aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2014-07-19Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "The locking department delivers: - A rather large and intrusive bundle of fixes to address serious performance regressions introduced by the new rwsem / mcs technology. Simpler solutions have been discussed, but they would have been ugly bandaids with more risk than doing the right thing. - Make the rwsem spin on owner technology opt-in for architectures and enable it only on the known to work ones. - A few fixes to the lockdep userspace library" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER locking/mutex: Disable optimistic spinning on some architectures locking/rwsem: Reduce the size of struct rw_semaphore locking/rwsem: Rename 'activity' to 'count' locking/spinlocks/mcs: Micro-optimize osq_unlock() locking/spinlocks/mcs: Introduce and use init macro and function for osq locks locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node() locking/rwsem: Allow conservative optimistic spinning when readers have lock tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire tools/liblockdep: Remove debug print left over from development tools/liblockdep: Fix comparison of a boolean value with a value of 2
2014-07-18Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A smaller set of fixes this week, and all regression fixes: - a handful of issues fixed on at91 with common clock conversion - a set of fixes for Marvell mvebu (SMP, coherency, PM) - a clock fix for i.MX6Q. - ... and a SMP/hotplug fix for Exynos" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: Fix core ID used by platsmp and hotplug code ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock ARM: clk-imx6q: parent lvds_sel input from upstream clock gates ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian
2014-07-18ARM: EXYNOS: Fix core ID used by platsmp and hotplug codeTomasz Figa
When CPU topology is specified in device tree, cpu_logical_map() does not return core ID anymore, but rather full MPIDR value. This breaks existing calculation of PMU register offsets on Exynos SoCs. This patch fixes the problem by adjusting the code to use only core ID bits of the value returned by cpu_logical_map() to allow CPU topology to be specified in device tree on Exynos SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'imx-fixes-3.16-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.16, 2nd take" from Shawn Guo: The i.MX fixes for 3.16, 2nd take: It fixes a hard machine hang regression for boards where only pcie is active but no sata, as the latest imx6-pcie driver is no longer enabling the upstream clock directly but only lvds clk out. * tag 'imx-fixes-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: clk-imx6q: parent lvds_sel input from upstream clock gates Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
Merge "at91: fixes for 3.16 #2" from Nicolas Ferre: Second AT91 fixes series for 3.16 - fix clock definitions after the move to CCF for: * at91sam9n12 (ohci) * at91sam9x5 (ohci, pwm) * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
Merge "mvebu fixes for v3.16 (round 3)" from Jason Cooper: - Fix SMP boot on 38x/375 in big endian - Fix operand list for pmsu on 370/XP - Fix coherency bus notifiers * tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsiBoris BREZILLON
The pwm driver requires a clocks property referencing the pwm peripheral clk. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsiBoris BREZILLON
udphs_clk (USB Device Controller clock) is referenced instead of uhphs_clk (USB Host Controller clock). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: at91: at91sam9x5: correct typo error for ohci clockBo Shen
Correct the typo error for the second "uhphs_clk". Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: clk-imx6q: parent lvds_sel input from upstream clock gatesLucas Stach
The i.MX6 reference manual doesn't make a clear distinction between the fixed clock divider and the enable gate for the pcie and sata reference clocks. This lead to the lvds mux inputs in the imx6q clk driver to be parented from the ref clock (which is the divider) instead of the actual gate, which in turn prevents the upstream clock to actually be enabled when lvds clk out is active. This fixes a hard machine hang regression in kernel 3.16 for boards where only pcie is active but no sata, as with this kernel version the imx6-pcie driver is no longer enabling the upstream clock directly but only lvds clk out. Reported-by: Arne Ruhnau <arne.ruhnau@target-sg.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Arne Ruhnau <arne.ruhnau@target-sg.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-16Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A cpufreq lockup fix and a compiler warning fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix compiler warnings x86, tsc: Fix cpufreq lockup
