diff options
891 files changed, 53356 insertions, 17338 deletions
diff --git a/Documentation/ABI/testing/sysfs-block-bcache b/Documentation/ABI/testing/sysfs-block-bcache new file mode 100644 index 00000000000..9e4bbc5d51f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-bcache @@ -0,0 +1,156 @@ +What: /sys/block/<disk>/bcache/unregister +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + A write to this file causes the backing device or cache to be + unregistered. If a backing device had dirty data in the cache, + writeback mode is automatically disabled and all dirty data is + flushed before the device is unregistered. Caches unregister + all associated backing devices before unregistering themselves. + +What: /sys/block/<disk>/bcache/clear_stats +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + Writing to this file resets all the statistics for the device. + +What: /sys/block/<disk>/bcache/cache +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a backing device that has cache, a symlink to + the bcache/ dir of that cache. + +What: /sys/block/<disk>/bcache/cache_hits +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: integer number of full cache hits, + counted per bio. A partial cache hit counts as a miss. + +What: /sys/block/<disk>/bcache/cache_misses +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: integer number of cache misses. + +What: /sys/block/<disk>/bcache/cache_hit_ratio +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: cache hits as a percentage. + +What: /sys/block/<disk>/bcache/sequential_cutoff +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: Threshold past which sequential IO will + skip the cache. Read and written as bytes in human readable + units (i.e. echo 10M > sequntial_cutoff). + +What: /sys/block/<disk>/bcache/bypassed +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + Sum of all reads and writes that have bypassed the cache (due + to the sequential cutoff). Expressed as bytes in human + readable units. + +What: /sys/block/<disk>/bcache/writeback +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: When on, writeback caching is enabled and + writes will be buffered in the cache. When off, caching is in + writethrough mode; reads and writes will be added to the + cache but no write buffering will take place. + +What: /sys/block/<disk>/bcache/writeback_running +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: when off, dirty data will not be written + from the cache to the backing device. The cache will still be + used to buffer writes until it is mostly full, at which point + writes transparently revert to writethrough mode. Intended only + for benchmarking/testing. + +What: /sys/block/<disk>/bcache/writeback_delay +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: In writeback mode, when dirty data is + written to the cache and the cache held no dirty data for that + backing device, writeback from cache to backing device starts + after this delay, expressed as an integer number of seconds. + +What: /sys/block/<disk>/bcache/writeback_percent +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For backing devices: If nonzero, writeback from cache to + backing device only takes place when more than this percentage + of the cache is used, allowing more write coalescing to take + place and reducing total number of writes sent to the backing + device. Integer between 0 and 40. + +What: /sys/block/<disk>/bcache/synchronous +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, a boolean that allows synchronous mode to be + switched on and off. In synchronous mode all writes are ordered + such that the cache can reliably recover from unclean shutdown; + if disabled bcache will not generally wait for writes to + complete but if the cache is not shut down cleanly all data + will be discarded from the cache. Should not be turned off with + writeback caching enabled. + +What: /sys/block/<disk>/bcache/discard +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, a boolean allowing discard/TRIM to be turned off + or back on if the device supports it. + +What: /sys/block/<disk>/bcache/bucket_size +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, bucket size in human readable units, as set at + cache creation time; should match the erase block size of the + SSD for optimal performance. + +What: /sys/block/<disk>/bcache/nbuckets +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, the number of usable buckets. + +What: /sys/block/<disk>/bcache/tree_depth +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, height of the btree excluding leaf nodes (i.e. a + one node tree will have a depth of 0). + +What: /sys/block/<disk>/bcache/btree_cache_size +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + Number of btree buckets/nodes that are currently cached in + memory; cache dynamically grows and shrinks in response to + memory pressure from the rest of the system. + +What: /sys/block/<disk>/bcache/written +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, total amount of data in human readable units + written to the cache, excluding all metadata. + +What: /sys/block/<disk>/bcache/btree_written +Date: November 2010 +Contact: Kent Overstreet <kent.overstreet@gmail.com> +Description: + For a cache, sum of all btree writes in human readable units. diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index 938ef71e203..3105644b3bf 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -14,8 +14,7 @@ Description: The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond to each /dev/mtdX character device. These may represent physical/simulated flash devices, partitions on a flash - device, or concatenated flash devices. They exist regardless - of whether CONFIG_MTD_CHAR is actually enabled. + device, or concatenated flash devices. What: /sys/class/mtd/mtdXro/ Date: April 2009 @@ -23,8 +22,7 @@ KernelVersion: 2.6.29 Contact: linux-mtd@lists.infradead.org Description: These directories provide the corresponding read-only device - nodes for /sys/class/mtd/mtdX/ . They are only created - (for the benefit of udev) if CONFIG_MTD_CHAR is enabled. + nodes for /sys/class/mtd/mtdX/ . What: /sys/class/mtd/mtdX/dev Date: April 2009 diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index b0d541042ac..d9be7a97dff 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -66,6 +66,83 @@ the ACPI device explicitly to acpi_platform_device_ids list defined in drivers/acpi/acpi_platform.c. This limitation is only for the platform devices, SPI and I2C devices are created automatically as described below. +DMA support +~~~~~~~~~~~ +DMA controllers enumerated via ACPI should be registered in the system to +provide generic access to their resources. For example, a driver that would +like to be accessible to slave devices via generic API call +dma_request_slave_channel() must register itself at the end of the probe +function like this: + + err = devm_acpi_dma_controller_register(dev, xlate_func, dw); + /* Handle the error if it's not a case of !CONFIG_ACPI */ + +and implement custom xlate function if needed (usually acpi_dma_simple_xlate() +is enough) which converts the FixedDMA resource provided by struct +acpi_dma_spec into the corresponding DMA channel. A piece of code for that case +could look like: + + #ifdef CONFIG_ACPI + struct filter_args { + /* Provide necessary information for the filter_func */ + ... + }; + + static bool filter_func(struct dma_chan *chan, void *param) + { + /* Choose the proper channel */ + ... + } + + static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) + { + dma_cap_mask_t cap; + struct filter_args args; + + /* Prepare arguments for filter_func */ + ... + return dma_request_channel(cap, filter_func, &args); + } + #else + static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) + { + return NULL; + } + #endif + +dma_request_slave_channel() will call xlate_func() for each registered DMA +controller. In the xlate function the proper channel must be chosen based on +information in struct acpi_dma_spec and the properties of the controller +provided by struct acpi_dma. + +Clients must call dma_request_slave_channel() with the string parameter that +corresponds to a specific FixedDMA resource. By default "tx" means the first +entry of the FixedDMA resource array, "rx" means the second entry. The table +below shows a layout: + + Device (I2C0) + { + ... + Method (_CRS, 0, NotSerialized) + { + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x0018, 0x0004, Width32bit, _Y48) + FixedDMA (0x0019, 0x0005, Width32bit, ) + }) + ... + } + } + +So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in +this example. + +In robust cases the client unfortunately needs to call +acpi_dma_request_slave_chan_by_index() directly and therefore choose the +specific FixedDMA resource by its index. + SPI serial bus support ~~~~~~~~~~~~~~~~~~~~~~ Slave devices behind SPI bus have SpiSerialBus resource attached to them. diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt new file mode 100644 index 00000000000..77db8809bd9 --- /dev/null +++ b/Documentation/bcache.txt @@ -0,0 +1,431 @@ +Say you've got a big slow raid 6, and an X-25E or three. Wouldn't it be +nice if you could use them as cache... Hence bcache. + +Wiki and git repositories are at: + http://bcache.evilpiepirate.org + http://evilpiepirate.org/git/linux-bcache.git + http://evilpiepirate.org/git/bcache-tools.git + +It's designed around the performance characteristics of SSDs - it only allocates +in erase block sized buckets, and it uses a hybrid btree/log to track cached +extants (which can be anywhere from a single sector to the bucket size). It's +designed to avoid random writes at all costs; it fills up an erase block +sequentially, then issues a discard before reusing it. + +Both writethrough and writeback caching are supported. Writeback defaults to +off, but can be switched on and off arbitrarily at runtime. Bcache goes to +great lengths to protect your data - it reliably handles unclean shutdown. (It +doesn't even have a notion of a clean shutdown; bcache simply doesn't return +writes as completed until they're on stable storage). + +Writeback caching can use most of the cache for buffering writes - writing +dirty data to the backing device is always done sequentially, scanning from the +start to the end of the index. + +Since random IO is what SSDs excel at, there generally won't be much benefit +to caching large sequential IO. Bcache detects sequential IO and skips it; +it also keeps a rolling average of the IO sizes per task, and as long as the +average is above the cutoff it will skip all IO from that task - instead of +caching the first 512k after every seek. Backups and large file copies should +thus entirely bypass the cache. + +In the event of a data IO error on the flash it will try to recover by reading +from disk or invalidating cache entries. For unrecoverable errors (meta data +or dirty data), caching is automatically disabled; if dirty data was present +in the cache it first disables writeback caching and waits for all dirty data +to be flushed. + +Getting started: +You'll need make-bcache from the bcache-tools repository. Both the cache device +and backing device must be formatted before use. + make-bcache -B /dev/sdb + make-bcache -C /dev/sdc + +make-bcache has the ability to format multiple devices at the same time - if +you format your backing devices and cache device at the same time, you won't +have to manually attach: + make-bcache -B /dev/sda /dev/sdb -C /dev/sdc + +To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register: + + echo /dev/sdb > /sys/fs/bcache/register + echo /dev/sdc > /sys/fs/bcache/register + +To register your bcache devices automatically, you could add something like +this to an init script: + + echo /dev/sd* > /sys/fs/bcache/register_quiet + +It'll look for bcache superblocks and ignore everything that doesn't have one. + +Registering the backing device makes the bcache show up in /dev; you can now +format it and use it as normal. But the first time using a new bcache device, +it'll be running in passthrough mode until you attach it to a cache. See the +section on attaching. + +The devices show up at /dev/bcacheN, and can be controlled via sysfs from +/sys/block/bcacheN/bcache: + + mkfs.ext4 /dev/bcache0 + mount /dev/bcache0 /mnt + +Cache devices are managed as sets; multiple caches per set isn't supported yet +but will allow for mirroring of metadata and dirty data in the future. Your new +cache set shows up as /sys/fs/bcache/<UUID> + +ATTACHING: + +After your cache device and backing device are registered, the backing device +must be attached to your cache set to enable caching. Attaching a backing +device to a cache set is done thusly, with the UUID of the cache set in +/sys/fs/bcache: + + echo <UUID> > /sys/block/bcache0/bcache/attach + +This only has to be done once. The next time you reboot, just reregister all +your bcache devices. If a backing device has data in a cache somewhere, the +/dev/bcache# device won't be created until the cache shows up - particularly +important if you have writeback caching turned on. + +If you're booting up and your cache device is gone and never coming back, you +can force run the backing device: + + echo 1 > /sys/block/sdb/bcache/running + +(You need to use /sys/block/sdb (or whatever your backing device is called), not +/sys/block/bcache0, because bcache0 doesn't exist yet. If you're using a +partition, the bcache directory would be at /sys/block/sdb/sdb2/bcache) + +The backing device will still use that cache set if it shows up in the future, +but all the cached data will be invalidated. If there was dirty data in the +cache, don't expect the filesystem to be recoverable - you will have massive +filesystem corruption, though ext4's fsck does work miracles. + +ERROR HANDLING: + +Bcache tries to transparently handle IO errors to/from the cache device without +affecting normal operation; if it sees too many errors (the threshold is +configurable, and defaults to 0) it shuts down the cache device and switches all +the backing devices to passthrough mode. + + - For reads from the cache, if they error we just retry the read from the + backing device. + + - For writethrough writes, if the write to the cache errors we just switch to + invalidating the data at that lba in the cache (i.e. the same thing we do for + a write that bypasses the cache) + + - For writeback writes, we currently pass that error back up to the + filesystem/userspace. This could be improved - we could retry it as a write + that skips the cache so we don't have to error the write. + + - When we detach, we first try to flush any dirty data (if we were running in + writeback mode). It currently doesn't do anything intelligent if it fails to + read some of the dirty data, though. + +TROUBLESHOOTING PERFORMANCE: + +Bcache has a bunch of config options and tunables. The defaults are intended to +be reasonable for typical desktop and server workloads, but they're not what you +want for getting the best possible numbers when benchmarking. + + - Bad write performance + + If write performance is not what you expected, you probably wanted to be + running in writeback mode, which isn't the default (not due to a lack of + maturity, but simply because in writeback mode you'll lose data if something + happens to your SSD) + + # echo writeback > /sys/block/bcache0/cache_mode + + - Bad performance, or traffic not going to the SSD that you'd expect + + By default, bcache doesn't cache everything. It tries to skip sequential IO - + because you really want to be caching the random IO, and if you copy a 10 + gigabyte file you probably don't want that pushing 10 gigabytes of randomly + accessed data out of your cache. + + But if you want to benchmark reads from cache, and you start out with fio + writing an 8 gigabyte test file - so you want to disable that. + + # echo 0 > /sys/block/bcache0/bcache/sequential_cutoff + + To set it back to the default (4 mb), do + + # echo 4M > /sys/block/bcache0/bcache/sequential_cutoff + + - Traffic's still going to the spindle/still getting cache misses + + In the real world, SSDs don't always keep up with disks - particularly with + slower SSDs, many disks being cached by one SSD, or mostly sequential IO. So + you want to avoid being bottlenecked by the SSD and having it slow everything + down. + + To avoid that bcache tracks latency to the cache device, and gradually + throttles traffic if the latency exceeds a threshold (it does this by + cranking down the sequential bypass). + + You can disable this if you need to by setting the thresholds to 0: + + # echo 0 > /sys/fs/bcache/<cache set>/congested_read_threshold_us + # echo 0 > /sys/fs/bcache/<cache set>/congested_write_threshold_us + + The default is 2000 us (2 milliseconds) for reads, and 20000 for writes. + + - Still getting cache misses, of the same data + + One last issue that sometimes trips people up is actually an old bug, due to + the way cache coherency is handled for cache misses. If a btree node is full, + a cache miss won't be able to insert a key for the new data and the data + won't be written to the cache. + + In practice this isn't an issue because as soon as a write comes along it'll + cause the btree node to be split, and you need almost no write traffic for + this to not show up enough to be noticable (especially since bcache's btree + nodes are huge and index large regions of the device). But when you're + benchmarking, if you're trying to warm the cache by reading a bunch of data + and there's no other traffic - that can be a problem. + + Solution: warm the cache by doing writes, or use the testing branch (there's + a fix for the issue there). + +SYSFS - BACKING DEVICE: + +attach + Echo the UUID of a cache set to this file to enable caching. + +cache_mode + Can be one of either writethrough, writeback, writearound or none. + +clear_stats + Writing to this file resets the running total stats (not the day/hour/5 minute + decaying versions). + +detach + Write to this file to detach from a cache set. If there is dirty data in the + cache, it will be flushed first. + +dirty_data + Amount of dirty data for this backing device in the cache. Continuously + updated unlike the cache set's version, but may be slightly off. + +label + Name of underlying device. + +readahead + Size of readahead that should be performed. Defaults to 0. If set to e.g. + 1M, it will round cache miss reads up to that size, but without overlapping + existing cache entries. + +running + 1 if bcache is running (i.e. whether the /dev/bcache device exists, whether + it's in passthrough mode or caching). + +sequential_cutoff + A sequential IO will bypass the cache once it passes this threshhold; the + most recent 128 IOs are tracked so sequential IO can be detected even when + it isn't all done at once. + +sequential_merge + If non zero, bcache keeps a list of the last 128 requests submitted to compare + against all new requests to determine which new requests are sequential + continuations of previous requests for the purpose of determining sequential + cutoff. This is necessary if the sequential cutoff value is greater than the + maximum acceptable sequential size for any single request. + +state + The backing device can be in one of four different states: + + no cache: Has never been attached to a cache set. + + clean: Part of a cache set, and there is no cached dirty data. + + dirty: Part of a cache set, and there is cached dirty data. + + inconsistent: The backing device was forcibly run by the user when there was + dirty data cached but the cache set was unavailable; whatever data was on the + backing device has likely been corrupted. + +stop + Write to this file to shut down the bcache device and close the backing + device. + +writeback_delay + When dirty data is written to the cache and it previously did not contain + any, waits some number of seconds before initiating writeback. Defaults to + 30. + +writeback_percent + If nonzero, bcache tries to keep around this percentage of the cache dirty by + throttling background writeback and using a PD controller to smoothly adjust + the rate. + +writeback_rate + Rate in sectors per second - if writeback_percent is nonzero, background + writeback is throttled to this rate. Continuously adjusted by bcache but may + also be set by the user. + +writeback_running + If off, writeback of dirty data will not take place at all. Dirty data will + still be added to the cache until it is mostly full; only meant for + benchmarking. Defaults to on. + +SYSFS - BACKING DEVICE STATS: + +There are directories with these numbers for a running total, as well as +versions that decay over the past day, hour and 5 minutes; they're also +aggregated in the cache set directory as well. + +bypassed + Amount of IO (both reads and writes) that has bypassed the cache + +cache_hits +cache_misses +cache_hit_ratio + Hits and misses are counted per individual IO as bcache sees them; a + partial hit is counted as a miss. + +cache_bypass_hits +cache_bypass_misses + Hits and misses for IO that is intended to skip the cache are still counted, + but broken out here. + +cache_miss_collisions + Counts instances where data was going to be inserted into the cache from a + cache miss, but raced with a write and data was already present (usually 0 + since the synchronization for cache misses was rewritten) + +cache_readaheads + Count of times readahead occured. + +SYSFS - CACHE SET: + +average_key_size + Average data per key in the btree. + +bdev<0..n> + Symlink to each of the attached backing devices. + +block_size + Block size of the cache devices. + +btree_cache_size + Amount of memory currently used by the btree cache + +bucket_size + Size of buckets + +cache<0..n> + Symlink to each of the cache devices comprising this cache set. + +cache_available_percent + Percentage of cache device free. + +clear_stats + Clears the statistics associated with this cache + +dirty_data + Amount of dirty data is in the cache (updated when garbage collection runs). + +flash_vol_create + Echoing a size to this file (in human readable units, k/M/G) creates a thinly + provisioned volume backed by the cache set. + +io_error_halflife +io_error_limit + These determines how many errors we accept before disabling the cache. + Each error is decayed by the half life (in # ios). If the decaying count + reaches io_error_limit dirty data is written out and the cache is disabled. + +journal_delay_ms + Journal writes will delay for up to this many milliseconds, unless a cache + flush happens sooner. Defaults to 100. + +root_usage_percent + Percentage of the root btree node in use. If this gets too high the node + will split, increasing the tree depth. + +stop + Write to this file to shut down the cache set - waits until all attached + backing devices have been shut down. + +tree_depth + Depth of the btree (A single node btree has depth 0). + +unregister + Detaches all backing devices and closes the cache devices; if dirty data is + present it will disable writeback caching and wait for it to be flushed. + +SYSFS - CACHE SET INTERNAL: + +This directory also exposes timings for a number of internal operations, with +separate files for average duration, average frequency, last occurence and max +duration: garbage collection, btree read, btree node sorts and btree splits. + +active_journal_entries + Number of journal entries that are newer than the index. + +btree_nodes + Total nodes in the btree. + +btree_used_percent + Average fraction of btree in use. + +bset_tree_stats + Statistics about the auxiliary search trees + +btree_cache_max_chain + Longest chain in the btree node cache's hash table + +cache_read_races + Counts instances where while data was being read from the cache, the bucket + was reused and invalidated - i.e. where the pointer was stale after the read + completed. When this occurs the data is reread from the backing device. + +trigger_gc + Writing to this file forces garbage collection to run. + +SYSFS - CACHE DEVICE: + +block_size + Minimum granularity of writes - should match hardware sector size. + +btree_written + Sum of all btree writes, in (kilo/mega/giga) bytes + +bucket_size + Size of buckets + +cache_replacement_policy + One of either lru, fifo or random. + +discard + Boolean; if on a discard/TRIM will be issued to each bucket before it is + reused. Defaults to off, since SATA TRIM is an unqueued command (and thus + slow). + +freelist_percent + Size of the freelist as a percentage of nbuckets. Can be written to to + increase the number of buckets kept on the freelist, which lets you + artificially reduce the size of the cache at runtime. Mostly for testing + purposes (i.e. testing how different size caches affect your hit rate), but + since buckets are discarded when they move on to the freelist will also make + the SSD's garbage collection easier by effectively giving it more reserved + space. + +io_errors + Number of errors that have occured, decayed by io_error_halflife. + +metadata_written + Sum of all non data writes (btree writes and all other metadata). + +nbuckets + Total buckets in this cache + +priority_stats + Statistics about how recently data in the cache has been accessed. This can + reveal your working set size. + +written + Sum of all data that has been written to the cache; comparison with + btree_written gives the amount of write inflation in bcache. diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index a5eb7d19a65..9887f0414c1 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -5,7 +5,7 @@ The main aim of CFQ scheduler is to provide a fair allocation of the disk I/O bandwidth for all the processes which requests an I/O operation. CFQ maintains the per process queue for the processes which request I/O -operation(syncronous requests). In case of asynchronous requests, all the +operation(synchronous requests). In case of asynchronous requests, all the requests from all the processes are batched together according to their process's I/O priority. @@ -66,6 +66,47 @@ This parameter is used to set the timeout of synchronous requests. Default value of this is 124ms. In case to favor synchronous requests over asynchronous one, this value should be decreased relative to fifo_expire_async. +group_idle +----------- +This parameter forces idling at the CFQ group level instead of CFQ +queue level. This was introduced after after a bottleneck was observed +in higher end storage due to idle on sequential queue and allow dispatch +from a single queue. The idea with this parameter is that it can be run with +slice_idle=0 and group_idle=8, so that idling does not happen on individual +queues in the group but happens overall on the group and thus still keeps the +IO controller working. +Not idling on individual queues in the group will dispatch requests from +multiple queues in the group at the same time and achieve higher throughput +on higher end storage. + +Default value for this parameter is 8ms. + +latency +------- +This parameter is used to enable/disable the latency mode of the CFQ +scheduler. If latency mode (called low_latency) is enabled, CFQ tries +to recompute the slice time for each process based on the target_latency set +for the system. This favors fairness over throughput. Disabling low +latency (setting it to 0) ignores target latency, allowing each process in the +system to get a full time slice. + +By default low latency mode is enabled. + +target_latency +-------------- +This parameter is used to calculate the time slice for a process if cfq's +latency mode is enabled. It will ensure that sync requests have an estimated +latency. But if sequential workload is higher(e.g. sequential read), +then to meet the latency constraints, throughput may decrease because of less +time for each process to issue I/O request before the cfq queue is switched. + +Though this can be overcome by disabling the latency_mode, it may increase +the read latency for some applications. This parameter allows for changing +target_latency through the sysfs interface which can provide the balanced +throughput and read latency. + +Default value for target_latency is 300ms. + slice_async ----------- This parameter is same as of slice_sync but for asynchronous queue. The @@ -98,8 +139,8 @@ in the device exceeds this parameter. This parameter is used for synchronous request. In case of storage with several disk, this setting can limit the parallel -processing of request. Therefore, increasing the value can imporve the -performace although this can cause the latency of some I/O to increase due +processing of request. Therefore, increasing the value can improve the +performance although this can cause the latency of some I/O to increase due to more number of requests. CFQ Group scheduling diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index 3c046ee6e8b..c80e8a3402f 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -1,14 +1,39 @@ * Atmel Direct Memory Access Controller (DMA) Required properties: -- compatible: Should be "atmel,<chip>-dma" -- reg: Should contain DMA registers location and length -- interrupts: Should contain DMA interrupt +- compatible: Should be "atmel,<chip>-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain DMA interrupt. +- #dma-cells: Must be <2>, used to represent the number of integer cells in +the dmas property of client devices. -Examples: +Example: -dma@ffffec00 { +dma0: dma@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21>; + #dma-cells = <2>; +}; + +DMA clients connected to the Atmel DMA controller must use the format +described in the dma.txt file, using a three-cell specifier for each channel: +a phandle plus two interger cells. +The three cells in order are: + +1. A phandle pointing to the DMA controller. +2. The memory interface (16 most significant bits), the peripheral interface +(16 less significant bits). +3. The peripheral identifier for the hardware handshaking interface. The +identifier can be different for tx and rx. + +Example: + +i2c0@i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + dmas = <&dma0 1 7>, + <&dma0 1 8>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt new file mode 100644 index 00000000000..b35a8d04f8b --- /dev/null +++ b/Documentation/devicetree/bindings/mips/ralink.txt @@ -0,0 +1,17 @@ +Ralink MIPS SoC device tree bindings + +1. SoCs + +Each device tree must specify a compatible value for the Ralink SoC +it uses in the compatible property of the root node. The compatible +value must be one of the following values: + + ralink,rt2880-soc + ralink,rt3050-soc + ralink,rt3052-soc + ralink,rt3350-soc + ralink,rt3352-soc + ralink,rt3883-soc + ralink,rt5350-soc + ralink,mt7620a-soc + ralink,mt7620n-soc diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index e7f8d7ed47e..6a983c1d87c 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -56,20 +56,20 @@ Example for an AM33xx board: nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; - gpmc,sync-clk = <0>; - gpmc,cs-on = <0>; - gpmc,cs-rd-off = <44>; - gpmc,cs-wr-off = <44>; - gpmc,adv-on = <6>; - gpmc,adv-rd-off = <34>; - gpmc,adv-wr-off = <44>; - gpmc,we-off = <40>; - gpmc,oe-off = <54>; - gpmc,access = <64>; - gpmc,rd-cycle = <82>; - gpmc,wr-cycle = <82>; - gpmc,wr-access = <40>; - gpmc,wr-data-mux-bus = <0>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index 6e1f61f1e78..9315ac96b49 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -5,8 +5,12 @@ on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -#address-cells & #size-cells must both be present in the mtd device and be -equal to 1. +#address-cells & #size-cells must both be present in the mtd device. There are +two valid values for both: +<1>: for partitions that require a single 32-bit cell to represent their + size/address (aka the value is below 4 GiB) +<2>: for partitions that require two 32-bit cells to represent their + size/address (aka the value is 4 GiB or greater). Required properties: - reg : The partition's offset and size within the mtd bank. @@ -36,3 +40,31 @@ flash@0 { reg = <0x0100000 0x200000>; }; }; + +flash@1 { + #address-cells = <1>; + #size-cells = <2>; + + /* a 4 GiB partition */ + partition@0 { + label = "filesystem"; + reg = <0x00000000 0x1 0x00000000>; + }; +}; + +flash@2 { + #address-cells = <2>; + #size-cells = <2>; + + /* an 8 GiB partition */ + partition@0 { + label = "filesystem #1"; + reg = <0x0 0x00000000 0x2 0x00000000>; + }; + + /* a 4 GiB partition */ + partition@200000000 { + label = "filesystem #2"; + reg = <0x2 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index 24cb4e46f67..ace4a64b369 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -26,16 +26,16 @@ Required properties: - bank-width: Address width of the device in bytes. GPMC supports 8-bit and 16-bit devices and so must be either 1 or 2 bytes. - compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on: Chip-select assertion time -- gpmc,cs-rd-off: Chip-select de-assertion time for reads -- gpmc,cs-wr-off: Chip-select de-assertion time for writes -- gpmc,oe-on: Output-enable assertion time -- gpmc,oe-off Output-enable de-assertion time -- gpmc,we-on: Write-enable assertion time -- gpmc,we-off: Write-enable de-assertion time -- gpmc,access: Start cycle to first data capture (read access) -- gpmc,rd-cycle: Total read cycle time -- gpmc,wr-cycle: Total write cycle time +- gpmc,cs-on-ns: Chip-select assertion time +- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads +- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes +- gpmc,oe-on-ns: Output-enable assertion time +- gpmc,oe-off-ns: Output-enable de-assertion time +- gpmc,we-on-ns: Write-enable assertion time +- gpmc,we-off-ns: Write-enable de-assertion time +- gpmc,access-ns: Start cycle to first data capture (read access) +- gpmc,rd-cycle-ns: Total read cycle time +- gpmc,wr-cycle-ns: Total write cycle time - reg: Chip-select, base address (relative to chip-select) and size of the memory mapped for the device. Note that base address will be typically 0 as this @@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 { bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on = <0>; - gpmc,cs-rd-off = <186>; - gpmc,cs-wr-off = <186>; - gpmc,adv-on = <12>; - gpmc,adv-rd-off = <48>; - gpmc,adv-wr-off = <48>; - gpmc,oe-on = <54>; - gpmc,oe-off = <168>; - gpmc,we-on = <54>; - gpmc,we-off = <168>; - gpmc,rd-cycle = <186>; - gpmc,wr-cycle = <186>; - gpmc,access = <114>; - gpmc,page-burst-access = <6>; - gpmc,bus-turnaround = <12>; - gpmc,cycle2cycle-delay = <18>; - gpmc,wr-data-mux-bus = <90>; - gpmc,wr-access = <186>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt new file mode 100644 index 00000000000..fff93d5f92d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -0,0 +1,22 @@ +* Marvell Armada 370/XP thermal management + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-thermal + marvell,armadaxp-thermal + +- reg: Device's register space. + Two entries are expected, see the examples below. + The first one is required for the sensor register; + the second one is required for the control register + to be used for sensor initialization (a.k.a. calibration). + +Example: + + thermal@d0018300 { + compatible = "marvell,armada370-thermal"; + reg = <0xd0018300 0x4 + 0xd0018304 0x4>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 4d1919bf233..6931c4348d2 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -42,6 +42,7 @@ onnn ON Semiconductor Corp. picochip Picochip Ltd powervr PowerVR (deprecated, use img) qcom Qualcomm, Inc. +ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt new file mode 100644 index 00000000000..279ac0a8c5b --- /dev/null +++ b/Documentation/dmatest.txt @@ -0,0 +1,81 @@ + DMA Test Guide + ============== + + Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +This small document introduces how to test DMA drivers using dmatest module. + + Part 1 - How to build the test module + +The menuconfig contains an option that could be found by following path: + Device Drivers -> DMA Engine support -> DMA Test client + +In the configuration file the option called CONFIG_DMATEST. The dmatest could +be built as module or inside kernel. Let's consider those cases. + + Part 2 - When dmatest is built as a module... + +After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest +folder with nodes will be created. They are the same as module parameters with +addition of the 'run' node that controls run and stop phases of the test. + +Note that in this case test will not run on load automatically. + +Example of usage: + % echo dma0chan0 > /sys/kernel/debug/dmatest/channel + % echo 2000 > /sys/kernel/debug/dmatest/timeout + % echo 1 > /sys/kernel/debug/dmatest/iterations + % echo 1 > /sys/kernel/debug/dmatest/run + +Hint: available channel list could be extracted by running the following +command: + % ls -1 /sys/class/dma/ + +After a while you will start to get messages about current status or error like +in the original code. + +Note that running a new test will stop any in progress test. + +The following command should return actual state of the test. + % cat /sys/kernel/debug/dmatest/run + +To wait for test done the user may perform a busy loop that checks the state. + + % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] + > do + > echo -n "." + > sleep 1 + > done + > echo + + Part 3 - When built-in in the kernel... + +The module parameters that is supplied to the kernel command line will be used +for the first performed test. After user gets a control, the test could be +interrupted or re-run with same or different parameters. For the details see +the above section "Part 2 - When dmatest is built as a module..." + +In both cases the module parameters are used as initial values for the test case. +You always could check them at run-time by running + % grep -H . /sys/module/dmatest/parameters/* + + Part 4 - Gathering the test results + +The module provides a storage for the test results in the memory. The gathered +data could be used after test is done. + +The special file 'results' in the debugfs represents gathered data of the in +progress test. The messages collected are printed to the kernel log as well. + +Example of output: + % cat /sys/kernel/debug/dmatest/results + dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) + +The message format is unified across the different types of errors. A number in +the parens represents additional information, e.g. error code, error counter, +or status. + +Comparison between buffers is stored to the dedicated structure. + +Note that the verify result is now accessible only via file 'results' in the +debugfs. diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index 7671352216f..b349d57b76e 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -1,8 +1,8 @@ - BTRFS - ===== +BTRFS +===== -Btrfs is a new copy on write filesystem for Linux aimed at +Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. Initially developed by Oracle, Btrfs is licensed under the GPL and open for contribution from anyone. @@ -34,9 +34,175 @@ The main Btrfs features include: * Online filesystem defragmentation +Mount Options +============= - MAILING LIST - ============ +When mounting a btrfs filesystem, the following option are accepted. +Unless otherwise specified, all options default to off. + + alloc_start=<bytes> + Debugging option to force all block allocations above a certain + byte threshold on each block device. The value is specified in + bytes, optionally with a K, M, or G suffix, case insensitive. + Default is 1MB. + + autodefrag + Detect small random writes into files and queue them up for the + defrag process. Works best for small files; Not well suited for + large database workloads. + + check_int + check_int_data + check_int_print_mask=<value> + These debugging options control the behavior of the integrity checking + module (the BTRFS_FS_CHECK_INTEGRITY config option required). + + check_int enables the integrity checker module, which examines all + block write requests to ensure on-disk consistency, at a large + memory and CPU cost. + + check_int_data includes extent data in the integrity checks, and + implies the check_int option. + + check_int_print_mask takes a bitmask of BTRFSIC_PRINT_MASK_* values + as defined in fs/btrfs/check-integrity.c, to control the integrity + checker module behavior. + + See comments at the top of fs/btrfs/check-integrity.c for more info. + + compress + compress=<type> + compress-force + compress-force=<type> + Control BTRFS file data compression. Type may be specified as "zlib" + "lzo" or "no" (for no compression, used for remounting). If no type + is specified, zlib is used. If compress-force is specified, + all files will be compressed, whether or not they compress well. + If compression is enabled, nodatacow and nodatasum are disabled. + + degraded + Allow mounts to continue with missing devices. A read-write mount may + fail with too many devices missing, for example if a stripe member + is completely missing. + + device=<devicepath> + Specify a device during mount so that ioctls on the control device + can be avoided. Especialy useful when trying to mount a multi-device + setup as root. May be specified multiple times for multiple devices. + + discard + Issue frequent commands to let the block device reclaim space freed by + the filesystem. This is useful for SSD devices, thinly provisioned + LUNs and virtual machine images, but may have a significant + performance impact. (The fstrim command is also available to + initiate batch trims from userspace). + + enospc_debug + Debugging option to be more verbose in some ENOSPC conditions. + + fatal_errors=<action> + Action to take when encountering a fatal error: + "bug" - BUG() on a fatal error. This is the default. + "panic" - panic() on a fatal error. + + flushoncommit + The 'flushoncommit' mount option forces any data dirtied by a write in a + prior transaction to commit as part of the current commit. This makes + the committed state a fully consistent view of the file system from the + application's perspective (i.e., it includes all completed file system + operations). This was previously the behavior only when a snapshot is + created. + + inode_cache + Enable free inode number caching. Defaults to off due to an overflow + problem when the free space crcs don't fit inside a single page. + + max_inline=<bytes> + Specify the maximum amount of space, in bytes, that can be inlined in + a metadata B-tree leaf. The value is specified in bytes, optionally + with a K, M, or G suffix, case insensitive. In practice, this value + is limited by the root sector size, with some space unavailable due + to leaf headers. For a 4k sectorsize, max inline data is ~3900 bytes. + + metadata_ratio=<value> + Specify that 1 metadata chunk should be allocated after every <value> + data chunks. Off by default. + + noacl + Disable support for Posix Access Control Lists (ACLs). See the + acl(5) manual page for more information about ACLs. + + nobarrier + Disables the use of block layer write barriers. Write barriers ensure + that certain IOs make it through the device cache and are on persistent + storage. If used on a device with a volatile (non-battery-backed) + write-back cache, this option will lead to filesystem corruption on a + system crash or power loss. + + nodatacow + Disable data copy-on-write for newly created files. Implies nodatasum, + and disables all compression. + + nodatasum + Disable data checksumming for newly created files. + + notreelog + Disable the tree logging used for fsync and O_SYNC writes. + + recovery + Enable autorecovery attempts if a bad tree root is found at mount time. + Currently this scans a list of several previous tree roots and tries to + use the first readable. + + skip_balance + Skip automatic resume of interrupted balance operation after mount. + May be resumed with "btrfs balance resume." + + space_cache (*) + Enable the on-disk freespace cache. + nospace_cache + Disable freespace cache loading without clearing the cache. + clear_cache + Force clearing and rebuilding of the disk space cache if something + has gone wrong. + + ssd + nossd + ssd_spread + Options to control ssd allocation schemes. By default, BTRFS will + enable or disable ssd allocation heuristics depending on whether a + rotational or nonrotational disk is in use. The ssd and nossd options + can override this autodetection. + + The ssd_spread mount option attempts to allocate into big chunks + of unused space, and may perform better on low-end ssds. ssd_spread + implies ssd, enabling all other ssd heuristics as well. + + subvol=<path> + Mount subvolume at <path> rather than the root subvolume. <path> is + relative to the top level subvolume. + + subvolid=<ID> + Mount subvolume specified by an ID number rather than the root subvolume. + This allows mounting of subvolumes which are not in the root of the mounted + filesystem. + You can use "btrfs subvolume list" to see subvolume ID numbers. + + subvolrootid=<objectid> (deprecated) + Mount subvolume specified by <objectid> rather than the root subvolume. + This allows mounting of subvolumes which are not in the root of the mounted + filesystem. + You can use "btrfs subvolume show " to see the object ID for a subvolume. + + thread_pool=<number> + The number of worker threads to allocate. The default number is equal + to the number of CPUs + 2, or 8, whichever is smaller. + + user_subvol_rm_allowed + Allow subvolumes to be deleted by a non-root user. Use with caution. + +MAILING LIST +============ There is a Btrfs mailing list hosted on vger.kernel.org. You can find details on how to subscribe here: @@ -49,8 +215,8 @@ http://dir.gmane.org/gmane.comp.file-systems.btrfs - IRC - === +IRC +=== Discussion of Btrfs also occurs on the #btrfs channel of the Freenode IRC network. diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index dcf338e62b7..bd3c56c6738 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -146,7 +146,7 @@ USAGE Format options -------------- --l [label] : Give a volume label, up to 256 unicode name. +-l [label] : Give a volume label, up to 512 unicode name. -a [0 or 1] : Split start location of each area for heap-based allocation. 1 is set by default, which performs this. -o [int] : Set overprovision ratio in percent over volume size. @@ -156,6 +156,8 @@ Format options -z [int] : Set the number of sections per zone. 1 is set by default. -e [str] : Set basic extension list. e.g. "mp3,gif,mov" +-t [0 or 1] : Disable discard command or not. + 1 is set by default, which conducts discard. ================================================================================ DESIGN diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 77a1d11af72..6f83fa965b4 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -72,11 +72,11 @@ in this document, but drivers acting as clients to the GPIO interface must not care how it's implemented.) That said, if the convention is supported on their platform, drivers should -use it when possible. Platforms must declare GENERIC_GPIO support in their -Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't -work without standard GPIO calls should have Kconfig entries which depend -on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as -optimized-away stubs, when drivers use the include file: +use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or +ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without +standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The +GPIO calls are available, either as "real code" or as optimized-away stubs, +when drivers use the include file: #include <linux/gpio.h> diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation index b73bbfb697b..36a3e79c120 100644 --- a/Documentation/thermal/exynos_thermal_emulation +++ b/Documentation/thermal/exynos_thermal_emulation @@ -13,11 +13,11 @@ Thermal emulation mode supports software debug for TMU's operation. User can set manually with software code and TMU will read current temperature from user value not from sensor's value. -Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available. -When it's enabled, sysfs node will be created under -/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'. +Enabling CONFIG_THERMAL_EMULATION option will make this support available. +When it's enabled, sysfs node will be created as +/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp. -The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any +The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any temperature you want to update to sysfs node, it automatically enable emulation mode and current temperature will be changed into it. (Exynos also supports user changable delay time which would be used to delay of diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 6859661c9d3..a71bd5b90fe 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -31,15 +31,17 @@ temperature) and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *type, int trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops) + struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, + int passive_delay, int polling_delay)) This interface function adds a new thermal zone device (sensor) to /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the thermal cooling devices registered at the same time. - name: the thermal zone name. + type: the thermal zone type. trips: the total number of trip points this thermal zone supports. mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable. devdata: device private data @@ -57,6 +59,12 @@ temperature) and throttle appropriate devices. will be fired. .set_emul_temp: set the emulation temperature which helps in debugging different threshold temperature points. + tzp: thermal zone platform parameters. + passive_delay: number of milliseconds to wait between polls when + performing passive cooling. + polling_delay: number of milliseconds to wait between polls when checking + whether trip points have been crossed (0 for interrupt driven systems). + 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) @@ -265,6 +273,10 @@ emul_temp Unit: millidegree Celsius WO, Optional + WARNING: Be careful while enabling this option on production systems, + because userland can easily disable the thermal policy by simply + flooding this sysfs node with low temperature values. + ***************************** * Cooling device attributes * ***************************** @@ -363,7 +375,7 @@ This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -5.3:notify_thermal_framework: +5.3:thermal_notify_framework: This function handles the trip events from sensor drivers. It starts throttling the cooling devices according to the policy configured. For CRITICAL and HOT trip points, this notifies the respective drivers, @@ -375,11 +387,3 @@ platform data is provided, this uses the step_wise throttling policy. This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. - -5.5:thermal_register_governor: -This function lets the various thermal governors to register themselves -with the Thermal framework. At run time, depending on a zone's platform -data, a particular governor is used for throttling. - -5.6:thermal_unregister_governor: -This function unregisters a governor from the thermal framework. diff --git a/Documentation/xtensa/mmu.txt b/Documentation/xtensa/mmu.txt new file mode 100644 index 00000000000..2b1af7606d5 --- /dev/null +++ b/Documentation/xtensa/mmu.txt @@ -0,0 +1,46 @@ +MMUv3 initialization sequence. + +The code in the initialize_mmu macro sets up MMUv3 memory mapping +identically to MMUv2 fixed memory mapping. Depending on +CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is +located in one of the following address ranges: + + 0xF0000000..0xFFFFFFFF (will keep same address in MMU v2 layout; + typically ROM) + 0x00000000..0x07FFFFFF (system RAM; this code is actually linked + at 0xD0000000..0xD7FFFFFF [cached] + or 0xD8000000..0xDFFFFFFF [uncached]; + in any case, initially runs elsewhere + than linked, so have to be careful) + +The code has the following assumptions: + This code fragment is run only on an MMU v3. + TLBs are in their reset state. + ITLBCFG and DTLBCFG are zero (reset state). + RASID is 0x04030201 (reset state). + PS.RING is zero (reset state). + LITBASE is zero (reset state, PC-relative literals); required to be PIC. + +TLB setup proceeds along the following steps. + + Legend: + VA = virtual address (two upper nibbles of it); + PA = physical address (two upper nibbles of it); + pc = physical range that contains this code; + +After step 2, we jump to virtual address in 0x40000000..0x5fffffff +that corresponds to next instruction to execute in this code. +After step 4, we jump to intended (linked) address of this code. + + Step 0 Step1 Step 2 Step3 Step 4 Step5 + ============ ===== ============ ===== ============ ===== + VA PA PA VA PA PA VA PA PA + ------ -- -- ------ -- -- ------ -- -- + E0..FF -> E0 -> E0 E0..FF -> E0 F0..FF -> F0 -> F0 + C0..DF -> C0 -> C0 C0..DF -> C0 E0..EF -> F0 -> F0 + A0..BF -> A0 -> A0 A0..BF -> A0 D8..DF -> 00 -> 00 + 80..9F -> 80 -> 80 80..9F -> 80 D0..D7 -> 00 -> 00 + 60..7F -> 60 -> 60 60..7F -> 60 + 40..5F -> 40 40..5F -> pc -> pc 40..5F -> pc + 20..3F -> 20 -> 20 20..3F -> 20 + 00..1F -> 00 -> 00 00..1F -> 00 diff --git a/Documentation/zh_CN/gpio.txt b/Documentation/zh_CN/gpio.txt index 4fa7b4e6f85..d5b8f01833f 100644 --- a/Documentation/zh_CN/gpio.txt +++ b/Documentation/zh_CN/gpio.txt @@ -84,10 +84,10 @@ GPIO 公约 控制器的抽象函数来实现它。(有一些可选的代码能支持这种策略的实现,本文档 后面会介绍，但作为 GPIO 接口的客户端驱动程序必须与它的实现无关。) -也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。平台 -必须在 Kconfig 中声明对 GENERIC_GPIO的支持 (布尔型 true)，并提供 -一个 <asm/gpio.h> 文件。那些调用标准 GPIO 函数的驱动应该在 Kconfig -入口中声明依赖GENERIC_GPIO。当驱动包含文件: +也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。同时，平台 +必须在 Kconfig 中选择 ARCH_REQUIRE_GPIOLIB 或者 ARCH_WANT_OPTIONAL_GPIOLIB +选项。那些调用标准 GPIO 函数的驱动应该在 Kconfig 入口中声明依赖GENERIC_GPIO。 +当驱动包含文件: #include <linux/gpio.h> diff --git a/MAINTAINERS b/MAINTAINERS index e73c374483c..3d7782b9f90 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1620,6 +1620,13 @@ W: http://www.baycom.org/~tom/ham/ham.html S: Maintained F: drivers/net/hamradio/baycom* +BCACHE (BLOCK LAYER CACHE) +M: Kent Overstreet <koverstreet@google.com> +L: linux-bcache@vger.kernel.org +W: http://bcache.evilpiepirate.org +S: Maintained: +F: drivers/md/bcache/ + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt @@ -8022,11 +8029,14 @@ F: arch/xtensa/ THERMAL M: Zhang Rui <rui.zhang@intel.com> +M: Eduardo Valentin <eduardo.valentin@ti.com> L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git +Q: https://patchwork.kernel.org/project/linux-pm/list/ S: Supported F: drivers/thermal/ F: include/linux/thermal.h +F: include/linux/cpu_cooling.h THINGM BLINK(1) USB RGB LED DRIVER M: Vivien Didelot <vivien.didelot@savoirfairelinux.com> diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 8629127640c..837a1f2d8b9 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_GPIO - bool - config ZONE_DMA bool default y diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index e6f4eca09ee..5917099470e 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -16,8 +16,6 @@ config ARC select GENERIC_FIND_FIRST_BIT # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW - select GENERIC_KERNEL_EXECVE - select GENERIC_KERNEL_THREAD select GENERIC_PENDING_IRQ if SMP select GENERIC_SMP_IDLE_THREAD select HAVE_ARCH_KGDB @@ -61,9 +59,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_HWEIGHT def_bool y -config BINFMT_ELF - def_bool y - config STACKTRACE_SUPPORT def_bool y select STACKTRACE @@ -82,6 +77,7 @@ menu "ARC Architecture Configuration" menu "ARC Platform/SoC/Board" source "arch/arc/plat-arcfpga/Kconfig" +source "arch/arc/plat-tb10x/Kconfig" #New platform adds here endmenu @@ -134,9 +130,6 @@ if SMP config ARC_HAS_COH_CACHES def_bool n -config ARC_HAS_COH_LLSC - def_bool n - config ARC_HAS_COH_RTSC def_bool n @@ -189,6 +182,10 @@ config ARC_CACHE_PAGES Note that Global I/D ENABLE + Per Page DISABLE works but corollary Global DISABLE + Per Page ENABLE won't work +config ARC_CACHE_VIPT_ALIASING + bool "Support VIPT Aliasing D$" + default n + endif #ARC_CACHE config ARC_HAS_ICCM @@ -304,6 +301,9 @@ config ARC_FPU_SAVE_RESTORE based on actual usage of FPU by a task. Thus our implemn does this for all tasks in system. +config ARC_CANT_LLSC + def_bool n + menuconfig ARC_CPU_REL_4_10 bool "Enable support for Rel 4.10 features" default n @@ -314,9 +314,7 @@ menuconfig ARC_CPU_REL_4_10 config ARC_HAS_LLSC bool "Insn: LLOCK/SCOND (efficient atomic ops)" default y - depends on ARC_CPU_770 - # if SMP, enable LLSC ONLY if ARC implementation has coherent atomics - depends on !SMP || ARC_HAS_COH_LLSC + depends on ARC_CPU_770 && !ARC_CANT_LLSC config ARC_HAS_SWAPE bool "Insn: SWAPE (endian-swap)" @@ -415,13 +413,6 @@ config ARC_DBG_TLB_MISS_COUNT Counts number of I and D TLB Misses and exports them via Debugfs The counters can be cleared via Debugfs as well -config CMDLINE - string "Kernel command line to built-in" - default "print-fatal-signals=1" - help - The default command line which will be appended to the optional - u-boot provided command line (see below) - config CMDLINE_UBOOT bool "Support U-boot kernel command line passing" default n @@ -430,8 +421,8 @@ config CMDLINE_UBOOT command line from the U-boot environment to the Linux kernel then switch this option on. ARC U-boot will setup the cmdline in RAM/flash and set r2 to point - to it. kernel startup code will copy the string into cmdline buffer - and also append CONFIG_CMDLINE. + to it. kernel startup code will append this to DeviceTree + /bootargs provided cmdline args. config ARC_BUILTIN_DTB_NAME string "Built in DTB" @@ -441,6 +432,10 @@ config ARC_BUILTIN_DTB_NAME source "kernel/Kconfig.preempt" +menu "Executable file formats" +source "fs/Kconfig.binfmt" +endmenu + endmenu # "ARC Architecture Configuration" source "mm/Kconfig" diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 92379c7cbc1..183397fd289 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -8,6 +8,10 @@ UTS_MACHINE := arc +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := arc-elf32- +endif + KBUILD_DEFCONFIG := fpga_defconfig cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__ @@ -87,20 +91,23 @@ core-y += arch/arc/ core-y += arch/arc/boot/dts/ core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/ +core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/ drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/ libs-y += arch/arc/lib/ $(LIBGCC) +boot := arch/arc/boot + #default target for make without any arguements. -KBUILD_IMAGE := bootpImage +KBUILD_IMAGE := bootpImage all: $(KBUILD_IMAGE) -boot := arch/arc/boot - bootpImage: vmlinux -uImage: vmlinux +boot_targets += uImage uImage.bin uImage.gz + +$(boot_targets): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ %.dtb %.dtb.S %.dtb.o: scripts diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile index 7d514c24e09..e597cb34c16 100644 --- a/arch/arc/boot/Makefile +++ b/arch/arc/boot/Makefile @@ -3,7 +3,6 @@ targets := vmlinux.bin vmlinux.bin.gz uImage # uImage build relies on mkimage being availble on your host for ARC target # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage # and make sure it's reacable from your PATH -MKIMAGE := $(srctree)/scripts/mkuboot.sh OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S @@ -12,7 +11,12 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \ UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE) UIMAGE_ENTRYADDR = $(LINUX_START_TEXT) -UIMAGE_COMPRESSION = gzip + +suffix-y := bin +suffix-$(CONFIG_KERNEL_GZIP) := gz + +targets += uImage uImage.bin uImage.gz +extra-y += vmlinux.bin vmlinux.bin.gz $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) @@ -20,7 +24,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,uimage) +$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE + $(call if_changed,uimage,none) + +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,uimage,gzip) -PHONY += FORCE +$(obj)/uImage: $(obj)/uImage.$(suffix-y) + @ln -sf $(notdir $<) $@ + @echo ' Image $@ is ready' diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile index 5776835d583..faf240e29ec 100644 --- a/arch/arc/boot/dts/Makefile +++ b/arch/arc/boot/dts/Makefile @@ -8,6 +8,8 @@ endif obj-y += $(builtindtb-y).dtb.o targets += $(builtindtb-y).dtb +.SECONDARY: $(obj)/$(builtindtb-y).dtb.S + dtbs: $(addprefix $(obj)/, $(builtindtb-y).dtb) -clean-files := *.dtb +clean-files := *.dtb *.dtb.S diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi new file mode 100644 index 00000000000..941ad118a7e --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -0,0 +1,340 @@ +/* + * Abilis Systems TB100 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/include/ "abilis_tb10x.dtsi" + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + clock-frequency = <500000000>; /* 500 MHZ */ + + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@FF10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + pingrp = "mis0_pins"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + pingrp = "mis1_pins"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + pingrp = "gpioa_pins"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + pingrp = "mip1_pins"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + pingrp = "mis2_pins"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + pingrp = "mis3_pins"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + pingrp = "gpioc_pins"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + pingrp = "mip3_pins"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + pingrp = "mis4_pins"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + pingrp = "mis5_pins"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + pingrp = "gpioe_pins"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + pingrp = "mip5_pins"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + pingrp = "mis6_pins"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + pingrp = "mis7_pins"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + pingrp = "gpiog_pins"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + pingrp = "mip7_pins"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + pingrp = "gpioj_pins"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + pingrp = "gpiok_pins"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + pingrp = "ciplus_pins"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + pingrp = "mcard_pins"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + pingrp = "mop_pins"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + pingrp = "mos0_pins"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + pingrp = "mos1_pins"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + pingrp = "mos2_pins"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + pingrp = "mos3_pins"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + pingrp = "uart0_pins"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + pingrp = "uart1_pins"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + pingrp = "gpiol_pins"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + pingrp = "gpiom_pins"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + pingrp = "spi3_pins"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + pingrp = "spi1_pins"; + }; + pctl_gpio_n: pctl-gpio-n { + pingrp = "gpion_pins"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + pingrp = "gpiob_pins"; + }; + pctl_gpio_d: pctl-gpio-d { + pingrp = "gpiod_pins"; + }; + pctl_gpio_f: pctl-gpio-f { + pingrp = "gpiof_pins"; + }; + pctl_gpio_h: pctl-gpio-h { + pingrp = "gpioh_pins"; + }; + pctl_gpio_i: pctl-gpio-i { + pingrp = "gpioi_pins"; + }; + }; + + gpioa: gpio@FF140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF140000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <0>; + gpio-pins = <&pctl_gpio_a>; + }; + gpiob: gpio@FF141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF141000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <3>; + gpio-pins = <&pctl_gpio_b>; + }; + gpioc: gpio@FF142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF142000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <5>; + gpio-pins = <&pctl_gpio_c>; + }; + gpiod: gpio@FF143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF143000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <8>; + gpio-pins = <&pctl_gpio_d>; + }; + gpioe: gpio@FF144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF144000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <10>; + gpio-pins = <&pctl_gpio_e>; + }; + gpiof: gpio@FF145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF145000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <13>; + gpio-pins = <&pctl_gpio_f>; + }; + gpiog: gpio@FF146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF146000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <15>; + gpio-pins = <&pctl_gpio_g>; + }; + gpioh: gpio@FF147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF147000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <18>; + gpio-pins = <&pctl_gpio_h>; + }; + gpioi: gpio@FF148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF148000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <20>; + gpio-pins = <&pctl_gpio_i>; + }; + gpioj: gpio@FF149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF149000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <32>; + gpio-pins = <&pctl_gpio_j>; + }; + gpiok: gpio@FF14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14A000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <64>; + gpio-pins = <&pctl_gpio_k>; + }; + gpiol: gpio@FF14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14B000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <86>; + gpio-pins = <&pctl_gpio_l>; + }; + gpiom: gpio@FF14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14C000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <90>; + gpio-pins = <&pctl_gpio_m>; + }; + gpion: gpio@FF14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14D000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <94>; + gpio-pins = <&pctl_gpio_n>; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts new file mode 100644 index 00000000000..c0fd3623c39 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -0,0 +1,127 @@ +/* + * Abilis Systems TB100 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/include/ "abilis_tb100.dtsi" + +/ { + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@FF100000 { + pinctrl-names = "abilis,simple-default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@FE100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@FF120000 { + sda-hold-time = <432>; + }; + i2c1: i2c@FF121000 { + sda-hold-time = <432>; + }; + i2c2: i2c@FF122000 { + sda-hold-time = <432>; + }; + i2c3: i2c@FF123000 { + sda-hold-time = <432>; + }; + i2c4: i2c@FF124000 { + sda-hold-time = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi new file mode 100644 index 00000000000..fd25c212049 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -0,0 +1,349 @@ +/* + * Abilis Systems TB101 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/include/ "abilis_tb10x.dtsi" + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + clock-frequency = <500000000>; /* 500 MHZ */ + + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@FF10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + pingrp = "mis0_pins"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + pingrp = "mis1_pins"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + pingrp = "gpioa_pins"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + pingrp = "mip1_pins"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + pingrp = "mis2_pins"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + pingrp = "mis3_pins"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + pingrp = "gpioc_pins"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + pingrp = "mip3_pins"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + pingrp = "mis4_pins"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + pingrp = "mis5_pins"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + pingrp = "gpioe_pins"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + pingrp = "mip5_pins"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + pingrp = "mis6_pins"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + pingrp = "mis7_pins"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + pingrp = "gpiog_pins"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + pingrp = "mip7_pins"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + pingrp = "gpioj_pins"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + pingrp = "gpiok_pins"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + pingrp = "ciplus_pins"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + pingrp = "mcard_pins"; + }; + pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ + pingrp = "stc0_pins"; + }; + pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ + pingrp = "stc1_pins"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + pingrp = "mop_pins"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + pingrp = "mos0_pins"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + pingrp = "mos1_pins"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + pingrp = "mos2_pins"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + pingrp = "mos3_pins"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + pingrp = "uart0_pins"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + pingrp = "uart1_pins"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + pingrp = "gpiol_pins"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + pingrp = "gpiom_pins"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + pingrp = "spi3_pins"; + }; + pctl_jtag: pctl-jtag { + pingrp = "jtag_pins"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + pingrp = "spi1_pins"; + }; + pctl_gpio_n: pctl-gpio-n { + pingrp = "gpion_pins"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + pingrp = "gpiob_pins"; + }; + pctl_gpio_d: pctl-gpio-d { + pingrp = "gpiod_pins"; + }; + pctl_gpio_f: pctl-gpio-f { + pingrp = "gpiof_pins"; + }; + pctl_gpio_h: pctl-gpio-h { + pingrp = "gpioh_pins"; + }; + pctl_gpio_i: pctl-gpio-i { + pingrp = "gpioi_pins"; + }; + }; + + gpioa: gpio@FF140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF140000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <0>; + gpio-pins = <&pctl_gpio_a>; + }; + gpiob: gpio@FF141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF141000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <3>; + gpio-pins = <&pctl_gpio_b>; + }; + gpioc: gpio@FF142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF142000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <5>; + gpio-pins = <&pctl_gpio_c>; + }; + gpiod: gpio@FF143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF143000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <8>; + gpio-pins = <&pctl_gpio_d>; + }; + gpioe: gpio@FF144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF144000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <10>; + gpio-pins = <&pctl_gpio_e>; + }; + gpiof: gpio@FF145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF145000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <13>; + gpio-pins = <&pctl_gpio_f>; + }; + gpiog: gpio@FF146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF146000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <15>; + gpio-pins = <&pctl_gpio_g>; + }; + gpioh: gpio@FF147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF147000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <18>; + gpio-pins = <&pctl_gpio_h>; + }; + gpioi: gpio@FF148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF148000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <20>; + gpio-pins = <&pctl_gpio_i>; + }; + gpioj: gpio@FF149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF149000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <32>; + gpio-pins = <&pctl_gpio_j>; + }; + gpiok: gpio@FF14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14A000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <64>; + gpio-pins = <&pctl_gpio_k>; + }; + gpiol: gpio@FF14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14B000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <86>; + gpio-pins = <&pctl_gpio_l>; + }; + gpiom: gpio@FF14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14C000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <90>; + gpio-pins = <&pctl_gpio_m>; + }; + gpion: gpio@FF14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14D000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <94>; + gpio-pins = <&pctl_gpio_n>; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts new file mode 100644 index 00000000000..6f8c381f626 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -0,0 +1,127 @@ +/* + * Abilis Systems TB101 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/include/ "abilis_tb101.dtsi" + +/ { + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@FF100000 { + pinctrl-names = "abilis,simple-default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@FE100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@FF120000 { + sda-hold-time = <432>; + }; + i2c1: i2c@FF121000 { + sda-hold-time = <432>; + }; + i2c2: i2c@FF122000 { + sda-hold-time = <432>; + }; + i2c3: i2c@FF123000 { + sda-hold-time = <432>; + }; + i2c4: i2c@FF124000 { + sda-hold-time = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi new file mode 100644 index 00000000000..a6139fc5aaa --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -0,0 +1,247 @@ +/* + * Abilis Systems TB10X SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + compatible = "abilis,arc-tb10x"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + }; + }; + + soc100 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0xfe000000 0xfe000000 0x02000000 + 0x000F0000 0x000F0000 0x00010000>; + compatible = "abilis,tb10x", "simple-bus"; + + pll0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "pll0"; + }; + cpu_clk: clkdiv_cpu { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "cpu_clk"; + }; + ahb_clk: clkdiv_ahb { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "ahb_clk"; + }; + + iomux: iomux@FF10601c { + #address-cells = <1>; + #size-cells = <1>; + compatible = "abilis,tb10x-iomux"; + reg = <0xFF10601c 0x4>; + }; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + tb10x_ictl: pic@fe002000 { + compatible = "abilis,tb10x_ictl"; + reg = <0xFE002000 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 30 31>; + }; + + uart@FF100000 { + compatible = "snps,dw-apb-uart", + "abilis,simple-pinctrl"; + reg = <0xFF100000 0x100>; + clock-frequency = <166666666>; + interrupts = <25 1>; + reg-shift = <2>; + reg-io-width = <4>; + interrupt-parent = <&tb10x_ictl>; + }; + ethernet@FE100000 { + compatible = "snps,dwmac-3.70a","snps,dwmac"; + reg = <0xFE100000 0x1058>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <6 1>; + interrupt-names = "macirq"; + clocks = <&ahb_clk>; + clock-names = "stmmaceth"; + }; + dma@FE000000 { + compatible = "snps,dma-spear1340"; + reg = <0xFE000000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <14 1>; + dma-channels = <6>; + dma-requests = <0>; + dma-masters = <1>; + #dma-cells = <3>; + chan_allocation_order = <0>; + chan_priority = <1>; + block_size = <0x7ff>; + data_width = <2 0 0 0>; + clocks = <&ahb_clk>; + clock-names = "hclk"; + }; + + i2c0: i2c@FF120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF120000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c1: i2c@FF121000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF121000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c2: i2c@FF122000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF122000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c3: i2c@FF123000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF123000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c4: i2c@FF124000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF124000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + + spi0: spi@0xFE010000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "abilis,tb100-spi"; + num-cs = <1>; + reg = <0xFE010000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <26 1>; + clocks = <&ahb_clk>; + }; + spi1: spi@0xFE011000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "abilis,tb100-spi", + "abilis,simple-pinctrl"; + num-cs = <2>; + reg = <0xFE011000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <10 1>; + clocks = <&ahb_clk>; + }; + + tb10x_tsm: tb10x-tsm@ff316000 { + compatible = "abilis,tb100-tsm"; + reg = <0xff316000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <17 1>; + output-clkdiv = <4>; + global-packet-delay = <0x21>; + port-packet-delay = <0>; + }; + tb10x_stream_proc: tb10x-stream-proc { + compatible = "abilis,tb100-streamproc"; + reg = <0xfff00000 0x200>, + <0x000f0000 0x10000>, + <0xfff00200 0x105>, + <0xff10600c 0x1>, + <0xfe001018 0x1>; + reg-names = "mbox", + "sp_iccm", + "mbox_irq", + "cpuctrl", + "a6it_int_force"; + interrupt-parent = <&tb10x_ictl>; + interrupts = <20 1>, <19 1>; + interrupt-names = "cmd_irq", "event_irq"; + }; + tb10x_mdsc0: tb10x-mdscr@FF300000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF300000 0x7000>; + tb100-mdscr-manage-tsin; + }; + tb10x_mscr0: tb10x-mdscr@FF307000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF307000 0x7000>; + }; + tb10x_scr0: tb10x-mdscr@ff30e000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF30e000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_scr1: tb10x-mdscr@ff312000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF312000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_wfb: tb10x-wfb@ff319000 { + compatible = "abilis,tb100-wfb"; + reg = <0xff319000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <16 1>; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts new file mode 100644 index 00000000000..ea16d782af5 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + compatible = "snps,nsimosci"; + clock-frequency = <80000000>; /* 80 MHZ */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + chosen { + bootargs = "console=tty0 consoleblank=0"; + }; + + aliases { + serial0 = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@c0000000 { + compatible = "snps,dw-apb-uart"; + reg = <0xc0000000 0x2000>; + interrupts = <11>; + #clock-frequency = <80000000>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + status = "okay"; + }; + + pgu0: pgu@c9000000 { + compatible = "snps,arcpgufb"; + reg = <0xc9000000 0x400>; + }; + + ps2: ps2@c9001000 { + compatible = "snps,arc_ps2"; + reg = <0xc9000400 0x14>; + interrupts = <13>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@c0003000 { + compatible = "snps,oscilan"; + reg = <0xc0003000 0x44>; + interrupts = <7>, <8>; + interrupt-names = "rx", "tx"; + }; + }; +}; diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig index b8698067ebb..95350be6ef6 100644 --- a/arch/arc/configs/fpga_defconfig +++ b/arch/arc/configs/fpga_defconfig @@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set @@ -24,6 +24,7 @@ CONFIG_ARC_PLAT_FPGA_LEGACY=y CONFIG_ARC_BOARD_ML509=y # CONFIG_ARC_HAS_RTSC is not set CONFIG_ARC_BUILTIN_DTB_NAME="angel4" +CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NET=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig new file mode 100644 index 00000000000..446c96c24ef --- /dev/null +++ b/arch/arc/configs/nsimosci_defconfig @@ -0,0 +1,75 @@ +CONFIG_CROSS_COMPILE="arc-elf32-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="ARCLinux" +# CONFIG_SWAP is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARC_PLAT_FPGA_LEGACY=y +CONFIG_ARC_BOARD_ML509=y +# CONFIG_ARC_IDE is not set +# CONFIG_ARCTANGENT_EMAC is not set +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci" +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +CONFIG_MOUSE_PS2_TOUCHKIT=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_ARC=y +CONFIG_SERIAL_ARC_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_XZ_DEC=y diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig new file mode 100644 index 00000000000..4fa5cd9f220 --- /dev/null +++ b/arch/arc/configs/tb10x_defconfig @@ -0,0 +1,117 @@ +CONFIG_CROSS_COMPILE="arc-elf32-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="tb10x" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio" +CONFIG_INITRAMFS_ROOT_UID=2100 +CONFIG_INITRAMFS_ROOT_GID=501 +# CONFIG_RD_GZIP is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_AIO is not set +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLOCK is not set +CONFIG_ARC_PLAT_TB10X=y +CONFIG_ARC_CACHE_LINE_SHIFT=5 +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_STACK_NONEXEC=y +CONFIG_HZ=250 +CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk" +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_DA=y +CONFIG_STMMAC_CHAINED=y +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_NET_DMA=y +CONFIG_ASYNC_TX_DMA=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index 48af742f8b5..d8dd660898b 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -32,7 +32,6 @@ generic-y += resource.h generic-y += scatterlist.h generic-y += sembuf.h generic-y += shmbuf.h -generic-y += shmparam.h generic-y += siginfo.h generic-y += socket.h generic-y += sockios.h diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 6632273861f..d5555fe4742 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -55,9 +55,6 @@ : "r"(data), "r"(ptr)); \ }) -/* used to give SHMLBA a value to avoid Cache Aliasing */ -extern unsigned int ARC_shmlba; - #define ARCH_DMA_MINALIGN L1_CACHE_BYTES /* diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 97ee96f2650..9f841af4109 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -19,13 +19,24 @@ #define _ASM_CACHEFLUSH_H #include <linux/mm.h> +#include <asm/shmparam.h> + +/* + * Semantically we need this because icache doesn't snoop dcache/dma. + * However ARC Cache flush requires paddr as well as vaddr, latter not available + * in the flush_icache_page() API. So we no-op it but do the equivalent work + * in update_mmu_cache() + */ +#define flush_icache_page(vma, page) void flush_cache_all(void); void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); -void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr, - int len); +void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len); +void __inv_icache_page(unsigned long paddr, unsigned long vaddr); +void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr); +#define __flush_dcache_page(p, v) \ + ___flush_dcache_page((unsigned long)p, (unsigned long)v) #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 @@ -42,23 +53,60 @@ void dma_cache_wback(unsigned long start, unsigned long sz); #define flush_cache_vmap(start, end) flush_cache_all() #define flush_cache_vunmap(start, end) flush_cache_all() -/* - * VM callbacks when entire/range of user-space V-P mappings are - * torn-down/get-invalidated - * - * Currently we don't support D$ aliasing configs for our VIPT caches - * NOPS for VIPT Cache with non-aliasing D$ configurations only - */ -#define flush_cache_dup_mm(mm) /* called on fork */ +#define flush_cache_dup_mm(mm) /* called on fork (VIVT only) */ + +#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING + #define flush_cache_mm(mm) /* called on munmap/exit */ #define flush_cache_range(mm, u_vstart, u_vend) #define flush_cache_page(vma, u_vaddr, pfn) /* PF handling/COW-break */ +#else /* VIPT aliasing dcache */ + +/* To clear out stale userspace mappings */ +void flush_cache_mm(struct mm_struct *mm); +void flush_cache_range(struct vm_area_struct *vma, + unsigned long start,unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, + unsigned long user_addr, unsigned long page); + +/* + * To make sure that userspace mapping is flushed to memory before + * get_user_pages() uses a kernel mapping to access the page + */ +#define ARCH_HAS_FLUSH_ANON_PAGE +void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long u_vaddr); + +#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ + +/* + * Simple wrapper over config option + * Bootup code ensures that hardware matches kernel configuration + */ +static inline int cache_is_vipt_aliasing(void) +{ +#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING + return 1; +#else + return 0; +#endif +} + +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3) + +/* + * checks if two addresses (after page aligning) index into same cache set + */ +#define addr_not_cache_congruent(addr1, addr2) \ + cache_is_vipt_aliasing() ? \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \ + #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ memcpy(dst, src, len); \ if (vma->vm_flags & VM_EXEC) \ - flush_icache_range_vaddr((unsigned long)(dst), vaddr, len);\ + __sync_icache_dcache((unsigned long)(dst), vaddr, len); \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index 4c588f9820c..57898a17eb8 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -9,7 +9,8 @@ #ifndef __ASM_ARC_IRQ_H #define __ASM_ARC_IRQ_H -#define NR_IRQS 32 +#define NR_CPU_IRQS 32 /* number of interrupt lines of ARC770 CPU */ +#define NR_IRQS 128 /* allow some CPU external IRQ handling */ /* Platform Independent IRQs */ #define TIMER0_IRQ 3 diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index bdf54610455..374a3551411 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -16,13 +16,27 @@ #define get_user_page(vaddr) __get_free_page(GFP_KERNEL) #define free_user_page(page, addr) free_page(addr) -/* TBD: for now don't worry about VIPT D$ aliasing */ #define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) #define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) +#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING + #define clear_user_page(addr, vaddr, pg) clear_page(addr) #define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom) +#else /* VIPT aliasing dcache */ + +struct vm_area_struct; +struct page; + +#define __HAVE_ARCH_COPY_USER_HIGHPAGE + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long u_vaddr, struct vm_area_struct *vma); +void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); + +#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ + #undef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index b7e36684c09..1cc4720facc 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -395,6 +395,9 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, #include <asm-generic/pgtable.h> +/* to cope with aliasing VIPT cache */ +#define HAVE_ARCH_UNMAPPED_AREA + /* * No page table caches to initialise */ diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h index 4dff5a1e412..602b0970a76 100644 --- a/arch/arc/include/asm/serial.h +++ b/arch/arc/include/asm/serial.h @@ -22,4 +22,14 @@ #define BASE_BAUD (arc_get_core_freq() / 16) +/* + * This is definitely going to break early 8250 consoles on multi-platform + * images but hey, it won't add any code complexity for a debug feature of + * one broken driver. + */ +#ifdef CONFIG_ARC_PLAT_TB10X +#undef BASE_BAUD +#define BASE_BAUD (arc_get_core_freq() / 16 / 3) +#endif + #endif /* _ASM_ARC_SERIAL_H */ diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h new file mode 100644 index 00000000000..fffeecc0427 --- /dev/null +++ b/arch/arc/include/asm/shmparam.