device *dev)
{
gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
}
@@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev)
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
- .shutdown = mmc_shutdown,
+ .cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 0d8a3c195e2e..5e8877ce35e0 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -26,11 +26,7 @@
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4695965114c4..f597968733b4 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -39,12 +39,10 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
-#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
@@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = {
.resource = h3_kp_resources,
};
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x26))) {
- printk(KERN_ERR "Error reading from I/O EXPANDER \n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDA */
- if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x03;
-
- if (mode & IR_SIRMODE) {
- expa |= 0x01;
- } else { /* MIR/FIR */
- expa |= 0x03;
- }
-
- if ((err = write_gpio_expa(expa, 0x27)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h3_transceiver_mode,
- .select_irda = h3_select_irda,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
-};
-
-static struct resource h3_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
- .name = "omapirda",
- .id = 0,
- .dev = {
- .platform_data = &h3_irda_data,
- .dma_mask = &irda_dmamask,
- },
- .num_resources = ARRAY_SIZE(h3_irda_resources),
- .resource = h3_irda_resources,
-};
-
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
@@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = {
&nand_device,
&smc91x_device,
&intlat_device,
- &h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7bc7a3cb9c51..d1ed1365319e 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
- else
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
-
+ gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
return 0;
}
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index d040c3f1027f..a2d7814896be 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id)
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (dsp_use++ == 0) {
- api_clk = clk_get(NULL, "api_clk");
- dsp_clk = clk_get(NULL, "dsp_clk");
+ api_clk = clk_get(NULL, "api_ck");
+ dsp_clk = clk_get(NULL, "dsp_ck");
if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
clk_enable(api_clk);
clk_enable(dsp_clk);
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a0267a9ab466..e7d017cdc438 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -33,10 +33,8 @@
#include <mach/control.h>
#include <mach/gpio.h>
-#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
-#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
@@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
-/* Select between the IrDA and aGPS module
- */
-static int h4_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x21))) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDa */
- if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x01;
-
- if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
- expa |= 0x01;
- }
-
- if ((err = write_gpio_expa(expa, 0x20)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h4_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h4_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h4_transceiver_mode,
- .select_irda = h4_select_irda,
- .rx_channel = OMAP24XX_DMA_UART3_RX,
- .tx_channel = OMAP24XX_DMA_UART3_TX,
- .dest_start = OMAP_UART3_BASE,
- .src_start = OMAP_UART3_BASE,
- .tx_trigger = OMAP24XX_DMA_UART3_TX,
- .rx_trigger = OMAP24XX_DMA_UART3_RX,
-};
-
-static struct resource h4_irda_resources[] = {
- [0] = {
- .start = INT_24XX_UART3_IRQ,
- .end = INT_24XX_UART3_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h4_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &h4_irda_data,
- },
- .num_resources = 1,
- .resource = h4_irda_resources,
-};
-
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
@@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = {
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
- &h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 744740ae1b9c..3a7a29d1f9a7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,6 +42,7 @@
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include <mach/timer-gp.h>
#include "mmc-twl4030.h"
@@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 3a0daac6c839..374ff63c3eb2 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 1e839c5a28c5..efc59c49341b 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -60,12 +60,13 @@ struct omap_clk {
}, \
}
-#define CK_243X (1 << 0)
-#define CK_242X (1 << 1)
+#define CK_243X RATE_IN_243X
+#define CK_242X RATE_IN_242X
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
@@ -711,7 +712,7 @@ int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate, cpu_mask;
+ u32 clkrate;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
@@ -720,21 +721,15 @@ int __init omap2_clk_init(void)
clk_init(&omap2_clk_functions);
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
-
- cpu_mask = 0;
- if (cpu_is_omap2420())
- cpu_mask |= CK_242X;
- if (cpu_is_omap2430())
- cpu_mask |= CK_243X;
-
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 33c3e5b14323..88c5acb40fcf 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -625,6 +625,14 @@ static struct clk func_32k_ck = {
.clkdm_name = "wkup_clkdm",
};
+static struct clk secure_32k_ck = {
+ .name = "secure_32k_ck",
+ .ops = &clkops_null,
+ .rate = 32768,
+ .flags = RATE_FIXED,
+ .clkdm_name = "wkup_clkdm",
+};
+
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
@@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = {
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
+ .parent = &secure_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 70ec10deb654..6763b8f73028 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2052,7 +2052,7 @@ static struct clk dss_ick = {
static struct clk cam_mclk = {
.name = "cam_mclk",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
@@ -2063,7 +2063,7 @@ static struct clk cam_mclk = {
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
@@ -2074,7 +2074,7 @@ static struct clk cam_ick = {
static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
@@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = {
/* SECURE_32K_FCK clocks */
-/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d6b4b2f8722f..496983ade97e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -25,7 +25,6 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-#include <mach/eac.h>
#include <mach/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
@@ -366,38 +365,6 @@ static void omap_init_mcspi(void)
static inline void omap_init_mcspi(void) {}
#endif
-#ifdef CONFIG_SND_OMAP24XX_EAC
-
-#define OMAP2_EAC_BASE 0x48090000
-
-static struct resource omap2_eac_resources[] = {
- {
- .start = OMAP2_EAC_BASE,
- .end = OMAP2_EAC_BASE + 0x109,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap2_eac_device = {
- .name = "omap24xx-eac",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap2_eac_resources),
- .resource = omap2_eac_resources,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-void omap_init_eac(struct eac_platform_data *pdata)
-{
- omap2_eac_device.dev.platform_data = pdata;
- platform_device_register(&omap2_eac_device);
-}
-
-#else
-void omap_init_eac(struct eac_platform_data *pdata) {}
-#endif
-
#ifdef CONFIG_OMAP_SHA1_MD5
static struct resource sha1_md5_resources[] = {
{
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ba20d985dda..998c5c45587e 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq)
u32 sir, spurious;
sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
- spurious = sir >> 6;
+ spurious = sir >> 7;
- if (spurious > 1) {
+ if (spurious) {
printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
"posted write for irq %i\n",
irq, sir, previous_irq);
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 1cb2c0909c2b..f36aba12090e 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,8 @@
*
* OMAP2 GP timer support.
*
+ * Copyright (C) 2009 Nokia Corporation
+ *
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
@@ -36,8 +38,13 @@
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID 12
+
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
+static u8 __initdata gptimer_id = 1;
+static u8 __initdata inited;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
@@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = {
.set_mode = omap2_gp_timer_set_mode,
};
+/**
+ * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
+ * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
+ *
+ * Define the GPTIMER that the system should use for the tick timer.
+ * Meant to be called from board-*.c files in the event that GPTIMER1, the
+ * default, is unsuitable. Returns -EINVAL on error or 0 on success.
+ */
+int __init omap2_gp_clockevent_set_gptimer(u8 id)
+{
+ if (id < 1 || id > MAX_GPTIMER_ID)
+ return -EINVAL;
+
+ BUG_ON(inited);
+
+ gptimer_id = id;
+
+ return 0;
+}
+
static void __init omap2_gp_clockevent_init(void)
{
u32 tick_rate;
+ int src;
+
+ inited = 1;
- gptimer = omap_dm_timer_request_specific(1);
+ gptimer = omap_dm_timer_request_specific(gptimer_id);
BUG_ON(gptimer == NULL);
#if defined(CONFIG_OMAP_32K_TIMER)
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ src = OMAP_TIMER_SRC_32_KHZ;
#else
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ src = OMAP_TIMER_SRC_SYS_CLK;
+ WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
+ "secure 32KiHz clock source\n");
#endif
+
+ if (gptimer_id != 12)
+ WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
+ "timer-gp: omap_dm_timer_set_source() failed\n");
+
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
+ gptimer_id, tick_rate);
+
omap2_gp_timer_irq.dev_id = (void *)gptimer;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
@@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void)
clockevents_register_device(&clockevent_gpt);
}
+/* Clocksource code */
+
#ifdef CONFIG_OMAP_32K_TIMER
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 15e509013def..8df55f40f4c0 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
unsigned sysclk_ps;
int status;
- if (!refclk_psec)
+ if (!refclk_psec || sysclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e66d9099eab..17d3fbd368a3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -289,12 +289,12 @@ config MACH_LITTLETON
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index cdf21dd135b4..930e364ccde9 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = {
.num_chipselect = 3,
};
+static void corgi_wait_for_hsync(void)
+{
+ while (gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
+ .wait_for_sync = corgi_wait_for_hsync,
};
static void corgi_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e13f6a81c223..c872b9feb4d4 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = {
},
};
+static struct da9034_touch_pdata littleton_da9034_touch = {
+ .x_inverted = 1,
+ .interval_ms = 20,
+};
+
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
@@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = {
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ }, {
+ .name = "da9034-touch",
+ .id = DA9034_ID_TOUCH,
+ .platform_data = &littleton_da9034_touch,
},
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 8c61ddac119e..c18e34acafcb 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = {
.num_chipselect = 3,
};
+static void spitz_wait_for_hsync(void)
+{
+ while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = SPITZ_GPIO_TP_INT,
+ .wait_for_sync = spitz_wait_for_hsync,
};
static void spitz_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c1f73205d078..c256c57642c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO25_AC97_SDATA_IN_0,
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO91_SSP3_SCLK,
@@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* GPIO */
+ GPIO18_GPIO, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 4e1c488c6906..cc5a22833605 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO89_SSP3_SCLK,
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index c9cfe40e21f6..a7417c479ffe 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
+ flush_cache_all();
+
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index baf1c0f1ea5a..8199972ed5bd 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -40,6 +40,8 @@
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 0cd52692d2f7..1f940df0e5af 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -9,6 +9,7 @@
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 2c6c2a7c05a0..8f5c13f4c936 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -20,6 +20,31 @@
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
+#ifdef CONFIG_ARM_ERRATA_411920
+/*
+ * Invalidate the entire I cache (this code is a workaround for the ARM1136
+ * erratum 411920 - Invalidate Instruction Cache operation can fail. This
+ * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *
+ * Registers:
+ * r0 - set to 0
+ * r1 - corrupted
+ */
+ENTRY(v6_icache_inval_all)
+ mov r0, #0
+ mrs r1, cpsr
+ cpsid ifa @ disable interrupts
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ msr cpsr_cx, r1 @ restore interrupts
+ .rept 11 @ ARM Ltd recommends at least
+ nop @ 11 NOPs
+ .endr
+ mov pc, lr
+#endif
+
/*
* v6_flush_cache_all()
*
@@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all)
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
#else
+ b v6_icache_inval_all
+#endif
+#else
mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
#endif
mov pc, lr
@@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range)
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
#else
+ b v6_icache_inval_all
+#endif
+#else
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
mov pc, lr
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 4e283481cee1..c07222eb5ce0 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -18,6 +18,10 @@
#include "mm.h"
+#ifdef CONFIG_ARM_ERRATA_411920
+extern void v6_icache_inval_all(void);
+#endif
+
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
@@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcr p15, 0, %2, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %2, c7, c5, 0\n"
+#endif
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
void flush_cache_mm(struct mm_struct *mm)
@@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm)
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
@@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c221e26ac1d3..3397f1e64d76 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -96,6 +96,9 @@ ENTRY(cpu_v7_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_FLAGS
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
@@ -181,6 +184,22 @@ __v7_setup:
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+#ifdef CONFIG_ARM_ERRATA_430973
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 6) @ set IBE to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_458693
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 5) @ set L1NEON to 1
+ orr r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_460075
+ mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+#endif
mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index e364a5ed10f1..77646436c00e 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
local_irq_restore(flags);
return -EBUSY;
}
+ memset(imxdma, 0, sizeof(imxdma));
+ imxdma->name = name;
+ local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
- local_irq_restore(flags);
+ imxdma->name = NULL;
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
imxdma->watchdog.data = channel;
#endif
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
-
- local_irq_restore(flags);
return ret;
}
EXPORT_SYMBOL(imx_dma_request);
@@ -737,10 +733,7 @@ void imx_dma_free(int channel)
local_irq_save(flags);
/* Disable interrupts */
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
- DMA_BASE + DMA_CCR(channel));
+ imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index c6483bad8a26..89e95798cc3b 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
- BUG_ON(!irq_stat);
+
mxc_gpio_irq_handler(port, irq_stat);
}
#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 1cac9d1135cd..d42f4e6116f8 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -47,7 +47,7 @@
/*
* Base address of PBC controller, CS4
*/
-#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2e0614552ac8..29efc279287a 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -239,6 +239,13 @@ void recalculate_root_clocks(void)
}
}
+/**
+ * clk_init_one - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
void clk_init_one(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 21cc0142b97a..7fc8c045ad5d 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -760,19 +760,12 @@ void omap_free_dma(int lch)
{
unsigned long flags;
- spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
- dma_chan[lch].dev_id = -1;
- dma_chan[lch].next_lch = -1;
- dma_chan[lch].callback = NULL;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
@@ -798,6 +791,12 @@ void omap_free_dma(int lch)
dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
}
EXPORT_SYMBOL(omap_free_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index bfd47570cc91..55bb99631292 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 },
+ { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
};
static const char *omap3_dm_source_names[] __initdata = {
@@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
/*
- * Enable wake-up only for GPT1 on OMAP2 CPUs.
- * FIXME: All timers should have wake-up enabled and clear
- * PRCM status.
+ * Enable wake-up on OMAP2 CPUs.
*/
- if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
+ if (cpu_class_is_omap2())
l |= 1 << 2;
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
@@ -511,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
#ifdef CONFIG_ARCH_OMAP1
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;
u32 l;
@@ -519,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret = -EINVAL;
+
if (source < 0 || source >= 3)
- return;
+ return -EINVAL;
clk_disable(timer->fclk);
- clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
clk_enable(timer->fclk);
- /* When the functional clock disappears, too quick writes seem to
- * cause an abort. */
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
__delay(150000);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d3fa41e3d8c5..17d7afe42b83 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
if (cpu_is_omap24xx() || cpu_is_omap34xx())
- __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
+ __raw_writel(gpio_mask, reg);
+
+ /* Flush posted write for the irq status to avoid spurious interrupts */
+ __raw_readl(reg);
#endif
}
@@ -921,13 +925,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
case METHOD_MPUIO:
case METHOD_GPIO_1610:
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
@@ -940,13 +941,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
return -EINVAL;
}
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
index 6dc703138210..20f1054c0a80 100644
--- a/arch/arm/plat-omap/include/mach/dmtimer.h
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer);
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
deleted file mode 100644
index 9e62cf030270..000000000000
--- a/arch/arm/plat-omap/include/mach/eac.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK 0x100
-enum eac_mclk_src {
- EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
- EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
- EAC_MCLK_EXT_12288000,
- EAC_MCLK_EXT_2x11289600,
- EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
- EAC_CODEC_PCM,
- EAC_CODEC_AC97,
- EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
- EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
- /* if enabled, then first data slot (left channel) is signaled as
- * positive level of frame sync EAC.AC_FS */
- unsigned polarity_changed_mode:1;
- /* if enabled, then serial data starts one clock cycle after the
- * of EAC.AC_FS for first audio slot */
- unsigned sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
- enum eac_mclk_src mclk_src;
-
- enum eac_codec_mode codec_mode;
- union {
- struct eac_i2s_conf i2s;
- } codec_conf;
-
- int default_rate; /* audio sampling rate */
-
- int (* set_power)(void *private_data, int dac, int adc);
- int (* register_controls)(void *private_data,
- struct snd_card *card);
- const char *short_name;
-
- void *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
- int (* init)(struct device *eac_dev);
- void (* cleanup)(struct device *eac_dev);
- /* these callbacks are used to configure & control external MCLK
- * source. NULL if not used */
- int (* enable_ext_clocks)(struct device *eac_dev);
- void (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
deleted file mode 100644
index 90444a0d6b1a..000000000000
--- a/arch/arm/plat-omap/include/mach/gpioexpander.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
- return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
index 8372a00d8e0b..40f60339d1c6 100644
--- a/arch/arm/plat-omap/include/mach/irda.h
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -21,10 +21,6 @@ struct omap_irda_config {
int transceiver_cap;
int (*transceiver_mode)(struct device *dev, int mode);
int (*select_irda)(struct device *dev, int state);
- /* Very specific to the needs of some platforms (h3,h4)
- * having calls which can sleep in irda_set_speed.