2014-07-16locking/mutex: Disable optimistic spinning on some architecturesPeter Zijlstra
The optimistic spin code assumes regular stores and cmpxchg() play nice; this is found to not be true for at least: parisc, sparc32, tile32, metag-lock1, arc-!llsc and hexagon. There is further wreckage, but this in particular seemed easy to trigger, so blacklist this. Opt in for known good archs. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jason Low <jason.low2@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: John David Anglin <dave.anglin@bell.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: stable@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - Another set of OMAP fixes * Clock fixes * Restart handling * PHY regulators * SATA hwmod data for DRA7 + Some trivial fixes and removal of a bit of dead code - Exynos fixes * A bunch of clock fixes * Some SMP fixes * Exynos multi-core timer: register as clocksource and fix ftrace. + a few other minor fixes There's also a couple more patches, and at91 fix for USB caused by common clock conversion, and more MAINTAINERS entries for shmobile. We're definitely switching to only regression fixes from here on out, we've been a little less strict than usual up until now" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: at91: at91sam9x5: add clocks for usb device ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: OMAP2+: Remove non working OMAP HDMI audio initialization ARM: imx: fix shared gate clock ARM: dts: Update the parent for Audss clocks in Exynos5420 ARM: EXYNOS: Update secondary boot addr for secure mode ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio ARM: dts: am335x-evm: Enable the McASP FIFO for audio ARM: OMAP2+: Make GPMC skip disabled devices ARM: OMAP2+: create dsp device only on OMAP3 SoCs ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on ARM: DRA7/AM43XX: fix header definition for omap44xx_restart ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss ARM: DRA7: hwmod: Fixup SATA hwmod ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver ...
2014-07-13Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another round of fixes for ARM: - a set of kprobes fixes from Jon Medhurst - fix the revision checking for the L2 cache which wasn't noticed to have been broken" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: l2c: fix revision checking ARM: kprobes: Fix test code compilation errors for ARMv4 targets ARM: kprobes: Disallow instructions with PC and register specified shift ARM: kprobes: Prevent known test failures stopping other tests running
2014-07-12Merge tag 'samsung-fixes-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes-3 for 3.16" from Kukjin Kim: Samsung fixes-3 for v3.16 - update the parent for Auudss clock because kernel will be hang during late boot if the parent clock is disabled in bootloader. - enable clk handing in power domain because while power domain on/off, its regarding clock source will be reset and it causes a problem so need to handle it. - add mux clocks to be used by power domain for exynos5420-mfc during power domain on/off and property in device tree also. - register cpuidle only for exynos4210 and exynos5250 because a system failure will be happened on other exynos SoCs. * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 ARM: dts: Add clock property for mfc_pd in exynos5420 clk: exynos5420: Add IDs for clocks used in PD mfc ARM: EXYNOS: Add support for clock handling in power domain ARM: dts: Update the parent for Audss clocks in Exynos5420 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12ARM: at91: at91sam9x5: add clocks for usb deviceBo Shen
Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12Merge branch 'kprobes-test-fixes' of git://git.linaro.org/people/tixy/kernel ↵Russell King
into fixes
2014-07-11ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250Tomasz Figa
Currently, the exynos cpuidle driver works correctly only on exynos4210 and 5250. Trying to use it with just one CPU online on any other exynos SoCs will lead to system failure, due to unsupported AFTR mode on other SoCs. This patch fixes the problem by registering the driver only on supported SoCs and letting others simply use default WFI mode until support for them is added. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-11ARM: dts: Add clock property for mfc_pd in exynos5420Arun Kumar K
Adding the optional clock property for the mfc_pd for handling the re-parenting while pd on/off. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-11ARM: EXYNOS: Add support for clock handling in power domainPrathyush K
