aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-19 17:53:20 -1000
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-19 17:53:20 -1000
commit58c72f94efb7d2f8dc918eaf43e7bbb20480fdb9 (patch)
tree3fc013f233f0100cb44385a6e091c4f9ccffd55a
parent894e552cfaa3389f934dc68180bac692aebcf26b (diff)
parent21278aeafbfacfd62b3e613525f0c694a029dac1 (diff)
downloadlinux-stericsson-58c72f94efb7d2f8dc918eaf43e7bbb20480fdb9.tar.gz
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "A first set of bug fixes that didn't make it for the merge window, and two Kconfig cleanups that still make sense at this point. Unfortunately, one of the two cleanups caused an unintended change in the original version, so we had to revert one part of it and do some more testing to ensure the rest is really fine. There was also a last-minute rebase of the patches to remove another bad commit" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: use menuconfig for sub-arch menus ARM: multi_v7_defconfig: re-enable SDHCI drivers ARM: EXYNOS: Fix compilation warning ARM: exynos: move sysram info to exynos.c ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board ARM: exynos: cleanup kconfig option display misc: vexpress: fix error handling vexpress_syscfg_regmap_init() ARM: Remove ARCH_HAS_CPUFREQ config option ARM: integrator: fix section mismatch problem ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size ARM: samsung: make SAMSUNG_DMADEV optional remoteproc: da8xx: don't select CMA on no-MMU bus/arm-cci: add dependency on OF && CPU_V7 ARM: keystone requires ARM_PATCH_PHYS_VIRT ARM: omap2: fix am43xx dependency on l2x0 cache
-rw-r--r--arch/arm/Kconfig20
-rw-r--r--arch/arm/boot/dts/armada-375-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts2
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/mach-bcm/Kconfig7
-rw-r--r--arch/arm/mach-berlin/Kconfig6
-rw-r--r--arch/arm/mach-cns3xxx/Kconfig7
-rw-r--r--arch/arm/mach-davinci/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Kconfig7
-rw-r--r--arch/arm/mach-exynos/common.h1
-rw-r--r--arch/arm/mach-exynos/exynos.c31
-rw-r--r--arch/arm/mach-exynos/platsmp.c26
-rw-r--r--arch/arm/mach-highbank/Kconfig1
-rw-r--r--arch/arm/mach-imx/Kconfig10
-rw-r--r--arch/arm/mach-integrator/Kconfig2
-rw-r--r--arch/arm/mach-integrator/impd1.c12
-rw-r--r--arch/arm/mach-keystone/Kconfig1
-rw-r--r--arch/arm/mach-moxart/Kconfig2
-rw-r--r--arch/arm/mach-mvebu/Kconfig7
-rw-r--r--arch/arm/mach-nomadik/Kconfig4
-rw-r--r--arch/arm/mach-omap2/Kconfig7
-rw-r--r--arch/arm/mach-omap2/common.h7
-rw-r--r--arch/arm/mach-prima2/Kconfig6
-rw-r--r--arch/arm/mach-qcom/Kconfig6
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig2
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig4
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig6
-rw-r--r--arch/arm/mach-s5pc100/Kconfig3
-rw-r--r--arch/arm/mach-s5pv210/Kconfig3
-rw-r--r--arch/arm/mach-shmobile/Kconfig6
-rw-r--r--arch/arm/mach-spear/Kconfig1
-rw-r--r--arch/arm/mach-sti/Kconfig2
-rw-r--r--arch/arm/mach-tegra/Kconfig8
-rw-r--r--arch/arm/mach-u300/Kconfig6
-rw-r--r--arch/arm/mach-ux500/Kconfig7
-rw-r--r--arch/arm/mach-vexpress/Kconfig8
-rw-r--r--arch/arm/mach-vt8500/Kconfig1
-rw-r--r--arch/arm/mach-zynq/Kconfig1
-rw-r--r--arch/arm/plat-samsung/Kconfig28
-rw-r--r--drivers/bus/Kconfig2
-rw-r--r--drivers/misc/vexpress-syscfg.c12
-rw-r--r--drivers/remoteproc/Kconfig2
44 files changed, 123 insertions, 158 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 87b63fde06d7..245058b3b0ef 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
-config ARCH_HAS_CPUFREQ
- bool
- help
- Internal node to signify that the ARCH has CPUFREQ support
- and that the relevant menu configurations are displayed for
- it.
