aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-19Linux 4.10v4.10Linus Torvalds
2017-02-19Fix missing sanity check in /dev/sgAl Viro
What happens is that a write to /dev/sg is given a request with non-zero ->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing to an array full of empty iovecs. Having write permission to /dev/sg shouldn't be equivalent to the ability to trigger BUG_ON() while holding spinlocks... Found by Dmitry Vyukov and syzkaller. [ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the underlying issue. - Linus ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-19scsi: don't BUG_ON() empty DMA transfersJohannes Thumshirn
Don't crash the machine just because of an empty transfer. Use WARN_ON() combined with returning an error. Found by Dmitry Vyukov and syzkaller. [ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON() might still be a cause of excessive log spamming. NOTE! If this warning ever triggers, we may end up leaking resources, since this doesn't bother to try to clean the command up. So this WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is much worse. People really need to stop using BUG_ON() for "this shouldn't ever happen". It makes pretty much any bug worse. - Linus ] Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: James Bottomley <jejb@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-18ipv6: release dst on error in ip6_dst_lookup_tailWillem de Bruijn
If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped check, release the dst before returning an error. Fixes: ec5e3b0a1d41 ("ipv6: Inhibit IPv4-mapped src address on the wire.") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-18Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Two more bugfixes that came in during this week: - a defconfig change to enable a vital driver used on some Qualcomm based phones. This was already queued for 4.11, but the maintainer asked to have it in 4.10 after all. - a regression fix for the reset controller framework, this got broken by a typo in the 4.10 merge window" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: enable Qualcomm RPMCC reset: fix shared reset triggered_count decrement on error
2017-02-18Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A couple of fixes from Kees concerning problems he spotted with our user access support" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user() ARM: 8657/1: uaccess: consistently check object sizes
2017-02-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "Make the build clean by working around yet another GCC stupidity" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vm86: Fix unused variable warning if THP is disabled
2017-02-18Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "Move the futex init function to core initcall so user mode helper does not run into an uninitialized futex syscall" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Move futex_init() to core_initcall
2017-02-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two small fixes:: - Prevent deadlock on the tick broadcast lock. Found and fixed by Mike. - Stop using printk() in the timekeeping debug code to prevent a deadlock against the scheduler" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Use deferred printk() in debug code tick/broadcast: Prevent deadlock on tick_broadcast_lock
2017-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix leak in dpaa_eth error paths, from Dan Carpenter. 2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov. 3) fanout_release() cannot be invoked from atomic contexts, from Anoob Soman. 4) Fix bogus attempt at lockdep annotation in IRDA. 5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: irda: Fix lockdep annotations in hashbin_delete(). vxlan: fix oops in dev_fill_metadata_dst dccp: fix freeing skb too early for IPV6_RECVPKTINFO dpaa_eth: small leak on error packet: Do not call fanout_release from atomic contexts
2017-02-18printk: use rcuidle console tracepointSergey Senozhatsky
Use rcuidle console tracepoint because, apparently, it may be issued from an idle CPU: hw-breakpoint: Failed to enable monitor mode on CPU 0. hw-breakpoint: CPU 0 failed to disable vector catch =============================== [ ERR: suspicious RCU usage. ] 4.10.0-rc8-next-20170215+ #119 Not tainted ------------------------------- ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 2, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by swapper/0/0: #0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54 #1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119 Hardware name: Generic OMAP4 (Flattened Device Tree) console_unlock vprintk_emit vprintk_default printk reset_ctrl_regs dbg_cpu_pm_notify notifier_call_chain cpu_pm_exit omap_enter_idle_coupled cpuidle_enter_state cpuidle_enter_state_coupled do_idle cpu_startup_entry start_kernel This RCU warning, however, is suppressed by lockdep_off() in printk(). lockdep_off() increments the ->lockdep_recursion counter and thus disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want lockdep to be enabled "current->lockdep_recursion == 0". Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <rmk@armlinux.org.uk> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-18ARM: multi_v7_defconfig: enable Qualcomm RPMCCAndy Gross
This patch enables the Qualcomm RPM based Clock Controller present on A-family boards. Signed-off-by: Andy Gross <andy.gross@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-17irda: Fix lockdep annotations in hashbin_delete().David S. Miller