While powering on/off a local powerdomain in exynos5 chipsets, the input clocks to each device gets modified. This behaviour is based on the SYSCLK_SYS_PWR_REG registers. E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC (aclk333) gets modified to oscclk = 0x1, no change in clocks. The recommended value of SYSCLK_SYS_PWR_REG before power gating any domain is 0x0. So we must also restore the clocks while powering on a domain everytime. This patch adds the framework for getting the required mux and parent clocks through a power domain device node. With this patch, while powering off a domain, parent is set to oscclk and while powering back on, its re-set to the correct parent which is as per the recommended pd on/off sequence. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-10Merge tag 'omap-for-v3.16/fixes-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.16-rc4" from Tony Lindgren: Fixes for omaps for the -rc series. It's mostly fixes for clock rates, restart handling and phy regulators and SATA interconnect data. Also few build fixes related to the DSP driver in staging, and trivial stuff like removal of broken and soon to be unused platform data init for HDMI audio that would be good to get into the -rc series if not too late. * tag 'omap-for-v3.16/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove non working OMAP HDMI audio initialization ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA. ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio ARM: dts: am335x-evm: Enable the McASP FIFO for audio ARM: OMAP2+: Make GPMC skip disabled devices ARM: OMAP2+: create dsp device only on OMAP3 SoCs ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on ARM: DRA7/AM43XX: fix header definition for omap44xx_restart ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss ARM: DRA7: hwmod: Fixup SATA hwmod ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-08ARM: mvebu: Fix coherency bus notifiers by using separate notifiersEzequiel Garcia
Currently, the coherency fabric support registers two bus notifiers; one for platform, one for pci bus types, with the same notifier block. However, this is illegal and can cause serious issues: the notifier block is also a link in the notifier list and cannot be inserted twice. This commit fixes this by using different notifier blocks (with the same notifier callback) to set the platform and pci bus types notifiers. Fixes: b0063aad5dd8 ("ARM: mvebu: use hardware I/O coherency also for PCI devices") Reported-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1404826657-6977-1-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08ARM: mvebu: Fix the operand list in the inline asm of ↵Gregory CLEMENT
armada_370_xp_pmsu_idle_enter In the inline asm part of the function armada_370_xp_pmsu_idle_enter() the input operand was used. The intent here was to let the compiler choose this register so it could do the optimization it needed. However an input operand is not supposed to be modified by the inline asm code. This can lead to improper generated instructions. In some case generated instruction the compiler made the choice to reuse the same register to store the return value. But in the assembly part this register was modified, so it can lead to return an wrong value. The fix is to use a clobber. Thanks to this the compiler will know that the value of this register will be modified. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404483736-16938-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08ARM: OMAP2+: Remove non working OMAP HDMI audio initializationJyri Sarha
This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-08Merge tag 'for-v3.16-rc/omap-fixes-b' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.16/fixes Some miscellaneous fixes for OMAP clock code, DRA7xx device data, and PRCM code (when DSPBridge is used) for v3.16-rc. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/prcm-a-v3.16-rc/20140706174258/
2014-07-07ARM: imx: fix shared gate clockShawn Guo
Let's say clock A and B are two gate clocks that share the same register bit in hardware. Therefore they are registered as shared gate clocks with imx_clk_gate2_shared(). In a scenario that only clock A is enabled by clk_enable(A) while B is not used, the shared gate will be unexpectedly disabled in hardware. It happens because clk_enable(A) increments the share_count from 0 to 1, while clock B is unused to clock core, and therefore the core function will just disable B by calling clk->ops->disable() directly. The consequence of that call is share_count is decremented to 0 and the gate is disabled in hardware, even though clock A is still in use. The patch fixes the issue by initializing the share_count per hardware state and returns enable state per share_count from .is_enabled() hook, in case it's a shared gate. While at it, add a check in clk_gate2_disable() to ensure it's never called with a zero share_count. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Fixes: f9f28cdf2167 ("ARM: imx: add shared gate clock support") Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07Merge tag 'samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes-2 for v3.16" from Kukjin Kim: - fix the check for SMP configuration with using CONFIG_SMP not just SMP - fix the number of pwm-cells for exynos4 pwm - fix ftrace for exynos_mct - register exynos_mct for stable udely - fix secondary boot addr for secure mode for exynos SoCs * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Update secondary boot addr for secure mode clocksource: exynos_mct: Register the timer for stable udelay clocksource: exynos_mct: Fix ftrace ARM: dts: fix pwm-cells in pwm node for exynos4 ARM: EXYNOS: Fix the check for non-smp configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-08ARM: dts: Update the parent for Audss clocks in Exynos5420Tushar Behera
Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux. As per the user manual, it should be CLK_MAU_EPLL. The problem surfaced when the bootloader in Peach-pit board set the EPLL clock as the parent of AUDSS mux. While booting the kernel, we used to get a system hang during late boot if CLK_MAU_EPLL was disabled. Signed-off-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Reported-by: Kevin Hilman <khilman@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-08ARM: EXYNOS: Update secondary boot addr for secure modeSachin Kamat
Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Tested-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-07ARM: l2c: fix revision checkingRussell King
The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-07Merge branch 'for-v3.16-rc/clk-dt-fixes' of ↵Tony Lindgren
https://github.com/t-kristo/linux-pm into fixes-rc4
2014-07-07ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.Enric Balletbo i Serra
As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: dts: am335x-evmsk: Enable the McASP FIFO for audioPeter Ujfalusi
The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: dts: am335x-evm: Enable the McASP FIFO for audioPeter Ujfalusi
The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: OMAP2+: Make GPMC skip disabled devicesGuido Martínez
Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: OMAP2+: create dsp device only on OMAP3 SoCsSuman Anna
The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always onRoger Quadros
After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak <rnayak@ti.com> CC: Tero Kristo <t-kristo@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: DRA7/AM43XX: fix header definition for omap44xx_restartNishanth Menon
omap44xx_restart is defined as a static void inline when DRA7/AM437X is defined alone, which implies that the restart function is no longer functional even though it is built in. So, fix the definition of the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-06ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflowTero Kristo
The divider value provided to the _dpll_test_fint can reach value of 256 with J type DPLLs (USB etc.), which causes an overflow with the u8 datatype. Fix this by changing the parameter to be an int instead. Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: changed type of 'n' to unsigned int] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-07-06ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ssRoger Quadros
Add the sysconfig class bits for the Super Speed USB controllers Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-07-06ARM: DRA7: hwmod: Fixup SATA hwmodRoger Quadros
Get rid of optional clock as that is now managed by the AHCI platform driver. Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..) is passed as the second memory resource in the device tree. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-07-06ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driverSuman Anna
The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed some of the macros used by the TI DSP/Bridge driver. This fixes the following build errors when trying to build DSP/Bridge driver (disabled at present), otherwise results in the following build errors: drivers/staging/tidspbridge/core/tiomap3430.c:531:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430.c:531:31: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/staging/tidspbridge/core/tiomap_io.c: In function 'sm_interrupt_dsp': drivers/staging/tidspbridge/core/tiomap_io.c:404:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:404:31: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap_io.c:414:12: error: 'OMAP3430_IVA2_DPLL_FREQSEL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:415:12: error: 'OMAP3430_EN_IVA2_DPLL_SHIFT' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap_io.o] Error 1 drivers/staging/tidspbridge/core/tiomap3430_pwr.c: In function 'dsp_clk_wakeup_event_ctrl': drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: error: 'OMAP3430_GRPSEL_GPT5_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap3430_pwr.c:455:19: error: 'OMAP3430_GRPSEL_GPT6_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:468:19: error: 'OMAP3430_GRPSEL_GPT7_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:481:19: error: 'OMAP3430_GRPSEL_GPT8_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:494:19: error: 'OMAP3430_GRPSEL_MCBSP1_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:546:19: error: 'OMAP3430_GRPSEL_MCBSP5_MASK' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430_pwr.o] Error 1 make[2]: *** [drivers/staging/tidspbridge] Error 2 Fixes: 7be914f (ARM: OMAP3: PRM/CM: Cleanup unused header) Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-07-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - A set of of OMAP patches that we had missed Tony's pull request of: * Reset fix for am43xx * Proper OPP table for omap5 * Fix for SoC detection of one of the DRA7 SoCs * hwmod updates to get SATA and OCP to work on omap5 (drivers merged in 3.16) * ... plus a handful of smaller fixes - sunxi needed to re-add machine specific restart code that was removed in anticipation of a watchdog driver being merged for 3.16, and it didn't make it in. - Marvell fixes for PCIe on SMP and a big-endian fix. - A trivial defconfig update to make my capri test board boot with bcm_defconfig again. ... and a couple of MAINTAINERS updates, one to claim new Keystone drivers that have been merged, and one to merge MXS and i.MX (both Freescale platforms). The largest diffs come from the hwmod code for omap5 and the re-add of the restart code on sunxi. The hwmod stuff is quite late at this point but it slipped through cracks repeatedly while coming up the maintainer chain and only affects the one SoC so risk is low" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add few more Keystone drivers MAINTAINERS: merge MXS entry into IMX one ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk ARM: bcm: Fix bcm and multi_v7 defconfigs ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-07-04Merge tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for v3.16 (round #2) - mvebu - Fix PCIe deadlock now that SMP is enabled - Fix cpuidle for big-endian systems * tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-04ARM: sunxi: Reintroduce the restart code for A10/A20 SoCsMaxime Ripard
This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-04Merge tag 'omap-for-v3.16/fixes-against-rc1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge OMAP fixes from Tony Lindgren: Fixes for omaps for issues discovered during the merge window and enabling of a few features that had to wait for the driver dependencies to clear. The fixes included are: - Fix am43xx hard reset flags - Fix SoC detection for DRA722 - Fix CPU OPP table for omap5 - Fix legacy mux parser bug if requested muxname is a prefix of multiple mux entries - Fix qspi interrupt binding that relies on the irq crossbar that has not yet been enabled - Add missing phy_sel for am43x-epos-evm - Drop unused gic_init_irq() that is no longer needed And the enabling of features that had driver dependencies are: - Change dra7 to use Audio Tracking Logic clock instead of a fixed clock now that the clock driver for it has been merged - Enable off idle configuration for selected omaps as all the kernel dependencies for device tree based booting are finally merged as this is needed to get the automated PM tests working finally with device tree based booting - Add hwmod entry for ocp2scp3 for omap5 to get sata working as all the driver dependencies are now in the kernel and this patch fell through the cracks during the merge window * tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
2014-07-05ARM: dts: fix pwm-cells in pwm node for exynos4Jaewon Kim
pwm-cells should be 3. Third cell is optional PWM flags. And This flag supported by this binding is PWM_POLARITY_INVERTED. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05ARM: EXYNOS: Fix the check for non-smp configurationAbhilash Kesavan
Commit 1754c42e3db5("ARM: exynos: move sysram info to exynos.c") missed out the CONFIG_ prefix causing exynos_sysram_init() to get called twice for SMP configurations. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@samsug.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-03ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock ratesRajendra Nayak
Without the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 532000000 With the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 266000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 133000000 The l3 clock derived from core DPLL is actually a divider clock, with the default divider set to 2. l4 then derived from l3 is a fixed factor clock, but the fixed divider is 2 and not 1. Which means the l3 clock is half of core DPLLs h12x2 and l4 is half of l3 (as seen with this patch) Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-07-02ARM: kprobes: Fix test code compilation errors for ARMv4 targetsJon Medhurst
Conditionally compile kprobes test cases for ARMv5 instructions to avoid compilation errors with ARMv4 targets like: /tmp/cc7Tx8ST.s:16740: Error: selected processor does not support ARM mode `clz r0,r0' Signed-off-by: Jon Medhurst <tixy@linaro.org>