-
config ARCH_HAS_BANDGAP
bool
@@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
- select ARCH_HAS_CPUFREQ
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
@@ -538,7 +530,6 @@ config ARCH_DOVE
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
@@ -637,7 +628,6 @@ config ARCH_LPC32XX
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
- select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
@@ -707,7 +697,6 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
- select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
@@ -725,7 +714,6 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ATAGS
select CLKDEV_LOOKUP
@@ -746,7 +734,6 @@ config ARCH_S3C24XX
config ARCH_S3C64XX
bool "Samsung S3C64XX"
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
@@ -809,7 +796,6 @@ config ARCH_S5PC100
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select ATAGS
@@ -845,7 +831,6 @@ config ARCH_DAVINCI
config ARCH_OMAP1
bool "TI OMAP1"
depends on MMU
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
@@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
-
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-spear/Kconfig"
@@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
@@ -2109,9 +2093,7 @@ endmenu
menu "CPU Power Management"
-if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
-endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 772fec2d26ce..1e2919d43d78 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -91,6 +91,8 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index ff9637dd8d0f..5bae4731828b 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -98,6 +98,8 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e5c6a0492ca0..4e5a59ee1501 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -25,7 +25,7 @@
memory {
device_type = "memory";
- reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
};
soc {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e2d62048e198..17d9462b9fb9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -300,6 +300,7 @@ CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 59066cf0271a..536a137863cb 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
+CONFIG_CACHE_L2X0=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_SMP=y
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 9bc6db1c1348..41c839167e87 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,10 +1,9 @@
-config ARCH_BCM
+menuconfig ARCH_BCM
bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
help
This enables support for Broadcom ARM based SoC chips
-menu "Broadcom SoC Selection"
- depends on ARCH_BCM
+if ARCH_BCM
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
@@ -88,4 +87,4 @@ config ARCH_BCM_5301X
different SoC or with the older BCM47XX and BCM53XX based
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-endmenu
+endif
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 101e0f356730..2631cfc5ab0d 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_BERLIN
+menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
@@ -9,8 +9,6 @@ config ARCH_BERLIN
if ARCH_BERLIN
-menu "Marvell Berlin SoC variants"
-
config MACH_BERLIN_BG2
bool "Marvell Armada 1500 (BG2)"
select CACHE_L2X0
@@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q
select HAVE_ARM_TWD if SMP
select PINCTRL_BERLIN_BG2Q
-endmenu
-
endif
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 66838f42037f..3c22a1990ecd 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,12 +1,11 @@
-config ARCH_CNS3XXX
+menuconfig ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select PCI_DOMAINS if PCI
help
Support for Cavium Networks CNS3XXX platform.
-menu "CNS3XXX platform type"
- depends on ARCH_CNS3XXX
+if ARCH_CNS3XXX
config MACH_CNS3420VB
bool "Support for CNS3420 Validation Board"
@@ -17,4 +16,4 @@ config MACH_CNS3420VB
This is a platform with an on-board ARM11 MPCore and has support
for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-endmenu
+endif
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index db18ef866593..584e8d4e2892 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
select ARCH_DAVINCI_DA8XX
- select ARCH_HAS_CPUFREQ
select CP_INTC
config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index d58995c9a95a..8f9b66c4ac78 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,10 +7,9 @@
# Configuration options for the EXYNOS4
-config ARCH_EXYNOS
+menuconfig ARCH_EXYNOS
bool "Samsung EXYNOS" if ARCH_MULTI_V7
select ARCH_HAS_BANDGAP
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
@@ -30,8 +29,6 @@ config ARCH_EXYNOS
if ARCH_EXYNOS
-menu "SAMSUNG EXYNOS SoCs Support"
-
config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3"
select ARM_CPU_SUSPEND if PM
@@ -118,8 +115,6 @@ config SOC_EXYNOS5800
default y
depends on SOC_EXYNOS5420
-endmenu
-
config EXYNOS5420_MCPM
bool "Exynos5420 Multi-Cluster PM support"
depends on MCPM && SOC_EXYNOS5420
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 16617bdb37a9..1ee91763fa7c 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr;
void exynos_init_io(void);
void exynos_restart(enum reboot_mode mode, const char *cmd);
+void exynos_sysram_init(void);
void exynos_cpuidle_init(void);
void exynos_cpufreq_init(void);
void exynos_init_late(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 90aab4d75d08..f38cf7c110cc 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -184,6 +184,28 @@ void __init exynos_cpufreq_init(void)
platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
}
+void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+void __init exynos_sysram_init(void)
+{
+ struct device_node *node;
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_base_addr = of_iomap(node, 0);
+ break;
+ }
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_ns_base_addr = of_iomap(node, 0);
+ break;
+ }
+}
+
void __init exynos_init_late(void)
{
if (of_machine_is_compatible("samsung,exynos5440"))
@@ -198,7 +220,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
int depth, void *data)
{
struct map_desc iodesc;
- __be32 *reg;
+ const __be32 *reg;
int len;
if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
@@ -271,6 +293,13 @@ static void __init exynos_dt_machine_init(void)
}
}
+ /*
+ * This is called from smp_prepare_cpus if we've built for SMP, but
+ * we still need to set it up for PM and firmware ops if not.
