aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2016-05-12Merge tag 'at91-fixes2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "Second AT91 fix PR for 4.6" from Nicolas Ferre: - fix a regression on the clock subsystem while switching to syscon/regmap due to a stricter check of the register map. * tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC
2016-05-11ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMCBoris Brezillon
The memory range assigned to the PMC (Power Management Controller) was not including the PMC_PCR register which are used to control peripheral clocks. This was working fine thanks to the page granularity of ioremap(), but started to fail when we switched to syscon/regmap, because regmap is making sure that all accesses are falling into the reserved range. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Fixes: 863a81c3be1d ("clk: at91: make use of syscon to share PMC registers in several drivers") Cc: <stable@vger.kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-10Merge tag 'at91-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for 4.6 #1" from Nicolas Ferre: Here is a late fix for AT91. Sorry to have figure it out so late in the development cycle but we had to confirm it was an error with the documentation of two products. So, as the compatibility string is in since 4.6-rc1 and that the previous one works okay, it's a good opportunity to switch back to the one that works without introducing a intermediary bug. The revert on driver code and the removal of the useless additional compatibility string will be queued for 4.7 through NAND/MTD. * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d2: use "atmel,sama5d3-nfc" compatible for nfc
2016-05-10ARM: dts: at91: sama5d2: use "atmel,sama5d3-nfc" compatible for nfcWenyou Yang
An error in documentation of the NAND Flash Controller (NFC) led to choose another compatibility string for sama5d2 with an impact on the NAND flash ready/busy information. It was producing the error message: atmel_nand 80000000.nand: Time out to wait for interrupt: 0x08000000 and had an impact on performance. So, switch back to the classical "atmel,sama5d3-nfc" compatibility string for this SoC which gives the proper ready/busy bit information. The NAND flash driver will be updated to remove the support for this different implementation. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Romain Izard <romain.izard.pro@gmail.com> [nicolas.ferre@atmel.com: change commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-07Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "These are a number of updates to fix a few problems found in the ARM nommu code over the last couple of years, caused mostly by changes on the mmu side" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8573/1: domain: move {set,get}_domain under config guard ARM: 8572/1: nommu: change memory reserve for the vectors ARM: 8571/1: nommu: fix PMSAv7 setup
2016-05-07Merge branch 'for-4.6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "An ahci driver addition and updates to ahci port enable handling for some platform devices" * 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: add AMD Seattle platform driver ARM: dts: apq8064: add ahci ports-implemented mask ata: ahci-platform: Add ports-implemented DT bindings. libahci: save port map for forced port map
2016-05-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: byteswap: try to avoid __builtin_constant_p gcc bug lib/stackdepot: avoid to return 0 handle mm: fix kcompactd hang during memory offlining modpost: fix module autoloading for OF devices with generic compatible property proc: prevent accessing /proc/<PID>/environ until it's ready mm/zswap: provide unique zpool name mm: thp: kvm: fix memory corruption in KVM with THP enabled MAINTAINERS: fix Rajendra Nayak's address mm, cma: prevent nr_isolated_* counters from going negative mm: update min_free_kbytes from khugepaged after core initialization huge pagecache: mmap_sem is unlocked when truncation splits pmd rapidio/mport_cdev: fix uapi type definitions mm: memcontrol: let v2 cgroups follow changes in system swappiness mm: thp: correct split_huge_pages file permission
2016-05-05mm: thp: kvm: fix memory corruption in KVM with THP enabledAndrea Arcangeli
After the THP refcounting change, obtaining a compound pages from get_user_pages() no longer allows us to assume the entire compound page is immediately mappable from a secondary MMU. A secondary MMU doesn't want to call get_user_pages() more than once for each compound page, in order to know if it can map the whole compound page. So a secondary MMU needs to know from a single get_user_pages() invocation when it can map immediately the entire compound page to avoid a flood of unnecessary secondary MMU faults and spurious atomic_inc()/atomic_dec() (pages don't have to be pinned by MMU notifier users). Ideally instead of the page->_mapcount < 1 check, get_user_pages() should return the granularity of the "page" mapping in the "mm" passed to get_user_pages(). However it's non trivial change to pass the "pmd" status belonging to the "mm" walked by get_user_pages up the stack (up to the caller of get_user_pages). So the fix just checks if there is not a single pte mapping on the page returned by get_user_pages, and in turn if the caller can assume that the whole compound page is mapped in