aboutsummaryrefslogtreecommitdiff
path: root/arch/cris/arch-v10/boot
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/cris/arch-v10/boot
downloadlinux-stericsson-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/cris/arch-v10/boot')
-rw-r--r--arch/cris/arch-v10/boot/Makefile12
-rw-r--r--arch/cris/arch-v10/boot/compressed/Makefile40
-rw-r--r--arch/cris/arch-v10/boot/compressed/README25
-rw-r--r--arch/cris/arch-v10/boot/compressed/decompress.ld29
-rw-r--r--arch/cris/arch-v10/boot/compressed/head.S111
-rw-r--r--arch/cris/arch-v10/boot/compressed/misc.c273
-rw-r--r--arch/cris/arch-v10/boot/rescue/Makefile55
-rw-r--r--arch/cris/arch-v10/boot/rescue/head.S333
-rw-r--r--arch/cris/arch-v10/boot/rescue/kimagerescue.S144
-rw-r--r--arch/cris/arch-v10/boot/rescue/rescue.ld20
-rw-r--r--arch/cris/arch-v10/boot/rescue/testrescue.S26
-rw-r--r--arch/cris/arch-v10/boot/tools/build.c288
12 files changed, 1356 insertions, 0 deletions
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
new file mode 100644
index 000000000000..fe6650368e6a
--- /dev/null
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -0,0 +1,12 @@
+#
+# arch/cris/boot/Makefile
+#
+
+zImage: compressed/vmlinuz
+
+compressed/vmlinuz: $(TOPDIR)/vmlinux
+ @$(MAKE) -C compressed vmlinuz
+
+clean:
+ rm -f zImage tools/build compressed/vmlinux.out
+ @$(MAKE) -C compressed clean
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
new file mode 100644
index 000000000000..5f71c2c819e6
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -0,0 +1,40 @@
+#
+# linux/arch/etrax100/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux files and romfs
+#
+
+CC = gcc-cris -melf -I $(TOPDIR)/include
+CFLAGS = -O2
+LD = ld-cris
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+OBJECTS = head.o misc.o
+
+# files to compress
+SYSTEM = $(TOPDIR)/vmlinux.bin
+
+all: vmlinuz
+
+decompress.bin: $(OBJECTS)
+ $(LD) -T decompress.ld -o decompress.o $(OBJECTS)
+ $(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin
+# save it for mkprod in the topdir.
+ cp decompress.bin $(TOPDIR)
+
+
+vmlinuz: piggy.img decompress.bin
+ cat decompress.bin piggy.img > vmlinuz
+ rm -f piggy.img
+
+head.o: head.S
+ $(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o
+
+# gzip the kernel image
+
+piggy.img: $(SYSTEM)
+ cat $(SYSTEM) | gzip -f -9 > piggy.img
+
+clean:
+ rm -f piggy.img vmlinuz vmlinuz.o
+
diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README
new file mode 100644
index 000000000000..48b3db9924b9
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/README
@@ -0,0 +1,25 @@
+Creation of the self-extracting compressed kernel image (vmlinuz)
+-----------------------------------------------------------------
+$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+
+This can be slightly confusing because it's a process with many steps.
+
+The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
+by that makefile into text and data binary files, vmlinux.text and
+vmlinux.data.
+
+Those files together with a ROM filesystem can be catted together and
+burned into a flash or executed directly at the DRAM origin.
+
+They can also be catted together and compressed with gzip, which is what
+happens in this makefile. Together they make up piggy.img.
+
+The decompressor is built into the file decompress.o. It is turned into
+the binary file decompress.bin, which is catted together with piggy.img
+into the file vmlinuz. It can be executed in an arbitrary place in flash.
+
+Be careful - it assumes some things about free locations in DRAM. It
+assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
+so it puts its code at 0x40700000, and initial stack at 0x40800000.
