aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-28 13:44:09 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-28 13:44:09 -0700
commit057d5e986e947b57510f005ffa4fe666fb20947e (patch)
tree8010b0e7d96bc02e761edfe0215b3910add7f858
parentec220be785cc782ff7e77f79e4b6b749570739bf (diff)
parentbf4169100c909667ede6af67668b3ecce6928343 (diff)
downloadlinux-stericsson-057d5e986e947b57510f005ffa4fe666fb20947e.tar.gz
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang: "Some driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: ismt: initialize DMA buffer i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE is set i2c: mv64xxx: Do not use writel_relaxed() i2c: mv64xxx: Fix some build warnings i2c: s3c2410: fix clk_disable/clk_unprepare WARNings
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c26
-rw-r--r--drivers/i2c/busses/i2c-ismt.c3
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c16
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c2
4 files changed, 32 insertions, 15 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index dbecf08399f8..5888feef1ac5 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -98,6 +98,8 @@
#define DW_IC_ERR_TX_ABRT 0x1
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+
/*
* status codes
*/
@@ -388,22 +390,34 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
- u32 ic_con;
+ u32 ic_con, ic_tar = 0;
/* Disable the adapter */
__i2c_dw_enable(dev, false);
- /* set the slave (target) address */
- dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
-
/* if the slave address is ten bit address, enable 10BITADDR */
ic_con = dw_readl(dev, DW_IC_CON);
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
ic_con |= DW_IC_CON_10BITADDR_MASTER;
- else
+ /*
+ * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
+ * mode has to be enabled via bit 12 of IC_TAR register.
+ * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
+ * detected from registers.
+ */
+ ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+ } else {
ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+ }
+
dw_writel(dev, ic_con, DW_IC_CON);
+ /*
+ * Set the slave (target) address and enable 10-bit addressing mode
+ * if applicable.
+ */
+ dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
+
/* Enable the adapter */
__i2c_dw_enable(dev, true);
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 8ed79a086f85..1672effbcebb 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -393,6 +393,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc = &priv->hw[priv->head];
+ /* Initialize the DMA buffer */
+ memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer));
+
/* Initialize the descriptor */
memset(desc, 0, sizeof(struct ismt_desc));
desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 7f3a47443494..d3e9cc3153a9 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -234,9 +234,9 @@ static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data)
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
(msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT;
- writel_relaxed(data_reg_lo,
+ writel(data_reg_lo,
drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
- writel_relaxed(data_reg_hi,
+ writel(data_reg_hi,
drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
} else {
@@ -697,6 +697,7 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
#ifdef CONFIG_OF
+#ifdef CONFIG_HAVE_CLK
static int
mv64xxx_calc_freq(const int tclk, const int n, const int m)
{
@@ -726,16 +727,12 @@ mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
return false;
return true;
}
+#endif /* CONFIG_HAVE_CLK */
static int
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
struct device *dev)
{
- const struct of_device_id *device;
- struct device_node *np = dev->of_node;
- u32 bus_freq, tclk;
- int rc = 0;
-
/* CLK is mandatory when using DT to describe the i2c bus. We
* need to know tclk in order to calculate bus clock
* factors.
@@ -744,6 +741,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
/* Have OF but no CLK */
return -ENODEV;
#else
+ const struct of_device_id *device;
+ struct device_node *np = dev->of_node;
+ u32 bus_freq, tclk;
+ int rc = 0;
+
if (IS_ERR(drv_data->clk)) {
rc = -ENODEV;
goto out;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3535f3c0f7b4..3747b9bf67d6 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1178,8 +1178,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
i2c_del_adapter(&i2c->adap);
- clk_disable_unprepare(i2c->clk);
-
if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
s3c24xx_i2c_dt_gpio_free(i2c);