aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2018-08-29 15:06:31 +0200
committerWolfram Sang <wsa@the-dreams.de>2018-08-30 23:02:13 +0200
commit9d9a152ebaa86a9dede4624919566483c955d0a7 (patch)
tree96177e0d794d220c46dedafed9c5d00c0a9d292e
parent7fd6d98b89f382d414e1db528e29a67bbd749457 (diff)
downloadlinux-stericsson-9d9a152ebaa86a9dede4624919566483c955d0a7.tar.gz
i2c: designware: Re-init controllers with pm_disabled set on resume
On Bay Trail and Cherry Trail devices we set the pm_disabled flag for I2C busses which the OS shares with the PUNIT as these need special handling. Until now we called dev_pm_syscore_device(dev, true) for I2C controllers with this flag set to keep these I2C controllers always on. After commit 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation"), this no longer works. This commit modifies lpss_iosf_exit_d3_state() to only run if lpss_iosf_enter_d3_state() has ran before it, so that it does not run on a resume from hibernate (or from S3). On these systems the conditions for lpss_iosf_enter_d3_state() to run never become true, so lpss_iosf_exit_d3_state() never gets called and the 2 LPSS DMA controllers never get forced into D0 mode, instead they are left in their default automatic power-on when needed mode. The not forcing of D0 mode for the DMA controllers enables these systems to properly enter S0ix modes, which is a good thing. But after entering S0ix modes the I2C controller connected to the PMIC no longer works, leading to e.g. broken battery monitoring. The _PS3 method for this I2C controller looks like this: Method (_PS3, 0, NotSerialized) // _PS3: Power State 3 { If ((((PMID == 0x04) || (PMID == 0x05)) || (PMID == 0x06))) { Return (Zero) } PSAT |= 0x03 Local0 = PSAT /* \_SB_.I2C5.PSAT */ } Where PMID = 0x05, so we enter the Return (Zero) path on these systems. So even if we were to not call dev_pm_syscore_device(dev, true) the I2C controller will be left in D0 rather then be switched to D3. Yet on other Bay and Cherry Trail devices S0ix is not entered unless *all* I2C controllers are in D3 mode. This combined with the I2C controller no longer working now that we reach S0ix states on these systems leads to me believing that the PUNIT itself puts the I2C controller in D3 when all other conditions for entering S0ix states are true. Since now the I2C controller is put in D3 over a suspend/resume we must re-initialize it afterwards and that does indeed fix it no longer working. This commit implements this fix by: 1) Making the suspend_late callback a no-op if pm_disabled is set and making the resume_early callback skip the clock re-enable (since it now was not disabled) while still doing the necessary I2C controller re-init. 2) Removing the dev_pm_syscore_device(dev, true) call, so that the suspend and resume callbacks are actually called. Normally this would cause the ACPI pm code to call _PS3 putting the I2C controller in D3, wreaking havoc since it is shared with the PUNIT, but in this special case the _PS3 method is a no-op so we can safely allow a "fake" suspend / resume. Fixes: 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200861 Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c1
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c7
2 files changed, 6 insertions, 2 deletions
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index e18442b9973a..94d94b4a9a0d 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -708,7 +708,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
i2c_set_adapdata(adap, dev);
if (dev->pm_disabled) {
- dev_pm_syscore_device(dev->dev, true);
irq_flags = IRQF_NO_SUSPEND;
} else {
irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1a8d2da5b000..b5750fd85125 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -434,6 +434,9 @@ static int dw_i2c_plat_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+ if (i_dev->pm_disabled)
+ return 0;
+
i_dev->disable(i_dev);
i2c_dw_prepare_clk(i_dev, false);
@@ -444,7 +447,9 @@ static int dw_i2c_plat_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
- i2c_dw_prepare_clk(i_dev, true);
+ if (!i_dev->pm_disabled)
+ i2c_dw_prepare_clk(i_dev, true);
+
i_dev->init(i_dev);
return 0;