aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2012-10-11Merge Trond's bugfixesJ. Bruce Fields
Merge branch 'bugfixes' of git://linux-nfs.org/~trondmy/nfs-2.6 into for-3.7-incoming. Mainly needed for Bryan's "SUNRPC: Set alloc_slot for backchannel tcp ops", without which the 4.1 server oopses.
2012-10-10ipv4: fix route mark sparse warningstephen hemminger
Sparse complains about RTA_MARK which is should be host order according to include file and usage in iproute. net/ipv4/route.c:2223:46: warning: incorrect type in argument 3 (different base types) net/ipv4/route.c:2223:46: expected restricted __be32 [usertype] value net/ipv4/route.c:2223:46: got unsigned int [unsigned] [usertype] flowic_mark Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10bridge: Pull ip header into skb->data before looking into ip header.Sarveshwar Bandi
If lower layer driver leaves the ip header in the skb fragment, it needs to be first pulled into skb->data before inspecting ip header length or ip version number. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: replace scan_ip6() with in6_pton()Amerigo Wang
Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: enable automatic IPv6 address settingAmerigo Wang
Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: display IPv4 address in human-readable formatAmerigo Wang
It is weird to display IPv4 address in %x format, what's more, IPv6 address is disaplayed in human-readable format too. So, make it human-readable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: set different default min_pkt_size for different protocolsAmerigo Wang
ETH_ZLEN is too small for IPv6, so this default value is not suitable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: fix crash when generating IPv6 packetsAmerigo Wang
For IPv6, sizeof(struct ipv6hdr) = 40, thus the following expression will result negative: datalen = pkt_dev->cur_pkt_size - 14 - sizeof(struct ipv6hdr) - sizeof(struct udphdr) - pkt_dev->pkt_overhead; And, the check "if (datalen < sizeof(struct pktgen_hdr))" will be passed as "datalen" is promoted to unsigned, therefore will cause a crash later. This is a quick fix by checking if "datalen" is negative. The following patch will increase the default value of 'min_pkt_size' for IPv6. This bug should exist for a long time, so Cc -stable too. Cc: <stable@vger.kernel.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10Merge tag 'master-2012-10-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is a batch of fixes intended for 3.7... Amitkumar Karwar provides a couple of mwifiex fixes to correctly report some reason codes for certain connection failures. He also provides a fix to cleanup after a scanning failure. Bing Zhao rounds that out with another mwifiex scanning fix. Daniel Golle gives us a fix for a copy/paste error in rt2x00. Felix Fietkau brings a couple of ath9k fixes related to suspend/resume, and a couple of fixes to prevent memory leaks in ath9k and mac80211. Ronald Wahl sends a carl9170 fix for a sleep in softirq context. Thomas Pedersen reorders some code to prevent drv_get_tsf from being called while holding a spinlock, now that it can sleep. Finally, Wei Yongjun prevents a NULL pointer dereference in the ath5k driver. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10Merge tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Features include: - Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1 Aside from the issues discussed at the LKS, distros are shipping NFSv4.1 with all the trimmings. - Fix fdatasync()/fsync() for the corner case of a server reboot. - NFSv4 OPEN access fix: finally distinguish correctly between open-for-read and open-for-execute permissions in all situations. - Ensure that the TCP socket is closed when we're in CLOSE_WAIT - More idmapper bugfixes - Lots of pNFS bugfixes and cleanups to remove unnecessary state and make the code easier to read. - In cases where a pNFS read or write fails, allow the client to resume trying layoutgets after two minutes of read/write- through-mds. - More net namespace fixes to the NFSv4 callback code. - More net namespace fixes to the NFSv3 locking code. - More NFSv4 migration preparatory patches. Including patches to detect network trunking in both NFSv4 and NFSv4.1 - pNFS block updates to optimise LAYOUTGET calls." * tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (113 commits) pnfsblock: cleanup nfs4_blkdev_get NFS41: send real read size in layoutget NFS41: send real write size in layoutget NFS: track direct IO left bytes NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked() NFSv4.1: Ensure that the layout sequence id stays 'close' to the current NFSv4.1: Deal with seqid wraparound in the pNFS return-on-close code NFSv4 set open access operation call flag in nfs4_init_opendata_res NFSv4.1: Remove the dependency on CONFIG_EXPERIMENTAL NFSv4 reduce attribute requests for open reclaim NFSv4: nfs4_open_done first must check that GETATTR decoded a file type NFSv4.1: Deal with wraparound when updating the layout "barrier" seqid NFSv4.1: Deal with wraparound issues when updating the layout stateid NFSv4.1: Always set the layout stateid if this is the first layoutget NFSv4.1: Fix another refcount issue in pnfs_find_alloc_layout NFSv4: don't put ACCESS in OPEN compound if O_EXCL NFSv4: don't check MAY_WRITE access bit in OPEN NFS: Set key construction data for the legacy upcall NFSv4.1: don't do two EXCHANGE_IDs on mount NFS: nfs41_walk_client_list(): re-lock before iterating ...
