aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/common
AgeCommit message (Collapse)Author
2017-11-27media: siano: get rid of documentation warningsMauro Carvalho Chehab
The Siano driver doesn't use kernel-doc markups. While it would be wanderful to convert to use it, it is probably not worth the time. So, instead of solving all problems there, just make sure that it won't produce dozens of warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-21treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-15Merge tag 'media/v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31media: saa7146: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: media/saa7146: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This requires adding a pointer to hold the timer's target file, as there won't be a way to pass this in the future. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-04[media] v4l2-tpg: add Y10 and Y12 supportHans Verkuil
Support the 10 and 12 bit luma formats. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04[media] saa7146: make saa7146_use_ops constBhumika Goyal
Make these const as they are not modified in the file referencing them. They are only used when their function pointer fields invokes a function and therefore none of the structure fields are getting modified. Also, add a const to the declaration in the header. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-09-23media: drivers: Adjust checks for null pointersMarkus Elfring
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23media: drivers: improve a size determinationMarkus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensoure.com: merge similar patches into one] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
2017-09-23media: drivers: delete error messages for failed memory allocationMarkus Elfring
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: fold several similar patches into one] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: saa7146: constify videobuf_queue_ops structuresArvind Yadav
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*Sean Young
RC_TYPE is confusing and it's just the protocol. So rename it. Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc-core: rename input_name to device_nameSean Young
When an ir-spi is registered, you get this message. rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 "Unspecified device" refers to input_name, which makes no sense for IR TX only devices. So, rename to device_name. Also make driver_name const char* so that no casts are needed anywhere. Now ir-spi reports: rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08media: v4l2-tpg: fix the SMPTE-2084 transfer functionHans Verkuil
The SMPTE-2084 transfer functions maps to the luminance range of 0-10000 cd/m^2. Other transfer functions use the traditional range of 0-100 cd/m^2. I didn't take this into account so the luminance was off by a factor of 100. Since qv4l2 made the same mistake in reverse I never noticed this until I tested with actual SMPTE-2084 video. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08media: v4l2-tpg-core.c: fix typo in bt2020_full matrixHans Verkuil
My eye fell on this wrong coefficient in the bt2020_full matrix. The bt2020 matrix (limited range) is OK. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-20media: saa7146: constify i2c_algorithm structureGustavo A. R. Silva
Check for i2c_algorithm structures that are only stored in the algo field of an i2c_adapter structure. This field is declared const, so i2c_algorithm structures that have this property can be declared as const also. This issue was identified using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct i2c_algorithm i@p = { ... }; @ok@ identifier r.i; struct i2c_adapter e; position p; @@ e.algo = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct i2c_algorithm i = { ... }; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-17[media] b2c2: constify nxt200x_config structureBhumika Goyal
Declare nxt200x_config structure as const as it is only passed as an argument to the function dvb_attach. dvb_attach calls its first argument on the rest of its arguments. The first argument of dvb_attach in the changed case is nxt200x_attach and the parameter of this function to which the object reference is passed is of type const. So, nxt200x_config structures having this property can be made const. File size before: text data bss dec hex filename 7566 568 0 8134 1fc6 common/b2c2/flexcop-fe-tuner.o File size after: text data bss dec hex filename 7582 536 0 8118 1fb6 common/b2c2/flexcop-fe-tuner.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] v4l2-tpg: don't clamp XV601/709 to lim rangeHans Verkuil
