aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-25btrfs: fix fsfreeze hang caused by delayed iputs dealWang Xiaoguang
When running fstests generic/068, sometimes we got below deadlock: xfs_io D ffff8800331dbb20 0 6697 6693 0x00000080 ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000 ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001 ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8 Call Trace: [<ffffffff816a9045>] schedule+0x35/0x80 [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140 [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100 [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30 [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs] [<ffffffff810d32b5>] percpu_down_read+0x35/0x50 [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40 [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs] [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs] [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs] [<ffffffff81230a1a>] evict+0xba/0x1a0 [<ffffffff812316b6>] iput+0x196/0x200 [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs] [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs] [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs] [<ffffffff81218040>] freeze_super+0xf0/0x190 [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0 [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140 [<ffffffff81229409>] SyS_ioctl+0x79/0x90 [<ffffffff81003c12>] do_syscall_64+0x62/0x110 [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25 >From this warning, freeze_super() already holds SB_FREEZE_FS, but btrfs_freeze() will call btrfs_commit_transaction() again, if btrfs_commit_transaction() finds that it has delayed iputs to handle, it'll start_transaction(), which will try to get SB_FREEZE_FS lock again, then deadlock occurs. The root cause is that in btrfs, sync_filesystem(sb) does not make sure all metadata is updated. There still maybe some codes adding delayed iputs, see below sample race window: CPU1 | CPU2 |-> freeze_super() | |-> sync_filesystem(sb); | | |-> cleaner_kthread() | | |-> btrfs_delete_unused_bgs() | | |-> btrfs_remove_chunk() | | |-> btrfs_remove_block_group() | | |-> btrfs_add_delayed_iput() | | |-> sb->s_writers.frozen = SB_FREEZE_FS; | |-> sb_wait_write(sb, SB_FREEZE_FS); | | acquire SB_FREEZE_FS lock. | | | |-> btrfs_freeze() | |-> btrfs_commit_transaction() | |-> btrfs_run_delayed_iputs() | | will handle delayed iputs, | | that means start_transaction() | | will be called, which will try | | to get SB_FREEZE_FS lock. | To fix this issue, introduce a "int fs_frozen" to record internally whether fs has been frozen. If fs has been frozen, we can not handle delayed iputs. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add comment to btrfs_freeze ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: update btrfs_space_info's bytes_may_use timelyWang Xiaoguang
This patch can fix some false ENOSPC errors, below test script can reproduce one false ENOSPC error: #!/bin/bash dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128 dev=$(losetup --show -f fs.img) mkfs.btrfs -f -M $dev mkdir /tmp/mntpoint mount $dev /tmp/mntpoint cd /tmp/mntpoint xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile Above script will fail for ENOSPC reason, but indeed fs still has free space to satisfy this request. Please see call graph: btrfs_fallocate() |-> btrfs_alloc_data_chunk_ondemand() | bytes_may_use += 64M |-> btrfs_prealloc_file_range() |-> btrfs_reserve_extent() |-> btrfs_add_reserved_bytes() | alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not | change bytes_may_use, and bytes_reserved += 64M. Now | bytes_may_use + bytes_reserved == 128M, which is greater | than btrfs_space_info's total_bytes, false enospc occurs. | Note, the bytes_may_use decrease operation will be done in | end of btrfs_fallocate(), which is too late. Here is another simple case for buffered write: CPU 1 | CPU 2 | |-> cow_file_range() |-> __btrfs_buffered_write() |-> btrfs_reserve_extent() | | | | | | | | | ..... | |-> btrfs_check_data_free_space() | | | | |-> extent_clear_unlock_delalloc() | In CPU 1, btrfs_reserve_extent()->find_free_extent()-> btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease operation will be delayed to be done in extent_clear_unlock_delalloc(). Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's btrfs_check_data_free_space() tries to reserve 100MB data space. If 100MB > data_sinfo->total_bytes - data_sinfo->bytes_used - data_sinfo->bytes_reserved - data_sinfo->bytes_pinned - data_sinfo->bytes_readonly - data_sinfo->bytes_may_use btrfs_check_data_free_space() will try to allcate new data chunk or call btrfs_start_delalloc_roots(), or commit current transaction in order to reserve some free space, obviously a lot of work. But indeed it's not necessary as long as decreasing bytes_may_use timely, we still have free space, decreasing 128M from bytes_may_use. To fix this issue, this patch chooses to update bytes_may_use for both data and metadata in btrfs_add_reserved_bytes(). For compress path, real extent length may not be equal to file content length, so introduce a ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by file content length. Then compress path can update bytes_may_use correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC and RESERVE_FREE. As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as PREALLOC, we also need to update bytes_may_use, but can not pass EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook() to update btrfs_space_info's bytes_may_use. Meanwhile __btrfs_prealloc_file_range() will call btrfs_free_reserved_data_space() internally for both sucessful and failed path, btrfs_prealloc_file_range()'s callers does not need to call btrfs_free_reserved_data_space() any more. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: divide btrfs_update_reserved_bytes() into two functionsWang Xiaoguang
This patch divides btrfs_update_reserved_bytes() into btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and next patch will extend btrfs_add_reserved_bytes()to fix some false ENOSPC error, please see later patch for detailed info. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()Wang Xiaoguang
In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses wrong file offset for reloc_inode, it uses cluster->start and cluster->end, which indeed are extent's bytenr. The correct value should be cluster->[start|end] minus block group's start bytenr. start bytenr cluster->start | | extent | extent | ...| extent | |----------------------------------------------------------------| | block group reloc_inode | Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: qgroup: Fix qgroup incorrectness caused by log replayQu Wenruo
When doing log replay at mount time(after power loss), qgroup will leak numbers of replayed data extents. The cause is almost the same of balance. So fix it by manually informing qgroup for owner changed extents. The bug can be detected by btrfs/119 test case. Cc: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: relocation: Fix leaking qgroups numbers on data extentsQu Wenruo
This patch fixes a REGRESSION introduced in 4.2, caused by the big quota rework. When balancing data extents, qgroup will leak all its numbers for relocated data extents. The relocation is done in the following steps for data extents: 1) Create data reloc tree and inode 2) Copy all data extents to data reloc tree And commit transaction 3) Create tree reloc tree(special snapshot) for any related subvolumes 4) Replace file extent in tree reloc tree with new extents in data reloc tree And commit transaction 5) Merge tree reloc tree with original fs, by swapping tree blocks For 1)~4), since tree reloc tree and data reloc tree doesn't count to qgroup, everything is OK. But for 5), the swapping of tree blocks will only info qgroup to track metadata extents. If metadata extents contain file extents, qgroup number for file extents will get lost, leading to corrupted qgroup accounting. The fix is, before commit transaction of step 5), manually info qgroup to track all file extents in data reloc tree. Since at commit transaction time, the tree swapping is done, and qgroup will account these data extents correctly. Cc: Mark Fasheh <mfasheh@suse.de> Reported-by: Mark Fasheh <mfasheh@suse.de> Reported-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()Qu Wenruo
Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions: 1. btrfs_qgroup_insert_dirty_extent_nolock() Almost the same with original code. For delayed_ref usage, which has delayed refs locked. Change the return value type to int, since caller never needs the pointer, but only needs to know if they need to free the allocated memory. 2. btrfs_qgroup_insert_dirty_extent() The more encapsulated version. Will do the delayed_refs lock, memory allocation, quota enabled check and other things. The original design is to keep exported functions to minimal, but since more btrfs hacks exposed, like replacing path in balance, we need to record dirty extents manually, so we have to add such functions. Also, add comment for both functions, to info developers how to keep qgroup correct when doing hacks. Cc: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: waiting on qgroup rescan should not always be interruptibleJeff Mahoney
