aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/core/hub.c33
-rw-r--r--drivers/usb/core/hub.h2
-rw-r--r--drivers/usb/core/port.c89
-rw-r--r--drivers/usb/host/pci-quirks.c19
-rw-r--r--drivers/usb/host/xhci-hub.c2
-rw-r--r--drivers/usb/misc/usbtest.c16
6 files changed, 119 insertions, 42 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 879b66e13370..21b99b4b4082 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1526,18 +1526,6 @@ static int hub_configure(struct usb_hub *hub,
dev_dbg(hub_dev, "%umA bus power budget for each child\n",
hub->mA_per_port);
- /* Update the HCD's internal representation of this hub before khubd
- * starts getting port status changes for devices under the hub.
- */
- if (hcd->driver->update_hub_device) {
- ret = hcd->driver->update_hub_device(hcd, hdev,
- &hub->tt, GFP_KERNEL);
- if (ret < 0) {
- message = "can't update HCD hub info";
- goto fail;
- }
- }
-
ret = hub_hub_status(hub, &hubstatus, &hubchange);
if (ret < 0) {
message = "can't get hub status";
@@ -1589,10 +1577,28 @@ static int hub_configure(struct usb_hub *hub,
}
}
hdev->maxchild = i;
+ for (i = 0; i < hdev->maxchild; i++) {
+ struct usb_port *port_dev = hub->ports[i];
+
+ pm_runtime_put(&port_dev->dev);
+ }
+
mutex_unlock(&usb_port_peer_mutex);
if (ret < 0)
goto fail;
+ /* Update the HCD's internal representation of this hub before khubd
+ * starts getting port status changes for devices under the hub.
+ */
+ if (hcd->driver->update_hub_device) {
+ ret = hcd->driver->update_hub_device(hcd, hdev,
+ &hub->tt, GFP_KERNEL);
+ if (ret < 0) {
+ message = "can't update HCD hub info";
+ goto fail;
+ }
+ }
+
usb_hub_adjust_deviceremovable(hdev, hub->descriptor);
hub_activate(hub, HUB_INIT);
@@ -3458,7 +3464,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
struct usb_device *udev = port_dev->child;
if (udev && udev->can_submit) {
- dev_warn(&port_dev->dev, "not suspended yet\n");
+ dev_warn(&port_dev->dev, "device %s not suspended yet\n",
+ dev_name(&udev->dev));
if (PMSG_IS_AUTO(msg))
return -EBUSY;
}
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 0a7cdc0ef0a9..326308e53961 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -84,6 +84,7 @@ struct usb_hub {
* @dev: generic device interface
* @port_owner: port's owner
* @peer: related usb2 and usb3 ports (share the same connector)
+ * @req: default pm qos request for hubs without port power control
* @connect_type: port's connect type
* @location: opaque representation of platform connector location
* @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
@@ -95,6 +96,7 @@ struct usb_port {
struct device dev;
struct usb_dev_state *port_owner;
struct usb_port *peer;
+ struct dev_pm_qos_request *req;
enum usb_port_connect_type connect_type;
usb_port_location_t location;
struct mutex status_lock;
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 62036faf56c0..fe1b6d0967e3 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -21,6 +21,8 @@
#include "hub.h"
+static int usb_port_block_power_off;
+
static const struct attribute_group *port_dev_group[];
static ssize_t connect_type_show(struct device *dev,
@@ -66,6 +68,7 @@ static void usb_port_device_release(struct device *dev)
{
struct usb_port *port_dev = to_usb_port(dev);
+ kfree(port_dev->req);
kfree(port_dev);
}
@@ -142,6 +145,9 @@ static int usb_port_runtime_suspend(struct device *dev)
== PM_QOS_FLAGS_ALL)
return -EAGAIN;
+ if (usb_port_block_power_off)
+ return -EBUSY;
+
usb_autopm_get_interface(intf);
retval = usb_hub_set_port_power(hdev, hub, port1, false);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
@@ -190,11 +196,19 @@ static int link_peers(struct usb_port *left, struct usb_port *right)
if (left->peer || right->peer) {
struct usb_port *lpeer = left->peer;
struct usb_port *rpeer = right->peer;
-
- WARN(1, "failed to peer %s and %s (%s -> %p) (%s -> %p)\n",
- dev_name(&left->dev), dev_name(&right->dev),
- dev_name(&left->dev), lpeer,
- dev_name(&right->dev), rpeer);
+ char *method;
+
+ if (left->location && left->location == right->location)
+ method = "location";
+ else
+ method = "default";
+
+ pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
+ dev_name(&left->dev), dev_name(&right->dev), method,
+ dev_name(&left->dev),
+ lpeer ? dev_name(&lpeer->dev) : "none",
+ dev_name(&right->dev),
+ rpeer ? dev_name(&rpeer->dev) : "none");
return -EBUSY;
}
@@ -251,6 +265,7 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right)
dev_warn(&left->dev, "failed to peer to %s (%d)\n",
dev_name(&right->dev), rc);
pr_warn_once("usb: port power management may be unreliable\n");
+ usb_port_block_power_off = 1;
}
}
@@ -386,9 +401,13 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
int retval;
port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL);
- if (!port_dev) {
- retval = -ENOMEM;
- goto exit;
+ if (!port_dev)
+ return -ENOMEM;
+
+ port_dev->req = kzalloc(sizeof(*(port_dev->req)), GFP_KERNEL);
+ if (!port_dev->req) {
+ kfree(port_dev);
+ return -ENOMEM;
}
hub->ports[port1 - 1] = port_dev;
@@ -404,31 +423,53 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
port1);
mutex_init(&port_dev->status_lock);
retval = device_register(&port_dev->dev);
- if (retval)
- goto error_register;
+ if (retval) {
+ put_device(&port_dev->dev);
+ return retval;
+ }
+
+ /* Set default policy of port-poweroff disabled. */
+ retval = dev_pm_qos_add_request(&port_dev->dev, port_dev->req,
+ DEV_PM_QOS_FLAGS, PM_QOS_FLAG_NO_POWER_OFF);
+ if (retval < 0) {
+ device_unregister(&port_dev->dev);
+ return retval;
+ }
find_and_link_peer(hub, port1);
+ /*
+ * Enable runtime pm and hold a refernce that hub_configure()
+ * will drop once the PM_QOS_NO_POWER_OFF flag state has been set
+ * and the hub has been fully registered (hdev->maxchild set).
