aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ezchip
AgeCommit message (Collapse)Author
2016-05-10net: nps_enet: bug fix - handle lost tx interruptsElad Kanfi
The tx interrupt is of edge type, and in case such interrupt is triggered while it is masked it will not be handled even after tx interrupts are re-enabled in the end of NAPI poll. This will cause tx network to stop in the following scenario: * Rx is being handled, hence interrupts are masked. * Tx interrupt is triggered after checking if there is some tx to handle and before re-enabling the interrupts. In this situation only rx transaction will release tx requests. In order to handle the tx that was missed( if there was one ), a NAPI reschdule was added after enabling the interrupts. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Acked-by: Gilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net: nps_enet: Tx handler synchronizationElad Kanfi
Below is a description of a possible problematic sequence. CPU-A is sending a frame and CPU-B handles the interrupt that indicates the frame was sent. CPU-B reads an invalid value of tx_packet_sent. CPU-A CPU-B ----- ----- nps_enet_send_frame . . tx_skb = skb tx_packet_sent = true order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_packet_sent == true) handle tx_skb end memory transaction (tx_packet_sent actually written) Furthermore there is a dependency between tx_skb and tx_packet_sent. There is no assurance that tx_skb contains a valid pointer at CPU B when it sees tx_packet_sent == true. Solution: Initialize tx_skb to NULL and use it to indicate that packet was sent, in this way tx_packet_sent can be removed. Add a write memory barrier after setting tx_skb in order to make sure that it is valid before HW is informed and IRQ is fired. Fixed sequence will be: CPU-A CPU-B ----- ----- tx_skb = skb wmb() . . order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_skb != NULL) handle tx_skb tx_skb = NULL Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Acked-by: Gilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03net: ezchip: adapt driver to little endian architectureLada Trimasova
Since ezchip network driver is written with big endian EZChip platform it is necessary to add support for little endian architecture. The first issue is that the order of the bits in a bit field is implementation specific. So all the bit fields are removed. Named constants are used to access necessary fields. And the second one is that network byte order is big endian. For example, data on ethernet is transmitted with most-significant octet (byte) first. So in case of little endian architecture it is important to swap data byte order when we read it from register. In case of unaligned access we can use "get_unaligned_be32" and in other case we can use function "ioread32_rep" which reads all data from register and works either with little endian or big endian architecture. And then when we are going to write data to register we need to restore byte order using the function "put_unaligned_be32" in case of unaligned access and in other case "iowrite32_rep". The last little fix is a space between type and pointer to observe coding style. Signed-off-by: Lada Trimasova <ltrimas@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tal Zilcer <talz@ezchip.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28net: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08net: ezchip: fix address space confusion in nps_enet.cArnd Bergmann
The nps_enet driver happily mixes virtual, physical and __iomem addresses, which are all different depending on the architecture and configuration. That causes a warning when building the code on ARM with LPAE mode enabled: drivers/net/ethernet/ezchip/nps_enet.c: In function 'nps_enet_send_frame': drivers/net/ethernet/ezchip/nps_enet.c:370:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] but will also fail to work for other reasons. In this patch, I'm trying to change the code to use only normal kernel pointers, which I assume is what the author actually meant: * For reading or writing a 32-bit word that may be unaligned when an SKB contains unaligned data, I'm using get_unaligned/put_unaligned() rather than memcpy_fromio/toio. * For converting a u8 pointer to a u32 pointer, I use a cast rather than the incorrect virt_to_phys. * For copying a couple of bytes from one place to another while respecting alignment, I use memcpy instead of memcpy_toio. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23NET: nps_enet: minor namespace cleanupNoam Camus
We define buf_int_enable in the minimal namespace it is used. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23NET: nps_enet: TX done acknowledge.Noam Camus
This is needed for when TX done interrupt is in "level mode". For example it is true for some simulators of this device. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23NET: nps_enet: drop control framesNoam Camus
We set controller to drop control frames and not trying to pass them on. This is only needed for debug reasons. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23NET: nps_enet: TX done race conditionNoam Camus
We need to set tx_skb pointer before send frame. If we receive interrupt before we set pointer we will try to free SKB with wrong pointer. Now we are sure that SKB pointer will never be NULL during handling TX done and check is removed. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-23NET: nps_enet: replace use of cause registerNoam Camus
When interrupt is received we read directly from control register for RX/TX instead of reading cause register since this register fails to indicate TX done when TX interrupt is "edge mode". Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23NET: Add ezchip ethernet driverNoam Camus
Simple LAN device for debug or management purposes. Device supports interrupts for RX and TX(completion). Device does not have DMA ability. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Tal Zilcer <talz@ezchip.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>