aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-20ktest: Reset saved min (force) configs for each testSteven Rostedt
The min configs are saved in a perl hash called force_configs, and this hash is used to add configs to the .config file. But it was not being reset between tests and a min config from a previous test would affect the min config of the next test causing undesirable results. Reset the force_config hash at the start of each test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add check for bug or panic during rebootSteven Rostedt
Usually the target is booted into a dependable kernel when a test starts. The test will install the test kernel and reboot the box. But there may be a time that the kernel is running an unreliable kernel and the reboot may crash. Have ktest detect crashes on a reboot and force a power-cycle instead. This can usually happen if a test kernel was installed to run manual tests, but the user forgot to reboot to the known good kernel. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add MAX_MONITOR_WAIT optionSteven Rostedt
If the console is constantly outputting content, this can cause ktest to get stuck waiting on the monitor to settle down. The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest to wait for the console to flush. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Fix config bisect with how make oldnoconfig worksSteven Rostedt
With a name like 'oldnoconfig' one may think that the config generated would disable all configs that were not defined (selecting "no" for all options). But this is not the case. It selects the default. If a config has a 'default y', then it is added if not specified. This broke the config bisect, because options not specified by a config will just use the default, where it expected to turn off. This caused an option to be enabled that disabled an option that would break the build. The end result was that we never found the bad config at the end of the test. Instead of using 'make oldnoconfig', ktest now builds the options it expects enabled and disabled. When it turns off an option, it will no longer remove it, but actually set it to: # CONFIG_FOO is not set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add CONFIG_BISECT_CHECK optionSteven Rostedt
The config-bisect can take a bad config and bisect it down to find out what config actually breaks the config. But as all tests will apply a minconfig (defined by a user) to apply before booting, it is possible that the minconfig could actually make the bad config work (minconfigs can disable configs). The end result is that the config bisect test will not find a config that breaks. This can be rather frustrating to the user. The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the bad config (with the minconfig applied) still fails before trying to bisect. And yes, I did get burned by this. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add PRE_INSTALL optionSteven Rostedt
Add the PRE_INSTALL option that will allow a user to specify a shell command to be executed before the install operation executes. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Add PRE/POST_KTEST and TEST optionsSteven Rostedt
In order to let the user add commands before and after ktest runs, the PRE_KTEST and POST_KTEST options are defined. They hold shell commands that will execute befor ktest runs its first test, as well as when it completed its last test. The PRE_TEST and POST_TEST will be run befor and after (respectively) for a given test. They can either be global (done for all tests) or defined by a single test. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19ktest: Remove commented exitSteven Rostedt
A debug 'exit' was left in ktest.pl. Remove it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-14Linux 3.5-rc7Linus Torvalds
2012-07-14blk: fix wrong idr_pre_get() error check in loop.cSilva Paulo
The idr_pre_get() function never returns a value < 0. It returns 0 (no memory) or 1 (OK). Reported-by: Silva Paulo <psdasilva@yahoo.com> [ Rewrote Silva's patch, but attributing it to Silva anyway - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-14Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Containing the regression fixes for USB-audio due to the transition to the new streaming logic, mostly found on Logitech webcams." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: move calls to usb_set_interface ALSA: usb-audio: Fix the first PCM interface assignment
2012-07-14Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI patch from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPICA: Fix possible fault in return package object repair code
2012-07-14vsyscall_64: add missing ifdef CONFIG_SECCOMPWill Drewry
vsyscall_seccomp introduced a dependency on __secure_computing. On configurations with CONFIG_SECCOMP disabled, compilation will fail. Reported-by: feng xiangjun <fengxj325@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-14Merge tag 'cpufreq-for-3.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull cpufreq fix from Rafael Wysocki: "This fixes a regression preventing the ACPI cpufreq driver from loading on some systems where it worked previously without any problems." * tag 'cpufreq-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / ACPI: Fix not loading acpi-cpufreq driver regression
