aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-10-22 10:23:15 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-10-22 10:23:15 -0700
commit0c2b6dc4fd4fa13796b319aae969a009f03222c6 (patch)
tree82800291c44976174d561ce95914a214dc8b10b9
parent3e9679a365d3b92ae770066cd0e3a2c01fcc64e2 (diff)
parent593876838826914a7e4e05fbbcb728be6fbc4d89 (diff)
downloadlinux-stericsson-0c2b6dc4fd4fa13796b319aae969a009f03222c6.tar.gz
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: "This updates contains: - A revert which addresses a boot failure on ARM Sun5i platforms - A new clocksource driver, which has been delayed beyond rc1 due to an interrupt driver issue which was unearthed by this driver. The debugging of that issue and the discussion about the proper solution made this driver miss the merge window. There is no point in delaying it for a full cycle as it completes the basic mainline support for the new JCore platform and does not create any risk outside of that platform" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init" clocksource: Add J-Core timer/clocksource driver of: Add J-Core timer bindings
-rw-r--r--Documentation/devicetree/bindings/timer/jcore,pit.txt24
-rw-r--r--drivers/clocksource/Kconfig10
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/jcore-pit.c249
-rw-r--r--drivers/clocksource/timer-sun5i.c16
-rw-r--r--include/linux/cpuhotplug.h1
6 files changed, 299 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/timer/jcore,pit.txt b/Documentation/devicetree/bindings/timer/jcore,pit.txt
new file mode 100644
index 000000000000..af5dd35469d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/jcore,pit.txt
@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+ there should be one region per cpu, indexed by the sequential,
+ zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+ core is integrated with the aic and allows the timer interrupt
+ assignment to be programmed by software, but this property is
+ required in order to reserve an interrupt number that doesn't
+ conflict with other devices.
+
+
+Example:
+
+timer@200 {
+ compatible = "jcore,pit";
+ reg = < 0x200 0x30 0x500 0x30 >;
+ interrupts = < 0x48 >;
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 245190839359..e2c6e43cf8ca 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -417,6 +417,16 @@ config SYS_SUPPORTS_SH_TMU
config SYS_SUPPORTS_EM_STI
bool
+config CLKSRC_JCORE_PIT
+ bool "J-Core PIT timer driver" if COMPILE_TEST
+ depends on OF
+ depends on GENERIC_CLOCKEVENTS
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ This enables build of clocksource and clockevent driver for
+ the integrated PIT in the J-Core synthesizable, open source SoC.
+
config SH_TIMER_CMT
bool "Renesas CMT timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index fd9d6df0bbc0..cf87f407f1ad 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
+obj-$(CONFIG_CLKSRC_JCORE_PIT) += jcore-pit.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
diff --git a/drivers/clocksource/jcore-pit.c b/drivers/clocksource/jcore-pit.c
new file mode 100644
index 000000000000..54e1665aa03c
--- /dev/null
+++ b/drivers/clocksource/jcore-pit.c
@@ -0,0 +1,249 @@
+/*
+ * J-Core SoC PIT/clocksource driver
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/cpu.h>
+#include <linux/cpuhotplug.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define PIT_IRQ_SHIFT 12
+#define PIT_PRIO_SHIFT 20
+#define PIT_ENABLE_SHIFT 26
+#define PIT_PRIO_MASK 0xf
+
+#define REG_PITEN 0x00
+#define REG_THROT 0x10
+#define REG_COUNT 0x14
+#define REG_BUSPD 0x18
+#define REG_SECHI 0x20
+#define REG_SECLO 0x24
+#define REG_NSEC 0x28
+
+struct jcore_pit {