The XV601/709 encodings are special: they signal limited range, but use the full range to encode a larger gamut with R', G' and B' values outside the [0-1] range. So don't clamp to limited range for these two encodings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] saa7146: use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-03[media] tveeprom: get rid of unused arg on tveeprom_hauppauge_analog()Mauro Carvalho Chehab
tveeprom_hauppauge_analog() used to need the I2C adapter in order to print debug messages. As it now uses pr_foo() facilities since commit 6037b3ca28f4 ("[media] tveeprom: print log messages using pr_foo()"), the first argument of the function is not needed anymore. So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03[media] b2c2: use IS_REACHABLE() instead of open-coding itArnd Bergmann
The FE_SUPPORTED() macro is basically the same as IS_REACHABLE, except that it causes a warning with gcc-7: common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined] common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined] common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined] Using IS_REACHABLE() to define it avoids the warning. Fixes: 3785bc170f79 ("[media] b2c2: break it into common/pci/usb directories") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] rc-main: assign driver type during allocationAndi Shyti
The driver type can be assigned immediately when an RC device requests to the framework to allocate the device. This is an 'enum rc_driver_type' data type and specifies whether the device is a raw receiver or scancode receiver. The type will be given as parameter to the rc_allocate_device device. Change accordingly all the drivers calling rc_allocate_device() so that the device type is specified during the rc device allocation. Whenever the device type is not specified, it will be set as RC_DRIVER_SCANCODE which was the default '0' value. Suggested-by: Sean Young <sean@mess.org> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] rc: raw IR drivers cannot handle cec, unknown or otherSean Young
unknown and other are for IR protocols for which we have no decoder, so the raw IR drivers have no chance of generating them. cec is not an IR protocol. Signed-off-by: Sean Young <sean@mess.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-27[media] media: Drop FSF's postal address from the source code filesSakari Ailus
Drop the FSF's postal address from the source code files that typically contain mostly the license text. Of the 628 removed instances, 578 are outdated. The patch has been created with the following command without manual edits: git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \ drivers/media/ include/media|while read i; do i=$i perl -e ' open(F,"< $ENV{i}"); $a=join("", <F>); $a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m && $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m; close(F); open(F, "> $ENV{i}"); print F $a; close(F);'; done Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-11-29[media] v4l2-tpg: Init hv_enc field with a valid valueRicardo Ribalda
Zero is not a valid value for hsv_enc. Set the field to a valid initial value. This is not a problem for vivid, because it sets the field to 180 via tpg_s_hsv_enc() on the control initialization, but it might be a source of errors for other drivers that use this code. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23[media] saa7146: Fix for while releasing video buffersAndrey Utkin
Fix this bug: "[BUG] process stuck when closing saa7146 [dvb_ttpci]" Release queued DMA buffers when ending streaming, so that videobuf_waiton() doesn't block forever. As reported, this fixes avoids occasional lockup of process reading from video device, which manifests in such log: INFO: task ffmpeg:9864 blocked for more than 120 seconds. Tainted: P O 4.6.7 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ffmpeg D ffff880177cc7b00 0 9864 1 0x00000000 ffff880177cc7b00 0000000000000202 0000000000000202 ffffffff8180b4c0 ffff88019d79e4c0 ffffffff81064050 ffff880177cc7ae0 ffff880177cc8000 ffff880177cc7b18 ffff8801fd41d648 ffff8802307acca0 ffff8802307acc70 Call Trace: [<ffffffff81064050>] ? preempt_count_add+0x89/0xab [<ffffffff81477215>] schedule+0x86/0x9e [<ffffffff81477215>] ? schedule+0x86/0x9e [<ffffffffa0fe1c96>] videobuf_waiton+0x131/0x15e [videobuf_core] [<ffffffff8107727b>] ? wait_woken+0x6d/0x6d [<ffffffffa1017be9>] saa7146_dma_free+0x39/0x5b [saa7146_vv] [<ffffffffa10186c4>] buffer_release+0x2a/0x3e [saa7146_vv] [<ffffffffa0fee4a8>] videobuf_vm_close+0xd8/0x103 [videobuf_dma_sg] [<ffffffff8112049e>] remove_vma+0x25/0x4d [<ffffffff81121a32>] exit_mmap+0xce/0xf7 [<ffffffff8104381d>] mmput+0x4e/0xe2 [<ffffffff810491fd>] do_exit+0x372/0x920 [<ffffffff81049813>] do_group_exit+0x3c/0x98 [<ffffffff810522ef>] get_signal+0x4e8/0x56e [<ffffffff810710a5>] ? task_dead_fair+0xd/0xf [<ffffffff81017020>] do_signal+0x23/0x521 [<ffffffff81479e82>] ? _raw_spin_unlock_irqrestore+0x13/0x25 [<ffffffff8109710d>] ? hrtimer_try_to_cancel+0xd7/0x104 [<ffffffff8109b306>] ? ktime_get+0x4c/0xa1 [<ffffffff81096ea6>] ? update_rmtp+0x46/0x5b [<ffffffff81097ce0>] ? hrtimer_nanosleep+0xe4/0x10e [<ffffffff81096e3c>] ? hrtimer_init+0xeb/0xeb [<ffffffff810014f8>] exit_to_usermode_loop+0x4f/0x93 [<ffffffff810019fe>] syscall_return_slowpath+0x3b/0x46 [<ffffffff8147a355>] entry_SYSCALL_64_fastpath+0x8d/0x8f Reported-by: Philipp Matthias Hahn <pmhahn+video@pmhahn.de> Tested-by: Philipp Matthias Hahn <pmhahn+video@pmhahn.de> Signed-off-by: Andrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18[media] dvb: make DVB frontend *_ops instances "const"Max Kellermann
These are immutable. Making them "const" allows the compiler to move them to the "rodata" section. Note that cxd2841er_t_c_ops cannot be made "const", because cxd2841er_attach() modifies it. Ouch! [mchehab@s-opensource.com: fix merge conflicts] Signed-off-by: Max Kellermann <max.kellermann@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18[media] tveeprom: print log messages using pr_foo()Mauro Carvalho Chehab
Unfortunately, the callers of tveeprom don't do the right thing to initialize the device. So, it produces log messages like: [ 267.533010] (null): Hauppauge model 42012, rev C186, serial# 2819348 [ 267.533012] (null): tuner model is Philips FQ1236 MK3 (idx 86, type 43) [ 267.533013] (null): TV standards NTSC(M) (eeprom 0x08) [ 267.533014] (null): audio processor is MSP3445 (idx 12) [ 267.533015] (null): has radio So, replace it to pr_foo(), as it should work fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Add support for HSV encodingRicardo Ribalda Delgado
Support HSV encoding. Most of the logic is replicated from ycbcr_enc. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Local optimizationRicardo Ribalda Delgado
Avoid duplicated clamps when possible. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Fix YUV555 and YUV565 handlingRicardo Ribalda Delgado
precalculate_color() had a optimization that avoided duplicated conversion for YUV formats. This optimization did not take into consideration YUV444, YUV555, YUV565 or limited range quantization. This patch keeps the optimization, but fixes the wrong handling. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Introduce TPG_COLOR_ENC_LUMARicardo Ribalda Delgado
Simplifies handling of Gray formats. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Rename variableRicardo Ribalda Delgado
r_y and g_u now also contain the H and V components on the HSV formats. Rename the variables to reflect this. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Add support for HSV formatsRicardo Ribalda Delgado
This patch adds support for V4L2_PIX_FMT_HSV24 and V4L2_PIX_FMT_HSV32. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] vivid: Code refactor for color encodingRicardo Ribalda Delgado
Replace is_yuv with color_enc Which can be used by other color encodings such us HSV. This change should ease the review of the following patches. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] tveeprom: use dev_foo() for printk messagesMauro Carvalho Chehab
Instead of calling a V4L-specific macro, do the right thing and use the dev_foo() macros. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] common: don't break long linesMauro Carvalho Chehab
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] b2c2: don't break long linesMauro Carvalho Chehab
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] cx2341x: mark printk continuation lines as suchMauro Carvalho Chehab
This driver has printk continuation lines for debugging purposes. Since commit 563873318d32 ("Merge branch 'printk-cleanups'"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] flexcop-i2c: mark printk continuation lines as suchMauro Carvalho Chehab
This driver has printk continuation lines for debugging purposes. Since commit 563873318d32 ("Merge branch 'printk-cleanups'"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21[media] dvb-core: move dvb_filter out of the DVB coreMauro Carvalho Chehab
