aboutsummaryrefslogtreecommitdiff
path: root/drivers/target/loopback
AgeCommit message (Collapse)Author
2012-11-06target: kill struct se_subsystem_devChristoph Hellwig
Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02tcm_loop: Convert I/O path to use target_submit_cmd_map_sglsNicholas Bellinger
This patch converts tcm_loop to use target_submit_cmd_map_sgls() for I/O submission and mapping of pre-allocated SGL memory from incoming scsi_cmnd -> se_cmd descriptors. This includes removing the original open-coded fabric uses of target core callers to support transport_generic_map_mem_to_cmd() between target_setup_cmd_from_cdb() and transport_handle_cdb_direct() logic. (v2: Use renamed target_submit_cmd_map_sgls) Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Simplify fabric sense data length handlingRoland Dreier
Every fabric driver has to supply a se_tfo->set_fabric_sense_len() method, just so iSCSI can return an offset of 2. However, every fabric driver is already allocating a sense buffer and passing it into the target core, either via transport_init_se_cmd() or target_submit_cmd(). So instead of having iSCSI pass the start of its sense buffer into the core and then later tell the core to skip the first 2 bytes, it seems easier for iSCSI just to do the offset of 2 when it passes the sense buffer into the core. Then we can drop the se_tfo->set_fabric_sense_len() everywhere, and just add a couple of lines of code to iSCSI to set the sense data length to the beginning of the buffer right before it sends it over the network. (nab: Remove .set_fabric_sense_len usage from tcm_qla2xxx_npiv_ops + change transport_get_sense_buffer to follow v3.6-rc6 code w/o ->set_fabric_sense_len usage) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Remove unused target_core_fabric_ops.get_fabric_sense_len methodRoland Dreier
There are no callers of se_tfo->get_fabric_sense_len(), so we should stop having every fabric driver implement it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: remove transport_generic_process_writeChristoph Hellwig
Just call target_execute_cmd directly. Also, convert loopback, sbp, usb-gadget to use the newly exported target_execute_cmd(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: remove control CDB flagsChristoph Hellwig
We don't need three flags to classifiy the CDB as we can check for a NULL S/G list for a dataless command, and can infer from the absence of the data flag that we deal with a control CDB. Also remove the _SG_IO from the data CDB flag as all I/O is dont on S/G lists now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14target: Rename target_allocate_tasks to target_setup_cmd_from_cdbAndy Grover
This patch renames a horribly misnamed function that no longer allocate tasks to something more descriptive for it's modern use in target core. (nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd conversion) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-17loopback: Fix transport_generic_allocate_tasks error handlingNicholas Bellinger
This patch addresses a tcm_loop bug with transport_generic_allocate_tasks() return checking in tcm_loop_submission_work() where other non zero return codes (including -EBUSY for reservation conflicts) are incorrectly falling through to transport_generic_map_mem_to_cmd() -> transport_handle_cdb_direct(). This bug was introduced into target-pending/for-next-merge with the following for-3.4 commit: commit 16786454acec0e0e55e32d508b3058b32c1f23f3 Author: Christoph Hellwig <hch@infradead.org> Date: Thu Feb 2 17:04:42 2012 -0500 tcm_loop: switch to using transport_handle_cdb_direct Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15target: remove obvious warningsJörn Engel
Get rid of a bunch of write-only variables. In a number of cases I suspect actual bugs to be present, so I left all of those for a second look. (nab: fix lio-core patch fuzz) Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Bump core version to v4.1.0-rc2-ml + fabric versionsNicholas Bellinger
Bump core version to v4.1.0-rc2-ml, and for versions from the following mainline fabric modules: loopback: v2.1-rc2 tcm_fc: v0.4 iscsi-target: v4.1.0-rc2 Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10target: Drop unused legacy target_core_fabric_ops API callersNicholas Bellinger
This patch drops the following unused legacy API callers from target_core_fabric.h: *) TFO->fall_back_to_erl0() *) TFO->stop_session() *) TFO->sess_logged_in() *) TFO->is_state_remove() This patch also removes the stub usage in loopback, tcm_fc, iscsi_target, and ib_srpt fabric modules. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: Set residual field for SCSI commandsRoland Dreier