+ struct clock_event_device ced;
+ void __iomem *base;
+ unsigned long periodic_delta;
+ u32 enable_val;
+};
+
+static void __iomem *jcore_pit_base;
+static struct jcore_pit __percpu *jcore_pit_percpu;
+
+static notrace u64 jcore_sched_clock_read(void)
+{
+ u32 seclo, nsec, seclo0;
+ __iomem void *base = jcore_pit_base;
+
+ seclo = readl(base + REG_SECLO);
+ do {
+ seclo0 = seclo;
+ nsec = readl(base + REG_NSEC);
+ seclo = readl(base + REG_SECLO);
+ } while (seclo0 != seclo);
+
+ return seclo * NSEC_PER_SEC + nsec;
+}
+
+static cycle_t jcore_clocksource_read(struct clocksource *cs)
+{
+ return jcore_sched_clock_read();
+}
+
+static int jcore_pit_disable(struct jcore_pit *pit)
+{
+ writel(0, pit->base + REG_PITEN);
+ return 0;
+}
+
+static int jcore_pit_set(unsigned long delta, struct jcore_pit *pit)
+{
+ jcore_pit_disable(pit);
+ writel(delta, pit->base + REG_THROT);
+ writel(pit->enable_val, pit->base + REG_PITEN);
+ return 0;
+}
+
+static int jcore_pit_set_state_shutdown(struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_disable(pit);
+}
+
+static int jcore_pit_set_state_oneshot(struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_disable(pit);
+}
+
+static int jcore_pit_set_state_periodic(struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_set(pit->periodic_delta, pit);
+}
+
+static int jcore_pit_set_next_event(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct jcore_pit *pit = container_of(ced, struct jcore_pit, ced);
+
+ return jcore_pit_set(delta, pit);
+}
+
+static int jcore_pit_local_init(unsigned cpu)
+{
+ struct jcore_pit *pit = this_cpu_ptr(jcore_pit_percpu);
+ unsigned buspd, freq;
+
+ pr_info("Local J-Core PIT init on cpu %u\n", cpu);
+
+ buspd = readl(pit->base + REG_BUSPD);
+ freq = DIV_ROUND_CLOSEST(NSEC_PER_SEC, buspd);
+ pit->periodic_delta = DIV_ROUND_CLOSEST(NSEC_PER_SEC, HZ * buspd);
+
+ clockevents_config_and_register(&pit->ced, freq, 1, ULONG_MAX);
+
+ return 0;
+}
+
+static irqreturn_t jcore_timer_interrupt(int irq, void *dev_id)
+{
+ struct jcore_pit *pit = this_cpu_ptr(dev_id);
+
+ if (clockevent_state_oneshot(&pit->ced))
+ jcore_pit_disable(pit);
+
+ pit->ced.event_handler(&pit->ced);
+
+ return IRQ_HANDLED;
+}
+
+static int __init jcore_pit_init(struct device_node *node)
+{
+ int err;
+ unsigned pit_irq, cpu;
+ unsigned long hwirq;
+ u32 irqprio, enable_val;
+
+ jcore_pit_base = of_iomap(node, 0);
+ if (!jcore_pit_base) {
+ pr_err("Error: Cannot map base address for J-Core PIT\n");
+ return -ENXIO;
+ }
+
+ pit_irq = irq_of_parse_and_map(node, 0);
+ if (!pit_irq) {
+ pr_err("Error: J-Core PIT has no IRQ\n");
+ return -ENXIO;
+ }
+
+ pr_info("Initializing J-Core PIT at %p IRQ %d\n",
+ jcore_pit_base, pit_irq);
+
+ err = clocksource_mmio_init(jcore_pit_base, "jcore_pit_cs",
+ NSEC_PER_SEC, 400, 32,
+ jcore_clocksource_read);
+ if (err) {
+ pr_err("Error registering clocksource device: %d\n", err);
+ return err;
+ }
+
+ sched_clock_register(jcore_sched_clock_read, 32, NSEC_PER_SEC);
+
+ jcore_pit_percpu = alloc_percpu(struct jcore_pit);
+ if (!jcore_pit_percpu) {
+ pr_err("Failed to allocate memory for clock event device\n");
+ return -ENOMEM;
+ }
+
+ err = request_irq(pit_irq, jcore_timer_interrupt,
+ IRQF_TIMER | IRQF_PERCPU,
+ "jcore_pit", jcore_pit_percpu);
+ if (err) {
+ pr_err("pit irq request failed: %d\n", err);
+ free_percpu(jcore_pit_percpu);
+ return err;
+ }
+
+ /*
+ * The J-Core PIT is not hard-wired to a particular IRQ, but
+ * integrated with the interrupt controller such that the IRQ it
+ * generates is programmable, as follows:
+ *
+ * The bit layout of the PIT enable register is:
+ *
+ * .....e..ppppiiiiiiii............
