aboutsummaryrefslogtreecommitdiff
path: root/net/wireless/wext-compat.c
AgeCommit message (Collapse)Author
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-13net: wireless: kerneldoc fixesAndrew Lunn
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01cfg80211: initialize on-stack chandefsJohannes Berg
In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: always shut down on HW rfkillJohannes Berg
When the RFKILL subsystem isn't available, then rfkill_blocked() always returns false. In the case of hardware rfkill this will be wrong though, as if the hardware reported being killed then it cannot operate any longer. Since we only ever call the rfkill_sync work in this case, just rename it to rfkill_block and always pass "true" for the blocked parameter, rather than passing rfkill_blocked(). We rely on the underlying driver to still reject any new attempt to bring up the device by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: remove redundant zero check on variable 'changed'Colin Ian King
The zero check on variable changed is redundant as it must be between 1 and 3 at the end of the proceeding if statement block. Remove the redundant check. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/wireless/wext-compat.c:1327:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/wireless/wext-compat.c:1341:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-01cfg80211: fix wext-compat memory leakStefan Seyfried
cfg80211_wext_giwrate and sinfo.pertid might allocate sinfo.pertid via rdev_get_station(), but never release it. Fix that. Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> [johannes: fix error path, use cfg80211_sinfo_release_content(), add Fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29cfg80211: use BIT_ULL for NL80211_STA_INFO_* attribute typesOmer Efrat
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in cfg80211 by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-18cfg80211: fix station info handling bugsJohannes Berg
Fix two places where the structure isn't initialized to zero, and thus can't be filled properly by the driver. Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 9930380f0bd8 ("cfg80211: implement IWRATE") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-13cfg80211: move add/change interface monitor flags into paramsJohannes Berg
Instead passing both flags, which can be NULL, and vif_params, which are never NULL, move the flags into the vif_params and use BIT(0), which is invalid from userspace, to indicate that the flags were changed. While updating all drivers, fix a small bug in wil6210 where it was setting the flags to 0 instead of leaving them unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: Add support for static WEP in the driverDavid Spinadel
Add support for drivers that implement static WEP internally, i.e. expose connection keys to the driver in connect flow and don't upload the keys after the connection. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-28cfg80211: wext: really don't store non-WEP keysJohannes Berg
Jouni reported that during (repeated) wext_pmf test runs (from the wpa_supplicant hwsim test suite) the kernel crashes. The reason is that after the key is set, the wext code still unnecessarily stores it into the key cache. Despite smatch pointing out an overflow, I failed to identify the possibility for this in the code and missed it during development of the earlier patch series. In order to fix this, simply check that we never store anything but WEP keys into the cache, adding a comment as to why that's enough. Also, since the cache is still allocated early even if it won't be used in many cases, add a comment explaining why - otherwise we'd have to roll back key settings to the driver in case of allocation failures, which is far more difficult. Fixes: 89b706fb28e4 ("cfg80211: reduce connect key caching struct size") Reported-by: Jouni Malinen <j@w1.fi> Bisected-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-13cfg80211: reduce connect key caching struct sizeJohannes Berg
After the previous patches, connect keys can only (correctly) be used for storing static WEP keys. Therefore, remove all the data for dealing with key index 4/5 and reduce the size of the key material to the maximum for WEP keys. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-13cfg80211: wext: only allow WEP keys to be configured before connectedJohannes Berg
When not connected, anything but WEP keys shouldn't be allowed to be configured for later - only static WEP keys make sense at this point. Change wext to reject anything else just like nl80211 does. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-02wext: remove a/b/g/n from SIOCGIWNAMEJohannes Berg
Since a/b/g/n no longer exist as spec amendements and VHT (ex 802.11ac) wasn't handled at all, it's better to just remove the amendment strings to avoid confusion. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09cfg80211: wext: clear sinfo struct before calling driverJohannes Berg
Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691 Cc: stable@vger.kernel.org Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28cfg80211-wext: export symbols only when neededJohannes Berg
When a fully converted cfg80211 driver needs cfg80211-wext for userspace API purposes, the symbols need not be exported. When other drivers (orinoco/hermes or ipw2200) are enabled, they do need the symbols exported as they use them directly. Make those drivers select a new CFG80211_WEXT_EXPORT Kconfig symbol (instead of just CFG80211_WEXT) and export the functions only if requested - this saves about 1/2k due to the size of EXPORT_SYMBOL() itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: clear wext keys when freeing and removing themJohannes Berg
