aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2014-08-28Merge tag 'mfd-fixes-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd fixes from Lee Jones: "Couple of simple fixes due for the 3.17 rcs (and a sneaky document addition that slipped from the previous pull-request)" * tag 'mfd-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators mfd: tc3589x: Add device tree bindings mfd: ab8500-core: Use 'ifdef' for config options mfd: htc-i2cpld: Fix %d confusingly prefixed with 0x in format string mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format string
2014-08-28mfd: twl4030-power: Fix PM idle pin configuration to not conflict with ↵Tony Lindgren
regulators Commit 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) added support for configuring the PMIC to cut off resources during deeper idle states to save power. This however caused regression for n900 display power that needed the PMIC configuration to be disabled with commit d937678ab625 (ARM: dts: Revert enabling of twl configuration for n900). Turns out the root cause of the problem is that we must use TWL4030_RESCONFIG_UNDEF instead of DEV_GRP_NULL to avoid disabling regulators that may have been enabled before the init function for twl4030-power.c runs. With TWL4030_RESCONFIG_UNDEF we let the regulator framework control the regulators like it should. Here we need to only configure the sys_clken and sys_off_mode triggers for the regulators that cannot be done by the regulator framework as it's not running at that point. This allows us to enable the PMIC configuration for n900. Fixes: 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) Cc: stable@vger.kernel.org # v3.16 Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-24ARM: shmobile: koelsch: Remove non-existent i2c6 pinmuxGeert Uytterhoeven
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts refers to non-existent pinmux configuration data: pinmux core: sh-pfc does not support function i2c6 sh-pfc e6060000.pfc: invalid function i2c6 in map table Remove it to fix this. Fixes: commit 1d41f36a68c0f4e9b01d563ce33bab5201858b54 ("ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-24ARM: tegra: apalis/colibri t30: fix on-module 5v0 suppliesMarcel Ziswiler
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: <stable@vger.kernel.org> #v3.16+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-24Merge tag 'v3.17-rockchip-fixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner: Pinctrl that got accidentially dropped when reorganizing the dts files and addition of the new Rockchip list to MAINTAINERS. * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-23ARM: dts: rockchip: readd missing mmc0 pinctrl settingsHeiko Stuebner
During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-08-22Merge tag 'sunxi-dt-for-3.17-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner DT changes, take 2" from Maxime Ripard: Only a single patch in here that fixes a DTC warning. * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-19ARM: dts: ODROID i2c improvementsDaniel Drake
Increase max i2c bus frequency beyond the default for faster data transfers. According to the manual, these faster speeds are only available when the board is wired up the right way. In this case, the vendor kernel has run at this speed for a long time. sda-delay is needed for talking to RTC on PMIC, otherwise the i2c controller never sees an ACK. Strangely the other PMIC i2c slave (the main one) works fine even without this delay. I Chose value 100 to match the vendor kernel. Signed-off-by: Daniel Drake <drake@endlessm.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-19ARM: dts: Enable PMIC interrupts on ODROIDDaniel Drake
The ODROID kernel shows that the PMIC interrupt line is hooked up to pin GPX3-2. This is needed for the max77686-irq driver to create the PMIC IRQ domain, which is needed by max77686-rtc. Signed-off-by: Daniel Drake <drake@endlessm.com> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-19ARM: dts: imx6sx: fix the pad setting for uart CTS_BFugang Duan
The current pinfunc define all uart CTS_B IO port for DCE uart 'CTS_B' IP port. Since uart IP port 'CTS_B' is output, and it don't need to set 'SELECT_INPUT' bit. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-18ARM: dts: i.MX53: fix apparent bug in VPU clksLothar Waßmann
The VPU on i.MX53 has two distinct clocks for register access and internal function. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Fixes: fbf970f61eb9 ("ARM: dts: mx53qsb: Enable VPU support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-18ARM: dts: imx6: edmqmx6: change enet reset pinSilvio Fricke
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-18ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.Bill Pringlemeir
Previous version had an extra 'fsl' which made the pins not match any entry. The console message, vf610-pinctrl 40048000.iomuxc: no fsl,pins property in node \ /soc/aips-bus@40000000/iomuxc@40048000/vf610-twr/esdhc1grp is displayed without the fix. The prior version would generally work as u-boot sets the pins properly for sdhc. This change allows Linux sdhc use even if u-boot is built without sdhc support. Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com> Acked-by: Stefan Agner <stefan@agner.ch> Fixes: 0517fe6aa880 ("ARM: dts: vf610-twr: Add support for sdhc1") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-14Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ...
