aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/arm/cci.txt
AgeCommit message (Collapse)Author
2016-02-29arm-cci: CoreLink CCI-550 PMU driverSuzuki K Poulose
Add ARM CoreLink CCI-550 cache coherent interconnect PMU driver support. The CCI-550 PMU shares all the attributes of CCI-500 PMU, except for an additional master interface (MI-6 - 0xe). CCI-550 requires the same work around as for CCI-500 to write to the PMU counter. Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-05-29arm-cci: Add CCI-500 PMU supportSuzuki K. Poulose
CCI-500 provides 8 event counters which can count any of the supported events independently. The PMU event id is a 9-bit value made of two parts. bits [8:5] - Source port 0x0-0x6 Slave Ports 0x8-0xD Master Ports 0xf Global Events to CCI 0x7,0xe Reserved bits [0:4] - Event code (specific to each type of port) The generic CCI-500 controlling interface remains the same with CCI-400. However there are some differences in the PMU event counters. - No cycle counter - Upto 8 counters(4 in CCI-400) - Each counter area is 64K(4K in CCI400) - The counter0 starts at offset 0x10000 from the base of CCI Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-27arm-cci: Get rid of secure transactions for PMU driverSuzuki K. Poulose
Avoid secure transactions while probing the CCI PMU. The existing code makes use of the Peripheral ID2 (PID2) register to determine the revision of the CCI400, which requires a secure transaction. This puts a limitation on the usage of the driver on systems running non-secure Linux(e.g, ARM64). Updated the device-tree binding for cci pmu node to add the explicit revision number for the compatible field. The supported strings are : arm,cci-400-pmu,r0 arm,cci-400-pmu,r1 arm,cci-400-pmu - DEPRECATED. See NOTE below NOTE: If the revision is not mentioned, we need to probe the cci revision, which could be fatal on a platform running non-secure. We need a reliable way to know if we can poke the CCI registers at runtime on ARM32. We depend on 'mcpm_is_available()' when it is available. mcpm_is_available() returns true only when there is a registered driver for mcpm. Otherwise, we assume that we don't have secure access, and skips probing the revision number(ARM64 case). The MCPM should figure out if it is safe to access the CCI. Unfortunately there isn't a reliable way to indicate the same via dtb. This patch doesn't address/change the current situation. It only deals with the CCI-PMU, leaving the assumptions about the secure access as it has been, prior to this patch. Cc: devicetree@vger.kernel.org Cc: Punit Agrawal <punit.agrawal@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-17ARM: dts: Document the CCI PMU DT bindingsPunit Agrawal
The CCI PMU can profile bus transactions at the master and slave interfaces of the CCI. The PMU can be used to observe an aggregated view of the bus traffic between the various components connected to the CCI. Introduce a binding for the CCI PMU. The PMU node will be a sub-node of the CCI node. Cc: devicetree@vger.kernel.org Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-17ARM: dts: Improve CCI bindings documentationPunit Agrawal
Improve the description of the value types used in the CCI binding. Cc: devicetree@vger.kernel.org Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-05-29drivers: bus: add ARM CCI supportLorenzo Pieralisi
On ARM multi-cluster systems coherency between cores running on different clusters is managed by the cache-coherent interconnect (CCI). It allows broadcasting of TLB invalidates and memory barriers and it guarantees cache coherency at system level through snooping of slave interfaces connected to it. This patch enables the basic infrastructure required in Linux to handle and programme the CCI component. Non-local variables used by the CCI management functions called by power down function calls after disabling the cache must be flushed out to main memory in advance, otherwise incoherency of those values may occur if they are sitting in the cache of some other CPU when power down functions execute. Driver code ensures that relevant data structures are flushed from inner and outer caches after the driver probe is completed. CCI slave port resources are linked to set of CPUs through bus masters phandle properties that link the interface resources to masters node in the device tree. Documentation describing the CCI DT bindings is provided with the patch. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>