aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-09-07mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau
commit 2dfca312a91631311c1cf7c090246cc8103de038 upstream. brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07mac80211: add missing channel context releaseJohannes Berg
commit 2a3ba63c235fdcd37f6451bdf4a0c7865a3930cf upstream. IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07SUNRPC: Fix memory corruption issue on 32-bit highmem systemsTrond Myklebust
commit 347e2233b7667e336d9f671f1a52dfa3f0416e2c upstream. Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by: Mark Young <MYoung@nvidia.com> Reported-by: Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Matt Craighead <mcraighead@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29NFC: llcp: Fix non blocking sockets connectionsSamuel Ortiz
commit b4011239a08e7e6c2c6e970dfa9e8ecb73139261 upstream. Without the new LLCP_CONNECTING state, non blocking sockets will be woken up with a POLLHUP right after calling connect() because their state is stuck at LLCP_CLOSED. That prevents userspace from implementing any proper non blocking socket based NFC p2p client. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29mac80211: don't wait for TX status foreverJohannes Berg
commit cb236d2d713cff83d024a82b836757d9e2b50715 upstream. TX status notification can get lost, or the frames could get stuck on the queue, so don't wait for the callback from the driver forever and instead time out after half a second. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20Revert "genetlink: fix family dump race"Greg Kroah-Hartman
This reverts commit aab4f8d490ef8c184d854d5f630438c10406765c, commit 58ad436fcf49810aa006016107f494c9ac9013db upstream, as it causes problems. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20nl80211: fix another nl80211_fam.attrbuf raceJohannes Berg
commit c319d50bfcf678c2857038276d9fab3c6646f3bf upstream. This is similar to the race Linus had reported, but in this case it's an older bug: nl80211_prepare_wdev_dump() uses the wiphy index in cb->args[0] as it is and thus parses the message over and over again instead of just once because 0 is the first valid wiphy index. Similar code in nl80211_testmode_dump() correctly offsets the wiphy_index by 1, do that here as well. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20cfg80211: fix P2P GO interface teardownJohannes Berg
commit 74418edec915d0f446debebde08d170c7b8ba0ee upstream. When a P2P GO interface goes down, cfg80211 doesn't properly tear it down, leading to warnings later. Add the GO interface type to the enumeration to tear it down like AP interfaces. Otherwise, we leave it pending and mac80211's state can get very confused, leading to warnings later. Reported-by: Ilan Peer <ilan.peer@intel.com> Tested-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20genetlink: fix family dump raceJohannes Berg
commit 58ad436fcf49810aa006016107f494c9ac9013db upstream. When dumping generic netlink families, only the first dump call is locked with genl_lock(), which protects the list of families, and thus subsequent calls can access the data without locking, racing against family addition/removal. This can cause a crash. Fix it - the locking needs to be conditional because the first time around it's already locked. A similar bug was reported to me on an old kernel (3.4.47) but the exact scenario that happened there is no longer possible, on those kernels the first round wasn't locked either. Looking at the current code I found the race described above, which had also existed on the old kernel. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20mac80211: continue using disabled channels while connectedJohannes Berg
commit ddfe49b42d8ad4bfdf92d63d4a74f162660d878d upstream. In case the AP has different regulatory information than we do, it can happen that we connect to an AP based on e.g. the world roaming regulatory data, and then update our database with the AP's country information disables the channel the AP is using. If this happens on an HT AP, the bandwidth tracking code will hit the WARN_ON() and disconnect. Since that's not very useful, ignore the channel-disable flag in bandwidth tracking. Reported-by: Chris Wright <chrisw@sous-sol.org> Tested-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20mac80211: fix infinite loop in ieee80211_determine_chantypeChris Wright
commit b56e4b857c5210e848bfb80e074e5756a36cd523 upstream. Commit "3d9646d mac80211: fix channel selection bug" introduced a possible infinite loop by moving the out target above the chandef_downgrade while loop. When we downgrade to NL80211_CHAN_WIDTH_20_NOHT, we jump back up to re-run the while loop...indefinitely. Replace goto with break and carry on. This may not be sufficient to connect to the AP, but will at least keep the cpu from livelocking. Thanks to Derek Atkins as an extra pair of debugging eyes. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20mac80211: ignore HT primary channel while connectedJohannes Berg