2014-08-11Merge branch 'devicetree/next-console' into devicetree/nextGrant Likely
2014-08-09ARM: dts: exynos5420: remove disp_pdStephen Rothwell
This was caused by commit 5a8da524049c ("ARM: dts: exynos5420: add dsi node"), which conflicted with d51cad7df871 ("ARM: dts: remove display power domain for exynos5420"). The DTS addition should never have been merged through the DRM tree in the first place, and it lacked an ack from the platform maintainer (who would have known that the disp_pd reference got removed). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-09ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsiDoug Anderson
The EHCI and HSIC device tree nodes were added in the wrong place. Fix them. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
2014-08-08Merge tag 'drivers-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ...
2014-08-08Merge tag 'dt-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ...
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-08-07Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull DRM updates from Dave Airlie: "Like all good pull reqs this ends with a revert, so it must mean we tested it, [ Ed. That's _one_ way of looking at it ] This pull is missing nouveau, Ben has been stuck trying to track down a very longstanding bug that revealed itself due to some other changes. I've asked him to send you a direct pull request for nouveau once he cleans things up. I'm away until Monday so don't want to delay things, you can make a decision on that when he sends it, I have my phone so I can ack things just not really merge much. It has one trivial conflict with your tree in armada_drv.c, and also the pull request contains some component changes that are already in your tree, the base tree from Russell went via Greg's tree already, but some stuff still shows up in here that doesn't when I merge my tree into yours. Otherwise all pretty standard graphics fare, one new driver and changes all over the place. New drivers: - sti kms driver for STMicroelectronics chipsets stih416 and stih407. core: - lots of cleanups to the drm core - DP MST helper code merged - universal cursor planes. - render nodes enabled by default panel: - better panel interfaces - new panel support - non-continuous cock advertising ability ttm: - shrinker fixes i915: - hopefully ditched UMS support - runtime pm fixes - psr tracking and locking - now enabled by default - userptr fixes - backlight brightness fixes - MST support merged - runtime PM for dpms - primary planes locking fixes - gen8 hw semaphore support - fbc fixes - runtime PM on SOix sleep state hw. - mmio base page flipping - lots of vlv/chv fixes. - universal cursor planes radeon: - Hawaii fixes - display scalar support for non-fixed mode displays - new firmware format support - dpm on more asics by default - GPUVM improvements - uncached and wc GTT buffers - BOs > visible VRAM exynos: - i80 interface support - module auto-loading - ipp driver consolidated. armada: - irq handling in crtc layer only - crtc renumbering - add component support - DT interaction changes. tegra: - load as module fixes - eDP bpp and sync polarity fixed - DSI non-continuous clock mode support - better support for importing buffers from nouveau msm: - mdp5/adq8084 v1.3 hw enablement - devicetree clk changse - ifc6410 board working tda998x: - component support - DT documentation update vmwgfx: - fix compat shader namespace" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits) Revert "drm: drop redundant drm_file->is_master" drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible ...
