aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-14net: hns: Fix object reference leaks in hns_dsaf_roce_reset()Huang Zijiang
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocsJann Horn
The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum number of references that we might need to create in the fastpath later, the bump-allocation fastpath only has to modify the non-atomic bias value that tracks the number of extra references we hold instead of the atomic refcount. The maximum number of allocations we can serve (under the assumption that no allocation is made with size 0) is nc->size, so that's the bias used. However, even when all memory in the allocation has been given away, a reference to the page is still held; and in the `offset < 0` slowpath, the page may be reused if everyone else has dropped their references. This means that the necessary number of references is actually `nc->size+1`. Luckily, from a quick grep, it looks like the only path that can call page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which requires CAP_NET_ADMIN in the init namespace and is only intended to be used for kernel testing and fuzzing. To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the `offset < 0` path, below the virt_to_page() call, and then repeatedly call writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI, with a vector consisting of 15 elements containing 1 byte each. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14Merge branch 'net-phy-fix-locking-issue'David S. Miller
Heiner Kallweit says: ==================== net: phy: fix locking issue Russell pointed out that the locking used in phy_is_started() isn't needed and misleading. This locking also contributes to a race fixed with patch 2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: phy: fix potential race in the phylib state machineHeiner Kallweit
Russell reported the following race in the phylib state machine (quoting from his mail): if (phy_polling_mode(phydev) && phy_is_started(phydev)) phy_queue_state_machine(phydev, PHY_STATE_TIME); state = PHY_UP thread 0 thread 1 phy_disconnect() +-phy_is_started() phy_is_started() | `-phy_stop() +-phydev->state = PHY_HALTED `-phy_stop_machine() `-cancel_delayed_work_sync() phy_queue_state_machine() `-mod_delayed_work() At this point, the phydev->state_queue() has been added back onto the system workqueue despite phy_stop_machine() having been called and cancel_delayed_work_sync() called on it. Fix this by protecting the complete operation in thread 0. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: phy: don't use locking in phy_is_startedHeiner Kallweit
Russell suggested to remove the locking from phy_is_started() because the read is atomic anyway and actually the locking may be more misleading. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Suggested-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14selftests: fix timestamping MakefileDeepa Dinamani
The clean target in the makefile conflicts with the generic kselftests lib.mk, and fails to properly remove the compiled test programs. Remove the redundant rule, the TEST_GEN_FILES will be already removed by the CLEAN macro in lib.mk. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14kvm: vmx: Fix entry number check for add_atomic_switch_msr()Xiaoyao Li
Commit ca83b4a7f2d068da79a0 ("x86/KVM/VMX: Add find_msr() helper function") introduces the helper function find_msr(), which returns -ENOENT when not find the msr in vmx->msr_autoload.guest/host. Correct checking contion of no more available entry in vmx->msr_autoload. Fixes: ca83b4a7f2d0 ("x86/KVM/VMX: Add find_msr() helper function") Cc: stable@vger.kernel.org Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-14KVM: x86: Recompute PID.ON when clearing PID.SNLuwei Kang
Some Posted-Interrupts from passthrough devices may be lost or overwritten when the vCPU is in runnable state. The SN (Suppress Notification) of PID (Posted Interrupt Descriptor) will be set when the vCPU is preempted (vCPU in KVM_MP_STATE_RUNNABLE state but not running on physical CPU). If a posted interrupt comes at this time, the irq remapping facility will set the bit of PIR (Posted Interrupt Requests) but not ON (Outstanding Notification). Then, the interrupt will not be seen by KVM, which always expects PID.ON=1 if PID.PIR=1 as documented in the Intel processor SDM but not in the VT-d specification. To fix this, restore the invariant after PID.SN is cleared. Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-14x86/CPU: Add Icelake model numberRajneesh Bhardwaj
Add the CPUID model number of Icelake (ICL) mobile processors to the Intel family list. Icelake U/Y series uses model number 0x7E. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David E. Box" <david.e.box@intel.com> Cc: dvhart@infradead.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190214115712.19642-2-rajneesh.bhardwaj@linux.intel.com