When freeing the keys stored for wireless extensions, clear the memory to avoid having the key material stick around in memory "forever". Similarly, when userspace overwrites a key, actually clear it instead of just setting the key length to zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change wiphy_to_dev function nameZhao, Gang
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-10cfg80211: remove unused wiphy argument from cfg80211_wext_freq()Zhao, Gang
cfg80211_wext_freq() is declared in wext-compat.h, but its parameter struct wiphy's declaration is not included there. As the parameter isn't used, just remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> [remove parameter instead of changing to netdev] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-09cfg80211: add sanity check for retry limit in wext-compatUjjal Roy
Block setting the wrong values through iwconfig retry command. Add sanity checking before sending the retry limit to the driver. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-06cfg80211: fix wext-compat for getting retry valueUjjal Roy
While getting the retry limit, wext-compat returns the value without updating the flag for retry->flags is 0. Also in this case, it updates long retry flag when short and long retry value are unequal. So, iwconfig never showing "Retry short limit" and showing "Retry long limit" when both values are unequal. Updated the flags and corrected the condition properly. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25cfg80211: vastly simplify lockingJohannes Berg
Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07wext: explicitly cast -110 to u8Johannes Berg
This doesn't generate any different code, but will suppress a spurious smatch warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26nl80211/cfg80211: support VHT channel configurationJohannes Berg
Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: pass a channel definition structJohannes Berg
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30cfg80211: allow per interface TX power settingJohannes Berg
The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add wrappers for registered_device_opsHila Gonen
This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13cfg80211/mac80211: re-add get_channel operationJohannes Berg
This essentially reverts commit 2e165b818456 but introduces the get_channel operation with a new wireless_dev argument so that you can retrieve the channel per interface. This is necessary as even though we can track all interface channels (except monitor) we can't track the channel type used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211/mac80211: remove .get_channelMichal Kazior
We do not need it anymore since cfg80211 tracks monitor channel and monitor channel type. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to join_mesh functionJohannes Berg
Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: disallow setting channel on WDS interfacesJohannes Berg
If it worked (Felix says it doesn't right now), the typical use-case for WDS interfaces would be to be slaved to AP mode interfaces. Therefore, it isn't necessary to set the channel on WDS interfaces. As they don't support powersave or anything like that, they also couldn't use a different channel anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13cfg80211: Add channel information to NL80211_CMD_GET_INTERFACEPontus Fuchs
If the current channel is known, add frequency and channel type to NL80211_CMD_GET_INTERFACE. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: include/net/bluetooth/bluetooth.h
2011-11-11mac80211/cfg80211: report monitor channel in wireless extensionsJohannes Berg
Just add API to get the channel & report it. Trivial really. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-08cfg80211: remove unused wext handler exportsJohannes Berg
A lot of code is dedicated to giving drivers the ability to use cfg80211's wext handlers without completely converting. However, only orinoco is currently using this, and it is only partially using it. We reduce the size of both the source and binary by removing those that nobody needs. If a driver shows up that needs it during conversion, we can add back those that are needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08cfg80211: split wext compatibility to separate headerJohannes Berg
A lot of drivers erroneously use wext constants and don't notice since cfg80211.h includes them. Make this more split up so drivers needing wext compatibility from cfg80211 need to explicitly include that from cfg80211-wext.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
2011-02-21fix cfg80211_wext_siwfreq lock ordering...Daniel J Blueman