+
+-Bjorn
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
new file mode 100644
index 000000000000..0b0a14fe6177
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -0,0 +1,29 @@
+OUTPUT_FORMAT(elf32-us-cris)
+
+MEMORY
+ {
+ dram : ORIGIN = 0x40700000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ _stext = . ;
+ *(.text)
+ *(.rodata)
+ *(.rodata.*)
+ _etext = . ;
+ } > dram
+ .data :
+ {
+ *(.data)
+ _edata = . ;
+ } > dram
+ .bss :
+ {
+ *(.bss)
+ _end = ALIGN( 0x10 ) ;
+ } > dram
+}
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
new file mode 100644
index 000000000000..4cbdd4b1d9d6
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -0,0 +1,111 @@
+/*
+ * arch/cris/boot/compressed/head.S
+ *
+ * Copyright (C) 1999, 2001 Axis Communications AB
+ *
+ * Code that sets up the DRAM registers, calls the
+ * decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/arch/sv_addr_ag.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+
+ ;; Exported symbols
+
+ .globl _input_data
+
+
+ .text
+
+ nop
+ di
+
+;; We need to initialze DRAM registers before we start using the DRAM
+
+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
+ beq dram_init_finished
+ nop
+
+#include "../../lib/dram_init.S"
+
+dram_init_finished:
+
+ ;; Initiate the PA and PB ports
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
+ move.b r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
+ move.b r0, [R_PORT_PA_DIR]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
+ move.b r0, [R_PORT_PB_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
+ move.b r0, [R_PORT_PB_DIR]
+
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM in an eLinux
+ ;; product and put the sp at the top for now.
+
+ move.d 0x40800000, sp
+
+ ;; Figure out where the compressed piggyback image is
+ ;; in the flash (since we wont try to copy it to DRAM
+ ;; before unpacking). It is at _edata, but in flash.
+ ;; Use (_edata - basse) as offset to the current PC.
+
+basse: move.d pc, r5
+ and.d 0x7fffffff, r5 ; strip any non-cache bit
+ subq 2, r5 ; compensate for the move.d pc instr
+ move.d r5, r0 ; save for later - flash address of 'basse'
+ add.d _edata, r5
+ sub.d basse, r5 ; r5 = flash address of '_edata'
+
+ ;; Copy text+data to DRAM
+
+ move.d basse, r1 ; destination
+ move.d _edata, r2 ; end destination
+1: move.w [r0+], r3
+ move.w r3, [r1+]
+ cmp.d r2, r1
+ bcs 1b
+ nop
+
+ move.d r5, [_input_data] ; for the decompressor
+
+
+ ;; Clear the decompressors BSS (between _edata and _end)
+
+ moveq 0, r0
+ move.d _edata, r1
+ move.d _end, r2
+1: move.w r0, [r1+]
+ cmp.d r2, r1
+ bcs 1b
+ nop
+
+ ;; Do the decompression and save compressed size in _inptr
+
+ jsr _decompress_kernel
+
+ ;; Put start address of root partition in r9 so the kernel can use it
+ ;; when mounting from flash
+
+ move.d [_input_data], r9 ; flash address of compressed kernel
+ add.d [_inptr], r9 ; size of compressed kernel
+
+ ;; Enter the decompressed kernel
+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
+ jump 0x40004000 ; kernel is linked to this address
+
+ .data
+
+_input_data:
+ .dword 0 ; used by the decompressor
+
+#include "../../lib/hw_settings.S"
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
new file mode 100644
index 000000000000..1b5e83f1f846
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -0,0 +1,273 @@
+/*
+ * misc.c
+ *
+ * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * adoptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+
+/* where the piggybacked kernel image expects itself to live.
+ * it is the same address we use when we network load an uncompressed
+ * image into DRAM, and it is the address the kernel is linked to live
+ * at by vmlinux.lds.S
+ */
+
+#define KERNEL_LOAD_ADR 0x40004000
+
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <asm/arch/svinto.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+void* memset(void* s, int c, size_t n);
+void* memcpy(void* __dest, __const void* __src,
+ size_t __n);
+
+#define memzero(s, n) memset ((s), 0, (n))
+
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+unsigned inptr = 0; /* index of next byte to be processed in inbuf
+ * After decompression it will contain the
+ * compressed size, and head.S will read it.