2012-07-14Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Samsung SoC fixes from Arnd Bergmann. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers
2012-07-14Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU, perf, and scheduler fixes from Ingo Molnar. The RCU fix is a revert for an optimization that could cause deadlocks. One of the scheduler commits (164c33c6adee "sched: Fix fork() error path to not crash") is correct but not complete (some architectures like Tile are not covered yet) - the resulting additional fixes are still WIP and Ingo did not want to delay these pending fixes. See this thread on lkml: [PATCH] fork: fix error handling in dup_task() The perf fixes are just trivial oneliners. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf kvm: Fix segfault with report and mixed guestmount use perf kvm: Fix regression with guest machine creation perf script: Fix format regression due to libtraceevent merge ring-buffer: Fix accounting of entries when removing pages ring-buffer: Fix crash due to uninitialized new_pages list head * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS/sched: Update scheduler file pattern sched/nohz: Rewrite and fix load-avg computation -- again sched: Fix fork() error path to not crash
2012-07-14ACPICA: Fix possible fault in return package object repair codeBob Moore
Fixes a problem that can occur when a lone package object is wrapped with an outer package object in order to conform to the ACPI specification. Can affect these predefined names: _ALR,_MLS,_PSS,_TRT,_TSS,_PRT,_HPX,_DLM,_CSD,_PSD,_TSD https://bugzilla.kernel.org/show_bug.cgi?id=44171 This problem was introduced in 3.4-rc1 by commit 6a99b1c94d053b3420eaa4a4bc8b2883dd90a2f9 (ACPICA: Object repair code: Support to add Package wrappers) Reported-by: Vlastimil Babka <caster@gentoo.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: <stable@vger.kernel.org> # 3.4 Signed-off-by: Len Brown <len.brown@intel.com>
2012-07-14Merge branch 'v3.5-samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: * 'v3.5-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-13Merge tag 'md-3.5-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull use-after-free RAID1 bugfix from NeilBrown. * tag 'md-3.5-fixes' of git://neil.brown.name/md: md/raid1: fix use-after-free bug in RAID1 data-check code.
2012-07-13Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the leap second fixes from Thomas Gleixner: "It's a rather large series, but well discussed, refined and reviewed. It got a massive testing by John, Prarit and tip. In theory we could split it into two parts. The first two patches f55a6faa3843: hrtimer: Provide clock_was_set_delayed() 4873fa070ae8: timekeeping: Fix leapsecond triggered load spike issue are merely preventing the stuff loops forever issues, which people have observed. But there is no point in delaying the other 4 commits which achieve full correctness into 3.6 as they are tagged for stable anyway. And I rather prefer to have the full fixes merged in bulk than a "prevent the observable wreckage and deal with the hidden fallout later" approach." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Update hrtimer base offsets each hrtimer_interrupt timekeeping: Provide hrtimer update function hrtimers: Move lock held region in hrtimer_interrupt() timekeeping: Maintain ktime_t based offsets for hrtimers timekeeping: Fix leapsecond triggered load spike issue hrtimer: Provide clock_was_set_delayed()
2012-07-13x86/vsyscall: allow seccomp filter in vsyscall=emulateWill Drewry
If a seccomp filter program is installed, older static binaries and distributions with older libc implementations (glibc 2.13 and earlier) that rely on vsyscall use will be terminated regardless of the filter program policy when executing time, gettimeofday, or getcpu. This is only the case when vsyscall emulation is in use (vsyscall=emulate is the default). This patch emulates system call entry inside a vsyscall=emulate by populating regs->ax and regs->orig_ax with the system call number prior to calling into seccomp such that all seccomp-dependencies function normally. Additionally, system call return behavior is emulated in line with other vsyscall entrypoints for the trace/trap cases. [ v2: fixed ip and sp on SECCOMP_RET_TRAP/TRACE (thanks to luto@mit.edu) ] Reported-and-tested-by: Owen Kibel <qmewlo@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-13Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Please pull one hwmon subsystem fix from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Preserve configuration register bits on init
2012-07-13Merge tag 'nfs-for-3.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFSv4 mount regression - Fix O_DIRECT list manipulation snafus * tag 'nfs-for-3.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix an NFSv4 mount regression NFS: Fix list manipulation snafus in fs/nfs/direct.c