+ */
pm_runtime_set_active(&port_dev->dev);
+ pm_runtime_get_noresume(&port_dev->dev);
+ pm_runtime_enable(&port_dev->dev);
+ device_enable_async_suspend(&port_dev->dev);
/*
- * Do not enable port runtime pm if the hub does not support
- * power switching. Also, userspace must have final say of
- * whether a port is permitted to power-off. Do not enable
- * runtime pm if we fail to expose pm_qos_no_power_off.
+ * Keep hidden the ability to enable port-poweroff if the hub
+ * does not support power switching.
*/
- if (hub_is_port_power_switchable(hub)
- && dev_pm_qos_expose_flags(&port_dev->dev,
- PM_QOS_FLAG_NO_POWER_OFF) == 0)
- pm_runtime_enable(&port_dev->dev);
+ if (!hub_is_port_power_switchable(hub))
+ return 0;
- device_enable_async_suspend(&port_dev->dev);
- return 0;
+ /* Attempt to let userspace take over the policy. */
+ retval = dev_pm_qos_expose_flags(&port_dev->dev,
+ PM_QOS_FLAG_NO_POWER_OFF);
+ if (retval < 0) {
+ dev_warn(&port_dev->dev, "failed to expose pm_qos_no_poweroff\n");
+ return 0;
+ }
-error_register:
- put_device(&port_dev->dev);
-exit:
- return retval;
+ /* Userspace owns the policy, drop the kernel 'no_poweroff' request. */
+ retval = dev_pm_qos_remove_request(port_dev->req);
+ if (retval >= 0) {
+ kfree(port_dev->req);
+ port_dev->req = NULL;
+ }
+ return 0;
}
void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 4a6d3dd68572..2f3acebb577a 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -656,6 +656,14 @@ static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
},
},
+ {
+ /* HASEE E200 */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
+ DMI_MATCH(DMI_BOARD_NAME, "E210"),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
+ },
+ },
{ }
};
@@ -665,9 +673,14 @@ static void ehci_bios_handoff(struct pci_dev *pdev,
{
int try_handoff = 1, tried_handoff = 0;
- /* The Pegatron Lucid tablet sporadically waits for 98 seconds trying
- * the handoff on its unused controller. Skip it. */
- if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
+ /*
+ * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+ * the handoff on its unused controller. Skip it.
+ *
+ * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
+ */
+ if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
+ pdev->device == 0x27cc)) {
if (dmi_check_system(ehci_dmi_nohandoff_table))
try_handoff = 0;
}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 6231ce6aa0c3..2b998c60faf2 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
struct xhci_command *command;
command = xhci_alloc_command(xhci, false, false,
- GFP_NOIO);
+ GFP_NOWAIT);
if (!command) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_free_command(xhci, cmd);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 51a6da256772..829f446064ea 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -7,7 +7,7 @@
#include <linux/moduleparam.h>
#include <linux/scatterlist.h>
#include <linux/mutex.h>
-
+#include <linux/timer.h>
#include <linux/usb.h>
#define SIMPLE_IO_TIMEOUT 10000 /* in milliseconds */
@@ -484,6 +484,14 @@ alloc_sglist(int nents, int max, int vary)
return sg;
}
+static void sg_timeout(unsigned long _req)
+{
+ struct usb_sg_request *req = (struct usb_sg_request *) _req;
+
+ req->status = -ETIMEDOUT;
+ usb_sg_cancel(req);
+}
+
static int perform_sglist(
struct usbtest_dev *tdev,
unsigned iterations,
@@ -495,6 +503,9 @@ static int perform_sglist(
{
struct usb_device *udev = testdev_to_usbdev(tdev);
int retval = 0;
+ struct timer_list sg_timer;
+
+ setup_timer_on_stack(&sg_timer, sg_timeout, (unsigned long) req);
while (retval == 0 && iterations-- > 0) {
retval = usb_sg_init(req, udev, pipe,
@@ -505,7 +516,10 @@ static int perform_sglist(
if (retval)
break;
+ mod_timer(&sg_timer, jiffies +
+ msecs_to_jiffies(SIMPLE_IO_TIMEOUT));
usb_sg_wait(req);
+ del_timer_sync(&sg_timer);
retval = req->status;
/* FIXME check resulting data pattern */