+ */
+ if (!IS_ENABLED(SMP))
+ exynos_sysram_init();
+
exynos_cpuidle_init();
exynos_cpufreq_init();
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index ec02422e8499..1c8d31e39520 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,28 +32,6 @@
extern void exynos4_secondary_startup(void);
-void __iomem *sysram_base_addr;
-void __iomem *sysram_ns_base_addr;
-
-static void __init exynos_smp_prepare_sysram(void)
-{
- struct device_node *node;
-
- for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
- if (!of_device_is_available(node))
- continue;
- sysram_base_addr = of_iomap(node, 0);
- break;
- }
-
- for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
- if (!of_device_is_available(node))
- continue;
- sysram_ns_base_addr = of_iomap(node, 0);
- break;
- }
-}
-
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
@@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
+ exynos_sysram_init();
+
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
- exynos_smp_prepare_sysram();
-
/*
* Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 830b76e70250..a5960e2ac090 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,7 +1,6 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d42eab76d53..28fa2fa49e5d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,5 @@
-config ARCH_MXC
+menuconfig ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
@@ -13,8 +12,7 @@ config ARCH_MXC
help
Support for Freescale MXC/iMX-based family of processors
-menu "Freescale i.MX support"
- depends on ARCH_MXC
+if ARCH_MXC
config MXC_TZIC
bool
@@ -99,7 +97,6 @@ config SOC_IMX25
config SOC_IMX27
bool
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
@@ -124,7 +121,6 @@ config SOC_IMX35
config SOC_IMX5
bool
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select MXC_TZIC
@@ -786,4 +782,4 @@ endif
source "arch/arm/mach-imx/devices/Kconfig"
-endmenu
+endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index ba43321001d8..64f8e2564a37 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR
bool
config INTEGRATOR_IMPD1
- tristate "Include support for Integrator/IM-PD1"
+ bool "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0e870ea818c4..3ce880729cff 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = {
*/
#define IMPD1_VALID_IRQS 0x00000bffU
-static int __init impd1_probe(struct lm_device *dev)
+/*
+ * As this module is bool, it is OK to have this as __init_refok() - no
+ * probe calls will be done after the initial system bootup, as devices
+ * are discovered as part of the machine startup.
+ */
+static int __init_refok impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
int irq_base;
@@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev)
static struct lm_driver impd1_driver = {
.drv = {
.name = "impd1",
+ /*
+ * As we're dropping the probe() function, suppress driver
+ * binding from sysfs.
+ */
+ .suppress_bind_attrs = true,
},
.probe = impd1_probe,
.remove = impd1_remove,
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index f50bc936cb84..98a156afaa94 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,6 +1,7 @@
config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7
+ depends on ARM_PATCH_PHYS_VIRT
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select CLKSRC_MMIO
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 82a4ba8578a2..f49328c39bef 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MOXART
+menuconfig ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 6090b9eb00c8..4a7c250c9a30 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MVEBU
+menuconfig ARCH_MVEBU
bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
@@ -13,8 +13,6 @@ config ARCH_MVEBU
if ARCH_MVEBU
-menu "Marvell EBU SoC variants"
-
config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
@@ -84,7 +82,6 @@ config MACH_DOVE
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select KIRKWOOD_CLK
@@ -97,6 +94,4 @@ config MACH_KIRKWOOD
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-endmenu
-
endif
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 486d301f43fd..3c61096c8627 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_NOMADIK
+menuconfig ARCH_NOMADIK
bool "ST-Ericsson Nomadik"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
@@ -15,7 +15,6 @@ config ARCH_NOMADIK
Support for the Nomadik platform by ST-Ericsson
if ARCH_NOMADIK
-menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
@@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK
select I2C_ALGOBIT
select I2C_NOMADIK
-endmenu
endif
config NOMADIK_8815
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0ba482638ebf..062505345c95 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,3 +1,6 @@
+menu "TI OMAP/AM/DM/DRA Family"
+ depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
+
config ARCH_OMAP
bool
@@ -28,7 +31,6 @@ config ARCH_OMAP4
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
select ARM_GIC
- select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