commit 5cdaed1e878d723d56d04ae0be1738124acf9f46 upstream. While we're connected, the AP shouldn't change the primary channel in the HT information. We checked this, and dropped the connection if it did change it. Unfortunately, this is causing problems on some APs, e.g. on the Netgear WRT610NL: the beacons seem to always contain a bad channel and if we made a connection using a probe response (correct data) we drop the connection immediately and can basically not connect properly at all. Work around this by ignoring the HT primary channel information in beacons if we're already connected. Also print out more verbose messages in the other situations to help diagnose similar bugs quicker in the future. Acked-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14SUNRPC: If the rpcbind channel is disconnected, fail the call to unregisterTrond Myklebust
commit 786615bc1ce84150ded80daea6bd9f6297f48e73 upstream. If rpcbind causes our connection to the AF_LOCAL socket to close after we've registered a service, then we want to be careful about reconnecting since the mount namespace may have changed. By simply refusing to reconnect the AF_LOCAL socket in the case of unregister, we avoid the need to somehow save the mount namespace. While this may lead to some services not unregistering properly, it should be safe. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Nix <nix@esperi.org.uk> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14SUNRPC: Don't auto-disconnect from the local rpcbind socketTrond Myklebust
commit 00326ed6442c66021cd4b5e19e80f3e2027d5d42 upstream. There is no need for the kernel to time out the AF_LOCAL connection to the rpcbind socket, and doing so is problematic because when it is time to reconnect, our process may no longer be using the same mount namespace. Reported-by: Nix <nix@esperi.org.uk> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11net_sched: info leak in atm_tc_dump_class()Dan Carpenter
[ Upstream commit 8cb3b9c3642c0263d48f31d525bcee7170eedc20 ] The "pvc" struct has a hole after pvc.sap_family which is not cleared. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11af_key: more info leaks in pfkey messagesDan Carpenter
[ Upstream commit ff862a4668dd6dba962b1d2d8bd344afa6375683 ] This is inspired by a5cc68f3d6 "af_key: fix info leaks in notify messages". There are some struct members which don't get initialized and could disclose small amounts of private information. Acked-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11net_sched: Fix stack info leak in cbq_dump_wrr().David S. Miller
[ Upstream commit a0db856a95a29efb1c23db55c02d9f0ff4f0db48 ] Make sure the reserved fields, and padding (if any), are fully initialized. Based upon a patch by Dan Carpenter and feedback from Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11genetlink: release cb_lock before requesting additional moduleStanislaw Gruszka
[ Upstream commit c74f2b2678f40b80265dd53556f1f778c8e1823f ] Requesting external module with cb_lock taken can result in the deadlock like showed below: [ 2458.111347] Showing all locks held in the system: [ 2458.111347] 1 lock held by NetworkManager/582: [ 2458.111347] #0: (cb_lock){++++++}, at: [<ffffffff8162bc79>] genl_rcv+0x19/0x40 [ 2458.111347] 1 lock held by modprobe/603: [ 2458.111347] #0: (cb_lock){++++++}, at: [<ffffffff8162baa5>] genl_lock_all+0x15/0x30 [ 2461.579457] SysRq : Show Blocked State [ 2461.580103] task PC stack pid father [ 2461.580103] NetworkManager D ffff880034b84500 4040 582 1 0x00000080 [ 2461.580103] ffff8800197ff720 0000000000000046 00000000001d5340 ffff8800197fffd8 [ 2461.580103] ffff8800197fffd8 00000000001d5340 ffff880019631700 7fffffffffffffff [ 2461.580103] ffff8800197ff880 ffff8800197ff878 ffff880019631700 ffff880019631700 [ 2461.580103] Call Trace: [ 2461.580103] [<ffffffff817355f9>] schedule+0x29/0x70 [ 2461.580103] [<ffffffff81731ad1>] schedule_timeout+0x1c1/0x360 [ 2461.580103] [<ffffffff810e69eb>] ? mark_held_locks+0xbb/0x140 [ 2461.580103] [<ffffffff817377ac>] ? _raw_spin_unlock_irq+0x2c/0x50 [ 2461.580103] [<ffffffff810e6b6d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 2461.580103] [<ffffffff81736398>] wait_for_completion_killable+0xe8/0x170 [ 2461.580103] [<ffffffff810b7fa0>] ? wake_up_state+0x20/0x20 [ 2461.580103] [<ffffffff81095825>] call_usermodehelper_exec+0x1a5/0x210 [ 2461.580103] [<ffffffff817362ed>] ? wait_for_completion_killable+0x3d/0x170 [ 2461.580103] [<ffffffff81095cc3>] __request_module+0x1b3/0x370 [ 2461.580103] [<ffffffff810e6b6d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 2461.580103] [<ffffffff8162c5c9>] ctrl_getfamily+0x159/0x190 [ 2461.580103] [<ffffffff8162d8a4>] genl_family_rcv_msg+0x1f4/0x2e0 [ 2461.580103] [<ffffffff8162d990>] ? genl_family_rcv_msg+0x2e0/0x2e0 [ 2461.580103] [<ffffffff8162da1e>] genl_rcv_msg+0x8e/0xd0 [ 2461.580103] [<ffffffff8162b729>] netlink_rcv_skb+0xa9/0xc0 [ 2461.580103] [<ffffffff8162bc88>] genl_rcv+0x28/0x40 [ 2461.580103] [<ffffffff8162ad6d>] netlink_unicast+0xdd/0x190 [ 2461.580103] [<ffffffff8162b149>] netlink_sendmsg+0x329/0x750 [ 2461.580103] [<ffffffff815db849>] sock_sendmsg+0x99/0xd0 [ 2461.580103] [<ffffffff810bb58f>] ? local_clock+0x5f/0x70 [ 2461.580103] [<ffffffff810e96e8>] ? lock_release_non_nested+0x308/0x350 [ 2461.580103] [<ffffffff815dbc6e>] ___sys_sendmsg+0x39e/0x3b0 [ 2461.580103] [<ffffffff810565af>] ? kvm_clock_read+0x2f/0x50 [ 2461.580103] [<ffffffff810218b9>] ? sched_clock+0x9/0x10 [ 2461.580103] [<ffffffff810bb2bd>] ? sched_clock_local+0x1d/0x80 [ 2461.580103] [<ffffffff810bb448>] ? sched_clock_cpu+0xa8/0x100 [ 2461.580103] [<ffffffff810e33ad>] ? trace_hardirqs_off+0xd/0x10 [ 