aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-09KEYS: Add an alloc flag to convey the builtinness of a keyDavid Howells
Add KEY_ALLOC_BUILT_IN to convey that a key should have KEY_FLAG_BUILTIN set rather than setting it after the fact. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-09v2 linux-next scripts/sign-file.c Fix LibreSSL supportCodarren Velvindron
In file included from scripts/sign-file.c:47:0: /usr/include/openssl/cms.h:62:2: error: #error CMS is disabled. #error CMS is disabled. ^ scripts/Makefile.host:91: recipe for target 'scripts/sign-file' failed make[1]: *** [scripts/sign-file] Error 1 Makefile:567: recipe for target 'scripts' failed make: *** [scripts] Error 2 Fix SSL headers so that the kernel can build with LibreSSL Signed-off-by: Codarren Velvindron <codarren@hackers.mu> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-07Linux 4.5-rc3Linus Torvalds
2016-02-07Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
2016-02-07Merge branch 'mailbox-devel' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox fixes from Jassi Brar: - fix getting element from the pcc-channels array by simply indexing into it - prevent building mailbox-test driver for archs that don't have IOMEM * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix dependencies for !HAS_IOMEM archs mailbox: pcc: fix channel calculation in get_pcc_channel()
2016-02-06Merge tag 'usb-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes for 4.5-rc3. The usual, xhci fixes for reported issues, combined with some small gadget driver fixes, and a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: harden xhci_find_next_ext_cap against device removal xhci: Fix list corruption in urb dequeue at host removal usb: host: xhci-plat: fix NULL pointer in probe for device tree case usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms usb: xhci: set SSIC port unused only if xhci_suspend succeeds usb: xhci: add a quirk bit for ssic port unused usb: xhci: handle both SSIC ports in PME stuck quirk usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. Revert "xhci: don't finish a TD if we get a short-transfer event mid TD" MAINTAINERS: fix my email address usb: dwc2: Fix probe problem on bcm2835 Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" usb: musb: ux500: Fix NULL pointer dereference at system PM usb: phy: mxs: declare variable with initialized value usb: phy: msm: fix error handling in probe.
2016-02-06Merge tag 'staging-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.5-rc3. All of them, except one, are for IIO drivers, and one is for a speakup driver fix caused by some earlier patches, to resolve a reported build failure" * tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: speakup: Fix allyesconfig build on mn10300 iio: dht11: Use boottime iio: ade7753: avoid uninitialized data iio: pressure: mpl115: fix temperature offset sign iio: imu: Fix dependencies for !HAS_IOMEM archs staging: iio: Fix dependencies for !HAS_IOMEM archs iio: adc: Fix dependencies for !HAS_IOMEM archs iio: inkern: fix a NULL dereference on error iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer. iio: light: acpi-als: Report data as processed iio: dac: mcp4725: set iio name property in sysfs iio: add HAS_IOMEM dependency to VF610_ADC iio: add IIO_TRIGGER dependency to STK8BA50 iio: proximity: lidar: correct return value iio-light: Use a signed return type for ltr501_match_samp_freq()
2016-02-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition m32r: fix build failure due to SMP and MMU ...
2016-02-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "We have a few wire protocol compatibility fixes, ports of a few recent CRUSH mapping changes, and a couple error path fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: MOSDOpReply v7 encoding libceph: advertise support for TUNABLES5 crush: decode and initialize chooseleaf_stable crush: add chooseleaf_stable tunable crush: ensure take bucket value is valid crush: ensure bucket id is valid before indexing buckets array ceph: fix snap context leak in error path ceph: checking for IS_ERR instead of NULL
2016-02-05Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes all over the place: - amdkfd: two static checker fixes - mst: a bunch of static checker and spec/hw interaction fixes - amdgpu: fix Iceland hw properly, and some fiji bugs, along with some write-combining fixes. - exynos: some regression fixes - adv7511: fix some EDID reading issues" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts ...