+ */
+
+static unsigned outcnt = 0; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() inbuf[inptr++]
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char *input_data; /* lives in head.S */
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static void puts(const char *);
+
+/* the "heap" is put directly after the BSS ends, at end */
+
+extern int end;
+static long free_mem_ptr = (long)&end;
+
+#include "../../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size <0) error("Malloc error");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *)free_mem_ptr;
+ free_mem_ptr += size;
+
+ return p;
+}
+
+static void free(void *where)
+{ /* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ free_mem_ptr = (long) *ptr;
+}
+
+/* decompressor info and error messages to serial console */
+
+static void
+puts(const char *s)
+{
+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+ while(*s) {
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+ *R_SERIAL0_TR_DATA = *s++;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+ *R_SERIAL1_TR_DATA = *s++;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+ *R_SERIAL2_TR_DATA = *s++;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+ *R_SERIAL3_TR_DATA = *s++;
+#endif
+ }
+#endif
+}
+
+void*
+memset(void* s, int c, size_t n)
+{
+ int i;
+ char *ss = (char*)s;
+
+ for (i=0;i<n;i++) ss[i] = c;
+}
+
+void*
+memcpy(void* __dest, __const void* __src,
+ size_t __n)
+{
+ int i;
+ char *d = (char *)__dest, *s = (char *)__src;
+
+ for (i=0;i<__n;i++) d[i] = s[i];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+
+static void
+flush_window()
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void
+error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted\n");
+
+ while(1); /* Halt */
+}
+
+void
+setup_normal_output_buffer()
+{
+ output_data = (char *)KERNEL_LOAD_ADR;
+}
+
+void
+decompress_kernel()
+{
+ char revision;
+
+ /* input_data is set in head.S */
+ inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ *R_SERIAL0_XOFF = 0;
+ *R_SERIAL0_BAUD = 0x99;
+ *R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ *R_SERIAL1_XOFF = 0;
+ *R_SERIAL1_BAUD = 0x99;
+ *R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ *R_GEN_CONFIG = 0x08;
+ *R_SERIAL2_XOFF = 0;
+ *R_SERIAL2_BAUD = 0x99;
+ *R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ *R_GEN_CONFIG = 0x100;
+ *R_SERIAL3_XOFF = 0;
+ *R_SERIAL3_BAUD = 0x99;
+ *R_SERIAL3_TR_CTRL = 0x40;
+#endif
+
+ setup_normal_output_buffer();
+
+ makecrc();
+
+ __asm__ volatile ("move vr,%0" : "=rm" (revision));
+ if (revision < 10)
+ {
+ puts("You need an ETRAX 100LX to run linux 2.6\n");
+ while(1);
+ }
+
+ puts("Uncompressing Linux...\n");
+ gunzip();
+ puts("Done. Now booting the kernel.\n");
+}
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
new file mode 100644
index 000000000000..e9f2ba2ad02c
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -0,0 +1,55 @@
+#
+# Makefile for rescue code
+#
+ifndef TOPDIR
+TOPDIR = ../../../..
+endif
+CC = gcc-cris -mlinux -I $(TOPDIR)/include
+CFLAGS = -O2
+LD = gcc-cris -mlinux -nostdlib
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+
+all: rescue.bin testrescue.bin kimagerescue.bin
+
+rescue: rescue.bin
+ # do nothing
+
+rescue.bin: head.o
+ $(LD) -T rescue.ld -o rescue.o head.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin
+ cp rescue.bin $(TOPDIR)
+
+testrescue.bin: testrescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin
+# Pad it to 784 bytes
+ dd if=/dev/zero of=tmp2423 bs=1 count=784
+ cat tr.bin tmp2423 >testrescue_tmp.bin
+ dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784
+ rm tr.bin tmp2423 testrescue_tmp.bin
+
+kimagerescue.bin: kimagerescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin
+# Pad it to 784 bytes, that's what the rescue loader expects
+ dd if=/dev/zero of=tmp2423 bs=1 count=784
+ cat ktr.bin tmp2423 >kimagerescue_tmp.bin
+ dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784
+ rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
+head.o: head.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
+
+testrescue.o: testrescue.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
+
+kimagerescue.o: kimagerescue.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
+
+clean:
+ rm -f *.o *.bin
+
+fastdep:
+
+modules:
+
+modules-install:
diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S
new file mode 100644
index 000000000000..8689ea972c46
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/head.S
@@ -0,0 +1,333 @@
+/* $Id: head.S,v 1.6 2003/04/09 08:12:43 pkj Exp $
+ *
+ * Rescue code, made to reside at the beginning of the
+ * flash-memory. when it starts, it checks a partition
+ * table at the first sector after the rescue sector.
