aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arc/archs-pct.txt2
-rw-r--r--Documentation/devicetree/bindings/arc/pct.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt1
-rw-r--r--Documentation/devicetree/bindings/net/mediatek-net.txt7
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt18
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt22
-rw-r--r--Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt38
-rw-r--r--Documentation/devicetree/bindings/rtc/s3c-rtc.txt7
-rw-r--r--Documentation/input/event-codes.txt4
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--Documentation/usb/gadget_multi.txt2
-rw-r--r--Documentation/x86/protection-keys.txt27
-rw-r--r--Documentation/x86/x86_64/mm.txt6
13 files changed, 80 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
index 1ae98b87c640..e4b9dcee6d41 100644
--- a/Documentation/devicetree/bindings/arc/archs-pct.txt
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -2,7 +2,7 @@
The ARC HS can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters.
+are 100+ hardware conditions dynamically mapped to up to 32 counters.
It also supports overflow interrupts.
Required properties:
diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt
index 7b9588444f20..4e874d9a38a6 100644
--- a/Documentation/devicetree/bindings/arc/pct.txt
+++ b/Documentation/devicetree/bindings/arc/pct.txt
@@ -2,7 +2,7 @@
The ARC700 can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters
+are 100+ hardware conditions dynamically mapped to up to 32 counters
Note that:
* The ARC 700 PCT does not support interrupts; although HW events may be
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index ccc62f145306..3f0cbbb8395f 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -192,7 +192,6 @@ nodes to be present and contain the properties described below.
can be one of:
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
- "arm,psci"
"arm,realview-smp"
"brcm,bcm-nsp-smp"
"brcm,brahma-b15"
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 5ca79290eabf..32eaaca04d9b 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
Required properties:
- compatible: Should be "mediatek,mt7623-eth"
- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
+- interrupts: Should contain the three frame engines interrupts in numeric
+ order. These are fe_int0, fe_int1 and fe_int2.
- clocks: the clock used by the core
- clock-names: the names of the clock listed in the clocks property. These are
"ethif", "esw", "gp2", "gp1"
@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
<&ethsys CLK_ETHSYS_GP2>,
<&ethsys CLK_ETHSYS_GP1>;
clock-names = "ethif", "esw", "gp2", "gp1";
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
+ GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
+ GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
reset-names = "eth";
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
index 50c4f9b00adf..e3b4809fbe82 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -8,15 +8,19 @@ Required properties:
of memory mapped region.
- clock-names: from common clock binding:
Required elements: "24m"
-- rockchip,grf: phandle to the syscon managing the "general register files"
- #phy-cells : from the generic PHY bindings, must be 0;
Example:
-edp_phy: edp-phy {
- compatible = "rockchip,rk3288-dp-phy";
- rockchip,grf = <&grf>;
- clocks = <&cru SCLK_EDP_24M>;
- clock-names = "24m";
- #phy-cells = <0>;
+grf: syscon@ff770000 {
+ compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
+
+...
+
+ edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ clocks = <&cru SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 61916f15a949..555cb0f40690 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -3,17 +3,23 @@ Rockchip EMMC PHY
Required properties:
- compatible: rockchip,rk3399-emmc-phy
- - rockchip,grf : phandle to the syscon managing the "general
- register files"
- #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
register files"
Example:
-emmcphy: phy {
- compatible = "rockchip,rk3399-emmc-phy";
- rockchip,grf = <&grf>;
- reg = <0xf780>;
- #phy-cells = <0>;
+
+grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+...
+
+ emmcphy: phy@f780 {
+ compatible = "rockchip,rk3399-emmc-phy";
+ reg = <0xf780 0x20>;
+ #phy-cells = <0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 3f6a524cc5ff..32f4a2d6d0b3 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -1,13 +1,16 @@
== Amlogic Meson pinmux controller ==
Required properties for the root node:
- - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
+ - compatible: one of "amlogic,meson8-cbus-pinctrl"
+ "amlogic,meson8b-cbus-pinctrl"
+ "amlogic,meson8-aobus-pinctrl"
+ "amlogic,meson8b-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
-The 2 power domains of the controller (regular and always-on) are
-represented as sub-nodes and each of them acts as a GPIO controller.
+The GPIO bank for the controller is represented as a sub-node and it acts as a
+GPIO controller.