2019-02-13net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend()Dan Carpenter
The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: fix possible overflow in __sk_mem_raise_allocated()Eric Dumazet
With many active TCP sockets, fat TCP sockets could fool __sk_mem_raise_allocated() thanks to an overflow. They would increase their share of the memory, instead of decreasing it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exitJohn David Anglin
The GPIO interrupt controller on the espressobin board only supports edge interrupts. If one enables the use of hardware interrupts in the device tree for the 88E6341, it is possible to miss an edge. When this happens, the INTn pin on the Marvell switch is stuck low and no further interrupts occur. I found after adding debug statements to mv88e6xxx_g1_irq_thread_work() that there is a race in handling device interrupts (e.g. PHY link interrupts). Some interrupts are directly cleared by reading the Global 1 status register. However, the device interrupt flag, for example, is not cleared until all the unmasked SERDES and PHY ports are serviced. This is done by reading the relevant SERDES and PHY status register. The code only services interrupts whose status bit is set at the time of reading its status register. If an interrupt event occurs after its status is read and before all interrupts are serviced, then this event will not be serviced and the INTn output pin will remain low. This is not a problem with polling or level interrupts since the handler will be called again to process the event. However, it's a big problem when using level interrupts. The fix presented here is to add a loop around the code servicing switch interrupts. If any pending interrupts remain after the current set has been handled, we loop and process the new set. If there are no pending interrupts after servicing, we are sure that INTn has gone high and we will get an edge when a new event occurs. Tested on espressobin board. Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: fix interrupt handling in non-started statesHeiner Kallweit
phylib enables interrupts before phy_start() has been called, and if we receive an interrupt in a non-started state, the interrupt handler returns IRQ_NONE. This causes problems with at least one Marvell chip as reported by Andrew. Fix this by handling interrupts the same as in phy_mac_interrupt(), basically always running the phylib state machine. It knows when it has to do something and when not. This change allows to handle interrupts gracefully even if they occur in a non-started state. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrateXin Long
In sctp_stream_init(), after sctp_stream_outq_migrate() freed the surplus streams' ext, but sctp_stream_alloc_out() returns -ENOMEM, stream->outcnt will not be set to 'outcnt'. With the bigger value on stream->outcnt, when closing the assoc and freeing its streams, the ext of those surplus streams will be freed again since those stream exts were not set to NULL after freeing in sctp_stream_outq_migrate(). Then the invalid-free issue reported by syzbot would be triggered. We fix it by simply setting them to NULL after freeing. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+58e480e7b28f2d890bfd@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13sctp: call gso_reset_checksum when computing checksum in sctp_gso_segmentXin Long
Jianlin reported a panic when running sctp gso over gre over vlan device: [ 84.772930] RIP: 0010:do_csum+0x6d/0x170 [ 84.790605] Call Trace: [ 84.791054] csum_partial+0xd/0x20 [ 84.791657] gre_gso_segment+0x2c3/0x390 [ 84.792364] inet_gso_segment+0x161/0x3e0 [ 84.793071] skb_mac_gso_segment+0xb8/0x120 [ 84.793846] __skb_gso_segment+0x7e/0x180 [ 84.794581] validate_xmit_skb+0x141/0x2e0 [ 84.795297] __dev_queue_xmit+0x258/0x8f0 [ 84.795949] ? eth_header+0x26/0xc0 [ 84.796581] ip_finish_output2+0x196/0x430 [ 84.797295] ? skb_gso_validate_network_len+0x11/0x80 [ 84.798183] ? ip_finish_output+0x169/0x270 [ 84.798875] ip_output+0x6c/0xe0 [ 84.799413] ? ip_append_data.part.50+0xc0/0xc0 [ 84.800145] iptunnel_xmit+0x144/0x1c0 [ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel] [ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre] [ 84.802395] dev_hard_start_xmit+0xa5/0x210 [ 84.803086] sch_direct_xmit+0x14f/0x340 [ 84.803733] __dev_queue_xmit+0x799/0x8f0 [ 84.804472] ip_finish_output2+0x2e0/0x430 [ 84.805255] ? skb_gso_validate_network_len+0x11/0x80 [ 84.806154] ip_output+0x6c/0xe0 [ 84.806721] ? ip_append_data.part.50+0xc0/0xc0 [ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp] [ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp] It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment(). For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start. So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for net: 1) Missing structure initialization in ebtables causes splat with 32-bit user level on a 64-bit kernel, from Francesco Ruggeri. 2) Missing dependency on nf_defrag in IPVS IPv6 codebase, from Andrea Claudi. 3) Fix possible use-after-free from release path of target extensions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge tag 'mlx5-fixes-2019-02-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-02-13 This series introduces some fixes to mlx5 driver. For more information please see tag log below. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net/mlx5e: XDP, fix redirect resources availability checkSaeed Mahameed