the current "mm" (in a pmd_trans_huge()). In such case the entire compound page is safe to map into the secondary MMU without additional get_user_pages() calls on the surrounding tail/head pages. In addition of being faster, not having to run other get_user_pages() calls also reduces the memory footprint of the secondary MMU fault in case the pmd split happened as result of memory pressure. Without this fix after a MADV_DONTNEED (like invoked by QEMU during postcopy live migration or balloning) or after generic swapping (with a failure in split_huge_page() that would only result in pmd splitting and not a physical page split), KVM would map the whole compound page into the shadow pagetables, despite regular faults or userfaults (like UFFDIO_COPY) may map regular pages into the primary MMU as result of the pte faults, leading to the guest mode and userland mode going out of sync and not working on the same memory at all times. Any other secondary MMU notifier manager (KVM is just one of the many MMU notifier users) will need the same information if it doesn't want to run a flood of get_user_pages_fast and it can support multiple granularity in the secondary MMU mappings, so I think it is justified to be exposed not just to KVM. The other option would be to move transparent_hugepage_adjust to mm/huge_memory.c but that currently has all kind of KVM data structures in it, so it's definitely not a cut-and-paste work, so I couldn't do a fix as cleaner as this one for 4.6. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Li, Liang Z" <liang.z.li@intel.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple last-minute fixes for ARM SoCs. Most of them are for the OMAP platforms, the rest are all for different platforms. OMAP: All dts fixes, mostly affecting voltages and pinctrl for various device drivers: - Regulator minimum voltage fixes for omap5 - ISP syscon register offset fix for omap3 - Fix regulator initial modes for n900 - Fix omap5 pinctrl wkup instance size Allwinner: Remove incorrect constraints from a dcdc1 regulator Alltera SoCFPGA: Fix compilation in thumb2 mode Samsung exynos: Fix a potential oops in the pm-domain error handling Davinci: Avoid a link error if NVMEM is disabled Renesas: Do not mark an external uart clock as disabled, to allow probing the uarts" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: davinci: only use NVMEM when available ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel ARM: dts: omap5: fix range of permitted wakeup pinmux registers ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode ARM: dts: omap3: Fix ISP syscon register offset ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges arm64: dts: r8a7795: Don't disable referenced optional scif clock ARM: EXYNOS: Properly skip unitialized parent clock in power domain on ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
2016-05-05ARM: 8573/1: domain: move {set,get}_domain under config guardVladimir Murzin
Recursive undefined instrcution falut is seen with R-class taking an exception. The reson for that is __show_regs() tries to get domain information, but domains is not available on !MMU cores, like R/M class. Fix it by puting {set,get}_domain functions under CONFIG_CPU_CP15_MMU guard and providing stubs for the case where domains is not supported. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-05-05ARM: 8572/1: nommu: change memory reserve for the vectorsJean-Philippe Brucker
Commit 19accfd3 (ARM: move vector stubs) moved the vector stubs in an additional page above the base vector one. This change wasn't taken into account by the nommu memreserve. This patch ensures that the kernel won't overwrite any vector stub on nommu. [changed the MPU side too] Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-05-05ARM: 8571/1: nommu: fix PMSAv7 setupJean-Philippe Brucker
Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) broke the support for MPU on ARMv7-R. This patch adapts the code inside CONFIG_ARM_MPU to use memblocks appropriately. MPU initialisation only uses the first memory region, and removes all subsequent ones. Because looping over all regions that need removal is inefficient, and memblock_remove already handles memory ranges, we can flatten the 'for_each_memblock' part. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-29Merge tag 'sunxi-fixes-for-4.6' of ↵Kevin Hilman
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.6 A single regulator fix * tag 'sunxi-fixes-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
2016-04-29ARM: davinci: only use NVMEM when availableArnd Bergmann
The davinci platform contains code that calls into the nvmem subsystem, but that might be a loadable module, causing a link error: arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr': :(.text+0x1088): undefined reference to `nvmem_device_read' arch/arm/mach-davinci/built-in.o: In function `read_factory_config': :(.text+0x214c): undefined reference to `nvmem_device_read' Also, when NVMEM is completely disabled, the functions fail with nonobvious error messages. This ensures we only call the API functions when the code is actually reachable from the board file, and otherwise prints a unique log message. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: bec3c11bad0e ("misc: at24: replace memory_accessor with nvmem_device_read") Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-04-28Merge tag 'renesas-fixes2-for-v4.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Second Round of Renesas ARM Based SoC Fixes for v4.6" from Simon Horman: * Don't disable referenced optional scif clock * tag 'renesas-fixes2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7795: Don't disable referenced optional scif clock ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks
2016-04-28Merge tag 'omap-for-v4.6/fixes-rc5-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.6-rc cycle. All dts fixes, mostly affecting voltages and pinctrl for various device drivers: - Regulator minimum voltage fixes for omap5 - ISP syscon register offset fix for omap3 - Fix regulator initial modes for n900 - Fix omap5 pinctrl wkup instance size * tag 'omap-for-v4.6/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: fix range of permitted wakeup pinmux registers ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode ARM: dts: omap3: Fix ISP syscon register offset ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges
2016-04-27ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernelSascha Hauer
The secondary CPU starts up in ARM mode. When the kernel is compiled in thumb2 mode we have to explicitly compile the secondary startup trampoline in ARM mode, otherwise the CPU will go to Nirvana. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-04-27Merge tag 'samsung-fixes-4.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes Fix for more theoretical than practical OOPS on first turn on of a exynos power domain, if there was no turn off before. Usually all power domains are on, so the first action is to turn off but some older bootloaders might behave differently. * tag 'samsung-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
2016-04-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the latest bug fixes for ARM SoCs, mostly addressing recent regressions. Changes are across several platforms, so I'm listing every change separately here. Regressions since 4.5: - A correction of the psci firmware DT binding, to prevent users from relying on unintended semantics - Actually getting the newly merged clock driver for some OMAP platforms to work - A revert of patches for the Qualcomm BAM, these need to be reworked for 4.7 to avoid breaking boards other than the one they were intended for - A correction for the I2C device nodes on the Socionext Uniphier platform - i.MX SDHCI was broken for non-DT platforms due to a change with the setting of the DMA mask - A revert of a patch that accidentally added a nonexisting clock on the Rensas "Porter" board - A couple of OMAP fixes that are all related to suspend after the power domain changes for dra7 - On Mediatek, revert part of the power domain initialization changes that broke mt8173-evb Fixes for older bugs: - Workaround for an "external abort" in the omap34xx suspend/resume code. - The USB1/eSATA should not be listed as an excon device on am57xx-beagle-x15 (broken since v4.0) - A v4.5 regression in the TI AM33xx and AM43XX DT specifying incorrect DMA request lines for the GPMC - The jiffies calibration on Renesas platforms was incorrect for some modern CPU cores. - A hardware errata woraround for clockdomains on TI DRA7" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems arm64: dts: uniphier: fix I2C nodes of PH1-LD20 ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" ARM: OMAP3: Fix external abort on 36xx waking from off mode idle ARM: dts: am57xx-beagle-x15: remove extcon_usb1 ARM: dts: am437x: Fix GPMC dma properties ARM: dts: am33xx: Fix GPMC dma properties Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators" ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask ARM: DRA7: clockdomain: Implement timer workaround for errata i874 ARM: OMAP: Catch callers of revision information prior to it being populated ARM: dts: dra7: Correct clock tree for sys_32k_ck ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node" ARM: dts: Add clocks for dm814x ADPLL
2016-04-26ARM: dts: omap5: fix range of permitted wakeup pinmux registersH. Nikolaus Schaller
otherwise we can't define gpio1_wk14 Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: omap3-n900: Specify peripherals LDO regulators initial modeIvaylo Dimitrov
Without that, regulators are left in the mode last set by the bootloader or by the kernel the device was rebooted from. This leads to various problems, like non-working peripherals. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: omap3: Fix ISP syscon register offsetIvaylo Dimitrov
According to the TRM, SCM CONTROL_CSIRXFE register is on offset 0x6c Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg rangesTomi Valkeinen
ldo4_reg is connected to DSS, and should always be 1.8V. However the The dts defines a range of 1.5V-1.8V, which requires somethings to set the actual voltage at runtime. Currently we set the voltage in omapdss driver. As the voltage must always be 1.8V, let's just define the range to 1.8V so that the driver doesn't need to deal with the voltage. In fact, the driver should not touch the voltage, except in the cases where the voltage needs to be changed at runtime. I presume the situation is the same for ldo1_reg, used for CSI, although I think it is not currently used in the mainline. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-26ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg rangesTomi Valkeinen