2014-08-07Merge tag 'pinctrl-v3.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "This is the bulk pin control changes for the v3.17 merge development cycle: - get rid of the .disable() callback from the driver callback vtable. This callback was abused and counterintuitive since a pin or group of pins can be said to always be in some setting, and never really disabled. We now only enable a certain muxing, and move between some certain muxings, we never "disable" a mux setting - some janitorial moving the MSM, Samsung and Nomadik and drivers to their own subdirectories for a clearer view in the subsystem. This will continue - kill off the use of the return value from gpiochip_remove(), this will be done in parallel in the GPIO subsystem and hopefully not trigger too many unchecked return value warnings before we get rid of this altogether - a huge set of changes and improvements to the Allwinner sunxi drivers especially for their latest A23 and A31 SoCs, and some ground work for the new sun8i platform family - a large set of Rockchip driver improvements adding support for the RK3288 SoC - advances in migration of older Freescale platforms to pin control, especially i.MX1 - Samsung and Exynos improvements - support for the Qualcomm MSM8960 SoC - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail drivers - a bunch of nice janitorial work done with cppcheck" * tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits) pinctrl: baytrail: Convert to use gpiolib irqchip pinctrl: sunxi: number gpio ranges starting from 0 pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ pinctrl: rockchip: add drive-strength control for rk3288 pinctrl: rockchip: add separate type for rk3288 pinctrl: rockchip: set is_generic in pinconf_ops pinctrl: msm: drop negativity check on unsigned value pinctrl: remove all usage of gpio_remove ret val in driver/pinctl pinctrl: qcom: Make muxing of gpio function explicit pinctrl: nomadik: move all Nomadik drivers to subdir pinctrl: samsung: Group all drivers in a sub-dir sh-pfc: sh73a0: Introduce the use of devm_regulator_register sh-pfc: Add renesas,pfc-r8a7791 to binding documentation pinctrl: msm: move all qualcomm drivers to subdir pinctrl: msm: Add msm8960 definitions pinctrl: samsung: Allow pin value to be initialized using pinfunc pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs pinctrl: samsung: Handle GPIO request and free using pinctrl helpers pinctrl: samsung: Decouple direction setting from pinctrl ...
2014-08-07Merge branch 'next/fixes-non-critical' into next/cleanupOlof Johansson
Merging in the few fixes we had also received, no need to keep those in a separate branch. * next/fixes-non-critical: drivers: CCI: Correct use of ! and & MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n ARM: omap2+: gpmc-nand: Use dynamic platform_device_alloc() omap16xx: Removes fixme no longer needed in ocpi_enable() ARM: dts: OMAP5: Add device nodes for ABB ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-05Merge tag 'spi-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A quiet release, more bug fixes than anything else. A few things do stand out though: - updates to several drivers to move towards the standard GPIO chip select handling in the core. - DMA support for the SH MSIOF driver. - support for Rockchip SPI controllers (their first mainline submission)" * tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: davinci: use spi_device.cs_gpio to store gpio cs per spi device spi: davinci: add support to configure gpio cs through dt spi/pl022: Explicitly truncate large bitmask spi/atmel: Fix pointer to int conversion warnings on 64 bit builds spi: davinci: fix to support more than 2 chip selects spi: topcliff-pch: don't hardcode PCI slot to get DMA device spi: orion: fix incorrect handling of cell-index DT property spi: orion: Fix error return code in orion_spi_probe() spi/rockchip: fix error return code in rockchip_spi_probe() spi/rockchip: remove redundant dev_err call in rockchip_spi_probe() spi/rockchip: remove duplicated include from spi-rockchip.c ARM: dts: fix the chip select gpios definition in the SPI nodes spi: s3c64xx: Update binding documentation spi: s3c64xx: use the generic SPI "cs-gpios" property spi: s3c64xx: Revert "spi: s3c64xx: Added provision for dedicated cs pin" spi: atmel: Use dmaengine_prep_slave_sg() API spi: topcliff-pch: Update error messages for dmaengine_prep_slave_sg() API spi: sh-msiof: Use correct device for DMA mapping with IOMMU spi: sh-msiof: Handle dmaengine_prep_slave_single() failures gracefully spi: rspi: Handle dmaengine_prep_slave_sg() failures gracefully ...
