path: root/bl31/bl31_main.c
AgeCommit message (Collapse)Author
2014-06-24Remove all checkpatch errors from codebaseJuan Castillo
Exclude stdlib files because they do not follow kernel code style. Fixes ARM-software/tf-issues#73 Change-Id: I4cfafa38ab436f5ab22c277cb38f884346a267ab
2014-06-23Initialise CPU contexts from entry_point_infoAndrew Thoelke
Consolidate all BL3-1 CPU context initialization for cold boot, PSCI and SPDs into two functions: * The first uses entry_point_info to initialize the relevant cpu_context for first entry into a lower exception level on a CPU * The second populates the EL1 and EL2 system registers as needed from the cpu_context to ensure correct entry into the lower EL This patch alters the way that BL3-1 determines which exception level is used when first entering EL1 or EL2 during cold boot - this is now fully determined by the SPSR value in the entry_point_info for BL3-3, as set up by the platform code in BL2 (or otherwise provided to BL3-1). In the situation that EL1 (or svc mode) is selected for a processor that supports EL2, the context management code will now configure all essential EL2 register state to ensure correct execution of EL1. This allows the platform code to run non-secure EL1 payloads directly without requiring a small EL2 stub or OS loader. Change-Id: If9fbb2417e82d2226e47568203d5a369f39d3b0f
2014-06-17Remove early_exceptions from BL3-1Andrew Thoelke
The crash reporting support and early initialisation of the cpu_data allow the runtime_exception vectors to be used from the start in BL3-1, removing the need for the additional early_exception vectors and 2KB of code from BL3-1. Change-Id: I5f8997dabbaafd8935a7455910b7db174a25d871
2014-06-16Per-cpu data cache restructuringAndrew Thoelke
This patch prepares the per-cpu pointer cache for wider use by: * renaming the structure to cpu_data and placing in new header * providing accessors for this CPU, or other CPUs * splitting the initialization of the TPIDR pointer from the initialization of the cpu_data content * moving the crash stack initialization to a crash stack function * setting the TPIDR pointer very early during boot Change-Id: Icef9004ff88f8eb241d48c14be3158087d7e49a3
2014-06-11Provide cm_get/set_context() for current CPUAndrew Thoelke
All callers of cm_get_context() pass the calling CPU MPIDR to the function. Providing a specialised version for the current CPU results in a reduction in code size and better readability. The current function has been renamed to cm_get_context_by_mpidr() and the existing name is now used for the current-CPU version. The same treatment has been done to cm_set_context(), although only both forms are used at present in the PSCI and TSPD code. Change-Id: I91cb0c2f7bfcb950a045dbd9ff7595751c0c0ffb
2014-05-28Pass the args to the BL3-3 entrypointVikram Kanigiri
At present the arguments for BL3-3 in the entry_point_info structure are not being transferred to X0-X7 before starting execution of this image This patch saves the args for BL3-3 into cpu context used for its entry Fixes ARM-software/tf-issues#172 Change-Id: I001b4b9bff6a264336f0d01d377619ae719f928b
2014-05-27Further renames of platform porting functionsDan Handley
Rename the ic_* platform porting functions to plat_ic_* to be consistent with the other functions in platform.h. Also rename bl31_get_next_image_info() to bl31_plat_get_next_image_ep_info() and remove the duplicate declaration in bl31.h. Change-Id: I4851842069d3cff14c0a468daacc0a891a7ede84
2014-05-23Move BL porting functions into platform.hDan Handley
Some platform porting functions were in BL specific header files. These have been moved to platform.h so that all porting functions are in the same place. The functions are now grouped by BL. Obsolete BL headers files have been removed. Also, the weak declaration of the init_bl2_mem_layout() function has been moved out the header file and into the source file (bl_common.c) using the more succinct #pragma syntax. This mitigates the risk of 2 weak definitions being created and the wrong one being picked up by the compiler. Change-Id: Ib19934939fd755f3e5a5a5bceec88da684308a83
2014-05-23Merge pull request #99 from vikramkanigiri:vk/tf-issues-133_V3Andrew Thoelke
2014-05-22Rework memory information passing to BL3-x imagesVikram Kanigiri
The issues addressed in this patch are: 1. Remove meminfo_t from the common interfaces in BL3-x, expecting that platform code will find a suitable mechanism to determine the memory extents in these images and provide it to the BL3-x images. 2. Remove meminfo_t and bl31_plat_params_t from all FVP BL3-x code as the images use link-time information to determine memory extents. meminfo_t is still used by common interface in BL1/BL2 for loading images Change-Id: I4e825ebf6f515b59d84dc2bdddf6edbf15e2d60f
2014-05-22Populate BL31 input parameters as per new specVikram Kanigiri