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARC_ASM_SHMPARAM_H +#define __ARC_ASM_SHMPARAM_H + +/* Handle upto 2 cache bins */ +#define SHMLBA (2 * PAGE_SIZE) + +/* Enforce SHMLBA in shmat */ +#define __ARCH_FORCE_SHMLBA + +#endif diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 3eb2ce0bdfa..85b6df839bd 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -21,20 +21,35 @@ #ifndef __ASSEMBLY__ -#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm) +#define tlb_flush(tlb) \ +do { \ + if (tlb->fullmm) \ + flush_tlb_mm((tlb)->mm); \ +} while (0) /* * This pair is called at time of munmap/exit to flush cache and TLB entries * for mappings being torn down. - * 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now) - * as we don't support aliasing configs in our VIPT D$. - * 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well- - * albiet for difft reasons - its better handled by moving to new ASID + * 1) cache-flush part -implemented via tlb_start_vma( ) for VIPT aliasing D$ + * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range * * Note, read http://lkml.org/lkml/2004/1/15/6 */ +#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING #define tlb_start_vma(tlb, vma) -#define tlb_end_vma(tlb, vma) +#else +#define tlb_start_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ +} while(0) +#endif + +#define tlb_end_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) #define __tlb_remove_tlb_entry(tlb, ptep, address) diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c index 0dc148ebce7..7dcda702524 100644 --- a/arch/arc/kernel/asm-offsets.c +++ b/arch/arc/kernel/asm-offsets.c @@ -11,9 +11,9 @@ #include <linux/interrupt.h> #include <linux/thread_info.h> #include <linux/kbuild.h> +#include <linux/ptrace.h> #include <asm/hardirq.h> #include <asm/page.h> -#include <asm/ptrace.h> int main(void) { diff --git a/arch/arc/kernel/clk.c b/arch/arc/kernel/clk.c index 66ce0dc917f..10c7b0b5a07 100644 --- a/arch/arc/kernel/clk.c +++ b/arch/arc/kernel/clk.c @@ -8,7 +8,7 @@ #include <asm/clk.h> -unsigned long core_freq = 800000000; +unsigned long core_freq = 80000000; /* * As of now we default to device-tree provided clock diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c index d14764ae2c6..b8a549c4f54 100644 --- a/arch/arc/kernel/disasm.c +++ b/arch/arc/kernel/disasm.c @@ -12,8 +12,8 @@ #include <linux/types.h> #include <linux/kprobes.h> #include <linux/slab.h> +#include <linux/uaccess.h> #include <asm/disasm.h> -#include <asm/uaccess.h> #if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \ defined(CONFIG_KPROBES) diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 91eeab81f52..0c6d664d4a8 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -393,12 +393,14 @@ ARC_ENTRY EV_TLBProtV #ifdef CONFIG_ARC_MISALIGN_ACCESS SAVE_CALLEE_SAVED_USER mov r3, sp ; callee_regs -#endif bl do_misaligned_access -#ifdef CONFIG_ARC_MISALIGN_ACCESS - DISCARD_CALLEE_SAVED_USER + ; TBD: optimize - do this only if a callee reg was involved + ; either a dst of emulated LD/ST or src with address-writeback + RESTORE_CALLEE_SAVED_USER +#else + bl do_misaligned_error #endif b ret_from_exception diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 551c10dff48..8115fa53157 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -11,6 +11,8 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/irqdomain.h> +#include <linux/irqchip.h> +#include "../../drivers/irqchip/irqchip.h" #include <asm/sections.h> #include <asm/irq.h> #include <asm/mach_desc.h> @@ -26,7 +28,7 @@ * -Disable all IRQs (on CPU side) * -Optionally, setup the High priority Interrupts as Level 2 IRQs */ -void __init arc_init_IRQ(void) +void __cpuinit arc_init_IRQ(void) { int level_mask = 0; @@ -97,15 +99,13 @@ static const struct irq_domain_ops arc_intc_domain_ops = { static struct irq_domain *root_domain; -void __init init_onchip_IRQ(void) +static int __init +init_onchip_IRQ(struct device_node *intc, struct device_node *parent) { - struct device_node *intc = NULL; + if (parent) + panic("DeviceTree incore intc not a root irq controller\n"); - intc = of_find_compatible_node(NULL, NULL, "snps,arc700-intc"); - if(!intc) - panic("DeviceTree Missing incore intc\n"); - - root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0, + root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0, &arc_intc_domain_ops, NULL); if (!root_domain) @@ -113,8 +113,12 @@ void __init init_onchip_IRQ(void) /* with this we don't need to export root_domain */ irq_set_default_host(root_domain); + + return 0; } +IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); + /* * Late Interrupt system init called from start_kernel for Boot CPU only * @@ -123,12 +127,13 @@ void __init init_onchip_IRQ(void) */ void __init init_IRQ(void) { - init_onchip_IRQ(); - /* Any external intc can be setup here */ if (machine_desc->init_irq) machine_desc->init_irq(); + /* process the entire interrupt tree in one go */ + irqchip_init(); + #ifdef CONFIG_SMP /* Master CPU can initialize it's side of IPI */ if (machine_desc->init_smp) diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c index 3bfeacb674d..5a7b80e2d88 100644 --- a/arch/arc/kernel/kprobes.c +++ b/arch/arc/kernel/kprobes.c @@ -10,7 +10,6 @@ #include <linux/kprobes.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/kprobes.h> #include <linux/kdebug.h> #include <linux/sched.h> #include <linux/uaccess.h> diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c index cdd359352c0..376e0462296 100644 --- a/arch/arc/kernel/module.c +++ b/arch/arc/kernel/module.c @@ -47,7 +47,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, } } #endif - return 0; + return 0; } void module_arch_cleanup(struct module *mod) @@ -141,5 +141,5 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, mod->arch.unw_info = unw; } #endif - return 0; + return 0; } diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 2d95ac07df7..b2b3731dd1e 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -14,14 +14,13 @@ #include <linux/module.h> #include <linux/cpu.h> #include <linux/of_fdt.h> +#include <linux/cache.h> #include <asm/sections.h> #include <asm/arcregs.h> #include <asm/tlb.h> -#include <asm/cache.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/irq.h> -#include <asm/arcregs.h> #include <asm/prom.h> #include <asm/unwind.h> #include <asm/clk.h> @@ -32,14 +31,14 @@ int running_on_hw = 1; /* vs. on ISS */ char __initdata command_line[COMMAND_LINE_SIZE]; -struct machine_desc *machine_desc __initdata; +struct machine_desc *machine_desc __cpuinitdata; struct task_struct *_current_task[NR_CPUS]; /* For stack switching */ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; -void __init read_arc_build_cfg_regs(void) +void __cpuinit read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -238,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void __init arc_chk_ccms(void) +void __cpuinit arc_chk_ccms(void) { #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -273,7 +272,7 @@ void __init arc_chk_ccms(void) * hardware has dedicated regs which need to be saved/restored on ctx-sw * (Single Precision uses core regs), thus kernel is kind of oblivious to it */ -void __init arc_chk_fpu(void) +void __cpuinit arc_chk_fpu(void) { struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -294,7 +293,7 @@ void __init arc_chk_fpu(void) * such as only for boot CPU etc */ -void __init setup_processor(void) +void __cpuinit setup_processor(void) { char str[512]; int cpu_id = smp_processor_id(); @@ -319,23 +318,20 @@ void __init setup_processor(void) void __init setup_arch(char **cmdline_p) { + /* This also populates @boot_command_line from /bootargs */ + machine_desc = setup_machine_fdt(__dtb_start); + if (!machine_desc) + panic("Embedded DT invalid\n"); + + /* Append any u-boot provided cmdline */ #ifdef CONFIG_CMDLINE_UBOOT - /* Make sure that a whitespace is inserted before */ - strlcat(command_line, " ", sizeof(command_line)); + /* Add a whitespace seperator between the 2 cmdlines */ + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE); #endif - /* - * Append .config cmdline to base command line, which might already - * contain u-boot "bootargs" (handled by head.S, if so configured) - */ - strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line)); /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; - - machine_desc = setup_machine_fdt(__dtb_start); - if (!machine_desc) - panic("Embedded DT invalid\n"); + *cmdline_p = boot_command_line; /* To force early parsing of things like mem=xxx */ parse_early_param(); diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index f13f72807aa..09f4309aa2c 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -33,7 +33,6 @@ #include <linux/module.h> #include <linux/sched.h> #include <linux/kernel.h> -#include <linux/interrupt.h> #include <linux/time.h> #include <linux/init.h> #include <linux/timex.h> diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index 7496995371e..0471d9c9dd5 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -16,11 +16,12 @@ #include <linux/sched.h> #include <linux/kdebug.h> #include <linux/uaccess.h> -#include <asm/ptrace.h> +#include <linux/ptrace.h> +#include <linux/kprobes.h> +#include <linux/kgdb.h> #include <asm/setup.h> -#include <asm/kprobes.h> #include <asm/unaligned.h> -#include <asm/kgdb.h> +#include <asm/kprobes.h> void __init trap_init(void) { @@ -83,6 +84,7 @@ DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC) DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC) DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR) DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) +DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN) #ifdef CONFIG_ARC_MISALIGN_ACCESS /* @@ -91,21 +93,11 @@ DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) int do_misaligned_access(unsigned long cause, unsigned long address, struct pt_regs *regs, struct callee_regs *cregs) { - if (misaligned_fixup(address, regs, cause, cregs) != 0) { - siginfo_t info; - - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRALN; - info.si_addr = (void __user *)address; - return handle_exception(cause, "Misaligned Access", regs, - &info); - } + if (misaligned_fixup(address, regs, cause, cregs) != 0) + return do_misaligned_error(cause, address, regs); + return 0; } - -#else -DO_ERROR_INFO(SIGSEGV, "Misaligned Access", do_misaligned_access, SEGV_ACCERR) #endif /* diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index 0aec01985bf..11c301b81c9 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num) char buf[512]; int n = 0, len = sizeof(buf); - /* weird loop because pt_regs regs rev r12..r0, r25..r13 */ for (i = start_num; i < start_num + 13; i++) { n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t", i, (unsigned long)*reg_rev); @@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num) if (((i + 1) % 3) == 0) n += scnprintf(buf + n, len - n, "\n"); + /* because pt_regs has regs reversed: r12..r0, r25..r13 */ reg_rev--; } if (start_num != 0) n += scnprintf(buf + n, len - n, "\n\n"); - pr_info("%s", buf); + /* To continue printing callee regs on same line as scratch regs */ + if (start_num == 0) + pr_info("%s", buf); + else + pr_cont("%s\n", buf); } static void show_callee_regs(struct callee_regs *cregs) @@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf) dev_t dev = 0; char *nm = buf; + /* can't use print_vma_addr() yet as it doesn't check for + * non-inclusive vma + */ + vma = find_vma(current->active_mm, address); /* check against the find_vma( ) behaviour which returns the next VMA @@ -98,10 +106,13 @@ static void show_faulting_vma(unsigned long address, char *buf) ino = inode->i_ino; } pr_info(" @off 0x%lx in [%s]\n" - " VMA: 0x%08lx to 0x%08lx\n\n", - address - vma->vm_start, nm, vma->vm_start, vma->vm_end); - } else + " VMA: 0x%08lx to 0x%08lx\n", + vma->vm_start < TASK_UNMAPPED_BASE ? + address : address - vma->vm_start, + nm, vma->vm_start, vma->vm_end); + } else { pr_info(" @No matching VMA found\n"); + } } static void show_ecr_verbose(struct pt_regs *regs) @@ -110,7 +121,7 @@ static void show_ecr_verbose(struct pt_regs *regs) unsigned long address; cause_reg = current->thread.cause_code; - pr_info("\n[ECR]: 0x%08x => ", cause_reg); + pr_info("\n[ECR ]: 0x%08x => ", cause_reg); /* For Data fault, this is data address not instruction addr */ address = current->thread.fault_address; @@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs) /* For DTLB Miss or ProtV, display the memory involved too */ if (vec == ECR_V_DTLB_MISS) { - pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n", + pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n", (cause_code == 0x01) ? "Read From" : ((cause_code == 0x02) ? "Write to" : "EX"), address, regs->ret); @@ -168,20 +179,23 @@ void show_regs(struct pt_regs *regs) if (current->thread.cause_code) show_ecr_verbose(regs); - pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address); - pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret); + pr_info("[EFA ]: 0x%08lx\n[BLINK ]: %pS\n[ERET ]: %pS\n", + current->thread.fault_address, + (void *)regs->blink, (void *)regs->ret); - show_faulting_vma(regs->ret, buf); /* faulting code, not data */ + if (user_mode(regs)) + show_faulting_vma(regs->ret, buf); /* faulting code, not data */ - /* can't use print_vma_addr() yet as it doesn't check for - * non-inclusive vma - */ + pr_info("[STAT32]: 0x%08lx", regs->status32); + +#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit : "" + if (!user_mode(regs)) + pr_cont(" : %2s %2s %2s %2s %2s\n", + STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1), + STS_BIT(regs, E2), STS_BIT(regs, E1)); - /* print special regs */ - pr_info("status32: 0x%08lx\n", regs->status32); - pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp); - pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n", - regs->bta, regs->blink); + pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n", + regs->bta, regs->sp, regs->fp); pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n", regs->lp_start, regs->lp_end, regs->lp_count); diff --git a/arch/arc/mm/Makefile b/arch/arc/mm/Makefile index 168dc146a8f..ac95cc239c1 100644 --- a/arch/arc/mm/Makefile +++ b/arch/arc/mm/Makefile @@ -7,4 +7,4 @@ # obj-y := extable.o ioremap.o dma.o fault.o init.o -obj-y += tlb.o tlbex.o cache_arc700.o +obj-y += tlb.o tlbex.o cache_arc700.o mmap.o diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 88d617d8423..2f12bca8aef 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -68,20 +68,11 @@ #include <linux/mmu_context.h> #include <linux/syscalls.h> #include <linux/uaccess.h> +#include <linux/pagemap.h> #include <asm/cacheflush.h> #include <asm/cachectl.h> #include <asm/setup.h> - -#ifdef CONFIG_ARC_HAS_ICACHE -static void __ic_line_inv_no_alias(unsigned long, int); -static void __ic_line_inv_2_alias(unsigned long, int); -static void __ic_line_inv_4_alias(unsigned long, int); - -/* Holds the ptr to flush routine, dependign on size due to aliasing issues */ -static void (*___flush_icache_rtn) (unsigned long, int); -#endif - char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; @@ -109,7 +100,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) * the cpuinfo structure for later use. * No Validation done here, simply read/convert the BCRs */ -void __init read_decode_cache_bcr(void) +void __cpuinit read_decode_cache_bcr(void) { struct bcr_cache ibcr, dbcr; struct cpuinfo_arc_cache *p_ic, *p_dc; @@ -141,13 +132,14 @@ void __init read_decode_cache_bcr(void) * 3. Enable the Caches, setup default flush mode for D-Cache * 3. Calculate the SHMLBA used by user space */ -void __init arc_cache_init(void) +void __cpuinit arc_cache_init(void) { unsigned int temp; unsigned int cpu = smp_processor_id(); struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; int way_pg_ratio = way_pg_ratio; + int dcache_does_alias; char str[256]; printk(arc_cache_mumbojumbo(0, str, sizeof(str))); @@ -171,30 +163,6 @@ void __init arc_cache_init(void) } #endif - - /* - * if Cache way size is <= page size then no aliasing exhibited - * otherwise ratio determines num of aliases. - * e.g. 32K I$, 2 way set assoc, 8k pg size - * way-sz = 32k/2 = 16k - * way-pg-ratio = 16k/8k = 2, so 2 aliases possible - * (meaning 1 line could be in 2 possible locations). - */ - way_pg_ratio = ic->sz / ARC_ICACHE_WAYS / PAGE_SIZE; - switch (way_pg_ratio) { - case 0: - case 1: - ___flush_icache_rtn = __ic_line_inv_no_alias; - break; - case 2: - ___flush_icache_rtn = __ic_line_inv_2_alias; - break; - case 4: - ___flush_icache_rtn = __ic_line_inv_4_alias; - break; - default: - panic("Unsupported I-Cache Sz\n"); - } #endif /* Enable/disable I-Cache */ @@ -218,9 +186,13 @@ chk_dc: panic("Cache H/W doesn't match kernel Config"); } + dcache_does_alias = (dc->sz / ARC_DCACHE_WAYS) > PAGE_SIZE; + /* check for D-Cache aliasing */ - if ((dc->sz / ARC_DCACHE_WAYS) > PAGE_SIZE) - panic("D$ aliasing not handled right now\n"); + if (dcache_does_alias && !cache_is_vipt_aliasing()) + panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + else if (!dcache_does_alias && cache_is_vipt_aliasing()) + panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); #endif /* Set the default Invalidate Mode to "simpy discard dirty lines" @@ -303,47 +275,57 @@ static inline void __dc_entire_op(const int cacheop) * Per Line Operation on D-Cache * Doesn't deal with type-of-op/IRQ-disabling/waiting-for-flush-to-complete * It's sole purpose is to help gcc generate ZOL + * (aliasing VIPT dcache flushing needs both vaddr and paddr) */ -static inline void __dc_line_loop(unsigned long start, unsigned long sz, - int aux_reg) +static inline void __dc_line_loop(unsigned long paddr, unsigned long vaddr, + unsigned long sz, const int aux_reg) { - int num_lines, slack; + int num_lines; /* Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @start - aligned to cache line and integral @num_lines. + * and have @paddr - aligned to cache line and integral @num_lines. * This however can be avoided for page sized since: - * -@start will be cache-line aligned already (being page aligned) + * -@paddr will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - slack = start & ~DCACHE_LINE_MASK; - sz += slack; - start -= slack; + sz += paddr & ~DCACHE_LINE_MASK; + paddr &= DCACHE_LINE_MASK; + vaddr &= DCACHE_LINE_MASK; } num_lines = DIV_ROUND_UP(sz, ARC_DCACHE_LINE_LEN); +#if (CONFIG_ARC_MMU_VER <= 2) + paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; +#endif + while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER > 2) /* * Just as for I$, in MMU v3, D$ ops also require * "tag" bits in DC_PTAG, "index" bits in FLDL,IVDL ops - * But we pass phy addr for both. This works since Linux - * doesn't support aliasing configs for D$, yet. - * Thus paddr is enough to provide both tag and index. */ - write_aux_reg(ARC_REG_DC_PTAG, start); + write_aux_reg(ARC_REG_DC_PTAG, paddr); + + write_aux_reg(aux_reg, vaddr); + vaddr += ARC_DCACHE_LINE_LEN; +#else + /* paddr contains stuffed vaddrs bits */ + write_aux_reg(aux_reg, paddr); #endif - write_aux_reg(aux_reg, start); - start += ARC_DCACHE_LINE_LEN; + paddr += ARC_DCACHE_LINE_LEN; } } +/* For kernel mappings cache operation: index is same as paddr */ +#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) + /* * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback) */ -static inline void __dc_line_op(unsigned long start, unsigned long sz, - const int cacheop) +static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, + unsigned long sz, const int cacheop) { unsigned long flags, tmp = tmp; int aux; @@ -366,7 +348,7 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, else aux = ARC_REG_DC_FLDL; - __dc_line_loop(start, sz, aux); + __dc_line_loop(paddr, vaddr, sz, aux); if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ wait_for_flush(); @@ -381,7 +363,8 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, #else #define __dc_entire_op(cacheop) -#define __dc_line_op(start, sz, cacheop) +#define __dc_line_op(paddr, vaddr, sz, cacheop) +#define __dc_line_op_k(paddr, sz, cacheop) #endif /* CONFIG_ARC_HAS_DCACHE */ @@ -391,75 +374,38 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, /* * I-Cache Aliasing in ARC700 VIPT caches * - * For fetching code from I$, ARC700 uses vaddr (embedded in program code) - * to "index" into SET of cache-line and paddr from MMU to match the TAG - * in the WAYS of SET. - * - * However the CDU iterface (to flush/inv) lines from software, only takes - * paddr (to have simpler hardware interface). For simpler cases, using paddr - * alone suffices. - * e.g. 2-way-set-assoc, 16K I$ (8k MMU pg sz, 32b cache line size): - * way_sz = cache_sz / num_ways = 16k/2 = 8k - * num_sets = way_sz / line_sz = 8k/32 = 256 => 8 bits - * Ignoring the bottom 5 bits corresp to the off within a 32b cacheline, - * bits req for calc set-index = bits 12:5 (0 based). Since this range fits - * inside the bottom 13 bits of paddr, which are same for vaddr and paddr - * (with 8k pg sz), paddr alone can be safely used by CDU to unambigously - * locate a cache-line. + * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag. + * The orig Cache Management Module "CDU" only required paddr to invalidate a + * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry. + * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching + * the exact same line. * - * However for a difft sized cache, say 32k I$, above math yields need - * for 14 bits of vaddr to locate a cache line, which can't be provided by - * paddr, since the bit 13 (0 based) might differ between the two. - * - * This lack of extra bits needed for correct line addressing, defines the - * classical problem of Cache aliasing with VIPT architectures - * num_aliases = 1 << extra_bits - * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz => 2 aliases - * 2-way-set-assoc, 64K I$ with 8k MMU pg sz => 4 aliases - * 2-way-set-assoc, 16K I$ with 8k MMU pg sz => NO aliases + * However for larger Caches (way-size > page-size) - i.e. in Aliasing config, + * paddr alone could not be used to correctly index the cache. * * ------------------ * MMU v1/v2 (Fixed Page Size 8k) * ------------------ * The solution was to provide CDU with these additonal vaddr bits. These - * would be bits [x:13], x would depend on cache-geom. + * would be bits [x:13], x would depend on cache-geometry, 13 comes from + * standard page size of 8k. * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the * orig 5 bits of paddr were anyways ignored by CDU line ops, as they * represent the offset within cache-line. The adv of using this "clumsy" - * interface for additional info was no new reg was needed in CDU. + * interface for additional info was no new reg was needed in CDU programming + * model. * * 17:13 represented the max num of bits passable, actual bits needed were * fewer, based on the num-of-aliases possible. * -for 2 alias possibility, only bit 13 needed (32K cache) * -for 4 alias possibility, bits 14:13 needed (64K cache) * - * Since vaddr was not available for all instances of I$ flush req by core - * kernel, the only safe way (non-optimal though) was to kill all possible - * lines which could represent an alias (even if they didnt represent one - * in execution). - * e.g. for 64K I$, 4 aliases possible, so we did - * flush start - * flush start | 0x01 - * flush start | 0x2 - * flush start | 0x3 - * - * The penalty was invoking the operation itself, since tag match is anyways - * paddr based, a line which didn't represent an alias would not match the - * paddr, hence wont be killed - * - * Note that aliasing concerns are independent of line-sz for a given cache - * geometry (size + set_assoc) because the extra bits required by line-sz are - * reduced from the set calc. - * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz and using math above - * 32b line-sz: 9 bits set-index-calc, 5 bits offset-in-line => 1 extra bit - * 64b line-sz: 8 bits set-index-calc, 6 bits offset-in-line => 1 extra bit - * * ------------------ * MMU v3 * ------------------ - * This ver of MMU supports var page sizes (1k-16k) - Linux