2461.580103] [<ffffffff810bb58f>] ? local_clock+0x5f/0x70 [ 2461.580103] [<ffffffff810e3f7f>] ? lock_release_holdtime.part.28+0xf/0x1a0 [ 2461.580103] [<ffffffff8120fec9>] ? fget_light+0xf9/0x510 [ 2461.580103] [<ffffffff8120fe0c>] ? fget_light+0x3c/0x510 [ 2461.580103] [<ffffffff815dd1d2>] __sys_sendmsg+0x42/0x80 [ 2461.580103] [<ffffffff815dd222>] SyS_sendmsg+0x12/0x20 [ 2461.580103] [<ffffffff81741ad9>] system_call_fastpath+0x16/0x1b [ 2461.580103] modprobe D ffff88000f2c8000 4632 603 602 0x00000080 [ 2461.580103] ffff88000f04fba8 0000000000000046 00000000001d5340 ffff88000f04ffd8 [ 2461.580103] ffff88000f04ffd8 00000000001d5340 ffff8800377d4500 ffff8800377d4500 [ 2461.580103] ffffffff81d0b260 ffffffff81d0b268 ffffffff00000000 ffffffff81d0b2b0 [ 2461.580103] Call Trace: [ 2461.580103] [<ffffffff817355f9>] schedule+0x29/0x70 [ 2461.580103] [<ffffffff81736d4d>] rwsem_down_write_failed+0xed/0x1a0 [ 2461.580103] [<ffffffff810bb200>] ? update_cpu_load_active+0x10/0xb0 [ 2461.580103] [<ffffffff8137b473>] call_rwsem_down_write_failed+0x13/0x20 [ 2461.580103] [<ffffffff8173492d>] ? down_write+0x9d/0xb2 [ 2461.580103] [<ffffffff8162baa5>] ? genl_lock_all+0x15/0x30 [ 2461.580103] [<ffffffff8162baa5>] genl_lock_all+0x15/0x30 [ 2461.580103] [<ffffffff8162cbb3>] genl_register_family+0x53/0x1f0 [ 2461.580103] [<ffffffffa01dc000>] ? 0xffffffffa01dbfff [ 2461.580103] [<ffffffff8162d650>] genl_register_family_with_ops+0x20/0x80 [ 2461.580103] [<ffffffffa01dc000>] ? 0xffffffffa01dbfff [ 2461.580103] [<ffffffffa017fe84>] nl80211_init+0x24/0xf0 [cfg80211] [ 2461.580103] [<ffffffffa01dc000>] ? 0xffffffffa01dbfff [ 2461.580103] [<ffffffffa01dc043>] cfg80211_init+0x43/0xdb [cfg80211] [ 2461.580103] [<ffffffff810020fa>] do_one_initcall+0xfa/0x1b0 [ 2461.580103] [<ffffffff8105cb93>] ? set_memory_nx+0x43/0x50 [ 2461.580103] [<ffffffff810f75af>] load_module+0x1c6f/0x27f0 [ 2461.580103] [<ffffffff810f2c90>] ? store_uevent+0x40/0x40 [ 2461.580103] [<ffffffff810f82c6>] SyS_finit_module+0x86/0xb0 [ 2461.580103] [<ffffffff81741ad9>] system_call_fastpath+0x16/0x1b [ 2461.580103] Sched Debug Version: v0.10, 3.11.0-0.rc1.git4.1.fc20.x86_64 #1 Problem start to happen after adding net-pf-16-proto-16-family-nl80211 alias name to cfg80211 module by below commit (though that commit itself is perfectly fine): commit fb4e156886ce6e8309e912d8b370d192330d19d3 Author: Marcel Holtmann <marcel@holtmann.org> Date: Sun Apr 28 16:22:06 2013 -0700 nl80211: Add generic netlink module alias for cfg80211/nl80211 Reported-and-tested-by: Jeff Layton <jlayton@redhat.com> Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanupHannes Frederic Sowa
[ Upstream commit 905a6f96a1b18e490a75f810d733ced93c39b0e5 ] Otherwise we end up dereferencing the already freed net->ipv6.mrt pointer which leads to a panic (from Srivatsa S. Bhat): BUG: unable to handle kernel paging request at ffff882018552020 IP: [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] PGD 290a067 PUD 207ffe0067 PMD 207ff1d067 PTE 8000002018552060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: ebtable_nat ebtables nfs fscache nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables nfsd lockd nfs_acl exportfs auth_rpcgss autofs4 sunrpc 8021q garp bridge stp llc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter +ip6_tables ipv6 vfat fat vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support cdc_ether usbnet mii microcode i2c_i801 i2c_core lpc_ich mfd_core shpchp ioatdma dca mlx4_core be2net wmi acpi_cpufreq mperf ext4 jbd2 mbcache dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 7 Comm: kworker/u33:0 Not tainted 3.11.0-rc1-ea45e-a #4 Hardware name: IBM -[8737R2A]-/00Y2738, BIOS -[B2E120RUS-1.20]- 11/30/2012 Workqueue: netns cleanup_net task: ffff8810393641c0 ti: ffff881039366000 task.ti: ffff881039366000 RIP: 0010:[<ffffffffa0366b02>] [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] RSP: 0018:ffff881039367bd8 EFLAGS: 00010286 RAX: ffff881039367fd8 RBX: ffff882018552000 RCX: dead000000200200 RDX: 0000000000000000 RSI: ffff881039367b68 RDI: ffff881039367b68 RBP: ffff881039367bf8 R08: ffff881039367b68 R09: 2222222222222222 R10: 2222222222222222 R11: 2222222222222222 R12: ffff882015a7a040 R13: ffff882014eb89c0 R14: ffff8820289e2800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88103fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882018552020 CR3: 0000000001c0b000 CR4: 00000000000407f0 Stack: ffff881039367c18 ffff882014eb89c0 ffff882015e28c00 0000000000000000 ffff881039367c18 ffffffffa034d9d1 ffff8820289e2800 ffff882014eb89c0 ffff881039367c58 ffffffff815bdecb ffffffff815bddf2 ffff882014eb89c0 Call Trace: [<ffffffffa034d9d1>] rawv6_close+0x21/0x40 [ipv6] [<ffffffff815bdecb>] inet_release+0xfb/0x220 [<ffffffff815bddf2>] ? inet_release+0x22/0x220 [<ffffffffa032686f>] inet6_release+0x3f/0x50 [ipv6] [<ffffffff8151c1d9>] sock_release+0x29/0xa0 [<ffffffff81525520>] sk_release_kernel+0x30/0x70 [<ffffffffa034f14b>] icmpv6_sk_exit+0x3b/0x80 [ipv6] [<ffffffff8152fff9>] ops_exit_list+0x39/0x60 [<ffffffff815306fb>] cleanup_net+0xfb/0x1a0 [<ffffffff81075e3a>] process_one_work+0x1da/0x610 [<ffffffff81075dc9>] ? process_one_work+0x169/0x610 [<ffffffff81076390>] worker_thread+0x120/0x3a0 [<ffffffff81076270>] ? process_one_work+0x610/0x610 [<ffffffff8107da2e>] kthread+0xee/0x100 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8162a99c>] ret_from_fork+0x7c/0xb0 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70 Code: 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 4c 8b 67 30 49 89 fd e8 db 3c 1e e1 49 8b 9c 24 90 08 00 00 48 85 db 74 06 <4c> 39 6b 20 74 20 bb f3 ff ff ff e8 8e 3c 1e e1 89 d8 4c 8b 65 RIP [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] RSP <ffff881039367bd8> CR2: ffff882018552020 Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11sysctl net: Keep tcp_syn_retries inside the boundaryMichal Tesar