- */
- struct delayed_work gpio_expa;
int rx_channel;
int tx_channel;
unsigned long dest_start;
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 4435bd434e17..81d5b36534b3 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -79,7 +79,6 @@ struct omap_mmc_platform_data {
/* use the internal clock */
unsigned internal_clock:1;
- s16 power_pin;
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h
new file mode 100644
index 000000000000..c88d346b59d9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timer-gp.h
@@ -0,0 +1,17 @@
+/*
+ * OMAP2/3 GPTIMER support.headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+
+int __init omap2_gp_clockevent_set_gptimer(u8 id);
+
+#endif
+
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index af819bf21b63..abc79d44acaa 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end)
return -ENOMEM;
}
+ memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
+
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
@@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end)
return 0;
}
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct pxa_gpio_chip *c;
@@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
else
c->irq_edge_fall &= ~mask;
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
@@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq)
struct pxa_gpio_chip *c = gpio_to_chip(gpio);
c->irq_mask |= GPIO_bit(gpio);
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
}
static struct irq_chip pxa_muxed_gpio_chip = {
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 0b97e14f73f6..c21a3290d542 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -43,8 +43,6 @@ core-y += arch/avr32/mm/
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/
-CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
-
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
.PHONY: $(BOOT_TARGETS) install
diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h
new file mode 100644
index 000000000000..b7685015a8ba
--- /dev/null
+++ b/arch/ia64/include/asm/idle.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_IA64_IDLE_H
+#define _ASM_IA64_IDLE_H
+
+static inline void enter_idle(void) { }
+static inline void exit_idle(void) { }
+
+#endif /* _ASM_IA64_IDLE_H */
diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h
index 73248781fba8..b8370c8b6198 100644
--- a/arch/ia64/include/asm/xen/events.h
+++ b/arch/ia64/include/asm/xen/events.h
@@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
return !(ia64_psr(regs)->i);
}
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+static inline void handle_irq(int irq, struct pt_regs *regs)
{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- irq_enter();
__do_IRQ(irq);
- irq_exit();
- set_irq_regs(old_regs);
}
#define irq_ctx_init(cpu) do { } while (0)
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
index 28fed1fcc079..aff8346ea193 100644
--- a/arch/ia64/xen/xensetup.S
+++ b/arch/ia64/xen/xensetup.S
@@ -54,8 +54,6 @@ END(startup_xen)
#define isBP p3 // are we the Bootstrap Processor?
- .text
-
GLOBAL_ENTRY(xen_setup_hook)
mov r8=XEN_PV_DOMAIN_ASM
(isBP) movl r9=xen_domain_type;;
diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile
index d908e1d3c07f..560484ae35ec 100644
--- a/arch/m32r/boot/compressed/Makefile
+++ b/arch/m32r/boot/compressed/Makefile
@@ -6,7 +6,6 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
piggy.o vmlinux.lds
-EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h
index 26351539b5ff..728799fc70aa 100644
--- a/arch/m32r/include/asm/assembler.h
+++ b/arch/m32r/include/asm/assembler.h
@@ -9,14 +9,15 @@
* This file contains M32R architecture specific macro definitions.
*/
+#include <linux/stringify.h>
+
+#undef __STR
-#ifndef __STR
#ifdef __ASSEMBLY__
#define __STR(x) x
#else
-#define __STR(x) #x
+#define __STR(x) __stringify(x)
#endif
-#endif /* __STR */
#ifdef CONFIG_SMP
#define M32R_LOCK __STR(lock)
diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile
index 09200d4886e3..b1a4b6036591 100644
--- a/arch/m32r/kernel/Makefile
+++ b/arch/m32r/kernel/Makefile
@@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_MODULES) += module.o
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h
index 187c0eedaece..37491276c6ca 100644
--- a/arch/microblaze/include/asm/of_platform.h
+++ b/arch/microblaze/include/asm/of_platform.h
@@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = {
{},
};
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c7804551362..a0d1146a0578 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION
default y if PMAC_APM_EMU
bool
+config DTC
+ bool
+ default y
+
config DEFAULT_UIMAGE
bool
help
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4458abb67c51..8da2bf963b57 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y)
BOOTCFLAGS += -fno-stack-protector
endif
-BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
+BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
DTS_FLAGS ?= -p 1024
@@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
-src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ $(addprefix $(obj)/,$(libfdtheader))
+
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
- $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
+ $(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
@@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
+quiet_cmd_copy_libfdt = COPY $@
+ cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,copy_libfdt)
+
$(obj)/empty.c:
@touch $@
@@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+ $(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
@@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+ $(call if_changed_dep,bootcc)
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,bootcc)
@@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote addRamDisk hack-coff mktree dtc
+hostprogs-y := addnote addRamDisk hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -133,47 +147,10 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
dtstree := $(srctree)/$(src)/dts
wrapper :=$(srctree)/$(src)/wrapper
-wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
+wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper) FORCE
#############
-# Bits for building dtc
-# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
-
-dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
-dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
-dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
-
-# prerequisites on generated files needs to be explicit
-$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
-$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
-
-HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
-
-targets += dtc-src/dtc-parser.tab.c
-targets += dtc-src/dtc-lexer.lex.c
-
-clean-files += dtc-src/dtc-parser.tab.h
-
-ifdef DTC_GENPARSER
-BISON = bison
-FLEX = flex
-
-quiet_cmd_bison = BISON $@
- cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
-quiet_cmd_flex = FLEX $@
- cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
-
-$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
- $(call if_changed,bison)
-
-$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
-
-$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
- $(call if_changed,flex)
-endif
-
-#############
# Bits for building various flavours of zImage
ifneq ($(CROSS32_COMPILE),)
@@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
# Rule to build device tree blobs
-$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
- $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+DTC = $(objtree)/scripts/dtc/dtc
+
+$(obj)/%.dtb: $(dtstree)/%.dts
+ $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc
deleted file mode 100644
index 6ddf9ecac669..000000000000
--- a/arch/powerpc/boot/dtc-src/Makefile.dtc
+++ /dev/null
@@ -1,9 +0,0 @@
-# Makefile.dtc
-#
-# This is not a complete Makefile of itself. Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
- checks.c
-DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
-DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c
deleted file mode 100644
index 95485796f253..000000000000
--- a/arch/powerpc/boot/dtc-src/checks.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-#ifdef TRACE_CHECKS
-#define TRACE(c, ...) \
- do { \
- fprintf(stderr, "=== %s: ", (c)->name); \
- fprintf(stderr, __VA_ARGS__); \
- fprintf(stderr, "\n"); \
- } while (0)
-#else
-#define TRACE(c, fmt, ...) do { } while (0)
-#endif
-
-enum checklevel {
- IGNORE = 0,
- WARN = 1,
- ERROR = 2,
-};
-
-enum checkstatus {
- UNCHECKED = 0,
- PREREQ,
- PASSED,
- FAILED,
-};
-
-struct check;
-
-typedef void (*tree_check_fn)(struct check *c, struct node *dt);
-typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node);
-typedef void (*prop_check_fn)(struct check *c, struct node *dt,
- struct node *node, struct property *prop);
-
-struct check {
- const char *name;
- tree_check_fn tree_fn;
- node_check_fn node_fn;
- prop_check_fn prop_fn;
- void *data;
- enum checklevel level;
- enum checkstatus status;
- int inprogress;
- int num_prereqs;
- struct check **prereq;
-};
-
-#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \
- static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \
- static struct check nm = { \
- .name = #nm, \
- .tree_fn = (tfn), \
- .node_fn = (nfn), \
- .prop_fn = (pfn), \
- .data = (d), \
- .level = (lvl), \
- .status = UNCHECKED, \
- .num_prereqs = ARRAY_SIZE(nm##_prereqs), \
- .prereq = nm##_prereqs, \
- };
-
-#define TREE_CHECK(nm, d, lvl, ...) \
- CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__)
-#define NODE_CHECK(nm, d, lvl, ...) \
- CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__)
-#define PROP_CHECK(nm, d, lvl, ...) \
- CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__)
-#define BATCH_CHECK(nm, lvl, ...) \
- CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__)
-
-#ifdef __GNUC__
-static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
-#endif
-static inline void check_msg(struct check *c, const char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
-
- if ((c->level < WARN) || (c->level <= quiet))
- return; /* Suppress message */
-
- fprintf(stderr, "%s (%s): ",
- (c->level == ERROR) ? "ERROR" : "Warning", c->name);
- vfprintf(stderr, fmt, ap);
- fprintf(stderr, "\n");
-}
-
-#define FAIL(c, ...) \
- do { \
- TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
- (c)->status = FAILED; \
- check_msg((c), __VA_ARGS__); \
- } while (0)
-
-static void check_nodes_props(struct check *c, struct node *dt, struct node *node)
-{
- struct node *child;
- struct property *prop;
-
- TRACE(c, "%s", node->fullpath);
- if (c->node_fn)
- c->node_fn(c, dt, node);
-
- if (c->prop_fn)
- for_each_property(node, prop) {
- TRACE(c, "%s\t'%s'", node->fullpath, prop->name);
- c->prop_fn(c, dt, node, prop);
- }
-
- for_each_child(node, child)
- check_nodes_props(c, dt, child);
-}
-
-static int run_check(struct check *c, struct node *dt)
-{
- int error = 0;
- int i;
-
- assert(!c->inprogress);
-
- if (c->status != UNCHECKED)
- goto out;
-
- c->inprogress = 1;
-
- for (i = 0; i < c->num_prereqs; i++) {
- struct check *prq = c->prereq[i];
- error |= run_check(prq, dt);
- if (prq->status != PASSED) {
- c->status = PREREQ;
- check_msg(c, "Failed prerequisite '%s'",
- c->prereq[i]->name);
- }
- }
-
- if (c->status != UNCHECKED)
- goto out;
-
- if (c->node_fn || c->prop_fn)
- check_nodes_props(c, dt, dt);
-
- if (c->tree_fn)
- c->tree_fn(c, dt);
- if (c->status == UNCHECKED)
- c->status = PASSED;
-
- TRACE(c, "\tCompleted, status %d", c->status);
-
-out:
- c->inprogress = 0;
- if ((c->status != PASSED) && (c->level == ERROR))
- error = 1;
- return error;
-}
-
-/*
- * Utility check functions
- */
-
-static void check_is_string(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- char *propname = c->data;
-
- prop = get_property(node, propname);
- if (!prop)
- return; /* Not present, assumed ok */
-
- if (!data_is_one_string(prop->val))
- FAIL(c, "\"%s\" property in %s is not a string",
- propname, node->fullpath);
-}
-#define CHECK_IS_STRING(nm, propname, lvl) \
- CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl))
-
-static void check_is_cell(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- char *propname = c->data;
-
- prop = get_property(node, propname);
- if (!prop)
- return; /* Not present, assumed ok */
-
- if (prop->val.len != sizeof(cell_t))
- FAIL(c, "\"%s\" property in %s is not a single cell",
- propname, node->fullpath);
-}
-#define CHECK_IS_CELL(nm, propname, lvl) \
- CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl))
-
-/*
- * Structural check functions
- */
-
-static void check_duplicate_node_names(struct check *c, struct node *dt,
- struct node *node)
-{
- struct node *child, *child2;
-
- for_each_child(node, child)
- for (child2 = child->next_sibling;
- child2;
- child2 = child2->next_sibling)
- if (streq(child->name, child2->name))
- FAIL(c, "Duplicate node name %s",
- child->fullpath);
-}
-NODE_CHECK(duplicate_node_names, NULL, ERROR);
-
-static void check_duplicate_property_names(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop, *prop2;
-
- for_each_property(node, prop)
- for (prop2 = prop->next; prop2; prop2 = prop2->next)
- if (streq(prop->name, prop2->name))
- FAIL(c, "Duplicate property name %s in %s",
- prop->name, node->fullpath);
-}
-NODE_CHECK(duplicate_property_names, NULL, ERROR);
-
-#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
-#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-#define DIGITS "0123456789"
-#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
-
-static void check_node_name_chars(struct check *c, struct node *dt,
- struct node *node)
-{
- int n = strspn(node->name, c->data);
-
- if (n < strlen(node->name))
- FAIL(c, "Bad character '%c' in node %s",
- node->name[n], node->fullpath);
-}
-NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
-
-static void check_node_name_format(struct check *c, struct node *dt,
- struct node *node)
-{
- if (strchr(get_unitname(node), '@'))
- FAIL(c, "Node %s has multiple '@' characters in name",
- node->fullpath);
-}
-NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
-
-static void check_property_name_chars(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- int n = strspn(prop->name, c->data);
-
- if (n < strlen(prop->name))
- FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
- prop->name[n], prop->name, node->fullpath);
-}
-PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
-
-static void check_explicit_phandles(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- struct node *other;
- cell_t phandle;
-
- prop = get_property(node, "linux,phandle");
- if (! prop)
- return; /* No phandle, that's fine */
-
- if (prop->val.len != sizeof(cell_t)) {
- FAIL(c, "%s has bad length (%d) linux,phandle property",
- node->fullpath, prop->val.len);
- return;
- }
-
- phandle = propval_cell(prop);
- if ((phandle == 0) || (phandle == -1)) {
- FAIL(c, "%s has invalid linux,phandle value 0x%x",
- node->fullpath, phandle);
- return;
- }
-
- other = get_node_by_phandle(root, phandle);
- if (other) {
- FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
- node->fullpath, phandle, other->fullpath);
- return;
- }
-
- node->phandle = phandle;
-}
-NODE_CHECK(explicit_phandles, NULL, ERROR);
-
-static void check_name_properties(struct check *c, struct node *root,
- struct node *node)
-{
- struct property **pp, *prop = NULL;
-
- for (pp = &node->proplist; *pp; pp = &((*pp)->next))
- if (streq((*pp)->name, "name")) {
- prop = *pp;
- break;
- }
-
- if (!prop)
- return; /* No name property, that's fine */
-
- if ((prop->val.len != node->basenamelen+1)
- || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
- FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
- " of base node name)", node->fullpath, prop->val.val);
- } else {
- /* The name property is correct, and therefore redundant.
