|author||Linus Torvalds <firstname.lastname@example.org>||2005-04-16 15:20:36 -0700|
|committer||Linus Torvalds <email@example.com>||2005-04-16 15:20:36 -0700|
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/networking/ray_cs.txt')
1 files changed, 151 insertions, 0 deletions
diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt
new file mode 100644
@@ -0,0 +1,151 @@
+September 21, 1999
+Copyright (c) 1998 Corey Thomas (firstname.lastname@example.org)
+This file is the documentation for the Raylink Wireless LAN card driver for
+Linux. The Raylink wireless LAN card is a PCMCIA card which provides IEEE
+802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
+See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
+card. This driver is in early development and does have bugs. See the known
+bugs and limitations at the end of this document for more information.
+This driver also works with WebGear's Aviator 2.4 and Aviator Pro
+wireless LAN cards.
+As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
+source. My web page for the development of ray_cs is at
+http://world.std.com/~corey/raylink.html and I can be emailed at
+The kernel driver is based on ray_cs-1.62.tgz
+The driver at my web page is intended to be used as an add on to
+David Hinds pcmcia package. All the command line parameters are
+available when compiled as a module. When built into the kernel, only
+the essid= string parameter is available via the kernel command line.
+This will change after the method of sorting out parameters for all
+the PCMCIA drivers is agreed upon. If you must have a built in driver
+with nondefault parameters, they can be edited in
+/usr/src/linux/drivers/net/pcmcia/ray_cs.c. Searching for MODULE_PARM
+will find them all.
+Information on card services is available at:
+Card services user programs are still required for PCMCIA devices.
+pcmcia-cs-3.1.1 or greater is required for the kernel version of
+Currently, ray_cs is not part of David Hinds card services package,
+so the following magic is required.
+At the end of the /etc/pcmcia/config.opts file, add the line:
+This will make card services read the ray_cs.opts file
+when starting. Create the file /etc/pcmcia/ray_cs.opts containing the
+#### start of /etc/pcmcia/ray_cs.opts ###################
+# Configuration options for Raylink Wireless LAN PCMCIA card
+ class "network" module "misc/ray_cs"
+card "RayLink PC Card WLAN Adapter"
+ manfid 0x01a6, 0x0000
+ bind "ray_cs"
+module "misc/ray_cs" opts ""
+#### end of /etc/pcmcia/ray_cs.opts #####################
+To join an existing network with
+different parameters, contact the network administrator for the
+configuration information, and edit /etc/pcmcia/ray_cs.opts.
+Add the parameters below between the empty quotes.
+Parameters for ray_cs driver which may be specified in ray_cs.opts:
+bc integer 0 = normal mode (802.11 timing)
+ 1 = slow down inter frame timing to allow
+ operation with older breezecom access
+beacon_period integer beacon period in Kilo-microseconds
+ legal values = must be integer multiple
+ of hop dwell
+ default = 256
+country integer 1 = USA (default)
+ 2 = Europe
+ 3 = Japan
+ 4 = Korea
+ 5 = Spain
+ 6 = France
+ 7 = Israel
+ 8 = Australia
+essid string ESS ID - network name to join
+ string with maximum length of 32 chars
+ default value = "ADHOC_ESSID"
+hop_dwell integer hop dwell time in Kilo-microseconds
+ legal values = 16,32,64,128(default),256
+irq_mask integer linux standard 16 bit value 1bit/IRQ
+ lsb is IRQ 0, bit 1 is IRQ 1 etc.
+ Used to restrict choice of IRQ's to use.
+ Recommended method for controlling
+ interrupts is in /etc/pcmcia/config.opts
+net_type integer 0 (default) = adhoc network,
+ 1 = infrastructure
+phy_addr string string containing new MAC address in
+ hex, must start with x eg
+psm integer 0 = continuously active
+ 1 = power save mode (not useful yet)
+pc_debug integer (0-5) larger values for more verbose
+ logging. Replaces ray_debug.
+ray_debug integer Replaced with pc_debug
+ray_mem_speed integer defaults to 500
+sniffer integer 0 = not sniffer (default)
+ 1 = sniffer which can be used to record all
+ network traffic using tcpdump or similar,
+ but no normal network use is allowed.
+translate integer 0 = no translation (encapsulate frames)
+ 1 = translation (RFC1042/802.1)
+More on sniffer mode:
+tcpdump does not understand 802.11 headers, so it can't
+interpret the contents, but it can record to a file. This is only
+useful for debugging 802.11 lowlevel protocols that are not visible to
+linux. If you want to watch ftp xfers, or do similar things, you
+don't need to use sniffer mode. Also, some packet types are never
+sent up by the card, so you will never see them (ack, rts, cts, probe
+etc.) There is a simple program (showcap) included in the ray_cs
+package which parses the 802.11 headers.
+Known Problems and missing features
+ Does not work with non x86
+ Does not work with SMP
+ Support for defragmenting frames is not yet debugged, and in
+ fact is known to not work. I have never encountered a net set
+ up to fragment, but still, it should be fixed.
+ The ioctl support is incomplete. The hardware address cannot be set
+ using ifconfig yet. If a different hardware address is needed, it may
+ be set using the phy_addr parameter in ray_cs.opts. This requires
+ a card insertion to take effect.