If the target core signals an over- or under-run, tcm_loop should call scsi_set_resid() to tell the SCSI midlayer about the residual data length. The difference can be seen by doing something like strace -eioctl sg_raw -r 1024 /dev/sda 8 0 0 0 1 0 > /dev/null and looking at the "resid=" part of the SG_IO ioctl -- after this patch, the field is correctly reported as 512. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: switch to using transport_handle_cdb_directChristoph Hellwig
Now that we use a workqueue for I/O submission there is no need to use transport_generic_handle_cdb_map any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: defer all command submissions to workqueueChristoph Hellwig
Apply the qla2xxx model of submitting all commands from a workqueue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25tcm_loop: kill tcm_loop_allocate_core_cmdChristoph Hellwig
This function makes little sense as a separate abstraction as it's deeply interwinded with the control flow of its only caller. Merged it into tcm_loop_queuecommand after factoring out a helper to convert the task attribute representation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cacheAndy Grover
Change the test for if a cmd is a tmr request to checking if SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags. Also remove se_tmr_req_cache usage in favor of kzalloc usage, and make core_tmr_alloc_req() return int + setup se_cmd->se_tmr_req directly and fix up various fabric module usages Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14tcm_loop: bump max_sectorsChristoph Hellwig
There is not reason to artifically limit max_sectors in tcm_loop, set it to UINT_MAX to allow stressing the large I/O handling in the target core using the loopback driver. Also remove various superflous defines hiding the values set in the host template. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: remove useless castsJörn Engel
A reader should spend an extra moment whenever noticing a cast, because either something special is going on that deserves extra attention or, as is all too often the case, the code is wrong. These casts, afaics, have all been useless. They cast a foo* to a foo*, cast a void* to the assigned type, cast a foo* to void*, before assigning it to a void* variable, etc. In a few cases I also removed an additional &...[0], which is equally useless. Lastly I added three FIXMEs where, to the best of my judgement, the code appears to have a bug. It would be good if someone could check these. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: header reshuffle, part2Christoph Hellwig
This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the t_tasks_bidi se_cmd fieldChristoph Hellwig
And use a SCF_BIDI flag instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Drop config_item_name usage in fabric TFO->free_wwn()Nicholas Bellinger
This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Address legacy PYX_TRANSPORT_* return code breakageNicholas Bellinger
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-02target: Make TFO->check_stop_free return free statusNicholas Bellinger
This patch converts target_core_fabric_ops->check_stop_free() usage in transport_cmd_check_stop() and associated fabric module usage to return '1' when the passed se_cmd has been released directly within ->check_stop_free(), or return '0' when the passed se_cmd has not been released. This addresses an issue where transport_cmd_finish_abort() -> transport_cmd_check_stop_to_fabric() was leaking descriptors during LUN_RESET for modules using ->check_stop_free(), but not directly releasing se_cmd in all cases. Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-10-26tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDBNicholas Bellinger
This patch addresses an issue with buggy userspace code sending I/O via scsi-generic that does not explictly clear their associated read buffers. It adds an explict memset of the first SGL entry within tcm_loop_new_cmd_map() for SCF_SCSI_CONTROL_SG_IO_CDB payloads that are currently guaranteed to be a single SGL by target-core code. This issue is a side effect of the v3.1-rc1 merge to remove the extra memcpy between certain control CDB types using a contigious + cleared buffer in target-core, and performing a memcpy into the SGL list within tcm_loop. It was originally mainfesting itself by udev + scsi_id + scsi-generic not properly setting up the expected /dev/disk/by-id/ symlinks because the INQUIRY payload was containing extra bogus data preventing the proper NAA IEEE WWN from being parsed by userspace. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24loopback: Prevent uninitialized use of tl_tpg in tcm_loop_queuecommandNicholas Bellinger