We wait on qgroup rescan completion in three places: file system shutdown, the quota disable ioctl, and the rescan wait ioctl. If the user sends a signal while we're waiting, we continue happily along. This is expected behavior for the rescan wait ioctl. It's racy in the shutdown path but mostly works due to other unrelated synchronization points. In the quota disable path, it Oopses the kernel pretty much immediately. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: properly track when rescan worker is runningJeff Mahoney
The qgroup_flags field is overloaded such that it reflects the on-disk status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN flag is used to indicate that a rescan operation is in progress, but if the file system is unmounted while a rescan is running, the rescan operation is paused. If the file system is then mounted read-only, the flag will still be present but the rescan operation will not have been resumed. When we go to umount, btrfs_qgroup_wait_for_completion will see the flag and interpret it to mean that the rescan worker is still running and will wait for a completion that will never come. This patch uses a separate flag to indicate when the worker is running. The locking and state surrounding the qgroup rescan worker needs a lot of attention beyond this patch but this is enough to avoid a hung umount. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by; Jeff Mahoney <jeffm@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: flush_space: treat return value of do_chunk_alloc properlyAlex Lyakas
do_chunk_alloc returns 1 when it succeeds to allocate a new chunk. But flush_space will not convert this to 0, and will also return 1. As a result, reserve_metadata_bytes will think that flush_space failed, and may potentially return this value "1" to the caller (depends how reserve_metadata_bytes was called). The caller will also treat this as an error. For example, btrfs_block_rsv_refill does: int ret = -ENOSPC; ... ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush); if (!ret) { block_rsv_add_bytes(block_rsv, num_bytes, 0); return 0; } return ret; So it will return -ENOSPC. Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: add ASSERT for block group's memory leakLiu Bo
This adds several ASSERT()' s to report memory leak of block group cache. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25btrfs: backref: Fix soft lockup in __merge_refs functionQu Wenruo
When over 1000 file extents refers to one extent, find_parent_nodes() will be obviously slow, due to the O(n^2)~O(n^3) loops inside __merge_refs(). The following ftrace shows the cubic growth of execution time: 256 refs 5) + 91.768 us | __add_keyed_refs.isra.12 [btrfs](); 5) 1.447 us | __add_missing_keys.isra.13 [btrfs](); 5) ! 114.544 us | __merge_refs [btrfs](); 5) ! 136.399 us | __merge_refs [btrfs](); 512 refs 6) ! 279.859 us | __add_keyed_refs.isra.12 [btrfs](); 6) 3.164 us | __add_missing_keys.isra.13 [btrfs](); 6) ! 442.498 us | __merge_refs [btrfs](); 6) # 2091.073 us | __merge_refs [btrfs](); and 1024 refs 7) ! 368.683 us | __add_keyed_refs.isra.12 [btrfs](); 7) 4.810 us | __add_missing_keys.isra.13 [btrfs](); 7) # 2043.428 us | __merge_refs [btrfs](); 7) * 18964.23 us | __merge_refs [btrfs](); And sort them into the following char: (Unit: us) ------------------------------------------------------------------------ Trace function | 256 ref | 512 refs | 1024 refs | ------------------------------------------------------------------------ __add_keyed_refs | 91 | 249 | 368 | __add_missing_keys | 1 | 3 | 4 | __merge_refs 1st call | 114 | 442 | 2043 | __merge_refs 2nd call | 136 | 2091 | 18964 | ------------------------------------------------------------------------ We can see the that __add_keyed_refs() grows almost in linear behavior. And __add_missing_keys() in this case doesn't change much or takes much time. While for the 1st __merge_refs() it's square growth for the 2nd __merge_refs() call it's cubic growth. It's no doubt that merge_refs() will take a long long time to execute if the number of refs continues its grows. So add a cond_resced() into the loop of __merge_refs(). Although this will solve the problem of soft lockup, we need to use the new rb_tree based structure introduced by Lu Fengqi to really solve the long execution time. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25Btrfs: fix memory leak of reloc_rootLiu Bo
When some critical errors occur and FS would be flipped into RO, if we have an on-going balance, we can end up with a memory leak of root->reloc_root since btrfs_drop_snapshots() bails out without freeing reloc_root at the very early start. However, we're not able to free reloc_root in btrfs_drop_snapshots() because its caller, merge_reloc_roots(), still needs to access it to cleanup reloc_root's rbtree. This makes us free reloc_root when we're going to free fs/file roots. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25arm64: avoid TLB conflict with CONFIG_RANDOMIZE_BASEMark Rutland
