path: root/kernel/irq/settings.h
AgeCommit message (Collapse)Author
2020-09-13genirq: Allow interrupts to be excluded from /proc/interruptsMarc Zyngier
A number of architectures implement IPI statistics directly, duplicating the core kstat_irqs accounting. As we move IPIs to being actual IRQs, we would end-up with a confusing display in /proc/interrupts (where the IPIs would appear twice). In order to solve this, allow interrupts to be flagged as "hidden", which excludes them from /proc/interrupts. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-11genirq: Add flag to force mask in disable_irq[_nosync]()Thomas Gleixner
If an irq chip does not implement the irq_disable callback, then we use a lazy approach for disabling the interrupt. That means that the interrupt is marked disabled, but the interrupt line is not immediately masked in the interrupt chip. It only becomes masked if the interrupt is raised while it's marked disabled. We use this to avoid possibly expensive mask/unmask operations for common case operations. Unfortunately there are devices which do not allow the interrupt to be disabled easily at the device level. They are forced to use disable_irq_nosync(). This can result in taking each interrupt twice. Instead of enforcing the non lazy mode on all interrupts of a irq chip, provide a settings flag, which can be set by the driver for that particular interrupt line. Reported-and-tested-by: Duc Dang <dhdang@apm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos
2013-11-13genirq: Prevent spurious detection for unconditionally polled interruptsThomas Gleixner
On a 68k platform a couple of interrupts are demultiplexed and "polled" from a top level interrupt. Unfortunately there is no way to determine which of the sub interrupts raised the top level interrupt, so all of the demultiplexed interrupt handlers need to be invoked. Given a high enough frequency this can trigger the spurious interrupt detection mechanism, if one of the demultiplex interrupts returns IRQ_NONE continuously. But this is a false positive as the polling causes this behaviour and not buggy hardware/software. Introduce IRQ_POLLED which can be set at interrupt chip setup time via irq_set_status_flags(). The flag excludes the interrupt from the spurious detector and from all core polling activities. Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311061149250.23353@ionos.tec.linutronix.de
2011-10-03genirq: Add support for per-cpu dev_id interruptsMarc Zyngier
The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-23genirq: Support per-IRQ thread disabling.Paul Mundt
This adds support for disabling threading on a per-IRQ basis via the IRQ status instead of the IRQ flow, which is necessary for interrupts that don't follow the natural IRQ flow channels, such as those that are virtually created. The new APIs added are simply: irq_set_thread() irq_set_nothread() which follow the rest of the IRQ status routines. Chained handlers also have IRQ_NOTHREAD set on them automatically, making the lack of threading explicit rather than implicit. Subsequently, the nothread flag can be viewed through the standard genirq debugging facilities. [ tglx: Fixed cleanup fallout ] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq: Remove compat codeThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove desc->status when GENERIC_HARDIRQS_NO_COMPAT=yThomas Gleixner
If everything uses the right accessors, then enabling GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you. Don't be lazy and use the trick which I use in the core code! git grep status_use_accessors will unearth it in a split second. Offenders are tracked down and not slapped with stinking trouts. This time we use frozen shark for a better educational value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Cleanup irq.hThomas Gleixner
Put the constants into an enum and document them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Force wrapped access to desc->status in core codeThomas Gleixner
Force the usage of wrappers by another nasty CPP substitution. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Wrap the remaning IRQ_* flagsThomas Gleixner
Use wrappers to keep them away from the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner
That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AFFINITY_SET to coreThomas Gleixner
Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_WAKEUP to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_PENDING flag to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_DISABLED to coreThomas Gleixner
Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_INPROGRESS to coreThomas Gleixner
We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Protect tglx from tripping over his own feetThomas Gleixner
The irq_desc.status field will either go away or renamed to settings. Anyway we need to maintain compatibility to avoid breaking the world and some more. While moving bits into the core, I need to avoid that I use any of the still existing IRQ_ bits in the core code by typos. So that file will hold the inline wrappers and some nasty CPP tricks to break the build when typoed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>