This patch fixes a bug with tcm_loop where performing a scsi_host rescan was causing an oops due to a received scsi_cmnd->device->id value not matching a previously configured tcm_loop_tpg entry in tcm_loop_hba->tl_hba_tpgs[] obtained from within tcm_loop_queuecommand() code. This fix adds an explict check for tcm_loop_tpg->tl_hba in order to ensure tcm_loop_make_naa_tpg() has already been invoked to initialize a given tcm_loop_tpg entry, and also adds an explict clear of tcm_loop_tpg->tl_hba from within the tcm_loop_drop_naa_tpg() release path. This bug was manifesting itself with the following OOPs: [176289.430909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 [176289.431337] IP: [<ffffffffa0395617>] transport_processing_thread+0x1e3/0x794 [target_core_mod] [176289.431399] PGD 22e9b067 PUD 23375067 PMD 0 [176289.431399] Oops: 0000 [#1] SMP [176289.431815] CPU 1 [176289.431815] Modules linked in: tcm_loop target_core_stgt target_core_pscsi target_core_file target_core_iblock target_core_mod crc32c ib_cm ib_sa ib_mad ib_core qla2xxx scsi_tgt configfs fcoe libfcoe libfc scsi_transport_fc ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod ata_piix libata e1000 mptspi mptscsih mptbase [last unloaded: target_core_mod] [176289.431815] [176289.431815] Pid: 12339, comm: LIO_iblock Tainted: G W 3.1.0-rc8+ [176289.431815] RIP: 0010:[<ffffffffa0395617>] [<ffffffffa0395617>] transport_processing_thread+0x1e3/0x794 [target_core_mod] [176289.431815] RSP: 0018:ffff880023bfbe10 EFLAGS: 00010283 [176289.431815] RAX: 0000000000000000 RBX: ffff88002d600040 RCX: ffff88002d600108 [176289.431815] RDX: ffff88000c9e50bc RSI: 0000000000000246 RDI: 0000000000000246 [176289.431815] RBP: ffff880023bfbee0 R08: ffff88002d600108 R09: 0000000000000000 [176289.431815] R10: ffff88002fc8cc80 R11: ffffffff81671b60 R12: ffff88002d600108 [176289.431815] R13: ffff88000c9e4f38 R14: ffff88000c9e50b8 R15: 0000000000000000 [176289.431815] FS: 0000000000000000(0000) GS:ffff88002fc80000(0000) knlGS:0000000000000000 [176289.431815] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [176289.431815] CR2: 0000000000000090 CR3: 000000002a33f000 CR4: 00000000000006e0 [176289.431815] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [176289.431815] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [176289.431815] Process LIO_iblock (pid: 12339, threadinfo ffff880023bfa000, task ffff88002a2e0000) [176289.431815] Stack: [176289.431815] 0000000000011280 0000000000000246 ffff88002a2e0000 ffff880023a58900 [176289.431815] ffff880023bfbed0 ffff880023bfa000 ffff880023bfa000 ffff88000c9e50d0 [176289.431815] ffff88000c9e50c0 ffff88000c9e50bc ffff880023bfa000 ffff880023bfbfd8 [176289.431815] Call Trace: [176289.431815] [<ffffffff81056657>] ? wake_up_bit+0x25/0x25 [176289.431815] [<ffffffffa0395434>] ? transport_handle_cdb_direct+0x92/0x92 [target_core_mod] [176289.431815] [<ffffffff8105619a>] kthread+0x7d/0x85 [176289.431815] [<ffffffff813cbcb4>] kernel_thread_helper+0x4/0x10 [176289.431815] [<ffffffff8105611d>] ? kthread_worker_fn+0x16d/0x16d [176289.431815] [<ffffffff813cbcb0>] ? gs_change+0x13/0x13 [176289.431815] Code: 67 05 00 00 41 8b 84 24 4c ff ff ff ff c8 83 f8 11 0f 87 f0 04 00 00 89 c0 ff 24 c5 b0 c6 39 a0 0f 0b eb fe 48 8b 83 d8 00 00 00 [176289.431815] RIP [<ffffffffa0395617>] transport_processing_thread+0x1e3/0x794 [target_core_mod] [176289.431815] RSP <ffff880023bfbe10> [176289.431815] CR2: 0000000000000090 [176295.041004] ---[ end trace 85dc6865b23b8f3e ]--- Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: Have core_tmr_alloc_req() take an explicit GFP_xxx flagRoland Dreier
Testing in_interrupt() to know when sleeping is allowed is not really reliable (since eg it won't be true if the caller is holding a spinlock). Instead have the caller tell core_tmr_alloc_req() what GFP_xxx to use; every caller except tcm_qla2xxx can use GFP_KERNEL. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: push session reinstatement out of transport_generic_free_cmdChristoph Hellwig
Push session reinstatement out of transport_generic_free_cmd into the only caller that actually needs it. Clean up transport_generic_free_cmd a bit, and remove the useless comment. I'd love to add a more useful kerneldoc comment for it, but as this point I'm still a bit confused in where it stands in the command release stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Follow up core updates from AGrover and HCH (round 4)Andy Grover
