aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-13Merge tag 'for-linus-20180413' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Followup fixes for this merge window. This contains: - Series from Ming, fixing corner cases in our CPU <-> queue mapping. This triggered repeated warnings on especially s390, but I also hit it in cpu hot plug/unplug testing while doing IO on NVMe on x86-64. - Another fix from Ming, ensuring that we always order budget and driver tag identically, avoiding a deadlock on QD=1 devices. - Loop locking regression fix from this merge window, from Omar. - Another loop locking fix, this time missing an unlock, from Tetsuo Handa. - Fix for racing IO submission with device removal from Bart. - sr reference fix from me, fixing a case where disk change or getevents can race with device removal. - Set of nvme fixes by way of Keith, from various contributors" * tag 'for-linus-20180413' of git://git.kernel.dk/linux-block: (28 commits) nvme: expand nvmf_check_if_ready checks nvme: Use admin command effects for admin commands nvmet: fix space padding in serial number nvme: check return value of init_srcu_struct function nvmet: Fix nvmet_execute_write_zeroes sector count nvme-pci: Separate IO and admin queue IRQ vectors nvme-pci: Remove unused queue parameter nvme-pci: Skip queue deletion if there are no queues nvme: target: fix buffer overflow nvme: don't send keep-alives to the discovery controller nvme: unexport nvme_start_keep_alive nvme-loop: fix kernel oops in case of unhandled command nvme: enforce 64bit offset for nvme_get_log_ext fn sr: get/drop reference to device in revalidate and check_events blk-mq: Revert "blk-mq: reimplement blk_mq_hw_queue_mapped" blk-mq: Avoid that submitting a bio concurrently with device removal triggers a crash backing: silence compiler warning using __printf blk-mq: remove code for dealing with remapping queue blk-mq: reimplement blk_mq_hw_queue_mapped blk-mq: don't check queue mapped in __blk_mq_delay_run_hw_queue() ...
2018-04-13Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - hot bugfix for i801 to make laptops with strange BIOS reboot again when using SMBUS Host notify - change to MAINTAINERS creating a specific fallback entry for I2C host drivers and settings its status to "Odd fixes" - a long overdue param checking for the I2C core * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: add param sanity check to i2c_transfer() MAINTAINERS: add maintainer for Renesas I2C related drivers MAINTAINERS: remove me as maintainer for I2C host drivers i2c: i801: Restore configuration at shutdown i2c: i801: Save register SMBSLVCMD value only once
2018-04-13Merge tag 'sh-for-4.17' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker: "Fixes for bugs in futex, device tree, and userspace breakpoint traps, and for PCI issues on SH7786" * tag 'sh-for-4.17' of git://git.libc.org/linux-sh: arch/sh: pcie-sh7786: handle non-zero DMA offset arch/sh: pcie-sh7786: adjust the memory mapping arch/sh: pcie-sh7786: adjust PCI MEM and IO regions arch/sh: pcie-sh7786: exclude unusable PCI MEM areas arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled arch/sh: pci: don't use disabled resources arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset arch/sh: add sh7786_mm_sel() function sh: fix debug trap failure to process signals before return to user sh: fix memory corruption of unflattened device tree sh: fix futex FUTEX_OP_SET op on userspace addresses
2018-04-13Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Will Deacon: "A few late updates to address some issues arising from conflicts with other trees: - Removal of Qualcomm-specific Spectre-v2 mitigation in favour of the generic SMCCC-based firmware call - Fix EL2 hardening capability checking, which was bodged to reduce conflicts with the KVM tree - Add some currently unused assembler macros for managing SIMD registers which will be used by some crypto code in the next merge window" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: assembler: add macros to conditionally yield the NEON under PREEMPT arm64: assembler: add utility macros to push/pop stack frames arm64: Move the content of bpi.S to hyp-entry.S arm64: Get rid of __smccc_workaround_1_hvc_* arm64: capabilities: Rework EL2 vector hardening entry arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
2018-04-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "Three notable larger changes next to the usual bug fixing: - update the email addresses in MAINTAINERS for the s390 folks to use the simpler linux.ibm.com domain instead of the old linux.vnet.ibm.com - an update for the zcrypt device driver that removes some old and obsolete interfaces and add support for up to 256 crypto adapters - a rework of the IPL aka boot code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits) s390: correct nospec auto detection init order s390/zcrypt: Support up to 256 crypto adapters. s390/zcrypt: Remove deprecated zcrypt proc interface. s390/zcrypt: Remove deprecated ioctls. s390/zcrypt: Make ap init functions static. MAINTAINERS: update s390 maintainers email addresses s390/ipl: remove reipl_method and dump_method s390/ipl: correct kdump reipl block checksum calculation s390/ipl: remove non-existing functions declaration s390: assume diag308 set always works s390/ipl: avoid adding scpdata to cmdline during ftp/dvd boot s390/ipl: correct ipl parmblock valid checks s390/ipl: rely on diag308 store to get ipl info s390/ipl: move ipl_flags to ipl.c s390/ipl: get rid of ipl_ssid and ipl_devno s390/ipl: unite diag308 and scsi boot ipl blocks s390/ipl: ensure loadparm valid flag is set s390/qdio: lock device while installing IRQ handler s390/qdio: clear intparm during shutdown s390/ccwgroup: require at least one ccw device ...