2012-10-09rbd: reset BACKOFF if unable to re-queueAlex Elder
If ceph_fault() is unable to queue work after a delay, it sets the BACKOFF connection flag so con_work() will attempt to do so. In con_work(), when BACKOFF is set, if queue_delayed_work() doesn't result in newly-queued work, it simply ignores this condition and proceeds as if no backoff delay were desired. There are two problems with this--one of which is a bug. The first problem is simply that the intended behavior is to back off, and if we aren't able queue the work item to run after a delay we're not doing that. The only reason queue_delayed_work() won't queue work is if the provided work item is already queued. In the messenger, this means that con_work() is already scheduled to be run again. So if we simply set the BACKOFF flag again when this occurs, we know the next con_work() call will again attempt to hold off activity on the connection until after the delay. The second problem--the bug--is a leak of a reference count. If queue_delayed_work() returns 0 in con_work(), con->ops->put() drops the connection reference held on entry to con_work(). However, processing is (was) allowed to continue, and at the end of the function a second con->ops->put() is called. This patch fixes both problems. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-10-09nfs: disintegrate UAPI for nfsJ. Bruce Fields
This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-10-09RDS: fix rds-ping spinlock recursionjeff.liu
This is the revised patch for fixing rds-ping spinlock recursion according to Venkat's suggestions. RDS ping/pong over TCP feature has been broken for years(2.6.39 to 3.6.0) since we have to set TCP cork and call kernel_sendmsg() between ping/pong which both need to lock "struct sock *sk". However, this lock has already been hold before rds_tcp_data_ready() callback is triggerred. As a result, we always facing spinlock resursion which would resulting in system panic. Given that RDS ping is only used to test the connectivity and not for serious performance measurements, we can queue the pong transmit to rds_wq as a delayed response. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> CC: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> CC: David S. Miller <davem@davemloft.net> CC: James Morris <james.l.morris@oracle.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
Pulled mainline in order to get the UAPI infrastructure already merged before I pull in David Howells's UAPI trees for networking. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09rbtree: empty nodes have no colorMichel Lespinasse
Empty nodes have no color. We can make use of this property to simplify the code emitted by the RB_EMPTY_NODE and RB_CLEAR_NODE macros. Also, we can get rid of the rb_init_node function which had been introduced by commit 88d19cf37952 ("timers: Add rb_init_node() to allow for stack allocated rb nodes") to avoid some issue with the empty node's color not being initialized. I'm not sure what the RB_EMPTY_NODE checks in rb_prev() / rb_next() are doing there, though. axboe introduced them in commit 10fd48f2376d ("rbtree: fixed reversed RB_EMPTY_NODE and rb_next/prev"). The way I see it, the 'empty node' abstraction is only used by rbtree users to flag nodes that they haven't inserted in any rbtree, so asking the predecessor or successor of such nodes doesn't make any sense. One final rb_init_node() caller was recently added in sysctl code to implement faster sysctl name lookups. This code doesn't make use of RB_EMPTY_NODE at all, and from what I could see it only called rb_init_node() under the mistaken assumption that such initialization was required before node insertion. [sfr@canb.auug.org.au: fix net/ceph/osd_client.c build] Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Santos <daniel.santos@pobox.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09ipvs: initialize returned data in do_ip_vs_get_ctlArnd Bergmann
As reported by a gcc warning, the do_ip_vs_get_ctl does not initalize all the members of the ip_vs_timeout_user structure it returns if at least one of the TCP or UDP protocols is disabled for ipvs. This makes sure that the data is always initialized, before it is returned as a response to IPVS_CMD_GET_CONFIG or printed as a debug message in IPVS_CMD_SET_CONFIG. Without this patch, building ARM ixp4xx_defconfig results in: net/netfilter/ipvs/ip_vs_ctl.c: In function 'ip_vs_genl_set_cmd': net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.udp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.udp_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_fin_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_fin_timeout' was declared here net/netfilter/ipvs/ip_vs_ctl.c:2238:47: warning: 't.tcp_timeout' may be used uninitialized in this function [-Wuninitialized] net/netfilter/ipvs/ip_vs_ctl.c:3322:28: note: 't.tcp_timeout' was declared here Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-08ipvs: fix ARP resolving for direct routing modeJulian Anastasov
