aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-24 09:34:23 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-24 09:34:23 -0700
commitaa5b1054badb60191f6a09e7ef65beacf837c5d4 (patch)
tree9ec22c3c6a17aa6775f4950310d2071eeb9ee95d /arch/powerpc/kernel
parente1dbc5a41051d4791160727829903ec5169c7152 (diff)
parent0f52b3a00c789569d7ed822b5a6b30f59a8d4393 (diff)
download96b-common-aa5b1054badb60191f6a09e7ef65beacf837c5d4.tar.gz
Merge tag 'powerpc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman: - An implementation for the newly added hv_ops->flush() for the OPAL hvc console driver backends, I forgot to apply this after merging the hvc driver changes before the merge window. - Enable all PCI bridges at boot on powernv, to avoid races when multiple children of a bridge try to enable it simultaneously. This is a workaround until the PCI core can be enhanced to fix the races. - A fix to query PowerVM for the correct system topology at boot before initialising sched domains, seen in some configurations to cause broken scheduling etc. - A fix for pte_access_permitted() on "nohash" platforms. - Two commits to fix SIGBUS when using remap_pfn_range() seen on Power9 due to a workaround when using the nest MMU (GPUs, accelerators). - Another fix to the VFIO code used by KVM, the previous fix had some bugs which caused guests to not start in some configurations. - A handful of other minor fixes. Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Christophe Leroy, Hari Bathini, Luke Dashjr, Mahesh Salgaonkar, Nicholas Piggin, Paul Mackerras, Srikar Dronamraju. * tag 'powerpc-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mce: Fix SLB rebolting during MCE recovery path. KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pages powerpc/mm/radix: Only need the Nest MMU workaround for R -> RW transition powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid. powerpc/nohash: fix pte_access_permitted() powerpc/topology: Get topology for shared processors at boot powerpc64/ftrace: Include ftrace.h needed for enable/disable calls powerpc/powernv/pci: Work around races in PCI bridge enabling powerpc/fadump: cleanup crash memory ranges support powerpc/powernv: provide a console flush operation for opal hvc driver powerpc/traps: Avoid rate limit messages from show unhandled signals powerpc/64s: Fix PACA_IRQ_HARD_DIS accounting in idle_power4()
Diffstat (limited to 'arch/powerpc/kernel')
-rw-r--r--arch/powerpc/kernel/fadump.c8
-rw-r--r--arch/powerpc/kernel/idle_power4.S16
-rw-r--r--arch/powerpc/kernel/smp.c5
-rw-r--r--arch/powerpc/kernel/traps.c13
4 files changed, 26 insertions, 16 deletions
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 986ec476fd5d..a711d22339ea 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -34,6 +34,7 @@
#include <linux/crash_dump.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <asm/debugfs.h>
#include <asm/page.h>
@@ -1019,13 +1020,6 @@ static int fadump_setup_crash_memory_ranges(void)
pr_debug("Setup crash memory ranges.\n");
crash_mem_ranges = 0;
- /* allocate memory for crash memory ranges for the first time */
- if (!max_crash_mem_ranges) {
- ret = allocate_crash_memory_ranges();
- if (ret)
- return ret;
- }
-
/*
* add the first memory chunk (RMA_START through boot_memory_size) as
* a separate memory chunk. The reason is, at the time crash firmware
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index dd7471fe20bd..a09b3c7ca176 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -32,6 +32,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
cmpwi 0,r4,0
beqlr
+ /* This sequence is similar to prep_irq_for_idle() */
+
/* Hard disable interrupts */
mfmsr r7
rldicl r0,r7,48,1
@@ -41,10 +43,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
/* Check if something happened while soft-disabled */
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
- bnelr
+ bne- 2f
- /* Soft-enable interrupts */
+ /*
+ * Soft-enable interrupts. This will make power4_fixup_nap return
+ * to our caller with interrupts enabled (soft and hard). The caller
+ * can cope with either interrupts disabled or enabled upon return.
+ */
#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Tell the tracer interrupts are on, because idle responds to them. */
mflr r0
std r0,16(r1)
stdu r1,-128(r1)
@@ -73,3 +80,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
isync
b 1b
+2: /* Return if an interrupt had happened while soft disabled */
+ /* Set the HARD_DIS flag because interrupts are now hard disabled */
+ ori r0,r0,PACA_IRQ_HARD_DIS
+ stb r0,PACAIRQHAPPENED(r13)
+ blr
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index b19d832ef386..61c1fadbc644 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1160,6 +1160,11 @@ void __init smp_cpus_done(unsigned int max_cpus)
if (smp_ops && smp_ops->bringup_done)
smp_ops->bringup_done();
+ /*
+ * On a shared LPAR, associativity needs to be requested.
+ * Hence, get numa topology before dumping cpu topology
+ */
+ shared_proc_topology_init();
dump_numa_cpu_topology();
/*
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 070e96f1773a..c85adb858271 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -315,22 +315,21 @@ void user_single_step_siginfo(struct task_struct *tsk,
info->si_addr = (void __user *)regs->nip;
}
-static bool show_unhandled_signals_ratelimited(void)
+static void show_signal_msg(int signr, struct pt_regs *regs, int code,
+ unsigned long addr)
{
static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
- return show_unhandled_signals && __ratelimit(&rs);
-}
-static void show_signal_msg(int signr, struct pt_regs *regs, int code,
- unsigned long addr)
-{
- if (!show_unhandled_signals_ratelimited())
+ if (!show_unhandled_signals)
return;
if (!unhandled_signal(current, signr))
return;
+ if (!__ratelimit(&rs))
+ return;
+
pr_info("%s[%d]: %s (%d) at %lx nip %lx lr %lx code %x",
current->comm, current->pid, signame(signr), signr,
addr, regs->nip, regs->link, code);