2018-04-13kconfig: extend output of 'listnewconfig'Don Zickus
We at Red Hat/Fedora have generally tried to have a per file breakdown of every config option we set. This makes it easy for us to add new options when they are exposed and keep a changelog of why they were set. A Fedora example is here: https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic Using various merge scripts, we build up a config file and run it through 'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new config options that haven't been manually set and use the default until a patch is posted to set it properly. To speed things up, it would be nice to make it easier to generate a patch to post the default setting. The output of 'make listnewconfig' has two issues that limit us: - it doesn't provide the default value - it doesn't provide the new 'choice' options that get flagged in 'oldconfig' This patch extends 'listnewconfig' to address the above two issues. This allows us to run a script make listnewconfig | rhconfig-tool -o patches; git send-email patches/ The output of 'make listnewconfig': CONFIG_NET_EMATCH_IPT CONFIG_IPVLAN CONFIG_ICE CONFIG_NET_VENDOR_NI CONFIG_IEEE802154_MCR20A CONFIG_IR_IMON_DECODER CONFIG_IR_IMON_RAW The new output of 'make listnewconfig': CONFIG_KERNEL_XZ=n CONFIG_KERNEL_LZO=n CONFIG_NET_EMATCH_IPT=n CONFIG_IPVLAN=n CONFIG_ICE=n CONFIG_NET_VENDOR_NI=y CONFIG_IEEE802154_MCR20A=n CONFIG_IR_IMON_DECODER=n CONFIG_IR_IMON_RAW=n Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-13kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkgJavier Martinez Canillas
The new-kernel-pkg script is only present when grubby is installed, but it may not always be the case. So if the script isn't present, attempt to use the kernel-install script as a fallback instead. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-13btrfs: Only check first key for committed tree blocksQu Wenruo
When looping btrfs/074 with many cpus (>= 8), it's possible to trigger kernel warning due to first key verification: [ 4239.523446] WARNING: CPU: 5 PID: 2381 at fs/btrfs/disk-io.c:460 btree_read_extent_buffer_pages+0x1ad/0x210 [ 4239.523830] Modules linked in: [ 4239.524630] RIP: 0010:btree_read_extent_buffer_pages+0x1ad/0x210 [ 4239.527101] Call Trace: [ 4239.527251] read_tree_block+0x42/0x70 [ 4239.527434] read_node_slot+0xd2/0x110 [ 4239.527632] push_leaf_right+0xad/0x1b0 [ 4239.527809] split_leaf+0x4ea/0x700 [ 4239.527988] ? leaf_space_used+0xbc/0xe0 [ 4239.528192] ? btrfs_set_lock_blocking_rw+0x99/0xb0 [ 4239.528416] btrfs_search_slot+0x8cc/0xa40 [ 4239.528605] btrfs_insert_empty_items+0x71/0xc0 [ 4239.528798] __btrfs_run_delayed_refs+0xa98/0x1680 [ 4239.529013] btrfs_run_delayed_refs+0x10b/0x1b0 [ 4239.529205] btrfs_commit_transaction+0x33/0xaf0 [ 4239.529445] ? start_transaction+0xa8/0x4f0 [ 4239.529630] btrfs_alloc_data_chunk_ondemand+0x1b0/0x4e0 [ 4239.529833] btrfs_check_data_free_space+0x54/0xa0 [ 4239.530045] btrfs_delalloc_reserve_space+0x25/0x70 [ 4239.531907] btrfs_direct_IO+0x233/0x3d0 [ 4239.532098] generic_file_direct_write+0xcb/0x170 [ 4239.532296] btrfs_file_write_iter+0x2bb/0x5f4 [ 4239.532491] aio_write+0xe2/0x180 [ 4239.532669] ? lock_acquire+0xac/0x1e0 [ 4239.532839] ? __might_fault+0x3e/0x90 [ 4239.533032] do_io_submit+0x594/0x860 [ 4239.533223] ? do_io_submit+0x594/0x860 [ 4239.533398] SyS_io_submit+0x10/0x20 [ 4239.533560] ? SyS_io_submit+0x10/0x20 [ 4239.533729] do_syscall_64+0x75/0x1d0 [ 4239.533979] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 4239.534182] RIP: 0033:0x7f8519741697 The problem here is, at btree_read_extent_buffer_pages() we don't have acquired read/write lock on that extent buffer, only basic info like level/bytenr is reliable. So race condition leads to such false alert. However in current call site, it's impossible to acquire proper lock without race window. To fix the problem, we only verify first key for committed tree blocks (whose generation is no larger than fs_info->last_trans_committed), so the content of such tree blocks will not change and there is no need to get read/write lock. Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 581c1760415c ("btrfs: Validate child tree block's level and first key") Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-13powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU featuresMichael Ellerman