+ * the partition table was generated by the product builder
+ * script and contains offsets, lengths, types and checksums
+ * for each partition that this code should check.
+ *
+ * If any of the checksums fail, we assume the flash is so
+ * corrupt that we cant use it to boot into the ftp flash
+ * loader, and instead we initialize the serial port to
+ * receive a flash-loader and new flash image. we dont include
+ * any flash code here, but just accept a certain amount of
+ * bytes from the serial port and jump into it. the downloaded
+ * code is put in the cache.
+ *
+ * The partitiontable is designed so that it is transparent to
+ * code execution - it has a relative branch opcode in the
+ * beginning that jumps over it. each entry contains extra
+ * data so we can add stuff later.
+ *
+ * Partition table format:
+ *
+ * Code transparency:
+ *
+ * 2 bytes [opcode 'nop']
+ * 2 bytes [opcode 'di']
+ * 4 bytes [opcode 'ba <offset>', 8-bit or 16-bit version]
+ * 2 bytes [opcode 'nop', delay slot]
+ *
+ * Table validation (at +10):
+ *
+ * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe]
+ * 2 bytes [length of all entries plus the end marker]
+ * 4 bytes [checksum for the partitiontable itself]
+ *
+ * Entries, each with the following format, last has offset -1:
+ *
+ * 4 bytes [offset in bytes, from start of flash]
+ * 4 bytes [length in bytes of partition]
+ * 4 bytes [checksum, simple longword sum]
+ * 2 bytes [partition type]
+ * 2 bytes [flags, only bit 0 used, ro/rw = 1/0]
+ * 16 bytes [reserved for future use]
+ *
+ * End marker
+ *
+ * 4 bytes [-1]
+ *
+ * 10 bytes [0, padding]
+ *
+ * Bit 0 in flags signifies RW or RO. The rescue code only bothers
+ * to check the checksum for RO partitions, since the others will
+ * change their data without updating the checksums. A 1 in bit 0
+ * means RO, 0 means RW. That way, it is possible to set a partition
+ * in RO mode initially, and later mark it as RW, since you can always
+ * write 0's to the flash.
+ *
+ * During the wait for serial input, the status LED will flash so the
+ * user knows something went wrong.
+ *
+ * Copyright (C) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/arch/sv_addr_ag.h>
+
+ ;; The partitiontable is looked for at the first sector after the boot
+ ;; sector. Sector size is 65536 bytes in all flashes we use.
+
+#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
+#define PTABLE_MAGIC 0xbeef
+
+ ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
+ ;; That is not where we put our downloaded serial boot-code. The length is
+ ;; enough for downloading code that loads the rest of itself (after
+ ;; having setup the DRAM etc). It is the same length as the on-chip
+ ;; ROM loads, so the same host loader can be used to load a rescued
+ ;; product as well as one booted through the Etrax serial boot code.
+
+#define CODE_START 0x40000000
+#define CODE_LENGTH 784
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+#define NOP_DI 0xf025050f
+#define RAM_INIT_MAGIC 0x56902387
+
+ .text
+
+ ;; This is the entry point of the rescue code
+ ;; 0x80000000 if loaded in flash (as it should be)
+ ;; since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+ nop
+ di
+
+ jump in_cache ; enter cached area instead
+in_cache:
+
+ ;; first put a jump test to give a possibility of upgrading the rescue code
+ ;; without erasing/reflashing the sector. we put a longword of -1 here and if
+ ;; it is not -1, we jump using the value as jump target. since we can always
+ ;; change 1's to 0's without erasing the sector, it is possible to add new
+ ;; code after this and altering the jumptarget in an upgrade.
