aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-class-cxl7
-rw-r--r--Documentation/arm/stm32/overview.txt3
-rw-r--r--Documentation/arm/stm32/stm32f746-overview.txt34
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/shmobile.txt14
-rw-r--r--Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt23
-rw-r--r--Documentation/devicetree/bindings/ipmi/ipmi-smic.txt (renamed from Documentation/devicetree/bindings/ipmi.txt)0
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt4
-rw-r--r--Documentation/devicetree/bindings/timer/jcore,pit.txt24
-rw-r--r--Documentation/filesystems/proc.txt26
10 files changed, 108 insertions, 33 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 4ba0a2a61926..640f65e79ef1 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -220,8 +220,11 @@ What: /sys/class/cxl/<card>/reset
Date: October 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: write only
- Writing 1 will issue a PERST to card which may cause the card
- to reload the FPGA depending on load_image_on_perst.
+ Writing 1 will issue a PERST to card provided there are no
+ contexts active on any one of the card AFUs. This may cause
+ the card to reload the FPGA depending on load_image_on_perst.
+ Writing -1 will do a force PERST irrespective of any active
+ contexts on the card AFUs.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
index 09aed5588d7c..a03b0357c017 100644
--- a/Documentation/arm/stm32/overview.txt
+++ b/Documentation/arm/stm32/overview.txt
@@ -5,7 +5,8 @@ Introduction
------------
The STMicroelectronics family of Cortex-M based MCUs are supported by the
- 'STM32' platform of ARM Linux. Currently only the STM32F429 is supported.
+ 'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
+ and STM32F746 (Cortex-M7) are supported.
Configuration
diff --git a/Documentation/arm/stm32/stm32f746-overview.txt b/Documentation/arm/stm32/stm32f746-overview.txt
new file mode 100644
index 000000000000..cffd2b1ccd6f
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.txt
@@ -0,0 +1,34 @@
+ STM32F746 Overview
+ ==================
+
+ Introduction
+ ------------
+ The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+ It features:
+ - Cortex-M7 core running up to @216MHz
+ - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+ - FMC controller to connect SDRAM, NOR and NAND memories
+ - Dual mode QSPI
+ - SD/MMC/SDIO support
+ - Ethernet controller
+ - USB OTFG FS & HS controllers
+ - I2C, SPI, CAN busses support
+ - Several 16 & 32 bits general purpose timers
+ - Serial Audio interface
+ - LCD controller
+ - HDMI-CEC
+ - SPDIFRX
+
+ Resources
+ ---------
+ Datasheet and reference manual are publicly available on ST website:
+ - http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+ Document Author
+ ---------------
+ Alexandre Torgue <alexandre.torgue@st.com>
+
+
+
+
+
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index f53e2ee65e35..454b1bec7542 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -86,6 +86,9 @@ SoCs:
- DRA722
compatible = "ti,dra722", "ti,dra72", "ti,dra7"
+- DRA718
+ compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
+
- AM5728
compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
@@ -181,6 +184,9 @@ Boards:
- DRA722 EVM: Software Development Board for DRA722
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
+- DRA718 EVM: Software Development Board for DRA718
+ compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
+
- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 2f0b7169f132..3c7acf22957a 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -13,6 +13,10 @@ SoCs:
compatible = "renesas,r8a73a4"
- R-Mobile A1 (R8A77400)
compatible = "renesas,r8a7740"
+ - RZ/G1M (R8A77430)
+ compatible = "renesas,r8a7743"
+ - RZ/G1E (R8A77450)
+ compatible = "renesas,r8a7745"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
@@ -35,7 +39,7 @@ SoCs:
Boards:
- - Alt
+ - Alt (RTP0RC7794SEB00010S)
compatible = "renesas,alt", "renesas,r8a7794"
- APE6-EVM
compatible = "renesas,ape6evm", "renesas,r8a73a4"
@@ -47,7 +51,7 @@ Boards:
compatible = "renesas,bockw", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- - Gose
+ - Gose (RTP0RC7793SEB00010S)
compatible = "renesas,gose", "renesas,r8a7793"
- H3ULCB (RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
@@ -61,7 +65,7 @@ Boards:
compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
- - Marzen
+ - Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,porter", "renesas,r8a7791"
@@ -73,5 +77,9 @@ Boards:
compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
+ - SK-RZG1E (YR8A77450S000BE)
+ compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
+ - SK-RZG1M (YR8A77430S000BE)
+ compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- Wheat
compatible = "renesas,wheat", "renesas,r8a7792"
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
new file mode 100644
index 000000000000..fbbacd958240
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
@@ -0,0 +1,23 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+ interrupt, the driver will operate in poll mode.
+
+Example:
+
+ ibt@1e789140 {
+ compatible = "aspeed,ast2400-bt-bmc";
+ reg = <0x1e789140 0x18>;
+ interrupts = <8>;
+ };
diff --git a/Documentation/devicetree/bindings/ipmi.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
index d5f1a877ed3e..d5f1a877ed3e 100644
--- a/Documentation/devicetree/bindings/ipmi.txt
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 5e60ad18f147..2ad18c4ea55c 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
+RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
+TIMER7 TIMER8 VGABIOSROM
+
Examples:
diff --git a/Documentation/devicetree/bindings/timer/jcore,pit.txt b/Documentation/devicetree/bindings/timer/jcore,pit.txt
new file mode 100644
index 000000000000..af5dd35469d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/jcore,pit.txt
@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+ there should be one region per cpu, indexed by the sequential,
+ zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+ core is integrated with the aic and allows the timer interrupt
+ assignment to be programmed by software, but this property is
+ required in order to reserve an interrupt number that doesn't
+ conflict with other devices.
+
+
+Example:
+
+timer@200 {
+ compatible = "jcore,pit";
+ reg = < 0x200 0x30 0x500 0x30 >;
+ interrupts = < 0x48 >;
+};
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 219ffd41a911..74329fd0add2 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -395,32 +395,6 @@ is not associated with a file:
or if empty, the mapping is anonymous.
-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
-of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. Hence, for the example above, the
-task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
-
-08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
-08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
-0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
-a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
-a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack]
-a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
-a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
-a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
-a800b000-a800e000 rw-p 00000000 00:00 0
-a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
-a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
-a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
-a8024000-a8027000 rw-p 00000000 00:00 0
-a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
-a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
-a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
-aff35000-aff4a000 rw-p 00000000 00:00 0
-ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
-
The /proc/PID/smaps is an extension based on maps, showing the memory
consumption for each of the process's mappings. For each of mappings there
is a series of lines such as the following: