aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-08-29spi/rockchip: Avoid accidentally turning off the clockDoug Anderson
If our client is requesting a clock that is above the maximum clock then the following division will result in 0: rs->max_freq / rs->speed We'll then program 0 into the SPI_BAUDR register. The Rockchip TRM says: "If the value is 0, the serial output clock (sclk_out) is disabled." It's much better to end up with the fastest possible clock rather than a clock that is off, so enforce a minimum value. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-28ext4: fix same-dir rename when inline data directory overflowsDarrick J. Wong
When performing a same-directory rename, it's possible that adding or setting the new directory entry will cause the directory to overflow the inline data area, which causes the directory to be converted to an extent-based directory. Under this circumstance it is necessary to re-read the directory when deleting the old dirent because the "old directory" context still points to i_block in the inode table, which is now an extent tree root! The delete fails with an FS error, and the subsequent fsck complains about incorrect link counts and hardlinked directories. Test case (originally found with flat_dir_test in the metadata_csum test program): # mkfs.ext4 -O inline_data /dev/sda # mount /dev/sda /mnt # mkdir /mnt/x # touch /mnt/x/changelog.gz /mnt/x/copyright /mnt/x/README.Debian # sync # for i in /mnt/x/*; do mv $i $i.longer; done # ls -la /mnt/x/ total 0 -rw-r--r-- 1 root root 0 Aug 25 12:03 changelog.gz.longer -rw-r--r-- 1 root root 0 Aug 25 12:03 copyright -rw-r--r-- 1 root root 0 Aug 25 12:03 copyright.longer -rw-r--r-- 1 root root 0 Aug 25 12:03 README.Debian.longer (Hey! Why are there four files now??) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28jbd2: fix descriptor block size handling errors with journal_csumDarrick J. Wong
It turns out that there are some serious problems with the on-disk format of journal checksum v2. The foremost is that the function to calculate descriptor tag size returns sizes that are too big. This causes alignment issues on some architectures and is compounded by the fact that some parts of jbd2 use the structure size (incorrectly) to determine the presence of a 64bit journal instead of checking the feature flags. Therefore, introduce journal checksum v3, which enlarges the descriptor block tag format to allow for full 32-bit checksums of journal blocks, fix the journal tag function to return the correct sizes, and fix the jbd2 recovery code to use feature flags to determine 64bitness. Add a few function helpers so we don't have to open-code quite so many pieces. Switching to a 16-byte block size was found to increase journal size overhead by a maximum of 0.1%, to convert a 32-bit journal with no checksumming to a 32-bit journal with checksum v3 enabled. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reported-by: TR Reardon <thomas_reardon@hotmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28jbd2: fix infinite loop when recovering corrupt journal blocksDarrick J. Wong
When recovering the journal, don't fall into an infinite loop if we encounter a corrupt journal block. Instead, just skip the block and return an error, which fails the mount and thus forces the user to run a full filesystem fsck. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28ext4: update i_disksize coherently with block allocation on error pathDmitry Monakhov
In case of delalloc block i_disksize may be less than i_size. So we have to update i_disksize each time we allocated and submitted some blocks beyond i_disksize. We weren't doing this on the error paths, so fix this. testcase: xfstest generic/019 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28dm crypt: fix access beyond the end of allocated spaceMikulas Patocka
The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-28Merge tag 'backlight-fixes-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight fix from Lee Jones: "One simple fix to invalidate GPIO non-request" * tag 'backlight-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: pwm-backlight: Fix bogus request for GPIO#0 when instantiated from DT
2014-08-28Merge tag 'mfd-fixes-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd fixes from Lee Jones: "Couple of simple fixes due for the 3.17 rcs (and a sneaky document addition that slipped from the previous pull-request)" * tag 'mfd-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators mfd: tc3589x: Add device tree bindings mfd: ab8500-core: Use 'ifdef' for config options mfd: htc-i2cpld: Fix %d confusingly prefixed with 0x in format string mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format string
2014-08-28Merge tag 'pinctrl-v3.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin-control fixes from Linus Walleij: "My first (a bit delayed) pack of pin control fixes for the v3.17 series, only driver fixes: - SH-PFC (Renesas) r8a7791 CAN bus pin group problem - Rockchip (GPIO0 configuration) - Tegra-xusb (interrupt handling) - Exynos (GPIO interrupt locking) - Qualcomm (fix misleading example interrupts) - minor non-critical fixes for abx500 and AT91 also sneaked in, because I initially intended this pull for post RC-1, hope it's still OK" * tag 'pinctrl-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: apq8064: Correct interrupts in example pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0x pinctrl: abx500: remove useless check pinctrl: tegra-xusb: testing wrong variable in probe() pinctrl: tegra-xusb: fix an off by one test pinctrl: rockchip: fix rk3288 gpio0 configuration sh-pfc: r8a7791: fix CAN pin groups
2014-08-28Merge tag 'for-3.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf Pull dma-buf fixes from Sumit Semwal: "The major changes for 3.17 already went via Greg-KH's tree this time as well; this is a small pull request for dma-buf - all documentation related" * tag 'for-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: dma-buf/fence: Fix one more kerneldoc warning dma-buf/fence: Fix a kerneldoc warning Documentation/dma-buf-sharing.txt: update API descriptions
2014-08-28Merge tag 'sound-3.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here contains not many exciting changes but just a few minor ones: An off-by-one proc write fix, a couple of trivial incldue guard fixes, Acer laptop pinconfig fix, and a fix for DSD formats that are still rarely used" * tag 'sound-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set up initial pins for Acer Aspire V5 ALSA: pcm: Fix the silence data for DSD formats ALSA: ctxfi: ct20k1reg: Fix typo in include guard ALSA: hda: ca0132_regs.h: Fix typo in include guard ALSA: core: fix buffer overflow in snd_info_get_line()
2014-08-28Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing major, one core oops fixes, some radeon oops fixes, some sti driver fixups, msm driver fixes and a minor Kconfig update for the ww mutex debugging" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ast: Add missing entry to dclk_table[] drm: fix division-by-zero on dumb_create() ww-mutex: clarify help text for DEBUG_WW_MUTEX_SLOWPATH radeon: Test for PCI root bus before assuming bus->self drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2) drm/radeon: save/restore the PD addr on suspend/resume drm/msm: Fix missing unlock on error in msm_fbdev_create() drm/msm: fix compile error for non-dt builds drm/msm/mdp4: request vblank during modeset drm/msm: avoid flood of kernel logs on faults drm: sti: Add missing dependency on RESET_CONTROLLER drm: sti: Make of_device_id array const drm: sti: Fix return value check in sti_drm_platform_probe() drm: sti: hda: fix return value check in sti_hda_probe() drm: sti: hdmi: fix return value check in sti_hdmi_probe() drm: sti: tvout: fix return value check in sti_tvout_probe()
2014-08-28mfd: twl4030-power: Fix PM idle pin configuration to not conflict with ↵Tony Lindgren
regulators Commit 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) added support for configuring the PMIC to cut off resources during deeper idle states to save power. This however caused regression for n900 display power that needed the PMIC configuration to be disabled with commit d937678ab625 (ARM: dts: Revert enabling of twl configuration for n900). Turns out the root cause of the problem is that we must use TWL4030_RESCONFIG_UNDEF instead of DEV_GRP_NULL to avoid disabling regulators that may have been enabled before the init function for twl4030-power.c runs. With TWL4030_RESCONFIG_UNDEF we let the regulator framework control the regulators like it should. Here we need to only configure the sys_clken and sys_off_mode triggers for the regulators that cannot be done by the regulator framework as it's not running at that point. This allows us to enable the PMIC configuration for n900. Fixes: 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) Cc: stable@vger.kernel.org # v3.16 Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-28mfd: tc3589x: Add device tree bindingsLinus Walleij
This defines the device tree bindings for the Toshiba TC3589x series of multi-purpose expanders. Only the stuff I can test is defined: GPIO and keypad. Others may implement more subdevices further down the road. This is to complement commit a435ae1d51e2f18414f2a87219fdbe068231e692 "mfd: Enable the tc3589x for Device Tree" which left off the definition of the device tree bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-28cfq-iosched: Add comments on update timing of weightToshiaki Makita
Explain that weight has to be updated on activation. This complements previous fix e15693ef18e1 ("cfq-iosched: Fix wrong children_weight calculation"). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-28dma-buf/fence: Fix one more kerneldoc warningThierry Reding
The seqno_fence_init() function's cond argument isn't described in the kerneldoc comment. Fix that to silence a warning when building DocBook documentation. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-08-28dma-buf/fence: Fix a kerneldoc warningThierry Reding
kerneldoc doesn't know how to parse variables, so don't let it try. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-08-28Documentation/dma-buf-sharing.txt: update API descriptionsGioh Kim
Update some descriptions for API arguments and descriptions. Signed-off-by: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-08-28drm/ast: Add missing entry to dclk_table[]Y.C. Chen
This avoid reading past the end of the list for certain modes Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Egbert Eich <eich@freedesktop.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28Merge branch 'drm-3.17-rc2-sti-fixes' of ↵Dave Airlie