[ Upstream commit 651e92716aaae60fc41b9652f54cb6803896e0da ] Limit the min/max value passed to the /proc/sys/net/ipv4/tcp_syn_retries. Signed-off-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11svcrpc: fix kfree oops in gss-proxy codeJ. Bruce Fields
commit 743e217129f69aab074abe520a464fd0c6b1cca1 upstream. mech_oid.data is an array, not kmalloc()'d memory. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11svcrpc: fix gss_rpc_upcall create errorJ. Bruce Fields
commit 9f96392b0ae6aefc02a9b900c3f4889dfafc8402 upstream. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11svcrpc: fix gss-proxy xdr decoding oopsJ. Bruce Fields
commit dc43376c26cef74226174a2394f37f2a3f8a8639 upstream. Uninitialized stack data was being used as the destination for memcpy's. Longer term we'll just delete some of this code; all we're doing is skipping over xdr that we don't care about. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11mac80211: fix monitor interface suspend crash regressionStanislaw Gruszka
commit cd34f647a78e7f2296fcb72392b9e5c832793e65 upstream. My commit: commit 12e7f517029dad819c45eca9ca01fdb9ba57616b Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Feb 28 10:55:26 2013 +0100 mac80211: cleanup generic suspend/resume procedures removed check for deleting MONITOR and AP_VLAN when suspend. That can cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove interface in the driver that we did not add before. Reference: http://marc.info/?l=linux-kernel&m=137391815113860&w=2 Bisected-by: Ortwin Glück <odi@odi.ch> Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11mac80211: fix ethtool stats for non-station interfacesJohannes Berg
commit e13bae4f807401729b3f27c7e882a96b8b292809 upstream. As reported in https://bugzilla.kernel.org/show_bug.cgi?id=60514, the station loop never initialises 'sinfo' and therefore adds up a stack values, leaking stack information (the number of times it adds values is easily obtained another way.) Fix this by initialising the sinfo for each station to add. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11mac80211: fix duplicate retransmission detectionJohannes Berg
commit 6b0f32745dcfba01d7be33acd1b40306c7a914c6 upstream. The duplicate retransmission detection code in mac80211 erroneously attempts to do the check for every frame, even frames that don't have a sequence control field or that don't use it (QoS-Null frames.) This is problematic because it causes the code to access data beyond the end of the SKB and depending on the data there will drop packets erroneously. Correct the code to not do duplicate detection for such frames. I found this error while testing AP powersave, it lead to retransmitted PS-Poll frames being dropped entirely as the data beyond the end of the SKB was always zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11mac80211/minstrel_ht: fix cck rate samplingFelix Fietkau
commit 1cd158573951f737fbc878a35cb5eb47bf9af3d5 upstream. The CCK group needs special treatment to set the right flags and rate index. Add this missing check to prevent setting broken rates for tx packets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11mac80211/minstrel: fix NULL pointer dereference issueFelix Fietkau
commit 5c9fc93bc9bc417418fc1b6366833ae6a07b804d upstream. When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move the assignment further down, after the rate_control_send_low call. Reported-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11nl80211: fix mgmt tx status and testmode reporting for netnsMichal Kazior
commit a0ec570f4f69c4cb700d743a915096c2c8f56a99 upstream. These two events were sent to the default network namespace. This caused AP mode in a non-default netns to not work correctly. Mgmt tx status was multicasted to a different (default) netns instead of the one the AP was in. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04svcrdma: underflow issue in decode_write_list()Dan Carpenter
commit b2781e1021525649c0b33fffd005ef219da33926 upstream. My static checker marks everything from ntohl() as untrusted and it complains we could have an underflow problem doing: return (u32 *)&ary->wc_array[nchunks]; Also on 32 bit systems the upper bound check could overflow. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vlan: fix a race in egress prio managementEric Dumazet
[ Upstream commit 3e3aac497513c669e1c62c71e1d552ea85c1d974 ] egress_priority_map[] hash table updates are protected by rtnl, and we never remove elements until device is dismantled. We have to make sure that before inserting an new element in hash table, all its fields are committed to memory or else another cpu could find corrupt values and crash. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vlan: mask vlan prio bitsEric Dumazet