2016-02-05Merge tag 'pm+acpi-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are: a fix for a recently introduced false-positive warnings about PM domain pointers being changed inappropriately (harmless but annoying), an MCH size workaround quirk for one more platform, a compiler warning fix (generic power domains framework), an ACPI LPSS (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code. Specifics: - PM core fix to avoid false-positive warnings generated when the pm_domain field is cleared for a device that appears to be bound to a driver (Rafael Wysocki). - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer). - Fix for an "unused function" compiler warning in the generic power domains framework (Ulf Hansson). - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM domain pointer of a device properly in one place that was overlooked by a recent PM core update (Andy Shevchenko). - Removal of a redundant function declaration in the ACPI CPPC core code (Timur Tabi)" * tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Avoid false-positive warnings in dev_pm_domain_set() PM / Domains: Silence compiler warning for an unused function ACPI / CPPC: remove redundant mbox_send_message() declaration ACPI / LPSS: set PM domain via helper setter PNP: Add Haswell-ULT to Intel MCH size workaround
2016-02-05epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUTJason Baron
In the current implementation of the EPOLLEXCLUSIVE flag (added for 4.5-rc1), if epoll waiters create different POLL* sets and register them as exclusive against the same target fd, the current implementation will stop waking any further waiters once it finds the first idle waiter. This means that waiters could miss wakeups in certain cases. For example, when we wake up a pipe for reading we do: wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if one epoll set or epfd is added to pipe p with POLLIN and a second set epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the wakeup since the current implementation will stop after it finds any intersection of events with a waiter that is blocked in epoll_wait(). We could potentially address this by requiring all epoll waiters that are added to p be required to pass the same set of POLL* events. IE the first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL* flags to be used by any other epfds that are added as EPOLLEXCLUSIVE. However, I think it might be somewhat confusing interface as we would have to reference count the number of users for that set, and so userspace would have to keep track of that count, or we would need a more involved interface. It also adds some shared state that we'd have store somewhere. I don't think anybody will want to bloat __wait_queue_head for this. I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE such that it can only be specified with EPOLLIN and/or EPOLLOUT. So that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop once we hit the first idle waiter that specifies the EPOLLIN bit, since any remaining waiters that only have 'POLLOUT' set wouldn't need to be woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the wake bit set (there is at least one example of this I saw in fs/pipe.c), then we just wake the entire exclusive list. Having both 'POLLOUT' and 'POLLIN' both set should not be on any performance critical path, so I think that's ok (in fs/pipe.c its in pipe_release()). We also continue to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus, the user can specify EPOLLERR and/or EPOLLHUP but is not required to do so. Since epoll waiters may be interested in other events as well besides EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by doing a 'dup' call on the target fd and adding that as one normally would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT events are what we are interest in balancing, I think that the 'dup' thing could perhaps be added to only one of the waiter threads. However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be sufficient for the majority of use-cases. Since EPOLLEXCLUSIVE is intended to be used with a target fd shared among multiple epfds, where between 1 and n of the epfds may receive an event, it does not satisfy the semantics of EPOLLONESHOT where only 1 epfd would get an event. Thus, it is not allowed to be specified in conjunction with EPOLLEXCLUSIVE. EPOLL_CTL_MOD is also not allowed if the fd was previously added as EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as interesting, but this could be relaxed at some further point. Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Madars Vitolins <m@silodev.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05radix-tree: fix oops after radix_tree_iter_retryKonstantin Khlebnikov
Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05MAINTAINERS: trim the file triggers for ABI/APIMichael Kerrisk (man-pages)
Commit ea8f8fc8631 ("MAINTAINERS: add linux-api for review of API/ABI changes") added file triggers for various paths that likely indicated API/ABI changes. However, catching all changes in Documentation/ABI/ and include/uapi/ produces a large volume of mail to linux-api, rather than only API/ABI changes. Drop those two entries, but leave include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related changes. [josh@joshtriplett.org: redid changelog] Signed-off-by: Michael Kerrisk <mtk.man-pages@gmail.com> Acked-by: Shuah khan <shuahkh@osg.samsung.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05dax: dirty inode only if requiredDmitry Monakhov
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05thp: make deferred_split_scan() work againKirill A. Shutemov
We need to iterate over split_queue, not local empty list to get anything split from the shrinker. Fixes: e3ae19535c66 ("thp: limit number of object to scan on deferred_split_scan()") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm: replace vma_lock_anon_vma with anon_vma_lock_read/writeKonstantin Khlebnikov
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.com Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanupxuejiufei
When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05um: asm/page.h: remove the pte_high member from struct pte_tNicolai Stange
Commit 16da306849d0 ("um: kill pfn_t") introduced a compile warning for defconfig (SUBARCH=i386): arch/um/kernel/skas/mmu.c:38:206: warning: right shift count >= width of type [-Wshift-count-overflow] Aforementioned patch changes the definition of the phys_to_pfn() macro from ((pfn_t) ((p) >> PAGE_SHIFT)) to ((p) >> PAGE_SHIFT) This effectively changes the phys_to_pfn() expansion's type from unsigned long long to unsigned long. Through the callchain init_stub_pte() => mk_pte(), the expansion of phys_to_pfn() is (indirectly) fed into the 'phys' argument of the pte_set_val(pte, phys, prot) macro, eventually leading to (pte).pte_high = (phys) >> 32; This results in the warning from above. Since UML only deals with 32 bit addresses, the upper 32 bits from 'phys' used to be always zero anyway. Also, all page protection flags defined by UML don't use any bits beyond bit 9. Since the contents of a PTE are defined within architecture scope only, the ->pte_high member can be safely removed. Remove the ->pte_high member from struct pte_t. Rename ->pte_low to ->pte. Adapt the pte helper macros in arch/um/include/asm/page.h. Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped. This write barrier doesn't seem to be paired with any read barrier though and thus, was useless anyway. Fixes: 16da306849d0 ("um: kill pfn_t") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Richard Weinberger <richard@nod.at> Cc: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm, hugetlb: don't require CMA for runtime gigantic pagesVlastimil Babka
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime") has added the runtime gigantic page allocation via alloc_contig_range(), making this support available only when CONFIG_CMA is enabled. Because it doesn't depend on MIGRATE_CMA pageblocks and the associated infrastructure, it is possible with few simple adjustments to require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA. After this patch, alloc_contig_range() and related functions are available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION enabled. Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION. This allows supporting runtime gigantic pages without the CMA-specific checks in page allocator fastpaths. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm/hugetlb: fix gigantic page initialization/allocationMike Kravetz
Attempting to preallocate 1G gigantic huge pages at boot time with "hugepagesz=1G hugepages=1" on the kernel command line will prevent booting with the following: kernel BUG at mm/hugetlb.c:1218! When mapcount accounting was reworked, the setting of compound_mapcount_ptr in prep_compound_gigantic_page was overlooked. As a result, the validation of mapcount in free_huge_page fails. The "BUG_ON" checks in free_huge_page were also changed to "VM_BUG_ON_PAGE" to assist with debugging. Fixes: 53f9263baba69 ("mm: rework mapcount accounting to enable 4k mapping of THPs") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: David Rientjes <rientjes@google.com> Tested-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm: downgrade VM_BUG in isolate_lru_page() to warningKirill A. Shutemov
