|author||Linus Torvalds <firstname.lastname@example.org>||2005-04-16 15:20:36 -0700|
|committer||Linus Torvalds <email@example.com>||2005-04-16 15:20:36 -0700|
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/sound/oss/CS4232')
1 files changed, 23 insertions, 0 deletions
diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232
new file mode 100644
@@ -0,0 +1,23 @@
+To configure the Crystal CS423x sound chip and activate its DSP functions,
+modules may be loaded in this order:
+ modprobe sound
+ insmod ad1848
+ insmod uart401
+ insmod cs4232 io=* irq=* dma=* dma2=*
+This is the meaning of the parameters:
+ io--I/O address of the Windows Sound System (normally 0x534)
+ irq--IRQ of this device
+ dma and dma2--DMA channels (DMA2 may be 0)
+On some cards, the board attempts to do non-PnP setup, and fails. If you
+have problems, use Linux' PnP facilities.
+To get MIDI facilities add
+ insmod opl3 io=*
+where "io" is the I/O address of the OPL3 synthesizer. This will be shown
+in /proc/sys/pnp and is normally 0x388.