The dvb_filter.c can hardly be considered as part of the DVB core. More than half of the code there is commented out by av7110 and ttusb_dec. On the latter, just two small helper functions and a struct definition is used. Being part of the core means that it would require an amount of work to fix issues in it, like bad printk's on it, and to document it on some future, like other kAPI headers. It simply not worth the effort for something that seems to be deprecated, as no new drivers use it. So, move it out of the core, by moving it to pci/ttpci directory, where av7110 driver is kept, and copy the two routines used by ttyusb_dec directly into its code. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] v4l2-tpg-core: drop SYCC, use higher precision 601 conversion matrixHans Verkuil
The SYCC Y'CbCr encoding is identical to the 601 encoding. Since the SYCC define is about to be removed for use in the kernel we need to drop it in the TPG code as well. This patch also adds a 4th decimal to the 601 conversion matrix. That was specified by the sYCC spec and it makes sense to use this across the board. [mchehab@s-opensource.com: fix conflicts with LaTeX math expression patch] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08[media] v4l2-tpg: ignore V4L2_DV_RGB_RANGE setting for YUV formatsHans Verkuil
The V4L2_DV_RGB_RANGE_* settings are, as the name says, for RGB formats only. So they should be ignored for non-RGB formats. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-04-20[media] tpg: Export the tpg code from vivid as a moduleHelen Mae Koike Fornazier
The test pattern generator will be used by other drivers as the virtual media controller (vimc) Signed-off-by: Helen Mae Koike Fornazier <helen.koike@collabora.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] siano: firmware buffer is too smallMauro Carvalho Chehab
As pointed by KASAN: BUG: KASAN: slab-out-of-bounds in memcpy+0x1d/0x40 at addr ffff880000038d8c Read of size 128 by task systemd-udevd/2536 page:ffffea0000000800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0xffff8000004000(head) page dumped because: kasan: bad access detected CPU: 1 PID: 2536 Comm: systemd-udevd Not tainted 4.5.0-rc3+ #47 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 ffff880000038d8c ffff8803b0f1f1e8 ffffffff81933901 0000000000000080 ffff8803b0f1f280 ffff8803b0f1f270 ffffffff815602c5 ffffffff8284cf93 ffffffff822ddc00 0000000000000282 0000000000000001 ffff88009c7c6000 Call Trace: [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff815602c5>] kasan_report_error+0x525/0x550 [<ffffffff815606e9>] kasan_report+0x39/0x40 [<ffffffff8155f84d>] memcpy+0x1d/0x40 [<ffffffffa120cb90>] smscore_set_device_mode+0xee0/0x2560 [smsmdtv] Such error happens at the memcpy code below: 0x4bc0 is in smscore_set_device_mode (drivers/media/common/siano/smscoreapi.c:975). 970 sizeof(u32) + payload_size)); 971 972 data_msg->mem_addr = mem_address; 973 memcpy(data_msg->payload, payload, payload_size); 974 975 rc = smscore_sendrequest_and_wait(coredev, data_msg, 976 data_msg->x_msg_header.msg_length, 977 &coredev->data_download_done); 978 979 payload += payload_size; The problem is that the Siano driver uses a header to store the firmware, with requires a few more bytes than allocated. Tested with: PCTV 77e (2013:0257) Hauppauge WinTV MiniStick (2040:5510) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-04[media] siano: remove get_frontend stubMauro Carvalho Chehab
There's nothing at siano's get_frontend() callback. So, remove it, as the core will handle it. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] b2c2: flexcop: avoid unused function warningsArnd Bergmann
The flexcop driver has two functions that are normally used, except when multiple frontend drivers are disabled: drivers/media/common/b2c2/flexcop-fe-tuner.c:42:12: warning: 'flexcop_set_voltage' defined but not used [-Wunused-function] drivers/media/common/b2c2/flexcop-fe-tuner.c:71:12: warning: 'flexcop_sleep' defined but not used [-Wunused-function] This avoids the build warning by updating the #ifdef for flexcop_set_voltage to the exact condition under which it is used. For flexcop_sleep, the condition is rather complex, so I resort to marking it as __maybe_unused, so the compiler can silently drop it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] media: change email addressPatrick Boettcher
Soon my dibcom.fr/parrot.com-address won't respond anymore. Thus I'm replacing it. And, while being at it, let's adapt some other (old) email-addresses as well. Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description