- * Delete it */
- *pp = prop->next;
- free(prop->name);
- data_free(prop->val);
- free(prop);
- }
-}
-CHECK_IS_STRING(name_is_string, "name", ERROR);
-NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
-
-/*
- * Reference fixup functions
- */
-
-static void fixup_phandle_references(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- cell_t phandle;
-
- for_each_marker_of_type(m, REF_PHANDLE) {
- assert(m->offset + sizeof(cell_t) <= prop->val.len);
-
- refnode = get_node_by_ref(dt, m->ref);
- if (! refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
-
- phandle = get_node_phandle(dt, refnode);
- *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
- }
-}
-CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
- &duplicate_node_names, &explicit_phandles);
-
-static void fixup_path_references(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- char *path;
-
- for_each_marker_of_type(m, REF_PATH) {
- assert(m->offset <= prop->val.len);
-
- refnode = get_node_by_ref(dt, m->ref);
- if (!refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
-
- path = refnode->fullpath;
- prop->val = data_insert_at_marker(prop->val, m, path,
- strlen(path) + 1);
- }
-}
-CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR,
- &duplicate_node_names);
-
-/*
- * Semantic checks
- */
-CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN);
-CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN);
-CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN);
-
-CHECK_IS_STRING(device_type_is_string, "device_type", WARN);
-CHECK_IS_STRING(model_is_string, "model", WARN);
-CHECK_IS_STRING(status_is_string, "status", WARN);
-
-static void fixup_addr_size_cells(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
-
- node->addr_cells = -1;
- node->size_cells = -1;
-
- prop = get_property(node, "#address-cells");
- if (prop)
- node->addr_cells = propval_cell(prop);
-
- prop = get_property(node, "#size-cells");
- if (prop)
- node->size_cells = propval_cell(prop);
-}
-CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN,
- &address_cells_is_cell, &size_cells_is_cell);
-
-#define node_addr_cells(n) \
- (((n)->addr_cells == -1) ? 2 : (n)->addr_cells)
-#define node_size_cells(n) \
- (((n)->size_cells == -1) ? 1 : (n)->size_cells)
-
-static void check_reg_format(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
- int addr_cells, size_cells, entrylen;
-
- prop = get_property(node, "reg");
- if (!prop)
- return; /* No "reg", that's fine */
-
- if (!node->parent) {
- FAIL(c, "Root node has a \"reg\" property");
- return;
- }
-
- if (prop->val.len == 0)
- FAIL(c, "\"reg\" property in %s is empty", node->fullpath);
-
- addr_cells = node_addr_cells(node->parent);
- size_cells = node_size_cells(node->parent);
- entrylen = (addr_cells + size_cells) * sizeof(cell_t);
-
- if ((prop->val.len % entrylen) != 0)
- FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) "
- "(#address-cells == %d, #size-cells == %d)",
- node->fullpath, prop->val.len, addr_cells, size_cells);
-}
-NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells);
-
-static void check_ranges_format(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
- int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
-
- prop = get_property(node, "ranges");
- if (!prop)
- return;
-
- if (!node->parent) {
- FAIL(c, "Root node has a \"ranges\" property");
- return;
- }
-
- p_addr_cells = node_addr_cells(node->parent);
- p_size_cells = node_size_cells(node->parent);
- c_addr_cells = node_addr_cells(node);
- c_size_cells = node_size_cells(node);
- entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t);
-
- if (prop->val.len == 0) {
- if (p_addr_cells != c_addr_cells)
- FAIL(c, "%s has empty \"ranges\" property but its "
- "#address-cells (%d) differs from %s (%d)",
- node->fullpath, c_addr_cells, node->parent->fullpath,
- p_addr_cells);
- if (p_size_cells != c_size_cells)
- FAIL(c, "%s has empty \"ranges\" property but its "
- "#size-cells (%d) differs from %s (%d)",
- node->fullpath, c_size_cells, node->parent->fullpath,
- p_size_cells);
- } else if ((prop->val.len % entrylen) != 0) {
- FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) "
- "(parent #address-cells == %d, child #address-cells == %d, "
- "#size-cells == %d)", node->fullpath, prop->val.len,
- p_addr_cells, c_addr_cells, c_size_cells);
- }
-}
-NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells);
-
-/*
- * Style checks
- */
-static void check_avoid_default_addr_size(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *reg, *ranges;
-
- if (!node->parent)
- return; /* Ignore root node */
-
- reg = get_property(node, "reg");
- ranges = get_property(node, "ranges");
-
- if (!reg && !ranges)
- return;
-
- if ((node->parent->addr_cells == -1))
- FAIL(c, "Relying on default #address-cells value for %s",
- node->fullpath);
-
- if ((node->parent->size_cells == -1))
- FAIL(c, "Relying on default #size-cells value for %s",
- node->fullpath);
-}
-NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells);
-
-static void check_obsolete_chosen_interrupt_controller(struct check *c,
- struct node *dt)
-{
- struct node *chosen;
- struct property *prop;
-
- chosen = get_node_by_path(dt, "/chosen");
- if (!chosen)
- return;
-
- prop = get_property(chosen, "interrupt-controller");
- if (prop)
- FAIL(c, "/chosen has obsolete \"interrupt-controller\" "
- "property");
-}
-TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
-
-static struct check *check_table[] = {
- &duplicate_node_names, &duplicate_property_names,
- &node_name_chars, &node_name_format, &property_name_chars,
- &name_is_string, &name_properties,
- &explicit_phandles,
- &phandle_references, &path_references,
-
- &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell,
- &device_type_is_string, &model_is_string, &status_is_string,
-
- &addr_size_cells, &reg_format, &ranges_format,
-
- &avoid_default_addr_size,
- &obsolete_chosen_interrupt_controller,
-};
-
-void process_checks(int force, struct boot_info *bi)
-{
- struct node *dt = bi->dt;
- int i;
- int error = 0;
-
- for (i = 0; i < ARRAY_SIZE(check_table); i++) {
- struct check *c = check_table[i];
-
- if (c->level != IGNORE)
- error = error || run_check(c, dt);
- }
-
- if (error) {
- if (!force) {
- fprintf(stderr, "ERROR: Input tree has errors, aborting "
- "(use -f to force output)\n");
- exit(2);
- } else if (quiet < 3) {
- fprintf(stderr, "Warning: Input tree has errors, "
- "output forced\n");
- }
- }
-}
diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c
deleted file mode 100644
index dd2e3d39d4c1..000000000000
--- a/arch/powerpc/boot/dtc-src/data.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-void data_free(struct data d)
-{
- struct marker *m, *nm;
-
- m = d.markers;
- while (m) {
- nm = m->next;
- free(m->ref);
- free(m);
- m = nm;
- }
-
- if (d.val)
- free(d.val);
-}
-
-struct data data_grow_for(struct data d, int xlen)
-{
- struct data nd;
- int newsize;
-
- if (xlen == 0)
- return d;
-
- nd = d;
-
- newsize = xlen;
-
- while ((d.len + xlen) > newsize)
- newsize *= 2;
-
- nd.val = xrealloc(d.val, newsize);
-
- return nd;
-}
-
-struct data data_copy_mem(const char *mem, int len)
-{
- struct data d;
-
- d = data_grow_for(empty_data, len);
-
- d.len = len;
- memcpy(d.val, mem, len);
-
- return d;
-}
-
-static char get_oct_char(const char *s, int *i)
-{
- char x[4];
- char *endx;
- long val;
-
- x[3] = '\0';
- strncpy(x, s + *i, 3);
-
- val = strtol(x, &endx, 8);
-
- assert(endx > x);
-
- (*i) += endx - x;
- return val;
-}
-
-static char get_hex_char(const char *s, int *i)
-{
- char x[3];
- char *endx;
- long val;
-
- x[2] = '\0';
- strncpy(x, s + *i, 2);
-
- val = strtol(x, &endx, 16);
- if (!(endx > x))
- die("\\x used with no following hex digits\n");
-
- (*i) += endx - x;
- return val;
-}
-
-struct data data_copy_escape_string(const char *s, int len)
-{
- int i = 0;
- struct data d;
- char *q;
-
- d = data_grow_for(empty_data, strlen(s)+1);
-
- q = d.val;
- while (i < len) {
- char c = s[i++];
-
- if (c != '\\') {
- q[d.len++] = c;
- continue;
- }
-
- c = s[i++];
- assert(c);
- switch (c) {
- case 'a':
- q[d.len++] = '\a';
- break;
- case 'b':
- q[d.len++] = '\b';
- break;
- case 't':
- q[d.len++] = '\t';
- break;
- case 'n':
- q[d.len++] = '\n';
- break;
- case 'v':
- q[d.len++] = '\v';
- break;
- case 'f':
- q[d.len++] = '\f';
- break;
- case 'r':
- q[d.len++] = '\r';
- break;
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- i--; /* need to re-read the first digit as
- * part of the octal value */
- q[d.len++] = get_oct_char(s, &i);
- break;
- case 'x':
- q[d.len++] = get_hex_char(s, &i);
- break;
- default:
- q[d.len++] = c;
- }
- }
-
- q[d.len++] = '\0';
- return d;
-}
-
-struct data data_copy_file(FILE *f, size_t maxlen)
-{
- struct data d = empty_data;
-
- while (!feof(f) && (d.len < maxlen)) {
- size_t chunksize, ret;
-
- if (maxlen == -1)
- chunksize = 4096;
- else
- chunksize = maxlen - d.len;
-
- d = data_grow_for(d, chunksize);
- ret = fread(d.val + d.len, 1, chunksize, f);
-
- if (ferror(f))
- die("Error reading file into data: %s", strerror(errno));
-
- if (d.len + ret < d.len)
- die("Overflow reading file into data\n");
-
- d.len += ret;
- }
-
- return d;
-}
-
-struct data data_append_data(struct data d, const void *p, int len)
-{
- d = data_grow_for(d, len);
- memcpy(d.val + d.len, p, len);
- d.len += len;
- return d;
-}
-
-struct data data_insert_at_marker(struct data d, struct marker *m,
- const void *p, int len)
-{
- d = data_grow_for(d, len);
- memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset);
- memcpy(d.val + m->offset, p, len);
- d.len += len;
-
- /* Adjust all markers after the one we're inserting at */
- m = m->next;
- for_each_marker(m)
- m->offset += len;
- return d;
-}
-
-struct data data_append_markers(struct data d, struct marker *m)
-{
- struct marker **mp = &d.markers;
-
- /* Find the end of the markerlist */
- while (*mp)
- mp = &((*mp)->next);
- *mp = m;
- return d;
-}
-
-struct data data_merge(struct data d1, struct data d2)
-{
- struct data d;
- struct marker *m2 = d2.markers;
-
- d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2);
-
- /* Adjust for the length of d1 */
- for_each_marker(m2)
- m2->offset += d1.len;
-
- d2.markers = NULL; /* So data_free() doesn't clobber them */
- data_free(d2);
-
- return d;
-}
-
-struct data data_append_cell(struct data d, cell_t word)
-{
- cell_t beword = cpu_to_fdt32(word);
-
- return data_append_data(d, &beword, sizeof(beword));
-}
-
-struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
-{
- struct fdt_reserve_entry bere;
-
- bere.address = cpu_to_fdt64(re->address);
- bere.size = cpu_to_fdt64(re->size);
-
- return data_append_data(d, &bere, sizeof(bere));
-}
-
-struct data data_append_addr(struct data d, uint64_t addr)
-{
- uint64_t beaddr = cpu_to_fdt64(addr);
-
- return data_append_data(d, &beaddr, sizeof(beaddr));
-}
-
-struct data data_append_byte(struct data d, uint8_t byte)
-{
- return data_append_data(d, &byte, 1);
-}
-
-struct data data_append_zeroes(struct data d, int len)
-{
- d = data_grow_for(d, len);
-
- memset(d.val + d.len, 0, len);
- d.len += len;
- return d;
-}
-
-struct data data_append_align(struct data d, int align)
-{
- int newlen = ALIGN(d.len, align);
- return data_append_zeroes(d, newlen - d.len);
-}
-
-struct data data_add_marker(struct data d, enum markertype type, char *ref)
-{
- struct marker *m;
-
- m = xmalloc(sizeof(*m));
- m->offset = d.len;
- m->type = type;
- m->ref = ref;
- m->next = NULL;
-
- return data_append_markers(d, m);
-}
-
-int data_is_one_string(struct data d)
-{
- int i;
- int len = d.len;
-
- if (len == 0)
- return 0;
-
- for (i = 0; i < len-1; i++)
- if (d.val[i] == '\0')
- return 0;
-
- if (d.val[len-1] != '\0')
- return 0;
-
- return 1;
-}
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l
deleted file mode 100644
index 44dbfd3f0976..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.l
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-%option noyywrap nounput yylineno
-
-%x INCLUDE
-%x BYTESTRING
-%x PROPNODENAME
-%s V1
-
-PROPNODECHAR [a-zA-Z0-9,._+*#?@-]
-PATHCHAR ({PROPNODECHAR}|[/])
-LABEL [a-zA-Z_][a-zA-Z0-9_]*
-STRING \"([^\\"]|\\.)*\"
-WS [[:space:]]
-COMMENT "/*"([^*]|\*+[^*/])*\*+"/"
-LINECOMMENT "//".*\n
-
-%{
-#include "dtc.h"
-#include "srcpos.h"
-#include "dtc-parser.tab.h"
-
-
-/*#define LEXDEBUG 1*/
-
-#ifdef LEXDEBUG
-#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
-#else
-#define DPRINT(fmt, ...) do { } while (0)
-#endif
-
-static int dts_version; /* = 0 */
-
-#define BEGIN_DEFAULT() if (dts_version == 0) { \
- DPRINT("<INITIAL>\n"); \
- BEGIN(INITIAL); \
- } else { \
- DPRINT("<V1>\n"); \
- BEGIN(V1); \
- }
-
-static void push_input_file(const char *filename);
-static int pop_input_file(void);
-%}
-
-%%
-<*>"/include/"{WS}*{STRING} {
- char *name = strchr(yytext, '\"') + 1;
- yytext[yyleng-1] = '\0';
- push_input_file(name);
- }
-
-<*><<EOF>> {
- if (!pop_input_file()) {
- yyterminate();
- }
- }
-
-<*>{STRING} {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("String: %s\n", yytext);
- yylval.data = data_copy_escape_string(yytext+1,
- yyleng-2);
- yylloc.first_line = yylineno;
- return DT_STRING;
- }
-
-<*>"/dts-v1/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /dts-v1/\n");
- dts_version = 1;
- BEGIN_DEFAULT();
- return DT_V1;
- }
-
-<*>"/memreserve/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /memreserve/\n");
- BEGIN_DEFAULT();
- return DT_MEMRESERVE;
- }
-
-<*>{LABEL}: {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Label: %s\n", yytext);
- yylval.labelref = strdup(yytext);
- yylval.labelref[yyleng-1] = '\0';
- return DT_LABEL;
- }
-
-<INITIAL>[bodh]# {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- if (*yytext == 'b')
- yylval.cbase = 2;
- else if (*yytext == 'o')
- yylval.cbase = 8;
- else if (*yytext == 'd')
- yylval.cbase = 10;
- else
- yylval.cbase = 16;
- DPRINT("Base: %d\n", yylval.cbase);
- return DT_BASE;
- }
-
-<INITIAL>[0-9a-fA-F]+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LEGACYLITERAL;
- }
-
-<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LITERAL;
- }
-
-\&{LABEL} { /* label reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
-
-"&{/"{PATHCHAR}+\} { /* new-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yytext[yyleng-1] = '\0';
- DPRINT("Ref: %s\n", yytext+2);
- yylval.labelref = strdup(yytext+2);
- return DT_REF;
- }
-
-<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
-
-<BYTESTRING>[0-9a-fA-F]{2} {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.byte = strtol(yytext, NULL, 16);
- DPRINT("Byte: %02x\n", (int)yylval.byte);
- return DT_BYTE;
- }
-
-<BYTESTRING>"]" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("/BYTESTRING\n");
- BEGIN_DEFAULT();
- return ']';
- }
-
-<PROPNODENAME>{PROPNODECHAR}+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("PropNodeName: %s\n", yytext);
- yylval.propnodename = strdup(yytext);
- BEGIN_DEFAULT();
- return DT_PROPNODENAME;
- }
-
-"/incbin/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Binary Include\n");
- return DT_INCBIN;
- }
-
-<*>{WS}+ /* eat whitespace */
-<*>{COMMENT}+ /* eat C-style comments */
-<*>{LINECOMMENT}+ /* eat C++-style comments */
-
-<*>. {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Char: %c (\\x%02x)\n", yytext[0],
- (unsigned)yytext[0]);
- if (yytext[0] == '[') {
- DPRINT("<BYTESTRING>\n");
- BEGIN(BYTESTRING);
- }
- if ((yytext[0] == '{')
- || (yytext[0] == ';')) {
- DPRINT("<PROPNODENAME>\n");
- BEGIN(PROPNODENAME);
- }
- return yytext[0];
- }
-
-%%
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
- struct dtc_file *file;
- YY_BUFFER_STATE yy_prev_buf;
- int yy_prev_lineno;
- struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH (100)
-
-static int incl_depth = 0;
-
-
-static void push_input_file(const char *filename)
-{
- struct incl_file *incl_file;
- struct dtc_file *newfile;
- struct search_path search, *searchptr = NULL;
-
- assert(filename);
-
- if (incl_depth++ >= MAX_INCLUDE_DEPTH)
- die("Includes nested too deeply");
-
- if (srcpos_file) {
- search.dir = srcpos_file->dir;
- search.next = NULL;
- search.prev = NULL;
- searchptr = &search;
- }
-
- newfile = dtc_open_file(filename, searchptr);
-
- incl_file = xmalloc(sizeof(struct incl_file));
-
- /*
- * Save current context.
- */
- incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
- incl_file->yy_prev_lineno = yylineno;
- incl_file->file = srcpos_file;
- incl_file->prev = incl_file_stack;
-
- incl_file_stack = incl_file;
-
- /*
- * Establish new context.
- */
- srcpos_file = newfile;
- yylineno = 1;
- yyin = newfile->file;
- yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
-}
-
-
-static int pop_input_file(void)
-{
- struct incl_file *incl_file;
-
- if (incl_file_stack == 0)
- return 0;
-
- dtc_close_file(srcpos_file);
-
- /*
- * Pop.