The cpu_has_feature() mechanism has an optimisation where at build time we construct a mask of the CPU feature bits that will always be true for the given .config, based on the platform/bitness/etc. that we are building for. That is incompatible with DT CPU features, where the set of CPU features is dependent on feature flags that are given to us by firmware. The result is that some feature bits can not be *disabled* by DT CPU features. Or more accurately, they can be disabled but they will still appear in the ALWAYS mask, meaning cpu_has_feature() will always return true for them. In the past this hasn't really been a problem because on Book3S 64 (where we support DT CPU features), the set of ALWAYS bits has been very small. That was because we always built for POWER4 and later, meaning the set of common bits was small. The only bit that could be cleared by DT CPU features that was also in the ALWAYS mask was CPU_FTR_NODSISRALIGN, and that was only used in the alignment handler to create a fake DSISR. That code was itself deleted in 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") (Sep 2017). However the set of ALWAYS features changed with the recent commit db5ae1c155af ("powerpc/64s: Refine feature sets for little endian builds") which restricted the set of feature flags when building little endian to Power7 or later. That caused the ALWAYS mask to become much larger for little endian builds. The result is that the following feature bits can currently not be *disabled* by DT CPU features: CPU_FTR_REAL_LE, CPU_FTR_MMCRA, CPU_FTR_CTRL, CPU_FTR_SMT, CPU_FTR_PURR, CPU_FTR_SPURR, CPU_FTR_DSCR, CPU_FTR_PKEY, CPU_FTR_VMX_COPY, CPU_FTR_CFAR, CPU_FTR_HAS_PPR. To fix it we need to mask the set of ALWAYS features with the base set of DT CPU features, ie. the features that are always enabled by DT CPU features. That way there are no bits in the ALWAYS mask that are not also always set by DT CPU features. Fixes: db5ae1c155af ("powerpc/64s: Refine feature sets for little endian builds") Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-13firmware: dmi_scan: Use lowercase letters for UUIDJean Delvare
RFC 4122 asks for letters a-f in UUID to be lowercase. Follow this recommendation. Suggested by Paul Dagnelie at: https://savannah.nongnu.org/bugs/index.php?53569 Signed-off-by: Jean Delvare <jdelvare@suse.de>
2018-04-13firmware: dmi_scan: Add DMI_OEM_STRING support to dmi_matchesAlex Hung
OEM strings are defined by each OEM and they contain customized and useful OEM information. Supporting it provides more flexible uses of the dmi_matches function. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2018-04-13firmware: dmi_scan: Fix UUID length safety checkJean Delvare
The test which ensures that the DMI type 1 structure is long enough to hold the UUID is off by one. It would fail if the structure is exactly 24 bytes long, while that's sufficient to hold the UUID. I don't expect this bug to cause problem in practice because all implementations I have seen had length 8, 25 or 27 bytes, in line with the SMBIOS specifications. But let's fix it still. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: a814c3597a6b ("firmware: dmi_scan: Check DMI structure length") Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-04-13Merge branches 'thermal-core' and 'thermal-soc' into nextZhang Rui
2018-04-12Merge tag 'drm-fixes-for-v4.17-rc1' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "One omap, and one alsa pm fix (we merged the breaking patch via drm tree). Otherwise it's two bunches of amdgpu fixes, removing an unneeded file, some DC fixes, HDMI audio regression fix, and some vega12 fixes" * tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux: (27 commits) Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)" Revert "drm/amd/display: fix dereferencing possible ERR_PTR()" drm/amd/display: Fix regamma not affecting full-intensity color values drm/amd/display: Fix FBC text console corruption drm/amd/display: Only register backlight device if embedded panel connected drm/amd/display: fix brightness level after resume from suspend drm/amd/display: HDMI has no sound after Panel power off/on drm/amdgpu: add MP1 and THM hw ip base reg offset drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset drm/radeon: add PX quirk for Asus K73TK drm/omap: fix crash if there's no video PLL drm/amdgpu: Fix memory leaks at amdgpu_init() error path drm/amdgpu: Fix PCIe lane width calculation drm/radeon: Fix PCIe lane width calculation drm/amdgpu/si: implement get/set pcie_lanes asic callback drm/amdgpu: Add support for SRBM selection v3 Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5" drm/amd/powerply: fix power reading on Fiji drm/amd/powerplay: Enable ACG SS feature drm/amdgpu/sdma: fix mask in emit_pipeline_sync ...
2018-04-12Merge tag 'trace-v4.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few clean ups and bug fixes: - replace open coded "ARRAY_SIZE()" with macro - updates to uprobes - bug fix for perf event filter on error path" * tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Enforce passing in filter=NULL to create_filter() trace_uprobe: Simplify probes_seq_show() trace_uprobe: Use %lx to display offset tracing/uprobe: Add support for overlayfs tracing: Use ARRAY_SIZE() macro instead of open coding it
