aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-stmfx.c
diff options
context:
space:
mode:
authorAlexandre Torgue <alexandre.torgue@st.com>2019-07-25 13:16:56 +0200
committerLinus Walleij <linus.walleij@linaro.org>2019-08-05 12:14:30 +0200
commita502b343ebd0eab38f3cb33fbb84011847cf5aac (patch)
tree401f743fd4e1fcb2da51b0cbf64b83787e9afa7e /drivers/pinctrl/pinctrl-stmfx.c
parent2f22e2028c03d95c47b077887297dfa068da2c8a (diff)
downloadlinux-stericsson-a502b343ebd0eab38f3cb33fbb84011847cf5aac.tar.gz
pinctrl: stmfx: update pinconf settings
According to the following tab (coming from STMFX datasheet), updates have to done in stmfx_pinconf_set function: -"type" has to be set when "bias" is configured as "pull-up or pull-down" -PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as output. There is so no need to check direction. DIR | TYPE | PUPD | MFX GPIO configuration ----|------|------|--------------------------------------------------- 1 | 1 | 1 | OUTPUT open drain with internal pull-up resistor ----|------|------|--------------------------------------------------- 1 | 1 | 0 | OUTPUT open drain with internal pull-down resistor ----|------|------|--------------------------------------------------- 1 | 0 | 0/1 | OUTPUT push pull no pull ----|------|------|--------------------------------------------------- 0 | 1 | 1 | INPUT with internal pull-up resistor ----|------|------|--------------------------------------------------- 0 | 1 | 0 | INPUT with internal pull-down resistor ----|------|------|--------------------------------------------------- 0 | 0 | 1 | INPUT floating ----|------|------|--------------------------------------------------- 0 | 0 | 0 | analog (GPIO not used, default setting) Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/1564053416-32192-1-git-send-email-amelie.delaunay@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-stmfx.c')
-rw-r--r--drivers/pinctrl/pinctrl-stmfx.c24
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index d3332da35637..31b6e511670f 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -296,29 +296,29 @@ static int stmfx_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
switch (param) {
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ ret = stmfx_pinconf_set_type(pctl, pin, 0);
+ if (ret)
+ return ret;
+ break;
case PIN_CONFIG_BIAS_PULL_DOWN:
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
+ if (ret)
+ return ret;
ret = stmfx_pinconf_set_pupd(pctl, pin, 0);
if (ret)
return ret;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- ret = stmfx_pinconf_set_pupd(pctl, pin, 1);
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
if (ret)
return ret;
- break;
- case PIN_CONFIG_DRIVE_OPEN_DRAIN:
- if (!dir)
- ret = stmfx_pinconf_set_type(pctl, pin, 1);
- else
- ret = stmfx_pinconf_set_type(pctl, pin, 0);
+ ret = stmfx_pinconf_set_pupd(pctl, pin, 1);
if (ret)
return ret;
break;
- case PIN_CONFIG_DRIVE_PUSH_PULL:
- if (!dir)
- ret = stmfx_pinconf_set_type(pctl, pin, 0);
- else
- ret = stmfx_pinconf_set_type(pctl, pin, 1);
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
if (ret)
return ret;
break;