aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-08-13 12:30:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-08-13 12:30:17 -0700
commitdd95f1860768e340875d6a325df18d73f2dea304 (patch)
treebdb1fe0e1b77c393d4bfb0c3e8f389f328b94364
parent10cec917d0008b3457088f2619ac7331adb4b743 (diff)
parentcef988642cdac44e910a27cb6e8166c96f86a0df (diff)
downloadlinux-stericsson-dd95f1860768e340875d6a325df18d73f2dea304.tar.gz
Merge tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code
-rw-r--r--drivers/iio/accel/bmc150-accel-core.c9
-rw-r--r--drivers/iio/accel/st_accel_core.c32
-rw-r--r--drivers/iio/adc/aspeed_adc.c26
-rw-r--r--drivers/iio/adc/axp288_adc.c42
-rw-r--r--drivers/iio/adc/sun4i-gpadc-iio.c3
-rw-r--r--drivers/iio/adc/vf610_adc.c2
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c29
-rw-r--r--drivers/iio/light/tsl2563.c2
-rw-r--r--drivers/iio/pressure/st_pressure_core.c2
-rw-r--r--drivers/staging/comedi/comedi_fops.c3
-rw-r--r--drivers/staging/iio/resolver/ad2s1210.c2
-rw-r--r--include/linux/iio/common/st_sensors.h7
-rw-r--r--include/linux/platform_data/st_sensors_pdata.h2
13 files changed, 146 insertions, 15 deletions
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 6b5d3be283c4..807299dd45eb 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -193,7 +193,6 @@ struct bmc150_accel_data {
struct regmap *regmap;
int irq;
struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
- atomic_t active_intr;
struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
struct mutex mutex;
u8 fifo_mode, watermark;
@@ -493,11 +492,6 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
goto out_fix_power_state;
}
- if (state)
- atomic_inc(&data->active_intr);
- else
- atomic_dec(&data->active_intr);
-
return 0;
out_fix_power_state:
@@ -1710,8 +1704,7 @@ static int bmc150_accel_resume(struct device *dev)
struct bmc150_accel_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
- if (atomic_read(&data->active_intr))
- bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+ bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
bmc150_accel_fifo_set_mode(data);
mutex_unlock(&data->mutex);
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 07d1489cd457..e44f62bf9caa 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -166,6 +166,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_ihl = 0x02,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
.multi_read_bit = true,
.bootime = 2,
},
@@ -234,6 +238,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
.multi_read_bit = true,
.bootime = 2,
},
@@ -316,6 +324,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.en_mask = 0x08,
},
},
+ .sim = {
+ .addr = 0x24,
+ .value = BIT(0),
+ },
.multi_read_bit = false,
.bootime = 2,
},
@@ -379,6 +391,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_int1 = 0x04,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
+ .sim = {
+ .addr = 0x21,
+ .value = BIT(1),
+ },
.multi_read_bit = true,
.bootime = 2, /* guess */
},
@@ -437,6 +453,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
+ .sim = {
+ .addr = 0x21,
+ .value = BIT(7),
+ },
.multi_read_bit = false,
.bootime = 2, /* guess */
},
@@ -499,6 +519,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.addr_ihl = 0x22,
.mask_ihl = 0x80,
},
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
.multi_read_bit = true,
.bootime = 2,
},
@@ -547,6 +571,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_int1 = 0x04,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
+ .sim = {
+ .addr = 0x21,
+ .value = BIT(1),
+ },
.multi_read_bit = false,
.bootime = 2,
},
@@ -614,6 +642,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask_ihl = 0x02,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