+
+jtcd: move.d [jumptarget], $r0
+ cmp.d 0xffffffff, $r0
+ beq no_newjump
+ nop
+
+ jump [$r0]
+
+jumptarget:
+ .dword 0xffffffff ; can be overwritten later to insert new code
+
+no_newjump:
+#ifdef CONFIG_ETRAX_ETHERNET
+ ;; Start MII clock to make sure it is running when tranceiver is reset
+ move.d 0x3, $r0 ; enable = on, phy = mii_clk
+ move.d $r0, [R_NETWORK_GEN_CONFIG]
+#endif
+
+ ;; We need to setup the bus registers before we start using the DRAM
+#include "../../lib/dram_init.S"
+
+ ;; we now should go through the checksum-table and check the listed
+ ;; partitions for errors.
+
+ move.d PTABLE_START, $r3
+ move.d [$r3], $r0
+ cmp.d NOP_DI, $r0 ; make sure the nop/di is there...
+ bne do_rescue
+ nop
+
+ ;; skip the code transparency block (10 bytes).
+
+ addq 10, $r3
+
+ ;; check for correct magic
+
+ move.w [$r3+], $r0
+ cmp.w PTABLE_MAGIC, $r0
+ bne do_rescue ; didn't recognize - trig rescue
+ nop
+
+ ;; check for correct ptable checksum
+
+ movu.w [$r3+], $r2 ; ptable length
+ move.d $r2, $r8 ; save for later, length of total ptable
+ addq 28, $r8 ; account for the rest
+ move.d [$r3+], $r4 ; ptable checksum
+ move.d $r3, $r1
+ jsr checksum ; r1 source, r2 length, returns in r0
+
+ cmp.d $r0, $r4
+ bne do_rescue ; didn't match - trig rescue
+ nop
+
+ ;; ptable is ok. validate each entry.
+
+ moveq -1, $r7
+
+ploop: move.d [$r3+], $r1 ; partition offset (from ptable start)
+ bne notfirst ; check if it is the partition containing ptable
+ nop ; yes..
+ move.d $r8, $r1 ; for its checksum check, skip the ptable
+ move.d [$r3+], $r2 ; partition length
+ sub.d $r8, $r2 ; minus the ptable length
+ ba bosse
+ nop
+notfirst:
+ cmp.d -1, $r1 ; the end of the ptable ?
+ beq flash_ok ; if so, the flash is validated
+ move.d [$r3+], $r2 ; partition length
+bosse: move.d [$r3+], $r5 ; checksum
+ move.d [$r3+], $r4 ; type and flags
+ addq 16, $r3 ; skip the reserved bytes
+ btstq 16, $r4 ; check ro flag
+ bpl ploop ; rw partition, skip validation
+ nop
+ btstq 17, $r4 ; check bootable flag
+ bpl 1f
+ nop
+ move.d $r1, $r7 ; remember boot partition offset
+1:
+
+ add.d PTABLE_START, $r1
+
+ jsr checksum ; checksum the partition
+
+ cmp.d $r0, $r5
+ beq ploop ; checksums matched, go to next entry
+ nop
+
+ ;; otherwise fall through to the rescue code.