When CONFIG_RANDOMIZE_BASE is selected, we modify the page tables to remap the kernel at a newly-chosen VA range. We do this with the MMU disabled, but do not invalidate TLBs prior to re-enabling the MMU with the new tables. Thus the old mappings entries may still live in TLBs, and we risk violating Break-Before-Make requirements, leading to TLB conflicts and/or other issues. We invalidate TLBs when we uninsall the idmap in early setup code, but prior to this we are subject to issues relating to the Break-Before-Make violation. Avoid these issues by invalidating the TLBs before the new mappings can be used by the hardware. Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # 4.6+ Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-25Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: - Fix cpu_cooling to have separate thermal_cooling_device_ops structures for cpus with and without power model, to avoid NULL dereference in cpufreq_state2power. From Brendan Jackman. - Fix a possible NULL dereference in imx_thermal driver. From Corentin LABBE. - Another two trivial fixes, one typo fix and one deleting module owner. From Caesar Wang and Markus Elfring. * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: imx: fix a possible NULL dereference thermal: trivial: fix the typo Thermal-INT3406: Delete owner assignment thermal: cpu_cooling: Fix NULL dereference in cpufreq_state2power
2016-08-25Merge branch 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes radeon and amdgpu fixes for 4.8. Nothing major: - fix a performance regression due to the LRU changes in 4.7 - 32 bit fixes - fix a PLL regression - misc bug fixes * 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: skip TV/CV in display parsing drm/amdgpu: avoid a possible array overflow drm/amdgpu: fix lru size grouping v2 drm/amdgpu: fix timeout value check in amd_sched_job_recovery drm/amdgpu: fix sdma_v2_4_ring_test_ib drm/amdgpu: fix amdgpu_move_blit on 32bit systems drm/radeon: fix radeon_move_blit on 32bit systems drm/radeon: only apply the SS fractional workaround to RS[78]80
2016-08-25Merge tag 'drm/tegra/for-4.8-rc4' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.8-rc4 This contains one fix for DSI runtime power management support that was introduced in v4.8-rc1. This is slightly more elaborate than I would've wished, but there are a few corner cases that needed fixing. * tag 'drm/tegra/for-4.8-rc4' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: dsi: Enhance runtime power management
2016-08-24dm log: fix unitialized bio operation flagsHeinz Mauelshagen
Commit e6047149db ("dm: use bio op accessors") switched DM over to using bio_set_op_attrs() but didn't take care to initialize lc->io_req.bi_op_flags in dm-log.c:rw_header(). This caused rw_header()'s call to dm_io() to make bio->bi_op_flags be uninitialized in dm-io.c:do_region(), which ultimately resulted in a SCSI BUG() in sd_init_command(). Also, adjust rw_header() and its callers to use REQ_OP_{READ|WRITE}. Fixes: e6047149db ("dm: use bio op accessors") Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-24dm flakey: fix reads to be issued if drop_writes configuredMike Snitzer
v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the down_interval") overlooked the 'drop_writes' feature, which is meant to allow reads to be issued rather than errored, during the down_interval. Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval") Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2016-08-24blk-mq: improve warning for running a queue on the wrong CPUJens Axboe
__blk_mq_run_hw_queue() currently warns if we are running the queue on a CPU that isn't set in its mask. However, this can happen if a CPU is being offlined, and the workqueue handling will place the work on CPU0 instead. Improve the warning so that it only triggers if the batch cpu in the hardware queue is currently online. If it triggers for that case, then it's indicative of a flow problem in blk-mq, so we want to retain it for that case. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24blk-mq: don't overwrite rq->mq_ctxJens Axboe
We do this in a few places, if the CPU is offline. This isn't allowed, though, since on multi queue hardware, we can't just move a request from one software queue to another, if they map to different hardware queues. The request and tag isn't valid on another hardware queue. This can happen if plugging races with CPU offlining. But it does no harm, since it can only happen in the window where we are currently busy freezing the queue and flushing IO, in preparation for redoing the software <-> hardware queue mappings. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24IB/srpt: Update sport->port_guid with each port refreshDoug Ledford