[ Upstream commit d4b812dea4a236f729526facf97df1a9d18e191c ] In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28pkt_sched: sch_qfq: remove a source of high packet delay/jitterPaolo Valente
[ Upstream commit 87f40dd6ce7042caca0b3b557e8923127f51f902 ] QFQ+ inherits from QFQ a design choice that may cause a high packet delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a special quantity, the system virtual time, to track the service provided by the ideal system it approximates. When a packet is dequeued, this quantity must be incremented by the size of the packet, divided by the sum of the weights of the aggregates waiting to be served. Tracking this sum correctly is a non-trivial task, because, to preserve tight service guarantees, the decrement of this sum must be delayed in a special way [1]: this sum can be decremented only after that its value would decrease also in the ideal system approximated by QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous' weight sum, increased and decreased immediately as the weight of an aggregate changes, and as an aggregate is created or destroyed (which, in its turn, happens as a consequence of some class being created/destroyed/changed). However, to avoid the problems caused to service guarantees by these immediate decreases, QFQ+ increments the system virtual time using the maximum value allowed for the weight sum, 2^10, in place of the dynamic, instantaneous value. The instantaneous value of the weight sum is used only to check whether a request of weight increase or a class creation can be satisfied. Unfortunately, the problems caused by this choice are worse than the temporary degradation of the service guarantees that may occur, when a class is changed or destroyed, if the instantaneous value of the weight sum was used to update the system virtual time. In fact, the fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is equal to the ratio between the weight of the aggregate and the sum of the weights of the competing aggregates. The packet delay guaranteed to the aggregate is instead inversely proportional to the guaranteed bandwidth. By using the maximum possible value, and not the actual value of the weight sum, QFQ+ provides each aggregate with the worst possible service guarantees, and not with service guarantees related to the actual set of competing aggregates. To see the consequences of this fact, consider the following simple example. Suppose that only the following aggregates are backlogged, i.e., that only the classes in the following aggregates have packets to transmit: one aggregate with weight 10, say A, and ten aggregates with weight 1, say B1, B2, ..., B10. In particular, suppose that these aggregates are always backlogged. Given the weight distribution, the smoothest and fairest service order would be: A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ... QFQ+ would provide exactly this optimal service if it used the actual value for the weight sum instead of the maximum possible value, i.e., 11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it serves aggregates as follows (easy to prove and to reproduce experimentally): A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ... By replacing 10 with N in the above example, and by increasing N, one can increase at will the maximum packet delay and the jitter experienced by the classes in aggregate A. This patch addresses this issue by just using the above 'instantaneous' value of the weight sum, instead of the maximum possible value, when updating the system virtual time. After the instantaneous weight sum is decreased, QFQ+ may deviate from the ideal service for a time interval in the order of the time to serve one maximum-size packet for each backlogged class. The worst-case extent of the deviation exhibited by QFQ+ during this time interval [1] is basically the same as of the deviation described above (but, without this patch, QFQ+ suffers from such a deviation all the time). Finally, this patch modifies the comment to the function qfq_slot_insert, to make it coherent with the fact that the weight sum used by QFQ+ can now be lower than the maximum possible value. [1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix", Proceedings of AAA-IDEA'05, June 2005. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv4: set transport header earlierEric Dumazet
[ Upstream commit 21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 ] commit 45f00f99d6e ("ipv4: tcp: clean up tcp_v4_early_demux()") added a performance regression for non GRO traffic, basically disabling IP early demux. IPv6 stack resets transport header in ip6_rcv() before calling IP early demux in ip6_rcv_finish(), while IPv4 does this only in ip_local_deliver_finish(), _after_ IP early demux. GRO traffic happened to enable IP early demux because transport header is also set in inet_gro_receive() Instead of reverting the faulty commit, we can make IPv4/IPv6 behave the same : transport_header should be set in ip_rcv() instead of ip_local_deliver_finish() ip_local_deliver_finish() can also use skb_network_header_len() which is faster than ip_hdrlen() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: only static routes qualify for equal cost multipathingHannes Frederic Sowa