+
+do_rescue:
+ ;; setup port PA and PB default initial directions and data
+ ;; (so we can flash LEDs, and so that DTR and others are set)
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ ;; setup the serial port at 115200 baud
+
+ moveq 0, $r0
+ move.d $r0, [SERXOFF]
+
+ move.b 0x99, $r0
+ move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
+
+ move.b 0x40, $r0 ; rec enable
+ move.b $r0, [SERRECC]
+
+ moveq 0, $r1 ; "timer" to clock out a LED red flash
+ move.d CODE_START, $r3 ; destination counter
+ movu.w CODE_LENGTH, $r4; length
+
+wait_ser:
+ addq 1, $r1
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+ move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+ btstq 16, $r1
+ bpl 1f
+ nop
+ or.d $r0, $r2 ; set bit
+ ba 2f
+ nop
+1: not $r0 ; clear bit
+ and.d $r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b $r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b $r2, [R_PORT_PB_DATA]
+#endif
+#ifdef CONFIG_ETRAX_90000000_LEDS
+ move.b $r2, [0x90000000]
+#endif
+#endif
+
+ ;; check if we got something on the serial port
+
+ move.b [SERSTAT], $r0
+ btstq 0, $r0 ; data_avail
+ bpl wait_ser
+ nop
+
+ ;; got something - copy the byte and loop
+
+ move.b [SERRDAT], $r0
+ move.b $r0, [$r3+]
+
+ subq 1, $r4 ; decrease length
+ bne wait_ser
+ nop
+
+ ;; jump into downloaded code
+
+ move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is initialized
+ jump CODE_START
+
+flash_ok:
+ ;; check r7, which contains either -1 or the partition to boot from
+
+ cmp.d -1, $r7
+ bne 1f
+ nop
+ move.d PTABLE_START, $r7; otherwise use the ptable start
+1:
+ move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is initialized
+ jump $r7 ; boot!
+
+
+ ;; Helper subroutines
+
+ ;; Will checksum by simple addition
+ ;; r1 - source
+ ;; r2 - length in bytes
+ ;; result will be in r0
+checksum:
+ moveq 0, $r0
+1: addu.b [$r1+], $r0
+ subq 1, $r2
+ bne 1b
+ nop
+ ret
+ nop
diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S
new file mode 100644
index 000000000000..264bf7afc9ad
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/kimagerescue.S
@@ -0,0 +1,144 @@
+/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * Rescue code to be prepended on a kimage and copied to the
+ * rescue serial port.
+ * This is called from the rescue code, it will copy received data to
+ * 4004000 and after a timeout jump to it.
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/sv_addr_ag.h>
+
+#define CODE_START 0x40004000
+#define CODE_LENGTH 784
+#define TIMEOUT_VALUE 1000
+
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+ .text
+ ;; This is the entry point of the rescue code
+ ;; 0x80000000 if loaded in flash (as it should be)
+ ;; since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+ nop
+ di
+#ifndef CONFIG_SVINTO_SIM
+ ;; setup port PA and PB default initial directions and data
+ ;; (so we can flash LEDs, and so that DTR and others are set)
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ ;; We need to setup the bus registers before we start using the DRAM
+#include "../../lib/dram_init.S"
+
+#endif
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM in an eLinux
+ ;; product and put the sp at the top for now.
+
+ move.d 0x40800000, $sp
+
+ ;; setup the serial port at 115200 baud
+
+ moveq 0, $r0
+ move.d $r0, [SERXOFF]
+
+ move.b 0x99, $r0
+ move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
+
+ move.b 0x40, $r0 ; rec enable
+ move.b $r0, [SERRECC]
+
+
+ moveq 0, $r1 ; "timer" to clock out a LED red flash
+ move.d CODE_START, $r3 ; destination counter
+ move.d CODE_LENGTH, $r4 ; length
+ move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump
+
+wait_ser:
+ addq 1, $r1
+ subq 1, $r5 ; decrease timeout
+ beq jump_start ; timed out
+ nop
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+ move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+ btstq 16, $r1
+ bpl 1f
+ nop
+ or.d $r0, $r2 ; set bit
+ ba 2f
+ nop
+1: not $r0 ; clear bit
+ and.d $r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b $r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b $r2, [R_PORT_PB_DATA]
+#endif
+#endif
+
+ ;; check if we got something on the serial port
+
+ move.b [SERSTAT], $r0
+ btstq 0, $r0 ; data_avail
+ bpl wait_ser
+ nop
+
+ ;; got something - copy the byte and loop
+
+ move.b [SERRDAT], $r0
+ move.b $r0, [$r3+]
+ move.d TIMEOUT_VALUE, $r5 ; reset "timeout"
+ subq 1, $r4 ; decrease length
+ bne wait_ser
+ nop
+jump_start:
+ ;; jump into downloaded code
+
+ jump CODE_START
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.ld b/arch/cris/arch-v10/boot/rescue/rescue.ld
new file mode 100644
index 000000000000..0b52a9490db6
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/rescue.ld
@@ -0,0 +1,20 @@
+MEMORY
+ {
+ flash : ORIGIN = 0x00000000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ stext = . ;
+ *(.text)
+ etext = . ;
+ } > flash
+ .data :
+ {
+ *(.data)
+ edata = . ;
+ } > flash
+}
diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S
new file mode 100644
index 000000000000..566a9f341254
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/testrescue.S
@@ -0,0 +1,26 @@
+/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * Simple testcode to download by the rescue block.