git://git.linaro.org/people/benjamin.gaignard/kernel into drm-fixes I have tested the 6 patches send on mailing list since you merge the sti driver. I haven't seen issue with those patches except for the missing dependency on Kconfig where I have change "depends on" to "select". * 'drm-3.17-rc2-sti-fixes' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: Add missing dependency on RESET_CONTROLLER drm: sti: Make of_device_id array const drm: sti: Fix return value check in sti_drm_platform_probe() drm: sti: hda: fix return value check in sti_hda_probe() drm: sti: hdmi: fix return value check in sti_hdmi_probe() drm: sti: tvout: fix return value check in sti_tvout_probe()
2014-08-28Merge branch 'msm-fixes-3.17' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes misc msm fixes from Rob. * 'msm-fixes-3.17' of git://people.freedesktop.org/~robclark/linux: drm/msm: Fix missing unlock on error in msm_fbdev_create() drm/msm: fix compile error for non-dt builds drm/msm/mdp4: request vblank during modeset drm/msm: avoid flood of kernel logs on faults
2014-08-27ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface listsRajendra Nayak
To deal with IPs which are specific to dra74x and dra72x, maintain seperate ocp interface lists, while keeping the common list for all common IPs. Move USB OTG SS4 to dra74x only list since its unavailable in dra72x and is giving an abort during boot. The dra72x only list is empty for now and a placeholder for future hwmod additions which are specific to dra72x. Fixes: d904b38df0db13 ("ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss") Reported-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Nishanth Menon <nm@ti.com> [paul@pwsan.com: fixed comment style to conform with CodingStyle] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-08-27ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variantsRajendra Nayak
Use the corresponding compatibles to identify the devices. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-08-28drm: fix division-by-zero on dumb_create()David Herrmann
Kinda unexpected, but DIV_ROUND_UP() can overflow if passed an argument bigger than UINT_MAX - DIVISOR. Fix this by testing for "!cpp" before using it in the following division. Note that DIV_ROUND_UP() is defined as: #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) ..this will obviously overflow if (n + d - 1) is bigger than UINT_MAX. Reported-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28ww-mutex: clarify help text for DEBUG_WW_MUTEX_SLOWPATHRob Clark
We really don't want distro's enabling this in their kernels. Try and make that more clear. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just a few more radeon fixes for 3.17. * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: radeon: Test for PCI root bus before assuming bus->self drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2) drm/radeon: save/restore the PD addr on suspend/resume
2014-08-27Merge branch 'sec-v3.17-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security Pull tomoyo fix from Serge Hallyn. * 'sec-v3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security: tomoyo: Fix pathname calculation breakage.
2014-08-27USB: fix build error with CONFIG_PM_RUNTIME disabledGreg Kroah-Hartman
commit bdd405d2a528 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Michael Welling <mwelling@emacinc.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: s5pv210: Remove spurious __init annotation cpufreq: intel_pstate: Add CPU ID for Braswell processor intel_pstate: Turn per cpu printk into pr_debug
2014-08-28cpufreq: s5pv210: Remove spurious __init annotationMark Brown
Since this is a platform driver and can be probed at any time we can't annotate funtions in the probe path as __init, the code can't safely be discarded at the end of kernel init. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28Merge branches 'acpi-scan', 'acpi-ec' and 'acpi-lpss'Rafael J. Wysocki
* acpi-scan: ACPI: Run fixed event device notifications in process context ACPI / scan: Allow ACPI drivers to bind to PNP device objects * acpi-ec: ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set * acpi-lpss: ACPI / LPSS: Add ACPI IDs for Intel Braswell
2014-08-28cpufreq: intel_pstate: Add CPU ID for Braswell processorMika Westerberg
This is pretty much the same as Intel Baytrail, only the CPU ID is different. Add the new ID to the supported CPU list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28intel_pstate: Turn per cpu printk into pr_debugAndi Kleen
On larger systems intel_pstate currently spams the boot up log with its "Intel pstate controlling ..." message for each CPU. It's the only subsystem that prints a message for each CPU. Turn the message into a pr_debug. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-27ext4: fix transaction issues for ext4_fallocate and ext_zero_rangeDmitry Monakhov
After commit f282ac19d86f we use different transactions for preallocation and i_disksize update which result in complain from fsck after power-failure. spotted by generic/019. IMHO this is regression because fs becomes inconsistent, even more 'e2fsck -p' will no longer works (which drives admins go crazy) Same transaction requirement applies ctime,mtime updates testcase: xfstest generic/019 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-27ext4: fix incorect journal credits reservation in ext4_zero_rangeDmitry Monakhov