will support - * 8k (default), 16k and 4k. + * This ver of MMU supports variable page sizes (1k-16k): although Linux will + * only support 8k (default), 16k and 4k. * However from hardware perspective, smaller page sizes aggrevate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. @@ -468,144 +414,53 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, */ /*********************************************************** - * Machine specific helpers for per line I-Cache invalidate. - * 3 routines to accpunt for 1, 2, 4 aliases possible + * Machine specific helper for per line I-Cache invalidate. */ - -static void __ic_line_inv_no_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { -#if (CONFIG_ARC_MMU_VER > 2) - write_aux_reg(ARC_REG_IC_PTAG, start); -#endif - write_aux_reg(ARC_REG_IC_IVIL, start); - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv_2_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { - -#if (CONFIG_ARC_MMU_VER > 2) - /* - * MMU v3, CDU prog model (for line ops) now uses a new IC_PTAG - * reg to pass the "tag" bits and existing IVIL reg only looks - * at bits relevant for "index" (details above) - * Programming Notes: - * -when writing tag to PTAG reg, bit chopping can be avoided, - * CDU ignores non-tag bits. - * -Ideally "index" must be computed from vaddr, but it is not - * avail in these rtns. So to be safe, we kill the lines in all - * possible indexes corresp to num of aliases possible for - * given cache config. - */ - write_aux_reg(ARC_REG_IC_PTAG, start); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x1 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, start | (0x1 << PAGE_SHIFT)); -#else - write_aux_reg(ARC_REG_IC_IVIL, start); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x01); -#endif - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv_4_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { - -#if (CONFIG_ARC_MMU_VER > 2) - write_aux_reg(ARC_REG_IC_PTAG, start); - - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x3 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x2 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x1 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, start | (0x3 << PAGE_SHIFT)); -#else - write_aux_reg(ARC_REG_IC_IVIL, start); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x01); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x02); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x03); -#endif - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv(unsigned long start, unsigned long sz) +static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, + unsigned long sz) { unsigned long flags; - int num_lines, slack; + int num_lines; /* - * Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @start - aligned to cache line, and integral @num_lines + * Ensure we properly floor/ceil the non-line aligned/sized requests: * However page sized flushes can be compile time optimised. - * -@start will be cache-line aligned already (being page aligned) + * -@paddr will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - slack = start & ~ICACHE_LINE_MASK; - sz += slack; - start -= slack; + sz += paddr & ~ICACHE_LINE_MASK; + paddr &= ICACHE_LINE_MASK; + vaddr &= ICACHE_LINE_MASK; } num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - local_irq_save(flags); - (*___flush_icache_rtn) (start, num_lines); - local_irq_restore(flags); -} - -/* Unlike routines above, having vaddr for flush op (along with paddr), - * prevents the need to speculatively kill the lines in multiple sets - * based on ratio of way_sz : pg_sz - */ -static void __ic_line_inv_vaddr(unsigned long phy_start, - unsigned long vaddr, unsigned long sz) -{ - unsigned long flags; - int num_lines, slack; - unsigned int addr; - - slack = phy_start & ~ICACHE_LINE_MASK; - sz += slack; - phy_start -= slack; - num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - -#if (CONFIG_ARC_MMU_VER > 2) - vaddr &= ~ICACHE_LINE_MASK; - addr = phy_start; -#else +#if (CONFIG_ARC_MMU_VER <= 2) /* bits 17:13 of vaddr go as bits 4:0 of paddr */ - addr = phy_start | ((vaddr >> 13) & 0x1F); + paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; #endif local_irq_save(flags); while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER > 2) /* tag comes from phy addr */ - write_aux_reg(ARC_REG_IC_PTAG, addr); + write_aux_reg(ARC_REG_IC_PTAG, paddr); /* index bits come from vaddr */ write_aux_reg(ARC_REG_IC_IVIL, vaddr); vaddr += ARC_ICACHE_LINE_LEN; #else - /* this paddr contains vaddrs bits as needed */ - write_aux_reg(ARC_REG_IC_IVIL, addr); + /* paddr contains stuffed vaddrs bits */ + write_aux_reg(ARC_REG_IC_IVIL, paddr); #endif - addr += ARC_ICACHE_LINE_LEN; + paddr += ARC_ICACHE_LINE_LEN; } local_irq_restore(flags); } #else -#define __ic_line_inv(start, sz) #define __ic_line_inv_vaddr(pstart, vstart, sz) #endif /* CONFIG_ARC_HAS_ICACHE */ @@ -615,35 +470,72 @@ static void __ic_line_inv_vaddr(unsigned long phy_start, * Exported APIs */ -/* TBD: use pg_arch_1 to optimize this */ +/* + * Handle cache congruency of kernel and userspace mappings of page when kernel + * writes-to/reads-from + * + * The idea is to defer flushing of kernel mapping after a WRITE, possible if: + * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent + * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache) + * -In SMP, if hardware caches are coherent + * + * There's a corollary case, where kernel READs from a userspace mapped page. + * If the U-mapping is not congruent to to K-mapping, former needs flushing. + */ void flush_dcache_page(struct page *page) { - __dc_line_op((unsigned long)page_address(page), PAGE_SIZE, OP_FLUSH); + struct address_space *mapping; + + if (!cache_is_vipt_aliasing()) { + set_bit(PG_arch_1, &page->flags); + return; + } + + /* don't handle anon pages here */ + mapping = page_mapping(page); + if (!mapping) + return; + + /* + * pagecache page, file not yet mapped to userspace + * Make a note that K-mapping is dirty + */ + if (!mapping_mapped(mapping)) { + set_bit(PG_arch_1, &page->flags); + } else if (page_mapped(page)) { + + /* kernel reading from page with U-mapping */ + void *paddr = page_address(page); + unsigned long vaddr = page->index << PAGE_CACHE_SHIFT; + + if (addr_not_cache_congruent(paddr, vaddr)) + __flush_dcache_page(paddr, vaddr); + } } EXPORT_SYMBOL(flush_dcache_page); void dma_cache_wback_inv(unsigned long start, unsigned long sz) { - __dc_line_op(start, sz, OP_FLUSH_N_INV); + __dc_line_op_k(start, sz, OP_FLUSH_N_INV); } EXPORT_SYMBOL(dma_cache_wback_inv); void dma_cache_inv(unsigned long start, unsigned long sz) { - __dc_line_op(start, sz, OP_INV); + __dc_line_op_k(start, sz, OP_INV); } EXPORT_SYMBOL(dma_cache_inv); void dma_cache_wback(unsigned long start, unsigned long sz) { - __dc_line_op(start, sz, OP_FLUSH); + __dc_line_op_k(start, sz, OP_FLUSH); } EXPORT_SYMBOL(dma_cache_wback); /* - * This is API for making I/D Caches consistent when modifying code - * (loadable modules, kprobes, etc) + * This is API for making I/D Caches consistent when modifying + * kernel code (loadable modules, kprobes, kgdb...) * This is called on insmod, with kernel virtual address for CODE of * the module. ARC cache maintenance ops require PHY address thus we * need to convert vmalloc addr to PHY addr @@ -652,7 +544,6 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) { unsigned int tot_sz, off, sz; unsigned long phy, pfn; - unsigned long flags; /* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */ @@ -673,8 +564,13 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) /* Case: Kernel Phy addr (0x8000_0000 onwards) */ if (likely(kstart > PAGE_OFFSET)) { - __ic_line_inv(kstart, kend - kstart); - __dc_line_op(kstart, kend - kstart, OP_FLUSH); + /* + * The 2nd arg despite being paddr will be used to index icache + * This is OK since no alternate virtual mappings will exist + * given the callers for this case: kprobe/kgdb in built-in + * kernel code only. + */ + __sync_icache_dcache(kstart, kstart, kend - kstart); return; } @@ -692,42 +588,45 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) pfn = vmalloc_to_pfn((void *)kstart); phy = (pfn << PAGE_SHIFT) + off; sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off); - local_irq_save(flags); - __dc_line_op(phy, sz, OP_FLUSH); - __ic_line_inv(phy, sz); - local_irq_restore(flags); + __sync_icache_dcache(phy, kstart, sz); kstart += sz; tot_sz -= sz; } } /* - * Optimised ver of flush_icache_range() with spec callers: ptrace/signals - * where vaddr is also available. This allows passing both vaddr and paddr - * bits to CDU for cache flush, short-circuting the current pessimistic algo - * which kills all possible aliases. - * An added adv of knowing that vaddr is user-vaddr avoids various checks - * and handling for k-vaddr, k-paddr as done in orig ver above + * General purpose helper to make I and D cache lines consistent. + * @paddr is phy addr of region + * @vaddr is typically user or kernel vaddr (vmalloc) + * Howver in one instance, flush_icache_range() by kprobe (for a breakpt in + * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will + * use a paddr to index the cache (despite VIPT). This is fine since since a + * built-in kernel page will not have any virtual mappings (not even kernel) + * kprobe on loadable module is different as it will have kvaddr. */ -void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr, - int len) +void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) { - __ic_line_inv_vaddr(paddr, u_vaddr, len); - __dc_line_op(paddr, len, OP_FLUSH); + unsigned long flags; + + local_irq_save(flags); + __ic_line_inv_vaddr(paddr, vaddr, len); + __dc_line_op(paddr, vaddr, len, OP_FLUSH); + local_irq_restore(flags); +} + +/* wrapper to compile time eliminate alignment checks in flush loop */ +void __inv_icache_page(unsigned long paddr, unsigned long vaddr) +{ + __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE); } /* - * XXX: This also needs to be optim using pg_arch_1 - * This is called when a page-cache page is about to be mapped into a - * user process' address space. It offers an opportunity for a - * port to ensure d-cache/i-cache coherency if necessary. + * wrapper to clearout kernel or userspace mappings of a page + * For kernel mappings @vaddr == @paddr */ -void flush_icache_page(struct vm_area_struct *vma, struct page *page) +void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr) { - if (!(vma->vm_flags & VM_EXEC)) - return; - - __ic_line_inv((unsigned long)page_address(page), PAGE_SIZE); + __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV); } void flush_icache_all(void) @@ -756,6 +655,87 @@ noinline void flush_cache_all(void) } +#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING + +void flush_cache_mm(struct mm_struct *mm) +{ + flush_cache_all(); +} + +void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr, + unsigned long pfn) +{ + unsigned int paddr = pfn << PAGE_SHIFT; + + __sync_icache_dcache(paddr, u_vaddr, PAGE_SIZE); +} + +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + flush_cache_all(); +} + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long u_vaddr, struct vm_area_struct *vma) +{ + void *kfrom = page_address(from); + void *kto = page_address(to); + int clean_src_k_mappings = 0; + + /* + * If SRC page was already mapped in userspace AND it's U-mapping is + * not congruent with K-mapping, sync former to physical page so that + * K-mapping in memcpy below, sees the right data + * + * Note that while @u_vaddr refers to DST page's userspace vaddr, it is + * equally valid for SRC page as well + */ + if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) { + __flush_dcache_page(kfrom, u_vaddr); + clean_src_k_mappings = 1; + } + + copy_page(kto, kfrom); + + /* + * Mark DST page K-mapping as dirty for a later finalization by + * update_mmu_cache(). Although the finalization could have been done + * here as well (given that both vaddr/paddr are available). + * But update_mmu_cache() already has code to do that for other + * non copied user pages (e.g. read faults which wire in pagecache page + * directly). + */ + set_bit(PG_arch_1, &to->flags); + + /* + * if SRC was already usermapped and non-congruent to kernel mapping + * sync the kernel mapping back to physical page + */ + if (clean_src_k_mappings) { + __flush_dcache_page(kfrom, kfrom); + } else { + set_bit(PG_arch_1, &from->flags); + } +} + +void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) +{ + clear_page(to); + set_bit(PG_arch_1, &page->flags); +} + +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_page(page_address(page), u_vaddr); + __flush_dcache_page(page_address(page), page_address(page)); + +} + +#endif + /********************************************************************** * Explicit Cache flush request from user space via syscall * Needed for JITs which generate code on the fly diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c index 014172ba843..aa652e28132 100644 --- a/arch/arc/mm/extable.c +++ b/arch/arc/mm/extable.c @@ -27,7 +27,7 @@ int fixup_exception(struct pt_regs *regs) #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -long arc_copy_from_user_noinline(void *to, const void __user * from, +long arc_copy_from_user_noinline(void *to, const void __user *from, unsigned long n) { return __arc_copy_from_user(to, from, n); @@ -48,7 +48,7 @@ unsigned long arc_clear_user_noinline(void __user *to, } EXPORT_SYMBOL(arc_clear_user_noinline); -long arc_strncpy_from_user_noinline (char *dst, const char __user *src, +long arc_strncpy_from_user_noinline(char *dst, const char __user *src, long count) { return __arc_strncpy_from_user(dst, src, count); diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index af55aab803d..689ffd86d5e 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -12,7 +12,6 @@ #include <linux/sched.h> #include <linux/errno.h> #include <linux/ptrace.h> -#include <linux/version.h> #include <linux/uaccess.h> #include <linux/kdebug.h> #include <asm/pgalloc.h> diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 727d4794ea0..4a177365b2c 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -10,9 +10,6 @@ #include <linux/mm.h> #include <linux/bootmem.h> #include <linux/memblock.h> -#ifdef CONFIG_BLOCK_DEV_RAM -#include <linux/blk.h> -#endif #include <linux/swap.h> #include <linux/module.h> #include <asm/page.h> diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c index 3e5c92c7993..739e65f355d 100644 --- a/arch/arc/mm/ioremap.c +++ b/arch/arc/mm/ioremap.c @@ -12,7 +12,7 @@ #include <linux/io.h> #include <linux/mm.h> #include <linux/slab.h> -#include <asm/cache.h> +#include <linux/cache.h> void __iomem *ioremap(unsigned long paddr, unsigned long size) { diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c new file mode 100644 index 00000000000..2e06d56e987 --- /dev/null +++ b/arch/arc/mm/mmap.c @@ -0,0 +1,78 @@ +/* + * ARC700 mmap + * + * (started from arm version - for VIPT alias handling) + * + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/mman.h> +#include <linux/sched.h> +#include <asm/cacheflush.h> + +#define COLOUR_ALIGN(addr, pgoff) \ + ((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) + \ + (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1))) + +/* + * Ensure that shared mappings are correctly aligned to + * avoid aliasing issues with VIPT caches. + * We need to ensure that + * a specific page of an object is always mapped at a multiple of + * SHMLBA bytes. + */ +unsigned long +arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; + + /* + * We only need to do colour alignment if D cache aliases. + */ + if (aliasing) + do_align = filp || (flags & MAP_SHARED); + + /* + * We enforce the MAP_FIXED case. + */ + if (flags & MAP_FIXED) { + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + return -EINVAL; + return addr; + } + + if (len > TASK_SIZE) + return -ENOMEM; + + if (addr) { + if (do_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); +} diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 9b9ce23f4ec..066145b5f34 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -418,23 +418,52 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) local_irq_restore(flags); } -/* arch hook called by core VM at the end of handle_mm_fault( ), - * when a new PTE is entered in Page Tables or an existing one - * is modified. We aggresively pre-install a TLB entry +/* + * Called at the end of pagefault, for a userspace mapped page + * -pre-install the corresponding TLB entry into MMU + * -Finalize the delayed D-cache flush of kernel mapping of page due to + * flush_dcache_page(), copy_user_page() + * + * Note that flush (when done) involves both WBACK - so physical page is + * in sync as well as INV - so any non-congruent aliases don't remain */ - -void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress, +void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, pte_t *ptep) { + unsigned long vaddr = vaddr_unaligned & PAGE_MASK; + unsigned long paddr = pte_val(*ptep) & PAGE_MASK; + + create_tlb(vma, vaddr, ptep); + + /* + * Exec page : Independent of aliasing/page-color considerations, + * since icache doesn't snoop dcache on ARC, any dirty + * K-mapping of a code page needs to be wback+inv so that + * icache fetch by userspace sees code correctly. + * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it + * so userspace sees the right data. + * (Avoids the flush for Non-exec + congruent mapping case) + */ + if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) { + struct page *page = pfn_to_page(pte_pfn(*ptep)); + + int dirty = test_and_clear_bit(PG_arch_1, &page->flags); + if (dirty) { + /* wback + inv dcache lines */ + __flush_dcache_page(paddr, paddr); - create_tlb(vma, vaddress, ptep); + /* invalidate any existing icache lines */ + if (vma->vm_flags & VM_EXEC) + __inv_icache_page(paddr, vaddr); + } + } } /* Read the Cache Build Confuration Registers, Decode them and save into * the cpuinfo structure for later use. * No Validation is done here, simply read/convert the BCRs */ -void __init read_decode_mmu_bcr(void) +void __cpuinit read_decode_mmu_bcr(void) { unsigned int tmp; struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */ @@ -466,7 +495,7 @@ void __init read_decode_mmu_bcr(void) char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; - struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu; n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ", p_mmu->ver, TO_KB(p_mmu->pg_sz)); @@ -480,7 +509,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void __init arc_mmu_init(void) +void __cpuinit arc_mmu_init(void) { char str[256]; struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 4e20a1a5104..b3700c064c0 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -224,3 +224,15 @@ MACHINE_START(ML509, "ml509") .init_smp = iss_model_init_smp, #endif MACHINE_END + +static const char *nsimosci_compat[] __initdata = { + "snps,nsimosci", + NULL, +}; + +MACHINE_START(NSIMOSCI, "nsimosci") + .dt_compat = nsimosci_compat, + .init_early = NULL, + .init_machine = plat_fpga_populate_dev, + .init_irq = NULL, +MACHINE_END diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig new file mode 100644 index 00000000000..1d3452100f1 --- /dev/null +++ b/arch/arc/plat-tb10x/Kconfig @@ -0,0 +1,29 @@ +# Abilis Systems TB10x platform kernel configuration file +# +# Author: Christian Ruppert <christian.ruppert@abilis.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +menuconfig ARC_PLAT_TB10X + bool "Abilis TB10x" + select COMMON_CLK + select PINCTRL + select PINMUX + select ARCH_REQUIRE_GPIOLIB + help + Support for platforms based on the TB10x home media gateway SOC by + Abilis Systems. TB10x is based on the ARC700 CPU architecture. + Say Y if you are building a kernel for one of the SOCs in this + series (e.g. TB100 or TB101). If in doubt say N. diff --git a/arch/arc/plat-tb10x/Makefile b/arch/arc/plat-tb10x/Makefile new file mode 100644 index 00000000000..89611d25ef3 --- /dev/null +++ b/arch/arc/plat-tb10x/Makefile @@ -0,0 +1,21 @@ +# Abilis Systems TB10x platform Makefile +# +# Author: Christian Ruppert <christian.ruppert@abilis.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include + +obj-y += tb10x.o diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c new file mode 100644 index 00000000000..d3567691c7e --- /dev/null +++ b/arch/arc/plat-tb10x/tb10x.c @@ -0,0 +1,71 @@ +/* + * Abilis Systems TB10x platform initialisation + * + * Copyright (C) Abilis Systems 2012 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> +#include <linux/pinctrl/consumer.h> + +#include <asm/mach_desc.h> + + +static void __init tb10x_platform_init(void) +{ + of_clk_init(NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init tb10x_platform_late_init(void) +{ + struct device_node *dn; + + /* + * Pinctrl documentation recommends setting up the iomux here for + * all modules which don't require control over the pins themselves. + * Modules which need this kind of assistance are compatible with + * "abilis,simple-pinctrl", i.e. we can easily iterate over them. + * TODO: Does this recommended method work cleanly with pins required + * by modules? + */ + for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") { + struct platform_device *pd = of_find_device_by_node(dn); + struct pinctrl *pctl; + + pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default"); + if (IS_ERR(pctl)) { + int ret = PTR_ERR(pctl); + dev_err(&pd->dev, "Could not set up pinctrl: %d\n", + ret); + } + } +} + +static const char *tb10x_compat[] __initdata = { + "abilis,arc-tb10x", + NULL, +}; + +MACHINE_START(TB10x, "tb10x") + .dt_compat = tb10x_compat, + .init_machine = tb10x_platform_init, + .init_late = tb10x_platform_late_init, +MACHINE_END diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index aa71a232104..d423d58f938 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -109,9 +109,6 @@ config MIGHT_HAVE_PCI config SYS_SUPPORTS_APM_EMULATION bool -config GENERIC_GPIO - bool - config HAVE_TCM bool select GENERIC_ALLOCATOR @@ -900,7 +897,6 @@ config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 - select ARCH_VEXPRESS select CPU_V7 config ARCH_MULTI_V6_V7 diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index d1101103aa5..1460d9b88ad 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -403,5 +403,17 @@ 0x44d80000 0x2000>; /* M3 DMEM */ ti,hwmods = "wkup_m3"; }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + num-cs = <7>; + num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 0a61bbb9102..3f0239ec1bc 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -175,6 +175,14 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; }; i2c@12C80000 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 26d856ba50a..3e0c792e276 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -214,7 +214,7 @@ }; usb@12110000 { - samsung,vbus-gpio = <&gpx2 6 1 3 3>; + samsung,vbus-gpio = <&gpx2 6 0>; }; dp-controller { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index bf4744bab44..d449feb7e14 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -183,7 +183,7 @@ }; usb@12110000 { - samsung,vbus-gpio = <&gpx1 1 1 3 3>; + samsung,vbus-gpio = <&gpx1 1 0>; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 5a31964ae33..3046d1f81be 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -122,6 +122,7 @@ &usb_otg_hs { interface-type = <0>; + usb-phy = <&usb2_phy>; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 05f51e10ddd..96d1c206a57 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -68,6 +68,7 @@ &usb_otg_hs { interface-type = <0>; + usb-phy = <&usb2_phy>; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index d4a7280d18b..a626c50041f 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -73,6 +73,7 @@ &usb_otg_hs { interface-type = <0>; + usb-phy = <&usb2_phy>; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4ad03d9dbf0..82a404da1c0 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -519,7 +519,6 @@ interrupts = <0 92 0x4>, <0 93 0x4>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; - usb-phy = <&usb2_phy>; multipoint = <1>; num-eps = <16>; ram-bits = <12>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index b89233e43b0..f3447bc1b03 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -20,9 +20,9 @@ cpu@0 { operating-points = < /* kHz uV */ - 300000 975000 - 600000 1075000 - 800000 1200000 + 300000 1012500 + 600000 1200000 + 800000 1325000 >; clock-latency = <300000>; /* From legacy driver */ }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index c387bdc1b1d..a35d9cd5806 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -223,6 +223,15 @@ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */ + 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */ + 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */ + 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/ + >; + }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ @@ -358,12 +367,15 @@ }; &mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + eth@0 { compatible = "ks8851"; spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; - interrupts = <2>; /* gpio line 34 */ + interrupts = <2 8>; /* gpio line 34, low triggered */ vdd-supply = <&vdd_eth>; }; }; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 222a413c2c5..7e04103779c 100644 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -68,7 +68,7 @@ spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio6>; - interrupts = <11>; /* gpio line 171 */ + interrupts = <11 8>; /* gpio line 171, low triggered */ vdd-supply = <&vdd_eth>; }; }; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 7c2c23cc17e..2cf227c8609 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -15,9 +15,9 @@ cpu@0 { operating-points = < /* kHz uV */ - 350000 975000 - 700000 1075000 - 920000 1200000 + 350000 1025000 + 700000 1200000 + 920000 1313000 >; clock-latency = <300000>; /* From legacy driver */ }; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 33903ca0d87..c1ef64bc5ab 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -137,6 +137,8 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y @@ -153,6 +155,7 @@ CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -195,6 +198,7 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 70f1bdeb241..5af04f6daa3 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -180,6 +180,13 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; +#ifdef CONFIG_ARCH_MULTIPLATFORM + DT_MACHINE_START(GENERIC_DT, "Generic DT based system") + MACHINE_END + + mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT; +#endif + if (!dt_phys) return NULL; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 728007c4a2b..1522c7ae31b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -18,6 +18,7 @@ #include <linux/bootmem.h> #include <linux/seq_file.h> #include <linux/screen_info.h> +#include <linux/of_platform.h> #include <linux/init.h> #include <linux/kexec.h> #include <linux/of_fdt.h> @@ -659,9 +660,19 @@ struct screen_info screen_info = { static int __init customize_machine(void) { - /* customizes platform devices, or adds new ones */ + /* + * customizes platform devices, or adds new ones + * On DT based machines, we fall back to populating the + * machine from the device tree, if no callback is provided, + * otherwise we would always need an init_machine callback. + */ if (machine_desc->init_machine) machine_desc->init_machine(); +#ifdef CONFIG_OF + else + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +#endif return 0; } arch_initcall(customize_machine); diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 3f30aa1ae35..57344b7e98c 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -344,6 +344,7 @@ #define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208) #define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288) #define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408) +#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608) #define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48) #define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8) #define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48) diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index daebc1abc96..97d68852625 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -228,6 +228,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = { { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, { EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, + { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } }, { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, @@ -353,11 +354,9 @@ static void exynos5_init_pmu(void) /* * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable - * MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable */ tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION); - tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL | - EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN); + tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; __raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION); /* diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 78f795d73cb..ba44328464f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -5,6 +5,7 @@ config ARCH_MXC select AUTO_ZRELADDR if !ZBOOT_ROM select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER @@ -61,10 +62,6 @@ config MXC_ULPI config ARCH_HAS_RNGA bool -config IRAM_ALLOC - bool - select GENERIC_ALLOCATOR - config HAVE_IMX_ANATOP bool diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 930958973f8..70ae7c490ac 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o -obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 4cba7dbb079..c08ae3f99ce 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -12,6 +12,7 @@ #define __ASM_ARCH_MXC_COMMON_H__ struct platform_device; +struct pt_regs; struct clk; enum mxc_cpu_pwr_mode; diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index a58c8b0527c..67b9c48dcaf 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -24,7 +24,7 @@ ENTRY(v7_secondary_startup) ENDPROC(v7_secondary_startup) #endif -#ifdef CONFIG_PM +#ifdef CONFIG_ARM_CPU_SUSPEND /* * The following code must assume it is running from physical address * where absolute virtual addresses to the data section have to be diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 5e91112dcbe..3daf1ed9057 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -11,7 +11,9 @@ */ #include <linux/errno.h> +#include <linux/jiffies.h> #include <asm/cp15.h> +#include <asm/proc-fns.h> #include "common.h" diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c deleted file mode 100644 index e05cf407db6..00000000000 --- a/arch/arm/mach-imx/iram_alloc.