This patch contains the squashed version of forth round series cleanups from Andy and Christoph following the post heavy lifting in the preceeding: 'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather' changes. This also includes a conversion of target core and the v3.0 mainline fabric modules (loopback and tcm_fc) to use pr_debug and the CONFIG_DYNAMIC_DEBUG infrastructure! These have been squashed into this third and final round for v3.1. target: Remove ifdeffed code in t_g_process_write target: Remove direct ramdisk code target: Rename task_sg_num to task_sg_nents target: Remove custom debug macros for pr_debug. Use pr_err(). target: Remove custom debug macros in mainline fabrics target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0 target: Remove transport do_se_mem_map callback target: Further simplify transport_free_pages target: Redo task allocation return value handling target: Remove extra parentheses target: change alloc_task call to take *cdb, not *cmd (nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Eliminate usage of struct se_memAndy Grover
Both backstores and fabrics use arrays of struct scatterlist to describe data buffers. However TCM used struct se_mems, basically a linked list of scatterlist entries. We are able to simplify the code by eliminating this intermediate data structure and just using struct scatterlist[] throughout. Also, moved attachment of task to cmd out of transport_generic_get_task and into allocate_control_task and allocate_data_tasks. The reasoning is that it's nonintuitive that get_task should automatically add it to the cmd's task list -- it should just return an allocated, initialized task. That's all it should do, based on the function's name, so either the function shouldn't do it, or the name should change to encapsulate the entire essence of what it does. (nab: Fix compile warnings in tcm_fc, and make transport_kmap_first_data_page honor sg->offset for SGLs from contigious memory with TCM_Loop, and fix control se_cmd descriptor memory leak) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22loopback: Fix memory leak in tcm_loop_make_scsi_hba()Jesper Juhl
There is a memory leak in tcm_loop_make_scsi_hba(). If all the strstr() calls return NULL and we end up at return ERR_PTR(-EINVAL); then we'll be leaking the memory previously allocated to tl_hba as that variable goes out of scope. This patch should fix the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22loopback: Remove duplicate scsi/scsi_tcq.h includeJesper Juhl
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22loopback: off by one in tcm_loop_make_naa_tpg()Dan Carpenter
This is an off by one 'tgpt' check in tcm_loop_make_naa_tpg() that could result in memory corruption. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-22target: merge release_cmd methodsChristoph Hellwig
The release_cmd_to_pool and release_cmd_direct methods are always the same. Merge them into a single release_cmd method, and clean up the fallout. (nab: fix breakage in transport_generic_free_cmd() parameter build breakage in drivers/target/tcm_fc/tfc_cmd.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: remove the always-noop ->new_cmd_failure methodChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Updates from AGrover and HCH (round 3)Andy Grover
This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: More core cleanups from AGrover (round 2)Andy Grover
This patch contains the squashed version of second round of target core cleanups and simplifications and Andy and Co. It also contains a handful of fixes to address bugs the original series and other minor cleanups. Here is the condensed shortlog: target: Remove unneeded casts to void* target: Rename get_lun_for_{cmd,tmr} to lookup_{cmd,tmr}_lun target: Make t_task a member of se_cmd, not a pointer target: Handle functions returning "-2" target: Use cmd->se_dev over cmd->se_lun->lun_se_dev target: Embed qr in struct se_cmd target: Replace embedded struct se_queue_req with a list_head target: Rename list_heads that are nodes in struct se_cmd to "*_node" target: Fold transport_device_setup_cmd() into lookup_{tmr,cmd}_lun() target: Make t_mem_list and t_mem_list_bidi members of t_task target: Add comment & cleanup transport_map_sg_to_mem() target: Remove unneeded checks in transport_free_pages() (Roland: Fix se_queue_req removal leftovers OOPs) (nab: Fix transport_lookup_tmr_lun failure case) (nab: Fix list_empty(&cmd->t_task.t_mem_bidi_list) inversion bugs) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Core cleanups from AGrover (round 1)Andy Grover