- */
- --incl_depth;
- incl_file = incl_file_stack;
- incl_file_stack = incl_file->prev;
-
- /*
- * Recover old context.
- */
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(incl_file->yy_prev_buf);
- yylineno = incl_file->yy_prev_lineno;
- srcpos_file = incl_file->file;
- yyin = incl_file->file ? incl_file->file->file : NULL;
-
- /*
- * Free old state.
- */
- free(incl_file);
-
- return 1;
-}
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
deleted file mode 100644
index ac392cb040f6..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
+++ /dev/null
@@ -1,2187 +0,0 @@
-#line 2 "dtc-lexer.lex.c"
-
-#line 4 "dtc-lexer.lex.c"
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 34
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart(yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#define YY_BUF_SIZE 16384
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-extern int yyleng;
-
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
- * access to the local variable yy_act. Since yyless() is a macro, it would break
- * existing scanners that call yyless() from OUTSIDE yylex.
- * One obvious solution it to make yy_act a global. I tried that, and saw
- * a 5% performance hit in a non-yylineno scanner, because yy_act is
- * normally declared as a register variable-- so it is not worth it.
- */
- #define YY_LESS_LINENO(n) \
- do { \
- int yyl;\
- for ( yyl = n; yyl < yyleng; ++yyl )\
- if ( yytext[yyl] == '\n' )\
- --yylineno;\
- }while(0)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up yytext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- * Given that the standard has decreed that size_t exists since 1989,
- * I guess we can afford to depend on it. Manoj.
- */
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via yyrestart()), so that the user can continue scanning by
- * just pointing yyin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart (FILE *input_file );
-void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
-void yy_delete_buffer (YY_BUFFER_STATE b );
-void yy_flush_buffer (YY_BUFFER_STATE b );
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
-void yypop_buffer_state (void );
-
-static void yyensure_buffer_stack (void );
-static void yy_load_buffer_state (void );
-static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
-
-void *yyalloc (yy_size_t );
-void *yyrealloc (void *,yy_size_t );
-void yyfree (void * );
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-#define yywrap(n) 1
-#define YY_SKIP_YYWRAP
-
-typedef unsigned char YY_CHAR;
-
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int yylineno;
-
-int yylineno = 1;
-
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- yyleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 20
-#define YY_END_OF_BUFFER 21
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_accept[104] =
- { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 21, 19, 16, 16, 19, 19, 19, 7, 7, 19,
- 7, 19, 19, 19, 19, 13, 14, 14, 19, 8,
- 8, 16, 0, 2, 0, 0, 9, 0, 0, 0,
- 0, 0, 0, 7, 7, 5, 0, 6, 0, 12,
- 12, 14, 14, 8, 0, 11, 9, 0, 0, 0,
- 0, 18, 0, 0, 0, 0, 8, 0, 17, 0,
- 0, 0, 0, 0, 10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 3, 15,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
-
- 0, 4, 0
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 2, 2, 2, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 2, 1, 4, 5, 1, 1, 6, 1, 1,
- 1, 7, 8, 8, 9, 8, 10, 11, 12, 13,
- 13, 13, 13, 13, 13, 13, 13, 14, 1, 1,
- 1, 1, 8, 8, 15, 15, 15, 15, 15, 15,
- 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
- 16, 16, 16, 16, 16, 16, 16, 17, 16, 16,
- 1, 18, 19, 1, 16, 1, 15, 20, 21, 22,
-
- 23, 15, 16, 24, 25, 16, 16, 26, 27, 28,
- 24, 16, 16, 29, 30, 31, 32, 33, 16, 17,
- 16, 16, 34, 1, 35, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst flex_int32_t yy_meta[36] =
- { 0,
- 1, 1, 1, 1, 2, 1, 2, 2, 2, 3,
- 4, 4, 4, 5, 6, 7, 7, 1, 1, 6,
- 6, 6, 6, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 8, 1
- } ;
-
-static yyconst flex_int16_t yy_base[117] =
- { 0,
- 0, 0, 30, 0, 44, 0, 67, 0, 97, 105,
- 302, 303, 35, 44, 40, 94, 112, 0, 129, 152,
- 296, 295, 159, 0, 176, 303, 0, 116, 95, 165,
- 49, 46, 102, 303, 296, 0, 0, 288, 290, 293,
- 264, 266, 270, 0, 0, 303, 0, 303, 264, 303,
- 0, 0, 195, 101, 0, 0, 0, 0, 284, 125,
- 277, 265, 225, 230, 216, 218, 0, 202, 224, 221,
- 217, 107, 196, 188, 303, 206, 179, 186, 178, 185,
- 183, 162, 161, 150, 169, 160, 145, 125, 303, 303,
- 137, 109, 190, 103, 203, 167, 108, 197, 303, 123,
-
- 29, 303, 303, 215, 221, 226, 229, 234, 240, 246,
- 250, 257, 265, 270, 275, 282
- } ;
-
-static yyconst flex_int16_t yy_def[117] =
- { 0,
- 103, 1, 1, 3, 3, 5, 103, 7, 3, 3,
- 103, 103, 103, 103, 104, 105, 103, 106, 103, 19,
- 19, 20, 103, 107, 20, 103, 108, 109, 105, 103,
- 103, 103, 104, 103, 104, 110, 111, 103, 112, 113,
- 103, 103, 103, 106, 19, 103, 20, 103, 103, 103,
- 20, 108, 109, 103, 114, 110, 111, 115, 112, 112,
- 113, 103, 103, 103, 103, 103, 114, 115, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 116, 103, 116, 103, 116,
-
- 103, 103, 0, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103
- } ;
-
-static yyconst flex_int16_t yy_nxt[339] =
- { 0,
- 12, 13, 14, 15, 12, 16, 12, 12, 12, 17,
- 18, 18, 18, 12, 19, 20, 20, 12, 12, 21,
- 19, 21, 19, 22, 20, 20, 20, 20, 20, 20,
- 20, 20, 20, 12, 12, 12, 32, 32, 102, 23,
- 12, 12, 12, 34, 20, 32, 32, 32, 32, 20,
- 20, 20, 20, 20, 24, 24, 24, 35, 25, 54,
- 54, 54, 26, 25, 25, 25, 25, 12, 13, 14,
- 15, 27, 12, 27, 27, 27, 23, 27, 27, 27,
- 12, 28, 28, 28, 12, 12, 28, 28, 28, 28,
- 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-
- 12, 12, 29, 36, 103, 34, 17, 30, 31, 31,
- 29, 54, 54, 54, 17, 30, 31, 31, 39, 35,
- 52, 40, 52, 52, 52, 103, 78, 38, 38, 46,
- 101, 60, 79, 41, 69, 97, 42, 94, 43, 45,
- 45, 45, 46, 45, 47, 47, 93, 92, 45, 45,
- 45, 45, 47, 47, 47, 47, 47, 47, 47, 47,
- 47, 47, 47, 47, 47, 39, 47, 91, 40, 90,
- 99, 47, 47, 47, 47, 54, 54, 54, 89, 88,
- 41, 55, 87, 49, 100, 43, 51, 51, 51, 86,
- 51, 95, 95, 96, 85, 51, 51, 51, 51, 52,
-
- 99, 52, 52, 52, 95, 95, 96, 84, 46, 83,
- 82, 81, 39, 79, 100, 33, 33, 33, 33, 33,
- 33, 33, 33, 37, 80, 77, 37, 37, 37, 44,
- 40, 44, 50, 76, 50, 52, 75, 52, 74, 52,
- 52, 53, 73, 53, 53, 53, 53, 56, 56, 56,
- 72, 56, 56, 57, 71, 57, 57, 59, 59, 59,
- 59, 59, 59, 59, 59, 61, 61, 61, 61, 61,
- 61, 61, 61, 67, 70, 67, 68, 68, 68, 62,
- 68, 68, 98, 98, 98, 98, 98, 98, 98, 98,
- 60, 66, 65, 64, 63, 62, 60, 58, 103, 48,
-
- 48, 103, 11, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103
- } ;
-
-static yyconst flex_int16_t yy_chk[339] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 3, 13, 13, 101, 3,
- 3, 3, 3, 15, 3, 14, 14, 32, 32, 3,
- 3, 3, 3, 3, 5, 5, 5, 15, 5, 31,
- 31, 31, 5, 5, 5, 5, 5, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-
- 7, 7, 9, 16, 29, 33, 9, 9, 9, 9,
- 10, 54, 54, 54, 10, 10, 10, 10, 17, 33,
- 28, 17, 28, 28, 28, 100, 72, 16, 29, 28,
- 97, 60, 72, 17, 60, 94, 17, 92, 17, 19,
- 19, 19, 19, 19, 19, 19, 91, 88, 19, 19,
- 19, 19, 19, 19, 19, 19, 19, 19, 19, 19,
- 19, 19, 20, 20, 20, 23, 20, 87, 23, 86,
- 96, 20, 20, 20, 20, 30, 30, 30, 85, 84,
- 23, 30, 83, 23, 96, 23, 25, 25, 25, 82,
- 25, 93, 93, 93, 81, 25, 25, 25, 25, 53,
-
- 98, 53, 53, 53, 95, 95, 95, 80, 53, 79,
- 78, 77, 76, 74, 98, 104, 104, 104, 104, 104,
- 104, 104, 104, 105, 73, 71, 105, 105, 105, 106,
- 70, 106, 107, 69, 107, 108, 68, 108, 66, 108,
- 108, 109, 65, 109, 109, 109, 109, 110, 110, 110,
- 64, 110, 110, 111, 63, 111, 111, 112, 112, 112,
- 112, 112, 112, 112, 112, 113, 113, 113, 113, 113,
- 113, 113, 113, 114, 62, 114, 115, 115, 115, 61,
- 115, 115, 116, 116, 116, 116, 116, 116, 116, 116,
- 59, 49, 43, 42, 41, 40, 39, 38, 35, 22,
-
- 21, 11, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103
- } ;
-
-/* Table of booleans, true if rule could match eol. */
-static yyconst flex_int32_t yy_rule_can_match_eol[21] =
- { 0,
-1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
- 0, };
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-extern int yy_flex_debug;
-int yy_flex_debug = 0;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "dtc-lexer.l"
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-
-
-
-#line 37 "dtc-lexer.l"
-#include "dtc.h"
-#include "srcpos.h"
-#include "dtc-parser.tab.h"
-
-
-/*#define LEXDEBUG 1*/
-
-#ifdef LEXDEBUG
-#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
-#else
-#define DPRINT(fmt, ...) do { } while (0)
-#endif
-
-static int dts_version; /* = 0 */
-
-#define BEGIN_DEFAULT() if (dts_version == 0) { \
- DPRINT("<INITIAL>\n"); \
- BEGIN(INITIAL); \
- } else { \
- DPRINT("<V1>\n"); \
- BEGIN(V1); \
- }
-
-static void push_input_file(const char *filename);
-static int pop_input_file(void);
-#line 638 "dtc-lexer.lex.c"
-
-#define INITIAL 0
-#define INCLUDE 1
-#define BYTESTRING 2
-#define PROPNODENAME 3
-#define V1 4
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap (void );
-#else
-extern int yywrap (void );
-#endif
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- int n; \
- for ( n = 0; n < max_size && \
- (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(yyin); \
- } \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int yylex (void);
-
-#define YY_DECL int yylex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
-#line 64 "dtc-lexer.l"
-
-#line 795 "dtc-lexer.lex.c"
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! yyin )
- yyin = stdin;
-
- if ( ! yyout )
- yyout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of yytext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
-yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 303 );
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
- if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
- {
- int yyl;
- for ( yyl = 0; yyl < yyleng; ++yyl )
- if ( yytext[yyl] == '\n' )
-
- yylineno++;
-;
- }
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = (yy_hold_char);
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
-
-case 1:
-/* rule 1 can match eol */
-YY_RULE_SETUP
-#line 65 "dtc-lexer.l"
-{
- char *name = strchr(yytext, '\"') + 1;
- yytext[yyleng-1] = '\0';
- push_input_file(name);
- }
- YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(INCLUDE):
-case YY_STATE_EOF(BYTESTRING):
-case YY_STATE_EOF(PROPNODENAME):
-case YY_STATE_EOF(V1):
-#line 71 "dtc-lexer.l"
-{
- if (!pop_input_file()) {
- yyterminate();
- }
- }
- YY_BREAK
-case 2:
-/* rule 2 can match eol */
-YY_RULE_SETUP
-#line 77 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("String: %s\n", yytext);
- yylval.data = data_copy_escape_string(yytext+1,
- yyleng-2);
- yylloc.first_line = yylineno;
- return DT_STRING;
- }
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 87 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /dts-v1/\n");
- dts_version = 1;
- BEGIN_DEFAULT();
- return DT_V1;
- }
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 96 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /memreserve/\n");
- BEGIN_DEFAULT();
- return DT_MEMRESERVE;
- }
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 104 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Label: %s\n", yytext);
- yylval.labelref = strdup(yytext);
- yylval.labelref[yyleng-1] = '\0';
- return DT_LABEL;
- }
- YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 113 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- if (*yytext == 'b')
- yylval.cbase = 2;
- else if (*yytext == 'o')
- yylval.cbase = 8;
- else if (*yytext == 'd')
- yylval.cbase = 10;
- else
- yylval.cbase = 16;
- DPRINT("Base: %d\n", yylval.cbase);
- return DT_BASE;
- }
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 128 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LEGACYLITERAL;
- }
- YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 136 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LITERAL;
- }
- YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 144 "dtc-lexer.l"
-{ /* label reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 152 "dtc-lexer.l"
-{ /* new-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yytext[yyleng-1] = '\0';
- DPRINT("Ref: %s\n", yytext+2);
- yylval.labelref = strdup(yytext+2);
- return DT_REF;
- }
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 161 "dtc-lexer.l"
-{ /* old-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 169 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.byte = strtol(yytext, NULL, 16);
- DPRINT("Byte: %02x\n", (int)yylval.byte);
- return DT_BYTE;
- }
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 177 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("/BYTESTRING\n");
- BEGIN_DEFAULT();
- return ']';
- }
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 185 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("PropNodeName: %s\n", yytext);
- yylval.propnodename = strdup(yytext);
- BEGIN_DEFAULT();
- return DT_PROPNODENAME;
- }
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 194 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Binary Include\n");
- return DT_INCBIN;
- }
- YY_BREAK
-case 16:
-/* rule 16 can match eol */
-YY_RULE_SETUP
-#line 201 "dtc-lexer.l"
-/* eat whitespace */
- YY_BREAK
-case 17:
-/* rule 17 can match eol */
-YY_RULE_SETUP
-#line 202 "dtc-lexer.l"
-/* eat C-style comments */
- YY_BREAK
-case 18:
-/* rule 18 can match eol */
-YY_RULE_SETUP
-#line 203 "dtc-lexer.l"
-/* eat C++-style comments */
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 205 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Char: %c (\\x%02x)\n", yytext[0],
- (unsigned)yytext[0]);
- if (yytext[0] == '[') {
- DPRINT("<BYTESTRING>\n");
- BEGIN(BYTESTRING);
- }
- if ((yytext[0] == '{')
- || (yytext[0] == ';')) {
- DPRINT("<PROPNODENAME>\n");
- BEGIN(PROPNODENAME);
- }
- return yytext[0];
- }
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 222 "dtc-lexer.l"
-ECHO;
- YY_BREAK
-#line 1120 "dtc-lexer.lex.c"
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed yyin at a new source and called
- * yylex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( yywrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * yytext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of yylex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- yyrestart(yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 103);
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- yyrestart(yyin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( yywrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve yytext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- if ( c == '\n' )
-
- yylineno++;
-;
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void yyrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_init_buffer(YY_CURRENT_BUFFER,input_file );
- yy_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * yypop_buffer_state();
- * yypush_buffer_state(new_buffer);
- */
- yyensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- yy_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (yywrap()) processing, but the only time this flag
- * is looked at is after yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void yy_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- yy_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with yy_create_buffer()
- *
- */
- void yy_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- yyfree((void *) b->yy_ch_buf );
-
- yyfree((void *) b );
-}
-
-#ifndef __cplusplus
-extern int isatty (int );
-#endif /* __cplusplus */
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a yyrestart() or at EOF.