ldo4_reg is connected to DSS, and should always be 1.8V. However the The dts defines a range of 1.5V-1.8V, which requires somethings to set the actual voltage at runtime. Currently we set the voltage in omapdss driver. As the voltage must always be 1.8V, let's just define the range to 1.8V so that the driver doesn't need to deal with the voltage. In fact, the driver should not touch the voltage, except in the cases where the voltage needs to be changed at runtime. I presume the situation is the same for ldo1_reg, used for CSI, although I think it is not currently used in the mainline. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-25Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Enable dm814x and dra62x clock driver. This branch has a dependency to the clk-ti branch from the Linux clk tree for the ADPLL clock driver. Otherwise things won't keep booting properly when we flip over to use the clock driver instead of fixed clocks set up by the bootloader. * tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add clocks for dm814x ADPLL
2016-04-25ARM: EXYNOS: Properly skip unitialized parent clock in power domain onKrzysztof Kozlowski
We want to skip reparenting a clock on turning on power domain, if we do not have the parent yet. The parent is obtained when turning the domain off. However due to a typo, the loop is continued on IS_ERR() of clock being reparented, not on the IS_ERR() of the parent. Theoretically this could lead to OOPS on first turn on of a power domain, if there was no turn off before. Practically that should never happen because all power domains are turned on by default (reset value, bootloader does not turn off them usually) so the first action will be always turn off. Fixes: 29e5eea06bc1 ("ARM: EXYNOS: Get current parent clock for power domain on/off") Reported-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-23Merge tag 'qcom-fixes-for-4.6-rc2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Merge "Qualcomm Fixes for v4.6-rc2" from Andy Gross: * Revert BAM usage on MSM8974 boards * tag 'qcom-fixes-for-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node"
2016-04-22Merge tag 'imx-fixes-4.6' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: i.MX fixes for 4.6" from Shawn Guo: The i.MX fixes for 4.6: - The sdhci-esdhc-imx DMA support is broken due to commit 7b91369b4655 ("mmc: sdhci: Set DMA mask when adding host"). It requires device's dma_mask be set up properly to get DMA work. The fixing patch initializes the DMA mask to enable the access again. * tag 'imx-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask
2016-04-22Merge tag 'omap-for-v4.6/fixes-rc3' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes for v4.6-rc cycle" from Tony Lindgren: Fixes for omaps for v4.6-rc cycle: - Clockdomain fix for dra7 timer interrupts - Two fixes for GPMC EDMA binding, I missed the need for a merge with GPMC changes and EDMA changes - Fix beagle-x15 eSATA by dropping misconfigured extcon_usb1 - Fix occasional external aborts on 36xx with PM that we've been chasing for past few months. It turned out to be duplicate restore of INTC registers that can in some cases cause us to hit erratum 1.106. * tag 'omap-for-v4.6/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: Fix external abort on 36xx waking from off mode idle ARM: dts: am57xx-beagle-x15: remove extcon_usb1 ARM: dts: am437x: Fix GPMC dma properties ARM: dts: am33xx: Fix GPMC dma properties ARM: DRA7: clockdomain: Implement timer workaround for errata i874
2016-04-22Merge tag 'renesas-fixes-for-v4.6' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v4.6" from Simon Horman: Renesas ARM Based SoC Fixes for v4.6 * Correct preset_lpj calculation which may lead to too short delays * Correct handling of optional clocks on r8a7791 to restore access to the serial port the porter board * tag 'renesas-fixes-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks
2016-04-22Merge tag 'omap-for-v4.6/fixes-rc2-v2-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v4.6-rc2" from Tony Lindgren Fixes for omaps against v4.6-rc2, mostly to fix suspend for beagle-x15 that broke when we added runtime based SoC revision detection earlier. It seems suspend worked earlier as things were only partially initialized, while now we initialize things properly for dra7. Note that the "ARM: OMAP: Catch callers of revision information prior to it being populated" had to be reverted as it caused bogus warnings for other SoCs because omap initcalls bail out based on revision being set to 0 for other SoCs. These initcalls will mostly just disappear when we drop support for omap3 legacy booting. Also included is a fix for dra7 sys_32k_ck clock source that is not enabled on boot making system fall back to using emulated clock. * tag 'omap-for-v4.6/fixes-rc2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (198 commits) Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" ARM: OMAP: Catch callers of revision information prior to it being populated ARM: dts: dra7: Correct clock tree for sys_32k_ck ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen Linux 4.6-rc2 v4l2-mc: avoid warning about unused variable Convert straggling drivers to new six-argument get_user_pages() .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only net: mvneta: fix changing MTU when using per-cpu processing ...