[ Upstream commit 307f2fb95e9b96b3577916e73d92e104f8f26494 ] Static routes in this case are non-expiring routes which did not get configured by autoconf or by icmpv6 redirects. To make sure we actually get an ecmp route while searching for the first one in this fib6_node's leafs, also make sure it matches the ecmp route assumptions. v2: a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF already ensures that this route, even if added again without RTF_EXPIRES (in case of a RA announcement with infinite timeout), does not cause the rt6i_nsiblings logic to go wrong if a later RA updates the expiration time later. v3: a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so, because an pmtu event could update the RTF_EXPIRES flag and we would not count this route, if another route joins this set. We now filter only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that don't get changed after rt6_info construction. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28gre: Fix MTU sizing check for gretap tunnelsAlexander Duyck
[ Upstream commit 8c91e162e058bb91b7766f26f4d5823a21941026 ] This change fixes an MTU sizing issue seen with gretap tunnels when non-gso packets are sent from the interface. In my case I was able to reproduce the issue by simply sending a ping of 1421 bytes with the gretap interface created on a device with a standard 1500 mtu. This fix is based on the fact that the tunnel mtu is already adjusted by dev->hard_header_len so it would make sense that any packets being compared against that mtu should also be adjusted by hard_header_len and the tunnel header instead of just the tunnel header. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: Cong Wang <amwang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: fix route selection if kernel is not compiled with CONFIG_IPV6_ROUTER_PREFHannes Frederic Sowa
[ Upstream commit afc154e978de1eb11c555bc8bcec1552f75ebc43 ] This is a follow-up patch to 3630d40067a21d4dfbadc6002bb469ce26ac5d52 ("ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available"). Since the removal of rt->n in rt6_info we can end up with a dst == NULL in rt6_check_neigh. In case the kernel is not compiled with CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown NUD state but we must not avoid doing round robin selection on routes with the same target. So introduce and pass down a boolean ``do_rr'' to indicate when we should update rt->rr_ptr. As soon as no route is valid we do backtracking and do a lookup on a higher level in the fib trie. v2: a) Improved rt6_check_neigh logic (no need to create neighbour there) and documented return values. v3: a) Introduce enum rt6_nud_state to get rid of the magic numbers (thanks to David Miller). b) Update and shorten commit message a bit to actualy reflect the source. Reported-by: Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-289p: fix off by one causing access violations and memory corruptionSasha Levin
[ Upstream commit 110ecd69a9feea82a152bbf9b12aba57e6396883 ] p9_release_pages() would attempt to dereference one value past the end of pages[]. This would cause the following crashes: [ 6293.171817] BUG: unable to handle kernel paging request at ffff8807c96f3000 [ 6293.174146] IP: [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.176447] PGD 79c5067 PUD 82c1e3067 PMD 82c197067 PTE 80000007c96f3060 [ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 6293.180060] Modules linked in: [ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G W 3.10.0-next-20130710-sasha #3954 [ 6293.180060] task: ffff8807b803b000 ti: ffff880787dde000 task.ti: ffff880787dde000 [ 6293.180060] RIP: 0010:[<ffffffff8412793b>] [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.214316] RSP: 0000:ffff880787ddfc28 EFLAGS: 00010202 [ 6293.214316] RAX: 0000000000000001 RBX: ffff8807c96f2ff8 RCX: 0000000000000000 [ 6293.222017] RDX: ffff8807b803b000 RSI: 0000000000000001 RDI: ffffea001c7e3d40 [ 6293.222017] RBP: ffff880787ddfc48 R08: 0000000000000000 R09: 0000000000000000 [ 6293.222017] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 [ 6293.222017] R13: 0000000000000001 R14: ffff8807cc50c070 R15: ffff8807cc50c070 [ 6293.222017] FS: 00007f572641d700(0000) GS:ffff8807f3600000(0000) knlGS:0000000000000000 [ 6293.256784] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6293.256784] CR2: ffff8807c96f3000 CR3: 00000007c8e81000 CR4: 00000000000006e0 [ 6293.256784] Stack: [ 6293.256784] ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8 [ 6293.256784] ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001 [ 6293.256784] ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000 [ 6293.256784] Call Trace: [ 6293.256784] [<ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630 [ 6293.256784] [<ffffffff8115c610>] ? wake_up_bit+0x40/0x40 [ 6293.256784] [<ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0 [ 6293.256784] [<ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120 [ 6293.256784] [<ffffffff84122a21>] p9_client_read+0xe1/0x2c0 [ 6293.256784] [<ffffffff81708a90>] v9fs_file_read+0x90/0xc0 [ 6293.256784] [<ffffffff812bd073>] vfs_read+0xc3/0x130 [ 6293.256784] [<ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10 [ 6293.256784] [<ffffffff812bd5a2>] SyS_read+0x62/0xa0 [ 6293.256784] [<ffffffff841a1a00>] tracesys+0xdd/0xe2 [ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c [ 6293.256784] RIP [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.256784] RSP <ffff880787ddfc28> [ 6293.256784] CR2: ffff8807c96f3000 [ 6293.256784] ---[ end trace 50822ee72cd360fc ]--- Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: in case of link failure remove route directly instead of letting it expireHannes Frederic Sowa
