aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-08-20arm64: configs: Enable Actions Semi platform in defconfigb96-mmcManivannan Sadhasivam
Since the Actions Semi platform can now boot a distro, enable it in ARM64 defconfig. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-20arm64: dts: actions: Add uSD and eMMC support for Bubblegum96Manivannan Sadhasivam
Add uSD and eMMC support for Bubblegum96 board based on Actions Semi Owl SoC. SD0 is connected to uSD slot and SD2 is connected to eMMC. Since there is no PMIC support added yet, fixed regulator has been used as a regulator node. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-20arm64: dts: actions: Add MMC controller support for S900Manivannan Sadhasivam
Add MMC controller support for Actions Semi S900 SoC. There are 4 MMC controllers in this SoC which can be used for accessing SD/MMC/SDIO cards. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-20arm64: ftrace: Ensure module ftrace trampoline is coherent with I-sideWill Deacon
The initial support for dynamic ftrace trampolines in modules made use of an indirect branch which loaded its target from the beginning of a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far branches to dynamic ftrace")). Since no instructions were being patched, no cache maintenance was needed. However, later in be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") this code was reworked to output the trampoline instructions directly into the PLT entry but, unfortunately, the necessary cache maintenance was overlooked. Add a call to __flush_icache_range() after writing the new trampoline instructions but before patching in the branch to the trampoline. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Fixes: be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-08-20arm64: cpufeature: Don't treat granule sizes as strictWill Deacon
If a CPU doesn't support the page size for which the kernel is configured, then we will complain and refuse to bring it online. For secondary CPUs (and the boot CPU on a system booting with EFI), we will also print an error identifying the mismatch. Consequently, the only time that the cpufeature code can detect a granule size mismatch is for a granule other than the one that is currently being used. Although we would rather such systems didn't exist, we've unfortunately lost that battle and Kevin reports that on his amlogic S922X (odroid-n2 board) we end up warning and taining with defconfig because 16k pages are not supported by all of the CPUs. In such a situation, we don't actually care about the feature mismatch, particularly now that KVM only exposes the sanitised view of the CPU registers (commit 93390c0a1b20 - "arm64: KVM: Hide unsupported AArch64 CPU features from guests"). Treat the granule fields as non-strict and let Kevin run without a tainted kernel. Cc: Marc Zyngier <maz@kernel.org> Reported-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will@kernel.org> [catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-08-14Merge tag 'Wimplicit-fallthrough-5.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix sh mainline builds: - Fix fall-through warning in sh. - Fix missing break bug in sh (this is a 10-year-old bug) Currently, mainline builds for sh are broken. These patches fix that" * tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: sh: kernel: hw_breakpoint: Fix missing break in switch statement sh: kernel: disassemble: Mark expected switch fall-throughs
2019-08-14Merge tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - fix the handling of the bus_dma_mask in dma_get_required_mask, which caused a regression in this merge window (Lucas Stach) - fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me) - fix dma_mmap_coherent to not cause page attribute mismatches on coherent architectures like x86 (me) * tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix page attributes for dma_mmap_* dma-direct: don't truncate dma_required_mask to bus addressing capabilities dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
2019-08-11sh: kernel: hw_breakpoint: Fix missing break in switch statementGustavo A. R. Silva
Add missing break statement in order to prevent the code from falling through to case SH_BREAKPOINT_WRITE. Fixes: 09a072947791 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.") Cc: stable@vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-11sh: kernel: disassemble: Mark expected switch fall-throughsGustavo A. R. Silva
Remove logically dead code and mark switch cases where we are expecting to fall through. Fix the following warnings (Building: defconfig sh): arch/sh/kernel/disassemble.c:478:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/sh/kernel/disassemble.c:487:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/sh/kernel/disassemble.c:496:8: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-10Merge tag 'riscv/for-v5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: "A few minor RISC-V updates for v5.3-rc4: - Remove __udivdi3() from the 32-bit Linux port, converting the only upstream user to use do_div(), per Linux policy - Convert the RISC-V standard clocksource away from per-cpu data structures, since only one is used by Linux, even on a multi-CPU system - A set of DT binding updates that remove an obsolete text binding in favor of a YAML binding, fix a bogus compatible string in the schema (thus fixing a "make dtbs_check" warning), and clarifies the future values expected in one of the RISC-V CPU properties" * tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board dt-bindings: riscv: remove obsolete cpus.txt RISC-V: Remove udivdi3 riscv: delay: use do_div() instead of __udivdi3() dt-bindings: Update the riscv,isa string description RISC-V: Remove per cpu clocksource
