path: root/arch/powerpc
AgeCommit message (Collapse)Author
2013-06-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc bugfix from Ben Herrenschmidt: "This is a fix for a regression causing a freescale "83xx" based platforms to crash on boot due to some PCI breakage" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Fix boot panic on mpc83xx (regression)
2013-06-24powerpc/pci: Fix boot panic on mpc83xx (regression)Rojhalat Ibrahim
The following commit caused a fatal oops when booting on mpc83xx with a non-express PCI bus (regardless of whether a PCI device is present): commit 50d8f87d2b39313dae9d0a2d9b23d377328f2f7b Author: Rojhalat Ibrahim <imr@rtschenk.de> Date: Mon Apr 8 10:15:28 2013 +0200 powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllers Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> This patch fixes the issue by calling setup_indirect_pci for all device types. fsl_indirect_read_config is now only used for booke/86xx PCIe controllers. Reported-by: Michael Guntsche <mike@it-loops.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Three one-line fixes for my first pull request; one for x86 host, one for x86 guest, one for PPC" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86: kvmclock: zero initialize pvclock shared memory area kvm/ppc/booke: Delay kvmppc_lazy_ee_enable KVM: x86: remove vcpu's CPL check in host-invoked XCR set
2013-06-20powerpc: Fix bad pmd error with book3E configAneesh Kumar K.V
Book3E uses the hugepd at PMD level and don't encode pte directly at the pmd level. So it will find the lower bits of pmd set and the pmd_bad check throws error. Infact the current code will never take the free_hugepd_range call at all because it will clear the pmd if it find a hugepd pointer. Fix this by clearing bad pmd only if it is not a hugepd pointer. This is regression introduced by e2b3d202d1dba8f3546ed28224ce485bc50010be "powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format" Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-19kvm/ppc/booke: Delay kvmppc_lazy_ee_enableScott Wood
kwmppc_lazy_ee_enable() should be called as late as possible, or else we get things like WARN_ON(preemptible()) in enable_kernel_fp() in configurations where preemptible() works. Note that book3s_pr already waits until just before __kvmppc_vcpu_run to call kvmppc_lazy_ee_enable(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "So here are 3 fixes still for 3.10. Fixes are simple, bugs are nasty (though not recent regressions, nasty enough) and all targeted at stable" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix missing/delayed calls to irq_work powerpc: Fix emulation of illegal instructions on PowerNV platform powerpc: Fix stack overflow crash in resume_kernel when ftracing
2013-06-15powerpc: Fix missing/delayed calls to irq_workBenjamin Herrenschmidt
When replaying interrupts (as a result of the interrupt occurring while soft-disabled), in the case of the decrementer, we are exclusively testing for a pending timer target. However we also use decrementer interrupts to trigger the new "irq_work", which in this case would be missed. This change the logic to force a replay in both cases of a timer boundary reached and a decrementer interrupt having actually occurred while disabled. The former test is still useful to catch cases where a CPU having been hard-disabled for a long time completely misses the interrupt due to a decrementer rollover. CC: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-15powerpc: Fix emulation of illegal instructions on PowerNV platformPaul Mackerras
Normally, the kernel emulates a few instructions that are unimplemented on some processors (e.g. the old dcba instruction), or privileged (e.g. mfpvr). The emulation of unimplemented instructions is currently not working on the PowerNV platform. The reason is that on these machines, unimplemented and illegal instructions cause a hypervisor emulation assist interrupt, rather than a program interrupt as on older CPUs. Our vector for the emulation assist interrupt just calls program_check_exception() directly, without setting the bit in SRR1 that indicates an illegal instruction interrupt. This fixes it by making the emulation assist interrupt set that bit before calling program_check_interrupt(). With this, old programs that use no-longer implemented instructions such as dcba now work again. CC: <stable@vger.kernel.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-15powerpc: Fix stack overflow crash in resume_kernel when ftracingMichael Ellerman