2018-04-12proc: fixup copyright signAlexey Dobriyan
Add copyright in two files before they get autorubberstamped. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-12Merge tag 'pci-v4.17-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - mark Extended Tags as broken on Broadcom HT1100 and HT2000 Root Ports to fix drm/Xorg hangs and unresponsive keyboards (Sinan Kaya) - remove useless messages during resource reassignment (Desnes A. Nunes do Rosario) * tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove messages about reassigning resources PCI: Mark Broadcom HT1100 and HT2000 Root Port Extended Tags as broken
2018-04-12cifs: change validate_buf to validate_iovRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data()Ronnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12cifs: Change SMB2_open to return an iov for the error parameterRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12cifs: add resp_buf_size to the mid_q_entry structureRonnie Sahlberg
and get rid of some more calls to get_rfc1002_length() Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12smb3.11: replace a 4 with server->vals->header_preamble_sizeSteve French
More cleanup of use of hardcoded 4 byte RFC1001 field size Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-04-12Merge branch 'parisc-4.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - fix panic when halting system via "shutdown -h now" - drop own coding in favour of generic CONFIG_COMPAT_BINFMT_ELF implementation - add FPE_CONDTRAP constant: last outstanding parisc-specific cleanup for Eric Biedermans siginfo patches - move some functions to .init and some to .text.hot linker sections * 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent panic at system halt parisc: Switch to generic COMPAT_BINFMT_ELF parisc: Move cache flush functions into .text.hot section parisc/signal: Add FPE_CONDTRAP for conditional trap handling
2018-04-12arch/sh: pcie-sh7786: handle non-zero DMA offsetThomas Petazzoni
On SuperH, the base of the physical memory might be different from zero. In this case, PCI address zero will map to a non-zero physical address. In order to make sure that the DMA mapping API takes care of this DMA offset, we must fill in the dev->dma_pfn_offset field for PCI devices. This gets done in the pcibios_bus_add_device() hook, called for each new PCI device detected. The dma_pfn_offset global variable is re-calculated for every PCI controller available on the platform, but that's not an issue because its value will each time be exactly the same, as it only depends on the memory start address and memory size. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: adjust the memory mappingThomas Petazzoni
The code setting up the PCI -> SuperHighway mapping doesn't take into account the fact that the address stored in PCIELARx must be aligned with the size stored in PCIELAMRx. For example, when your physical memory starts at 0x0800_0000 (128 MB), a size of 64 MB or 128 MB is fine. However, if you have 256 MB of memory, it doesn't work because the base address is not aligned on the size. In such situation, we have to round down the base address to make sure it is aligned on the size of the area. For for a 0x0800_0000 base address with 256 MB of memory, we will round down to 0x0, and extend the size of the mapping to 512 MB. This allows the mapping to work on platforms that have 256 MB of RAM. The current setup would only work with 128 MB of RAM or less. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: adjust PCI MEM and IO regionsThomas Petazzoni
The current definition of the PCIe IO and MEM resources for SH7786 doesn't match what the datasheet says. For example, for PCIe0 0xfe100000 is advertised by the datasheet as a PCI IO region, while 0xfd000000 is advertised as a PCI MEM region. The code currently inverts the two. The SH4A_PCIEPARL and SH4A_PCIEPTCTLR registers allow to define the base address and role of the different regions (including whether it's a MEM or IO region). However, practical experience on a SH7786 shows that if 0xfe100000 is used for LEL and 0xfd000000 for IO, a PCIe device using two MEM BARs cannot be accessed at all. Simply using 0xfe100000 for IO and 0xfd000000 for MEM makes the PCIe device accessible. It is very likely that this was never seen because there are two other PCI MEM region listed in the resources. However, for different reasons, none of the two other MEM regions are usable on the specific SH7786 platform the problem was encountered. Therefore, the last MEM region at 0xfe100000 was used to place the BARs, making the device non-functional. This commit therefore adjusts those PCI MEM and IO resources definitions so that they match what the datasheet says. They have only been tested with PCIe 0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: exclude unusable PCI MEM areasThomas Petazzoni