Calling isolate_lru_page() is wrong and shouldn't happen, but it not nessesary fatal: the page just will not be isolated if it's not on LRU. Let's downgrade the VM_BUG_ON_PAGE() to WARN_RATELIMIT(). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mempolicy: do not try to queue pages from !vma_migratable()Kirill A. Shutemov
Maybe I miss some point, but I don't see a reason why we try to queue pages from non migratable VMAs. This testcase steps on VM_BUG_ON_PAGE() in isolate_lru_page(): #include <fcntl.h> #include <unistd.h> #include <stdio.h> #include <sys/mman.h> #include <numaif.h> #define SIZE 0x2000 int foo; int main() { int fd; char *p; unsigned long mask = 2; fd = open("/dev/sg0", O_RDWR); p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); /* Faultin pages */ foo = p[0] + p[0x1000]; mbind(p, SIZE, MPOL_BIND, &mask, 4, MPOL_MF_MOVE | MPOL_MF_STRICT); return 0; } The only case when we can queue pages from such VMA is MPOL_MF_STRICT plus MPOL_MF_MOVE or MPOL_MF_MOVE_ALL for VMA which has pages on LRU, but gfp mask is not sutable for migaration (see mapping_gfp_mask() check in vma_migratable()). That's looks like a bug to me. Let's filter out non-migratable vma at start of queue_pages_test_walk() and go to queue_pages_pte_range() only if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL flag is set. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progressTetsuo Handa
Jan Stancek has reported that system occasionally hanging after "oom01" testcase from LTP triggers OOM. Guessing from a result that there is a kworker thread doing memory allocation and the values between "Node 0 Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not up-to-date for some reason. According to commit 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress"), it meant to force the kworker thread to take a short sleep, but it by error used schedule_timeout(1). We missed that schedule_timeout() in state TASK_RUNNING doesn't do anything. Fix it by using schedule_timeout_uninterruptible(1) which forces the kworker thread to take a short sleep in order to make sure that vmstat is up-to-date. Fixes: 373ccbe59270 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Jan Stancek <jstancek@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Cristopher Lameter <clameter@sgi.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Arkadiusz Miskiewicz <arekm@maven.pl> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05vmstat: make vmstat_update deferrableMichal Hocko
Commit 0eb77e988032 ("vmstat: make vmstat_updater deferrable again and shut down on idle") made vmstat_shepherd deferrable. vmstat_update itself is still useing standard timer which might interrupt idle task. This is possible because "mm, vmstat: make quiet_vmstat lighter" removed cancel_delayed_work from the quiet_vmstat. Change vmstat_work to use DEFERRABLE_WORK to prevent from pointless wakeups from the idle context. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm, vmstat: make quiet_vmstat lighterMichal Hocko
Mike has reported a considerable overhead of refresh_cpu_vm_stats from the idle entry during pipe test: 12.89% [kernel] [k] refresh_cpu_vm_stats.isra.12 4.75% [kernel] [k] __schedule 4.70% [kernel] [k] mutex_unlock 3.14% [kernel] [k] __switch_to This is caused by commit 0eb77e988032 ("vmstat: make vmstat_updater deferrable again and shut down on idle") which has placed quiet_vmstat into cpu_idle_loop. The main reason here seems to be that the idle entry has to get over all zones and perform atomic operations for each vmstat entry even though there might be no per cpu diffs. This is a pointless overhead for _each_ idle entry. Make sure that quiet_vmstat is as light as possible. First of all it doesn't make any sense to do any local sync if the current cpu is already set in oncpu_stat_off because vmstat_update puts itself there only if there is nothing to do. Then we can check need_update which should be a cheap way to check for potential per-cpu diffs and only then do refresh_cpu_vm_stats. The original patch also did cancel_delayed_work which we are not doing here. There