2019-08-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A few fixes for x86: - Don't reset the carefully adjusted build flags for the purgatory and remove the unwanted flags instead. The 'reset all' approach led to build fails under certain circumstances. - Unbreak CLANG build of the purgatory by avoiding the builtin memcpy/memset implementations. - Address missing prototype warnings by including the proper header - Fix yet more fall-through issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/lib/cpu: Address missing prototypes warning x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS x86/purgatory: Do not use __builtin_memcpy and __builtin_memset x86: mtrr: cyrix: Mark expected switch fall-through x86/ptrace: Mark expected switch fall-through
2019-08-10Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough ↵Joe Perches
for clang A compilation -Wimplicit-fallthrough warning was enabled by commit a035d552a93b ("Makefile: Globally enable fall-through warning") Even though clang 10.0.0 does not currently support this warning without a patch, clang currently does not support a value for this option. Link: https://bugs.llvm.org/show_bug.cgi?id=39382 The gcc default for this warning is 3 so removing the =3 has no effect for gcc and enables the warning for patched versions of clang. Also remove the =3 from an existing use in a parisc Makefile: arch/parisc/math-emu/Makefile Signed-off-by: Joe Perches <joe@perches.com> Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-10dma-mapping: fix page attributes for dma_mmap_*Christoph Hellwig
All the way back to introducing dma_common_mmap we've defaulted to mark the pages as uncached. But this is wrong for DMA coherent devices. Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that flag is only treated special on the alloc side for non-coherent devices. Introduce a new dma_pgprot helper that deals with the check for coherent devices so that only the remapping cases ever reach arch_dma_mmap_pgprot and we thus ensure no aliasing of page attributes happens, which makes the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the remaining ones. Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but we'll phase it out soon. Fixes: 64ccc9c033c6 ("common: dma-mapping: add support for generic dma_mmap_* calls") Reported-by: Shawn Anastasio <shawn@anastas.io> Reported-by: Gavin Li <git@thegavinli.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-08-10Merge tag 'powerpc-5.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "Just one fix, a revert of a commit that was meant to be a minor improvement to some inline asm, but ended up having no real benefit with GCC and broke booting 32-bit machines when using Clang. Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick Desaulniers, Segher Boessenkool" * tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: slightly improve cache helpers"
2019-08-10Merge tag 'Wimplicit-fallthrough-5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall-through fixes from Gustavo A. R. Silva: "Mark more switch cases where we are expecting to fall through, fixing fall-through warnings in arm, sparc64, mips, i386 and s390" * tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: ARM: ep93xx: Mark expected switch fall-through scsi: fas216: Mark expected switch fall-throughs pcmcia: db1xxx_ss: Mark expected switch fall-throughs video: fbdev: omapfb_main: Mark expected switch fall-throughs watchdog: riowd: Mark expected switch fall-through s390/net: Mark expected switch fall-throughs crypto: ux500/crypt: Mark expected switch fall-throughs watchdog: wdt977: Mark expected switch fall-through watchdog: scx200_wdt: Mark expected switch fall-through watchdog: Mark expected switch fall-throughs ARM: signal: Mark expected switch fall-through mfd: omap-usb-host: Mark expected switch fall-throughs mfd: db8500-prcmu: Mark expected switch fall-throughs ARM: OMAP: dma: Mark expected switch fall-throughs ARM: alignment: Mark expected switch fall-throughs ARM: tegra: Mark expected switch fall-through ARM/hw_breakpoint: Mark expected switch fall-throughs