Depending on the physical memory layout, some PCI MEM areas are not usable. According to the SH7786 datasheet, the PCI MEM area from 1000_0000 to 13FF_FFFF is only usable if the physical memory layout (in MMSELR) is 1, 2, 5 or 6. In all other configurations, this PCI MEM area is not usable (because it overlaps with DRAM). Therefore, this commit adjusts the PCI SH7786 initialization to mark the relevant PCI resource as IORESOURCE_DISABLED if we can't use it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: mark unavailable PCI resource as disabledThomas Petazzoni
Some PCI MEM resources are marked as IORESOURCE_MEM_32BIT, which means they are only usable when the SH core runs in 32-bit mode. In 29-bit mode, such memory regions are not usable. The existing code for SH7786 properly skips such regions when configuring the PCIe controller registers. However, because such regions are still described in the resource array, the pcibios_scanbus() function in the SuperH pci.c will register them to the PCI core. Due to this, the PCI core will allocate MEM areas from this resource, and assign BARs pointing to this area, even though it's unusable. In order to prevent this from happening, we mark such regions as IORESOURCE_DISABLED, which tells the SuperH pci.c pcibios_scanbus() function to skip them. Note that we separate marking the region as disabled from skipping it, because other regions will be marked as disabled in follow-up patches. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pci: don't use disabled resourcesThomas Petazzoni
In pcibios_scanbus(), we provide to the PCI core the usable MEM and IO regions using pci_add_resource_offset(). We travel through all resources available in the "struct pci_channel". Also, in register_pci_controller(), we travel through all resources to request them, making sure they don't conflict with already requested resources. However, some resources may be disabled, in which case they should not be requested nor provided to the PCI core. In the current situation, none of the resources are disabled. However, follow-up patches in this series will make some resources disabled, making this preliminary change necessary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: make the DMA mapping operations observe dev->dma_pfn_offsetThomas Petazzoni
Some devices may have a non-zero DMA offset, i.e an offset between the DMA address and the physical address. Such an offset can be encoded into the dma_pfn_offset field of "struct device", but the SuperH implementation of the DMA mapping API does not observe this information. This commit fixes that by ensuring the DMA address is properly calculated depending on this DMA offset. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: add sh7786_mm_sel() functionThomas Petazzoni
The SH7786 has different physical memory layout configurations, configurable through the MMSELR register. The configuration is typically defined by the bootloader, so Linux generally doesn't care. Except that depending on the configuration, some PCI MEM areas may or may not be available. This commit adds a helper function that allows to retrieve the current physical memory layout configuration. It will be used in a following patch to exclude unusable PCI MEM areas during the PCI initialization. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: fix debug trap failure to process signals before return to userRich Felker
When responding to a debug trap (breakpoint) in userspace, the kernel's trap handler raised SIGTRAP but returned from the trap via a code path that ignored pending signals, resulting in an infinite loop re-executing the trapping instruction. Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: fix memory corruption of unflattened device treeRich Felker
unflatten_device_tree() makes use of memblock allocation, and therefore must be called before paging_init() migrates the memblock allocation data to the bootmem framework. Otherwise the record of the allocation for the expanded device tree will be lost, and will eventually be clobbered when allocated for another use. Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12sh: fix futex FUTEX_OP_SET op on userspace addressesAurelien Jarno