are two reasons for that. Firstly cancel_delayed_work from idle context will blow up on RT kernels (reported by Mike): CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rt3 #7 Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013 Call Trace: dump_stack+0x49/0x67 ___might_sleep+0xf5/0x180 rt_spin_lock+0x20/0x50 try_to_grab_pending+0x69/0x240 cancel_delayed_work+0x26/0xe0 quiet_vmstat+0x75/0xa0 cpu_idle_loop+0x38/0x3e0 cpu_startup_entry+0x13/0x20 start_secondary+0x114/0x140 And secondly, even on !RT kernels it might add some non trivial overhead which is not necessary. Even if the vmstat worker wakes up and preempts idle then it will be most likely a single shot noop because the stats were already synced and so it would end up on the oncpu_stat_off anyway. We just need to teach both vmstat_shepherd and vmstat_update to stop scheduling the worker if there is nothing to do. [mgalbraith@suse.de: cancel pending work of the cpu_stat_off CPU] Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Mike Galbraith <mgalbraith@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INITVlastimil Babka
The description mentions kswapd threads, while the deferred struct page initialization is actually done by one-off "pgdatinitX" threads. Fix the description so that potentially users are not confused about pgdatinit threads using CPU after boot instead of kswapd. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05memblock: don't mark memblock_phys_mem_size() as __initDavid Gibson
At the moment memblock_phys_mem_size() is marked as __init, and so is discarded after boot. This is different from most of the memblock functions which are marked __init_memblock, and are only discarded after boot if memory hotplug is not configured. To allow for upcoming code which will need memblock_phys_mem_size() in the hotplug path, change it from __init to __init_memblock. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05dump_stack: avoid potential deadlocksEric Dumazet
Some servers experienced fatal deadlocks because of a combination of bugs, leading to multiple cpus calling dump_stack(). The checksumming bug was fixed in commit 34ae6a1aa054 ("ipv6: update skb->csum when CE mark is propagated"). The second problem is a faulty locking in dump_stack() CPU1 runs in process context and calls dump_stack(), grabs dump_lock. CPU2 receives a TCP packet under softirq, grabs socket spinlock, and call dump_stack() from netdev_rx_csum_fault(). dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since dump_lock is owned by CPU1 While dumping its stack, CPU1 is interrupted by a softirq, and happens to process a packet for the TCP socket locked by CPU2. CPU1 spins forever in spin_lock() : deadlock Stack trace on CPU1 looked like : NMI backtrace for cpu 1 RIP: _raw_spin_lock+0x25/0x30 ... Call Trace: <IRQ> tcp_v6_rcv+0x243/0x620 ip6_input_finish+0x11f/0x330 ip6_input+0x38/0x40 ip6_rcv_finish+0x3c/0x90 ipv6_rcv+0x2a9/0x500 process_backlog+0x461/0xaa0 net_rx_action+0x147/0x430 __do_softirq+0x167/0x2d0 call_softirq+0x1c/0x30 do_softirq+0x3f/0x80 irq_exit+0x6e/0xc0 smp_call_function_single_interrupt+0x35/0x40 call_function_single_interrupt+0x6a/0x70 <EOI> printk+0x4d/0x4f printk_address+0x31/0x33 print_trace_address+0x33/0x3c print_context_stack+0x7f/0x119 dump_trace+0x26b/0x28e show_trace_log_lvl+0x4f/0x5c show_stack_log_lvl+0x104/0x113 show_stack+0x42/0x44 dump_stack+0x46/0x58 netdev_rx_csum_fault+0x38/0x3c __skb_checksum_complete_head+0x6e/0x80 __skb_checksum_complete+0x11/0x20 tcp_rcv_established+0x2bd5/0x2fd0 tcp_v6_do_rcv+0x13c/0x620 sk_backlog_rcv+0x15/0x30 release_sock+0xd2/0x150 tcp_recvmsg+0x1c1/0xfc0 inet_recvmsg+0x7d/0x90 sock_recvmsg+0xaf/0xe0 ___sys_recvmsg+0x111/0x3b0 SyS_recvmsg+0x5c/0xb0 system_call_fastpath+0x16/0x1b Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05mm: validate_mm browse_rb SMP race conditionAndrea Arcangeli
The mmap_sem for reading in validate_mm called from expand_stack is not enough to prevent the argumented rbtree rb_subtree_gap information to change from under us because expand_stack may be running from other threads concurrently which will hold the mmap_sem for reading too. The argumented rbtree is updated with vma_gap_update under the page_table_lock so use it in browse_rb() too to avoid false positives. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05m32r: fix build failure due to SMP and MMUSudip Mukherjee