If port_guid is set with the default subnet_prefix, then we get a change event and run a port refresh, we don't update the port_guid. As a result, attempts to create a target device that uses the new subnet_prefix in the wwn will fail to find a match and be rejected by the ib_srpt driver. This makes it impossible to configure a port if it was initialized with a default subnet_prefix and later changed to any non-default subnet-prefix. Updating the port refresh task to always update the wwn based upon the current subnext_prefix solves this problem. Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: nab@linux-iscsi.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24Merge branch 'for-linus-4.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fix from Richard Weinberger: "This contains a fix for a build regression introduced during the merge window" * 'for-linus-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Don't discard .text.exit section
2016-08-24Merge tag 'upstream-4.8-rc4' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBIFS fixes from Richard Weinberger: "This pull requests contains fixes for two issues in UBI and UBIFS: - wrong UBIFS assertion. - a UBIFS xattr regression" * tag 'upstream-4.8-rc4' of git://git.infradead.org/linux-ubifs: ubifs: Fix xattr generic handler usage ubifs: Fix assertion in layout_in_gaps()
2016-08-24Merge remote-tracking branches 'asoc/fix/max98371', 'asoc/fix/nau8825', ↵Mark Brown
'asoc/fix/omap', 'asoc/fix/samsung', 'asoc/fix/simple' and 'asoc/fix/wm2000' into asoc-linus
2016-08-24Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/compress', ↵Mark Brown
'asoc/fix/da7213' and 'asoc/fix/debugfs' into asoc-linus
2016-08-24Merge remote-tracking branch 'asoc/fix/rcar' into asoc-linusMark Brown
2016-08-24Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2016-08-24Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2016-08-24Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown
2016-08-24drm/amdgpu: skip TV/CV in display parsingAlex Deucher
No asics supported by amdgpu support analog TV. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-24Merge tag 'for-linus-4.8b-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen regression fix from David Vrabel: "Fix a regression in the xenbus device preventing userspace tools from working" * tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: change the type of xen_vcpu_id to uint32_t xenbus: don't look up transaction IDs for ordinary writes
2016-08-24drm/amdgpu: avoid a possible array overflowAlex Deucher
When looking up the connector type make sure the index is valid. Avoids a later crash if we read past the end of the array. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-24xen: change the type of xen_vcpu_id to uint32_tVitaly Kuznetsov
We pass xen_vcpu_id mapping information to hypercalls which require uint32_t type so it would be cleaner to have it as uint32_t. The initializer to -1 can be dropped as we always do the mapping before using it and we never check the 'not set' value anyway. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-08-24xenbus: don't look up transaction IDs for ordinary writesJan Beulich
This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition") Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-08-24RDMA/ocrdma: Fix the max_sge reported from FWSelvin Xavier
Current driver is reporting wrong values for max_sge and max_sge_rd in query_device. This breaks the nfs rdma and iser in some device profiles. Fixing the driver to report correct values from FW. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Avoid writing to freed memoryMustafa Ismail
iwpbl->iwmr points to the structure that contains iwpbl, which is iwmr. Setting this to NULL would result in writing to freed memory. So just free iwmr, and return. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Fix double free of allocated_bufferMustafa Ismail
Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in the create_qp error path. Correct this by having it freed only once in i40iw_free_qp_resources(). Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24IB/mlx5: Remove superfluous include of io-mapping.hChris Wilson