- */
- static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- yy_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then yy_init_buffer was _probably_
- * called from yyrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
- */
- void yy_flush_buffer (YY_BUFFER_STATE b )
-{
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == YY_CURRENT_BUFFER )
- yy_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- * the current state. This function will allocate the stack
- * if necessary.
- * @param new_buffer The new state.
- *
- */
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
- if (new_buffer == NULL)
- return;
-
- yyensure_buffer_stack();
-
- /* This block is copied from yy_switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from yy_switch_to_buffer. */
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- * The next element becomes the new top.
- *
- */
-void yypop_buffer_state (void)
-{
- if (!YY_CURRENT_BUFFER)
- return;
-
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
-}
-
-/* Allocates the stack if it does not exist.
- * Guarantees space for at least one push.
- */
-static void yyensure_buffer_stack (void)
-{
- int num_to_alloc;
-
- if (!(yy_buffer_stack)) {
-
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
- */
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
-{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- yy_switch_to_buffer(b );
-
- return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to yylex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- *
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- * yy_scan_bytes() instead.
- */
-YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
-{
-
- return yy_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
- * scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
-{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) yyalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = yy_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- yytext[yyleng] = (yy_hold_char); \
- (yy_c_buf_p) = yytext + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- yyleng = yyless_macro_arg; \
- } \
- while ( 0 )
-
-/* Accessor methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- *
- */
-int yyget_lineno (void)
-{
-
- return yylineno;
-}
-
-/** Get the input stream.
- *
- */
-FILE *yyget_in (void)
-{
- return yyin;
-}
-
-/** Get the output stream.
- *
- */
-FILE *yyget_out (void)
-{
- return yyout;
-}
-
-/** Get the length of the current token.
- *
- */
-int yyget_leng (void)
-{
- return yyleng;
-}
-
-/** Get the current token.
- *
- */
-
-char *yyget_text (void)
-{
- return yytext;
-}
-
-/** Set the current line number.
- * @param line_number
- *
- */
-void yyset_lineno (int line_number )
-{
-
- yylineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- *
- * @see yy_switch_to_buffer
- */
-void yyset_in (FILE * in_str )
-{
- yyin = in_str ;
-}
-
-void yyset_out (FILE * out_str )
-{
- yyout = out_str ;
-}
-
-int yyget_debug (void)
-{
- return yy_flex_debug;
-}
-
-void yyset_debug (int bdebug )
-{
- yy_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
- /* Initialization is the same as for the non-reentrant scanner.
- * This function is called from yylex_destroy(), so don't allocate here.
- */
-
- /* We do not touch yylineno unless the option is enabled. */
- yylineno = 1;
-
- (yy_buffer_stack) = 0;
- (yy_buffer_stack_top) = 0;
- (yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
- (yy_init) = 0;
- (yy_start) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
- yyin = stdin;
- yyout = stdout;
-#else
- yyin = (FILE *) 0;
- yyout = (FILE *) 0;
-#endif
-
- /* For future reference: Set errno on error, since we are called by
- * yylex_init()
- */
- return 0;
-}
-
-/* yylex_destroy is for both reentrant and non-reentrant scanners. */
-int yylex_destroy (void)
-{
-
- /* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- yypop_buffer_state();
- }
-
- /* Destroy the stack itself. */
- yyfree((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
-
- /* Reset the globals. This is important in a non-reentrant scanner so the next time
- * yylex() is called, initialization will occur. */
- yy_init_globals( );
-
- return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-}
-#endif
-
-void *yyalloc (yy_size_t size )
-{
- return (void *) malloc( size );
-}
-
-void *yyrealloc (void * ptr, yy_size_t size )
-{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-}
-
-void yyfree (void * ptr )
-{
- free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-#line 222 "dtc-lexer.l"
-
-
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
- struct dtc_file *file;
- YY_BUFFER_STATE yy_prev_buf;
- int yy_prev_lineno;
- struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH (100)
-
-static int incl_depth = 0;
-
-
-static void push_input_file(const char *filename)
-{
- struct incl_file *incl_file;
- struct dtc_file *newfile;
- struct search_path search, *searchptr = NULL;
-
- assert(filename);
-
- if (incl_depth++ >= MAX_INCLUDE_DEPTH)
- die("Includes nested too deeply");
-
- if (srcpos_file) {
- search.dir = srcpos_file->dir;
- search.next = NULL;
- search.prev = NULL;
- searchptr = &search;
- }
-
- newfile = dtc_open_file(filename, searchptr);
-
- incl_file = xmalloc(sizeof(struct incl_file));
-
- /*
- * Save current context.
- */
- incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
- incl_file->yy_prev_lineno = yylineno;
- incl_file->file = srcpos_file;
- incl_file->prev = incl_file_stack;
-
- incl_file_stack = incl_file;
-
- /*
- * Establish new context.
- */
- srcpos_file = newfile;
- yylineno = 1;
- yyin = newfile->file;
- yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
-}
-
-
-static int pop_input_file(void)
-{
- struct incl_file *incl_file;
-
- if (incl_file_stack == 0)
- return 0;
-
- dtc_close_file(srcpos_file);
-
- /*
- * Pop.
- */
- --incl_depth;
- incl_file = incl_file_stack;
- incl_file_stack = incl_file->prev;
-
- /*
- * Recover old context.
- */
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(incl_file->yy_prev_buf);
- yylineno = incl_file->yy_prev_lineno;
- srcpos_file = incl_file->file;
- yyin = incl_file->file ? incl_file->file->file : NULL;
-
- /*
- * Free old state.
- */
- free(incl_file);
-
- return 1;
-}
-
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
deleted file mode 100644
index 27129377e5d2..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
+++ /dev/null
@@ -1,2040 +0,0 @@
-/* A Bison parser, made by GNU Bison 2.3. */
-
-/* Skeleton implementation for Bison's Yacc-like parsers in C
-
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* C LALR(1) parser skeleton written by Richard Stallman, by
- simplifying the original so-called "semantic" parser. */
-
-/* All symbols defined below should begin with yy or YY, to avoid
- infringing on user name space. This should be done even for local
- variables, as they might otherwise be expanded by user macros.
- There are some unavoidable exceptions within include files to
- define necessary library symbols; they are noted "INFRINGES ON
- USER NAME SPACE" below. */
-
-/* Identify Bison output. */
-#define YYBISON 1
-
-/* Bison version. */
-#define YYBISON_VERSION "2.3"
-
-/* Skeleton name. */
-#define YYSKELETON_NAME "yacc.c"
-
-/* Pure parsers. */
-#define YYPURE 0
-
-/* Using locations. */
-#define YYLSP_NEEDED 1
-
-
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- DT_V1 = 258,
- DT_MEMRESERVE = 259,
- DT_PROPNODENAME = 260,
- DT_LITERAL = 261,
- DT_LEGACYLITERAL = 262,
- DT_BASE = 263,
- DT_BYTE = 264,
- DT_STRING = 265,
- DT_LABEL = 266,
- DT_REF = 267,
- DT_INCBIN = 268
- };
-#endif
-/* Tokens. */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
-
-
-
-/* Copy the first part of user declarations. */
-#line 23 "dtc-parser.y"
-
-#include <stdio.h>
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern int yylex(void);
-
-extern struct boot_info *the_boot_info;
-extern int treesource_error;
-
-static unsigned long long eval_literal(const char *s, int base, int bits);
-
-
-/* Enabling traces. */
-#ifndef YYDEBUG
-# define YYDEBUG 0
-#endif
-
-/* Enabling verbose error messages. */
-#ifdef YYERROR_VERBOSE
-# undef YYERROR_VERBOSE
-# define YYERROR_VERBOSE 1
-#else
-# define YYERROR_VERBOSE 0
-#endif
-
-/* Enabling the token table. */
-#ifndef YYTOKEN_TABLE
-# define YYTOKEN_TABLE 0
-#endif
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-#line 37 "dtc-parser.y"
-{
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-/* Line 187 of yacc.c. */
-#line 153 "dtc-parser.tab.c"
- YYSTYPE;
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
- int first_line;
- int first_column;
- int last_line;
- int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-
-/* Copy the second part of user declarations. */
-
-
-/* Line 216 of yacc.c. */
-#line 178 "dtc-parser.tab.c"
-
-#ifdef short
-# undef short
-#endif
-
-#ifdef YYTYPE_UINT8
-typedef YYTYPE_UINT8 yytype_uint8;
-#else
-typedef unsigned char yytype_uint8;
-#endif
-
-#ifdef YYTYPE_INT8
-typedef YYTYPE_INT8 yytype_int8;
-#elif (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-typedef signed char yytype_int8;
-#else
-typedef short int yytype_int8;
-#endif
-
-#ifdef YYTYPE_UINT16
-typedef YYTYPE_UINT16 yytype_uint16;
-#else
-typedef unsigned short int yytype_uint16;
-#endif
-
-#ifdef YYTYPE_INT16
-typedef YYTYPE_INT16 yytype_int16;
-#else
-typedef short int yytype_int16;
-#endif
-
-#ifndef YYSIZE_T
-# ifdef __SIZE_TYPE__
-# define YYSIZE_T __SIZE_TYPE__
-# elif defined size_t
-# define YYSIZE_T size_t
-# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-# define YYSIZE_T size_t
-# else
-# define YYSIZE_T unsigned int
-# endif
-#endif
-
-#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
-
-#ifndef YY_
-# if YYENABLE_NLS
-# if ENABLE_NLS
-# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
-# define YY_(msgid) dgettext ("bison-runtime", msgid)
-# endif
-# endif
-# ifndef YY_
-# define YY_(msgid) msgid
-# endif
-#endif
-
-/* Suppress unused-variable warnings by "using" E. */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(e) ((void) (e))
-#else
-# define YYUSE(e) /* empty */
-#endif
-
-/* Identity function, used to suppress warnings about constant conditions. */
-#ifndef lint
-# define YYID(n) (n)
-#else
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static int
-YYID (int i)
-#else
-static int
-YYID (i)
- int i;
-#endif
-{
- return i;
-}
-#endif
-
-#if ! defined yyoverflow || YYERROR_VERBOSE
-
-/* The parser invokes alloca or malloc; define the necessary symbols. */
-
-# ifdef YYSTACK_USE_ALLOCA
-# if YYSTACK_USE_ALLOCA
-# ifdef __GNUC__
-# define YYSTACK_ALLOC __builtin_alloca
-# elif defined __BUILTIN_VA_ARG_INCR
-# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
-# elif defined _AIX
-# define YYSTACK_ALLOC __alloca
-# elif defined _MSC_VER
-# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
-# define alloca _alloca
-# else
-# define YYSTACK_ALLOC alloca
-# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
-# endif
-# endif
-# endif
-# endif
-# endif
-
-# ifdef YYSTACK_ALLOC
- /* Pacify GCC's `empty if-body' warning. */
-# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
-# ifndef YYSTACK_ALLOC_MAXIMUM
- /* The OS might guarantee only one guard page at the bottom of the stack,
- and a page size can be as small as 4096 bytes. So we cannot safely
- invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
- to allow for a few compiler-allocated temporary stack slots. */
-# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
-# endif
-# else
-# define YYSTACK_ALLOC YYMALLOC
-# define YYSTACK_FREE YYFREE
-# ifndef YYSTACK_ALLOC_MAXIMUM
-# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
-# endif
-# if (defined __cplusplus && ! defined _STDLIB_H \
- && ! ((defined YYMALLOC || defined malloc) \
- && (defined YYFREE || defined free)))
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
-# endif
-# endif
-# ifndef YYMALLOC
-# define YYMALLOC malloc
-# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# ifndef YYFREE
-# define YYFREE free
-# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void free (void *); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# endif
-#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
-
-
-#if (! defined yyoverflow \
- && (! defined __cplusplus \
- || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
- && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-
-/* A type that is properly aligned for any stack member. */
-union yyalloc
-{
- yytype_int16 yyss;
- YYSTYPE yyvs;
- YYLTYPE yyls;
-};
-
-/* The size of the maximum gap between one aligned stack and the next. */
-# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-
-/* The size of an array large to enough to hold all stacks, each with
- N elements. */
-# define YYSTACK_BYTES(N) \
- ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
- + 2 * YYSTACK_GAP_MAXIMUM)
-
-/* Copy COUNT objects from FROM to TO. The source and destination do
- not overlap. */
-# ifndef YYCOPY
-# if defined __GNUC__ && 1 < __GNUC__
-# define YYCOPY(To, From, Count) \
- __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-# else
-# define YYCOPY(To, From, Count) \
- do \
- { \
- YYSIZE_T yyi; \
- for (yyi = 0; yyi < (Count); yyi++) \
- (To)[yyi] = (From)[yyi]; \
- } \
- while (YYID (0))
-# endif
-# endif
-
-/* Relocate STACK from its old location to the new one. The
- local variables YYSIZE and YYSTACKSIZE give the old and new number of
- elements in the stack, and YYPTR gives the new location of the
- stack. Advance YYPTR to a properly aligned location for the next
- stack. */
-# define YYSTACK_RELOCATE(Stack) \
- do \
- { \
- YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack, Stack, yysize); \
- Stack = &yyptr->Stack; \
- yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
- yyptr += yynewbytes / sizeof (*yyptr); \
- } \
- while (YYID (0))
-
-#endif
-
-/* YYFINAL -- State number of the termination state. */
-#define YYFINAL 9
-/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 73
-
-/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 27
-/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 20
-/* YYNRULES -- Number of rules. */
-#define YYNRULES 45
-/* YYNRULES -- Number of states. */
-#define YYNSTATES 76
-
-/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-#define YYUNDEFTOK 2
-#define YYMAXUTOK 268
-
-#define YYTRANSLATE(YYX) \
- ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
-/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-static const yytype_uint8 yytranslate[] =
-{
- 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 24, 26, 2, 2, 25, 15, 2, 16, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 14,
- 20, 19, 21, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 22, 2, 23, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 17, 2, 18, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
- 5, 6, 7, 8, 9, 10, 11, 12, 13
-};
-
-#if YYDEBUG
-/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
- YYRHS. */
-static const yytype_uint8 yyprhs[] =
-{
- 0, 0, 3, 8, 11, 12, 15, 21, 22, 25,
- 27, 34, 36, 38, 41, 47, 48, 51, 57, 61,
- 64, 69, 74, 77, 87, 93, 96, 97, 100, 103,
- 104, 107, 110, 113, 114, 116, 118, 121, 122, 125,
- 128, 129, 132, 135, 139, 140
-};
-
-/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-static const yytype_int8 yyrhs[] =
-{
- 28, 0, -1, 3, 14, 29, 34, -1, 31, 34,
- -1, -1, 30, 29, -1, 46, 4, 33, 33, 14,
- -1, -1, 32, 31, -1, 30, -1, 46, 4, 33,
- 15, 33, 14, -1, 6, -1, 7, -1, 16, 35,
- -1, 17, 36, 44, 18, 14, -1, -1, 36, 37,
- -1, 46, 5, 19, 38, 14, -1, 46, 5, 14,
- -1, 39, 10, -1, 39, 20, 40, 21, -1, 39,
- 22, 43, 23, -1, 39, 12, -1, 39, 13, 24,
- 10, 25, 33, 25, 33, 26, -1, 39, 13, 24,
- 10, 26, -1, 38, 11, -1, -1, 38, 25, -1,
- 39, 11, -1, -1, 40, 42, -1, 40, 12, -1,
- 40, 11, -1, -1, 8, -1, 6, -1, 41, 7,
- -1, -1, 43, 9, -1, 43, 11, -1, -1, 45,
- 44, -1, 45, 37, -1, 46, 5, 35, -1, -1,
- 11, -1
-};
-
-/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-static const yytype_uint16 yyrline[] =
-{
- 0, 89, 89, 93, 101, 104, 111, 119, 122, 129,
- 133, 140, 144, 151, 158, 166, 169, 176, 180, 187,
- 191, 195, 199, 203, 220, 231, 239, 242, 246, 254,
- 257, 261, 266, 274, 277, 281, 285, 293, 296, 300,
- 308, 311, 315, 323, 331, 334
-};
-#endif
-
-#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
-/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
- First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-static const char *const yytname[] =
-{
- "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
- "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
- "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
- "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
- "')'", "$accept", "sourcefile", "memreserves", "memreserve",
- "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
- "proplist", "propdef", "propdata", "propdataprefix", "celllist",
- "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
-};
-#endif
-
-# ifdef YYPRINT
-/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
- token YYLEX-NUM. */
-static const yytype_uint16 yytoknum[] =
-{
- 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
- 265, 266, 267, 268, 59, 45, 47, 123, 125, 61,
- 60, 62, 91, 93, 40, 44, 41
-};
-# endif
-
-/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-static const yytype_uint8 yyr1[] =
-{
- 0, 27, 28, 28, 29, 29, 30, 31, 31, 32,
- 32, 33, 33, 34, 35, 36, 36, 37, 37, 38,
- 38, 38, 38, 38, 38, 38, 39, 39, 39, 40,
- 40, 40, 40, 41, 41, 42, 42, 43, 43, 43,
- 44, 44, 44, 45, 46, 46
-};
-
-/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-static const yytype_uint8 yyr2[] =
-{
- 0, 2, 4, 2, 0, 2, 5, 0, 2, 1,
- 6, 1, 1, 2, 5, 0, 2, 5, 3, 2,
- 4, 4, 2, 9, 5, 2, 0, 2, 2, 0,
- 2, 2, 2, 0, 1, 1, 2, 0, 2, 2,
- 0, 2, 2, 3, 0, 1
-};
-
-/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
- STATE-NUM when YYTABLE doesn't specify something else to do. Zero
- means the default is an error. */
-static const yytype_uint8 yydefact[] =
-{
- 7, 0, 45, 0, 9, 0, 7, 0, 4, 1,
- 0, 3, 8, 0, 0, 4, 0, 15, 13, 11,
- 12, 0, 2, 5, 0, 40, 0, 0, 0, 16,
- 0, 40, 0, 0, 6, 0, 42, 41, 0, 10,
- 14, 18, 26, 43, 0, 0, 25, 17, 27, 19,
- 28, 22, 0, 29, 37, 0, 33, 0, 0, 35,
- 34, 32, 31, 20, 0, 30, 38, 39, 21, 0,
- 24, 36, 0, 0, 0, 23
-};
-
-/* YYDEFGOTO[NTERM-NUM]. */
-static const yytype_int8 yydefgoto[] =
-{
- -1, 3, 14, 4, 5, 6, 27, 11, 18, 25,
- 29, 44, 45, 56, 64, 65, 57, 30, 31, 7
-};
-
-/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
- STATE-NUM. */
-#define YYPACT_NINF -14
-static const yytype_int8 yypact[] =
-{
- 30, -11, -14, 7, -14, -1, 27, 13, 27, -14,
- 8, -14, -14, 40, -1, 27, 35, -14, -14, -14,
- -14, 21, -14, -14, 40, 24, 40, 28, 40, -14,
- 32, 24, 46, 38, -14, 39, -14, -14, 26, -14,
- -14, -14, -14, -14, -9, 10, -14, -14, -14, -14,
- -14, -14, 31, -14, -14, 44, -2, 3, 23, -14,
- -14, -14, -14, -14, 50, -14, -14, -14, -14, 40,
- -14, -14, 33, 40, 36, -14
-};
-
-/* YYPGOTO[NTERM-NUM]. */
-static const yytype_int8 yypgoto[] =
-{
- -14, -14, 48, 29, 53, -14, -13, 47, 34, -14,
- 37, -14, -14, -14, -14, -14, -14, 42, -14, -7
-};
-
-/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
- positive, shift that token. If negative, reduce the rule which
- number is the opposite. If zero, do what YYDEFACT says.