2014-08-04Merge tag 'usb-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while" * tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (211 commits) USB: devio: fix issue with log flooding uas: Log a warning when we cannot use uas because the hcd lacks streams uas: Only complain about missing sg if all other checks succeed xhci: Add missing checks for xhci_alloc_command failure xhci: Rename Asrock P67 pci product-id to EJ168 xhci: Blacklist using streams on the Etron EJ168 controller uas: Limit qdepth to 32 when connected over usb-2 uwb/whci: use correct structure type name in sizeof usb-core bInterval quirk USB: serial: ftdi_sio: Add support for new Xsens devices USB: serial: ftdi_sio: Annotate the current Xsens PID assignments usb: chipidea: debug: fix sparse non static symbol warnings usb: ci_hdrc_imx doc: fsl,usbphy is required usb: ci_hdrc_imx: Return -EINVAL for missing USB PHY usb: core: allow zero packet flag for interrupt urbs usb: lvstest: Fix sparse warnings generated by kbuild test bot USB: core: hcd-pci: free IRQ before disabling PCI device when shutting down phy: miphy365x: Represent each PHY channel as a DT subnode phy: miphy365x: Provide support for the MiPHY356x Generic PHY phy: miphy365x: Add Device Tree bindings for the MiPHY365x ...
2014-08-04Merge tag 'tty-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver update from Greg KH: "Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while" * tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (82 commits) tty/n_gsm.c: fix a memory leak in gsmld_open pch_uart: don't hardcode PCI slot to get DMA device tty: n_gsm, use setup_timer Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console" serial: sc16is7xx: Correct initialization of s->clk serial: 8250_dw: Add support for deferred probing serial: 8250_dw: Add optional reset control support serial: st-asc: Fix overflow in baudrate calculation serial: st-asc: Don't call BUG in asc_console_setup() tty: serial: msm: Make of_device_id array const tty/n_gsm.c: get gsm->num after gsm_activate_mux serial/core: Fix too big allocation for attribute member drivers/tty/serial: use correct type for dma_map/unmap serial: altera_jtaguart: Fix putchar function passed to uart_console_write() serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers Serial: allow port drivers to have a default attribute group tty: kgdb_nmi: Automatically manage tty enable serial: altera_jtaguart: Adpot uart_console_write() serial: samsung: improve code clarity by defining a variable serial: samsung: correct the case and default order in switch ...
2014-08-04Merge tag 'staging-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while" * tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits) staging: comedi: addi_apci_1564: remove diagnostic interrupt support code staging: comedi: addi_apci_1564: add subdevice to check diagnostic status staging: wlan-ng: coding style problem fix staging: wlan-ng: fixing coding style problems staging: comedi: ii_pci20kc: request and ioremap memory staging: lustre: bitwise vs logical typo staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h staging: dgnc: rephrase comment staging: comedi: ni_tio: remove some dead code staging: rtl8723au: Fix static symbol sparse warning staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc' staging: rtl8723au: Do not duplicate kernel provided USB macros staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown staging: rtl8723au: Remove two never set variables staging: rtl8723au: RSSI_test is never set staging:r8190: coding style: Fixed checkpatch reported Error staging:r8180: coding style: Fixed too long lines staging:r8180: coding style: Fixed commenting style staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer ...