Currently we reserve only 4 blocks but in worst case scenario ext4_zero_partial_blocks() may want to zeroout and convert two non adjacent blocks. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-27Revert "usb: ehci/ohci-exynos: Fix PHY getting sequence"Greg Kroah-Hartman
This reverts commit 039368901ad0a6476c7ecf0cfe4f84d735e30135. Vivek writes: We not longer need this patch, since we have planned to remove the usb-phy drivers for samsung [1], we have completely deleted the support for the the same from ohci-exynos and ehci-exynos drivers too [2]. Sorry for the confusion, but this patch can be dropped and instead we can pick the patches in [2]. [1] http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35774.html [2] https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35695.html https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35696.html Cc: Sachin Kamat <sachin.kamat@samsung.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Sachin Kamat <sachin.kamat@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27Merge tag 'renesas-clock-fixes-for-v3.17' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Clock Fixes For v3.17" from Simon Horman: * ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR This resolves a problem introduced by 4bfb358b1d6cdeff ("ARM: shmobile: Add r8a7791 legacy SDHI clocks") which was included in v3.15. This fix does not have any run-time affect at this time. * ARM: shmobile: r8a7790: add missing 0x0100 for SDCKCR This resolves a problem introduced by 9f13ee6f83c52065 ("ARM: shmobile: r8a7790: add div4 clocks") which was included in v3.11. This fix does not have any run-time affect at this time. * ARM: shmobile: sh73a0: Remove spurious 0x from SCIFB clock name This resolves a problem introduced by a0f7e7496d56ac2d ("ARM: shmobile: sh73a0: add CMT1 clock support for DT") which was included in v3.17-rc1. This fix does not have any run-time affect at this time as the clock in question is used by a SCIF device that is not enabled by default. * tag 'renesas-clock-fixes-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR ARM: shmobile: r8a7790: add missing 0x0100 for SDCKCR ARM: shmobile: sh73a0: Remove spurious 0x from SCIFB clock name Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-27Merge tag 'imx-fixes-3.17-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.17, 2nd take" from Shawn Guo: i.MX fixes for 3.17, 2nd take: - Fixes suspend/resume issue on imx53-qsrb due to PMIC IRQ pin configuration missing - A couple small SolidRun board fixes/correction from Rabeeh and Russell * tag 'imx-fixes-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: microsom-ar8035: MDIO pad must be set open drain ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration ARM: dts: imx53-qsrb: Fix suspend/resume Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-27Merge tag 'omap-for-v3.17/fixes-against-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.17-rc2" from Tony Lindgren: Fixes for omaps, mostly to revert NAND back to using software ECC by default as that's what many boards expect. Also fixes for omap5 clocks, PM wake-up events, GPIO interrupt cells for dra7, and few other minor fixes. * tag 'omap-for-v3.17/fixes-against-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled ARM: dts: Enable UART wake-up events for beagleboard ARM: dts: Remove twl6030 clk32g "regulator" ARM: OMAP2+: omap_device: remove warning that clk alias already exists ARM: OMAP: fix %d confusingly prefixed with 0x in format string ARM: dts: DRA7: fix interrupt-cells for GPIO mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc() ARM: dts: omap3430-sdp: Revert to using software ECC for NAND ARM: OMAP2+: GPMC: Support Software ECC scheme via DT mtd: nand: omap: Revert to using software ECC by default
2014-08-27MAINTAINERS: catch special Rockchip code locationsHeiko Stübner
Add some more locations that aren't catched by the general wildcard. This includes the devicetree files, clock directory, rk3x i2c driver, everything in a third layer under drivers like iio/adc/rockchip_saradc.c and the i2s driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-27radeon: Test for PCI root bus before assuming bus->selfAlex Williamson
If we assign a Radeon device to a virtual machine, we can no longer assume a fixed hardware topology, like the GPU having a parent device. This patch simply adds a few pci_is_root_bus() tests to avoid passing a NULL pointer to PCI access functions, allowing the radeon driver to work in a QEMU 440FX machine with an assigned HD8570 on the emulated PCI root bus. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-27xhci: Disable streams on Via XHCI with device-id 0x3432Hans de Goede
This is a bit bigger hammer then I would like to use for this, but for now it will have to make do. I'm working on getting my hands on one of these so that I can try to get streams to work (with a quirk flag if necessary) and then we can re-enable them. For now this at least makes uas capable disk enclosures work again by forcing fallback to the usb-storage driver. https://bugzilla.kernel.org/show_bug.cgi?id=79511 Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27USB: serial: fix potential heap buffer overflowJohan Hovold