+ * Just lits some LEDs to show it was downloaded correctly.
+ *
+ * Copyright (C) 1999 Axis Communications AB
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/sv_addr_ag.h>
+
+ .text
+
+ nop
+ nop
+ moveq -1, $r2
+ move.b $r2, [R_PORT_PA_DIR]
+ moveq 0, $r2
+ move.b $r2, [R_PORT_PA_DATA]
+
+endless:
+ nop
+ ba endless
+ nop
+
+
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/arch-v10/boot/tools/build.c
new file mode 100644
index 000000000000..2f9bbb26d603
--- /dev/null
+++ b/arch/cris/arch-v10/boot/tools/build.c
@@ -0,0 +1,288 @@
+/*
+ * linux/tools/build.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ */
+
+#include <stdio.h> /* fprintf */
+#include <string.h>
+#include <stdlib.h> /* contains exit */
+#include <sys/types.h> /* unistd.h needs this */
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h> /* contains read/write */
+#include <fcntl.h>
+#include <linux/a.out.h>
+#include <errno.h>
+
+#define MINIX_HEADER 32
+
+#define N_MAGIC_OFFSET 1024
+#ifndef __BFD__
+static int GCC_HEADER = sizeof(struct exec);
+#endif
+
+#ifdef __BIG_KERNEL__
+#define SYS_SIZE 0xffff
+#else
+#define SYS_SIZE DEF_SYSSIZE
+#endif
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* max nr of sectors of setup: don't change unless you also change
+ * bootsect etc */
+#define SETUP_SECTS 4
+
+#define STRINGIFY(x) #x
+
+typedef union {
+ int i;
+ long l;
+ short s[2];
+ char b[4];
+} conv;
+
+long intel_long(long l)
+{
+ conv t;
+
+ t.b[0] = l & 0xff; l >>= 8;
+ t.b[1] = l & 0xff; l >>= 8;
+ t.b[2] = l & 0xff; l >>= 8;
+ t.b[3] = l & 0xff; l >>= 8;
+ return t.l;
+}
+
+int intel_int(int i)
+{
+ conv t;
+
+ t.b[0] = i & 0xff; i >>= 8;
+ t.b[1] = i & 0xff; i >>= 8;
+ t.b[2] = i & 0xff; i >>= 8;
+ t.b[3] = i & 0xff; i >>= 8;
+ return t.i;
+}
+
+short intel_short(short l)
+{
+ conv t;
+
+ t.b[0] = l & 0xff; l >>= 8;
+ t.b[1] = l & 0xff; l >>= 8;
+ return t.s[0];
+}
+
+void die(const char * str)
+{
+ fprintf(stderr,"%s\n",str);
+ exit(1);
+}
+
+void usage(void)
+{
+ die("Usage: build bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char ** argv)
+{
+ int i,c,id,sz,tmp_int;
+ unsigned long sys_size, tmp_long;
+ char buf[1024];
+#ifndef __BFD__
+ struct exec *ex = (struct exec *)buf;
+#endif
+ char major_root, minor_root;
+ struct stat sb;
+ unsigned char setup_sectors;
+
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+ for (i=0;i<sizeof buf; i++) buf[i]=0;
+ if ((id=open(argv[1],O_RDONLY,0))<0)
+ die("Unable to open 'boot'");
+ if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+ die("Unable to read header of 'boot'");
+ if (((long *) buf)[0]!=intel_long(0x04100301))
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[3] != 0)
+ die("Illegal data segment in 'boot'");
+ if (((long *) buf)[4] != 0)
+ die("Illegal bss in 'boot'");
+ if (((long *) buf)[5] != 0)
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[7] != 0)
+ die("Illegal symbol table in 'boot'");
+ i=read(id,buf,sizeof buf);
+ fprintf(stderr,"Boot sector %d bytes.\n",i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = (char) minor_root;