2014-08-05Merge tag 'v3.16' into drm-nextDave Airlie
Linux 3.16 backmerge requested by i915, nouveau and radeon authors Conflicts: drivers/gpu/drm/i915/i915_gem_render_state.c drivers/gpu/drm/i915/intel_drv.h
2014-08-04Merge tag 'clk-for-linus-3.17' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.17 are mostly additions of new clock drivers and fixes/enhancements to existing clock drivers. There are also some non-critical fixes and improvements to the framework core. Changes to the clock framework core include: - improvements to printks on errors - flattening the previously hierarchal structure of per-clock entries in debugfs - allow per-clock debugfs entries that are specific to a particular clock driver - configure initial clock parent and/or initial clock rate from Device Tree - several feature enhancements to the composite clock type - misc fixes New clock drivers added include: - TI Palmas PMIC - Allwinner A23 SoC - Qualcomm APQ8084 and IPQ8064 SoCs - Rockchip rk3188, rk3066 and rk3288 SoCs - STMicroelectronics STiH407 SoC - Cirrus Logic CLPS711X SoC Many fixes, feature enhancements and further clock tree support for existing clock drivers also were merged, such as Samsung's "ARMCLK down" power saving feature for their Exynos4 & Exynos5 SoCs" * tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: Add missing of_clk_set_defaults export clk: checking wrong variable in __set_clk_parents() clk: Propagate any error return from debug_init() clk: clps711x: Add DT bindings documentation clk: Add CLPS711X clk driver clk: st: Use round to closest divider flag clk: st: Update frequency tables for fs660c32 and fs432c65 clk: st: STiH407: Support for clockgenA9 clk: st: STiH407: Support for clockgenD0/D2/D3 clk: st: STiH407: Support for clockgenC0 clk: st: Add quadfs reset handling clk: st: Add polarity bit indication clk: st: STiH407: Support for clockgenA0 clk: st: STiH407: Support for A9 MUX Clocks clk: st: STiH407: Support for Flexgen Clocks clk: st: Adds Flexgen clock binding clk: st: Remove uncessary (void *) cast clk: st: use static const for clkgen_pll_data tables clk: st: use static const for stm_fs tables clk: st: Update ST clock binding documentation ...
2014-08-04Merge remote-tracking branches 'spi/fix/s3c64xx', 'spi/fix/samsung' and ↵Mark Brown
'spi/fix/xilinx' into spi-linus
2014-08-03ARM: dts: exynos5420: add dsi nodeYoungJun Cho
This patch adds common part of dsi node. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03ARM: dts: exynos5420: add mipi-phy nodeYoungJun Cho
This patch adds mipi-phy node for MIPI DSI device. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03ARM: dts: exynos5: add system register propertyYoungJun Cho
This patch adds sysreg property to fimd device node which is required to use I80 interface. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-08-03ARM: dts: exynos4: add system register propertyYoungJun Cho
This patch adds sysreg property to fimd device node which is required to use I80 interface. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-07-31Merge tag 'samsung-dt-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT 2nd updates for v3.17" from Kukjin Kim: This is based on tags/exynos-power because this DT changes are depending PMU cleanup. Fixes boot for exynos5260 and exynos5410, - Since exynos cannot boot without obtaining PMU address via DT from now on, add PMU node for exynos5260 and exynos5410 For preparing exynos5250-spring, - move max77686 and cypress,cyapa trackpad from exynos5250- cros-common to exynos5250-snow DT file (Note exynos5250-spring is not included in this branch yet) For exynos3250, - add TMU node and remove duplicated interrupt-parent - add missing pinctrl property for uart0 and uart1 For exynos5250-smdk5250 board - add max77686 pmic interrupt property which is connected to gpx3 * tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (28 commits) ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ARM: dts: Document exynos5410 PMU ARM: EXYNOS: Move cpufreq and cpuidle device registration to init_machine ARM: EXYNOS: Refactored code for using PMU address via DT ARM: EXYNOS: Support cluster power off on exynos5420/5800 ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm ARM: EXYNOS: do not allow cpuidle registration for exynos5420 cpuidle: big.LITTLE: init driver for exynos5420 cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config ARM: EXYNOS: add generic function to calculate cpu number cpuidle: big.LITTLE: add of_device_id structure ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-31ARM: socfpga: Add socfpga Ethernet filter attributes entriesVince Bridgers