This file does not use any structs or functions defined by io-mapping.h (nor does it directly use iomap, ioremap, iounamp or friends). Remove it to simplify verification of changes to io-mapping.h The include existed since its inception in commit e126ba97dba9edeb6fafa3665b5f8497fc9cdf8c Author: Eli Cohen <eli@mellanox.com> Date: Sun Jul 7 17:25:49 2013 +0300 mlx5: Add driver for Mellanox Connect-IB adapters which looks like a copy across from the Mellanox ethernet driver. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eli Cohen <eli@mellanox.com> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Matan Barak <matanb@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Do not set self-referencing pointer to NULL after kfreeMustafa Ismail
In i40iw_free_virt_mem(), do not set mem->va to NULL after freeing it as mem->va is a self-referencing pointer to mem. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Add missing NULL check for MPA private dataShiraz Saleem
Add NULL check for pdata and pdata->addr before the memcpy in i40iw_form_cm_frame(). This fixes a NULL pointer de-reference which occurs when the MPA private data pointer is NULL. Also only copy pdata->size bytes in the memcpy to prevent reading past the length of the private data buffer provided by upper layer. Fixes: f27b4746f378 ("i40iw: add connection management code") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24drm/amdgpu: fix lru size grouping v2Christian König
Adding a BO can make it the insertion point for larger sizes as well. v2: add a comment about the guard structure. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-24block: make sure a big bio is split into at most 256 bvecsMing Lei
After arbitrary bio size was introduced, the incoming bio may be very big. We have to split the bio into small bios so that each holds at most BIO_MAX_PAGES bvecs for safety reason, such as bio_clone(). This patch fixes the following kernel crash: > [ 172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 > [ 172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a > [ 172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0 > [ 172.660399] Oops: 0000 [#1] SMP > [...] > [ 172.664780] Call Trace: > [ 172.664813] [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1] > [ 172.664846] [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4 > [ 172.664880] [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod] > [ 172.664912] [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155 > [ 172.664947] [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache] > [ 172.664981] [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache] > [ 172.665016] [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache] The issue can be reproduced by the following steps: - create one raid1 over two virtio-blk - build bcache device over the above raid1 and another cache device and bucket size is set as 2Mbytes - set cache mode as writeback - run random write over ext4 on the bcache device Fixes: 54efd50(block: make generic_make_request handle arbitrarily sized bios) Reported-by: Sebastian Roesner <sroesner-kernelorg@roesner-online.de> Reported-by: Eric Wheeler <bcache@lists.ewheeler.net> Cc: stable@vger.kernel.org (4.3+) Cc: Shaohua Li <shli@fb.com> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24nvme: Fix nvme_get/set_features() with a NULL result pointerAndy Lutomirski
nvme_set_features() callers seem to expect that passing NULL as the result pointer is acceptable. Teach nvme_set_features() not to try to write to the NULL address. For symmetry, make the same change to nvme_get_features(), despite the fact that all current callers pass a valid result pointer. I assume that this bug hasn't been reported in practice because the callers that pass NULL are all in the SCSI translation layer and no one uses the relevant operations. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24drm/tegra: dsi: Enhance runtime power managementThierry Reding
The MIPI DSI output on Tegra SoCs requires some external logic to calibrate the MIPI pads before a video signal can be transmitted. This MIPI calibration logic requires to be powered on while the MIPI pads are being used, which is currently done as part of the DSI driver's probe implementation. This is suboptimal because it will leave the MIPI calibration logic powered up even if the DSI output is never used. On Tegra114 and earlier this behaviour also causes the driver to hang while trying to power up the MIPI calibration logic because the power partition that contains the MIPI calibration logic will be powered on by the display controller at output pipeline configuration time. Thus the power up sequence for the MIPI calibration logic happens before it's power partition is guaranteed to be enabled. Fix this by splitting up the API into a request/free pair of functions that manage the runtime dependency between the DSI and the calibration modules (no registers are accessed) and a set of enable, calibrate and disable functions that program the MIPI calibration logic at points in time where the power partition is really enabled. While at it, make sure that the runtime power management also works in ganged mode, which is currently also broken. Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Tested-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-24perf/core: Use this_cpu_ptr() when stopping AUX eventsWill Deacon