2012-07-13Remove easily user-triggerable BUG from generic_setleaseDave Jones
This can be trivially triggered from userspace by passing in something unexpected. kernel BUG at fs/locks.c:1468! invalid opcode: 0000 [#1] SMP RIP: 0010:generic_setlease+0xc2/0x100 Call Trace: __vfs_setlease+0x35/0x40 fcntl_setlease+0x76/0x150 sys_fcntl+0x1c6/0x810 system_call_fastpath+0x1a/0x1f Signed-off-by: Dave Jones <davej@redhat.com> Cc: stable@kernel.org # 3.2+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "The changes are limited to adding new VID/PID combinations to drivers to enable support for new versions of hardware, most notably hardware found in new MacBook Pro Retina boxes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Andamiro Pump It Up pad Input: xpad - add signature for Razer Onza Tournament Edition Input: xpad - handle all variations of Mad Catz Beat Pad Input: bcm5974 - Add support for 2012 MacBook Pro Retina HID: add support for 2012 MacBook Pro Retina
2012-07-13Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Some regression fixes at the audio part for devices with cx23885/cx25840 - A DMA corruption fix at cx231xx - two fixes at the winbond IR driver - Several fixes for the EXYNOS media driver (s5p) - two fixes at the OMAP3 preview driver - one fix at the dvb core failure path - an include missing (slab.h) at smiapp-core causing compilation breakage - em28xx was not loading the IR driver driver anymore. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits) [media] Revert "[media] V4L: JPEG class documentation corrections" [media] s5p-fimc: Add missing FIMC-LITE file operations locking [media] omap3isp: preview: Fix contrast and brightness handling [media] omap3isp: preview: Fix output size computation depending on input format [media] winbond-cir: Initialise timeout, driver_type and allowed_protos [media] winbond-cir: Fix txandrx module info [media] cx23885: Silence unknown command warnings [media] cx23885: add support for HVR-1255 analog (cx23888 variant) [media] cx23885: make analog support work for HVR_1250 (cx23885 variant) [media] cx25840: fix vsrc/hsrc usage on cx23888 designs [media] cx25840: fix regression in HVR-1800 analog audio [media] cx25840: fix regression in analog support hue/saturation controls [media] cx25840: fix regression in HVR-1800 analog support [media] s5p-mfc: Fixed setup of custom controls in decoder and encoder [media] cx231xx: don't DMA to random addresses [media] em28xx: fix em28xx-rc load [media] dvb-core: Release semaphore on error path dvb_register_device() [media] s5p-fimc: Stop media entity pipeline if fimc_pipeline_validate fails [media] s5p-fimc: Fix compiler warning in fimc-lite.c [media] s5p-fimc: media_entity_pipeline_start() may fail ...
2012-07-13Merge tag 'mmc-fixes-for-3.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - Revert a patch that made failing to select power class fatal; it turns out that it fails non-fatally on Tegra boards. Regression against 3.5-rc1. - Add the IRQF_ONESHOT flag to the cd-gpio driver, which turned into a regression in 3.5-rc1 when IRQF_ONESHOT became required for threaded IRQs with no handler. * tag 'mmc-fixes-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: cd-gpio: pass IRQF_ONESHOT to request_threaded_irq() mmc: core: Revert "skip card initialization if power class selection fails"
2012-07-13Merge tag 'for-linus-20120712' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull late MTD fixes from David Woodhouse: - fix 'sparse warning fix' regression which totally breaks MXC NAND - fix GPMI NAND regression when used with UBI - update/correct sysfs documentation for new 'bitflip_threshold' field - fix nandsim build failure * tag 'for-linus-20120712' of git://git.infradead.org/linux-mtd: mtd: nandsim: don't open code a do_div helper mtd: ABI documentation: clarification of bitflip_threshold mtd: gpmi-nand: fix read page when reading to vmalloced area mtd: mxc_nand: use 32bit copy functions
2012-07-13Merge tag 'mfd-for-linus-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD Fixes from Samuel Ortiz: - Three Palmas fixes, One of them being a build error fix. - Two mc13xx fixes. One for fixing an SPI regmap configuration and another one for working around an i.Mx hardware bug. - One omap-usb regression fix. - One twl6040 build breakage fix. - One file deletion (ab5500-core.h) that was overlooked during the last merge window. * tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Add missing hunk to change palmas irq to clear on read mfd: Fix palmas regulator pdata missing mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. mfd: Update twl6040 Kconfig to avoid build breakage mfd: Delete ab5500-core.h mfd: mc13xxx workaround SPI hardware bug on i.Mx mfd: Fix mc13xxx SPI regmap mfd: Add terminating entry for i2c_device_id palmas table
2012-07-13Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: SH: Convert out[bwl] macros to inline functions sh: Fix up se7721 GPIOLIB=y build warnings.