[ Upstream commit 1eb4f758286884e7566627164bca4c4a16952a83 ] We could end up expiring a route which is part of an ecmp route set. Doing so would invalidate the rt->rt6i_nsiblings calculations and could provoke the following panic: [ 80.144667] ------------[ cut here ]------------ [ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733! [ 80.145172] invalid opcode: 0000 [#1] SMP [ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables +snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk [ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118 [ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000 [ 80.145172] RIP: 0010:[<ffffffff815f3b5d>] [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP: 0018:ffff880118771798 EFLAGS: 00010202 [ 80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480 [ 80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738 [ 80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001 [ 80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680 [ 80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90 [ 80.145172] FS: 00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 [ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0 [ 80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 80.145172] Stack: [ 80.145172] 0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280 [ 80.145172] 0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa [ 80.145172] 0000000000000000 0000000000000000 0000000000000000 ffff88011350f680 [ 80.145172] Call Trace: [ 80.145172] [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90 [ 80.145172] [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70 [ 80.145172] [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40 [ 80.145172] [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0 [ 80.145172] [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30 [ 80.145172] [<ffffffff81616077>] fib6_rule_action+0xd7/0x210 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140 [ 80.145172] [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff815edea3>] ip6_route_output+0x73/0xb0 [ 80.145172] [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0 [ 80.145172] [<ffffffff813007b1>] ? list_del+0x11/0x40 [ 80.145172] [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50 [ 80.145172] [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0 [ 80.145172] [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20 [ 80.145172] [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0 [ 80.145172] [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30 [ 80.145172] [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0 [ 80.145172] [<ffffffff81524a68>] SYSC_sendto+0x128/0x180 [ 80.145172] [<ffffffff8109825c>] ? update_curr+0xec/0x170 [ 80.145172] [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10 [ 80.145172] [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0 [ 80.145172] [<ffffffff8152509e>] SyS_sendto+0xe/0x10 [ 80.145172] [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b [ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53 [ 80.145172] RIP [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP <ffff880118771798> [ 80.387413] ---[ end trace 02f20b7a8b81ed95 ]--- [ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: rt6_check_neigh should successfully verify neigh if no NUD information ↵Hannes Frederic Sowa
are available [ Upstream commit 3630d40067a21d4dfbadc6002bb469ce26ac5d52 ] After the removal of rt->n we do not create a neighbour entry at route insertion time (rt6_bind_neighbour is gone). As long as no neighbour is created because of "useful traffic" we skip this routing entry because rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and thus returns false. This change was introduced by commit 887c95cc1da53f66a5890fdeab13414613010097 ("ipv6: Complete neighbour entry removal from dst_entry.") To quote RFC4191: "If the host has no information about the router's reachability, then the host assumes the router is reachable." and also: "A host MUST NOT probe a router's reachability in the absence of useful traffic that the host would have sent to the router if it were reachable." So, just assume the router is reachable and let's rt6_probe do the rest. We don't need to create a neighbour on route insertion time. If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support) a neighbour is only valid if its nud_state is NUD_VALID. I did not find any references that we should probe the router on route insertion time via the other RFCs. So skip this route in that case. v2: a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov) Reported-by: Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_sizeHannes Frederic Sowa
