aboutsummaryrefslogtreecommitdiff
path: root/kernel/irq/Makefile
AgeCommit message (Collapse)Author
2019-06-12genirq/timings: Add selftest for circular arrayDaniel Lezcano
Due to the complexity of the code and the difficulty to debug it, add some selftests to the framework in order to spot issues or regression at boot time when the runtime testing is enabled for this subsystem. This tests the circular buffer at the limits and validates: - the encoding / decoding of the values - the macro to browse the irq timings circular buffer - the function to push data in the circular buffer Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20190527205521.12091-7-daniel.lezcano@linaro.org
2017-11-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-25genirq: Implement bitmap matrix allocatorThomas Gleixner
Implement the infrastructure for a simple bitmap based allocator, which will replace the x86 vector allocator. It's in the core code as other architectures might be able to reuse/extend it. For now it only implements allocations for single CPUs, but it's simple to add multi CPU allocation support if required. The concept is rather simple: Global information: system_vector bitmap global accounting PerCPU information: allocation bitmap managed allocation bitmap local accounting The system vector bitmap is used to exclude vectors system wide from the allocation space. The allocation bitmap is used to keep track of per cpu used vectors. The managed allocation bitmap is used to reserve vectors for managed interrupts. When a regular (non managed) interrupt allocation happens then the following rule applies: tmpmap = system_map | alloc_map | managed_map find_zero_bit(tmpmap) Oring the bitmaps together gives the real available space. The same rule applies for reserving a managed interrupt vector. But contrary to the regular interrupts the reservation only marks the bit in the managed map and therefor excludes it from the regular allocations. The managed map is only cleaned out when the a managed interrupt is completely released and it stays alive accross CPU offline/online operations. For managed interrupt allocations the rule is: tmpmap = managed_map & ~alloc_map find_first_bit(tmpmap) This returns the first bit which is in the managed map, but not yet allocated in the allocation map. The allocation marks it in the allocation map and hands it back to the caller for use. The rest of the code are helper functions to handle the various requirements and the accounting which are necessary to replace the x86 vector allocation code. The result is a single patch as the evolution of this infrastructure cannot be represented in bits and pieces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.185437174@linutronix.de
2017-08-16genirq/irq_sim: Add a simple interrupt simulator frameworkBartosz Golaszewski
Implement a simple, irq_work-based framework for simulating interrupts. Currently the API exposes routines for initializing and deinitializing the simulator object, enqueueing the interrupts and retrieving the allocated interrupt numbers based on the offset of the dummy interrupt in the simulator struct. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Cc: Jonathan Cameron <jic23@kernel.org> Link: http://lkml.kernel.org/r/20170814145318.6495-2-brgl@bgdev.pl Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-24genirq/timings: Add infrastructure to track the interrupt timingsDaniel Lezcano
The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-22genirq/debugfs: Add proper debugfs interfaceThomas Gleixner
Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectorsChristoph Hellwig
This is lifted from the blk-mq code and adopted to use the affinity mask concept just introduced in the irq handling code. It tries to keep the algorithm the same as the one current used by blk-mq, but improvements like assining vectors on a per-node basis instead of just per sibling are possible with this simple move and refactoring. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-7-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-25genirq: Add a new generic IPI reservation code to irq coreQais Yousef
Add a generic mechanism to dynamically allocate an IPI. Depending on the underlying implementation this creates either a single Linux irq or a consective range of Linux irqs. The Linux irq is used later to send IPIs to other CPUs. [ tglx: Massaged the code and removed the 'consecutive mask' restriction for the single IRQ case ] Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-9-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-01genirq: Introduce generic irq migration for cpu hotunplugYang Yingliang
ARM and ARM64 have almost identical code for migrating interrupts on cpu hotunplug. Provide a generic version which can be used by both. The new code addresses a shortcoming in the ARM[64] variants which fails to update the affinity change in some cases. The solution for this is to use the core function irq_do_set_affinity() instead of open coding it. [ tglx: Added copyright notice and license boilerplate. Rewrote subject and changelog. ] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: <linux-arm-kernel@lists.infradead.org> Link: http://lkml.kernel.org/r/1443087135-17044-2-git-send-email-yangyingliang@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-23genirq: Add generic msi irq domain supportJiang Liu
Implement the basic functions for MSI interrupt support with hierarchical interrupt domains. [ tglx: Extracted and combined from several patches ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-07-28irq: add irq_domain translation infrastructureGrant Likely