Required properties for sub-nodes are:
- reg: should contain address and size for mux, pull-enable, pull and
@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
-Valid sub-node names are:
- - "banks" for the regular domain
- - "ao-bank" for the always-on domain
-
=== Other sub-nodes ===
Child nodes without the "gpio-controller" represent some desired
@@ -45,7 +44,7 @@ pinctrl-bindings.txt
=== Example ===
pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-pinctrl";
+ compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -61,15 +60,6 @@ pinctrl-bindings.txt
#gpio-cells = <2>;
};
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
nand {
mux {
groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
@@ -79,18 +69,4 @@ pinctrl-bindings.txt
function = "nand";
};
};
-
- uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a",
- "uart_cts_ao_a", "uart_rts_ao_a";
- function = "uart_ao";
- };
-
- conf {
- pins = "GPIOAO_0", "GPIOAO_1",
- "GPIOAO_2", "GPIOAO_3";
- bias-disable;
- };
- };
};
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
index 1068ffce9f91..fdde63a5419c 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -15,9 +15,10 @@ Required properties:
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
- clocks: Must contain a list of phandle and clock specifier for the rtc
- and source clocks.
-- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
- same order as the clocks property.
+ clock and in the case of a s3c6410 compatible controller, also
+ a source clock.
+- clock-names: Must contain "rtc" and for a s3c6410 compatible controller,
+ a "rtc_src" sorted in the same order as the clocks property.
Example:
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index 3f0f5ce3338b..36ea940e5bb9 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
+ - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+ proximity and set to 0 when the tool leaves detectable proximity.
+ BTN_TOOL_<name> signals the type of tool that is currently detected by the
+ hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
* ABS_MT_<name>:
- Used to describe multitouch input events. Please see
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ecc74fa4bfde..0b3de80ec8f6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sector if the number is odd);
i = IGNORE_DEVICE (don't bind to this
device);
+ j = NO_REPORT_LUNS (don't use report luns
+ command, uas only);
l = NOT_LOCKABLE (don't try to lock and
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
index 7d66a8636cb5..5faf514047e9 100644
--- a/Documentation/usb/gadget_multi.txt
+++ b/Documentation/usb/gadget_multi.txt
@@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met:
First of all, Windows need to detect the gadget as an USB composite
gadget which on its own have some conditions[4]. If they are met,
Windows lets USB Generic Parent Driver[5] handle the device which then
-tries to much drivers for each individual interface (sort of, don't
+tries to match drivers for each individual interface (sort of, don't
get into too many details).
The good news is: you do not have to worry about most of the
diff --git a/Documentation/x86/protection-keys.txt b/Documentation/x86/protection-keys.txt
new file mode 100644
index 000000000000..c281ded1ba16
--- /dev/null
+++ b/Documentation/x86/protection-keys.txt
@@ -0,0 +1,27 @@
+Memory Protection Keys for Userspace (PKU aka PKEYs) is a CPU feature
+which will be found on future Intel CPUs.
+
+Memory Protection Keys provides a mechanism for enforcing page-based
+protections, but without requiring modification of the page tables
+when an application changes protection domains. It works by
+dedicating 4 previously ignored bits in each page table entry to a
+"protection key", giving 16 possible keys.
+
+There is also a new user-accessible register (PKRU) with two separate
+bits (Access Disable and Write Disable) for each key. Being a CPU
+register, PKRU is inherently thread-local, potentially giving each
+thread a different set of protections from every other thread.
+
+There are two new instructions (RDPKRU/WRPKRU) for reading and writing
+to the new register. The feature is only available in 64-bit mode,
+even though there is theoretically space in the PAE PTEs. These
+permissions are enforced on data access only and have no effect on
+instruction fetches.
+
+=========================== Config Option ===========================
+
+This config option adds approximately 1.5kb of text. and 50 bytes of
+data to the executable. A workload which does large O_DIRECT reads
+of holes in XFS files was run to exercise get_user_pages_fast(). No
+performance delta was observed with the config option
+enabled or disabled.
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
index c518dce7da4d..5aa738346062 100644
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -19,7 +19,7 @@ ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
-ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
+ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
@@ -31,8 +31,8 @@ vmalloc space is lazily synchronized into the different PML4 pages of
the processes using the page fault handler, with init_level4_pgt as
reference.
-Current X86-64 implementations only support 40 bits of address space,
-but we support up to 46 bits. This expands into MBZ space in the page tables.
+Current X86-64 implementations support up to 46 bits of address space (64 TB),
+which is our current limit. This expands into MBZ space in the page tables.
We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
memory window (this size is arbitrary, it can be raised later if needed).