- If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -45
-static const yytype_int8 yytable[] =
-{
- 21, 16, 46, 8, 59, 47, 60, 9, 16, 61,
- 62, 28, 66, 33, 67, 10, 48, 13, 32, 63,
- 49, 50, 51, 52, 32, 17, 68, 19, 20, -44,
- 53, -44, 54, 1, -44, 2, 26, 15, 2, 24,
- 41, 2, 34, 17, 15, 42, 19, 20, 69, 70,
- 35, 38, 39, 40, 58, 55, 72, 71, 73, 12,
- 74, 22, 75, 23, 0, 0, 0, 0, 36, 0,
- 0, 0, 43, 37
-};
-
-static const yytype_int8 yycheck[] =
-{
- 13, 8, 11, 14, 6, 14, 8, 0, 15, 11,
- 12, 24, 9, 26, 11, 16, 25, 4, 25, 21,
- 10, 11, 12, 13, 31, 17, 23, 6, 7, 5,
- 20, 4, 22, 3, 4, 11, 15, 8, 11, 4,
- 14, 11, 14, 17, 15, 19, 6, 7, 25, 26,
- 18, 5, 14, 14, 10, 24, 69, 7, 25, 6,
- 73, 14, 26, 15, -1, -1, -1, -1, 31, -1,
- -1, -1, 38, 31
-};
-
-/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
- symbol of state STATE-NUM. */
-static const yytype_uint8 yystos[] =
-{
- 0, 3, 11, 28, 30, 31, 32, 46, 14, 0,
- 16, 34, 31, 4, 29, 30, 46, 17, 35, 6,
- 7, 33, 34, 29, 4, 36, 15, 33, 33, 37,
- 44, 45, 46, 33, 14, 18, 37, 44, 5, 14,
- 14, 14, 19, 35, 38, 39, 11, 14, 25, 10,
- 11, 12, 13, 20, 22, 24, 40, 43, 10, 6,
- 8, 11, 12, 21, 41, 42, 9, 11, 23, 25,
- 26, 7, 33, 25, 33, 26
-};
-
-#define yyerrok (yyerrstatus = 0)
-#define yyclearin (yychar = YYEMPTY)
-#define YYEMPTY (-2)
-#define YYEOF 0
-
-#define YYACCEPT goto yyacceptlab
-#define YYABORT goto yyabortlab
-#define YYERROR goto yyerrorlab
-
-
-/* Like YYERROR except do call yyerror. This remains here temporarily
- to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. */
-
-#define YYFAIL goto yyerrlab
-
-#define YYRECOVERING() (!!yyerrstatus)
-
-#define YYBACKUP(Token, Value) \
-do \
- if (yychar == YYEMPTY && yylen == 1) \
- { \
- yychar = (Token); \
- yylval = (Value); \
- yytoken = YYTRANSLATE (yychar); \
- YYPOPSTACK (1); \
- goto yybackup; \
- } \
- else \
- { \
- yyerror (YY_("syntax error: cannot back up")); \
- YYERROR; \
- } \
-while (YYID (0))
-
-
-#define YYTERROR 1
-#define YYERRCODE 256
-
-
-/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
- If N is 0, then set CURRENT to the empty location which ends
- the previous symbol: RHS[0] (always defined). */
-
-#define YYRHSLOC(Rhs, K) ((Rhs)[K])
-#ifndef YYLLOC_DEFAULT
-# define YYLLOC_DEFAULT(Current, Rhs, N) \
- do \
- if (YYID (N)) \
- { \
- (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
- (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
- (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
- (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- } \
- else \
- { \
- (Current).first_line = (Current).last_line = \
- YYRHSLOC (Rhs, 0).last_line; \
- (Current).first_column = (Current).last_column = \
- YYRHSLOC (Rhs, 0).last_column; \
- } \
- while (YYID (0))
-#endif
-
-
-/* YY_LOCATION_PRINT -- Print the location on the stream.
- This macro was not mandated originally: define only if we know
- we won't break user code: when these are the locations we know. */
-
-#ifndef YY_LOCATION_PRINT
-# if YYLTYPE_IS_TRIVIAL
-# define YY_LOCATION_PRINT(File, Loc) \
- fprintf (File, "%d.%d-%d.%d", \
- (Loc).first_line, (Loc).first_column, \
- (Loc).last_line, (Loc).last_column)
-# else
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-# endif
-#endif
-
-
-/* YYLEX -- calling `yylex' with the right arguments. */
-
-#ifdef YYLEX_PARAM
-# define YYLEX yylex (YYLEX_PARAM)
-#else
-# define YYLEX yylex ()
-#endif
-
-/* Enable debugging if requested. */
-#if YYDEBUG
-
-# ifndef YYFPRINTF
-# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-# define YYFPRINTF fprintf
-# endif
-
-# define YYDPRINTF(Args) \
-do { \
- if (yydebug) \
- YYFPRINTF Args; \
-} while (YYID (0))
-
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
-do { \
- if (yydebug) \
- { \
- YYFPRINTF (stderr, "%s ", Title); \
- yy_symbol_print (stderr, \
- Type, Value, Location); \
- YYFPRINTF (stderr, "\n"); \
- } \
-} while (YYID (0))
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
-#else
-static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
- YYLTYPE const * const yylocationp;
-#endif
-{
- if (!yyvaluep)
- return;
- YYUSE (yylocationp);
-# ifdef YYPRINT
- if (yytype < YYNTOKENS)
- YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-# else
- YYUSE (yyoutput);
-# endif
- switch (yytype)
- {
- default:
- break;
- }
-}
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
-#else
-static void
-yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
- YYLTYPE const * const yylocationp;
-#endif
-{
- if (yytype < YYNTOKENS)
- YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
- else
- YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
- YY_LOCATION_PRINT (yyoutput, *yylocationp);
- YYFPRINTF (yyoutput, ": ");
- yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
- YYFPRINTF (yyoutput, ")");
-}
-
-/*------------------------------------------------------------------.
-| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-| TOP (included). |
-`------------------------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
-#else
-static void
-yy_stack_print (bottom, top)
- yytype_int16 *bottom;
- yytype_int16 *top;
-#endif
-{
- YYFPRINTF (stderr, "Stack now");
- for (; bottom <= top; ++bottom)
- YYFPRINTF (stderr, " %d", *bottom);
- YYFPRINTF (stderr, "\n");
-}
-
-# define YY_STACK_PRINT(Bottom, Top) \
-do { \
- if (yydebug) \
- yy_stack_print ((Bottom), (Top)); \
-} while (YYID (0))
-
-
-/*------------------------------------------------.
-| Report that the YYRULE is going to be reduced. |
-`------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
-#else
-static void
-yy_reduce_print (yyvsp, yylsp, yyrule)
- YYSTYPE *yyvsp;
- YYLTYPE *yylsp;
- int yyrule;
-#endif
-{
- int yynrhs = yyr2[yyrule];
- int yyi;
- unsigned long int yylno = yyrline[yyrule];
- YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
- yyrule - 1, yylno);
- /* The symbols being reduced. */
- for (yyi = 0; yyi < yynrhs; yyi++)
- {
- fprintf (stderr, " $%d = ", yyi + 1);
- yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
- &(yyvsp[(yyi + 1) - (yynrhs)])
- , &(yylsp[(yyi + 1) - (yynrhs)]) );
- fprintf (stderr, "\n");
- }
-}
-
-# define YY_REDUCE_PRINT(Rule) \
-do { \
- if (yydebug) \
- yy_reduce_print (yyvsp, yylsp, Rule); \
-} while (YYID (0))
-
-/* Nonzero means print parse trace. It is left uninitialized so that
- multiple parsers can coexist. */
-int yydebug;
-#else /* !YYDEBUG */
-# define YYDPRINTF(Args)
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
-# define YY_STACK_PRINT(Bottom, Top)
-# define YY_REDUCE_PRINT(Rule)
-#endif /* !YYDEBUG */
-
-
-/* YYINITDEPTH -- initial size of the parser's stacks. */
-#ifndef YYINITDEPTH
-# define YYINITDEPTH 200
-#endif
-
-/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
- if the built-in stack extension method is used).
-
- Do not make this value too large; the results are undefined if
- YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
- evaluated with infinite-precision integer arithmetic. */
-
-#ifndef YYMAXDEPTH
-# define YYMAXDEPTH 10000
-#endif
-
-
-
-#if YYERROR_VERBOSE
-
-# ifndef yystrlen
-# if defined __GLIBC__ && defined _STRING_H
-# define yystrlen strlen
-# else
-/* Return the length of YYSTR. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static YYSIZE_T
-yystrlen (const char *yystr)
-#else
-static YYSIZE_T
-yystrlen (yystr)
- const char *yystr;
-#endif
-{
- YYSIZE_T yylen;
- for (yylen = 0; yystr[yylen]; yylen++)
- continue;
- return yylen;
-}
-# endif
-# endif
-
-# ifndef yystpcpy
-# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
-# define yystpcpy stpcpy
-# else
-/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
- YYDEST. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static char *
-yystpcpy (char *yydest, const char *yysrc)
-#else
-static char *
-yystpcpy (yydest, yysrc)
- char *yydest;
- const char *yysrc;
-#endif
-{
- char *yyd = yydest;
- const char *yys = yysrc;
-
- while ((*yyd++ = *yys++) != '\0')
- continue;
-
- return yyd - 1;
-}
-# endif
-# endif
-
-# ifndef yytnamerr
-/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
- quotes and backslashes, so that it's suitable for yyerror. The
- heuristic is that double-quoting is unnecessary unless the string
- contains an apostrophe, a comma, or backslash (other than
- backslash-backslash). YYSTR is taken from yytname. If YYRES is
- null, do not copy; instead, return the length of what the result
- would have been. */
-static YYSIZE_T
-yytnamerr (char *yyres, const char *yystr)
-{
- if (*yystr == '"')
- {
- YYSIZE_T yyn = 0;
- char const *yyp = yystr;
-
- for (;;)
- switch (*++yyp)
- {
- case '\'':
- case ',':
- goto do_not_strip_quotes;
-
- case '\\':
- if (*++yyp != '\\')
- goto do_not_strip_quotes;
- /* Fall through. */
- default:
- if (yyres)
- yyres[yyn] = *yyp;
- yyn++;
- break;
-
- case '"':
- if (yyres)
- yyres[yyn] = '\0';
- return yyn;
- }
- do_not_strip_quotes: ;
- }
-
- if (! yyres)
- return yystrlen (yystr);
-
- return yystpcpy (yyres, yystr) - yyres;
-}
-# endif
-
-/* Copy into YYRESULT an error message about the unexpected token
- YYCHAR while in state YYSTATE. Return the number of bytes copied,
- including the terminating null byte. If YYRESULT is null, do not
- copy anything; just return the number of bytes that would be
- copied. As a special case, return 0 if an ordinary "syntax error"
- message will do. Return YYSIZE_MAXIMUM if overflow occurs during
- size calculation. */
-static YYSIZE_T
-yysyntax_error (char *yyresult, int yystate, int yychar)
-{
- int yyn = yypact[yystate];
-
- if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
- return 0;
- else
- {
- int yytype = YYTRANSLATE (yychar);
- YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
- YYSIZE_T yysize = yysize0;
- YYSIZE_T yysize1;
- int yysize_overflow = 0;
- enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
- char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
- int yyx;
-
-# if 0
- /* This is so xgettext sees the translatable formats that are
- constructed on the fly. */
- YY_("syntax error, unexpected %s");
- YY_("syntax error, unexpected %s, expecting %s");
- YY_("syntax error, unexpected %s, expecting %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
-# endif
- char *yyfmt;
- char const *yyf;
- static char const yyunexpected[] = "syntax error, unexpected %s";
- static char const yyexpecting[] = ", expecting %s";
- static char const yyor[] = " or %s";
- char yyformat[sizeof yyunexpected
- + sizeof yyexpecting - 1
- + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
- * (sizeof yyor - 1))];
- char const *yyprefix = yyexpecting;
-
- /* Start YYX at -YYN if negative to avoid negative indexes in
- YYCHECK. */
- int yyxbegin = yyn < 0 ? -yyn : 0;
-
- /* Stay within bounds of both yycheck and yytname. */
- int yychecklim = YYLAST - yyn + 1;
- int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
- int yycount = 1;
-
- yyarg[0] = yytname[yytype];
- yyfmt = yystpcpy (yyformat, yyunexpected);
-
- for (yyx = yyxbegin; yyx < yyxend; ++yyx)
- if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
- if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
- {
- yycount = 1;
- yysize = yysize0;
- yyformat[sizeof yyunexpected - 1] = '\0';
- break;
- }
- yyarg[yycount++] = yytname[yyx];
- yysize1 = yysize + yytnamerr (0, yytname[yyx]);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
- yyfmt = yystpcpy (yyfmt, yyprefix);
- yyprefix = yyor;
- }
-
- yyf = YY_(yyformat);
- yysize1 = yysize + yystrlen (yyf);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
-
- if (yysize_overflow)
- return YYSIZE_MAXIMUM;
-
- if (yyresult)
- {
- /* Avoid sprintf, as that infringes on the user's name space.