2012-07-13Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull a couple of KVM fixes from Avi Kivity: "One is an adjustment for an irq layer change that affected device assignment, the other a one-liner ppc fix." * git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm: Fix "PR" KVM implementation of H_CEDE KVM: Fix device assignment threaded irq handler
2012-07-13block: fix infinite loop in __getblk_slowJeff Moyer
Commit 080399aaaf35 ("block: don't mark buffers beyond end of disk as mapped") exposed a bug in __getblk_slow that causes mount to hang as it loops infinitely waiting for a buffer that lies beyond the end of the disk to become uptodate. The problem was initially reported by Torsten Hilbrich here: https://lkml.org/lkml/2012/6/18/54 and also reported independently here: http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511 and then Richard W.M. Jones and Marcos Mello noted a few separate bugzillas also associated with the same issue. This patch has been confirmed to fix: https://bugzilla.redhat.com/show_bug.cgi?id=835019 The main problem is here, in __getblk_slow: for (;;) { struct buffer_head * bh; int ret; bh = __find_get_block(bdev, block, size); if (bh) return bh; ret = grow_buffers(bdev, block, size); if (ret < 0) return NULL; if (ret == 0) free_more_memory(); } __find_get_block does not find the block, since it will not be marked as mapped, and so grow_buffers is called to fill in the buffers for the associated page. I believe the for (;;) loop is there primarily to retry in the case of memory pressure keeping grow_buffers from succeeding. However, we also continue to loop for other cases, like the block lying beond the end of the disk. So, the fix I came up with is to only loop when grow_buffers fails due to memory allocation issues (return value of 0). The attached patch was tested by myself, Torsten, and Rich, and was found to resolve the problem in call cases. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reported-and-Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Josh Boyer <jwboyer@redhat.com> Cc: Stable <stable@vger.kernel.org> # 3.0+ [ Jens is on vacation, taking this directly - Linus ] -- Stable Notes: this patch requires backport to 3.0, 3.2 and 3.3. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-13ARM: S3C24XX: Correct CAMIF interrupt definitionsSylwester Nawrocki
Properly define the CAMIF interrupt resources. This device have two interrupts - corresponding to the "codec" and "preview" data paths. IRQ_CAM is handled internally by the architecture and demultiplexed to IRQ_S3C2440_CAM_C and IRQ_S3C2440_CAM_P - these interrupts only should be handled in the driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Correct AC97 clock control bit for S3C2440Sylwester Nawrocki
Use correct gate control bit for AC97 clock which is S3C2440_CLKCON_AC97, not S3C2440_CLKCON_CAMERA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ALSA: snd-usb: move calls to usb_set_interfaceDaniel Mack
The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams. Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Philipp Dreimann <philipp@dreimann.net> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-12Input: xpad - add Andamiro Pump It Up padYuri Khan
I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by: Yuri Khan <yurivkhan@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-13ARM: SAMSUNG: fix race in s3c_adc_start for ADCTodd Poynor
Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Update default rate for xusbxti clockTushar Behera
The rate of xusbxti clock is set in individual machine files. The default value should be defined at the clock definition and individual machine files should modify it if required. Division by zero in kernel. [<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12) [<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78) Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12hwmon: (it87) Preserve configuration register bits on initJean Delvare
We were accidentally losing one bit in the configuration register on device initialization. It was reported to freeze one specific system right away. Properly preserve all bits we don't explicitly want to change in order to prevent that. Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2012-07-12cpufreq / ACPI: Fix not loading acpi-cpufreq driver regressionThomas Renninger
Commit d640113fe80e45ebd4a5b420b introduced a regression on SMP systems where the processor core with ACPI id zero is disabled (typically should be the case because of hyperthreading). The regression got spread through stable kernels. On 3.0.X it got introduced via 3.0.18. Such platforms may be rare, but do exist. Look out for a disabled processor with acpi_id 0 in dmesg: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled) This problem has been observed on a: HP Proliant BL280c G6 blade This patch restricts the introduced workaround to platforms with nr_cpu_ids <= 1. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-12ARM: EXYNOS: register devices in 'need_restore' state for pm_domainsMarek Szyprowski
Commit ca1d72f033 ('PM / Domains: Make it possible to add devices to inactive domains') introduced possibility to add devices to inactive power domains and added pm_genpd_dev_need_restore() function which lets platform core to notify power domain core that the specified device must be restored (with its runtime_resume() callback) before first use. This patch adds the pm_genpd_dev_need_restore() call what brings back the suspend/resume behaviour for the client devices known from the previous power domain driver (removed by commit 91cfbd4ee0 - 'ARM: EXYNOS: Hook up power domains to generic power domain infrastructure'). Client device drivers relay on that suspend/resume behaviour, thus this patch fixes runtime pm operation for client devices. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12ARM: EXYNOS: read initial state of power domain from hw registersMarek Szyprowski