One of the randconfig build failed with the error: arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_mm': arch/m32r/kernel/smp.c:283:20: error: subscripted value is neither array nor pointer nor vector mmc = &mm->context[cpu_id]; ^ arch/m32r/kernel/smp.c: In function 'smp_flush_tlb_page': arch/m32r/kernel/smp.c:353:20: error: subscripted value is neither array nor pointer nor vector mmc = &mm->context[cpu_id]; ^ arch/m32r/kernel/smp.c: In function 'smp_invalidate_interrupt': arch/m32r/kernel/smp.c:479:41: error: subscripted value is neither array nor pointer nor vector unsigned long *mmc = &flush_mm->context[cpu_id]; It turned out that CONFIG_SMP was defined but CONFIG_MMU was not defined. But arch/m32r/include/asm/mmu.h only defines mm_context_t as an array when both CONFIG_SMP and CONFIG_MMU are defined. And arch/m32r/kernel/smp.c is always using context as an array. So without MMU SMP can not work. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05block: fix pfn_mkwrite() DAX fault handlerRoss Zwisler
Previously the pfn_mkwrite() fault handler for raw block devices called bldev_dax_fault() -> __dax_fault() to do a full DAX page fault. Really what the pfn_mkwrite() fault handler needs to do is call dax_pfn_mkwrite() to make sure that the radix tree entry for the given PTE is marked as dirty so that a follow-up fsync or msync call will flush it durably to media. Fixes: 5a023cdba50c ("block: enable dax for raw block devices") Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-05signals: avoid random wakeups in sigsuspend()Sasha Levin
A random wakeup can get us out of sigsuspend() without TIF_SIGPENDING being set. Avoid that by making sure we were signaled, like sys_pause() does. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06Merge branches 'pm-core' and 'pm-domains'Rafael J. Wysocki
* pm-core: PM: Avoid false-positive warnings in dev_pm_domain_set() ACPI / LPSS: set PM domain via helper setter * pm-domains: PM / Domains: Silence compiler warning for an unused function
2016-02-06Merge branches 'pnp' and 'acpi-cppc'Rafael J. Wysocki
* pnp: PNP: Add Haswell-ULT to Intel MCH size workaround * acpi-cppc: ACPI / CPPC: remove redundant mbox_send_message() declaration
2016-02-05Merge tag 'media/v4.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - vb2: fix a vb2_thread regression and DVB read() breakages - vsp1: fix compilation and links creation - s5k6a3: Fix VIDIOC_SUBDEV_G_FMT ioctl for TRY format - exynos4-is: fix a build issue, format negotiation and sensor detection - Fix a regression with pvrusb2 and ir-kbd-i2c - atmel-isi: fix debug message which only show the first format - tda1004x: fix a tuning bug if G_PROPERTY is called too early - saa7134-alsa: fix a bug at device unbinding/driver removal - Fix build of one driver if !HAS_DMA - soc_camera: cleanup control device on async_unbind * tag 'media/v4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] saa7134-alsa: Only frees registered sound cards [media] vb2-core: call threadio->fnc() if !VB2_BUF_STATE_ERROR [media] vb2: fix nasty vb2_thread regression [media] tda1004x: only update the frontend properties if locked [media] media: i2c: Don't export ir-kbd-i2c module alias [media] exynos4-is: make VIDEO_SAMSUNG_EXYNOS4_IS tristate [media] media: Kconfig: add dependency of HAS_DMA [media] exynos4-is: Wait for 100us before opening sensor [media] exynos4-is: Open shouldn't fail when sensor entity is not linked [media] s5k6a3: Fix VIDIOC_SUBDEV_G_FMT ioctl for TRY format [media] exynos4-is: fix a format string bug [media] drivers/media: vsp1_video: fix compile error [media] atmel-isi: fix debug message which only show the first format [media] soc_camera: cleanup control device on async_unbind [media] v4l: vsp1: Fix wrong entities links creation
2016-02-05Merge tag 'sound-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This was a busy week and I had to prepare a pile of duct tapes for the bugs reported by syzkaller fuzzer in wide range of ALSA core APIs: timer, rawmidi, sequencer, and PCM OSS emulation. Let's see how many other holes we need to plug. Besides that, a few usual boring stuff, HD- and USB-audio quirks, have been added" * tag 'sound-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Fix leftover link at closing ALSA: seq: Fix lockdep warnings due to double mutex locks ALSA: rawmidi: Fix race at copying & updating the position ALSA: rawmidi: Make snd_rawmidi_transmit() race-free ALSA: hda - Add fixup for Mac Mini 7,1 model ALSA: hda/realtek - Support headset mode for ALC225 ALSA: hda/realtek - Support Dell headset mode for ALC225 ALSA: hda/realtek - New codec support of ALC225 ALSA: timer: Sync timer deletion at closing the system timer ALSA: timer: Fix link corruption due to double start or stop ALSA: seq: Fix yet another races among ALSA timer accesses ALSA: pcm: Fix potential deadlock in OSS emulation ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check ALSA: seq: Fix race at closing in virmidi driver ALSA: emu10k1: correctly handling failed thread creation ALSA: usb-audio: Add quirk for Microsoft LifeCam HD-6000 ALSA: usb-audio: Add native DSD support for PS Audio NuWave DAC ALSA: usb-audio: Fix OPPO HA-1 vendor ID