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/genalloc.h> -#include "linux/platform_data/imx-iram.h" - -static unsigned long iram_phys_base; -static void __iomem *iram_virt_base; -static struct gen_pool *iram_pool; - -static inline void __iomem *iram_phys_to_virt(unsigned long p) -{ - return iram_virt_base + (p - iram_phys_base); -} - -void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) -{ - if (!iram_pool) - return NULL; - - *dma_addr = gen_pool_alloc(iram_pool, size); - pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr); - if (!*dma_addr) - return NULL; - return iram_phys_to_virt(*dma_addr); -} -EXPORT_SYMBOL(iram_alloc); - -void iram_free(unsigned long addr, unsigned int size) -{ - if (!iram_pool) - return; - - gen_pool_free(iram_pool, addr, size); -} -EXPORT_SYMBOL(iram_free); - -int __init iram_init(unsigned long base, unsigned long size) -{ - iram_phys_base = base; - - iram_pool = gen_pool_create(PAGE_SHIFT, -1); - if (!iram_pool) - return -ENOMEM; - - gen_pool_add(iram_pool, base, size, -1); - iram_virt_base = ioremap(iram_phys_base, size); - if (!iram_virt_base) - return -EIO; - - pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base); - return 0; -} diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 1a4e887f028..68ab858e27b 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void) if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_put; + goto exit_iounmap; } p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); @@ -309,7 +309,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_device_del; + goto exit_iounmap; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -402,8 +402,8 @@ exit_release_d: kfree(d); exit_release_p: kfree(p); -exit_device_del: - platform_device_del(pdev); +exit_iounmap: + iounmap(dma_base); exit_device_put: platform_device_put(pdev); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 857b1f097fd..f49cd51e162 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -37,8 +37,6 @@ config ARCH_OMAP2PLUS_TYPICAL select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 select PM_RUNTIME select REGULATOR - select SERIAL_OMAP - select SERIAL_OMAP_CONSOLE select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 select VFP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 62bb352c2d3..55a9d677768 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -32,12 +32,12 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 -obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o +smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o +smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o omap-4-5-common = omap4-common.o omap-wakeupgen.o \ sleep44xx.o -obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) -obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6de78605c0a..04c11655541 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -112,13 +112,13 @@ static u8 omap3_beagle_version; */ static struct { int mmc1_gpio_wp; - int usb_pwr_level; + bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */ int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, - .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .usb_pwr_level = 0, .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, @@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void) case 0: printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; - beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.usb_pwr_level = 1; beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 1a884670a6c..18ca61e300b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -73,11 +73,11 @@ #define LIS302_IRQ1_GPIO 181 #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ -/* list all spi devices here */ +/* List all SPI devices here. Note that the list/probe order seems to matter! */ enum { RX51_SPI_WL1251, - RX51_SPI_MIPID, /* LCD panel */ RX51_SPI_TSC2005, /* Touch Controller */ + RX51_SPI_MIPID, /* LCD panel */ }; static struct wl12xx_platform_data wl1251_pdata; diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index dab9fc014b9..49fd0d501c9 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/of.h> #include <linux/omap-dma.h> #include "soc.h" @@ -304,6 +305,9 @@ static int __init omap2_system_dma_init(void) if (res) return res; + if (of_have_populated_dt()) + return res; + pdev = platform_device_register_full(&omap_dma_dev_info); if (IS_ERR(pdev)) return PTR_ERR(pdev); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index ed946df5ad8..6c4da1254f5 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1520,36 +1520,22 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_node_by_name(child, "nand") { - ret = gpmc_probe_nand_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + for_each_child_of_node(pdev->dev.of_node, child) { - for_each_node_by_name(child, "onenand") { - ret = gpmc_probe_onenand_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + if (!child->name) + continue; - for_each_node_by_name(child, "nor") { - ret = gpmc_probe_generic_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + if (of_node_cmp(child->name, "nand") == 0) + ret = gpmc_probe_nand_child(pdev, child); + else if (of_node_cmp(child->name, "onenand") == 0) + ret = gpmc_probe_onenand_child(pdev, child); + else if (of_node_cmp(child->name, "ethernet") == 0 || + of_node_cmp(child->name, "nor") == 0) + ret = gpmc_probe_generic_child(pdev, child); - for_each_node_by_name(child, "ethernet") { - ret = gpmc_probe_generic_child(pdev, child); - if (ret < 0) { + if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", + __func__, child->full_name)) of_node_put(child); - return ret; - } } return 0; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0f4c18e6e60..1272c41d474 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -419,11 +419,15 @@ void __init omap3xxx_check_revision(void) cpu_rev = "1.0"; break; case 1: - /* FALLTHROUGH */ - default: omap_revision = AM335X_REV_ES2_0; cpu_rev = "2.0"; break; + case 2: + /* FALLTHROUGH */ + default: + omap_revision = AM335X_REV_ES2_1; + cpu_rev = "2.1"; + break; } break; case 0xb8f2: @@ -644,13 +648,12 @@ void __init omap_soc_device_init(void) soc_dev_attr->revision = soc_rev; soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - if (!IS_ERR_OR_NULL(parent)) - device_create_file(parent, &omap_soc_attr); + device_create_file(parent, &omap_soc_attr); } #endif /* CONFIG_SOC_BUS */ diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h index 6543ebf8ecf..3f26d297c08 100644 --- a/arch/arm/mach-omap2/mux34xx.h +++ b/arch/arm/mach-omap2/mux34xx.h @@ -393,6 +393,10 @@ #define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c #define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e #define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 +#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24 +#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26 +#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28 +#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a #define OMAP3_CONTROL_PADCONF_MUX_SIZE \ - (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) + (OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2) diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index eeea4fa28fb..e6d230700b2 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -876,4 +876,4 @@ static int __init omap_device_late_init(void) bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); return 0; } -omap_late_initcall(omap_device_late_init); +omap_late_initcall_sync(omap_device_late_init); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 18fdeeb3a44..197cc16870d 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -396,6 +396,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM335X_CLASS 0x33500033 #define AM335X_REV_ES1_0 AM335X_CLASS #define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8)) +#define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) @@ -496,6 +497,7 @@ level(__##fn); #define omap_subsys_initcall(fn) omap_initcall(subsys_initcall, fn) #define omap_device_initcall(fn) omap_initcall(device_initcall, fn) #define omap_late_initcall(fn) omap_initcall(late_initcall, fn) +#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn) #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 80ca974b2f8..6988b117fc1 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -38,7 +38,7 @@ config ARCH_MARCO select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_SMP - select SMP_ON_UP + select SMP_ON_UP if SMP help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 9075461999c..96100dbf5a2 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -162,7 +162,6 @@ config MACH_XCEP select MTD select MTD_CFI select MTD_CFI_INTELEXT - select MTD_CHAR select MTD_PHYSMAP select PXA25x select SMC91X diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 3621599c38a..7aa6e8cf830 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -35,6 +35,8 @@ void __init spear13xx_l2x0_init(void) * write alloc and 'Full line of zero' options * */ + if (!IS_ENABLED(CONFIG_CACHE_L2X0)) + return; writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 20c3b372cdf..84d72fc36df 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -63,6 +63,7 @@ config ARCH_TEGRA_114_SOC select ARM_ARCH_TIMER select ARM_GIC select ARM_L1_CACHE_SHIFT_6 + select CPU_FREQ_TABLE if CPU_FREQ select CPU_V7 select PINCTRL select PINCTRL_TEGRA114 diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index f66d7deae46..6a4387e39df 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -19,6 +19,8 @@ if ARCH_U8500 config UX500_SOC_COMMON bool default y + select ABX500_CORE + select AB8500_CORE select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a15dd6b63a8..3cd555ac6d0 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -403,8 +403,8 @@ static int mop500_prox_activate(struct device *dev) "no regulator\n"); return PTR_ERR(prox_regulator); } - regulator_enable(prox_regulator); - return 0; + + return regulator_enable(prox_regulator); } static void mop500_prox_deactivate(struct device *dev) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 995928ba22f..e90b5ab23b6 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -191,7 +191,7 @@ static const char *db8500_read_soc_id(void) /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+1), + readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); } diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 2eca54b6590..9433605cd29 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -3,6 +3,6 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o +orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index e39c2ba6e2f..249fe6333e1 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -150,7 +150,7 @@ err_out: } /* - * GENERIC_GPIO primitives. + * GPIO primitives. */ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 73b6e764034..48347dcf056 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -6,6 +6,7 @@ config ARM64 select ARCH_WANT_FRAME_POINTERS select ARM_AMBA select ARM_ARCH_TIMER + select ARM_GIC select CLONE_BACKWARDS select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -31,6 +32,8 @@ config ARM64 select OF select OF_EARLY_FLATTREE select PERF_USE_VMALLOC + select POWER_RESET + select POWER_SUPPLY select RTC_LIB select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE @@ -92,9 +95,6 @@ config SWIOTLB config IOMMU_HELPER def_bool SWIOTLB -config GENERIC_GPIO - bool - source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -105,6 +105,7 @@ config ARCH_VEXPRESS bool "ARMv8 software model (Versatile Express)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_VERSATILE + select POWER_RESET_VEXPRESS select VEXPRESS_CONFIG help This enables support for the ARMv8 software model (Versatile diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts index 198682b6de3..84fcc501828 100644 --- a/arch/arm64/boot/dts/foundation-v8.dts +++ b/arch/arm64/boot/dts/foundation-v8.dts @@ -23,7 +23,7 @@ }; cpus { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <0>; cpu@0 { diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h index 95e40725534..a6e1750369e 100644 --- a/arch/arm64/include/asm/system_misc.h +++ b/arch/arm64/include/asm/system_misc.h @@ -41,7 +41,7 @@ extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); void soft_restart(unsigned long); -extern void (*pm_restart)(const char *cmd); +extern void (*arm_pm_restart)(char str, const char *cmd); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index f4919721f7d..46f02c3b501 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -81,8 +81,8 @@ void soft_restart(unsigned long addr) void (*pm_power_off)(void); EXPORT_SYMBOL_GPL(pm_power_off); -void (*pm_restart)(const char *cmd); -EXPORT_SYMBOL_GPL(pm_restart); +void (*arm_pm_restart)(char str, const char *cmd); +EXPORT_SYMBOL_GPL(arm_pm_restart); void arch_cpu_idle_prepare(void) { @@ -131,8 +131,8 @@ void machine_restart(char *cmd) local_fiq_disable(); /* Now call the architecture specific reboot code. */ - if (pm_restart) - pm_restart(cmd); + if (arm_pm_restart) + arm_pm_restart('h', cmd); /* * Whoops - the architecture was unable to reboot. diff --git a/arch/arm64/lib/bitops.S b/arch/arm64/lib/bitops.S index 36216d30cb9..e5db797790d 100644 --- a/arch/arm64/lib/bitops.S +++ b/arch/arm64/lib/bitops.S @@ -21,13 +21,13 @@ /* * x0: bits 5:0 bit offset - * bits 63:6 word offset + * bits 31:6 word offset * x1: address */ .macro bitop, name, instr ENTRY( \name ) - and x3, x0, #63 // Get bit offset - eor x0, x0, x3 // Clear low bits + and w3, w0, #63 // Get bit offset + eor w0, w0, w3 // Clear low bits mov x2, #1 add x1, x1, x0, lsr #3 // Get word offset lsl x3, x2, x3 // Create mask @@ -41,8 +41,8 @@ ENDPROC(\name ) .macro testop, name, instr ENTRY( \name ) - and x3, x0, #63 // Get bit offset - eor x0, x0, x3 // Clear low bits + and w3, w0, #63 // Get bit offset + eor w0, w0, w3 // Clear low bits mov x2, #1 add x1, x1, x0, lsr #3 // Get word offset lsl x4, x2, x3 // Create mask diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 52638171d6f..98af6e760cc 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -148,6 +148,7 @@ void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs) #define VM_FAULT_BADACCESS 0x020000 #define ESR_WRITE (1 << 6) +#define ESR_CM (1 << 8) #define ESR_LNX_EXEC (1 << 24) /* @@ -206,7 +207,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; - int write = esr & ESR_WRITE; + bool write = (esr & ESR_WRITE) && !(esr & ESR_CM); unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | (write ? FAULT_FLAG_WRITE : 0); diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 22c40308360..bdc35589277 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -26,9 +26,6 @@ config AVR32 There is an AVR32 Linux project with a web page at http://avr32linux.org/. -config GENERIC_GPIO - def_bool y - config STACKTRACE_SUPPORT def_bool y diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 453ebe46b06..a117652b5fe 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -27,7 +27,7 @@ config BLACKFIN select HAVE_OPROFILE select HAVE_PERF_EVENTS select ARCH_HAVE_CUSTOM_GPIO_H - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select HAVE_UID16 select HAVE_UNDERSCORE_SYMBOL_PREFIX select VIRT_TO_BUS @@ -52,9 +52,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_GPIO - def_bool y - config FORCE_MAX_ZONEORDER int default "14" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 66cf00095b8..1fce08632ad 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -141,11 +141,11 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +BOOT_TARGETS = uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip PHONY += $(BOOT_TARGETS) install -KBUILD_IMAGE := $(boot)/vmImage +KBUILD_IMAGE := $(boot)/uImage -all: vmImage +all: uImage $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index f7d27d50d02..3efaa094fb9 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -6,7 +6,7 @@ # for more details. # -targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +targets := uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip ifeq ($(CONFIG_RAMKERNEL),y) @@ -39,22 +39,22 @@ quiet_cmd_mk_bin_xip = BIN $@ $(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE $(call if_changed,mk_bin_xip) -$(obj)/vmImage.bin: $(obj)/vmlinux.bin +$(obj)/uImage.bin: $(obj)/vmlinux.bin $(call if_changed,uimage,none) -$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2 +$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 $(call if_changed,uimage,bzip2) -$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(call if_changed,uimage,gzip) -$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma +$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) -$(obj)/vmImage.lzo: $(obj)/vmlinux.bin.lzo +$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo $(call if_changed,uimage,lzo) -$(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip +$(obj)/uImage.xip: $(obj)/vmlinux.bin.xip $(call if_changed,uimage,none) suffix-y := bin @@ -64,7 +64,7 @@ suffix-$(CONFIG_KERNEL_LZMA) := lzma suffix-$(CONFIG_KERNEL_LZO) := lzo suffix-$(CONFIG_ROMKERNEL) := xip -$(obj)/vmImage: $(obj)/vmImage.$(suffix-y) +$(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ install: diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index c8db653c72d..a107a98e997 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -11,7 +11,9 @@ #ifdef CONFIG_SMP +#include <asm/barrier.h> #include <linux/linkage.h> +#include <linux/types.h> asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); asmlinkage int __raw_atomic_update_asm(volatile int *ptr, int value); diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h index 6a4cfe2d336..a99957ea9e9 100644 --- a/arch/blackfin/include/asm/bfin_sdh.h +++ b/arch/blackfin/include/asm/bfin_sdh.h @@ -24,18 +24,27 @@ struct bfin_sd_host { #define CMD_INT_E (1 << 8) /* Command Interrupt */ #define CMD_PEND_E (1 << 9) /* Command Pending */ #define CMD_E (1 << 10) /* Command Enable */ +#ifdef RSI_BLKSZ +#define CMD_CRC_CHECK_D (1 << 11) /* CRC Check is disabled */ +#define CMD_DATA0_BUSY (1 << 12) /* Check for Busy State on the DATA0 pin */ +#endif /* SDH_PWR_CTL bitmasks */ +#ifndef RSI_BLKSZ #define PWR_ON 0x3 /* Power On */ #define SD_CMD_OD (1 << 6) /* Open Drain Output */ #define ROD_CTL (1 << 7) /* Rod Control */ +#endif /* SDH_CLK_CTL bitmasks */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E (1 << 8) /* MC_CLK Bus Clock Enable */ #define PWR_SV_E (1 << 9) /* Power Save Enable */ #define CLKDIV_BYPASS (1 << 10) /* Bypass Divisor */ -#define WIDE_BUS (1 << 11) /* Wide Bus Mode Enable */ +#define BUS_MODE_MASK 0x1800 /* Bus Mode Mask */ +#define STD_BUS_1 0x000 /* Standard Bus 1 bit mode */ +#define WIDE_BUS_4 0x800 /* Wide Bus 4 bit mode */ +#define BYTE_BUS_8 0x1000 /* Byte Bus 8 bit mode */ /* SDH_RESP_CMD bitmasks */ #define RESP_CMD 0x3f /* Response Command */ @@ -45,7 +54,13 @@ struct bfin_sd_host { #define DTX_DIR (1 << 1) /* Data Transfer Direction */ #define DTX_MODE (1 << 2) /* Data Transfer Mode */ #define DTX_DMA_E (1 << 3) /* Data Transfer DMA Enable */ +#ifndef RSI_BLKSZ #define DTX_BLK_LGTH (0xf << 4) /* Data Transfer Block Length */ +#else + +/* Bit masks for SDH_BLK_SIZE */ +#define DTX_BLK_LGTH 0x1fff /* Data Transfer Block Length */ +#endif /* SDH_STATUS bitmasks */ #define CMD_CRC_FAIL (1 << 0) /* CMD CRC Fail */ @@ -114,10 +129,14 @@ struct bfin_sd_host { /* SDH_E_STATUS bitmasks */ #define SDIO_INT_DET (1 << 1) /* SDIO Int Detected */ #define SD_CARD_DET (1 << 4) /* SD Card Detect */ +#define SD_CARD_BUSYMODE (1 << 31) /* Card is in Busy mode */ +#define SD_CARD_SLPMODE (1 << 30) /* Card in Sleep Mode */ +#define SD_CARD_READY (1 << 17) /* Card Ready */ /* SDH_E_MASK bitmasks */ #define SDIO_MSK (1 << 1) /* Mask SDIO Int Detected */ -#define SCD_MSK (1 << 6) /* Mask Card Detect */ +#define SCD_MSK (1 << 4) /* Mask Card Detect */ +#define CARD_READY_MSK (1 << 16) /* Mask Card Ready */ /* SDH_CFG bitmasks */ #define CLKS_EN (1 << 0) /* Clocks Enable */ @@ -126,7 +145,15 @@ struct bfin_sd_host { #define SD_RST (1 << 4) /* SDMMC Reset */ #define PUP_SDDAT (1 << 5) /* Pull-up SD_DAT */ #define PUP_SDDAT3 (1 << 6) /* Pull-up SD_DAT3 */ +#ifndef RSI_BLKSZ #define PD_SDDAT3 (1 << 7) /* Pull-down SD_DAT3 */ +#else +#define PWR_ON 0x600 /* Power On */ +#define SD_CMD_OD (1 << 11) /* Open Drain Output */ +#define BOOT_EN (1 << 12) /* Boot Enable */ +#define BOOT_MODE (1 << 13) /* Alternate Boot Mode */ +#define BOOT_ACK_EN (1 << 14) /* Boot ACK is expected */ +#endif /* SDH_RD_WAIT_EN bitmasks */ #define RWR (1 << 0) /* Read Wait Request */ diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 8a0fed16058..0ca40dd4472 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -41,6 +41,7 @@ #include <asm-generic/bitops/non-atomic.h> #else +#include <asm/barrier.h> #include <asm/byteorder.h> /* swab32 */ #include <linux/linkage.h> diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index fe0ca03a1cb..ca67145c6a4 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -622,10 +622,12 @@ do { \ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ #define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ +#ifdef CONFIG_BF60x #define PAGE_SIZE_16KB 0x00040000 /* 16 KB page size */ #define PAGE_SIZE_64KB 0x00050000 /* 64 KB page size */ #define PAGE_SIZE_16MB 0x00060000 /* 16 MB page size */ #define PAGE_SIZE_64MB 0x00070000 /* 64 MB page size */ +#endif #define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not * mapped to L1 */ diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 9b33e724786..c865b33eeb6 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -335,6 +335,7 @@ struct ddr_config { u32 ddr_clk; u32 dmc_ddrctl; + u32 dmc_effctl; u32 dmc_ddrcfg; u32 dmc_ddrtr0; u32 dmc_ddrtr1; @@ -348,6 +349,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [0] = { .ddr_clk = 125, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20705212, .dmc_ddrtr1 = 0x201003CF, @@ -358,6 +360,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [1] = { .ddr_clk = 133, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20806313, .dmc_ddrtr1 = 0x2013040D, @@ -368,6 +371,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [2] = { .ddr_clk = 150, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20A07323, .dmc_ddrtr1 = 0x20160492, @@ -378,6 +382,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [3] = { .ddr_clk = 166, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20A07323, .dmc_ddrtr1 = 0x2016050E, @@ -388,6 +393,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [4] = { .ddr_clk = 200, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20a07323, .dmc_ddrtr1 = 0x2016050f, @@ -398,6 +404,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [5] = { .ddr_clk = 225, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20E0A424, .dmc_ddrtr1 = 0x302006DB, @@ -408,6 +415,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [6] = { .ddr_clk = 250, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20E0A424, .dmc_ddrtr1 = 0x3020079E, @@ -469,6 +477,7 @@ static inline void init_dmc(u32 dmc_clk) bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2); bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr); bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1); + bfin_write_DMC0_EFFCTL(ddr_config_table[i].dmc_effctl); bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl); break; } diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 34e96ce02aa..b49a53b583d 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -30,6 +30,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) { int i_d, i_i; unsigned long addr; + unsigned long cplb_pageflags, cplb_pagesize; struct cplb_entry *d_tbl = dcplb_tbl[cpu]; struct cplb_entry *i_tbl = icplb_tbl[cpu]; @@ -49,11 +50,20 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) /* Cover kernel memory with 4M pages. */ addr = 0; - for (; addr < memory_start; addr += 4 * 1024 * 1024) { +#ifdef PAGE_SIZE_16MB + cplb_pageflags = PAGE_SIZE_16MB; + cplb_pagesize = SIZE_16M; +#else + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; +#endif + + + for (; addr < memory_start; addr += cplb_pagesize) { d_tbl[i_d].addr = addr; - d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; + d_tbl[i_d++].data = SDRAM_DGENERIC | cplb_pageflags; i_tbl[i_i].addr = addr; - i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; + i_tbl[i_i++].data = SDRAM_IGENERIC | cplb_pageflags; } #ifdef CONFIG_ROMKERNEL diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index e854f9066cb..79cc0f6dcdd 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -145,7 +145,7 @@ MGR_ATTR static int dcplb_miss(int cpu) unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); int idx; - unsigned long d_data, base, addr1, eaddr; + unsigned long d_data, base, addr1, eaddr, cplb_pagesize, cplb_pageflags; nr_dcplb_miss[cpu]++; if (unlikely(status & FAULT_USERSUPV)) @@ -167,18 +167,37 @@ MGR_ATTR static int dcplb_miss(int cpu) if (unlikely(d_data == 0)) return CPLB_NO_ADDR_MATCH; - addr1 = addr & ~(SIZE_4M - 1); addr &= ~(SIZE_1M - 1); d_data |= PAGE_SIZE_1MB; - if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { + + /* BF60x support large than 4M CPLB page size */ +#ifdef PAGE_SIZE_16MB + cplb_pageflags = PAGE_SIZE_16MB; + cplb_pagesize = SIZE_16M; +#else + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; +#endif + +find_pagesize: + addr1 = addr & ~(cplb_pagesize - 1); + if (addr1 >= base && (addr1 + cplb_pagesize) <= eaddr) { /* * This works because * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. */ - d_data |= PAGE_SIZE_4MB; + d_data |= cplb_pageflags; addr = addr1; + goto found_pagesize; + } else { + if (cplb_pagesize > SIZE_4M) { + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; + goto find_pagesize; + } } +found_pagesize: #ifdef CONFIG_BF60x if ((addr >= ASYNC_BANK0_BASE) && (addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)) diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c index 404045dcc5e..5b80d59e66e 100644 --- a/arch/blackfin/kernel/cplbinfo.c +++ b/arch/blackfin/kernel/cplbinfo.c @@ -17,8 +17,13 @@ #include <asm/cplbinit.h> #include <asm/blackfin.h> -static char const page_strtbl[][3] = { "1K", "4K", "1M", "4M" }; -#define page(flags) (((flags) & 0x30000) >> 16) +static char const page_strtbl[][4] = { + "1K", "4K", "1M", "4M", +#ifdef CONFIG_BF60x + "16K", "64K", "16M", "64M", +#endif +}; +#define page(flags) (((flags) & 0x70000) >> 16) #define strpage(flags) page_strtbl[page(flags)] struct cplbinfo_data { diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index fb96e607adc..107b306b06f 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -1314,7 +1314,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid()); } - seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", + seq_printf(m, "\ncpu MHz\t\t: %lu.