Some bootloaders disable unused power domains to reduce power consuption. Power domain driver can easily read the actual state from the hardware registers instead of assuming that their initial state is always 'on'. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12SH: Convert out[bwl] macros to inline functionsCorey Minyard
The macros just called BUG(), but that results in unused variable warnings all over the place, like in the IPMI driver. The build regression emails were annoying me, so here's the fix. I have not even compile tested this, but it's rather obvious. [ port type mangled to unsigned long ] Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-11Merge tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev fixes from Florian Tobias Schandinat: "Two fixes for OMAPDSS by Tomi Valkeinen: - one to avoid warnings when runtime PM is not enabled - one workaround to dependancy issues during suspend/resume" * tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n OMAPDSS: Use PM notifiers for system suspend
2012-07-11Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge random patches from Andrew Morton. * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits) memblock: free allocated memblock_reserved_regions later mm: sparse: fix usemap allocation above node descriptor section mm: sparse: fix section usemap placement calculation xtensa: fix incorrect memset shmem: cleanup shmem_add_to_page_cache shmem: fix negative rss in memcg memory.stat tmpfs: revert SEEK_DATA and SEEK_HOLE drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT fat: fix non-atomic NFS i_pos read MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section sgi-xp: nested calls to spin_lock_irqsave() fs: ramfs: file-nommu: add SetPageUptodate() drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails h8300/uaccess: add mising __clear_user() h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user() h8300/time: add missing #include <asm/irq_regs.h> h8300/signal: fix typo "statis" h8300/pgtable: add missing #include <asm-generic/pgtable.h> drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled ...
2012-07-11memblock: free allocated memblock_reserved_regions laterYinghai Lu
memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mm: sparse: fix usemap allocation above node descriptor sectionYinghai Lu
After commit f5bf18fa22f8 ("bootmem/sparsemem: remove limit constraint in alloc_bootmem_section"), usemap allocations may easily be placed outside the optimal section that holds the node descriptor, even if there is space available in that section. This results in unnecessary hotplug dependencies that need to have the node unplugged before the section holding the usemap. The reason is that the bootmem allocator doesn't guarantee a linear search starting from the passed allocation goal but may start out at a much higher address absent an upper limit. Fix this by trying the allocation with the limit at the section end, then retry without if that fails. This keeps the fix from f5bf18fa22f8 of not panicking if the allocation does not fit in the section, but still makes sure to try to stay within the section at first. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.3.x, 3.4.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mm: sparse: fix section usemap placement calculationYinghai Lu
Commit 238305bb4d41 ("mm: remove sparsemem allocation details from the bootmem allocator") introduced a bug in the allocation goal calculation that put section usemaps not in the same section as the node descriptors, creating unnecessary hotplug dependencies between them: node 0 must be removed before remove section 16399 node 1 must be removed before remove section 16399 node 2 must be removed before remove section 16399 node 3 must be removed before remove section 16399 node 4 must be removed before remove section 16399 node 5 must be removed before remove section 16399 node 6 must be removed before remove section 16399 The reason is that it applies PAGE_SECTION_MASK to the physical address of the node descriptor when finding a suitable place to put the usemap, when this mask is actually intended to be used with PFNs. Because the PFN mask is wider, the target address will point beyond the wanted section holding the node descriptor and the node must be offlined before the section holding the usemap can go. Fix this by extending the mask to address width before use. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11xtensa: fix incorrect memsetAlan Cox
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871 Reported-by: <dcb314@hotmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11shmem: cleanup shmem_add_to_page_cacheHugh Dickins
shmem_add_to_page_cache() has three callsites, but only one of them wants the radix_tree_preload() (an exceptional entry guarantees that the radix tree node is present in the other cases), and only that site can achieve mem_cgroup_uncharge_cache_page() (PageSwapCache makes it a no-op in the other cases). We did it this way originally to reflect add_to_page_cache_locked(); but it's confusing now, so move the radix_tree preloading and mem_cgroup uncharging to that one caller. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>