path: root/Documentation
diff options
Diffstat (limited to 'Documentation')
3 files changed, 13 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 5ca79290eabf..32eaaca04d9b 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
Required properties:
- compatible: Should be "mediatek,mt7623-eth"
- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
+- interrupts: Should contain the three frame engines interrupts in numeric
+ order. These are fe_int0, fe_int1 and fe_int2.
- clocks: the clock used by the core
- clock-names: the names of the clock listed in the clocks property. These are
"ethif", "esw", "gp2", "gp1"
@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
<&ethsys CLK_ETHSYS_GP2>,
<&ethsys CLK_ETHSYS_GP1>;
clock-names = "ethif", "esw", "gp2", "gp1";
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
reset-names = "eth";
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
index 1068ffce9f91..fdde63a5419c 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -15,9 +15,10 @@ Required properties:
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
- clocks: Must contain a list of phandle and clock specifier for the rtc
- and source clocks.
-- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
- same order as the clocks property.
+ clock and in the case of a s3c6410 compatible controller, also
+ a source clock.
+- clock-names: Must contain "rtc" and for a s3c6410 compatible controller,
+ a "rtc_src" sorted in the same order as the clocks property.
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index 3f0f5ce3338b..36ea940e5bb9 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
+ - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+ proximity and set to 0 when the tool leaves detectable proximity.
+ BTN_TOOL_<name> signals the type of tool that is currently detected by the
+ hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
* ABS_MT_<name>:
- Used to describe multitouch input events. Please see