2016-02-05Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This fixes several Kconfig dependencies, a compilation warning in pcwd_usb, a failure to abort the sp805 wdt after a ping and the max63xx wdt's MODULE_LICENSE" * git://www.linux-watchdog.org/linux-watchdog: watchdog: Fix dependencies for !HAS_IOMEM archs watchdog: imgdpc: select WATCHDOG_CORE watchdog: tango: rename ARCH_TANGOX to ARCH_TANGO watchdog: pcwd_usb: fix compilation warning watchdog: sp805: ping fails to abort wdt reset watchdog: max63xx: make module's license marker match the header
2016-02-05Merge branch 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux ↵Dave Airlie
into drm-fixes displayport multistream fixes from AMD. * 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux: drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease
2016-02-05drm/dp/mst: deallocate payload on port destructionMykola Lysenko
This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: Reverse order of MST enable and clearing VC payload table.Andrey Grodzovsky
On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: move GUID storage from mgr, port to only mst branchHersen Wu
Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: change MST detection schemeMykola Lysenko
1. Get edid for all connected MST displays, not only on logical ports, in the same thread as MST topology detection is done: There are displays that have branches inside w/o logical ports. So in case another SST display connected downstream system can end-up in situation when 3 DOWN requests sent: two for ‘remote i2c read’ and one for ‘enum path resources’, making slots full. 2. Call notification callback in one place in the end of topology discovery/update: This is done to reduce number of events sent to userspace in case complex topology discovery is going, adding multiple number of connectors; 3. Remove notification callback call from short pulse interrupt processing function: This is done in order not to block interrupt processing function, in case any MST request will be made from it. Notification will be send from topology discovery/update work item. Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/dp/mst: Calculate MST PBN with 31.32 fixed pointHarry Wentland
Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm: Add drm_fixp_from_fraction and drm_fixp2int_ceilHarry Wentland
drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/mst: Add range check for max_payloads during initImre Deak
max_payload is limited by the space we have in drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id(). Add a sanity check for this. Caught by coverity. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: David Weinehall <david.weinehall@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm/mst: Don't ignore the MST PBN self-test resultImre Deak
Otherwise this call would have no effect. Caught by Coverity. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: David Weinehall <david.weinehall@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05drm: fix missing reference counting decreaseInsu Yun
In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by: Insu Yun <wuninsu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-05Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes - fix and enable iceland/topaz support - handle WC on platforms that don't support it * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts drm/amdgpu: mask out WC from BO on unsupported arches drm/radeon: mask out WC from BO on unsupported arches drm: add helper to check for wc memory support drm/amdgpu: no need to load MC firmware on fiji
2016-02-05Merge tag 'drm-amdkfd-fixes-2016-01-28' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes two static checker fixes. * tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Remove unnecessary cast in kfree drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()