This patch adds socfpga Ethernet filter attributes for multicast and unicast filters per Synopsys Ethernet IP configuration chosen by Altera for the Cyclone 5 and Arria SOC FPGAs. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31Merge tag 'for_3.17/samsung-clk' of ↵Mike Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next-samsung Samsung clock patches for 3.17 1) non-critical fixes (without need to push to stable): d5e136a clk: samsung: Register clk provider only after registering its all clocks 305cfab clk: samsung: Make of_device_id array const e9d5295 clk: samsung: exynos5420: Setup clocks before system suspend f65d518 clk: samsung: trivial: Correct typo in author's name 2) Exynos CLKOUT driver: 800c979 clk: samsung: exynos4: Add missing CPU/DMC clock hierarchy 01f7ec2 clk: samsung: exynos4: Add CLKOUT clock hierarchy 1e832e5 clk: samsung: Add driver to control CLKOUT line on Exynos SoCs d19bb39 ARM: dts: exynos: Update PMU node with CLKOUT related data 3) Clock hierarchy extensions: 17d3f1d clk: exynos4: Add PPMU IP block source clocks. ca5b402 clk: samsung: register exynos5420 apll/kpll configuration data 4) ARM CLKDOWN functionality enablement for Exynos4 and 3250: 42773b2 clk: samsung: exynos4: Enable ARMCLK down feature 45c5b0a clk: samsung: exynos3250: Enable ARMCLK down feature
2014-07-30Merge tag 'v3.17-rockchip-rk3xxx-dts-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "two more dts changes for Rockchip Cortex-A9 SoCs" from Heiko Stübner: Watchdog nodes and a duplicate pinctrl property. * tag 'v3.17-rockchip-rk3xxx-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-30ARM: hisi: remove smp from machine descriptorHaojian Zhuang
Use CPU_METHOD_OF_DECLARE() instead. And declare smp method in dts file. Changelog: v6: * Use hisilicon,hi3620-smp as enable-method property in Hi3620 dts. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-30ARM: dts: Add hix5hd2-dkb dts file.Haifeng Yan
Add dts file for Hisilicon x5hd2 development kit board. Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> Signed-off-by: Jiancheng Xue <jchxue@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: Rename dts/dtsi to include hisi prefix] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-30Merge tag 'v3.17-rockchip-rk3288-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "Basic rk3288 usb support" from Heiko Stübner: Add support for rk3288 ehci controllers. * tag 'v3.17-rockchip-rk3288-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-31ARM: dts: Enable USB host0 (EHCI) on rk3288-evbDoug Anderson
This is the top USB port on the evb (the one closest to the Ethernet connector). Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-31ARM: dts: add rk3288 ehci usb devicesKever Yang
rk3288 has two kind of usb controller; this adds the ehci variant for host0 and hsic. At the moment we don't add any phys for these controllers, but the default settings seem to work OK. There is a hardware problem in ohci controller which make it unavailable and host0 controller can only support high-speed devices. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-31ARM: dts: Turn on USB host vbus on rk3288-evbDoug Anderson
There is no phy driver that works on the Rockchip board for either USB host port yet. For now just hardcode the vbus signal to be on all the time which makes both the dwc2 host and the EHCI port work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30Merge tag 'zynq-dt-for-3.17-3' of git://git.xilinx.com/linux-xlnx into next/dtOlof Johansson
Merge "Xilinx Zynq dt changes for v3.17 - third pull request" from Michal Simek: arm: Xilinx Zynq dt patches for v3.17 third pull request - Add Adapteva Parallella board/DT - Add SPI nodes - Add CAN nodes - Clean Zynq description * tag 'zynq-dt-for-3.17-3' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: dts: zynq: Add SPI ARM: dts: zynq: Add DMAC for Parallella ARM: dts: zynq: Add Parallella device tree Documentation: devicetree: Adapteva boards Documentation: devicetree: Adapteva vendor prefix Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-30ARM: tegra: apalis t30: fix device tree compatible nodeMarcel Ziswiler
Working on sound support I noticed the Apalis T30 Evaluation board device tree missing the more generic Apalis T30 compatible string. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>