2019-08-09ARM: ep93xx: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: arm-ep93xx_defconfig arm): arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do': arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may fall through [-Wimplicit-fallthrough=] memset(crunch_state, 0, sizeof(*crunch_state)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ep93xx/crunch.c:53:2: note: here case THREAD_NOTIFY_EXIT: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: signal: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/kernel/signal.c: In function 'do_signal': arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=] restart -= 2; ~~~~~~~~^~~~ arch/arm/kernel/signal.c:599:3: note: here case -ERESTARTNOHAND: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: OMAP: dma: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: alignment: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/mm/alignment.c: In function 'thumb2arm': arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((tinstr & (3 << 9)) == 0x0400) { ^ arch/arm/mm/alignment.c:700:2: note: here default: ^~~~~~~ arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler': arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=] poffset->un = (tinst2 & 0xff) << 2; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mm/alignment.c:754:2: note: here case 0xe940: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: tegra: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable': arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=] tegra_cpu_reset_handler_set(reset_address); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-tegra/reset.c:74:2: note: here case 0: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM/hw_breakpoint: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse': arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) ^ arch/arm/kernel/hw_breakpoint.c:611:2: note: here case 3: ^~~~ arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) ^ arch/arm/kernel/hw_breakpoint.c:615:2: note: here default: ^~~~~~~ arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info': arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE) ^ arch/arm/kernel/hw_breakpoint.c:547:2: note: here default: ^~~~~~~ In file included from include/linux/kernel.h:11, from include/linux/list.h:9, from include/linux/preempt.h:11, from include/linux/hardirq.h:5, from arch/arm/kernel/hw_breakpoint.c:16: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending': include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely' unlikely(__ret_warn_on); \ ^~~~~~~~ arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN' WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); ^~~~ arch/arm/kernel/hw_breakpoint.c:864:2: note: here case ARM_ENTRY_SYNC_WATCHPOINT: ^~~~ arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore': arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (oslsr & ARM_OSLSR_OSLM0) ^ arch/arm/kernel/hw_breakpoint.c:912:2: note: here default: ^~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes (arm and x86) and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests: kvm: Adding config fragments KVM: selftests: Update gitignore file for latest changes kvm: remove unnecessary PageReserved check KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable KVM: arm: Don't write junk to CP15 registers on reset KVM: arm64: Don't write junk to sysregs on reset KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block x86: kvm: remove useless calls to kvm_para_available KVM: no need to check return value of debugfs_create functions KVM: remove kvm_arch_has_vcpu_debugfs() KVM: Fix leak vCPU's VMCS value into other pCPU KVM: Check preempted_in_kernel for involuntary preemption KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire arm64: KVM: hyp: debug-sr: Mark expected switch fall-through KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC KVM: arm: vgic-v3: Mark expected switch fall-through arm64: KVM: regmap: Fix unexpected switch fall-through KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
2019-08-09Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix bad_pte warning caused by pte_mkdevmap() not setting PTE_SPECIAL" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64
2019-08-09Merge tag 's390-5.3-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Map vdso also for statically linked binaries like all other architectures. - Fix no .bss usage compile-time check to account common objects with the help of binutils size tool. Top level Makefile change acked-by Masahiro. - A fix to make perf happy with _etext symbol type. - Fix dump_pagetables which is broken since p*d_offset implementation change to comply with mm/gup.c expectations. - Revert memory sharing for diag calls in protected virtualization, since this is not required after all. - Couple of other minor code cleanups. * tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vdso: map vdso also for statically linked binaries s390/build: use size command to perform empty .bss check kbuild: add OBJSIZE variable for the size tool s390: put _stext and _etext into .text section s390/head64: cleanup unused labels s390/unwind: remove stack recursion warning s390/setup: adjust start_code of init_mm to _text s390/mm: fix dump_pagetables top level page table walking s390/protvirt: avoid memory sharing for diag 308 set/store
2019-08-09Merge tag 'kvmarm-fixes-for-5.3-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3, take #2 - Fix our system register reset so that we stop writing non-sensical values to them, and track which registers get reset instead. - Sync VMCR back from the GIC on WFI so that KVM has an exact vue of PMR. - Reevaluate state of HW-mapped, level triggered interrupts on enable.