Commit 00b73d8d1b71 ("sh: add working futex atomic ops on userspace addresses for smp") changed the futex_atomic_op_inuser function to use a loop. In case of the FUTEX_OP_SET op with a userspace address containing a value different of 0, this loop is an endless loop. Fix that by loading the value of oldval from the userspace before doing the cmpxchg op, also for the FUTEX_OP_SET case. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-13Merge branch 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next - Add a PX quirk for radeon - Fix flickering and stability issues with DC on some platforms - Fix HDMI audio regression - Few other misc DC and base driver fixes * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)" Revert "drm/amd/display: fix dereferencing possible ERR_PTR()" drm/amd/display: Fix regamma not affecting full-intensity color values drm/amd/display: Fix FBC text console corruption drm/amd/display: Only register backlight device if embedded panel connected drm/amd/display: fix brightness level after resume from suspend drm/amd/display: HDMI has no sound after Panel power off/on drm/amdgpu: add MP1 and THM hw ip base reg offset drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset drm/radeon: add PX quirk for Asus K73TK
2018-04-13Merge tag 'drm-misc-next-fixes-2018-04-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next omap: Fix crash on AM4 EVM, and all OMAP2/3 boards (Tomi) Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc: drm/omap: fix crash if there's no video PLL
2018-04-12cifs: replace a 4 with server->vals->header_preamble_sizeRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12cifs: add pdu_size to the TCP_Server_Info structureRonnie Sahlberg
and get rid of some get_rfc1002_length() in smb2 Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12SMB311: Improve checking of negotiate security contextsSteve French
SMB3.11 crypto and hash contexts were not being checked strictly enough. Add parsing and validity checking for the security contexts in the SMB3.11 negotiate response. Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12SMB3: Fix length checking of SMB3.11 negotiate requestSteve French
The length checking for SMB3.11 negotiate request includes "negotiate contexts" which caused a buffer validation problem and a confusing warning message on SMB3.11 mount e.g.: SMB2 server sent bad RFC1001 len 236 not 170 Fix the length checking for SMB3.11 negotiate to account for the new negotiate context so that we don't log a warning on SMB3.11 mount by default but do log warnings if lengths returned by the server are incorrect. CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-12Merge tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull more xfs updates from Darrick Wong: "Most of these are code cleanups, but there are a couple of notable use-after-free bug fixes. This series has been run through a full xfstests run over the week and through a quick xfstests run against this morning's master, with no major failures reported. - clean up unnecessary function call parameters - fix a use-after-free bug when aborting logging intents - refactor filestreams state data to avoid use-after-free bug - fix incorrect removal of cow extents when truncating extended attributes. - refactor open-coded __set_page_dirty in favor of using vfs function. - fix a deadlock when fstrim and fs shutdown race" * tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: Force log to disk before reading the AGF during a fstrim Export __set_page_dirty xfs: only cancel cow blocks when truncating the data fork xfs: non-scrub - remove unused function parameters xfs: remove filestream item xfs_inode reference xfs: fix intent use-after-free on abort xfs: Remove "committed" argument of xfs_dir_ialloc
2018-04-12Merge tag 'gfs2-4.17.fixes2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull more gfs2 updates from Bob Peterson: "We decided to request the latest three patches to be merged into this merge window while it's still open. - The first patch adds a new function to lockref: lockref_put_not_zero - The second patch fixes GFS2's glock dump code so it uses the new lockref function. This fixes a problem whereby lock dumps could miss glocks. - I made a minor patch to update some comments and fix the lock ordering text in our gfs2-glocks.txt Documentation file" * tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Minor improvements to comments and documentation gfs2: Stop using rhashtable_walk_peek lockref: Add lockref_put_not_zero