2016-04-21Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three further fixes for ARM. Alexandre Courbot was having problems with DMA allocations with the GFP flags affecting where the tracking data was being allocated from. Vladimir Murzin noticed that the CPU feature code was not entirely correct, which can cause some features to be misreported" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8564/1: fix cpu feature extracting helper ARM: 8563/1: fix demoting HWCAP_SWP ARM: 8551/2: DMA: Fix kzalloc flags in __dma_alloc
2016-04-20ARM: shmobile: timer: Fix preset_lpj leading to too short delaysGeert Uytterhoeven
On all shmobile ARM SoCs, loop-based delays may complete early, which can be after only 1/3 (Cortex A9) or 1/2 (Cortex A7 or A15) of the minimum required time. This is caused by calculating preset_lpj based on incorrect assumptions about the number of clock cycles per loop: - All of Cortex A7, A9, and A15 run __loop_delay() at 1 loop per CPU clock cycle, - As of commit 11d4bb1bd067f9d0 ("ARM: 7907/1: lib: delay-loop: Add align directive to fix BogoMIPS calculation"), Cortex A8 runs __loop_delay() at 1 loop per 2 instead of 3 CPU clock cycles. On SoCs with Cortex A7 and/or A15 CPU cores, this went unnoticed, as delays use the ARM arch timer if available. R-Car Gen2 doesn't work if the arch timer is disabled. However, APE6 can be used without the arch timer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-20Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"Sjoerd Simons
This reverts commit 19417bd9c511 ("ARM: dts: porter: Enable SCIF_CLK frequency and pins") as according to http://elinux.org/File:R-CarM2-KOELSCH_PORTER-B_PORTER_C_Comparison.pdf the external oscillator for SCIF_CLK is not mounted on the porter boards. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-20ARM: dts: r8a7791: Don't disable referenced optional clocksSjoerd Simons
clk_get on a disabled clock node will return EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their clocks property. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them to prevent this. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-19ARM: 8564/1: fix cpu feature extracting helperVladimir Murzin
Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed quantities" introduced helper to extract signed quantities of 4-bit blocks. However, with a current code feature with value 0b1000 isn't rejected as negative. So fix the "if" condition. Reported-by: Jonathan Brawn <Jon.Brawn@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-19ARM: 8563/1: fix demoting HWCAP_SWPVladimir Murzin
Commit b8c9592 "ARM: 8318/1: treat CPU feature register fields as signed quantities" accidentally altered cpuid register used to demote HWCAP_SWP. ARM ARM says that SyncPrim_instrs bits in ID_ISAR3 should be used with SynchPrim_instrs_frac from ID_ISAR4. So, follow this rule. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-19Revert "ARM: OMAP: Catch callers of revision information prior to it being ↵Tony Lindgren
populated" This reverts commit 571afb4c8a4bbe88541364e7f6827340562f2736.
2016-04-15ARM: 8551/2: DMA: Fix kzalloc flags in __dma_allocAlexandre Courbot
Commit 19e6e5e5392b ("ARM: 8547/1: dma-mapping: store buffer information") allocates a structure meant for internal buffer management with the GFP flags of the buffer itself. This can trigger the following safeguard in the slab/slub allocator: if (unlikely(flags & GFP_SLAB_BUG_MASK)) { pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK); BUG(); } Fix this by filtering the flags that make the slab allocator unhappy. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-14ARM: OMAP3: Fix external abort on 36xx waking from off mode idleDave Gerlach
Depending on timing during the resume path from off mode on 36xx, we may see external aborts. These seem to be caused by the following: - OMAP3 Advisory 1.62 "MPU Cannot Exit from Standby" says we need to disable intc autoidle before WFI - DM3730 Advisory 1.106 "MPU Leaves MSTANDBY State Before IDLEREQ of Interrupt Controller is Released" says we need to wait before accessing intc omap3_intc_resume_idle restores the intc autoidle for all resume paths, however in the resume path from off mode only it is also being restored by omap_intc_restore_context before this call to omap3_intc_resume_idle happens. The second restore of the intc autoidle in this path is what appears to be causing the external abort so for the off mode resume path let's rely on omap_intc_restore_context to restore intc autoidle, and for all other paths let omap3_intc_resume_idle handle it as it is now. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13ARM: dts: am57xx-beagle-x15: remove extcon_usb1Roger Quadros
USB1 controller is hardwired to be used as Host only port so we don't need to check ID pin state and can get rid of extcon_usb1. This also reduces USB1 controller's and so eSATA power's dependency with EXTCON. This fixes eSATA port with multi_v7_defconfig. Cc: Franklin S Cooper Jr. <fcooper@ti.com> Cc: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> [tony@atomide.com: updated to describe what it fixes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13ARM: dts: am437x: Fix GPMC dma propertiesFranklin S Cooper Jr
This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: cce1ee000187 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13ARM: dts: am33xx: Fix GPMC dma propertiesFranklin S Cooper Jr
This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: b5e509066074 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-13Merge tag 'for-v4.6-rc/omap-fixes-b' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.6/fixes ARM: OMAP2+: clockdomain: another fix for v4.6-rc For DRA7xx platforms, add a workaround for missed timer interrupts that appears to be due to an integration bug (erratum i874) Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/omap-fixes-b-for-v4.6-rc/20160413020850/ (The DRA7xx board here has not yet been added into the testbed.)