This patch is based on spec published at https://github.com/ARM-software/tf-issues/issues/133 It rearranges the bl31_args struct into bl31_params and bl31_plat_params which provide the information needed for Trusted firmware and platform specific data via x0 and x1 On the FVP platform BL3-1 params and BL3-1 plat params and its constituents are stored at the start of TZDRAM. The information about memory availability and size for BL3-1, BL3-2 and BL3-3 is moved into platform specific data. Change-Id: I8b32057a3d0dd3968ea26c2541a0714177820da9
2014-05-22Merge pull request #83 from athoelke/at/tf-issues-126Andrew Thoelke
Set SCR_EL3.RW correctly before exiting bl31_main
2014-05-16Set SCR_EL3.RW correctly before exiting bl31_mainAndrew Thoelke
SCR_EL3.RW was not updated immediately before exiting bl31_main() and running BL3-3. If a AArch32 Secure-EL1 Payload had just been initialised, then the SCR_EL3.RW bit would be left indicating a 32-bit BL3-3, which may not be correct. This patch explicitly sets SCR_EL3.RW appropriately based on the provided SPSR_EL3 value for the BL3-3 image. Fixes ARM-software/tf-issues#126 Change-Id: Ic7716fe8bc87e577c4bfaeb46702e88deedd9895
2014-05-16Rework BL3-1 unhandled exception handling and reportingSoby Mathew
This patch implements the register reporting when unhandled exceptions are taken in BL3-1. Unhandled exceptions will result in a dump of registers to the console, before halting execution by that CPU. The Crash Stack, previously called the Exception Stack, is used for this activity. This stack is used to preserve the CPU context and runtime stack contents for debugging and analysis. This also introduces the per_cpu_ptr_cache, referenced by tpidr_el3, to provide easy access to some of BL3-1 per-cpu data structures. Initially, this is used to provide a pointer to the Crash stack. panic() now prints the the error file and line number in Debug mode and prints the PC value in release mode. The Exception Stack is renamed to Crash Stack with this patch. The original intention of exception stack is no longer valid since we intend to support several valid exceptions like IRQ and FIQ in the trusted firmware context. This stack is now utilized for dumping and reporting the system state when a crash happens and hence the rename. Fixes ARM-software/tf-issues#79 Improve reporting of unhandled exception Change-Id: I260791dc05536b78547412d147193cdccae7811a
2014-05-07Correct usage of data and instruction barriersAndrew Thoelke
The current code does not always use data and instruction barriers as required by the architecture and frequently uses barriers excessively due to their inclusion in all of the write_*() helper functions. Barriers should be used explicitly in assembler or C code when modifying processor state that requires the barriers in order to enable review of correctness of the code. This patch removes the barriers from the helper functions and introduces them as necessary elsewhere in the code. PORTING NOTE: check any port of Trusted Firmware for use of system register helper functions for reliance on the previous barrier behaviour and add explicit barriers as necessary. Fixes ARM-software/tf-issues#92 Change-Id: Ie63e187404ff10e0bdcb39292dd9066cb84c53bf
2014-05-06Remove variables from .data sectionDan Handley
Update code base to remove variables from the .data section, mainly by using const static data where possible and adding the const specifier as required. Most changes are to the IO subsystem, including the framework APIs. The FVP power management code is also affected. Delay initialization of the global static variable, next_image_type in bl31_main.c, until it is realy needed. Doing this moves the variable from the .data to the .bss section. Also review the IO interface for inconsistencies, using uintptr_t where possible instead of void *. Remove the io_handle and io_dev_handle typedefs, which were unnecessary, replacing instances with uintptr_t. Fixes ARM-software/tf-issues#107. Change-Id: I085a62197c82410b566e4698e5590063563ed304
2014-05-06Reduce deep nesting of header filesDan Handley
Reduce the number of header files included from other header files as much as possible without splitting the files. Use forward declarations where possible. This allows removal of some unnecessary "#ifndef __ASSEMBLY__" statements. Also, review the .c and .S files for which header files really need including and reorder the #include statements alphabetically. Fixes ARM-software/tf-issues#31 Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e
2014-05-06Always use named structs in header filesDan Handley