- Don't have undefined behavior even if the translation
- produced a string with the wrong number of "%s"s. */
- char *yyp = yyresult;
- int yyi = 0;
- while ((*yyp = *yyf) != '\0')
- {
- if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
- {
- yyp += yytnamerr (yyp, yyarg[yyi++]);
- yyf += 2;
- }
- else
- {
- yyp++;
- yyf++;
- }
- }
- }
- return yysize;
- }
-}
-#endif /* YYERROR_VERBOSE */
-
-
-/*-----------------------------------------------.
-| Release the memory associated to this symbol. |
-`-----------------------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
-#else
-static void
-yydestruct (yymsg, yytype, yyvaluep, yylocationp)
- const char *yymsg;
- int yytype;
- YYSTYPE *yyvaluep;
- YYLTYPE *yylocationp;
-#endif
-{
- YYUSE (yyvaluep);
- YYUSE (yylocationp);
-
- if (!yymsg)
- yymsg = "Deleting";
- YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
- switch (yytype)
- {
-
- default:
- break;
- }
-}
-
-
-/* Prevent warnings from -Wmissing-prototypes. */
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void *YYPARSE_PARAM);
-#else
-int yyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void);
-#else
-int yyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-
-
-/* The look-ahead symbol. */
-int yychar;
-
-/* The semantic value of the look-ahead symbol. */
-YYSTYPE yylval;
-
-/* Number of syntax errors so far. */
-int yynerrs;
-/* Location data for the look-ahead symbol. */
-YYLTYPE yylloc;
-
-
-
-/*----------.
-| yyparse. |
-`----------*/
-
-#ifdef YYPARSE_PARAM
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void *YYPARSE_PARAM)
-#else
-int
-yyparse (YYPARSE_PARAM)
- void *YYPARSE_PARAM;
-#endif
-#else /* ! YYPARSE_PARAM */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void)
-#else
-int
-yyparse ()
-
-#endif
-#endif
-{
-
- int yystate;
- int yyn;
- int yyresult;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
- /* Look-ahead token as an internal (translated) token number. */
- int yytoken = 0;
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
- /* Three stacks and their tools:
- `yyss': related to states,
- `yyvs': related to semantic values,
- `yyls': related to locations.
-
- Refer to the stacks thru separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
-
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss = yyssa;
- yytype_int16 *yyssp;
-
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs = yyvsa;
- YYSTYPE *yyvsp;
-
- /* The location stack. */
- YYLTYPE yylsa[YYINITDEPTH];
- YYLTYPE *yyls = yylsa;
- YYLTYPE *yylsp;
- /* The locations where the error started and ended. */
- YYLTYPE yyerror_range[2];
-
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
-
- YYSIZE_T yystacksize = YYINITDEPTH;
-
- /* The variables used to return semantic value and location from the
- action routines. */
- YYSTYPE yyval;
- YYLTYPE yyloc;
-
- /* The number of symbols on the RHS of the reduced rule.
- Keep to zero when no symbol should be popped. */
- int yylen = 0;
-
- YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
- yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
-
- /* Initialize stack pointers.
- Waste one element of value and location stack
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
-
- yyssp = yyss;
- yyvsp = yyvs;
- yylsp = yyls;
-#if YYLTYPE_IS_TRIVIAL
- /* Initialize the default location before parsing starts. */
- yylloc.first_line = yylloc.last_line = 1;
- yylloc.first_column = yylloc.last_column = 0;
-#endif
-
- goto yysetstate;
-
-/*------------------------------------------------------------.
-| yynewstate -- Push a new state, which is found in yystate. |
-`------------------------------------------------------------*/
- yynewstate:
- /* In all cases, when you get here, the value and location stacks
- have just been pushed. So pushing a state here evens the stacks. */
- yyssp++;
-
- yysetstate:
- *yyssp = yystate;
-
- if (yyss + yystacksize - 1 <= yyssp)
- {
- /* Get the current used size of the three stacks, in elements. */
- YYSIZE_T yysize = yyssp - yyss + 1;
-
-#ifdef yyoverflow
- {
- /* Give user a chance to reallocate the stack. Use copies of
- these so that the &'s don't force the real ones into
- memory. */
- YYSTYPE *yyvs1 = yyvs;
- yytype_int16 *yyss1 = yyss;
- YYLTYPE *yyls1 = yyls;
-
- /* Each stack pointer address is followed by the size of the
- data in use in that stack, in bytes. This used to be a
- conditional around just the two extra args, but that might
- be undefined if yyoverflow is a macro. */
- yyoverflow (YY_("memory exhausted"),
- &yyss1, yysize * sizeof (*yyssp),
- &yyvs1, yysize * sizeof (*yyvsp),
- &yyls1, yysize * sizeof (*yylsp),
- &yystacksize);
- yyls = yyls1;
- yyss = yyss1;
- yyvs = yyvs1;
- }
-#else /* no yyoverflow */
-# ifndef YYSTACK_RELOCATE
- goto yyexhaustedlab;
-# else
- /* Extend the stack our own way. */
- if (YYMAXDEPTH <= yystacksize)
- goto yyexhaustedlab;
- yystacksize *= 2;
- if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
-
- {
- yytype_int16 *yyss1 = yyss;
- union yyalloc *yyptr =
- (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
- if (! yyptr)
- goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss);
- YYSTACK_RELOCATE (yyvs);
- YYSTACK_RELOCATE (yyls);
-# undef YYSTACK_RELOCATE
- if (yyss1 != yyssa)
- YYSTACK_FREE (yyss1);
- }
-# endif
-#endif /* no yyoverflow */
-
- yyssp = yyss + yysize - 1;
- yyvsp = yyvs + yysize - 1;
- yylsp = yyls + yysize - 1;
-
- YYDPRINTF ((stderr, "Stack size increased to %lu\n",
- (unsigned long int) yystacksize));
-
- if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
- YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- goto yybackup;
-
-/*-----------.
-| yybackup. |
-`-----------*/
-yybackup:
-
- /* Do appropriate processing given the current state. Read a
- look-ahead token if we need one and don't already have one. */
-
- /* First try to decide what to do without reference to look-ahead token. */
- yyn = yypact[yystate];
- if (yyn == YYPACT_NINF)
- goto yydefault;
-
- /* Not known => get a look-ahead token if don't already have one. */
-
- /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
- if (yychar == YYEMPTY)
- {
- YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
- if (yychar <= YYEOF)
- {
- yychar = yytoken = YYEOF;
- YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
- yytoken = YYTRANSLATE (yychar);
- YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
- }
-
- /* If the proper action on seeing token YYTOKEN is to reduce or to
- detect an error, take that action. */
- yyn += yytoken;
- if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
- yyn = yytable[yyn];
- if (yyn <= 0)
- {
- if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- /* Count tokens shifted since error; after three, turn off error
- status. */
- if (yyerrstatus)
- yyerrstatus--;
-
- /* Shift the look-ahead token. */
- YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
-
- /* Discard the shifted token unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
-
- yystate = yyn;
- *++yyvsp = yylval;
- *++yylsp = yylloc;
- goto yynewstate;
-
-
-/*-----------------------------------------------------------.
-| yydefault -- do the default action for the current state. |
-`-----------------------------------------------------------*/
-yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
- goto yyreduce;
-
-
-/*-----------------------------.
-| yyreduce -- Do a reduction. |
-`-----------------------------*/
-yyreduce:
- /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-
- /* If YYLEN is nonzero, implement the default value of the action:
- `$$ = $1'.
-
- Otherwise, the following line sets YYVAL to garbage.
- This behavior is undocumented and Bison
- users should not rely upon it. Assigning to YYVAL
- unconditionally makes the parser a bit smaller, and it avoids a
- GCC warning that YYVAL may be used uninitialized. */
- yyval = yyvsp[1-yylen];
-
- /* Default location. */
- YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
- YY_REDUCE_PRINT (yyn);
- switch (yyn)
- {
- case 2:
-#line 90 "dtc-parser.y"
- {
- the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
- ;}
- break;
-
- case 3:
-#line 94 "dtc-parser.y"
- {
- the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
- ;}
- break;
-
- case 4:
-#line 101 "dtc-parser.y"
- {
- (yyval.re) = NULL;
- ;}
- break;
-
- case 5:
-#line 105 "dtc-parser.y"
- {
- (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
- ;}
- break;
-
- case 6:
-#line 112 "dtc-parser.y"
- {
- (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
- ;}
- break;
-
- case 7:
-#line 119 "dtc-parser.y"
- {
- (yyval.re) = NULL;
- ;}
- break;
-
- case 8:
-#line 123 "dtc-parser.y"
- {
- (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
- ;}
- break;
-
- case 9:
-#line 130 "dtc-parser.y"
- {
- (yyval.re) = (yyvsp[(1) - (1)].re);
- ;}
- break;
-
- case 10:
-#line 134 "dtc-parser.y"
- {
- (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
- ;}
- break;
-
- case 11:
-#line 141 "dtc-parser.y"
- {
- (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
- ;}
- break;
-
- case 12:
-#line 145 "dtc-parser.y"
- {
- (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
- ;}
- break;
-
- case 13:
-#line 152 "dtc-parser.y"
- {
- (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
- ;}
- break;
-
- case 14:
-#line 159 "dtc-parser.y"
- {
- (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
- ;}
- break;
-
- case 15:
-#line 166 "dtc-parser.y"
- {
- (yyval.proplist) = NULL;
- ;}
- break;
-
- case 16:
-#line 170 "dtc-parser.y"
- {
- (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
- ;}
- break;
-
- case 17:
-#line 177 "dtc-parser.y"
- {
- (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
- ;}
- break;
-
- case 18:
-#line 181 "dtc-parser.y"
- {
- (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
- ;}
- break;
-
- case 19:
-#line 188 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
- ;}
- break;
-
- case 20:
-#line 192 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 21:
-#line 196 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 22:
-#line 200 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 23:
-#line 204 "dtc-parser.y"
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
- struct data d = empty_data;
-
- if ((yyvsp[(6) - (9)].addr) != 0)
- if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
- yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
- (unsigned long long)(yyvsp[(6) - (9)].addr),
- (yyvsp[(4) - (9)].data).val, strerror(errno));
-
- d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
-
- (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
- dtc_close_file(file);
- ;}
- break;
-
- case 24:
-#line 221 "dtc-parser.y"
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
- struct data d = empty_data;
-
- d = data_copy_file(file->file, -1);
-
- (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
- dtc_close_file(file);
- ;}
- break;
-
- case 25:
-#line 232 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 26:
-#line 239 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 27:
-#line 243 "dtc-parser.y"
- {
- (yyval.data) = (yyvsp[(1) - (2)].data);
- ;}
- break;
-
- case 28:
-#line 247 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 29:
-#line 254 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 30:
-#line 258 "dtc-parser.y"
- {
- (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
- ;}
- break;
-
- case 31:
-#line 262 "dtc-parser.y"
- {
- (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
- (yyvsp[(2) - (2)].labelref)), -1);
- ;}
- break;
-
- case 32:
-#line 267 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 33:
-#line 274 "dtc-parser.y"
- {
- (yyval.cbase) = 16;
- ;}
- break;
-
- case 35:
-#line 282 "dtc-parser.y"
- {
- (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
- ;}
- break;
-
- case 36:
-#line 286 "dtc-parser.y"
- {
- (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
- ;}
- break;
-
- case 37:
-#line 293 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 38:
-#line 297 "dtc-parser.y"
- {
- (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
- ;}
- break;
-
- case 39:
-#line 301 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 40:
-#line 308 "dtc-parser.y"
- {
- (yyval.nodelist) = NULL;
- ;}
- break;
-
- case 41:
-#line 312 "dtc-parser.y"
- {
- (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
- ;}
- break;
-
- case 42:
-#line 316 "dtc-parser.y"
- {
- yyerror("syntax error: properties must precede subnodes");
- YYERROR;
- ;}
- break;
-
- case 43:
-#line 324 "dtc-parser.y"
- {
- (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
- ;}
- break;
-
- case 44:
-#line 331 "dtc-parser.y"
- {
- (yyval.labelref) = NULL;
- ;}
- break;
-
- case 45:
-#line 335 "dtc-parser.y"
- {
- (yyval.labelref) = (yyvsp[(1) - (1)].labelref);
- ;}
- break;
-
-
-/* Line 1267 of yacc.c. */
-#line 1780 "dtc-parser.tab.c"
- default: break;
- }
- YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
-
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
- *++yylsp = yyloc;
-
- /* Now `shift' the result of the reduction. Determine what state
- that goes to, based on the state we popped back to and the rule
- number reduced by. */
-
- yyn = yyr1[yyn];
-
- yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
- if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
- yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
-
-/*------------------------------------.
-| yyerrlab -- here on detecting error |
-`------------------------------------*/
-yyerrlab:
- /* If not already recovering from an error, report this error. */
- if (!yyerrstatus)
- {
- ++yynerrs;
-#if ! YYERROR_VERBOSE
- yyerror (YY_("syntax error"));
-#else
- {
- YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
- if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
- {
- YYSIZE_T yyalloc = 2 * yysize;
- if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
- yyalloc = YYSTACK_ALLOC_MAXIMUM;
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
- yymsg = (char *) YYSTACK_ALLOC (yyalloc);
- if (yymsg)
- yymsg_alloc = yyalloc;
- else
- {
- yymsg = yymsgbuf;
- yymsg_alloc = sizeof yymsgbuf;
- }
- }
-
- if (0 < yysize && yysize <= yymsg_alloc)
- {
- (void) yysyntax_error (yymsg, yystate, yychar);
- yyerror (yymsg);
- }
- else
- {
- yyerror (YY_("syntax error"));
- if (yysize != 0)
- goto yyexhaustedlab;
- }
- }
-#endif
- }
-
- yyerror_range[0] = yylloc;
-
- if (yyerrstatus == 3)
- {
- /* If just tried and failed to reuse look-ahead token after an
- error, discard it. */
-
- if (yychar <= YYEOF)
- {
- /* Return failure if at end of input. */
- if (yychar == YYEOF)
- YYABORT;
- }
- else
- {
- yydestruct ("Error: discarding",
- yytoken, &yylval, &yylloc);
- yychar = YYEMPTY;
- }
- }
-
- /* Else will try to reuse look-ahead token after shifting the error
- token. */
- goto yyerrlab1;
-
-
-/*---------------------------------------------------.
-| yyerrorlab -- error raised explicitly by YYERROR. |
-`---------------------------------------------------*/
-yyerrorlab:
-
- /* Pacify compilers like GCC when the user code never invokes
- YYERROR and the label yyerrorlab therefore never appears in user
- code. */
- if (/*CONSTCOND*/ 0)
- goto yyerrorlab;
-
- yyerror_range[0] = yylsp[1-yylen];
- /* Do not reclaim the symbols of the rule which action triggered
- this YYERROR. */
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
- yystate = *yyssp;
- goto yyerrlab1;
-
-
-/*-------------------------------------------------------------.
-| yyerrlab1 -- common code for both syntax error and YYERROR. |
-`-------------------------------------------------------------*/
-yyerrlab1:
- yyerrstatus = 3; /* Each real token shifted decrements this. */
-
- for (;;)
- {
- yyn = yypact[yystate];
- if (yyn != YYPACT_NINF)
- {
- yyn += YYTERROR;
- if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
- {
- yyn = yytable[yyn];
- if (0 < yyn)
- break;
- }
- }
-
- /* Pop the current state because it cannot handle the error token. */
- if (yyssp == yyss)
- YYABORT;
-
- yyerror_range[0] = *yylsp;
- yydestruct ("Error: popping",
- yystos[yystate], yyvsp, yylsp);
- YYPOPSTACK (1);
- yystate = *yyssp;
- YY_STACK_PRINT (yyss, yyssp);
- }
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- *++yyvsp = yylval;
-
- yyerror_range[1] = yylloc;
- /* Using YYLLOC is tempting, but would change the location of
- the look-ahead. YYLOC is available though. */
- YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
- *++yylsp = yyloc;
-
- /* Shift the error token. */
- YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
-
- yystate = yyn;
- goto yynewstate;
-
-
-/*-------------------------------------.