2019-08-09Merge tag 'kvmarm-fixes-for-5.3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings
2019-08-09s390/vdso: map vdso also for statically linked binariesHeiko Carstens
s390 does not map the vdso for statically linked binaries, assuming that this doesn't make sense. See commit fc5243d98ac2 ("[S390] arch_setup_additional_pages arguments"). However with glibc commit d665367f596d ("linux: Enable vDSO for static linking as default (BZ#19767)") and commit 5e855c895401 ("s390: Enable VDSO for static linking") the vdso is also used for statically linked binaries - if the kernel would make it available. Therefore map the vdso always, just like all other architectures. Reported-by: Stefan Liebler <stli@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-09KVM: arm: Don't write junk to CP15 registers on resetMarc Zyngier
At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-09KVM: arm64: Don't write junk to sysregs on resetMarc Zyngier
At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-08RISC-V: Remove udivdi3Palmer Dabbelt
This should never have landed in the first place: it was added as part of 64-bit divide support for 32-bit systems, but the kernel doesn't allow this sort of division. I must have forgotten to remove it. This patch removes the support. Since this routine only worked on 64-bit platforms but was only built on 32-bit platforms, it's essentially just nonsense anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Link: https://lore.kernel.org/linux-riscv/nycvar.YSQ.7.76.1908061413360.19480@knanqh.ubzr/T/#t Reported-by: Eric Lin <tesheng@andestech.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-08riscv: delay: use do_div() instead of __udivdi3()Paul Walmsley
In preparation for removing __udivdi3() from the RISC-V architecture-specific files, convert its one user to use do_div(). This avoids breaking the RV32 build after __udivdi3() is removed. This second version removes the assignment of the remainder to an unused temporary variable. Thanks to Nicolas Pitre <nico@fluxnic.net> for the suggestion. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Nicolas Pitre <nico@fluxnic.net>
2019-08-08arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64Jia He
Without this patch, the MAP_SYNC test case will cause a print_bad_pte warning on arm64 as follows: [ 25.542693] BUG: Bad page map in process mapdax333 pte:2e8000448800f53 pmd:41ff5f003 [ 25.546360] page:ffff7e0010220000 refcount:1 mapcount:-1 mapping:ffff8003e29c7440 index:0x0 [ 25.550281] ext4_dax_aops [ 25.550282] name:"__aaabbbcccddd__" [ 25.551553] flags: 0x3ffff0000001002(referenced|reserved) [ 25.555802] raw: 03ffff0000001002 ffff8003dfffa908 0000000000000000 ffff8003e29c7440 [ 25.559446] raw: 0000000000000000 0000000000000000 00000001fffffffe 0000000000000000 [ 25.563075] page dumped because: bad pte [ 25.564938] addr:0000ffffbe05b000 vm_flags:208000fb anon_vma:0000000000000000 mapping:ffff8003e29c7440 index:0 [ 25.574272] file:__aaabbbcccddd__ fault:ext4_dax_fault mmmmap:ext4_file_mmap readpage:0x0 [ 25.578799] CPU: 1 PID: 1180 Comm: mapdax333 Not tainted 5.2.0+ #21 [ 25.581702] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 25.585624] Call trace: [ 25.587008] dump_backtrace+0x0/0x178 [ 25.588799] show_stack+0x24/0x30 [ 25.590328] dump_stack+0xa8/0xcc [ 25.591901] print_bad_pte+0x18c/0x218 [ 25.593628] unmap_page_range+0x778/0xc00 [ 25.595506] unmap_single_vma+0x94/0xe8 [ 25.597304] unmap_vmas+0x90/0x108 [ 25.598901] unmap_region+0xc0/0x128 [ 25.600566] __do_munmap+0x284/0x3f0 [ 25.602245] __vm_munmap+0x78/0xe0 [ 25.603820] __arm64_sys_munmap+0x34/0x48 [ 25.605709] el0_svc_common.constprop.0+0x78/0x168 [ 25.607956] el0_svc_handler+0x34/0x90 [ 25.609698] el0_svc+0x8/0xc [...] The root cause is in _vm_normal_page, without the PTE_SPECIAL bit, the return value will be incorrectly set to pfn_to_page(pfn) instead of NULL. Besides, this patch also rewrite the pmd_mkdevmap to avoid setting PTE_SPECIAL for pmd The MAP_SYNC test case is as follows(Provided by Yibo Cai) $#include <stdio.h> $#include <string.h> $#include <unistd.h> $#include <sys/file.h> $#include <sys/mman.h> $#ifndef MAP_SYNC $#define MAP_SYNC 0x80000 $#endif /* mount -o dax /dev/pmem0 /mnt */ $#define F "/mnt/__aaabbbcccddd__" int main(void) { int fd; char buf[4096]; void *addr; if ((fd = open(F, O_CREAT|O_TRUNC|O_RDWR, 0644)) < 0) { perror("open1"); return 1; } if (write(fd, buf, 4096) != 4096) { perror("lseek"); return 1; } addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_SYNC, fd, 0); if (addr == MAP_FAILED) { perror("mmap"); printf("did you mount with '-o dax'?