[ Upstream commit 75a493e60ac4bbe2e977e7129d6d8cbb0dd236be ] If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track of this when appending the second frame on a corked socket. This results in the following splat: [37598.993962] ------------[ cut here ]------------ [37598.994008] kernel BUG at net/core/skbuff.c:2064! [37598.994008] invalid opcode: 0000 [#1] SMP [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video [37598.994008] CPU 0 [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202 [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0 [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00 [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040 [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8 [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000 [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0 [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0) [37598.994008] Stack: [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8 [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200 [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4 [37598.994008] Call Trace: [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0 [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0 [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40 [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10 [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90 [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0 [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30 [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0 [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180 [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0 [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240 [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2 [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48 [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP <ffff88003670da18> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]--- While there, also check if path mtu discovery is activated for this socket. The logic was adapted from ip6_append_data when first writing on the corked socket. This bug was introduced with commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec fragment"). v2: a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE. b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao feng, thanks!). c) Change mtu to unsigned int, else we get a warning about non-matching types because of the min()-macro type-check. Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET ↵Hannes Frederic Sowa
pending data [ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ] We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipip: fix a regression in ioctlCong Wang
[ Upstream commit 3b7b514f44bff05d26a6499c4d4fac2a83938e6e ] This is a regression introduced by commit fd58156e456d9f68fe0448 (IPIP: Use ip-tunneling code.) Similar to GRE tunnel, previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. Also, the check for i_key, o_key etc. is suspicious too, which did not exist before, reset them before passing to ip_tunnel_ioctl(). Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28l2tp: add missing .owner to struct pppox_protoWei Yongjun
[ Upstream commit e1558a93b61962710733dc8c11a2bc765607f1cd ] Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ip_tunnels: Use skb-len to PMTU check.Pravin B Shelar
[ Upstream commit 23a3647bc4f93bac3776c66dc2c7f7f68b3cd662 ] In path mtu check, ip header total length works for gre device but not for gre-tap device. Use skb len which is consistent for all tunneling types. This is old bug in gre. This also fixes mtu calculation bug introduced by commit c54419321455631079c7d (GRE: Refactor GRE tunneling code). Reported-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6,mcast: always hold idev->lock before mca_lockAmerigo Wang
[ Upstream commit 8965779d2c0e6ab246c82a405236b1fb2adae6b2, with some bits from commit b7b1bfce0bb68bd8f6e62a28295922785cc63781 ("ipv6: split duplicate address detection and router solicitation timer") to get the __ipv6_get_lladdr() used by this patch. ] dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vti: remove duplicated code to fix a memory leakCong Wang
[ Upstream commit ab6c7a0a43c2eaafa57583822b619b22637b49c7 ] vti module allocates dev->tstats twice: in vti_fb_tunnel_init() and in vti_tunnel_init(), this lead to a memory leak of dev->tstats. Just remove the duplicated operations in vti_fb_tunnel_init(). (candidate for -stable) Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28gre: fix a regression in ioctlCong Wang
[ Upstream commit 6c734fb8592f6768170e48e7102cb2f0a1bb9759 ] When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c54419321455631079c7d ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28x25: Fix broken locking in ioctl error paths.Dave Jones
[ Upstream commit 4ccb93ce7439b63c31bc7597bfffd13567fa483d ] Two of the x25 ioctl cases have error paths that break out of the function without unlocking the socket, leading to this warning: ================================================ [ BUG: lock held when returning to user space! ] 3.10.0-rc7+ #36 Not tainted ------------------------------------------------ trinity-child2/31407 is leaving the kernel with locks still held! 1 lock held by trinity-child2/31407: #0: (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25] Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28neighbour: fix a race in neigh_destroy()Eric Dumazet
[ Upstream commit c9ab4d85de222f3390c67aedc9c18a50e767531e ] There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock And hold neigh->lock in neigh_destroy() to close the race. Reported-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>