This patch contains the squashed version of a number of cleanups and minor fixes from Andy's initial series (round 1) for target core this past spring. The condensed log looks like: target: use errno values instead of returning -1 for everything target: Rename transport_calc_sg_num to transport_init_task_sg target: Fix leak in error path in transport_init_task_sg target/pscsi: Remove pscsi_get_sh() usage target: Make two runtime checks into WARN_ONs target: Remove hba queue depth and convert to spin_lock_irq usage target: dev->dev_status_queue_obj is unused target: Make struct se_queue_req.cmd type struct se_cmd * target: Remove __transport_get_qr_from_queue() target: Rename se_dev->g_se_dev_list to se_dev_node target: Remove struct se_global target: Simplify scsi mib index table code target: Make dev_queue_obj a member of se_device instead of a pointer target: remove extraneous returns at end of void functions target: Ensure transport_dump_vpd_ident_type returns null-terminated str target: Function pointers don't need to use '&' to be assigned target: Fix comment in __transport_execute_tasks() target: Misc style cleanups target: rename struct pr_reservation_template to pr_reservation target: Remove #defines that just perform indirection target: Inline transport_get_task_from_execute_queue() target: Minor header comment fixes Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Remove unnecessary *cdb transport_get_lun_for_cmd parameterNicholas Bellinger
This patch removes the now unnecessary 'unsigned char *cdb' function parameter from transport_get_lun_for_cmd(). This also includes updating lio-target, tcm_loop and tcm_fc usage of transport_get_lun_for_cmd(). Reported-by: Fubo Chen <fubo.chen@gmail.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-06-24target: Fix incorrect strlen() NULL terminator checksDan Carpenter
This patch fixes a number of cases in target core using an incorrectly if (strlen(foo) > SOME_MAX_SIZE) As strlen() returns the number of characters in the string not counting the NULL character at the end. So if you do something like: char buf[10]; if (strlen("0123456789") > 10) return -ETOOLONG; snprintf(buf, 10, "0123456789"); printf("%s\n", buf); then the last "9" gets chopped off and only "012345678" is printed. Plus I threw in one small related cleanup. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-24target: Fix ERR_PTR dereferencing bugsDan Carpenter
transport_init_session() and core_tmr_alloc_req() never return NULL, they only return ERR_PTRs on error. v2: Fix patch to return PTR_ERR(tl_nexus->se_sess) from Ankit Jain's feedback. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ankit Jain <jankit@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-27[SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitionsNicholas Bellinger
This patch converts target core and follwing scsi-misc upstream fabric modules to use include/scsi/scsi_tcq.h includes for SIMPLE, HEAD_OF_QUEUE and ORDERED SCSI tasks instead of scsi/libsas.h with TASK_ATTR* *) tcm_loop: Convert tcm_loop_allocate_core_cmd() + tcm_loop_device_reset() to scsi_tcq.h *) tcm_fc: Convert ft_send_cmd() from FCP_PTA_* to scsi_tcq.h Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-27[SCSI] target: Convert REPORT_LUNs to use int_to_scsilunNicholas Bellinger
This patch converts transport_core_report_lun_response() to use drivers/scsi/scsi_scan.c:int_to_scsilun instead of using the struct target_core_fabric_ops->pack_lun() fabric provided API vector. It also removes the tfo->pack_lun check from target_fabric_tf_ops_check() and removes from struct target_core_fabric_ops->pack_lun() from target_core_fabric_ops.h, and the following mainline scsi-misc fabric modules: *) tcm_loop: Drop tcm_loop_pack_lun() usage *) tcm_fc: Drop ft_pack_lun() usage Reported-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-03-23[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric moduleNicholas Bellinger
This patch adds the TCM_Loop Linux/SCSI LLD fabric module for accessing TCM device backstores as locally accessable SCSI LUNs in virtual SAS, FC, and iSCSI Target ports using the generic fabric TransportID and Target Port WWN naming handlers from TCM's target_core_fabric_lib.c The TCM_Loop module uses the generic fabric configfs infratructure provided by target_core_fabric_configfs.c and adds a module dependent attribute for the creation/release of the virtual I_T Nexus connected the TCM_Loop Target and Initiator Ports. TCM_Loop can also be used with scsi-generic and BSG drivers so that STGT userspace fabric modules, QEMU-KVM and other hypervisor SCSI passthrough support can access TCM device backstore and control CDB emulation. For more information please see: http://linux-iscsi.org/wiki/Tcm_loop [jejb: fixed up checkpatch stuff] Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>