-| yyacceptlab -- YYACCEPT comes here. |
-`-------------------------------------*/
-yyacceptlab:
- yyresult = 0;
- goto yyreturn;
-
-/*-----------------------------------.
-| yyabortlab -- YYABORT comes here. |
-`-----------------------------------*/
-yyabortlab:
- yyresult = 1;
- goto yyreturn;
-
-#ifndef yyoverflow
-/*-------------------------------------------------.
-| yyexhaustedlab -- memory exhaustion comes here. |
-`-------------------------------------------------*/
-yyexhaustedlab:
- yyerror (YY_("memory exhausted"));
- yyresult = 2;
- /* Fall through. */
-#endif
-
-yyreturn:
- if (yychar != YYEOF && yychar != YYEMPTY)
- yydestruct ("Cleanup: discarding lookahead",
- yytoken, &yylval, &yylloc);
- /* Do not reclaim the symbols of the rule which action triggered
- this YYABORT or YYACCEPT. */
- YYPOPSTACK (yylen);
- YY_STACK_PRINT (yyss, yyssp);
- while (yyssp != yyss)
- {
- yydestruct ("Cleanup: popping",
- yystos[*yyssp], yyvsp, yylsp);
- YYPOPSTACK (1);
- }
-#ifndef yyoverflow
- if (yyss != yyssa)
- YYSTACK_FREE (yyss);
-#endif
-#if YYERROR_VERBOSE
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
-#endif
- /* Make sure YYID is used. */
- return YYID (yyresult);
-}
-
-
-#line 340 "dtc-parser.y"
-
-
-void yyerrorf(char const *s, ...)
-{
- const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
- va_list va;
- va_start(va, s);
-
- if (strcmp(fname, "-") == 0)
- fname = "stdin";
-
- fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
- vfprintf(stderr, s, va);
- fprintf(stderr, "\n");
-
- treesource_error = 1;
- va_end(va);
-}
-
-void yyerror (char const *s)
-{
- yyerrorf("%s", s);
-}
-
-static unsigned long long eval_literal(const char *s, int base, int bits)
-{
- unsigned long long val;
- char *e;
-
- errno = 0;
- val = strtoull(s, &e, base);
- if (*e)
- yyerror("bad characters in literal");
- else if ((errno == ERANGE)
- || ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
- else if (errno != 0)
- yyerror("bad literal");
- return val;
-}
-
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
deleted file mode 100644
index ba99100d55c9..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
+++ /dev/null
@@ -1,113 +0,0 @@
-/* A Bison parser, made by GNU Bison 2.3. */
-
-/* Skeleton interface for Bison's Yacc-like parsers in C
-
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- DT_V1 = 258,
- DT_MEMRESERVE = 259,
- DT_PROPNODENAME = 260,
- DT_LITERAL = 261,
- DT_LEGACYLITERAL = 262,
- DT_BASE = 263,
- DT_BYTE = 264,
- DT_STRING = 265,
- DT_LABEL = 266,
- DT_REF = 267,
- DT_INCBIN = 268
- };
-#endif
-/* Tokens. */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
-
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-#line 37 "dtc-parser.y"
-{
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-/* Line 1489 of yacc.c. */
-#line 92 "dtc-parser.tab.h"
- YYSTYPE;
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-extern YYSTYPE yylval;
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
- int first_line;
- int first_column;
- int last_line;
- int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-extern YYLTYPE yylloc;
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y
deleted file mode 100644
index b2ab562420ea..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc-parser.y
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-%locations
-
-%{
-#include <stdio.h>
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern int yylex(void);
-
-extern struct boot_info *the_boot_info;
-extern int treesource_error;
-
-static unsigned long long eval_literal(const char *s, int base, int bits);
-%}
-
-%union {
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-
-%token DT_V1
-%token DT_MEMRESERVE
-%token <propnodename> DT_PROPNODENAME
-%token <literal> DT_LITERAL
-%token <literal> DT_LEGACYLITERAL
-%token <cbase> DT_BASE
-%token <byte> DT_BYTE
-%token <data> DT_STRING
-%token <labelref> DT_LABEL
-%token <labelref> DT_REF
-%token DT_INCBIN
-
-%type <data> propdata
-%type <data> propdataprefix
-%type <re> memreserve
-%type <re> memreserves
-%type <re> v0_memreserve
-%type <re> v0_memreserves
-%type <addr> addr
-%type <data> celllist
-%type <cbase> cellbase
-%type <cell> cellval
-%type <data> bytestring
-%type <prop> propdef
-%type <proplist> proplist
-
-%type <node> devicetree
-%type <node> nodedef
-%type <node> subnode
-%type <nodelist> subnodes
-%type <labelref> label
-
-%%
-
-sourcefile:
- DT_V1 ';' memreserves devicetree
- {
- the_boot_info = build_boot_info($3, $4, 0);
- }
- | v0_memreserves devicetree
- {
- the_boot_info = build_boot_info($1, $2, 0);
- }
- ;
-
-memreserves:
- /* empty */
- {
- $$ = NULL;
- }
- | memreserve memreserves
- {
- $$ = chain_reserve_entry($1, $2);
- }
- ;
-
-memreserve:
- label DT_MEMRESERVE addr addr ';'
- {
- $$ = build_reserve_entry($3, $4, $1);
- }
- ;
-
-v0_memreserves:
- /* empty */
- {
- $$ = NULL;
- }
- | v0_memreserve v0_memreserves
- {
- $$ = chain_reserve_entry($1, $2);
- };
- ;
-
-v0_memreserve:
- memreserve
- {
- $$ = $1;
- }
- | label DT_MEMRESERVE addr '-' addr ';'
- {
- $$ = build_reserve_entry($3, $5 - $3 + 1, $1);
- }
- ;
-
-addr:
- DT_LITERAL
- {
- $$ = eval_literal($1, 0, 64);
- }
- | DT_LEGACYLITERAL
- {
- $$ = eval_literal($1, 16, 64);
- }
- ;
-
-devicetree:
- '/' nodedef
- {
- $$ = name_node($2, "", NULL);
- }
- ;
-
-nodedef:
- '{' proplist subnodes '}' ';'
- {
- $$ = build_node($2, $3);
- }
- ;
-
-proplist:
- /* empty */
- {
- $$ = NULL;
- }
- | proplist propdef
- {
- $$ = chain_property($2, $1);
- }
- ;
-
-propdef:
- label DT_PROPNODENAME '=' propdata ';'
- {
- $$ = build_property($2, $4, $1);
- }
- | label DT_PROPNODENAME ';'
- {
- $$ = build_property($2, empty_data, $1);
- }
- ;
-
-propdata:
- propdataprefix DT_STRING
- {
- $$ = data_merge($1, $2);
- }
- | propdataprefix '<' celllist '>'
- {
- $$ = data_merge($1, $3);
- }
- | propdataprefix '[' bytestring ']'
- {
- $$ = data_merge($1, $3);
- }
- | propdataprefix DT_REF
- {
- $$ = data_add_marker($1, REF_PATH, $2);
- }
- | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file($4.val, &path);
- struct data d = empty_data;
-
- if ($6 != 0)
- if (fseek(file->file, $6, SEEK_SET) != 0)
- yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
- (unsigned long long)$6,
- $4.val, strerror(errno));
-
- d = data_copy_file(file->file, $8);
-
- $$ = data_merge($1, d);
- dtc_close_file(file);
- }
- | propdataprefix DT_INCBIN '(' DT_STRING ')'
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file($4.val, &path);
- struct data d = empty_data;
-
- d = data_copy_file(file->file, -1);
-
- $$ = data_merge($1, d);
- dtc_close_file(file);
- }
- | propdata DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-propdataprefix:
- /* empty */
- {
- $$ = empty_data;
- }
- | propdata ','
- {
- $$ = $1;
- }
- | propdataprefix DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-celllist:
- /* empty */
- {
- $$ = empty_data;
- }
- | celllist cellval
- {
- $$ = data_append_cell($1, $2);
- }
- | celllist DT_REF
- {
- $$ = data_append_cell(data_add_marker($1, REF_PHANDLE,
- $2), -1);
- }
- | celllist DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-cellbase:
- /* empty */
- {
- $$ = 16;
- }
- | DT_BASE
- ;
-
-cellval:
- DT_LITERAL
- {
- $$ = eval_literal($1, 0, 32);
- }
- | cellbase DT_LEGACYLITERAL
- {
- $$ = eval_literal($2, $1, 32);
- }
- ;
-
-bytestring:
- /* empty */
- {
- $$ = empty_data;
- }
- | bytestring DT_BYTE
- {
- $$ = data_append_byte($1, $2);
- }
- | bytestring DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-subnodes:
- /* empty */
- {
- $$ = NULL;
- }
- | subnode subnodes
- {
- $$ = chain_node($1, $2);
- }
- | subnode propdef
- {
- yyerror("syntax error: properties must precede subnodes");
- YYERROR;
- }
- ;
-
-subnode:
- label DT_PROPNODENAME nodedef
- {
- $$ = name_node($3, $2, $1);
- }
- ;
-
-label:
- /* empty */
- {
- $$ = NULL;
- }
- | DT_LABEL
- {
- $$ = $1;
- }
- ;
-
-%%
-
-void yyerrorf(char const *s, ...)
-{
- const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
- va_list va;
- va_start(va, s);
-
- if (strcmp(fname, "-") == 0)
- fname = "stdin";
-
- fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
- vfprintf(stderr, s, va);
- fprintf(stderr, "\n");
-
- treesource_error = 1;
- va_end(va);
-}
-
-void yyerror (char const *s)
-{
- yyerrorf("%s", s);
-}
-
-static unsigned long long eval_literal(const char *s, int base, int bits)
-{
- unsigned long long val;
- char *e;
-
- errno = 0;
- val = strtoull(s, &e, base);
- if (*e)
- yyerror("bad characters in literal");
- else if ((errno == ERANGE)
- || ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
- else if (errno != 0)
- yyerror("bad literal");
- return val;
-}
diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c
deleted file mode 100644
index d8fd43b4ac1a..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-#include "version_gen.h"
-
-/*
- * Command line options
- */
-int quiet; /* Level of quietness */
-int reservenum; /* Number of memory reservation slots */
-int minsize; /* Minimum blob size */
-int padsize; /* Additional padding to blob */
-
-char *join_path(const char *path, const char *name)
-{
- int lenp = strlen(path);
- int lenn = strlen(name);
- int len;
- int needslash = 1;
- char *str;
-
- len = lenp + lenn + 2;
- if ((lenp > 0) && (path[lenp-1] == '/')) {
- needslash = 0;
- len--;
- }
-
- str = xmalloc(len);
- memcpy(str, path, lenp);
- if (needslash) {
- str[lenp] = '/';
- lenp++;
- }
- memcpy(str+lenp, name, lenn+1);
- return str;
-}
-
-static void fill_fullpaths(struct node *tree, const char *prefix)
-{
- struct node *child;
- const char *unit;
-
- tree->fullpath = join_path(prefix, tree->name);
-
- unit = strchr(tree->name, '@');
- if (unit)
- tree->basenamelen = unit - tree->name;
- else
- tree->basenamelen = strlen(tree->name);
-
- for_each_child(tree, child)
- fill_fullpaths(child, tree->fullpath);
-}
-
-static void __attribute__ ((noreturn)) usage(void)
-{
- fprintf(stderr, "Usage:\n");
- fprintf(stderr, "\tdtc [options] <input file>\n");
- fprintf(stderr, "\nOptions:\n");
- fprintf(stderr, "\t-h\n");
- fprintf(stderr, "\t\tThis help text\n");
- fprintf(stderr, "\t-q\n");
- fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n");
- fprintf(stderr, "\t-I <input format>\n");
- fprintf(stderr, "\t\tInput formats are:\n");
- fprintf(stderr, "\t\t\tdts - device tree source text\n");
- fprintf(stderr, "\t\t\tdtb - device tree blob\n");
- fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n");
- fprintf(stderr, "\t-o <output file>\n");
- fprintf(stderr, "\t-O <output format>\n");
- fprintf(stderr, "\t\tOutput formats are:\n");
- fprintf(stderr, "\t\t\tdts - device tree source text\n");
- fprintf(stderr, "\t\t\tdtb - device tree blob\n");
- fprintf(stderr, "\t\t\tasm - assembler source\n");
- fprintf(stderr, "\t-V <output version>\n");
- fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION);
- fprintf(stderr, "\t-R <number>\n");
- fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n");
- fprintf(stderr, "\t-S <bytes>\n");
- fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n");
- fprintf(stderr, "\t-p <bytes>\n");
- fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n");
- fprintf(stderr, "\t-b <number>\n");
- fprintf(stderr, "\t\tSet the physical boot cpu\n");
- fprintf(stderr, "\t-f\n");
- fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
- fprintf(stderr, "\t-v\n");
- fprintf(stderr, "\t\tPrint DTC version and exit\n");
- exit(3);
-}
-
-int main(int argc, char *argv[])
-{
- struct boot_info *bi;
- const char *inform = "dts";
- const char *outform = "dts";
- const char *outname = "-";
- int force = 0, check = 0;
- const char *arg;
- int opt;
- FILE *outf = NULL;
- int outversion = DEFAULT_FDT_VERSION;
- long long cmdline_boot_cpuid = -1;
-
- quiet = 0;
- reservenum = 0;
- minsize = 0;
- padsize = 0;
-
- while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) {
- switch (opt) {
- case 'I':
- inform = optarg;
- break;
- case 'O':
- outform = optarg;
- break;
- case 'o':
- outname = optarg;
- break;
- case 'V':
- outversion = strtol(optarg, NULL, 0);
- break;
- case 'R':
- reservenum = strtol(optarg, NULL, 0);
- break;
- case 'S':
- minsize = strtol(optarg, NULL, 0);
- break;
- case 'p':
- padsize = strtol(optarg, NULL, 0);
- break;
- case 'f':
- force = 1;
- break;
- case 'c':
- check = 1;
- break;
- case 'q':
- quiet++;
- break;
- case 'b':
- cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
- break;
- case 'v':
- printf("Version: %s\n", DTC_VERSION);
- exit(0);
- case 'h':
- default:
- usage();
- }
- }
-
- if (argc > (optind+1))
- usage();
- else if (argc < (optind+1))
- arg = "-";
- else
- arg = argv[optind];
-
- /* minsize and padsize are mutually exclusive */
- if (minsize && padsize)
- die("Can't set both -p and -S\n");
-
- fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
- inform, outform, arg);
-
- if (streq(inform, "dts"))
- bi = dt_from_source(arg);
- else if (streq(inform, "fs"))
- bi = dt_from_fs(arg);
- else if(streq(inform, "dtb"))
- bi = dt_from_blob(arg);
- else
- die("Unknown input format \"%s\"\n", inform);
-
- if (cmdline_boot_cpuid != -1)
- bi->boot_cpuid_phys = cmdline_boot_cpuid;
-
- fill_fullpaths(bi->dt, "");
- process_checks(force, bi);
-
-
- if (streq(outname, "-")) {
- outf = stdout;
- } else {
- outf = fopen(outname, "w");
- if (! outf)
- die("Couldn't open output file %s: %s\n",
- outname, strerror(errno));
- }
-
- if (streq(outform, "dts")) {
- dt_to_source(outf, bi);
- } else if (streq(outform, "dtb")) {
- dt_to_blob(outf, bi, outversion);
- } else if (streq(outform, "asm")) {
- dt_to_asm(outf, bi, outversion);
- } else if (streq(outform, "null")) {
- /* do nothing */
- } else {
- die("Unknown output format \"%s\"\n", outform);
- }
-
- exit(0);
-}
diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h
deleted file mode 100644
index 08d54c870086..000000000000
--- a/arch/powerpc/boot/dtc-src/dtc.h
+++ /dev/null
@@ -1,246 +0,0 @@
-#ifndef _DTC_H
-#define _DTC_H
-
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <ctype.h>
-#include <errno.h>
-#include <unistd