%06lu/%lu.%06lu\n", cclk/1000000, cclk%1000000, sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 95114ed395a..6a3a14bcd3a 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -455,6 +455,7 @@ static struct platform_device bfin_async_nand_device = { static void bfin_plat_nand_init(void) { gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); + gpio_direction_input(BFIN_NAND_PLAT_READY); } #else static void bfin_plat_nand_init(void) {} diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index a4fce0370c1..755f0dc1201 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -764,7 +764,6 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif /* CONFIG_BF542 */ #endif /* CONFIG_I2C_BLACKFIN_TWI */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) diff --git a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h index 4954cf3f7e1..102ee4025ac 100644 --- a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h +++ b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h @@ -312,6 +312,8 @@ #define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val) #define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL) #define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val) +#define bfin_read_DMC0_EFFCTL() bfin_read32(DMC0_EFFCTL) +#define bfin_write_DMC0_EFFCTL(val) bfin_write32(DMC0_EFFCTL, val) #define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT) #define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val) #define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL) diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 06dd026533e..8769a9045a5 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -264,7 +264,6 @@ config ETRAX_AXISFLASHMAP select MTD_CFI select MTD_CFI_AMDSTD select MTD_JEDECPROBE if ETRAX_ARCH_V32 - select MTD_CHAR select MTD_BLOCK select MTD_COMPLEX_MAPPINGS help diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index af4a486dadc..c55971a40c3 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -404,7 +404,6 @@ config ETRAX_AXISFLASHMAP select MTD_CFI select MTD_CFI_AMDSTD select MTD_JEDECPROBE - select MTD_CHAR select MTD_BLOCK select MTD_COMPLEX_MAPPINGS help diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index 04dff5bdcbf..33a97929d05 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -30,8 +30,6 @@ config HEXAGON select GENERIC_CLOCKEVENTS_BROADCAST select MODULES_USE_ELF_RELA select GENERIC_CPU_DEVICES - select GENERIC_KERNEL_THREAD - select GENERIC_KERNEL_EXECVE ---help--- Qualcomm Hexagon is a processor architecture designed for high performance and low power across a wide variety of applications. @@ -157,9 +155,6 @@ source "mm/Kconfig" source "kernel/Kconfig.hz" -config GENERIC_GPIO - def_bool n - endmenu source "init/Kconfig" diff --git a/arch/hexagon/kernel/vm_entry.S b/arch/hexagon/kernel/vm_entry.S index e3086185fc9..67c6ccc1477 100644 --- a/arch/hexagon/kernel/vm_entry.S +++ b/arch/hexagon/kernel/vm_entry.S @@ -291,12 +291,12 @@ event_dispatch: /* "Nested control path" -- if the previous mode was kernel */ { R0 = memw(R29 + #_PT_ER_VMEST); - R16.L = #LO(do_work_pending); + R26.L = #LO(do_work_pending); } { P0 = tstbit(R0, #HVM_VMEST_UM_SFT); if (!P0.new) jump:nt restore_all; - R16.H = #HI(do_work_pending); + R26.H = #HI(do_work_pending); R0 = #VM_INT_DISABLE; } @@ -304,7 +304,7 @@ event_dispatch: * Check also the return from fork/system call, normally coming back from * user mode * - * R16 needs to have do_work_pending, and R0 should have VM_INT_DISABLE + * R26 needs to have do_work_pending, and R0 should have VM_INT_DISABLE */ check_work_pending: @@ -313,7 +313,7 @@ check_work_pending: { R0 = R29; /* regs should still be at top of stack */ R1 = memw(THREADINFO_REG + #_THREAD_INFO_FLAGS); - callr R16; + callr R26; } { @@ -375,11 +375,11 @@ _K_enter_debug: ret_from_fork: { call schedule_tail - R16.H = #HI(do_work_pending); + R26.H = #HI(do_work_pending); } { P0 = cmp.eq(R24, #0); - R16.L = #LO(do_work_pending); + R26.L = #LO(do_work_pending); R0 = #VM_INT_DISABLE; } if P0 jump check_work_pending diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d393f841ff5..1a2b7749b04 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -101,9 +101,6 @@ config GENERIC_CALIBRATE_DELAY config HAVE_SETUP_PER_CPU_AREA def_bool y -config GENERIC_GPIO - bool - config DMI bool default y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 6de813370b8..821170e5f6e 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -35,9 +35,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config GENERIC_GPIO - bool - config GENERIC_HWEIGHT bool default y diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index b1cfff832fb..33013dfcd3e 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -22,8 +22,7 @@ config M68KCLASSIC config COLDFIRE bool "Coldfire CPU family support" - select GENERIC_GPIO - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 @@ -224,13 +223,25 @@ config M5307 help Motorola ColdFire 5307 processor support. +config M53xx + bool + config M532x bool "MCF532x" depends on !MMU + select M53xx select HAVE_CACHE_CB help Freescale (Motorola) ColdFire 532x processor support. +config M537x + bool "MCF537x" + depends on !MMU + select M53xx + select HAVE_CACHE_CB + help + Freescale ColdFire 537x processor support. + config M5407 bool "MCF5407" depends on !MMU diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index 7240584d343..b9ab0a69561 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -358,6 +358,13 @@ config COBRA5329 help Support for the senTec COBRA5329 board. +config M5373EVB + bool "Freescale M5373EVB board support" + depends on M537x + select FREESCALE + help + Support for the Freescale M5373EVB board. + config M5407C3 bool "Motorola M5407C3 board support" depends on M5407 @@ -539,15 +546,6 @@ config ROMVEC 68000 type variants the vectors are at the base of the boot device on system startup. -config ROMVECSIZE - hex "Size of ROM vector region (in bytes)" - default "0x400" - depends on ROM - help - Define the size of the vector region in ROM. For most 68000 - variants this would be 0x400 bytes in size. Set to 0 if you do - not want a vector region at the start of the ROM. - config ROMSTART hex "Address of the base of system image in ROM" default "0x400" diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 2f02acfb8ed..7f7830f2c5b 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -45,6 +45,7 @@ cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e) cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200) cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200) cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) +cpuflags-$(CONFIG_M537x) := $(call cc-option,-mcpu=537x,-m5307) cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200) cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307) cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) diff --git a/arch/m68k/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h deleted file mode 100644 index 27af3270f67..00000000000 --- a/arch/m68k/include/asm/dbg.h +++ /dev/null @@ -1,6 +0,0 @@ -#define DEBUG 1 -#ifdef CONFIG_COLDFIRE -#define BREAK asm volatile ("halt") -#else -#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 -#endif diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index 0ff3fc6a6d9..429fe26e320 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -39,7 +39,7 @@ #define MAX_M68K_DMA_CHANNELS 4 #elif defined(CONFIG_M5272) #define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M532x) +#elif defined(CONFIG_M53xx) #define MAX_M68K_DMA_CHANNELS 0 #else #define MAX_M68K_DMA_CHANNELS 2 diff --git a/arch/m68k/include/asm/m53xxacr.h b/arch/m68k/include/asm/m53xxacr.h index cd952b0a8bd..3177ce8331d 100644 --- a/arch/m68k/include/asm/m53xxacr.h +++ b/arch/m68k/include/asm/m53xxacr.h @@ -55,8 +55,8 @@ #define CACHE_SIZE 0x2000 /* 8k of unified cache */ #define ICACHE_SIZE CACHE_SIZE #define DCACHE_SIZE CACHE_SIZE -#elif defined(CONFIG_M532x) -#define CACHE_SIZE 0x4000 /* 32k of unified cache */ +#elif defined(CONFIG_M53xx) +#define CACHE_SIZE 0x4000 /* 16k of unified cache */ #define ICACHE_SIZE CACHE_SIZE #define DCACHE_SIZE CACHE_SIZE #endif diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m53xxsim.h index 8668e47ced0..faa1a2133bf 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m53xxsim.h @@ -1,15 +1,15 @@ /****************************************************************************/ /* - * m532xsim.h -- ColdFire 5329 registers + * m53xxsim.h -- ColdFire 5329 registers */ /****************************************************************************/ -#ifndef m532xsim_h -#define m532xsim_h +#ifndef m53xxsim_h +#define m53xxsim_h /****************************************************************************/ -#define CPU_NAME "COLDFIRE(m532x)" +#define CPU_NAME "COLDFIRE(m53xx)" #define CPU_INSTR_PER_JIFFY 3 #define MCF_BUSCLK (MCF_CLK / 3) @@ -107,7 +107,7 @@ /* * QSPI module. */ -#define MCFQSPI_BASE 0xFC058000 /* Base address of QSPI */ +#define MCFQSPI_BASE 0xFC05C000 /* Base address of QSPI */ #define MCFQSPI_SIZE 0x40 /* Size of QSPI region */ #define MCFQSPI_CS0 84 @@ -1238,4 +1238,4 @@ #define MCFEPORT_EPFR (0xFC094006) /********************************************************************/ -#endif /* m532xsim_h */ +#endif /* m53xxsim_h */ diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h index 192bbfeabf7..6d13cae44af 100644 --- a/arch/m68k/include/asm/m54xxacr.h +++ b/arch/m68k/include/asm/m54xxacr.h @@ -96,8 +96,13 @@ */ #define ACR0_MODE (ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \ ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP) +#if defined(CONFIG_CACHE_COPYBACK) #define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ - ACR_ENABLE+ACR_SUPER+ACR_SP) + ACR_ENABLE+ACR_SUPER+ACR_SP+ACR_CM_CP) +#else +#define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ + ACR_ENABLE+ACR_SUPER+ACR_SP+ACR_CM_WT) +#endif #define ACR2_MODE 0 #define ACR3_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ ACR_ENABLE+ACR_SUPER+ACR_SP) diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h index fa1059f50df..c41ebf45f1d 100644 --- a/arch/m68k/include/asm/mcfgpio.h +++ b/arch/m68k/include/asm/mcfgpio.h @@ -104,7 +104,7 @@ static inline void gpio_free(unsigned gpio) #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \ defined(CONFIG_M5441x) /* These parts have GPIO organized by 8 bit ports */ @@ -139,7 +139,7 @@ static inline void gpio_free(unsigned gpio) #if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M5441x) /* * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses * read-modify-write to change an output and a GPIO module which has separate @@ -195,7 +195,7 @@ static inline u32 __mcfgpio_ppdr(unsigned gpio) return MCFSIM2_GPIO1READ; #elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M5441x) #if !defined(CONFIG_M5441x) if (gpio < 8) return MCFEPORT_EPPDR; @@ -237,7 +237,7 @@ static inline u32 __mcfgpio_podr(unsigned gpio) return MCFSIM2_GPIO1WRITE; #elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M5441x) #if !defined(CONFIG_M5441x) if (gpio < 8) return MCFEPORT_EPDR; @@ -279,7 +279,7 @@ static inline u32 __mcfgpio_pddr(unsigned gpio) return MCFSIM2_GPIO1ENABLE; #elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M532x) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M5441x) #if !defined(CONFIG_M5441x) if (gpio < 8) return MCFEPORT_EPDDR; diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h index a04fd9b2714..bc867de8a1e 100644 --- a/arch/m68k/include/asm/mcfsim.h +++ b/arch/m68k/include/asm/mcfsim.h @@ -36,8 +36,8 @@ #elif defined(CONFIG_M5307) #include <asm/m5307sim.h> #include <asm/mcfintc.h> -#elif defined(CONFIG_M532x) -#include <asm/m532xsim.h> +#elif defined(CONFIG_M53xx) +#include <asm/m53xxsim.h> #elif defined(CONFIG_M5407) #include <asm/m5407sim.h> #include <asm/mcfintc.h> diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h index da2fa43c2e4..089f0f150bb 100644 --- a/arch/m68k/include/asm/mcftimer.h +++ b/arch/m68k/include/asm/mcftimer.h @@ -19,7 +19,7 @@ #define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ #define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ #define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ -#if defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if defined(CONFIG_M53xx) || defined(CONFIG_M5441x) #define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ #else #define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile index 02591a109f8..68f0fac6009 100644 --- a/arch/m68k/platform/coldfire/Makefile +++ b/arch/m68k/platform/coldfire/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o -obj-$(CONFIG_M532x) += m532x.o timers.o intc-simr.o reset.o +obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m53xx.c index 7951d1d4335..5286f98fbed 100644 --- a/arch/m68k/platform/coldfire/m532x.c +++ b/arch/m68k/platform/coldfire/m53xx.c @@ -1,7 +1,7 @@ /***************************************************************************/ /* - * linux/arch/m68knommu/platform/532x/config.c + * m53xx.c -- platform support for ColdFire 53xx based boards * * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2000, Lineo (www.lineo.com) @@ -118,7 +118,8 @@ static struct clk * const enable_clks[] __initconst = { &__clk_0_24, /* mcfuart.0 */ &__clk_0_25, /* mcfuart.1 */ &__clk_0_26, /* mcfuart.2 */ - + &__clk_0_28, /* mcftmr.0 */ + &__clk_0_29, /* mcftmr.1 */ &__clk_0_32, /* mcfpit.0 */ &__clk_0_33, /* mcfpit.1 */ &__clk_0_37, /* mcfeport.0 */ @@ -134,8 +135,6 @@ static struct clk * const disable_clks[] __initconst = { &__clk_0_17, /* edma */ &__clk_0_22, /* mcfi2c.0 */ &__clk_0_23, /* mcfqspi.0 */ - &__clk_0_28, /* mcftmr.0 */ - &__clk_0_29, /* mcftmr.1 */ &__clk_0_30, /* mcftmr.2 */ &__clk_0_31, /* mcftmr.3 */ &__clk_0_34, /* mcfpit.2 */ @@ -153,7 +152,7 @@ static struct clk * const disable_clks[] __initconst = { }; -static void __init m532x_clk_init(void) +static void __init m53xx_clk_init(void) { unsigned i; @@ -169,7 +168,7 @@ static void __init m532x_clk_init(void) #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) -static void __init m532x_qspi_init(void) +static void __init m53xx_qspi_init(void) { /* setup QSPS pins for QSPI with gpio CS control */ writew(0x01f0, MCFGPIO_PAR_QSPI); @@ -179,7 +178,7 @@ static void __init m532x_qspi_init(void) /***************************************************************************/ -static void __init m532x_uarts_init(void) +static void __init m53xx_uarts_init(void) { /* UART GPIO initialization */ writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART); @@ -187,7 +186,7 @@ static void __init m532x_uarts_init(void) /***************************************************************************/ -static void __init m532x_fec_init(void) +static void __init m53xx_fec_init(void) { u8 v; @@ -217,11 +216,11 @@ void __init config_BSP(char *commandp, int size) } #endif mach_sched_init = hw_timer_init; - m532x_clk_init(); - m532x_uarts_init(); - m532x_fec_init(); + m53xx_clk_init(); + m53xx_uarts_init(); + m53xx_fec_init(); #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - m532x_qspi_init(); + m53xx_qspi_init(); #endif #ifdef CONFIG_BDM_DISABLE diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c index 51f6d2af807..d06068e4576 100644 --- a/arch/m68k/platform/coldfire/timers.c +++ b/arch/m68k/platform/coldfire/timers.c @@ -36,7 +36,7 @@ */ void coldfire_profile_init(void); -#if defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if defined(CONFIG_M53xx) || defined(CONFIG_M5441x) #define __raw_readtrr __raw_readl #define __raw_writetrr __raw_writel #else diff --git a/arch/metag/Kconfig b/arch/metag/Kconfig index 6f16c146932..dcd94406030 100644 --- a/arch/metag/Kconfig +++ b/arch/metag/Kconfig @@ -52,9 +52,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - def_bool n - config NO_IOPORT def_bool y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 54237af0b07..d22a4ecffff 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -54,9 +54,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - bool - config GENERIC_CSUM def_bool y diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index d2b097a652d..3649a8b150c 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -17,7 +17,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y # CONFIG_EFI_PARTITION is not set -CONFIG_OPT_LIB_ASM=y CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 41cc841091b..d52abb6812f 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -153,7 +153,5 @@ extern void __init xilinx_pci_init(void); static inline void __init xilinx_pci_init(void) { return; } #endif -#include <asm-generic/pci-dma-compat.h> - #endif /* __KERNEL__ */ #endif /* __ASM_MICROBLAZE_PCI_H */ diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index a1ab5f0009e..efe59d88178 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -90,17 +90,25 @@ static inline int ___range_ok(unsigned long addr, unsigned long size) #else -/* - * Address is valid if: - * - "addr", "addr + size" and "size" are all below the limit - */ -#define access_ok(type, addr, size) \ - (get_fs().seg >= (((unsigned long)(addr)) | \ - (size) | ((unsigned long)(addr) + (size)))) - -/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n", - type?"WRITE":"READ",addr,size,get_fs().seg)) */ - +static inline int access_ok(int type, const void __user *addr, + unsigned long size) +{ + if (!size) + goto ok; + + if ((get_fs().seg < ((unsigned long)addr)) || + (get_fs().seg < ((unsigned long)addr + size - 1))) { + pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", + type ? "WRITE" : "READ ", (u32)addr, (u32)size, + (u32)get_fs().seg); + return 0; + } +ok: + pr_debug("ACCESS OK: %s at 0x%08x (size 0x%x), seg 0x%08x\n", + type ? "WRITE" : "READ ", (u32)addr, (u32)size, + (u32)get_fs().seg); + return 1; +} #endif #ifdef CONFIG_MMU diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 0b2299bcb94..410398f6db5 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -37,6 +37,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"8.20.a", 0x15}, {"8.20.b", 0x16}, {"8.30.a", 0x17}, + {"8.40.a", 0x18}, + {"8.40.b", 0x19}, {NULL, 0}, }; @@ -57,6 +59,9 @@ const struct family_string_key family_string_lookup[] = { {"virtex6", 0xe}, /* FIXME There is no key code defined for spartan2 */ {"spartan2", 0xf0}, + {"kintex7", 0x10}, + {"artix7", 0x11}, + {"zynq7000", 0x12}, {NULL, 0}, }; diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index eef84de5e8c..fcc797feb9d 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -112,16 +112,16 @@ no_fdt_arg: * copy command line directly to cmd_line placed in data section. */ beqid r5, skip /* Skip if NULL pointer */ - or r6, r0, r0 /* incremment */ + or r11, r0, r0 /* incremment */ ori r4, r0, cmd_line /* load address of command line */ tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: /* r2=r5+r6 - r5 contain pointer to command line */ - lbu r2, r5, r6 + lbu r2, r5, r11 beqid r2, skip /* Skip if no data */ - sb r2, r4, r6 /* addr[r4+r6]= r2*/ - addik r6, r6, 1 /* increment counting */ + sb r2, r4, r11 /* addr[r4+r6]= r2 */ + addik r11, r11, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ addik r3, r3, -1 /* decrement loop */ addik r5, r4, 0 /* add new space for command line */ @@ -131,13 +131,13 @@ skip: #ifdef NOT_COMPILE /* save bram context */ - or r6, r0, r0 /* incremment */ + or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */ ori r3, r0, (LMB_SIZE - 4) _copy_bram: - lw r7, r0, r6 /* r7 = r0 + r6 */ - sw r7, r4, r6 /* addr[r4 + r6] = r7*/ - addik r6, r6, 4 /* increment counting */ + lw r7, r0, r11 /* r7 = r0 + r6 */ + sw r7, r4, r11 /* addr[r4 + r6] = r7 */ + addik r11, r11, 4 /* increment counting */ bgtid r3, _copy_bram /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ #endif @@ -303,8 +303,8 @@ jump_over2: * the exception vectors, using a 4k real==virtual mapping. */ /* Use temporary TLB_ID for LMB - clear this temporary mapping later */ - ori r6, r0, MICROBLAZE_LMB_TLB_ID - mts rtlbx,r6 + ori r11, r0, MICROBLAZE_LMB_TLB_ID + mts rtlbx,r11 ori r4,r0,(TLB_WR | TLB_EX) ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index 8778adf72bd..d85fa3a2b0f 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -172,4 +172,6 @@ void __init init_IRQ(void) * and commits this patch. ~~gcl */ root_domain = irq_domain_add_linear(intc, nr_irq, &xintc_irq_domain_ops, (void *)intr_mask); + + irq_set_default_host(root_domain); } diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index a5589380727..7d1a9c8b1f3 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -160,3 +160,8 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs) return 0; /* MicroBlaze has no separate FPU registers */ } #endif /* CONFIG_MMU */ + +void arch_cpu_idle(void) +{ + local_irq_enable(); +} diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 4ec137d13ad..b38ae3acfeb 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -404,10 +404,11 @@ asmlinkage void __init mmu_init(void) #if defined(CONFIG_BLK_DEV_INITRD) /* Remove the init RAM disk from the available memory. */ -/* if (initrd_start) { - mem_pieces_remove(&phys_avail, __pa(initrd_start), - initrd_end - initrd_start, 1); - }*/ + if (initrd_start) { + unsigned long size; + size = initrd_end - initrd_start; + memblock_reserve(virt_to_phys(initrd_start), size); + } #endif /* CONFIG_BLK_DEV_INITRD */ /* Initialize the MMU hardware */ diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 9ea521e4959..bdb8ea100e7 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -30,7 +30,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_pci.h> -#include <linux/pci.h> #include <linux/export.h> #include <asm/processor.h> diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild index 7dd65cfae83..d2cfe45f332 100644 --- a/arch/mips/Kbuild +++ b/arch/mips/Kbuild @@ -17,3 +17,7 @@ obj- := $(platform-) obj-y += kernel/ obj-y += mm/ obj-y += math-emu/ + +ifdef CONFIG_KVM +obj-y += kvm/ +endif diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5f3794744f..7a58ab933b2 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -61,8 +61,7 @@ config MIPS_ALCHEMY select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select GENERIC_GPIO - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_ZBOOT select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI @@ -225,7 +224,6 @@ config MACH_JZ4740 select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_CPU - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select SYS_HAS_EARLY_PRINTK select HAVE_PWM @@ -306,7 +304,6 @@ config MIPS_MALTA select HW_HAS_PCI select I8253 select I8259 - select MIPS_BOARDS_GEN select MIPS_BONITO64 select MIPS_CPU_SCACHE select PCI_GT64XXX_PCI0 @@ -337,12 +334,12 @@ config MIPS_SEAD3 select BOOT_RAW select CEVT_R4K select CSRC_R4K + select CSRC_GIC select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select DMA_NONCOHERENT select IRQ_CPU select IRQ_GIC - select MIPS_BOARDS_GEN select MIPS_CPU_SCACHE select MIPS_MSC select SYS_HAS_CPU_MIPS32_R1 @@ -354,6 +351,7 @@ config MIPS_SEAD3 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_MICROMIPS select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -912,6 +910,9 @@ config CEVT_GT641XX config CEVT_R4K bool +config CEVT_GIC + bool + config CEVT_SB1250 bool @@ -937,7 +938,6 @@ config CSRC_SB1250 bool config GPIO_TXX9 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB bool @@ -985,9 +985,6 @@ config MIPS_MSC config MIPS_NILE4 bool -config MIPS_DISABLE_OBSOLETE_IDE - bool - config SYNC_R4K bool @@ -1009,9 +1006,6 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN config ISA_DMA_API bool -config GENERIC_GPIO - bool - config HOLES_IN_ZONE bool @@ -1081,9 +1075,6 @@ config IRQ_GT641XX config IRQ_GIC bool -config MIPS_BOARDS_GEN - bool - config PCI_GT64XXX_PCI0 bool @@ -1112,7 +1103,6 @@ config SOC_PNX833X select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_GPIO select CPU_MIPSR2_IRQ_VI config SOC_PNX8335 @@ -1154,7 +1144,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL + default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X default "6" if MIPS_CPU_SCACHE default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON default "5" @@ -1203,7 +1193,6 @@ config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F select CPU_LOONGSON2 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set @@ -1244,6 +1233,7 @@ config CPU_MIPS32_R2 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select HAVE_KVM help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture. Most modern embedded systems with a 32-bit @@ -1744,6 +1734,20 @@ config 64BIT endchoice +config KVM_GUEST + bool "KVM Guest Kernel" + help + Select this option if building a guest kernel for KVM (Trap & Emulate) mode + +config KVM_HOST_FREQ + int "KVM Host Processor Frequency (MHz)" + depends on KVM_GUEST + default 500 + help + Select this option if building a guest kernel for KVM to skip + RTC emulation when determining guest CPU Frequency. Instead, the guest + processor frequency is automatically derived from the host frequency. + choice prompt "Kernel page size" default PAGE_SIZE_4KB @@ -1819,6 +1823,15 @@ config FORCE_MAX_ZONEORDER The page size is not necessarily 4KB. Keep this in mind when choosing a value for this option. +config CEVT_GIC + bool "Use GIC global counter for clock events" + depends on IRQ_GIC && !