Make sure to verify the number of ports requested by subdriver to avoid writing beyond the end of fixed-size array in interface data. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of ports requested by a subdriver (which could have been determined from device descriptors) did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27USB: serial: fix potential stack buffer overflowJohan Hovold
Make sure to verify the maximum number of endpoints per type to avoid writing beyond the end of a stack-allocated array. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of endpoints of a certain type reported by a device did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fixes for potential memory corruption problems in magicmouse and picolcd drivers (the HW would have to be manufactured to be deliberately evil to trigger those) which were found by Steven Vittitoe - fix for false error message appearing in dmesg from logitech-dj driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: picolcd: sanity check report size in raw_event() callback HID: magicmouse: sanity check report size in raw_event() callback HID: logitech-dj: prevent false errors to be shown
2014-08-27spi: dw: fix kernel crash due to NULL pointer dereferenceAndy Shevchenko
The obvious fix after the commit d9c73bb8a3a5 "spi: dw: add support for gpio controlled chip select". This patch fixes the issue by using locally defined temporary variable. Fixes: d9c73bb8a3a5 (spi: dw: add support for gpio controlled chip select) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org>
2014-08-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "The biggest of these comes from Liu Bo, who tracked down a hang we've been hitting since moving to kernel workqueues (it's a btrfs bug, not in the generic code). His patch needs backporting to 3.16 and 3.15 stable, which I'll send once this is in. Otherwise these are assorted fixes. Most were integrated last week during KS, but I wanted to give everyone the chance to test the result, so I waited for rc2 to come out before sending" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: fix task hang under heavy compressed write Btrfs: fix filemap_flush call in btrfs_file_release Btrfs: fix crash on endio of reading corrupted block btrfs: fix leak in qgroup_subtree_accounting() error path btrfs: Use right extent length when inserting overlap extent map. Btrfs: clone, don't create invalid hole extent map Btrfs: don't monopolize a core when evicting inode Btrfs: fix hole detection during file fsync Btrfs: ensure tmpfile inode is always persisted with link count of 0 Btrfs: race free update of commit root for ro snapshots Btrfs: fix regression of btrfs device replace Btrfs: don't consider the missing device when allocating new chunks Btrfs: Fix wrong device size when we are resizing the device Btrfs: don't write any data into a readonly device when scrub Btrfs: Fix the problem that the replace destroys the seed filesystem btrfs: Return right extent when fiemap gives unaligned offset and len. Btrfs: fix wrong extent mapping for DirectIO Btrfs: fix wrong write range for filemap_fdatawrite_range() Btrfs: fix wrong missing device counter decrease Btrfs: fix unzeroed members in fs_devices when creating a fs from seed fs ...
2014-08-27Merge tag 'trace-fixes-v3.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace buffer epoll hang fix from Steven Rostedt: "Josef Bacik found a bug in the ring_buffer_poll_wait() where the condition variable (waiters_pending) was set before being added to the poll queue via poll_wait(). This allowed for a small race window to happen where an event could come in, check the condition variable see it set to true, clear it, and then wake all the waiters. But because the waiter set the variable before adding itself to the queue, the waker could have cleared the variable after it was set and then miss waking it up as it wasn't added to the queue yet. Discussing this bug, we realized that a memory barrier needed to be added too, for the rare case that something polls for a single trace event to happen (and just one, no more to come in), and miss the wakeup due to memory ordering. Ideally, a memory barrier needs to be added on the writer side too, but as that will kill tracing performance and this is for a situation that tracing wasn't even designed for (who traces one instance of an event, use a printk instead!), this isn't worth adding the barrier. But we can in the future add the barrier for when the buffer goes from empty to the first event, as that would cover this case" * tag 'trace-fixes-v3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: Fix epoll hang when we race with new entries
2014-08-27spi: dw-pci: fix bug when regs left uninitializedAndy Shevchenko
The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-08-27ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part numberJuri Lelli
Commit af040ffc9ba1 ("ARM: make it easier to check the CPU part number correctly") changed ARM_CPU_PART_X masks, and the way they are returned and checked against. Usage of read_cpuid_part_number() is now deprecated, and calling places updated accordingly. This actually broke cpuidle-big_little initialization, as bl_idle_driver_init() performs a check using an hardcoded mask on cpu_id. Create an interface to perform the check (that is now even easier to read). Define also a proper mask (ARM_CPU_PART_MASK) that makes this kind of checks cleaner and helps preventing bugs in the future. Update usage accordingly. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>