\n"); return 1; } memset(addr, 0x55, 4096); if (munmap(addr, 4096) == -1) { perror("munmap"); return 1; } close(fd); return 0; } Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support") Reported-by: Yibo Cai <Yibo.Cai@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Robin Murphy <Robin.Murphy@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-08-08s390/build: use size command to perform empty .bss checkVasily Gorbik
Currently empty .bss checks performed do not pay attention to "common objects" in object files which end up in .bss section eventually. The "size" tool is a part of binutils and since version 2.18 provides "--common" command line option, which allows to account "common objects" sizes in .bss section size. Utilize "size --common" to perform accurate check that .bss section is unused. Besides that the size tool handles object files without .bss section gracefully and doesn't require additional objdump run. The linux kernel requires binutils 2.20 since 4.13. Kbuild exports OBJSIZE to reference the right size tool. Link: http://lkml.kernel.org/r/patch-2.thread-2257a1.git-2257a1c53d4a.your-ad-here.call-01565088755-ext-5120@work.hours Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-08x86/lib/cpu: Address missing prototypes warningValdis Klētnieks
When building with W=1, warnings about missing prototypes are emitted: CC arch/x86/lib/cpu.o arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes] 5 | unsigned int x86_family(unsigned int sig) | ^~~~~~~~~~ arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes] 18 | unsigned int x86_model(unsigned int sig) | ^~~~~~~~~ arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes] 33 | unsigned int x86_stepping(unsigned int sig) | ^~~~~~~~~~~~ Add the proper include file so the prototypes are there. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/42513.1565234837@turing-police
2019-08-08x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGSNick Desaulniers
KBUILD_CFLAGS is very carefully built up in the top level Makefile, particularly when cross compiling or using different build tools. Resetting KBUILD_CFLAGS via := assignment is an antipattern. The comment above the reset mentions that -pg is problematic. Other Makefiles use `CFLAGS_REMOVE_file.o = $(CC_FLAGS_FTRACE)` when CONFIG_FUNCTION_TRACER is set. Prefer that pattern to wiping out all of the important KBUILD_CFLAGS then manually having to re-add them. Seems also that __stack_chk_fail references are generated when using CONFIG_STACKPROTECTOR or CONFIG_STACKPROTECTOR_STRONG. Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality") Reported-by: Vaibhav Rustagi <vaibhavrustagi@google.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190807221539.94583-2-ndesaulniers@google.com
2019-08-08x86/purgatory: Do not use __builtin_memcpy and __builtin_memsetNick Desaulniers
Implementing memcpy and memset in terms of __builtin_memcpy and __builtin_memset is problematic. GCC at -O2 will replace calls to the builtins with calls to memcpy and memset (but will generate an inline implementation at -Os). Clang will replace the builtins with these calls regardless of optimization level. $ llvm-objdump -dr arch/x86/purgatory/string.o | tail 0000000000000339 memcpy: 339: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 000000000000033b: R_X86_64_64 memcpy 343: ff e0 jmpq *%rax 0000000000000345 memset: 345: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 0000000000000347: R_X86_64_64 memset 34f: ff e0 Such code results in infinite recursion at runtime. This is observed when doing kexec. Instead, reuse an implementation from arch/x86/boot/compressed/string.c. This requires to implement a stub function for warn(). Also, Clang may lower memcmp's that compare against 0 to bcmp's, so add a small definition, too. See also: commit 5f074f3e192f ("lib/string.c: implement a basic bcmp") Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality") Reported-by: Vaibhav Rustagi <vaibhavrustagi@google.com> Debugged-by: Vaibhav Rustagi <vaibhavrustagi@google.com> Debugged-by: Manoj Gupta <manojgupta@google.com> Suggested-by: Alistair Delva <adelva@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com> Cc: stable@vger.kernel.org Link: https://bugs.chromium.org/p/chromium/issues/detail?id=984056 Link: https://lkml.kernel.org/r/20190807221539.94583-1-ndesaulniers@google.com