Currently mlx5 driver creates xdp redirect hw queues unconditionally on netdevice open, This is great until someone starts redirecting XDP traffic via ndo_xdp_xmit on mlx5 device and changes the device configuration at the same time, this might cause crashes, since the other device's napi is not aware of the mlx5 state change (resources un-availability). To fix this we must synchronize with other devices napi's on the system. Added a new flag under mlx5e_priv to determine XDP TX resources are available, set/clear it up when necessary and use synchronize_rcu() when the flag is turned off, so other napi's are in-sync with it, before we actually cleanup the hw resources. The flag is tested prior to committing to transmit on mlx5e_xdp_xmit, and it is sufficient to determine if it safe to transmit or not. The other two internal flags (MLX5E_STATE_OPENED and MLX5E_SQ_STATE_ENABLED) become unnecessary. Thus, they are removed from data path. Fixes: 58b99ee3e3eb ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Reported-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-13net/mlx5: Fix a compilation warning in events.cTariq Toukan
Eliminate the following compilation warning: drivers/net/ethernet/mellanox/mlx5/core/events.c: warning: 'error_str' may be used uninitialized in this function [-Wuninitialized]: => 238:3 Fixes: c2fb3db22d35 ("net/mlx5: Rework handling of port module events") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-13net/mlx5: No command allowed when command interface is not readyHuy Nguyen
When EEH is injected and PCI bus stalls, mlx5's pci error detect function is called to deactivate the command interface and tear down the device. The issue is that there can be a thread that already passed MLX5_DEVICE_STATE_INTERNAL_ERROR check, it will send the command and stuck in the wait_func. Solution: Add function mlx5_cmd_flush to disable command interface and clear all the pending commands. When device state is set to MLX5_DEVICE_STATE_INTERNAL_ERROR, call mlx5_cmd_flush to ensure all pending threads waiting for firmware commands completion are terminated. Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-13net/mlx5e: Fix NULL pointer derefernce in set channels error flowMaria Pasechnik
New channels are applied to the priv channels only after they are successfully opened. Then, the indirection table should be built according to the new number of channels. Currently, such build is preformed independently of whether the channels opening is successful, and is not reverted on failure. The bug is caused due to removal of rss params from channels struct and moving it to priv struct. That change cause to independency between channels and rss params. This causes a crash on a later point, when accessing rqn of a non existing channel. This patch fixes it by moving the indirection table build right before switching the priv channels to new channels struct, after the new set of channels was successfully opened. Fixes: bbeb53b8b2c9 ("net/mlx5e: Move RSS params to a dedicated struct") Signed-off-by: Maria Pasechnik <mariap@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-13Merge tag 'kvm-arm-fixes-for-5.0' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for 5.0: - Fix the way we reset vcpus, plugging the race that could happen on VHE - Fix potentially inconsistent group setting for private interrupts - Don't generate UNDEF when LORegion feature is present - Relax the restriction on using stage2 PUD huge mapping - Turn some spinlocks into raw_spinlocks to help RT compliance
2019-02-13KVM: nVMX: Restore a preemption timer consistency checkSean Christopherson
A recently added preemption timer consistency check was unintentionally dropped when the consistency checks were being reorganized to match the SDM's ordering. Fixes: 461b4ba4c7ad ("KVM: nVMX: Move the checks for VM-Execution Control Fields to a separate helper function") Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-13Merge tag 'trace-v5.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "This fixes kprobes/uprobes dynamic processing of strings, where it processes the args but does not update the remaining length of the buffer that the string arguments will be placed in. It constantly passes in the total size of buffer used instead of passing in the remaining size of the buffer used. This could cause issues if the strings are larger than the max size of an event which could cause the strings to be written beyond what was reserved on the buffer" * tag 'trace-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: probeevent: Correctly update remaining space in dynamic area