It's possible for us to crash when running with ftrace enabled, eg: Bad kernel stack pointer bffffd12 at c00000000000a454 cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40] pc: c00000000000a454: resume_kernel+0x34/0x60 lr: c00000000000335c: performance_monitor_common+0x15c/0x180 sp: bffffd12 msr: 8000000000001032 dar: bffffd12 dsisr: 42000000 If we look at current's stack (paca->__current->stack) we see it is equal to c0000002ecab0000. Our stack is 16K, and comparing to paca->kstack (c0000002ecab3e30) we can see that we have overflowed our kernel stack. This leads to us writing over our struct thread_info, and in this case we have corrupted thread_info->flags and set _TIF_EMULATE_STACK_STORE. Dumping the stack we see: 3:mon> t c0000002ecab0000 [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70 [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180 --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30 [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable) [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90 [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34 [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300 [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable) [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280 [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40 [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 ... and so on __ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry path. At that point the irq state is not consistent, ie. interrupts are hard disabled (by the exception entry), but the paca soft-enabled flag may be out of sync. This leads to the local_irq_restore() in trace_graph_entry() actually enabling interrupts, which we do not want. Because we have not yet reprogrammed the decrementer we immediately take another decrementer exception, and recurse. The fix is twofold. Firstly make sure we call DISABLE_INTS before calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles the irq state in the paca with the hardware, making it safe again to call local_irq_save/restore(). Although that should be sufficient to fix the bug, we also mark the runlatch routines as notrace. They are called very early in the exception entry and we are asking for trouble tracing them. They are also fairly uninteresting and tracing them just adds unnecessary overhead. [ This regression was introduced by fe1952fc0afb9a2e4c79f103c08aef5d13db1873 "powerpc: Rework runlatch code" by myself --BenH ] CC: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-11Merge branch 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm bugfixes from Gleb Natapov: "There is one more fix for MIPS KVM ABI here, MIPS and PPC build breakage fixes and a couple of PPC bug fixes" * 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm/ppc/booke64: Fix lazy ee handling in kvmppc_handle_exit() kvm/ppc/booke: Hold srcu lock when calling gfn functions kvm/ppc/booke64: Disable e6500 support kvm/ppc/booke64: Fix AltiVec interrupt numbers and build breakage mips/kvm: Use KVM_REG_MIPS and proper size indicators for *_ONE_REG kvm: Add definition of KVM_REG_MIPS KVM: add kvm_para_available to asm-generic/kvm_para.h
2013-06-11kvm/ppc/booke64: Fix lazy ee handling in kvmppc_handle_exit()Scott Wood
EE is hard-disabled on entry to kvmppc_handle_exit(), so call hard_irq_disable() so that PACA_IRQ_HARD_DIS is set, and soft_enabled is unset. Without this, we get warnings such as arch/powerpc/kernel/time.c:300, and sometimes host kernel hangs. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-11kvm/ppc/booke: Hold srcu lock when calling gfn functionsScott Wood
KVM core expects arch code to acquire the srcu lock when calling gfn_to_memslot and similar functions. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-11kvm/ppc/booke64: Disable e6500 supportScott Wood
The previous patch made 64-bit booke KVM build again, but Altivec support is still not complete, and we can't prevent the guest from turning on Altivec (which can corrupt host state until state save/restore is implemented). Disable e6500 on KVM until this is fixed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-11kvm/ppc/booke64: Fix AltiVec interrupt numbers and build breakageMihai Caraman