After the change "Make neigh lookups directly in output packet path" (commit a263b30936) IPVS can not reach the real server for DR mode because we resolve the destination address from IP header, not from route neighbour. Use the new FLOWI_FLAG_KNOWN_NH flag to request output routes with known nexthop, so that it has preference on resolving. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: Add FLOWI_FLAG_KNOWN_NHJulian Anastasov
Add flag to request that output route should be returned with known rt_gateway, in case we want to use it as nexthop for neighbour resolving. The returned route can be cached as follows: - in NH exception: because the cached routes are not shared with other destinations - in FIB NH: when using gateway because all destinations for NH share same gateway As last option, to return rt_gateway!=0 we have to set DST_NOCACHE. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: introduce rt_uses_gatewayJulian Anastasov
Add new flag to remember when route is via gateway. We will use it to allow rt_gateway to contain address of directly connected host for the cases when DST_NOCACHE is used or when the NH exception caches per-destination route without DST_NOCACHE flag, i.e. when routes are not used for other destinations. By this way we force the neighbour resolving to work with the routed destination but we can use different address in the packet, feature needed for IPVS-DR where original packet for virtual IP is routed via route to real IP. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: make sure nh_pcpu_rth_output is always allocatedJulian Anastasov
Avoid checking nh_pcpu_rth_output in fast path, abort fib_info creation on alloc_percpu failure. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: fix forwarding for strict source routesJulian Anastasov
After the change "Adjust semantics of rt->rt_gateway" (commit f8126f1d51) rt_gateway can be 0 but ip_forward() compares it directly with nexthop. What we want here is to check if traffic is to directly connected nexthop and to fail if using gateway. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: fix sending of redirectsJulian Anastasov
After "Cache input routes in fib_info nexthops" (commit d2d68ba9fe) and "Elide fib_validate_source() completely when possible" (commit 7a9bc9b81a) we can not send ICMP redirects. It seems we should not cache the RTCF_DOREDIRECT flag in nh_rth_input because the same fib_info can be used for traffic that is not redirected, eg. from other input devices or from sources that are not in same subnet. As result, we have to disable the caching of RTCF_DOREDIRECT flag and to force source validation for the case when forwarding traffic to the input device. If traffic comes from directly connected source we allow redirection as it was done before both changes. Avoid setting RTCF_DOREDIRECT if IN_DEV_TX_REDIRECTS is disabled, this can avoid source address validation and to help caching the routes. After the change "Adjust semantics of rt->rt_gateway" (commit f8126f1d51) we should make sure our ICMP_REDIR_HOST messages contain daddr instead of 0.0.0.0 when target is directly connected. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv6: gro: fix PV6_GRO_CB(skb)->proto problemEric Dumazet
It seems IPV6_GRO_CB(skb)->proto can be destroyed in skb_gro_receive() if a new skb is allocated (to serve as an anchor for frag_list) We copy NAPI_GRO_CB() only (not the IPV6 specific part) in : *NAPI_GRO_CB(nskb) = *NAPI_GRO_CB(p); So we leave IPV6_GRO_CB(nskb)->proto to 0 (fresh skb allocation) instead of IPPROTO_TCP (6) ipv6_gro_complete() isnt able to call ops->gro_complete() [ tcp6_gro_complete() ] Fix this by moving proto in NAPI_GRO_CB() and getting rid of IPV6_GRO_CB Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08vlan: don't deliver frames for unknown vlans to protocolsFlorian Zumbiehl
6a32e4f9dd9219261f8856f817e6655114cfec2f made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08mac80211: use ieee80211_free_txskb to fix possible skb leaksFelix Fietkau
A few places free skbs using dev_kfree_skb even though they're called after ieee80211_subif_start_xmit might have cloned it for tracking tx status. Use ieee80211_free_txskb here to prevent skb leaks. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08mac80211: call drv_get_tsf() in sleepable contextThomas Pedersen
The call to drv_get/set_tsf() was put on the workqueue to perform tsf adjustments since that function might sleep. However it ended up inside a spinlock, whose critical section must be atomic. Do tsf adjustment outside the spinlock instead, and get rid of a warning. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-08net: gro: selective flush of packetsEric Dumazet