2016-04-13Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes for -rc4, for various platforms. Nothing really substantial and worth pointing out in particular; small fixes for various bugs, see shortlog for details" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: sa1100: remove references to the defunct handhelds.org bus: uniphier-system-bus: fix condition of overlap check ARM: uniphier: drop weird sizeof() ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type ARM: OMAP: Correct interrupt type for ARM TWD ARM: DRA722: Add ID detect for Silicon Rev 2.0 ARM: dts: am43xx: fix edma memcpy channel allocation ARM: dts: AM43x-epos: Fix clk parent for synctimer ARM: OMAP2: Fix up interconnect barrier initialization for DRA7 documentation: Fix pinctrl documentation for Meson8 / Meson8b ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t arm64: dts: vulcan: Update PCI ranges ARM: u8500_defconfig: turn on the Synaptics RMI4 driver ARM: pxa: fix the number of DMA requestor lines ARM: OMAP2+: hwmod: Fix updating of sysconfig register ARM: OMAP2+: Use srst_udelay for USB on dm814x
2016-04-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM fixes: - Wrong indentation in the PMU code from the merge window - A long-time bug occuring with running ntpd on the host, candidate for stable - Properly handle (and warn about) the unsupported configuration of running on systems with less than 40 bits of PA space - More fixes to the PM and hotplug notifier stuff from the merge window x86: - leak of guest xcr0 (typically shows up as SIGILL) - new maintainer (who is sending the pull request too) - fix for merge window regression - fix for guest CPUID" Paolo Bonzini points out: "For the record, this tag is signed by me because I prepared the pull request. Further pull requests for 4.6 will be signed and sent out by Radim directly" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: mask CPUID(0xD,0x1).EAX against host value kvm: x86: do not leak guest xcr0 into host interrupt handlers KVM: MMU: fix permission_fault() KVM: new maintainer on the block arm64: KVM: unregister notifiers in hyp mode teardown path arm64: KVM: Warn when PARange is less than 40 bits KVM: arm/arm64: Handle forward time correction gracefully arm64: KVM: Add braces to multi-line if statement in virtual PMU code
2016-04-13ARM: mach-imx: sdhci-esdhc-imx: initialize DMA maskAlexander Kurz
With commit 7b91369b4655 ("mmc: sdhci: Set DMA mask when adding host") DMA access got disabled for device drivers with zero DMA mask property. sdhci-esdhc-imx got blocked from DMA access by this. Hence: initialize the DMA mask to enable access again. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-12Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 4.6 (part 1) - fix USB adress register for Linksys Armada 388 based boards - fix build warning in mvebu-mbus * tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12ARM: sa1100: remove references to the defunct handhelds.orgLinus Walleij
The website handhelds.org has been down for a long time and is likely never coming back online. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12Merge tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux into fixesOlof Johansson
ARM: pxa: fixes for v4.6 There is only a single fix for dma requestor lines initial setup, triggered by dmaengine previous fix. * tag 'pxa-fixes-v4.6' of https://github.com/rjarzmik/linux: ARM: pxa: fix the number of DMA requestor lines Signed-off-by: Olof Johansson <olof@lixom.net>