When tearing down an AUX buf for an event via perf_mmap_close(), __perf_event_output_stop() is called on the event's CPU to ensure that trace generation is halted before the process of unmapping and freeing the buffer pages begins. The callback is performed via cpu_function_call(), which ensures that it runs with interrupts disabled and is therefore not preemptible. Unfortunately, the current code grabs the per-cpu context pointer using get_cpu_ptr(), which unnecessarily disables preemption and doesn't pair the call with put_cpu_ptr(), leading to a preempt_count() imbalance and a BUG when freeing the AUX buffer later on: WARNING: CPU: 1 PID: 2249 at kernel/events/ring_buffer.c:539 __rb_free_aux+0x10c/0x120 Modules linked in: [...] Call Trace: [<ffffffff813379dd>] dump_stack+0x4f/0x72 [<ffffffff81059ff6>] __warn+0xc6/0xe0 [<ffffffff8105a0c8>] warn_slowpath_null+0x18/0x20 [<ffffffff8112761c>] __rb_free_aux+0x10c/0x120 [<ffffffff81128163>] rb_free_aux+0x13/0x20 [<ffffffff8112515e>] perf_mmap_close+0x29e/0x2f0 [<ffffffff8111da30>] ? perf_iterate_ctx+0xe0/0xe0 [<ffffffff8115f685>] remove_vma+0x25/0x60 [<ffffffff81161796>] exit_mmap+0x106/0x140 [<ffffffff8105725c>] mmput+0x1c/0xd0 [<ffffffff8105cac3>] do_exit+0x253/0xbf0 [<ffffffff8105e32e>] do_group_exit+0x3e/0xb0 [<ffffffff81068d49>] get_signal+0x249/0x640 [<ffffffff8101c273>] do_signal+0x23/0x640 [<ffffffff81905f42>] ? _raw_write_unlock_irq+0x12/0x30 [<ffffffff81905f69>] ? _raw_spin_unlock_irq+0x9/0x10 [<ffffffff81901896>] ? __schedule+0x2c6/0x710 [<ffffffff810022a4>] exit_to_usermode_loop+0x74/0x90 [<ffffffff81002a56>] prepare_exit_to_usermode+0x26/0x30 [<ffffffff81906d1b>] retint_user+0x8/0x10 This patch uses this_cpu_ptr() instead of get_cpu_ptr(), since preemption is already disabled by the caller. Signed-off-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 95ff4ca26c49 ("perf/core: Free AUX pages in unmap path") Link: http://lkml.kernel.org/r/20160824091905.GA16944@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vhost bugfix from Michael Tsirkin: "This includes a single bugfix for vhost-scsi" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: fix reuse of &vq->iov[out] in response
2016-08-24clocksource/drivers/pxa: Fix include files for compilationBaoyou Xie
We get 1 warning about global functions without a declaration in the clocksource/drivers/pxa driver when building with W=1: drivers/clocksource/pxa_timer.c:221:13: warning: no previous prototype for 'pxa_timer_nodt_init' [-Wmissing-prototypes] void __init pxa_timer_nodt_init(int irq, void __iomem *base, In fact, this function is declared in pxa.h, so this patch add missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: daniel.lezcano@linaro.org Cc: xie.baoyou@zte.com.cn Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1471965569-4104-1-git-send-email-baoyou.xie@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-24MAINTAINERS: Add ARM ARCHITECTED TIMER entryMark Rutland
The ARM architected timer driver falls under the drivers/clocksource/ catch-all in MAINTAINERS, and get_maintainers.pl doesn't suggest a number of people who should be Cc'd. The ARM architected timer is a core component of ARMv7+VE and ARMv8, and is critical to the correct operation of both architecture ports (and their respective KVM code), and patches to it should have review by knowledgeable interested parties. This patch adds a MAINTAINERS entry for the driver and its low-level arch components, such that get_maintainer.pl will always include relevant interested parties for modifications to the driver. For the timebeing, this means myself and Marc Zyngier. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1470737036-2082-1-git-send-email-mark.rutland@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-24ALSA: hda/realtek - fix headset mic detection for MSI MS-B120Anisse Astier
MSI Cubi MS-B120 needs the same fixup as the Gigabyte BXBT-2807 for its mic to work. They both use a single 3-way jack for both mic and headset with an ALC283 codec, with the same pins used. Cc: Daniel Drake <drake@endlessm.com> Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>