A nested lock depth was added to the hasbin_delete() code but it doesn't actually work some well and results in tons of lockdep splats. Fix the code instead to properly drop the lock around the operation and just keep peeking the head of the hashbin queue. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fix from Jens Axboe: "A single fix for a lockdep splat reported by Thomas and Gabriel" * 'for-linus' of git://git.kernel.dk/linux-block: cfq-iosched: don't call wbt_disable_default() with IRQs disabled
2017-02-17vxlan: fix oops in dev_fill_metadata_dstPaolo Abeni
Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device") vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL dst_cache pointer, so the latter should explicitly check for valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") removed said check. As a result is possible to trigger a null pointer access calling vxlan_fill_metadata_dst(), e.g. with: ovs-vsctl add-br ovs-br0 ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \ type=vxlan options:remote_ip=192.168.1.1 \ options:key=1234 options:dst_port=4789 ofport_request=10 ip address add dev ovs-br0 172.16.1.2/24 ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \ targets=\"172.16.1.1:1234\" sampling=1 iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234 This commit addresses the issue passing to vxlan_get_route() the dst_cache already available into the lwt info processed by vxlan_fill_metadata_dst(). Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17dccp: fix freeing skb too early for IPV6_RECVPKTINFOAndrey Konovalov
In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet is forcibly freed via __kfree_skb in dccp_rcv_state_process if dccp_v6_conn_request successfully returns. However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb is saved to ireq->pktopts and the ref count for skb is incremented in dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed in dccp_rcv_state_process. Fix by calling consume_skb instead of doing goto discard and therefore calling __kfree_skb. Similar fixes for TCP: fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed. 0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now simply consumed Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge tag 'powerpc-4.10-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix from Paul: we can not use the radix MMU under a hypervisor for now. Although the code checked if the processor supports radix, that is not sufficient" * tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Disable use of radix under a hypervisor
2017-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "Just a single change to Elan touchpad driver to recognize a new ACPI ID" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ELAN0605 to the ACPI table
2017-02-17Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "I2C has a revert to fix a regression" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: designware: detect when dynamic tar update is possible"
2017-02-17Merge tag 'mmc-v4.10-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Fix multi-bit bus width without high-speed mode for MMC" * tag 'mmc-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: fix multi-bit bus width without high-speed mode
2017-02-17Merge tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB bugfixes frfom Jon Mason: "NTB bug fixes to address a crash when unloading the ntb module, a DMA engine unmap leak, allowing the proper queue choice, and clearing the SKX irq bit" * tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb: ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly ntb_transport: Pick an unused queue ntb: ntb_perf missing dmaengine_unmap_put NTB: ntb_transport: fix debugfs_remove_recursive
2017-02-17dpaa_eth: small leak on errorDan Carpenter
This should be >= instead of > here. It means that we don't increment the free count enough so it becomes off by one. Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux ↵Arnd Bergmann
into fixes Pull "Reset controller fixes for v4.10" from Philipp Zabel: - Remove erroneous negation of the error check of the reset function to decrement trigger_count in the error case, not on success. This fixes shared resets to actually only trigger once, as intended. * tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux: reset: fix shared reset triggered_count decrement on error
2017-02-17packet: Do not call fanout_release from atomic contextsAnoob Soman
Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17reset: fix shared reset triggered_count decrement on errorJerome Brunet
For a shared reset, when the reset is successful, the triggered_count is incremented when trying to call the reset callback, so that another device sharing the same reset line won't trigger it again. If the reset has not been triggered successfully, the trigger_count should be decremented. The code does the opposite, and decrements the trigger_count on success. As a consequence, another device sharing the reset will be able to trigger it again. Fixed be removing negation in from of the error code of the reset function. Fixes: 7da33a37b48f ("reset: allow using reset_control_reset with shared reset") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-16ntb: ntb_hw_intel: link_poll isn't clearing the pending status properlyDave Jiang
On Skylake hardware, the link_poll isn't clearing the pending interrupt bit. Adding a new function for SKX that handles clearing of status bit the right way. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16ntb_transport: Pick an unused queueThomas VanSelus