2019-02-13netfilter: nft_compat: use-after-free when deleting targetsPablo Neira Ayuso
Fetch pointer to module before target object is released. Fixes: 29e3880109e3 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions") Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-13drm/amdgpu/psp11: TA firmware is optional (v3)Alex Deucher
Don't warn or fail if it's missing. v2: handle xgmi case more gracefully. v3: handle older kernels properly Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-13Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull single NVMe fix from Christoph * 'nvme-5.0' of git://git.infradead.org/nvme: nvme-pci: add missing unlock for reset error
2019-02-13signal: Restore the stop PTRACE_EVENT_EXITEric W. Biederman
In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-13x86/a.out: Clear the dump structure initiallyBorislav Petkov
dump_thread32() in aout_core_dump() does not clear the user32 structure allocated on the stack as the first thing on function entry. As a result, the dump.u_comm, dump.u_ar0 and dump.signal which get assigned before the clearing, get overwritten. Rename that function to fill_dump() to make it clear what it does and call it first thing. This was caught while staring at a patch by Derek Robson <robsonde@gmail.com>. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Derek Robson <robsonde@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Matz <matz@suse.de> Cc: x86@kernel.org Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190202005512.3144-1-robsonde@gmail.com
2019-02-13mmc: meson-gx: fix interrupt nameMartin Blumenstingl
Commit bb364890323cca ("mmc: meson-gx: Free irq in release() callback") changed the _probe code to use request_threaded_irq() instead of devm_request_threaded_irq(). Unfortunately this removes a fallback for the interrupt name: devm_request_threaded_irq() uses the device name as fallback if the given IRQ name is NULL. request_threaded_irq() has no such fallback, thus /proc/interrupts shows "(null)" instead. Explicitly pass the dev_name() so we get the IRQ name shown in /proc/interrupts again. While here, also fix the indentation of the request_threaded_irq() parameter list. Fixes: bb364890323cca ("mmc: meson-gx: Free irq in release() callback") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-13perf/core: Fix impossible ring-buffer sizes warningIngo Molnar
The following commit: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by: "Jin, Yao" <yao.jin@linux.intel.com> Bisected-by: Borislav Petkov <bp@alien8.de> Analyzed-by: Peter Zijlstra <peterz@infradead.org> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Fixes: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-12scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmdBill Kuzeja
In qla2x00_async_tm_cmd, we reference off sp after it has been freed. This caused a panic on a system running a slub debug kernel. Since fcport is passed in anyways, just use that instead. Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Giridhar Malavali <gmalavali@marvell.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-12scsi: sd: fix entropy gathering for most rotational disksJames Bottomley
The problem is that the default for MQ is not to gather entropy, whereas the default for the legacy queue was always to gather it. The original attempt to fix entropy gathering for rotational disks under MQ added an else branch in sd_read_block_characteristics(). Unfortunately, the entire check isn't reached if the device has no characteristics VPD page. Since this page was only introduced in SBC-3 and its optional anyway, most less expensive rotational disks don't have one, meaning they all stopped gathering entropy when we made MQ the default. In a wholly unrelated change, openssl and openssh won't function until the random number generator is initialised, meaning lots of people have been seeing large delays before they could log into systems with default MQ kernels due to this lack of entropy, because it now can take tens of minutes to initialise the kernel random number generator. The fix is to set the non-rotational and add-randomness flags unconditionally early on in the disk initialization path, so they can be reset only if the device actually reports being non-rotational via the VPD page. Reported-by: Mikael Pettersson <mikpelinux@gmail.com> Fixes: 83e32a591077 ("scsi: sd: Contribute to randomness when running rotational device") Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Xuewei Zhang <xueweiz@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-13Merge tag 'imx-drm-fixes-2019-02-12' of git://git.pengutronix.de/pza/linux ↵Dave Airlie