@@ -80,7 +82,6 @@ config SOC_DRA7XX
config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
@@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688
endmenu
endif
+
+endmenu
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index ff029737c8f0..a373d508799a 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void);
extern void omap3_secure_sync32k_timer_init(void);
extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);
+#ifdef CONFIG_CACHE_L2X0
int omap_l2_cache_init(void);
+#else
+static inline int omap_l2_cache_init(void)
+{
+ return 0;
+}
+#endif
extern void omap5_realtime_timer_init(void);
void omap2420_init_early(void);
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index e4e505f52ba0..042f693ef423 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_SIRF
+menuconfig ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
@@ -11,7 +11,7 @@ config ARCH_SIRF
if ARCH_SIRF
-menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
+comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
@@ -37,8 +37,6 @@ config ARCH_MARCO
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
-endmenu
-
config SIRF_IRQ
bool
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fd2b99dceb89..ee5697ba05bc 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_QCOM
+menuconfig ARCH_QCOM
bool "Qualcomm Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
@@ -11,8 +11,6 @@ config ARCH_QCOM
if ARCH_QCOM
-menu "Qualcomm SoC Selection"
-
config ARCH_MSM8X60
bool "Enable support for MSM8X60"
select CLKSRC_QCOM
@@ -25,8 +23,6 @@ config ARCH_MSM8974
bool "Enable support for MSM8974"
select HAVE_ARM_ARCH_TIMER
-endmenu
-
config QCOM_SCM
bool
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 04284de7aca5..ad5316ae524e 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS
Compile in platform device definition for Samsung TouchScreen.
config S3C24XX_DMA
- bool "S3C2410 DMA support"
+ bool "S3C2410 DMA support (deprecated)"
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 3136d86b0d6e..26ca2427e53d 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -18,9 +18,9 @@ config CPU_S3C6410
Enable S3C6410 CPU support
config S3C64XX_PL080
- bool "S3C64XX DMA using generic PL08x driver"
+ def_bool DMADEVICES
+ select ARM_AMBA
select AMBA_PL08X
- select SAMSUNG_DMADEV
config S3C64XX_SETUP_SDHCI
bool
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index bb2111b3751e..26003e23796d 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,16 +9,18 @@ if ARCH_S5P64X0
config CPU_S5P6440
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 15170be97a74..c5e3a969b063 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -9,8 +9,9 @@ if ARCH_S5PC100
config CPU_S5PC100
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_EXT_INT
- select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 8c3abe521757..f60f2862856d 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,10 +11,11 @@ if ARCH_S5PV210
config CPU_S5PV210
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_EXT_INT
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
help
Enable S5PV210 CPU support
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index dbd954e61aa7..798073057e51 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,7 +1,7 @@
config ARCH_SHMOBILE
bool
-config ARCH_SHMOBILE_MULTI
+menuconfig ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
@@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI
if ARCH_SHMOBILE_MULTI
-comment "Renesas ARM SoCs System Type"
+#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
@@ -85,7 +85,6 @@ config ARCH_R8A73A4
select CPU_V7
select SH_CLK_CPG
select RENESAS_IRQC
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@@ -264,7 +263,6 @@ config MACH_KOELSCH
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 0786249b2832..90df2022276a 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -14,7 +14,6 @@ if PLAT_SPEAR
config ARCH_SPEAR13XX
bool "ST SPEAr13xx"
depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
- select ARCH_HAS_CPUFREQ
select ARM_GIC
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index abf9ee9bbc3f..7e33e9d2c42e 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,5 +1,5 @@
menuconfig ARCH_STI
- bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
+ bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
select ARM_GIC
select ARM_GLOBAL_TIMER
select PINCTRL
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index e16999e5b735..095399618ca5 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,6 +1,5 @@
-config ARCH_TEGRA
+menuconfig ARCH_TEGRA
bool "NVIDIA Tegra" if ARCH_MULTI_V7
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC
@@ -16,8 +15,7 @@ config ARCH_TEGRA
help
This enables support for NVIDIA Tegra based systems.
-menu "NVIDIA Tegra options"
- depends on ARCH_TEGRA
+if ARCH_TEGRA
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
@@ -69,4 +67,4 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some
performance parameters(priority, prefech size).