+ *
+ * where the .'s indicate unrelated/unused bits, e is enable,
+ * p is priority, and i is hard irq number.
+ *
+ * For the PIT included in AIC1 (obsolete but still in use),
+ * any hard irq (trap number) can be programmed via the 8
+ * iiiiiiii bits, and a priority (0-15) is programmable
+ * separately in the pppp bits.
+ *
+ * For the PIT included in AIC2 (current), the programming
+ * interface is equivalent modulo interrupt mapping. This is
+ * why a different compatible tag was not used. However only
+ * traps 64-127 (the ones actually intended to be used for
+ * interrupts, rather than syscalls/exceptions/etc.) can be
+ * programmed (the high 2 bits of i are ignored) and the
+ * priority pppp is <<2'd and or'd onto the irq number. This
+ * choice seems to have been made on the hardware engineering
+ * side under an assumption that preserving old AIC1 priority
+ * mappings was important. Future models will likely ignore
+ * the pppp field.
+ */
+ hwirq = irq_get_irq_data(pit_irq)->hwirq;
+ irqprio = (hwirq >> 2) & PIT_PRIO_MASK;
+ enable_val = (1U << PIT_ENABLE_SHIFT)
+ | (hwirq << PIT_IRQ_SHIFT)
+ | (irqprio << PIT_PRIO_SHIFT);
+
+ for_each_present_cpu(cpu) {
+ struct jcore_pit *pit = per_cpu_ptr(jcore_pit_percpu, cpu);
+
+ pit->base = of_iomap(node, cpu);
+ if (!pit->base) {
+ pr_err("Unable to map PIT for cpu %u\n", cpu);
+ continue;
+ }
+
+ pit->ced.name = "jcore_pit";
+ pit->ced.features = CLOCK_EVT_FEAT_PERIODIC
+ | CLOCK_EVT_FEAT_ONESHOT
+ | CLOCK_EVT_FEAT_PERCPU;
+ pit->ced.cpumask = cpumask_of(cpu);
+ pit->ced.rating = 400;
+ pit->ced.irq = pit_irq;
+ pit->ced.set_state_shutdown = jcore_pit_set_state_shutdown;
+ pit->ced.set_state_periodic = jcore_pit_set_state_periodic;
+ pit->ced.set_state_oneshot = jcore_pit_set_state_oneshot;
+ pit->ced.set_next_event = jcore_pit_set_next_event;
+
+ pit->enable_val = enable_val;
+ }
+
+ cpuhp_setup_state(CPUHP_AP_JCORE_TIMER_STARTING,
+ "AP_JCORE_TIMER_STARTING",
+ jcore_pit_local_init, NULL);
+
+ return 0;
+}
+
+CLOCKSOURCE_OF_DECLARE(jcore_pit, "jcore,pit", jcore_pit_init);
diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index c184eb84101e..4f87f3e76d83 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -152,6 +152,13 @@ static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
+{
+ struct sun5i_timer_clksrc *cs = to_sun5i_timer_clksrc(clksrc);
+
+ return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
+}
+
static int sun5i_rate_cb_clksrc(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -210,8 +217,13 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
base + TIMER_CTL_REG(1));
- ret = clocksource_mmio_init(base + TIMER_CNTVAL_LO_REG(1), node->name,
- rate, 340, 32, clocksource_mmio_readl_down);
+ cs->clksrc.name = node->name;
+ cs->clksrc.rating = 340;
+ cs->clksrc.read = sun5i_clksrc_read;
+ cs->clksrc.mask = CLOCKSOURCE_MASK(32);
+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ ret = clocksource_register_hz(&cs->clksrc, rate);
if (ret) {
pr_err("Couldn't register clock source.\n");
goto err_remove_notifier;
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 9b207a8c5af3..afe641c02dca 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -81,6 +81,7 @@ enum cpuhp_state {
CPUHP_AP_ARM_ARCH_TIMER_STARTING,
CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
CPUHP_AP_DUMMY_TIMER_STARTING,
+ CPUHP_AP_JCORE_TIMER_STARTING,
CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
CPUHP_AP_ARM_TWD_STARTING,
CPUHP_AP_METAG_TIMER_STARTING,