Fix typo causing ntb_transport_create_queue to select the first queue every time, instead of using the next free queue. Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16ntb: ntb_perf missing dmaengine_unmap_putDave Jiang
In the normal I/O execution path, ntb_perf is missing a call to dmaengine_unmap_put() after submission. That causes us to leak unmap objects. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 8a7b6a77 ("ntb: ntb perf tool") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16NTB: ntb_transport: fix debugfs_remove_recursiveAllen Hubbe
The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level directory must not be later than debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory. Otherwise, the sub-level directory will not exist, and it would be invalid (panic) to attempt to remove it. This removes the top-level directory last, after sub-level directories have been cleaned up. Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16Merge tag 'drm-fixes-for-v4.10-final' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just two last minute fixes, one for DP MST oopses and one for a radeon regression" * tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor drm/dp/mst: fix kernel oops when turning off secondary monitor
2017-02-17Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One regression fix for interlaced modes on radeon * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
2017-02-16Revert "nohz: Fix collision between tick and other hrtimers"Linus Torvalds
This reverts commit 24b91e360ef521a2808771633d76ebc68bd5604b and commit 7bdb59f1ad47 ("tick/nohz: Fix possible missing clock reprog after tick soft restart") that depends on it, Pavel reports that it causes occasional boot hangs for him that seem to depend on just how the machine was booted. In particular, his machine hangs at around the PCI fixups of the EHCI USB host controller, but only hangs from cold boot, not from a warm boot. Thomas Gleixner suspecs it's a CPU hotplug interaction, particularly since Pavel also saw suspend/resume issues that seem to be related. We're reverting for now while trying to figure out the root cause. Reported-bisected-and-tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # reverted commits were marked for stable Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16Merge tag 'media/v4.10-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A regression fix that makes the Siano driver to work again after the CONFIG_VMAP_STACK change" * tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] siano: make it work again with CONFIG_VMAP_STACK
2017-02-16vfs: fix uninitialized flags in splice_to_pipe()Miklos Szeredi
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # 2.6.17+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a use after free bug introduced in 4.2 and using an uninitialized value introduced in 4.9" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix uninitialized flags in pipe_buffer fuse: fix use after free issue in fuse_dev_do_read()
2017-02-16Merge tag 'pci-v4.10-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Add back pcie_pme_remove() so we free the IRQ when removing PCIe port devices; previously the leaked IRQ caused an MSI BUG_ON" * tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PME: Restore pcie_pme_driver.remove
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) In order to avoid problems in the future, make cgroup bpf overriding explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov. 2) LLC sets skb->sk without proper skb->destructor and this explodes, fix from Eric Dumazet. 3) Make sure when we have an ipv4 mapped source address, the destination is either also an ipv4 mapped address or ipv6_addr_any(). Fix from Jonathan T. Leighton. 4) Avoid packet loss in fec driver by programming the multicast filter more intelligently. From Rui Sousa. 5) Handle multiple threads invoking fanout_add(), fix from Eric Dumazet. 6) Since we can invoke the TCP input path in process context, without BH being disabled, we have to accomodate that in the locking of the TCP probe. Also from Eric Dumazet. 7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we aren't even updating that sysctl value. From Marcus Huewe. 8) Fix endian bugs in ibmvnic driver, from Thomas Falcon. [ This is the second version of the pull that reverts the nested rhashtable changes that looked a bit too scary for this late in the release - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) rhashtable: Revert nested table changes. ibmvnic: Fix endian errors in error reporting output ibmvnic: Fix endian error when requesting device capabilities net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification net: xilinx_emaclite: fix freezes due to unordered I/O net: xilinx_emaclite: fix receive buffer overflow bpf: kernel header files need to be copied into the tools directory tcp: tcp_probe: use spin_lock_bh() uapi: fix linux/if_pppol2tp.h userspace compilation errors packet: fix races in fanout_add() ibmvnic: Fix initial MTU settings net: ethernet: ti: cpsw: fix cpsw assignment in resume kcm: fix a null pointer dereference in kcm_sendmsg() net: fec: fix multicast filtering hardware setup ipv6: Handle IPv4-mapped src to in6addr_any dst. ipv6: Inhibit IPv4-mapped src address on the wire. net/mlx5e: Disable preemption when doing TC statistics upcall rhashtable: Add nested tables tipc: Fix tipc_sk_reinit race conditions gfs2: Use rhashtable walk interface in glock_hash_walk ...