I previously managed to reproduce a hang while scanning wireless channels (reproducible with airodump-ng hopping channels); subsequent lockdep instrumentation revealed a lock ordering issue. Without knowing the design intent, it looks like the locks should be taken in reverse order; please comment. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc5-341cd #4 ------------------------------------------------------- airodump-ng/15445 is trying to acquire lock: (&rdev->devlist_mtx){+.+.+.}, at: [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100 but task is already holding lock: (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wdev->mtx){+.+.+.}: [<ffffffff810a79d6>] lock_acquire+0xc6/0x280 [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0 [<ffffffff81696080>] cfg80211_netdev_notifier_call+0x430/0x5f0 [<ffffffff8109351b>] notifier_call_chain+0x8b/0x100 [<ffffffff810935b1>] raw_notifier_call_chain+0x11/0x20 [<ffffffff81576d92>] call_netdevice_notifiers+0x32/0x60 [<ffffffff815771a4>] __dev_notify_flags+0x34/0x80 [<ffffffff81577230>] dev_change_flags+0x40/0x70 [<ffffffff8158587c>] do_setlink+0x1fc/0x8d0 [<ffffffff81586042>] rtnl_setlink+0xf2/0x140 [<ffffffff81586923>] rtnetlink_rcv_msg+0x163/0x270 [<ffffffff8159d741>] netlink_rcv_skb+0xa1/0xd0 [<ffffffff815867b0>] rtnetlink_rcv+0x20/0x30 [<ffffffff8159d39a>] netlink_unicast+0x2ba/0x300 [<ffffffff8159dd57>] netlink_sendmsg+0x267/0x3e0 [<ffffffff8155e364>] sock_sendmsg+0xe4/0x110 [<ffffffff8155f3a3>] sys_sendmsg+0x253/0x3b0 [<ffffffff81003192>] system_call_fastpath+0x16/0x1b -> #0 (&rdev->devlist_mtx){+.+.+.}: [<ffffffff810a7222>] __lock_acquire+0x1622/0x1d10 [<ffffffff810a79d6>] lock_acquire+0xc6/0x280 [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0 [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff816b2fad>] ioctl_standard_call+0x5d/0xd0 [<ffffffff816b3223>] T.808+0x163/0x170 [<ffffffff816b326a>] wext_handle_ioctl+0x3a/0x90 [<ffffffff815798d2>] dev_ioctl+0x6f2/0x830 [<ffffffff8155cf3d>] sock_ioctl+0xfd/0x290 [<ffffffff8117dffd>] do_vfs_ioctl+0x9d/0x590 [<ffffffff8117e53a>] sys_ioctl+0x4a/0x80 [<ffffffff81003192>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 2 locks held by airodump-ng/15445: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81586782>] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100 stack backtrace: Pid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4 Call Trace: [<ffffffff810a3f0a>] ? print_circular_bug+0xfa/0x100 [<ffffffff810a7222>] ? __lock_acquire+0x1622/0x1d10 [<ffffffff810a1f99>] ? trace_hardirqs_off_caller+0x29/0xc0 [<ffffffff810a79d6>] ? lock_acquire+0xc6/0x280 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90 [<ffffffff816d6bce>] ? mutex_lock_nested+0x6e/0x4b0 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff816b2fad>] ? ioctl_standard_call+0x5d/0xd0 [<ffffffff8157818b>] ? __dev_get_by_name+0x9b/0xc0 [<ffffffff816b2f50>] ? ioctl_standard_call+0x0/0xd0 [<ffffffff816b3223>] ? T.808+0x163/0x170 [<ffffffff8112ddf2>] ? might_fault+0x72/0xd0 [<ffffffff816b326a>] ? wext_handle_ioctl+0x3a/0x90 [<ffffffff8112de3b>] ? might_fault+0xbb/0xd0 [<ffffffff815798d2>] ? dev_ioctl+0x6f2/0x830 [<ffffffff810a1bae>] ? put_lock_stats+0xe/0x40 [<ffffffff810a1c8c>] ? lock_release_holdtime+0xac/0x150 [<ffffffff8155cf3d>] ? sock_ioctl+0xfd/0x290 [<ffffffff8117dffd>] ? do_vfs_ioctl+0x9d/0x590 [<ffffffff8116c8ff>] ? fget_light+0x1df/0x3c0 [<ffffffff8117e53a>] ? sys_ioctl+0x4a/0x80 [<ffffffff81003192>] ? system_call_fastpath+0x16/0x1b Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21cfg80211: Extend channel to frequency mapping for 802.11jBruno Randolf
Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13cfg80211/nl80211: separate unicast/multicast default TX keysJohannes Berg
Allow userspace to specify that a given key is default only for unicast and/or multicast transmissions. Only WEP keys are for both, WPA/RSN keys set here are GTKs for multicast only. For more future flexibility, allow to specify all combiations. Wireless extensions can only set both so use nl80211; WEP keys (connect keys) must be set as default for both (but 802.1X WEP is still possible). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11wireless: Set some stats used by /proc/net/wireless (wext)Ben Greear
Some stats for /proc/net/wireless (and wext in general) are not being set. This patch addresses a few of those with values easily obtained from mac80211 core. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06cfg80211/mac80211: allow per-station GTKsJohannes Berg
This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30wireless extensions: fix kernel heap content leakJohannes Berg
Wireless extensions have an unfortunate, undocumented requirement which requires drivers to always fill iwp->length when returning a successful status. When a driver doesn't do this, it leads to a kernel heap content leak when userspace offers a larger buffer than would have been necessary. Arguably, this is a driver bug, as it should, if it returns 0, fill iwp->length, even if it separately indicated that the buffer contents was not valid. However, we can also at least avoid the memory content leak if the driver doesn't do this by setting the iwp length to max_tokens, which then reflects how big the buffer is that the driver may fill, regardless of how big the userspace buffer is. To illustrate the point, this patch also fixes a corresponding cfg80211 bug (since this requirement isn't documented nor was ever pointed out by anyone during code review, I don't trust all drivers nor all cfg80211 handlers to implement it correctly). Cc: stable@kernel.org [all the way back] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20wireless: correct sparse warning in wext-compat.cJohn W. Linville
CHECK net/wireless/wext-compat.c net/wireless/wext-compat.c:1434:5: warning: symbol 'cfg80211_wext_siwpmksa' was not declared. Should it be static? Add declaration in cfg80211.h. Also add an EXPORT_SYMBOL_GPL, since all the peer functions have it. Signed-off-by: John W. Linville <linville@tuxdriver.com>