.multi_read_bit = true,
.bootime = 2,
},
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index e0ea411a0b2d..c02b23d675cb 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -22,6 +22,7 @@
#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
+#include <linux/iopoll.h>
#define ASPEED_RESOLUTION_BITS 10
#define ASPEED_CLOCKS_PER_SAMPLE 12
@@ -38,11 +39,17 @@
#define ASPEED_ENGINE_ENABLE BIT(0)
+#define ASPEED_ADC_CTRL_INIT_RDY BIT(8)
+
+#define ASPEED_ADC_INIT_POLLING_TIME 500
+#define ASPEED_ADC_INIT_TIMEOUT 500000
+
struct aspeed_adc_model_data {
const char *model_name;
unsigned int min_sampling_rate; // Hz
unsigned int max_sampling_rate; // Hz
unsigned int vref_voltage; // mV
+ bool wait_init_sequence;
};
struct aspeed_adc_data {
@@ -211,6 +218,24 @@ static int aspeed_adc_probe(struct platform_device *pdev)
goto scaler_error;
}
+ model_data = of_device_get_match_data(&pdev->dev);
+
+ if (model_data->wait_init_sequence) {
+ /* Enable engine in normal mode. */
+ writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+
+ /* Wait for initial sequence complete. */
+ ret = readl_poll_timeout(data->base + ASPEED_REG_ENGINE_CONTROL,
+ adc_engine_control_reg_val,
+ adc_engine_control_reg_val &
+ ASPEED_ADC_CTRL_INIT_RDY,
+ ASPEED_ADC_INIT_POLLING_TIME,
+ ASPEED_ADC_INIT_TIMEOUT);
+ if (ret)
+ goto scaler_error;
+ }
+
/* Start all channels in normal mode. */
ret = clk_prepare_enable(data->clk_scaler->clk);
if (ret)
@@ -274,6 +299,7 @@ static const struct aspeed_adc_model_data ast2500_model_data = {
.vref_voltage = 1800, // mV
.min_sampling_rate = 1,
.max_sampling_rate = 1000000,
+ .wait_init_sequence = true,
};
static const struct of_device_id aspeed_adc_matches[] = {
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 64799ad7ebad..462a99c13e7a 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -28,6 +28,8 @@
#include <linux/iio/driver.h>
#define AXP288_ADC_EN_MASK 0xF1
+#define AXP288_ADC_TS_PIN_GPADC 0xF2
+#define AXP288_ADC_TS_PIN_ON 0xF3
enum axp288_adc_id {
AXP288_ADC_TS,
@@ -121,6 +123,26 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
return IIO_VAL_INT;
}
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+ unsigned long address)
+{
+ int ret;
+
+ /* channels other than GPADC do not need to switch TS pin */
+ if (address != AXP288_GP_ADC_H)
+ return 0;
+
+ ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+ if (ret)
+ return ret;
+
+ /* When switching to the GPADC pin give things some time to settle */
+ if (mode == AXP288_ADC_TS_PIN_GPADC)
+ usleep_range(6000, 10000);
+
+ return 0;
+}
+
static int axp288_adc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -131,7 +153,16 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
mutex_lock(&indio_dev->mlock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+ chan->address)) {
+ dev_err(&indio_dev->dev, "GPADC mode\n");
+ ret = -EINVAL;
+ break;
+ }
ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+ chan->address))
+ dev_err(&indio_dev->dev, "TS pin restore\n");
break;
default:
ret = -EINVAL;
@@ -141,6 +172,15 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
return ret;
}
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+ /* ADC should be always enabled for internal FG to function */
+ if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+ return -EIO;
+
+ return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
static const struct iio_info axp288_adc_iio_info = {
.read_raw = &axp288_adc_read_raw,
.driver_module = THIS_MODULE,
@@ -169,7 +209,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
* Set ADC to enabled state at all time, including system suspend.
* otherwise internal fuel gauge functionality may be affected.
*/
- ret = regmap_write(info->regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+ ret = axp288_adc_set_state(axp20x->regmap);
if (ret) {
dev_err(&pdev->dev, "unable to enable ADC device\n");
return ret;
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 81d4c39e414a..137f577d9432 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -256,6 +256,7 @@ static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
err:
pm_runtime_put_autosuspend(indio_dev->dev.parent);
+ disable_irq(irq);
mutex_unlock(&info->mutex);
return ret;
@@ -365,7 +366,6 @@ static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id)
complete(&info->completion);
out:
- disable_irq_nosync(info->temp_data_irq);
return IRQ_HANDLED;
}
@@ -380,7 +380,6 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
complete(&info->completion);
out:
- disable_irq_nosync(info->fifo_data_irq);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 01fc76f7d660..c168e0db329a 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -77,7 +77,7 @@
#define VF610_ADC_ADSTS_MASK 0x300
#define VF610_ADC_ADLPC_EN 0x80
#define VF610_ADC_ADHSC_EN 0x400
-#define VF610_ADC_REFSEL_VALT 0x100
+#define VF610_ADC_REFSEL_VALT 0x800
#define VF610_ADC_REFSEL_VBG 0x1000
#define VF610_ADC_ADTRG_HARD 0x2000
#define VF610_ADC_AVGS_8 0x4000
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 79c8c7cd70d5..6e6a1ecc99dd 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -550,6 +550,31 @@ out:
}
EXPORT_SYMBOL(st_sensors_read_info_raw);
+static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
+ const struct st_sensor_settings *sensor_settings)
+{
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ struct device_node *np = sdata->dev->of_node;
+ struct st_sensors_platform_data *pdata;
+
+ pdata = (struct st_sensors_platform_data *)sdata->dev->platform_data;
+ if (((np && of_property_read_bool(np, "spi-3wire")) ||
+ (pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) {
+ int err;
+
+ err = sdata->tf->write_byte(&sdata->tb, sdata->dev,
+ sensor_settings->sim.addr,
+ sensor_settings->sim.value);
+ if (err < 0) {
+ dev_err(&indio_dev->dev,
+ "failed to init interface mode\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
int st_sensors_check_device_support(struct iio_dev *indio_dev,
int num_sensors_list,
const struct st_sensor_settings *sensor_settings)
@@ -574,6 +599,10 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
return -ENODEV;
}
+ err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]);
+ if (err < 0)
+ return err;
+
if (sensor_settings[i].wai_addr) {
err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
sensor_settings[i].wai_addr, &wai);
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index e7d4ea75e007..7599693f7fe9 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -626,7 +626,7 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
struct tsl2563_chip *chip = iio_priv(dev_info);
iio_push_event(dev_info,
- IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+ IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_EITHER),
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index aa61ec15c139..f1bce05ffa13 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -456,7 +456,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
- .multi_read_bit = true,
+ .multi_read_bit = false,
.bootime = 2,
},
};
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index ca11be21f64b..34ca7823255d 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2396,6 +2396,7 @@ static ssize_t comedi_write(struct file *file, const char __user *buf,
continue;
}
+ set_current_state(TASK_RUNNING);
wp = async->buf_write_ptr;
n1 = min(n, async->prealloc_bufsz - wp);
n2 = n - n1;
@@ -2528,6 +2529,8 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes,
}
continue;
}
+
+ set_current_state(TASK_RUNNING);
rp = async->buf_read_ptr;
n1 = min(n, async->prealloc_bufsz - rp);
n2 = n - n1;
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index a6a8393d6664..3e00df74b18c 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -472,7 +472,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
long m)
{
struct ad2s1210_state *st = iio_priv(indio_dev);
- bool negative;
+ u16 negative;
int ret = 0;
u16 pos;
s16 vel;
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 497f2b3a5a62..97f1b465d04f 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -105,6 +105,11 @@ struct st_sensor_fullscale {
struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
};
+struct st_sensor_sim {
+ u8 addr;
+ u8 value;
+};
+
/**
* struct st_sensor_bdu - ST sensor device block data update
* @addr: address of the register.
@@ -197,6 +202,7 @@ struct st_sensor_transfer_function {
* @bdu: Block data update register.
* @das: Data Alignment Selection register.
* @drdy_irq: Data ready register of the sensor.
+ * @sim: SPI serial interface mode register of the sensor.
* @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
* @bootime: samples to discard when sensor passing from power-down to power-up.
*/
@@ -213,6 +219,7 @@ struct st_sensor_settings {
struct st_sensor_bdu bdu;
struct st_sensor_das das;
struct st_sensor_data_ready_irq drdy_irq;
+ struct st_sensor_sim sim;
bool multi_read_bit;
unsigned int bootime;
};
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
index 79b0e4cdb814..f8274b0c6888 100644
--- a/include/linux/platform_data/st_sensors_pdata.h
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -17,10 +17,12 @@
* Available only for accelerometer and pressure sensors.
* Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
* @open_drain: set the interrupt line to be open drain if possible.
+ * @spi_3wire: enable spi-3wire mode.
*/
struct st_sensors_platform_data {
u8 drdy_int_pin;
bool open_drain;
+ bool spi_3wire;
};
#endif /* ST_SENSORS_PDATA_H */