Current GRO can hold packets in gro_list for almost unlimited time, in case napi->poll() handler consumes its budget over and over. In this case, napi_complete()/napi_gro_flush() are not called. Another problem is that gro_list is flushed in non friendly way : We scan the list and complete packets in the reverse order. (youngest packets first, oldest packets last) This defeats priorities that sender could have cooked. Since GRO currently only store TCP packets, we dont really notice the bug because of retransmits, but this behavior can add unexpected latencies, particularly on mice flows clamped by elephant flows. This patch makes sure no packet can stay more than 1 ms in queue, and only in stress situations. It also complete packets in the right order to minimize latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jesse Gross <jesse@nicira.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: Don't report stale pmtu values to userspaceSteffen Klassert
We report cached pmtu values even if they are already expired. Change this to not report these values after they are expired and fix a race in the expire time calculation, as suggested by Eric Dumazet. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: Don't create nh exeption when the device mtu is smaller than the ↵Steffen Klassert
reported pmtu When a local tool like tracepath tries to send packets bigger than the device mtu, we create a nh exeption and set the pmtu to device mtu. The device mtu does not expire, so check if the device mtu is smaller than the reported pmtu and don't crerate a nh exeption in that case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08ipv4: Always invalidate or update the route on pmtu eventsSteffen Klassert
Some protocols, like IPsec still cache routes. So we need to invalidate the old route on pmtu events to avoid the reuse of stale routes. We also need to update the mtu and expire time of the route if we already use a nh exception route, otherwise we ignore newly learned pmtu values after the first expiration. With this patch we always invalidate or update the route on pmtu events. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-08KEYS: Add payload preparsing opportunity prior to key instantiate or updateDavid Howells
Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "The bulk of this pull is a series from Alex that refactors and cleans up the RBD code to lay the groundwork for supporting the new image format and evolving feature set. There are also some cleanups in libceph, and for ceph there's fixed validation of file striping layouts and a bugfix in the code handling a shrinking MDS cluster." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits) ceph: avoid 32-bit page index overflow ceph: return EIO on invalid layout on GET_DATALOC ioctl rbd: BUG on invalid layout ceph: propagate layout error on osd request creation libceph: check for invalid mapping ceph: convert to use le32_add_cpu() ceph: Fix oops when handling mdsmap that decreases max_mds rbd: update remaining header fields for v2 rbd: get snapshot name for a v2 image rbd: get the snapshot context for a v2 image rbd: get image features for a v2 image rbd: get the object prefix for a v2 rbd image rbd: add code to get the size of a v2 rbd image rbd: lay out header probe infrastructure rbd: encapsulate code that gets snapshot info rbd: add an rbd features field rbd: don't use index in __rbd_add_snap_dev() rbd: kill create_snap sysfs entry rbd: define rbd_dev_image_id() rbd: define some new format constants ...
2012-10-07net: gro: fix a potential crash in skb_gro_reset_offsetEric Dumazet
Before accessing skb first fragment, better make sure there is one. This is probably not needed for old kernels, since an ethernet frame cannot contain only an ethernet header, but the recent GRO addition to tunnels makes this patch needed. Also skb_gro_reset_offset() can be static, it actually allows compiler to inline it. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07ipv6: GRO should be ECN friendlyEric Dumazet
IPv4 side of the problem was addressed in commit a9e050f4e7f9d (net: tcp: GRO should be ECN friendly) This patch does the same, but for IPv6 : A Traffic Class mismatch doesnt mean flows are different, but instead should force a flush of previous packets. This patch removes artificial packet reordering problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07net: Fix skb_under_panic oops in neigh_resolve_outputramesh.nagappa@gmail.com
The retry loop in neigh_resolve_output() and neigh_connected_output() call dev_hard_header() with out reseting the skb to network_header. This causes the retry to fail with skb_under_panic. The fix is to reset the network_header within the retry loop. Signed-off-by: Ramesh Nagappa <ramesh.nagappa@ericsson.com> Reviewed-by: Shawn Lu <shawn.lu@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Reviewed-by: Billie Alsup <billie.alsup@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07net: remove skb recyclingEric Dumazet
Over time, skb recycling infrastructure got litle interest and many bugs. Generic rx path skb allocation is now using page fragments for efficient GRO / TCP coalescing, and recyling a tx skb for rx path is not worth the pain. Last identified bug is that fat skbs can be recycled and it can endup using high order pages after few iterations. With help from Maxime Bizon, who pointed out that commit 87151b8689d (net: allow pskb_expand_head() to get maximum tailroom) introduced this regression for recycled skbs. Instead of fixing this bug, lets remove skb recycling. Drivers wanting really hot skbs should use build_skb() anyway, to allocate/populate sk_buff right before netif_receive_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07netlink: add reference of module in netlink_dump_startGao feng
