aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-28 11:32:32 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-28 11:32:32 -0700
commit24b414d5a7d3e6a716350464dfdb44da610ed142 (patch)
treecb2b2ffa7f7feb09fbbab66a4e760a44ebc39f3a
parent4194976b0900efcabbc93cc313ab12abad27d8a8 (diff)
parent7216a4183947853f359b41ba1edb5db9b3091acc (diff)
downloadlinux-stericsson-24b414d5a7d3e6a716350464dfdb44da610ed142.tar.gz
Merge tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown: "A few driver specific fixes, the biggest one being a fix for the newly added Qualcomm SPI controller driver to make it not use its internal chip select due to hardware bugs, replacing it with GPIOs" * tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: qup: Remove chip select function spi: qup: Fix order of spi_register_master spi: sh-sci: fix use-after-free in sh_sci_spi_remove() spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qup.txt6
-rw-r--r--drivers/spi/spi-pxa2xx.c8
-rw-r--r--drivers/spi/spi-qup.c44
-rw-r--r--drivers/spi/spi-sh-sci.c4
4 files changed, 27 insertions, 35 deletions
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
index b82a268f1bd4..bee6ff204baf 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -23,6 +23,12 @@ Optional properties:
- spi-max-frequency: Specifies maximum SPI clock frequency,
Units - Hz. Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+- num-cs: total number of chipselects
+- cs-gpios: should specify GPIOs used for chipselects.
+ The gpios will be referred to as reg = <index> in the SPI child
+ nodes. If unspecified, a single SPI device without a chip
+ select can be used.
+
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index a98df7eeb42d..fe792106bdc5 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -118,6 +118,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
*/
orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
+ /* Test SPI_CS_CONTROL_SW_MODE bit enabling */
value = orig | SPI_CS_CONTROL_SW_MODE;
writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
@@ -126,10 +127,13 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
goto detection_done;
}
- value &= ~SPI_CS_CONTROL_SW_MODE;
+ orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
+
+ /* Test SPI_CS_CONTROL_SW_MODE bit disabling */
+ value = orig & ~SPI_CS_CONTROL_SW_MODE;
writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
- if (value != orig) {
+ if (value != (orig & ~SPI_CS_CONTROL_SW_MODE)) {
offset = 0x800;
goto detection_done;
}
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index fc1de86d3c8a..c08da380cb23 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -424,31 +424,6 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
return 0;
}
-static void spi_qup_set_cs(struct spi_device *spi, bool enable)
-{
- struct spi_qup *controller = spi_master_get_devdata(spi->master);
-
- u32 iocontol, mask;
-
- iocontol = readl_relaxed(controller->base + SPI_IO_CONTROL);
-
- /* Disable auto CS toggle and use manual */
- iocontol &= ~SPI_IO_C_MX_CS_MODE;
- iocontol |= SPI_IO_C_FORCE_CS;
-
- iocontol &= ~SPI_IO_C_CS_SELECT_MASK;
- iocontol |= SPI_IO_C_CS_SELECT(spi->chip_select);
-
- mask = SPI_IO_C_CS_N_POLARITY_0 << spi->chip_select;
-
- if (enable)
- iocontol |= mask;
- else
- iocontol &= ~mask;
-
- writel_relaxed(iocontol, controller->base + SPI_IO_CONTROL);
-}
-
static int spi_qup_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
@@ -571,12 +546,16 @@ static int spi_qup_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ /* use num-cs unless not present or out of range */
+ if (of_property_read_u16(dev->of_node, "num-cs",
+ &master->num_chipselect) ||
+ (master->num_chipselect > SPI_NUM_CHIPSELECTS))
+ master->num_chipselect = SPI_NUM_CHIPSELECTS;
+
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
- master->num_chipselect = SPI_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->max_speed_hz = max_freq;
- master->set_cs = spi_qup_set_cs;
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
@@ -640,16 +619,19 @@ static int spi_qup_probe(struct platform_device *pdev)
if (ret)
goto error;
- ret = devm_spi_register_master(dev, master);
- if (ret)
- goto error;
-
pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+
+ ret = devm_spi_register_master(dev, master);
+ if (ret)
+ goto disable_pm;
+
return 0;
+disable_pm:
+ pm_runtime_disable(&pdev->dev);
error:
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
index 1f56ef651d1a..b83dd733684c 100644
--- a/drivers/spi/spi-sh-sci.c
+++ b/drivers/spi/spi-sh-sci.c
@@ -175,9 +175,9 @@ static int sh_sci_spi_remove(struct platform_device *dev)
{
struct sh_sci_spi *sp = platform_get_drvdata(dev);
- iounmap(sp->membase);
- setbits(sp, PIN_INIT, 0);
spi_bitbang_stop(&sp->bitbang);
+ setbits(sp, PIN_INIT, 0);
+ iounmap(sp->membase);
spi_master_put(sp->bitbang.master);
return 0;
}