(MIPS_SEAD3 || MIPS_MT_SMTC) + help + Use the GIC global counter for the clock events. The R4K clock + event driver is always present, so if the platform ends up not + detecting a GIC, it will fall back to the R4K timer for the + generation of clock events. + config BOARD_SCACHE bool @@ -2024,6 +2037,7 @@ config SB1_PASS_2_1_WORKAROUNDS depends on CPU_SB1 && CPU_SB1_PASS_2 default y + config 64BIT_PHYS_ADDR bool @@ -2042,6 +2056,13 @@ config CPU_HAS_SMARTMIPS you don't know you probably don't have SmartMIPS and should say N here. +config CPU_MICROMIPS + depends on SYS_SUPPORTS_MICROMIPS + bool "Build kernel using microMIPS ISA" + help + When this option is enabled the kernel will be built using the + microMIPS ISA + config CPU_HAS_WB bool @@ -2104,6 +2125,9 @@ config SYS_SUPPORTS_HIGHMEM config SYS_SUPPORTS_SMARTMIPS bool +config SYS_SUPPORTS_MICROMIPS + bool + config ARCH_FLATMEM_ENABLE def_bool y depends on !NUMA && !CPU_LOONGSON2 @@ -2564,3 +2588,5 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" + +source "arch/mips/kvm/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 6f7978f9509..dd58a04ef4b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -114,6 +114,7 @@ cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*e cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips) +cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips -mno-jals) cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index c8862bdc2ff..7032ac7ecd1 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -31,7 +31,6 @@ config MIPS_DB1000 select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -41,7 +40,6 @@ config MIPS_DB1235 select ARCH_REQUIRE_GPIOLIB select HW_HAS_PCI select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -57,7 +55,6 @@ config MIPS_GPR select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index fa1bdd1aea1..b3afcdd8d77 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -5,32 +5,14 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ # -# AMD Alchemy Pb1100 eval board -# -platform-$(CONFIG_MIPS_PB1100) += alchemy/devboards/ -load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 - -# -# AMD Alchemy Pb1500 eval board -# -platform-$(CONFIG_MIPS_PB1500) += alchemy/devboards/ -load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 - -# -# AMD Alchemy Pb1550 eval board -# -platform-$(CONFIG_MIPS_PB1550) += alchemy/devboards/ -load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 - -# -# AMD Alchemy Db1000/Db1500/Db1100 eval boards +# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100 eval boards # platform-$(CONFIG_MIPS_DB1000) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 # -# AMD Alchemy Db1200/Pb1200/Db1550/Db1300 eval boards +# AMD Alchemy Db1200/Pb1200/Db1550/Pb1550/Db1300 eval boards # platform-$(CONFIG_MIPS_DB1235) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1235) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c index 28abfeef09d..92dfa481205 100644 --- a/arch/mips/ar7/memory.c +++ b/arch/mips/ar7/memory.c @@ -30,7 +30,6 @@ #include <asm/sections.h> #include <asm/mach-ar7/ar7.h> -#include <asm/mips-boards/prom.h> static int __init memsize(void) { diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index d5b3c905701..a0233a2c198 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -51,20 +51,6 @@ static void ath79_halt(void) cpu_wait(); } -static void __init ath79_detect_mem_size(void) -{ - unsigned long size; - - for (size = ATH79_MEM_SIZE_MIN; size < ATH79_MEM_SIZE_MAX; - size <<= 1) { - if (!memcmp(ath79_detect_mem_size, - ath79_detect_mem_size + size, 1024)) - break; - } - - add_memory_region(0, size, BOOT_MEM_RAM); -} - static void __init ath79_detect_sys_type(void) { char *chip = "????"; @@ -212,7 +198,7 @@ void __init plat_mem_setup(void) AR71XX_DDR_CTRL_SIZE); ath79_detect_sys_type(); - ath79_detect_mem_size(); + detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); ath79_clocks_init(); _machine_restart = ath79_restart; diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig index d03e8799d1c..5639662fd50 100644 --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig @@ -25,6 +25,10 @@ config BCM63XX_CPU_6358 bool "support 6358 CPU" select HW_HAS_PCI +config BCM63XX_CPU_6362 + bool "support 6362 CPU" + select HW_HAS_PCI + config BCM63XX_CPU_6368 bool "support 6368 CPU" select HW_HAS_PCI diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 9aa7d44898e..a9505c4867e 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -726,11 +726,11 @@ void __init board_prom_init(void) u32 val; /* read base address of boot chip select (0) - * 6328 does not have MPI but boots from a fixed address + * 6328/6362 do not have MPI but boot from a fixed address */ - if (BCMCPU_IS_6328()) + if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { val = 0x18000000; - else { + } else { val = bcm_mpi_readl(MPI_CSBASE_REG(0)); val &= MPI_CSBASE_BASE_MASK; } diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c index b9e948d5943..c726a97fc79 100644 --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c @@ -15,7 +15,13 @@ #include <bcm63xx_io.h> #include <bcm63xx_regs.h> #include <bcm63xx_reset.h> -#include <bcm63xx_clk.h> + +struct clk { + void (*set)(struct clk *, int); + unsigned int rate; + unsigned int usage; + int id; +}; static DEFINE_MUTEX(clocks_mutex); @@ -119,11 +125,18 @@ static struct clk clk_ephy = { */ static void enetsw_set(struct clk *clk, int enable) { - if (!BCMCPU_IS_6368()) + if (BCMCPU_IS_6328()) + bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable); + else if (BCMCPU_IS_6368()) + bcm_hwclock_set(CKCTL_6368_ROBOSW_EN | + CKCTL_6368_SWPKT_USB_EN | + CKCTL_6368_SWPKT_SAR_EN, + enable); + else return; - bcm_hwclock_set(CKCTL_6368_ROBOSW_EN | - CKCTL_6368_SWPKT_USB_EN | - CKCTL_6368_SWPKT_SAR_EN, enable); + if (enable) { /* reset switch core afer clock change */ bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1); @@ -160,6 +173,8 @@ static void usbh_set(struct clk *clk, int enable) bcm_hwclock_set(CKCTL_6328_USBH_EN, enable); else if (BCMCPU_IS_6348()) bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_USBH_EN, enable); else if (BCMCPU_IS_6368()) bcm_hwclock_set(CKCTL_6368_USBH_EN, enable); } @@ -175,6 +190,8 @@ static void usbd_set(struct clk *clk, int enable) { if (BCMCPU_IS_6328()) bcm_hwclock_set(CKCTL_6328_USBD_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_USBD_EN, enable); else if (BCMCPU_IS_6368()) bcm_hwclock_set(CKCTL_6368_USBD_EN, enable); } @@ -196,6 +213,8 @@ static void spi_set(struct clk *clk, int enable) mask = CKCTL_6348_SPI_EN; else if (BCMCPU_IS_6358()) mask = CKCTL_6358_SPI_EN; + else if (BCMCPU_IS_6362()) + mask = CKCTL_6362_SPI_EN; else /* BCMCPU_IS_6368 */ mask = CKCTL_6368_SPI_EN; @@ -236,7 +255,10 @@ static struct clk clk_xtm = { */ static void ipsec_set(struct clk *clk, int enable) { - bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable); + if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_IPSEC_EN, enable); + else if (BCMCPU_IS_6368()) + bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable); } static struct clk clk_ipsec = { @@ -249,7 +271,10 @@ static struct clk clk_ipsec = { static void pcie_set(struct clk *clk, int enable) { - bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable); + if (BCMCPU_IS_6328()) + bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable); } static struct clk clk_pcie = { @@ -315,9 +340,9 @@ struct clk *clk_get(struct device *dev, const char *id) return &clk_periph; if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) return &clk_pcm; - if (BCMCPU_IS_6368() && !strcmp(id, "ipsec")) + if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec")) return &clk_ipsec; - if (BCMCPU_IS_6328() && !strcmp(id, "pcie")) + if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie")) return &clk_pcie; return ERR_PTR(-ENOENT); } diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index a7afb289b15..79fe32df5e9 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -25,7 +25,7 @@ const int *bcm63xx_irqs; EXPORT_SYMBOL(bcm63xx_irqs); static u16 bcm63xx_cpu_id; -static u16 bcm63xx_cpu_rev; +static u8 bcm63xx_cpu_rev; static unsigned int bcm63xx_cpu_freq; static unsigned int bcm63xx_memory_size; @@ -71,6 +71,15 @@ static const int bcm6358_irqs[] = { }; +static const unsigned long bcm6362_regs_base[] = { + __GEN_CPU_REGS_TABLE(6362) +}; + +static const int bcm6362_irqs[] = { + __GEN_CPU_IRQ_TABLE(6362) + +}; + static const unsigned long bcm6368_regs_base[] = { __GEN_CPU_REGS_TABLE(6368) }; @@ -87,7 +96,7 @@ u16 __bcm63xx_get_cpu_id(void) EXPORT_SYMBOL(__bcm63xx_get_cpu_id); -u16 bcm63xx_get_cpu_rev(void) +u8 bcm63xx_get_cpu_rev(void) { return bcm63xx_cpu_rev; } @@ -169,6 +178,42 @@ static unsigned int detect_cpu_clock(void) return (16 * 1000000 * n1 * n2) / m1; } + case BCM6362_CPU_ID: + { + unsigned int tmp, mips_pll_fcvo; + + tmp = bcm_misc_readl(MISC_STRAPBUS_6362_REG); + mips_pll_fcvo = (tmp & STRAPBUS_6362_FCVO_MASK) + >> STRAPBUS_6362_FCVO_SHIFT; + switch (mips_pll_fcvo) { + case 0x03: + case 0x0b: + case 0x13: + case 0x1b: + return 240000000; + case 0x04: + case 0x0c: + case 0x14: + case 0x1c: + return 160000000; + case 0x05: + case 0x0e: + case 0x16: + case 0x1e: + case 0x1f: + return 400000000; + case 0x06: + return 440000000; + case 0x07: + case 0x17: + return 384000000; + case 0x15: + case 0x1d: + return 200000000; + default: + return 320000000; + } + } case BCM6368_CPU_ID: { unsigned int tmp, p1, p2, ndiv, m1; @@ -205,7 +250,7 @@ static unsigned int detect_memory_size(void) unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; u32 val; - if (BCMCPU_IS_6328()) + if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) return bcm_ddr_readl(DDR_CSEND_REG) << 24; if (BCMCPU_IS_6345()) { @@ -240,53 +285,27 @@ static unsigned int detect_memory_size(void) void __init bcm63xx_cpu_init(void) { - unsigned int tmp, expected_cpu_id; + unsigned int tmp; struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int cpu = smp_processor_id(); + u32 chipid_reg; /* soc registers location depends on cpu type */ - expected_cpu_id = 0; + chipid_reg = 0; switch (c->cputype) { case CPU_BMIPS3300: - if ((read_c0_prid() & 0xff00) == PRID_IMP_BMIPS3300_ALT) { - expected_cpu_id = BCM6348_CPU_ID; - bcm63xx_regs_base = bcm6348_regs_base; - bcm63xx_irqs = bcm6348_irqs; - } else { + if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT) __cpu_name[cpu] = "Broadcom BCM6338"; - expected_cpu_id = BCM6338_CPU_ID; - bcm63xx_regs_base = bcm6338_regs_base; - bcm63xx_irqs = bcm6338_irqs; - } - break; + /* fall-through */ case CPU_BMIPS32: - expected_cpu_id = BCM6345_CPU_ID; - bcm63xx_regs_base = bcm6345_regs_base; - bcm63xx_irqs = bcm6345_irqs; + chipid_reg = BCM_6345_PERF_BASE; break; case CPU_BMIPS4350: - if ((read_c0_prid() & 0xf0) == 0x10) { - expected_cpu_id = BCM6358_CPU_ID; - bcm63xx_regs_base = bcm6358_regs_base; - bcm63xx_irqs = bcm6358_irqs; - } else { - /* all newer chips have the same chip id location */ - u16 chip_id = bcm_readw(BCM_6368_PERF_BASE); - - switch (chip_id) { - case BCM6328_CPU_ID: - expected_cpu_id = BCM6328_CPU_ID; - bcm63xx_regs_base = bcm6328_regs_base; - bcm63xx_irqs = bcm6328_irqs; - break; - case BCM6368_CPU_ID: - expected_cpu_id = BCM6368_CPU_ID; - bcm63xx_regs_base = bcm6368_regs_base; - bcm63xx_irqs = bcm6368_irqs; - break; - } - } + if ((read_c0_prid() & 0xf0) == 0x10) + chipid_reg = BCM_6345_PERF_BASE; + else + chipid_reg = BCM_6368_PERF_BASE; break; } @@ -294,20 +313,47 @@ void __init bcm63xx_cpu_init(void) * really early to panic, but delaying panic would not help since we * will never get any working console */ - if (!expected_cpu_id) + if (!chipid_reg) panic("unsupported Broadcom CPU"); - /* - * bcm63xx_regs_base is set, we can access soc registers - */ - - /* double check CPU type */ - tmp = bcm_perf_readl(PERF_REV_REG); + /* read out CPU type */ + tmp = bcm_readl(chipid_reg); bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; - if (bcm63xx_cpu_id != expected_cpu_id) - panic("bcm63xx CPU id mismatch"); + switch (bcm63xx_cpu_id) { + case BCM6328_CPU_ID: + bcm63xx_regs_base = bcm6328_regs_base; + bcm63xx_irqs = bcm6328_irqs; + break; + case BCM6338_CPU_ID: + bcm63xx_regs_base = bcm6338_regs_base; + bcm63xx_irqs = bcm6338_irqs; + break; + case BCM6345_CPU_ID: + bcm63xx_regs_base = bcm6345_regs_base; + bcm63xx_irqs = bcm6345_irqs; + break; + case BCM6348_CPU_ID: + bcm63xx_regs_base = bcm6348_regs_base; + bcm63xx_irqs = bcm6348_irqs; + break; + case BCM6358_CPU_ID: + bcm63xx_regs_base = bcm6358_regs_base; + bcm63xx_irqs = bcm6358_irqs; + break; + case BCM6362_CPU_ID: + bcm63xx_regs_base = bcm6362_regs_base; + bcm63xx_irqs = bcm6362_irqs; + break; + case BCM6368_CPU_ID: + bcm63xx_regs_base = bcm6368_regs_base; + bcm63xx_irqs = bcm6368_irqs; + break; + default: + panic("unsupported broadcom CPU %x", bcm63xx_cpu_id); + break; + } bcm63xx_cpu_freq = detect_cpu_clock(); bcm63xx_memory_size = detect_memory_size(); diff --git a/arch/mips/bcm63xx/dev-flash.c b/arch/mips/bcm63xx/dev-flash.c index 58371c7deac..588d1ec622e 100644 --- a/arch/mips/bcm63xx/dev-flash.c +++ b/arch/mips/bcm63xx/dev-flash.c @@ -77,6 +77,12 @@ static int __init bcm63xx_detect_flash_type(void) return BCM63XX_FLASH_TYPE_PARALLEL; else return BCM63XX_FLASH_TYPE_SERIAL; + case BCM6362_CPU_ID: + val = bcm_misc_readl(MISC_STRAPBUS_6362_REG); + if (val & STRAPBUS_6362_BOOT_SEL_SERIAL) + return BCM63XX_FLASH_TYPE_SERIAL; + else + return BCM63XX_FLASH_TYPE_NAND; case BCM6368_CPU_ID: val = bcm_gpio_readl(GPIO_STRAPBUS_REG); switch (val & STRAPBUS_6368_BOOT_SEL_MASK) { diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e97fd60e92e..3065bb61820 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -22,10 +22,6 @@ /* * register offsets */ -static const unsigned long bcm6338_regs_spi[] = { - __GEN_SPI_REGS_TABLE(6338) -}; - static const unsigned long bcm6348_regs_spi[] = { __GEN_SPI_REGS_TABLE(6348) }; @@ -34,23 +30,15 @@ static const unsigned long bcm6358_regs_spi[] = { __GEN_SPI_REGS_TABLE(6358) }; -static const unsigned long bcm6368_regs_spi[] = { - __GEN_SPI_REGS_TABLE(6368) -}; - const unsigned long *bcm63xx_regs_spi; EXPORT_SYMBOL(bcm63xx_regs_spi); static __init void bcm63xx_spi_regs_init(void) { - if (BCMCPU_IS_6338()) - bcm63xx_regs_spi = bcm6338_regs_spi; - if (BCMCPU_IS_6348()) + if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) bcm63xx_regs_spi = bcm6348_regs_spi; - if (BCMCPU_IS_6358()) + if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) bcm63xx_regs_spi = bcm6358_regs_spi; - if (BCMCPU_IS_6368()) - bcm63xx_regs_spi = bcm6368_regs_spi; } #else static __init void bcm63xx_spi_regs_init(void) { } @@ -93,13 +81,13 @@ int __init bcm63xx_spi_register(void) spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { - spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; - spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; - spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; - spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; + spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1; + spi_pdata.fifo_size = SPI_6348_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6348_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH; } - if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { + if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index da24c2bd9b7..c0ab3887f42 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -82,6 +82,17 @@ static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused; #define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6358 #define ext_irq_cfg_reg2 0 #endif +#ifdef CONFIG_BCM63XX_CPU_6362 +#define irq_stat_reg PERF_IRQSTAT_6362_REG +#define irq_mask_reg PERF_IRQMASK_6362_REG +#define irq_bits 64 +#define is_ext_irq_cascaded 1 +#define ext_irq_start (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE) +#define ext_irq_end (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE) +#define ext_irq_count 4 +#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6362 +#define ext_irq_cfg_reg2 0 +#endif #ifdef CONFIG_BCM63XX_CPU_6368 #define irq_stat_reg PERF_IRQSTAT_6368_REG #define irq_mask_reg PERF_IRQMASK_6368_REG @@ -170,6 +181,16 @@ static void bcm63xx_init_irq(void) ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE; ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358; break; + case BCM6362_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6362_REG; + irq_mask_addr += PERF_IRQMASK_6362_REG; + irq_bits = 64; + ext_irq_count = 4; + is_ext_irq_cascaded = 1; + ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE; + ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE; + ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362; + break; case BCM6368_CPU_ID: irq_stat_addr += PERF_IRQSTAT_6368_REG; irq_mask_addr += PERF_IRQMASK_6368_REG; @@ -458,6 +479,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d, case BCM6338_CPU_ID: case BCM6345_CPU_ID: case BCM6358_CPU_ID: + case BCM6362_CPU_ID: case BCM6368_CPU_ID: if (levelsense) reg |= EXTIRQ_CFG_LEVELSENSE(irq); diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index 10eaff45807..fd698087fbf 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -36,6 +36,8 @@ void __init prom_init(void) mask = CKCTL_6348_ALL_SAFE_EN; else if (BCMCPU_IS_6358()) mask = CKCTL_6358_ALL_SAFE_EN; + else if (BCMCPU_IS_6362()) + mask = CKCTL_6362_ALL_SAFE_EN; else if (BCMCPU_IS_6368()) mask = CKCTL_6368_ALL_SAFE_EN; else diff --git a/arch/mips/bcm63xx/reset.c b/arch/mips/bcm63xx/reset.c index 68a31bb90cb..317931c6cf5 100644 --- a/arch/mips/bcm63xx/reset.c +++ b/arch/mips/bcm63xx/reset.c @@ -85,6 +85,20 @@ #define BCM6358_RESET_PCIE 0 #define BCM6358_RESET_PCIE_EXT 0 +#define BCM6362_RESET_SPI SOFTRESET_6362_SPI_MASK +#define BCM6362_RESET_ENET 0 +#define BCM6362_RESET_USBH SOFTRESET_6362_USBH_MASK +#define BCM6362_RESET_USBD SOFTRESET_6362_USBS_MASK +#define BCM6362_RESET_DSL 0 +#define BCM6362_RESET_SAR SOFTRESET_6362_SAR_MASK +#define BCM6362_RESET_EPHY SOFTRESET_6362_EPHY_MASK +#define BCM6362_RESET_ENETSW SOFTRESET_6362_ENETSW_MASK +#define BCM6362_RESET_PCM SOFTRESET_6362_PCM_MASK +#define BCM6362_RESET_MPI 0 +#define BCM6362_RESET_PCIE (SOFTRESET_6362_PCIE_MASK | \ + SOFTRESET_6362_PCIE_CORE_MASK) +#define BCM6362_RESET_PCIE_EXT SOFTRESET_6362_PCIE_EXT_MASK + #define BCM6368_RESET_SPI SOFTRESET_6368_SPI_MASK #define BCM6368_RESET_ENET 0 #define BCM6368_RESET_USBH SOFTRESET_6368_USBH_MASK @@ -119,6 +133,10 @@ static const u32 bcm6358_reset_bits[] = { __GEN_RESET_BITS_TABLE(6358) }; +static const u32 bcm6362_reset_bits[] = { + __GEN_RESET_BITS_TABLE(6362) +}; + static const u32 bcm6368_reset_bits[] = { __GEN_RESET_BITS_TABLE(6368) }; @@ -140,6 +158,9 @@ static int __init bcm63xx_reset_bits_init(void) } else if (BCMCPU_IS_6358()) { reset_reg = PERF_SOFTRESET_6358_REG; bcm63xx_reset_bits = bcm6358_reset_bits; + } else if (BCMCPU_IS_6362()) { + reset_reg = PERF_SOFTRESET_6362_REG; + bcm63xx_reset_bits = bcm6362_reset_bits; } else if (BCMCPU_IS_6368()) { reset_reg = PERF_SOFTRESET_6368_REG; bcm63xx_reset_bits = bcm6368_reset_bits; @@ -182,6 +203,13 @@ static const u32 bcm63xx_reset_bits[] = { #define reset_reg PERF_SOFTRESET_6358_REG #endif +#ifdef CONFIG_BCM63XX_CPU_6362 +static const u32 bcm63xx_reset_bits[] = { + __GEN_RESET_BITS_TABLE(6362) +}; +#define reset_reg PERF_SOFTRESET_6362_REG +#endif + #ifdef CONFIG_BCM63XX_CPU_6368 static const u32 bcm63xx_reset_bits[] = { __GEN_RESET_BITS_TABLE(6368) diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index 35e18e98beb..24a24445db6 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -83,6 +83,9 @@ void bcm63xx_machine_reboot(void) case BCM6358_CPU_ID: perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358; break; + case BCM6362_CPU_ID: + perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362; + break; } for (i = 0; i < 2; i++) { @@ -126,7 +129,7 @@ static void __bcm63xx_machine_reboot(char *p) const char *get_system_type(void) { static char buf[128]; - snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)", + snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)", board_get_name(), bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); return buf; diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 156aa6143e1..a22f06a6f7c 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -1032,9 +1032,8 @@ static int octeon_irq_gpio_map_common(struct irq_domain *d, if (!octeon_irq_virq_in_range(virq)) return -EINVAL; - hw += gpiod->base_hwirq; - line = hw >> 6; - bit = hw & 63; + line = (hw + gpiod->base_hwirq) >> 6; + bit = (hw + gpiod->base_hwirq) & 63; if (line > line_limit || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index cd732e5b4fd..ce1d3eeeb73 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -2,30 +2,21 @@ CONFIG_MIPS_MALTA=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_CPU_MIPS32_R2=y CONFIG_MIPS_MT_SMP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_PID_NS=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_RELAY=y CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PCI=y -CONFIG_PM=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM_USER=m @@ -41,8 +32,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y @@ -65,7 +54,6 @@ CONFIG_IPV6_MROUTE=y CONFIG_IPV6_PIMSM_V2=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y @@ -136,23 +124,15 @@ CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m -CONFIG_IP_VS_FTP=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -162,8 +142,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m @@ -173,7 +151,6 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m @@ -247,12 +224,10 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y CONFIG_RFKILL=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=m CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_OOPS=m @@ -271,7 +246,6 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -# CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_IDE_GENERIC=y @@ -317,13 +291,19 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_NETDEVICES=y -CONFIG_IFB=m -CONFIG_DUMMY=m CONFIG_BONDING=m -CONFIG_MACVLAN=m +CONFIG_DUMMY=m CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_MACVLAN=m CONFIG_TUN=m CONFIG_VETH=m +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_PCNET32=y +CONFIG_CHELSIO_T3=m +CONFIG_AX88796=m +CONFIG_NETXEN_NIC=m +CONFIG_TC35815=m CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m @@ -334,14 +314,6 @@ CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m CONFIG_ICPLUS_PHY=m CONFIG_REALTEK_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -CONFIG_AX88796=m -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_TC35815=m -CONFIG_CHELSIO_T3=m -CONFIG_NETXEN_NIC=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PRISM54=m @@ -352,15 +324,7 @@ CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y CONFIG_LIBERTAS=m -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO_I8042 is not set @@ -373,12 +337,6 @@ CONFIG_FB_CIRRUS=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_HID=m -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_IDE_DISK=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y CONFIG_UIO=m @@ -398,7 +356,6 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y -CONFIG_AUTOFS_FS=y CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y @@ -425,7 +382,6 @@ CONFIG_ROMFS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y @@ -466,7 +422,6 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_LRW=m diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig new file mode 100644 index 00000000000..341bb47204d --- /dev/null +++ b/arch/mips/configs/malta_kvm_defconfig @@ -0,0 +1,456 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_PAGE_SIZE_16KB=y +CONFIG_MIPS_MT_SMP=y +CONFIG_HZ_100=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PCI=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_SCTP=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_PHONET=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_CLS_IND=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_MESH=y +CONFIG_RFKILL=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CONNECTOR=m +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_OOPS=m +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_GLUEBI=m +CONFIG_BLK_DEV_FD=m +CONFIG_BLK_DEV_UMEM=m +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_ATA_OVER_ETH=m +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_BLK_DEV_IT8213=m +CONFIG_BLK_DEV_TC86C001=m +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_FC_ATTRS=m +CONFIG_ISCSI_TCP=m +CONFIG_BLK_DEV_3W_XXXX_RAID=m +CONFIG_SCSI_3W_9XXX=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_AACRAID=m +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +# CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_PCNET32=y +CONFIG_CHELSIO_T3=m +CONFIG_AX88796=m +CONFIG_NETXEN_NIC=m +CONFIG_TC35815=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +CONFIG_LIBERTAS=m +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_HID=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_REISERFS_FS=m +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_QUOTA=y +CONFIG_QFMT_V2=y +CONFIG_FUSE_FS=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=m +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_ROMFS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC16=m +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +CONFIG_KVM_MIPS_DYN_TRANS=y +CONFIG_KVM_MIPS_DEBUG_COP0_COUNTERS=y +CONFIG_VHOST_NET=m diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig new file mode 100644 index 00000000000..2b8558b7108 --- /dev/null +++ b/arch/mips/configs/malta_kvm_guest_defconfig @@ -0,0 +1,453 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_KVM_GUEST=y +CONFIG_PAGE_SIZE_16KB=y +CONFIG_HZ_100=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PCI=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_SCTP=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_PHONET=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_CLS_IND=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_MESH=y +CONFIG_RFKILL=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CONNECTOR=m +CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_OOPS=m +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_GLUEBI=m +CONFIG_BLK_DEV_FD=m +CONFIG_BLK_DEV_UMEM=m +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_BLK_DEV_IT8213=m +CONFIG_BLK_DEV_TC86C001=m +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_FC_ATTRS=m +CONFIG_ISCSI_TCP=m +CONFIG_BLK_DEV_3W_XXXX_RAID=m +CONFIG_SCSI_3W_9XXX=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_AACRAID=m +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +# CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +CONFIG_PCNET32=y +CONFIG_CHELSIO_T3=m +CONFIG_AX88796=m +CONFIG_NETXEN_NIC=m +CONFIG_TC35815=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +CONFIG_LIBERTAS=m +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_HID=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_REISERFS_FS=m +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_QUOTA=y +CONFIG_QFMT_V2=y +CONFIG_FUSE_FS=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=m +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_ROMFS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC16=m diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig new file mode 100644 index 00000000000..93057a760df --- /dev/null +++ b/arch/mips/configs/maltaaprp_defconfig @@ -0,0 +1,195 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_VPE_APSP_API=y +CONFIG_HZ_100=y +CONFIG_LOCALVERSION="aprp" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +# CONFIG_INET_LRO is not set +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_CLS_IND=y +# CONFIG_WIRELESS is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_IDE=y +# CONFIG_IDE_PROC_FS is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +CONFIG_PCNET32=y +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_TOSHIBA is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_WLAN is not set +# CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_HW_RANDOM=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_G=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_QUOTA=y +CONFIG_QFMT_V2=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/mips/configs/maltasmtc_defconfig b/arch/mips/configs/maltasmtc_defconfig new file mode 100644 index 00000000000..4e54b75d89b --- /dev/null +++ b/arch/mips/configs/maltasmtc_defconfig @@ -0,0 +1,196 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMTC=y +# CONFIG_MIPS_MT_FPAFF is not set +CONFIG_NR_CPUS=9 +CONFIG_HZ_48=y +CONFIG_LOCALVERSION="smtc" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +# CONFIG_INET_LRO is not set +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONF |