Diffstat (limited to 'Documentation/sound/oss/AudioExcelDSP16')
1 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
new file mode 100644
@@ -0,0 +1,101 @@
+Informations about Audio Excel DSP 16 driver can be found in the source
+Please, read the head of the source before using it. It contain useful
+The Audio Excel configuration, is now done with the standard Linux setup.
+You have to configure the sound card (Sound Blaster or Microsoft Sound System)
+and, if you want it, the Roland MPU-401 (do not use the Sound Blaster MPU-401,
+SB-MPU401) in the main driver menu. Activate the lowlevel drivers then select
+the Audio Excel hardware that you want to initialize. Check the IRQ/DMA/MIRQ
+of the Audio Excel initialization: it must be the same as the SBPRO (or MSS)
+setup. If the parameters are different, correct it.
+I you own a Gallant's audio card based on SC-6600, activate the SC-6600 support.
+If you want to change the configuration of the sound board, be sure to
+check off all the configuration items before re-configure it.
+To use this driver as a module, you must configure some module parameters, to
+set up I/O addresses, IRQ lines and DMA channels. Some parameters are
+mandatory while some others are optional. Here a list of parameters you can
+use with this module:
+io I/O base address (0x220 or 0x240)
+irq irq line (5, 7, 9, 10 or 11)
+dma dma channel (0, 1 or 3)
+mss_base I/O base address for activate MSS mode (default SBPRO)
+ (0x530 or 0xE80)
+mpu_base I/O base address for activate MPU-401 mode
+ (0x300, 0x310, 0x320 or 0x330)
+mpu_irq MPU-401 irq line (5, 7, 9, 10 or 0)
+The /etc/modprobe.conf will have lines like this:
+options opl3 io=0x388
+options ad1848 io=0x530 irq=11 dma=3
+options aedsp16 io=0x220 irq=11 dma=3 mss_base=0x530
+Where the aedsp16 options are the options for this driver while opl3 and
+ad1848 are the corresponding options for the MSS and OPL3 modules.
+Loading MSS and OPL3 needs to pre load the aedsp16 module to set up correctly
+the sound card. Installation dependencies must be written in the modprobe.conf
+install ad1848 /sbin/modprobe aedsp16 && /sbin/modprobe -i ad1848
+install opl3 /sbin/modprobe aedsp16 && /sbin/modprobe -i opl3
+Then you must load the sound modules stack in this order:
+sound -> aedsp16 -> [ ad1848, opl3 ]
+With the above configuration, loading ad1848 or opl3 modules, will
+automatically load all the sound stack.
+Sound cards supported
+This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
+It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
+I'm working on the III version of the card: if someone have useful
+informations about it, please let me know.
+For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
+activating the audio card with the MS-DOS device driver, then you have to
+<ctrl>-<alt>-<del> and boot Linux.
+Follow these steps:
+1) Compile Linux kernel with standard sound driver, using the emulation
+ you want, with the parameters of your audio card,
+ e.g. Microsoft Sound System irq10 dma3
+2) Install your new kernel as the default boot kernel.
+3) Boot MS-DOS and configure the audio card with the boot time device
+ driver, for MSS irq10 dma3 in our example.
+4) <ctrl>-<alt>-<del> and boot Linux. This will maintain the DOS configuration
+ and will boot the new kernel with sound driver. The sound driver will find
+ the audio card and will recognize and attach it.
+Reports on User successes
+> Date: Mon, 29 Jul 1996 08:35:40 +0100
+> From: Mr S J Greenaway <firstname.lastname@example.org>
+> To: email@example.com (Riccardo Facchetti)
+> Subject: Re: Audio Excel DSP 16 initialization code
+> Just to let you know got my Audio Excel (emulating a MSS) working
+> with my original SB16, thanks for the driver!
+Last revised: 20 August 1998