2019-08-07x86: mtrr: cyrix: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: i386_defconfig i386): arch/x86/kernel/cpu/mtrr/cyrix.c:99:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20190805201712.GA19927@embeddedor
2019-08-07x86/ptrace: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: allnoconfig i386): arch/x86/kernel/ptrace.c:202:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (unlikely(value == 0)) ^ arch/x86/kernel/ptrace.c:206:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20190805195654.GA17831@embeddedor
2019-08-06Merge tag 'mips_fixes_5.3_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few MIPS fixes for 5.3: - Various switch fall through annotations to fixup warnings & errors resulting from -Wimplicit-fallthrough. - A fix for systems (at least jazz) using an i8253 PIT as clocksource when it's not suitably configured. - Set struct cacheinfo's cpu_map_populated field to true, indicating that we filled in cache info detected from cop0 registers & avoiding complaints about that info being (intentionally) missing in devicetree" * tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: BCM63XX: Mark expected switch fall-through MIPS: OProfile: Mark expected switch fall-throughs MIPS: Annotate fall-through in Cavium Octeon code MIPS: Annotate fall-through in kvm/emulate.c mips: fix cacheinfo MIPS: kernel: only use i8253 clocksource with periodic clockevent
2019-08-06Merge branch 'x86/grand-schemozzle' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull pti updates from Thomas Gleixner: "The performance deterioration departement is not proud at all to present yet another set of speculation fences to mitigate the next chapter in the 'what could possibly go wrong' story. The new vulnerability belongs to the Spectre class and affects GS based data accesses and has therefore been dubbed 'Grand Schemozzle' for secret communication purposes. It's officially listed as CVE-2019-1125. Conditional branches in the entry paths which contain a SWAPGS instruction (interrupts and exceptions) can be mis-speculated which results in speculative accesses with a wrong GS base. This can happen on entry from user mode through a mis-speculated branch which takes the entry from kernel mode path and therefore does not execute the SWAPGS instruction. The following speculative accesses are done with user GS base. On entry from kernel mode the mis-speculated branch executes the SWAPGS instruction in the entry from user mode path which has the same effect that the following GS based accesses are done with user GS base. If there is a disclosure gadget available in these code paths the mis-speculated data access can be leaked through the usual side channels. The entry from user mode issue affects all CPUs which have speculative execution. The entry from kernel mode issue affects only Intel CPUs which can speculate through SWAPGS. On CPUs from other vendors SWAPGS has semantics which prevent that. SMAP migitates both problems but only when the CPU is not affected by the Meltdown vulnerability. The mitigation is to issue LFENCE instructions in the entry from kernel mode path for all affected CPUs and on the affected Intel CPUs also in the entry from user mode path unless PTI is enabled because the CR3 write is serializing. The fences are as usual enabled conditionally and can be completely disabled on the kernel command line. The Spectre V1 documentation is updated accordingly. A big "Thank You!" goes to Josh for doing the heavy lifting for this round of hardware misfeature 'repair'. Of course also "Thank You!" to everybody else who contributed in one way or the other" * 'x86/grand-schemozzle' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: Add swapgs description to the Spectre v1 documentation x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS x86/entry/64: Use JMP instead of JMPQ x86/speculation: Enable Spectre v1 swapgs mitigations x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations
2019-08-06s390: put _stext and _etext into .text sectionVasily Gorbik
Perf relies on _etext and _stext symbols being one of 't', 'T', 'v' or 'V'. Put them into .text section to guarantee that. Also moves padding to page boundary inside .text which has an effect that .text section is now padded with nops rather than 0's, which apparently has been the initial intention for specifying 0x0700 fill expression. Reported-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-06s390/head64: cleanup unused labelsVasily Gorbik
Cleanup labels in head64 some of which are not being used since git recorded history. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-06s390/unwind: remove stack recursion warningVasily Gorbik
Remove pointless stack recursion on stack type ... warning, which only confuses people. There is no way to make backchain unwinder 100% reliable. When a task is interrupted in-between stack frame allocation and backchain write instructions new stack frame backchain pointer is left uninitialized (there are also sometimes additional instruction in-between stack frame allocation and backchain write instructions due to gcc shrink-wrapping). In attempt to unwind such stack the unwinder would still try to use that invalid backchain value and perform all kind of sanity checks on it to make sure we are not pointed out of stack. In some cases that invalid backchain value would be 0 and we would falsely treat next stackframe as pt_regs and again gprs[15] in those pt_regs might happen to point at some address within the task's stack. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-06s390/setup: adjust start_code of init_mm to _textVasily Gorbik
After some investigation it doesn't look like init_mm fields start_code/end_code are used anywhere besides potentially in dump_mm for debugging purposes. Originally the value of 0 for start_code reflected the presence of lowcore and early boot code. But with kaslr in place start_code/end_code range should not span over unoccupied by the code segment memory. So, adjust init_mm start_code to point at the beginning of the code segment like other architectures do it. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-06s390/mm: fix dump_pagetables top level page table walkingVasily Gorbik
Since commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") behaviour of p4d_offset, pud_offset and pmd_offset has been changed so that they cannot be used to iterate through top level page table, because the index for the top level page table is now calculated in pgd_offset. To avoid dumping the very first region/segment top level table entry 2048 times simply iterate entry pointer like it is already done in other page walking cases. Fixes: d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-06s390/protvirt: avoid memory sharing for diag 308 set/storeVasily Gorbik
This reverts commit db9492cef45e ("s390/protvirt: add memory sharing for diag 308 set/store") which due to ultravisor implementation change is not needed after all. Fixes: db9492cef45e ("s390/protvirt: add memory sharing for diag 308 set/store") Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-05MIPS: BCM63XX: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: bcm63xx_defconfig mips): arch/mips/pci/ops-bcm63xx.c: In function ‘bcm63xx_pcie_can_access’: arch/mips/pci/ops-bcm63xx.c:474:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (PCI_SLOT(devfn) == 0) ^ arch/mips/pci/ops-bcm63xx.c:477:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
2019-08-05x86: kvm: remove useless calls to kvm_para_availablePaolo Bonzini
Most code in arch/x86/kernel/kvm.c is called through x86_hyper_kvm, and thus only runs if KVM has been detected. There is no need to check again for the CPUID base. Cc: Sergio Lopez <slp@redhat.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-05KVM: no need to check return value of debugfs_create functionsGreg KH
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, when doing this, change kvm_arch_create_vcpu_debugfs() to return void instead of an integer, as we should not care at all about if this function actually does anything or not. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: <kvm@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-05KVM: remove kvm_arch_has_vcpu_debugfs()Paolo Bonzini
There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>