into drm-fixes drm/imx: plane, ldb, and ipu-v3 fixes - Fix CSI register offsets for i.MX51 and i.MX53. - Fix delayed page flip completion events on i.MX6QP due to unexpected behaviour of the PRE when issuing NOP buffer updates to the same buffer address. - Stop throwing errors for plane updates on disabled CRTCs when a userspace process is killed while a plane update is pending. - Add missing of_node_put cleanup in imx_ldb_bind. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1549990602.4800.11.camel@pengutronix.de
2019-02-13csky: Fixup dead loop in show_stackGuo Ren
When STACKTRACE is enabled, we must pass fp as stack for unwind, otherwise random value in stack will casue a dead loop. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Lu Baoquan <lu.baoquan@intellif.com>
2019-02-13csky: Fixup io-range page attribute for mmap("/dev/mem")Guo Ren
Some user space drivers need accessing IO address and IO remap need SO(strong order) page-attribute to make IO operation correct. So we need add SO-page-attr for all non-memory address. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Fan Xiaodong <xiaodong.fan@boyahualu.com>
2019-02-13csky: coding convention: Use task_stack_pageGuo Ren
Use task_stack_page instead of p->stack to get stack. Follow the coding convention style. Also for init_stack, the same with other archs. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-02-13csky: Fixup wrong pt_regs sizeGuo Ren
The bug is from commit 2054f4af1957 ("csky: bugfix gdb coredump error.") We change the ELF_NGREG to ELF_NGREG - 2 to fit gdb&gcc define, but forgot modify ptrace regset. Now coredump use ELF_NRGEG to parse GPRs and ptrace use pt_regs_regset, so there are two different reg_sets for userspace. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-02-13csky: Fixup _PAGE_GLOBAL bit for 610 tlb entryGuo Ren
C-SKY CPU 8xx's _PAGE_GLOBAL is BIT(0), but 610's _PAGE_GLOBAL is BIT(6). Use _PAGE_GLOBAL macro instead of bad magic number. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-02-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: proc: smaps_rollup: fix pss_locked calculation Rename include/{uapi => }/asm-generic/shmparam.h really Revert "mm: use early_pfn_to_nid in page_ext_init" mm/gup: fix gup_pmd_range() for dax Revert "mm: slowly shrink slabs with a relatively small number of objects" Revert "mm: don't reclaim inodes with many attached pages"
2019-02-12mm: proc: smaps_rollup: fix pss_locked calculationSandeep Patil
The 'pss_locked' field of smaps_rollup was being calculated incorrectly. It accumulated the current pss everytime a locked VMA was found. Fix that by adding to 'pss_locked' the same time as that of 'pss' if the vma being walked is locked. Link: http://lkml.kernel.org/r/20190203065425.14650-1-sspatil@android.com Fixes: 493b0e9d945f ("mm: add /proc/pid/smaps_rollup") Signed-off-by: Sandeep Patil <sspatil@android.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Colascione <dancol@google.com> Cc: <stable@vger.kernel.org> [4.14.x, 4.19.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-12Rename include/{uapi => }/asm-generic/shmparam.h reallyMasahiro Yamada
Commit 36c0f7f0f899 ("arch: unexport asm/shmparam.h for all architectures") is different from the patch I submitted. My patch is this: https://lore.kernel.org/lkml/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com/T/#u The file renaming part: rename include/{uapi => }/asm-generic/shmparam.h (100%) was lost when it was picked up. I think it was an accident because Andrew did not say anything. Link: http://lkml.kernel.org/r/1549158277-24558-1-git-send-email-yamada.masahiro@socionext.com Fixes: 36c0f7f0f899 ("arch: unexport asm/shmparam.h for all architectures") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-12Revert "mm: use early_pfn_to_nid in page_ext_init"Qian Cai
This reverts commit fe53ca54270a ("mm: use early_pfn_to_nid in page_ext_init"). When booting a system with "page_owner=on", start_kernel page_ext_init invoke_init_callbacks init_section_page_ext init_page_owner init_early_allocated_pages init_zones_in_node init_pages_in_zone lookup_page_ext page_to_nid The issue here is that page_to_nid() will not work since some page flags have no node information until later in page_alloc_init_late() due to DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds access with an invalid nid. UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50 index 7 is out of range for type 'zone [5]' Also, kernel will panic since flags were poisoned earlier with, CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_NODE_NOT_IN_PAGE_FLAGS=n start_kernel setup_arch pagetable_init paging_init sparse_init sparse_init_nid memblock_alloc_try_nid_raw It did not handle it well in init_pages_in_zone() which ends up calling page_to_nid(). page:ffffea0004200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) page_owner info is not active (free page?) kernel BUG at include/linux/mm.h:990! RIP: 0010:init_page_owner+0x486/0x520 This means that assumptions behind commit fe53ca54270a ("mm: use early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert the commit for now. A proper way to move the page_owner initialization to sooner is to hook into memmap initialization. Link: http://lkml.kernel.org/r/20190115202812.75820-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-12mm/gup: fix gup_pmd_range() for daxYu Zhao
For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Link: http://lkml.kernel.org/r/20190111034033.601-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Keith Busch <keith.busch@intel.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-12Revert "mm: slowly shrink slabs with a relatively small number of objects"Dave Chinner
This reverts commit 172b06c32b9497 ("mm: slowly shrink slabs with a relatively small number of objects"). This change changes the agressiveness of shrinker reclaim, causing small cache and low priority reclaim to greatly increase scanning pressure on small caches. As a result, light memory pressure has a disproportionate affect on small caches, and causes large caches to be reclaimed much faster than previously. As a result, it greatly perturbs the delicate balance of the VFS caches (dentry/inode vs file page cache) such that the inode/dentry caches are reclaimed much, much faster than the page cache and this drives us into several other caching imbalance related problems. As such, this is a bad change and needs to be reverted. [ Needs some massaging to retain the later seekless shrinker modifications.] Link: http://lkml.kernel.org/r/20190130041707.27750-3-david@fromorbit.com Fixes: 172b06c32b9497 ("mm: slowly shrink slabs with a relatively small number of objects") Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Wolfgang Walter <linux@stwm.de> Cc: Roman Gushchin <guro@fb.com> Cc: Spock <dairinin@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-12Revert "mm: don't reclaim inodes with many attached pages"Dave Chinner
This reverts commit a76cf1a474d7d ("mm: don't reclaim inodes with many attached pages"). This change causes serious changes to page cache and inode cache behaviour and balance, resulting in major performance regressions when combining worklaods such as large file copies and kernel compiles. https://bugzilla.kernel.org/show_bug.cgi?id=202441 This change is a hack to work around the problems introduced by changing how agressive shrinkers are on small caches in commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects"). It creates more problems than it solves, wasn't adequately reviewed or tested, so it needs to be reverted. Link: http://lkml.kernel.org/r/20190130041707.27750-2-david@fromorbit.com Fixes: a76cf1a474d7d ("mm: don't reclaim inodes with many attached pages") Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Wolfgang Walter <linux@stwm.de> Cc: Roman Gushchin <guro@fb.com> Cc: Spock <dairinin@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-12Merge tag 'hwmon-for-v5.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix fan detection for NCT6793D" * tag 'hwmon-for-v5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775) Fix fan6 detection for NCT6793D
2019-02-12Merge branch 'md-fixes' of https://github.com/liu-song-6/linux into for-linusJens Axboe
Pull MD fix from Song * 'md-fixes' of https://github.com/liu-song-6/linux: md/raid1: don't clear bitmap bits on interrupted recovery.
2019-02-12md/raid1: don't clear bitmap bits on interrupted recovery.Nate Dailey
sync_request_write no longer submits writes to a Faulty device. This has the unfortunate side effect that bitmap bits can be incorrectly cleared if a recovery is interrupted (previously, end_sync_write would have prevented this). This means the next recovery may not copy everything it should, potentially corrupting data. Add a function for doing the proper md_bitmap_end_sync, called from end_sync_write and the Faulty case in sync_request_write. backport note to 4.14: s/md_bitmap_end_sync/bitmap_end_sync Cc: stable@vger.kernel.org 4.14+ Fixes: 0c9d5b127f69 ("md/raid1: avoid reusing a resync bio after error handling.") Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Tested-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-02-12Merge tag 'riscv-for-linus-5.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a pair of bug fixes that I'd like to include in 5.0: - A fix to disambiguate swap from invalid PTEs, which fixes an error when trying to unmap PROT_NONE pages. - A revert to an optimization of the size of flat binaries. This is really a workaround to prevent breaking existing boot flows, but since the change was introduced as part of the 5.0 merge window I'd like to have the fix in before 5.0 so we can avoid a regression for any proper releases. With these I hope we're out of patches for 5.0 in RISC-V land" * tag 'riscv-for-linus-5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Revert "RISC-V: Make BSS section as the last section in vmlinux.lds.S" riscv: Add pte bit to distinguish swap from invalid