I get a panic when I use ss -a and rmmod inet_diag at the same time. It's because netlink_dump uses inet_diag_dump which belongs to module inet_diag. I search the codes and find many modules have the same problem. We need to add a reference to the module which the cb->dump belongs to. Thanks for all help from Stephen,Jan,Eric,Steffen and Pablo. Change From v3: change netlink_dump_start to inline,suggestion from Pablo and Eric. Change From v2: delete netlink_dump_done,and call module_put in netlink_dump and netlink_sock_destruct. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David Miller: "The most important bit in here is the fix for input route caching from Eric Dumazet, it's a shame we couldn't fully analyze this in time for 3.6 as it's a 3.6 regression introduced by the routing cache removal. Anyways, will send quickly to -stable after you pull this in. Other changes of note: 1) Fix lockdep splats in team and bonding, from Eric Dumazet. 2) IPV6 adds link local route even when there is no link local address, from Nicolas Dichtel. 3) Fix ixgbe PTP implementation, from Jacob Keller. 4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya. 5) MAC length computed improperly in VLAN demux, from Antonio Quartulli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt Remove noisy printks from llcp_sock_connect tipc: prevent dropped connections due to rcvbuf overflow silence some noisy printks in irda team: set qdisc_tx_busylock to avoid LOCKDEP splat bonding: set qdisc_tx_busylock to avoid LOCKDEP splat sctp: check src addr when processing SACK to update transport state sctp: fix a typo in prototype of __sctp_rcv_lookup() ipv4: add a fib_type to fib_info can: mpc5xxx_can: fix section type conflict can: peak_pcmcia: fix error return code can: peak_pci: fix error return code cxgb4: Fix build error due to missing linux/vmalloc.h include. bnx2x: fix ring size for 10G functions cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params() ixgbe: add support for X540-AT1 ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit ixgbe: fix PTP ethtool timestamping function ixgbe: (PTP) Fix PPS interrupt code ixgbe: Fix PTP X540 SDP alignment code for PPS signal ...
2012-10-06sections: fix section conflicts in netAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06sections: fix section conflicts in net/canAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05net, TTY: initialize tty->driver_data before usageSasha Levin
Commit 9c650ffc ("TTY: ircomm_tty, add tty install") split _open() to _install() and _open(). It also moved the initialization of driver_data out of open(), but never added it to install() - causing a NULL ptr deref whenever the driver was used. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-04ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rtGao feng
as we hold dst_entry before we call __ip6_del_rt, so we should alse call dst_release not only return -ENOENT when the rt6_info is ip6_null_entry. and we already hold the dst entry, so I think it's safe to call dst_release out of the write-read lock. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04Remove noisy printks from llcp_sock_connectDave Jones
Validation of userspace input shouldn't trigger dmesg spamming. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04tipc: prevent dropped connections due to rcvbuf overflowErik Hugne
When large buffers are sent over connected TIPC sockets, it is likely that the sk_backlog will be filled up on the receiver side, but the TIPC flow control mechanism is happily unaware of this since that is based on message count. The sender will receive a TIPC_ERR_OVERLOAD message when this occurs and drop it's side of the connection, leaving it stale on the receiver end. By increasing the sk_rcvbuf to a 'worst case' value, we avoid the overload caused by a full backlog queue and the flow control will work properly. This worst case value is the max TIPC message size times the flow control window, multiplied by two because a sender will transmit up to double the window size before a port is marked congested. We multiply this by 2 to account for the sk_buff and other overheads. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04silence some noisy printks in irdaDave Jones
Fuzzing causes these printks to spew constantly. Changing them to DEBUG statements is consistent with other usage in the file, and makes them disappear when CONFIG_IRDA_DEBUG is disabled. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04sctp: check src addr when processing SACK to update transport stateNicolas Dichtel