2017-02-16drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursorMichel Dänzer
The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds") Cc: stable@vger.kernel.org Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-16ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()Kees Cook
The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16ARM: 8657/1: uaccess: consistently check object sizesKees Cook
In commit 76624175dcae ("arm64: uaccess: consistently check object sizes"), the object size checks are moved outside the access_ok() so that bad destinations are detected before hitting the "memset(dest, 0, size)" in the copy_from_user() failure path. This makes the same change for arm, with attention given to possibly extracting the uaccess routines into a common header file for all architectures in the future. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-02-16cfq-iosched: don't call wbt_disable_default() with IRQs disabledJens Axboe
wbt_disable_default() calls del_timer_sync() to wait for the wbt timer to finish before disabling throttling. We can't do this with IRQs disable. This fixes a lockdep splat on boot, if non-root cgroups are used. Reported-by: Gabriel C <nix.or.die@gmail.com> Fixes: 87760e5eef35 ("block: hook up writeback throttling") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-16fuse: fix uninitialized flags in pipe_bufferMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()") Cc: <stable@vger.kernel.org> # 4.9+
2017-02-15rhashtable: Revert nested table changes.David S. Miller
This reverts commits: 6a25478077d987edc5e2f880590a2bc5fcab4441 9dbbfb0ab6680c6a85609041011484e6658e7d3c 40137906c5f55c252194ef5834130383e639536f It's too risky to put in this late in the release cycle. We'll put these changes into the next merge window instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge tag 'drm-misc-fixes-2017-02-15' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes dp/mst oops fix for v4.10 * tag 'drm-misc-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc: drm/dp/mst: fix kernel oops when turning off secondary monitor
2017-02-16powerpc/64: Disable use of radix under a hypervisorPaul Mackerras
Currently, if the kernel is running on a POWER9 processor under a hypervisor, it may try to use the radix MMU even though it doesn't have the necessary code to do so (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). If the hypervisor supports both radix and HPT, then it will set up the guest to use HPT (since the guest doesn't request radix in the CAS call), but if the radix feature bit is set in the ibm,pa-features property (which is valid, since ibm,pa-features is defined to represent the capabilities of the processor) the guest will try to use radix, resulting in a crash when it turns the MMU on. This makes the minimal fix for the current code, which is to disable radix unless we are running in hypervisor mode. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-15ibmvnic: Fix endian errors in error reporting outputThomas Falcon
Error reports received from firmware were not being converted from big endian values, leading to bogus error codes reported on little endian systems. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15ibmvnic: Fix endian error when requesting device capabilitiesThomas Falcon
When a vNIC client driver requests a faulty device setting, the server returns an acceptable value for the client to request. This 64 bit value was incorrectly being swapped as a 32 bit value, resulting in loss of data. This patch corrects that by using the 64 bit swap function. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notificationMarcus Huewe
When setting a neigh related sysctl parameter, we always send a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when executing sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000 a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated. This is caused by commit 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes"). According to the commit's description, it was intended to generate such an event when setting the "delay_first_probe_time" sysctl parameter. In order to fix this, only generate this event when actually setting the "delay_first_probe_time" sysctl parameter. This fix should not have any unintended side-effects, because all but one registered netevent callbacks check for other netevent event types (the registered callbacks were obtained by grepping for "register_netevent_notifier"). The only callback that uses the NETEVENT_DELAY_PROBE_TIME_UPDATE event is mlxsw_sp_router_netevent_event() (in drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case of this event, it only accesses the DELAY_PROBE_TIME of the passed neigh_parms. Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes") Signed-off-by: Marcus Huewe <suse-tux@gmx.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix freezes due to unordered I/OAnssi Hannula
The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO functions") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: xilinx_emaclite: fix receive buffer overflowAnssi Hannula
xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: David S. Miller <davem@davemloft.net>