This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-02genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIPThomas Gleixner
Only compile it in when there are users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org
2011-04-23genirq: Implement a generic interrupt chipThomas Gleixner
Implement a generic interrupt chip, which is configurable and is able to handle the most common irq chip implementations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by; Kevin Hilman <khilman@ti.com>
2010-10-12genirq: Remove the now unused sparse irq leftoversThomas Gleixner
The move_irq_desc() function was only used due to the problem that the allocator did not free the old descriptors. So the descriptors had to be moved in create_irq_nr(). That's history. The code would have never been able to move active interrupt descriptors on affinity settings. That can be done in a completely different way w/o all this horror. Remove all of it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Distangle kernel/irq/handle.cThomas Gleixner
kernel/irq/handle.c has become a dumpground for random code in random order. Split out the irq descriptor management and the dummy irq_chip implementation into separate files. Cleanup the include maze while at it. No code change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2009-05-01x86/irq: use move_irq_desc() in create_irq_nr()Yinghai Lu
move_irq_desc() will try to move irq_desc to the home node if the allocated one is not correct, in create_irq_nr(). ( This can happen on devices that are on different nodes that are using MSI, when drivers are loaded and unloaded randomly. ) v2: fix non-smp build v3: add NUMA_IRQ_DESC to eliminate #ifdefs [ Impact: improve irq descriptor locality on NUMA systems ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F95EAE.2050903@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESCYinghai Lu
The original feature of migrating irq_desc dynamic was too fragile and was causing problems: it caused crashes on systems with lots of cards with MSI-X when user-space irq-balancer was enabled. We now have new patches that create irq_desc according to device numa node. This patch removes the leftover bits of the dynamic balancer. [ Impact: remove dead code ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F654AF.8000808@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30PM: Introduce functions for suspending and resuming device interruptsRafael J. Wysocki
Introduce helper functions allowing us to prevent device drivers from getting any interrupts (without disabling interrupts on the CPU) during suspend (or hibernation) and to make them start to receive interrupts again during the subsequent resume. These functions make it possible to keep timer interrupts enabled while the "late" suspend and "early" resume callbacks provided by device drivers are being executed. In turn, this allows device drivers' "late" suspend and "early" resume callbacks to sleep, execute ACPI callbacks etc. The functions introduced here will be used to rework the handling of interrupts during suspend (hibernation) and resume. Namely, interrupts will only be disabled on the CPU right before suspending sysdevs, while device drivers will be prevented from receiving interrupts, with the help of the new helper function, before their "late" suspend callbacks run (and analogously during resume). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-12-17x86, sparseirq: move irq_desc according to smp_affinity, v7Yinghai Lu
Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes if CONFIG_NUMA_MIGRATE_IRQ_DESC is set: - make irq_desc to go with affinity aka irq_desc moving etc - call move_irq_desc in irq_complete_move() - legacy irq_desc is not moved, because they are allocated via static array for logical apic mode, need to add move_desc_in_progress_in_same_domain, otherwise it will not be moved ==> also could need two phases to get irq_desc moved. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-02-11[PATCH] sort the devres mess outAl Viro
* Split the implementation-agnostic stuff in separate files. * Make sure that targets using non-default request_irq() pull kernel/irq/devres.o * Introduce new symbols (HAS_IOPORT and HAS_IOMEM) defaulting to positive; allow architectures to turn them off (we needed these symbols anyway for dependencies of quite a few drivers). * protect the ioport-related parts of lib/devres.o with CONFIG_HAS_IOPORT. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-06-29[PATCH] genirq: add irq-chip supportThomas Gleixner
Enable platforms to use the irq-chip and irq-flow abstractions: allow setting of the chip, the type and provide highlevel handlers for common irq-flows. [rostedt@goodmis.org: misroute-irq: Don't call desc->chip->end because of edge interrupts] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29[PATCH] genirq: add genirq sw IRQ-retriggerThomas Gleixner
Enable platforms that do not have a hardware-assisted hardirq-resend mechanism to resend them via a softirq-driven IRQ emulation mechanism. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] build kernel/irq/migration.c only if CONFIG_GENERIC_PENDING_IRQ is setChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] irq: uninline migration functionsAndrew Morton
Uninline some massive IRQ migration functions. Put them in the new kernel/irq/migration.c. Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!