Suppose we have an SCTP connection with two paths. After connection is established, path1 is not available, thus this path is marked as inactive. Then traffic goes through path2, but for some reasons packets are delayed (after rto.max). Because packets are delayed, the retransmit mechanism will switch again to path1. At this time, we receive a delayed SACK from path2. When we update the state of the path in sctp_check_transmitted(), we do not take into account the source address of the SACK, hence we update the wrong path. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04sctp: fix a typo in prototype of __sctp_rcv_lookup()Nicolas Dichtel
Just to avoid confusion when people only reads this prototype. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04ipv4: add a fib_type to fib_infoEric Dumazet
commit d2d68ba9fe8 (ipv4: Cache input routes in fib_info nexthops.) introduced a regression for forwarding. This was hard to reproduce but the symptom was that packets were delivered to local host instead of being forwarded. David suggested to add fib_type to fib_info so that we dont inadvertently share same fib_info for different purposes. With help from Julian Anastasov who provided very helpful hints, reproduced here : <quote> Can it be a problem related to fib_info reuse from different routes. For example, when local IP address is created for subnet we have: broadcast 192.168.0.255 dev DEV proto kernel scope link src 192.168.0.1 192.168.0.0/24 dev DEV proto kernel scope link src 192.168.0.1 local 192.168.0.1 dev DEV proto kernel scope host src 192.168.0.1 The "dev DEV proto kernel scope link src 192.168.0.1" is a reused fib_info structure where we put cached routes. The result can be same fib_info for 192.168.0.255 and 192.168.0.0/24. RTN_BROADCAST is cached only for input routes. Incoming broadcast to 192.168.0.255 can be cached and can cause problems for traffic forwarded to 192.168.0.0/24. So, this patch should solve the problem because it separates the broadcast from unicast traffic. And the ip_route_input_slow caching will work for local and broadcast input routes (above routes 1 and 3) just because they differ in scope and use different fib_info. </quote> Many thanks to Chris Clayton for his patience and help. Reported-by: Chris Clayton <chris2553@googlemail.com> Bisected-by: Chris Clayton <chris2553@googlemail.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: - big one - consolidation of descriptor-related logics; almost all of that is moved to fs/file.c (BTW, I'm seriously tempted to rename the result to fd.c. As it is, we have a situation when file_table.c is about handling of struct file and file.c is about handling of descriptor tables; the reasons are historical - file_table.c used to be about a static array of struct file we used to have way back). A lot of stray ends got cleaned up and converted to saner primitives, disgusting mess in android/binder.c is still disgusting, but at least doesn't poke so much in descriptor table guts anymore. A bunch of relatively minor races got fixed in process, plus an ext4 struct file leak. - related thing - fget_light() partially unuglified; see fdget() in there (and yes, it generates the code as good as we used to have). - also related - bits of Cyrill's procfs stuff that got entangled into that work; _not_ all of it, just the initial move to fs/proc/fd.c and switch of fdinfo to seq_file. - Alex's fs/coredump.c spiltoff - the same story, had been easier to take that commit than mess with conflicts. The rest is a separate pile, this was just a mechanical code movement. - a few misc patches all over the place. Not all for this cycle, there'll be more (and quite a few currently sit in akpm's tree)." Fix up trivial conflicts in the android binder driver, and some fairly simple conflicts due to two different changes to the sock_alloc_file() interface ("take descriptor handling from sock_alloc_file() to callers" vs "net: Providing protocol type via system.sockprotoname xattr of /proc/PID/fd entries" adding a dentry name to the socket) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits) MAX_LFS_FILESIZE should be a loff_t compat: fs: Generic compat_sys_sendfile implementation fs: push rcu_barrier() from deactivate_locked_super() to filesystems btrfs: reada_extent doesn't need kref for refcount coredump: move core dump functionality into its own file coredump: prevent double-free on an error path in core dumper usb/gadget: fix misannotations fcntl: fix misannotations ceph: don't abuse d_delete() on failure exits hypfs: ->d_parent is never NULL or negative vfs: delete surplus inode NULL check switch simple cases of fget_light to fdget new helpers: fdget()/fdput() switch o2hb_region_dev_write() to fget_light() proc_map_files_readdir(): don't bother with grabbing files make get_file() return its argument vhost_set_vring(): turn pollstart/pollstop into bool switch prctl_set_mm_exe_file() to fget_light() switch xfs_find_handle() to fget_light() switch xfs_swapext() to fget_light() ...
2012-10-028021q: fix mac_len recomputation in vlan_untag()Antonio Quartulli
skb_reset_mac_len() relies on the value of the skb->network_header pointer, therefore we must wait for such pointer to be recalculated before computing the new mac_len value. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: David S. Miller <davem@davemloft.net>