Add tag names to all unnamed structs in header files. This allows forward declaration of structs, which is necessary to reduce header file nesting (to be implemented in a subsequent commit). Also change the typedef names across the codebase to use the _t suffix to be more conformant with the Linux coding style. The coding style actually prefers us not to use typedefs at all but this is considered a step too far for Trusted Firmware. Also change the IO framework structs defintions to use typedef'd structs to be consistent with the rest of the codebase. Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f
2014-03-05Generate build time and date message at link time.Jon Medhurst
So it updates each time a bootloader changes, not just when bl*_main.c files are recompiled. Fixes ARM-software/tf-issues#33 Change-Id: Ie8e1a7bd7e1913d2e96ac268606284f76af8c5ab Signed-off-by: Jon Medhurst <tixy@linaro.org>
2014-02-26Implement late binding for runtime hooksJeenu Viswambharan
At present SPD power management hooks and BL3-2 entry are implemented using weak references. This would have the handlers bound and registered with the core framework at build time, but leaves them dangling if a service fails to initialize at runtime. This patch replaces implementation by requiring runtime handlers to register power management and deferred initialization hooks with the core framework at runtime. The runtime services are to register the hooks only as the last step, after having all states successfully initialized. Change-Id: Ibe788a2a381ef39aec1d4af5ba02376e67269782
2014-02-20Add support for BL3-2 in BL3-1Achin Gupta
This patch adds the following support to the BL3-1 stage: 1. BL3-1 allows runtime services to specify and determine the security state of the next image after BL3-1. This has been done by adding the `bl31_set_next_image_type()` & `bl31_get_next_image_type()` apis. The default security state is non-secure. The platform api `bl31_get_next_image_info()` has been modified to let the platform decide which is the next image in the desired security state. 2. BL3-1 exports the `bl31_prepare_next_image_entry()` function to program entry into the target security state. It uses the apis introduced in 1. to do so. 3. BL3-1 reads the information populated by BL2 about the BL3-2 image into its internal data structures. 4. BL3-1 introduces a weakly defined reference `bl32_init()` to allow initialisation of a BL3-2 image. A runtime service like the Secure payload dispatcher will define this function if present. Change-Id: Icc46dcdb9e475ce6575dd3f9a5dc7a48a83d21d1
2014-02-17Add support for handling runtime service requestsJeenu Viswambharan
This patch uses the reworked exception handling support to handle runtime service requests through SMCs following the SMC calling convention. This is a giant commit since all the changes are inter-related. It does the following: 1. Replace the old exception handling mechanism with the new one 2. Enforce that SP_EL0 is used C runtime stacks. 3. Ensures that the cold and warm boot paths use the 'cpu_context' structure to program an ERET into the next lower EL. 4. Ensures that SP_EL3 always points to the next 'cpu_context' structure prior to an ERET into the next lower EL 5. Introduces a PSCI SMC handler which completes the use of PSCI as a runtime service Change-Id: I661797f834c0803d2c674d20f504df1b04c2b852 Co-authored-by: Achin Gupta <achin.gupta@arm.com>
2014-02-17Add runtime services frameworkAchin Gupta
This patch introduces the framework to enable registration and initialisation of runtime services. PSCI is registered and initialised as a runtime service. Handling of runtime service requests will be implemented in subsequent patches. Change-Id: Id21e7ddc5a33d42b7d6e455b41155fc5441a9547
2014-02-17Add context management libraryAchin Gupta
This patch adds support for a cpu context management library. This library will be used to: 1. Share pointers to secure and non-secure state cpu contexts between runtime services e.g. PSCI and Secure Payload Dispatcher services 2. Set SP_EL3 to a context structure which will be used for programming an ERET into a lower EL 3. Provide wrapper functions to save and restore EL3 & EL1 state. These functions will in turn use the helper functions in context.S Change-Id: I655eeef83dcd2a0c6f2eb2ac23efab866ac83ca0
2014-01-17Update year in copyright text to 2014Dan Handley
Change-Id: Ic7fb61aabae1d515b9e6baf3dd003807ff42da60
2013-12-12Make BL31's ns_entry_info a single-cpu areaSandrine Bailleux
ns_entry_info used to be a per-cpu array. This is a waste of space because it is only accessed by the primary CPU on the cold boot path. This patch reduces ns_entry_info to a single-cpu area. Change-Id: I647c70c4e76069560f1aaad37a1d5910f56fba4c
2013-12-05Enable third party contributionsDan Handley
- Add instructions for contributing to ARM Trusted Firmware. - Update copyright text in all files to acknowledge contributors. Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5
2013-10-25ARMv8 Trusted Firmware release v0.2v0.2Achin Gupta