2018-04-12Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Fix corner cases when handling device removal # v4.12+ - xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+ Features: - New sunrpc tracepoint for RPC pings - Finer grained NFSv4 attribute checking - Don't unnecessarily return NFS v4 delegations Other bugfixes and cleanups: - Several other small NFSoRDMA cleanups - Improvements to the sunrpc RTT measurements - A few sunrpc tracepoint cleanups - Various fixes for NFS v4 lock notifications - Various sunrpc and NFS v4 XDR encoding cleanups - Switch to the ida_simple API - Fix NFSv4.1 exclusive create - Forget acl cache after setattr operation - Don't advance the nfs_entry readdir cookie if xdr decoding fails" * tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits) NFS: advance nfs_entry cookie only after decoding completes successfully NFSv3/acl: forget acl cache after setattr NFSv4.1: Fix exclusive create NFSv4: Declare the size up to date after it was set. nfs: Use ida_simple API NFSv4: Fix the nfs_inode_set_delegation() arguments NFSv4: Clean up CB_GETATTR encoding NFSv4: Don't ask for attributes when ACCESS is protected by a delegation NFSv4: Add a helper to encode/decode struct timespec NFSv4: Clean up encode_attrs NFSv4; Clean up XDR encoding of type bitmap4 NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group SUNRPC: Add a helper for encoding opaque data inline SUNRPC: Add helpers for decoding opaque and string types NFSv4: Ignore change attribute invalidations if we hold a delegation NFS: More fine grained attribute tracking NFS: Don't force unnecessary cache invalidation in nfs_update_inode() NFS: Don't redirty the attribute cache in nfs_wcc_update_inode() NFS: Don't force a revalidation of all attributes if change is missing NFS: Convert NFS_INO_INVALID flags to unsigned long ...
2018-04-12Merge branch 'work.thaw' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs thaw updates from Al Viro: "An ancient series that has fallen through the cracks in the previous cycle" * 'work.thaw' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: buffer.c: call thaw_super during emergency thaw vfs: factor sb iteration out of do_emergency_remount
2018-04-12Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"Harry Wentland
This seems to cause flickering and lock-ups for a wide range of users. Revert until we've found a proper fix for the flickering and lock-ups. This reverts commit 36cc549d59864b7161f0e23d710c1c4d1b9cf022. Cc: Shirish S <shirish.s@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-12Merge branch 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull AFS updates from Al Viro: "The AFS series posted by dhowells depended upon lookup_one_len() rework; now that prereq is in the mainline, that series had been rebased on top of it and got some exposure and testing..." * 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Do better accretion of small writes on newly created content afs: Add stats for data transfer operations afs: Trace protocol errors afs: Locally edit directory data for mkdir/create/unlink/... afs: Adjust the directory XDR structures afs: Split the directory content defs into a header afs: Fix directory handling afs: Split the dynroot stuff out and give it its own ops tables afs: Keep track of invalid-before version for dentry coherency afs: Rearrange status mapping afs: Make it possible to get the data version in readpage afs: Init inode before accessing cache afs: Introduce a statistics proc file afs: Dump bad status record afs: Implement @cell substitution handling afs: Implement @sys substitution handling afs: Prospectively look up extra files when doing a single lookup afs: Don't over-increment the cell usage count when pinning it afs: Fix checker warnings vfs: Remove the const from dir_context::actor
2018-04-12Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"Harry Wentland
This reverts commit cd2d6c92a8e39d7e50a5af9fcc67d07e6a89e91d. Cc: Shirish S <shirish.s@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-12drm/amd/display: Fix regamma not affecting full-intensity color valuesLeo (Sunpeng) Li
Hardware understands the regamma LUT as a piecewise linear function, with points spaced exponentially along the range. We previously programmed the LUT for range [2^-10, 2^0). This causes (normalized) color values of 1 (=2^0) to miss the programmed LUT, and fall onto the end region. For DCE, the end region is extrapolated using a single (base, slope) pair, using the max y-value from the last point in the curve as base. This presents a problem, since this value affects all three color channels. Scaling down the intensity of say - the blue regamma curve - will not affect it's end region. This is especially noticiable when using RedShift. It scales down the blue and green channels, but leaves full-intensity colors unshifted. Therefore, extend the range to cover [2^-10, 2^1) by programming another hardware segment, containing only one point. That way, we won't be hitting the end region. Note that things are a bit different for DCN, since the end region can be set per-channel. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-12drm/amd/display: Fix FBC text console corruptionRoman Li
Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-12drm/amd/display: Only register backlight device if embedded panel connectedHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>