aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/mesh_sync.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes.berg@intel.com>2012-06-22 11:29:50 +0200
committerJohannes Berg <johannes.berg@intel.com>2012-06-24 11:32:29 +0200
commitbdcbd8e0e3ffdad32b14b6373e67bfcf5fd3f002 (patch)
treeb636f2229570dc95edef997272bd0656cf19224d /net/mac80211/mesh_sync.c
parentd3b2fb53c7f82903880769d406c11c7e619b11a4 (diff)
downloadlinux-stericsson-bdcbd8e0e3ffdad32b14b6373e67bfcf5fd3f002.tar.gz
mac80211: clean up debugging
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'net/mac80211/mesh_sync.c')
-rw-r--r--net/mac80211/mesh_sync.c47
1 files changed, 20 insertions, 27 deletions
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 0ccdad49f987..accfa00ffcdf 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -12,13 +12,6 @@
#include "mesh.h"
#include "driver-ops.h"
-#ifdef CONFIG_MAC80211_VERBOSE_MESH_SYNC_DEBUG
-#define msync_dbg(fmt, args...) \
- pr_debug("Mesh sync (%s): " fmt "\n", sdata->name, ##args)
-#else
-#define msync_dbg(fmt, args...) do { (void)(0); } while (0)
-#endif
-
/* This is not in the standard. It represents a tolerable tbtt drift below
* which we do no TSF adjustment.
*/
@@ -65,14 +58,14 @@ void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
spin_lock_bh(&ifmsh->sync_offset_lock);
if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
- msync_dbg("TBTT : max clockdrift=%lld; adjusting",
- (long long) ifmsh->sync_offset_clockdrift_max);
+ msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting\n",
+ (long long) ifmsh->sync_offset_clockdrift_max);
tsfdelta = -ifmsh->sync_offset_clockdrift_max;
ifmsh->sync_offset_clockdrift_max = 0;
} else {
- msync_dbg("TBTT : max clockdrift=%lld; adjusting by %llu",
- (long long) ifmsh->sync_offset_clockdrift_max,
- (unsigned long long) beacon_int_fraction);
+ msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting by %llu\n",
+ (long long) ifmsh->sync_offset_clockdrift_max,
+ (unsigned long long) beacon_int_fraction);
tsfdelta = -beacon_int_fraction;
ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
}
@@ -120,7 +113,7 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
- msync_dbg("STA %pM : is adjusting TBTT", sta->sta.addr);
+ msync_dbg(sdata, "STA %pM : is adjusting TBTT\n", sta->sta.addr);
goto no_sync;
}
@@ -169,7 +162,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
s64 t_clockdrift = sta->t_offset_setpoint
- sta->t_offset;
- msync_dbg("STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld",
+ msync_dbg(sdata,
+ "STA %pM : sta->t_offset=%lld, sta->t_offset_setpoint=%lld, t_clockdrift=%lld\n",
sta->sta.addr,
(long long) sta->t_offset,
(long long)
@@ -178,7 +172,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT ||
t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
- msync_dbg("STA %pM : t_clockdrift=%lld too large, setpoint reset",
+ msync_dbg(sdata,
+ "STA %pM : t_clockdrift=%lld too large, setpoint reset\n",
sta->sta.addr,
(long long) t_clockdrift);
clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
@@ -197,8 +192,8 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
} else {
sta->t_offset_setpoint = sta->t_offset - TOFFSET_SET_MARGIN;
set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
- msync_dbg("STA %pM : offset was invalid, "
- " sta->t_offset=%lld",
+ msync_dbg(sdata,
+ "STA %pM : offset was invalid, sta->t_offset=%lld\n",
sta->sta.addr,
(long long) sta->t_offset);
rcu_read_unlock();
@@ -226,17 +221,15 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
* to the driver tsf setter, we punt
* the tsf adjustment to the mesh tasklet
*/
- msync_dbg("TBTT : kicking off TBTT "
- "adjustment with "
- "clockdrift_max=%lld",
- ifmsh->sync_offset_clockdrift_max);
+ msync_dbg(sdata,
+ "TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
+ ifmsh->sync_offset_clockdrift_max);
set_bit(MESH_WORK_DRIFT_ADJUST,
&ifmsh->wrkq_flags);
} else {
- msync_dbg("TBTT : max clockdrift=%lld; "
- "too small to adjust",
- (long long)
- ifmsh->sync_offset_clockdrift_max);
+ msync_dbg(sdata,
+ "TBTT : max clockdrift=%lld; too small to adjust\n",
+ (long long)ifmsh->sync_offset_clockdrift_max);
ifmsh->sync_offset_clockdrift_max = 0;
}
spin_unlock_bh(&ifmsh->sync_offset_lock);
@@ -268,7 +261,7 @@ static void mesh_sync_vendor_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
const u8 *oui;
WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR);
- msync_dbg("called mesh_sync_vendor_rx_bcn_presp");
+ msync_dbg(sdata, "called mesh_sync_vendor_rx_bcn_presp\n");
oui = mesh_get_vendor_oui(sdata);
/* here you would implement the vendor offset tracking for this oui */
}
@@ -278,7 +271,7 @@ static void mesh_sync_vendor_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
const u8 *oui;
WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR);
- msync_dbg("called mesh_sync_vendor_adjust_tbtt");
+ msync_dbg(sdata, "called mesh_sync_vendor_adjust_tbtt\n");
oui = mesh_get_vendor_oui(sdata);
/* here you would implement the vendor tsf adjustment for this oui */
}