-endmenu
+endif
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index e3a96d7302e9..bc51a71394af 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_U300
+menuconfig ARCH_U300
bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
depends on MMU
select ARCH_REQUIRE_GPIOLIB
@@ -16,8 +16,6 @@ config ARCH_U300
if ARCH_U300
-menu "ST-Ericsson AB U300/U335 Platform"
-
config MACH_U300
depends on ARCH_U300
bool "U300"
@@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-endmenu
-
endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b41a42da1505..5be7c4583a93 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,9 +1,8 @@
-config ARCH_U8500
+menuconfig ARCH_U8500
bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
depends on MMU
select AB8500_CORE
select ABX500_CORE
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_754322
@@ -34,8 +33,6 @@ config UX500_SOC_DB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
-menu "Ux500 target platform (boards)"
-
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
select I2C
@@ -68,8 +65,6 @@ config UX500_AUTO_PLATFORM
a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500.
-endmenu
-
config UX500_DEBUG_UART
int "Ux500 UART to use for low-level debug"
default 2
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 90249cfc37b3..99c1f151c403 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_VEXPRESS
+menuconfig ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
@@ -37,8 +37,7 @@ config ARCH_VEXPRESS
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
-menu "Versatile Express platform type"
- depends on ARCH_VEXPRESS
+if ARCH_VEXPRESS
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
bool "Enable A5 and A9 only errata work-arounds"
@@ -65,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB
config ARCH_VEXPRESS_SPC
bool "Versatile Express Serial Power Controller (SPC)"
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select PM_OPP
help
@@ -83,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM
Support for CPU and cluster power management on Versatile Express
with a TC2 (A15x2 A7x3) big.LITTLE core tile.
-endmenu
+endif
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 08f56a41cb55..aaaa24fe4d71 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -1,6 +1,5 @@
config ARCH_VT8500
bool
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select VT8500_TIMER
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 573e0db1d0f0..0c164f81e72d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,6 +1,5 @@
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 243dfcb2ca0e..301b892d97d9 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -35,27 +35,15 @@ config SAMSUNG_PM
Base platform power management code for samsung code
if PLAT_SAMSUNG
+menu "Samsung Common options"
# boot configurations
comment "Boot options"
-config S3C_BOOT_ERROR_RESET
- bool "S3C Reboot on decompression error"
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
- bool "Force UART FIFO on during boot process"
- default y
- help
- Say Y here to force the UART FIFOs on during the kernel
- uncompressor
-
-
config S3C_LOWLEVEL_UART_PORT
int "S3C UART to use for low-level messages"
+ depends on ARCH_S3C64XX
default 0
help
Choice of which UART port to use for the low-level messages,
@@ -407,17 +395,16 @@ config SAMSUNG_PM_GPIO
Include legacy GPIO power management code for platforms not using
pinctrl-samsung driver.
-endif
-
config SAMSUNG_DMADEV
- bool
- select ARM_AMBA
+ bool "Use legacy Samsung DMA abstraction"
+ depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX
select DMADEVICES
- select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
- CPU_S5P6450 || CPU_S5P6440)
+ default y
help
Use DMA device engine for PL330 DMAC.
+endif
+
config S5P_DEV_MFC
bool
help
@@ -503,4 +490,5 @@ config DEBUG_S3C_UART
default "2" if DEBUG_S3C_UART2
default "3" if DEBUG_S3C_UART3
+endmenu
endif
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index a118ec1650fa..1f37d9870e7a 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -45,7 +45,7 @@ config OMAP_INTERCONNECT
config ARM_CCI
bool "ARM CCI driver support"
- depends on ARM
+ depends on ARM && OF && CPU_V7
help
Driver supporting the CCI cache coherent interconnect for ARM
platforms.
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
index 73068e50e56d..3250fc1df0aa 100644
--- a/drivers/misc/vexpress-syscfg.c
+++ b/drivers/misc/vexpress-syscfg.c
@@ -199,7 +199,7 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
GFP_KERNEL);
if (!func)
- return NULL;
+ return ERR_PTR(-ENOMEM);
func->syscfg = syscfg;
func->num_templates = num;
@@ -231,10 +231,14 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
func->regmap = regmap_init(dev, NULL, func,
&vexpress_syscfg_regmap_config);
- if (IS_ERR(func->regmap))
+ if (IS_ERR(func->regmap)) {
+ void *err = func->regmap;
+
kfree(func);
- else
- list_add(&func->list, &syscfg->funcs);
+ return err;
+ }
+
+ list_add(&func->list, &syscfg->funcs);
return func->regmap;
}
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index ce1743d0b679..5e343bab9458 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -44,7 +44,7 @@ config STE_MODEM_RPROC
config DA8XX_REMOTEPROC
tristate "DA8xx/OMAP-L13x remoteproc support"
depends on ARCH_DAVINCI_DA8XX
- select CMA
+ select CMA if MMU
select REMOTEPROC
select RPMSG
help