+ buf[509] = (char) major_root;
+ i=write(1,buf,512);
+ if (i!=512)
+ die("Write call failed");
+ close (id);
+
+ if ((id=open(argv[2],O_RDONLY,0))<0)
+ die("Unable to open 'setup'");
+ if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+ die("Unable to read header of 'setup'");
+ if (((long *) buf)[0]!=intel_long(0x04100301))
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[3] != 0)
+ die("Illegal data segment in 'setup'");
+ if (((long *) buf)[4] != 0)
+ die("Illegal bss in 'setup'");
+ if (((long *) buf)[5] != 0)
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[7] != 0)
+ die("Illegal symbol table in 'setup'");
+ for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
+#ifdef __BIG_KERNEL__
+ {
+ if (!i) {
+ /* Working with memcpy because of alignment constraints
+ on Sparc - Gertjan */
+ memcpy(&tmp_long, &buf[2], sizeof(long));
+ if (tmp_long != intel_long(0x53726448) )
+ die("Wrong magic in loader header of 'setup'");
+ memcpy(&tmp_int, &buf[6], sizeof(int));
+ if (tmp_int < intel_int(0x200))
+ die("Wrong version of loader header of 'setup'");
+ buf[0x11] = 1; /* LOADED_HIGH */
+ tmp_long = intel_long(0x100000);
+ memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */
+ }
+#endif
+ if (write(1,buf,c)!=c)
+ die("Write call failed");
+#ifdef __BIG_KERNEL__
+ }
+#endif
+ if (c != 0)
+ die("read-error on 'setup'");
+ close (id);
+ setup_sectors = (unsigned char)((i + 511) / 512);
+ /* for compatibility with LILO */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr,"Setup is %d bytes.\n",i);
+ for (c=0 ; c<sizeof(buf) ; c++)
+ buf[c] = '\0';
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1,buf,c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ if ((id=open(argv[3],O_RDONLY,0))<0)
+ die("Unable to open 'system'");
+#ifndef __BFD__
+ if (read(id,buf,GCC_HEADER) != GCC_HEADER)
+ die("Unable to read header of 'system'");
+ if (N_MAGIC(*ex) == ZMAGIC) {
+ GCC_HEADER = N_MAGIC_OFFSET;
+ lseek(id, GCC_HEADER, SEEK_SET);
+ } else if (N_MAGIC(*ex) != QMAGIC)
+ die("Non-GCC header of 'system'");
+ fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
+ (ex->a_text+ex->a_data+ex->a_bss)/1024,
+ ex->a_text /1024,
+ ex->a_data /1024,
+ ex->a_bss /1024);
+ sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
+#else
+ if (fstat (id, &sb)) {
+ perror ("fstat");
+ die ("Unable to stat 'system'");
+ }
+ sz = sb.st_size;
+ fprintf (stderr, "System is %d kB\n", sz/1024);
+#endif
+ sys_size = (sz + 15) / 16;
+ if (sys_size > SYS_SIZE)
+ die("System is too big");
+ while (sz > 0) {
+ int l, n;
+
+ l = sz;
+ if (l > sizeof(buf))
+ l = sizeof(buf);
+ if ((n=read(id, buf, l)) != l) {
+ if (n == -1)
+ perror(argv[1]);
+ else
+ fprintf(stderr, "Unexpected EOF\n");
+ die("Can't read 'system'");
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(id);
+ if (lseek(1, 497, 0) == 497) {
+ if (write(1, &setup_sectors, 1) != 1)
+ die("Write of setup sectors failed");
+ }
+ if (lseek(1,500,0) == 500) {
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write failed");
+ }
+ return(0);
+}