Interrupt numbers defined for Book3E follows IVORs definition. Align BOOKE_INTERRUPT_ALTIVEC_UNAVAIL and BOOKE_INTERRUPT_ALTIVEC_ASSIST to this rule which also fixes the build breakage. IVORs 32 and 33 are shared so reflect this in the interrupts naming. This fixes a build break for 64-bit booke KVM. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-10powerpc: Partial revert of "Context switch more PMU related SPRs"Michael Ellerman
In commit 59affcd I added context switching of more PMU SPRs, because they are potentially exposed to userspace on Power8. However despite me being a smart arse in the commit message it's actually not correct. In particular it interacts badly with a global perf record. We will have to do something more complicated, but that will have to wait for 3.11. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/perf: Fix deadlock caused by calling printk() in PMU exceptionMichael Ellerman
In commit bc09c21 "Fix finding overflowed PMC in interrupt" we added a printk() to the PMU exception handler. Unfortunately that is not safe. The problem is that the PMU exception may run even when interrupts are soft disabled, aka NMI context. We do this so that we can profile parts of the kernel that have interrupts soft-disabled. But by calling printk() from the exception handler, we can potentially deadlock in the printk code on logbuf_lock, eg: [c00000038ba575c0] c000000000081928 .vprintk_emit+0xa8/0x540 [c00000038ba576a0] c0000000007bcde8 .printk+0x48/0x58 [c00000038ba57710] c000000000076504 .perf_event_interrupt+0x2d4/0x490 [c00000038ba57810] c00000000001f6f8 .performance_monitor_exception+0x48/0x60 [c00000038ba57880] c0000000000032cc performance_monitor_common+0x14c/0x180 --- Exception: f01 (Performance Monitor) at c0000000007b25d4 ._raw_spin_lock_irq +0x64/0xc0 [c00000038ba57bf0] c00000000007ed90 .devkmsg_read+0xd0/0x5a0 [c00000038ba57d00] c0000000001c2934 .vfs_read+0xc4/0x1e0 [c00000038ba57d90] c0000000001c2cd8 .SyS_read+0x58/0xd0 [c00000038ba57e30] c000000000009d54 syscall_exit+0x0/0x98 --- Exception: c01 (System Call) at 00001fffffbf6f7c SP (3ffff6d4de10) is in userspace Fix it by making sure we only call printk() when we are not in NMI context. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Cc: <stable@vger.kernel.org> # 3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/hw_breakpoints: Add DABRX cpu feature to fix 32-bit regressionMichael Neuling
When introducing support for DABRX in 4474ef0, we broke older 32-bit CPUs that don't have that register. Some CPUs have a DABR but not DABRX. Configuration are: - No 32bit CPUs have DABRX but some have DABR. - POWER4+ and below have the DABR but no DABRX. - 970 and POWER5 and above have DABR and DABRX. - POWER8 has DAWR, hence no DABRX. This introduces CPU_FTR_DABRX and sets it on appropriate CPUs. We use the top 64 bits for CPU FTR bits since only 64 bit CPUs have this. Processors that don't have the DABRX will still work as they will fall back to software filtering these breakpoints via perf_exclude_event(). Signed-off-by: Michael Neuling <mikey@neuling.org> Reported-by: "Gorelik, Jacob (335F)" <jacob.gorelik@jpl.nasa.gov> cc: stable@vger.kernel.org (v3.9 only) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/power8: Update denormalization handlerMichael Neuling
POWER8 can take a denormalisation exception on any VSX registers. This does the extra 32 VSX registers we don't currently handle. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/pseries: Simplify denormalization handlerMichael Neuling
The following simplifies the denorm code by using macros to generate the long stream of almost identical instructions. This patch results in no changes to the output binary, but removes a lot of lines of code. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/power8: Fix oprofile and perfMichael Neuling
In 2ac6f42 powerpc/cputable: Fix oprofile_cpu_type on power8 we broke all power8 hw events. This reverts this change and uses oprofile_type instead. Perf now works on POWER8 again and oprofile will revert to using timers on POWER8. Kudos to mpe this fix. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/eeh: Don't check RTAS token to get PE addrGavin Shan
RTAS token "ibm,get-config-addr-info" or ibm,get-config-addr-info2" are used to retrieve the PE address according to PCI address, which made up of domain/bus/slot/function. If we don't have those 2 tokens, the domain/bus/slot/function would be used as the address for EEH RTAS operations. Some older f/w might not have those 2 tokens and that blocks the EEH functionality to be initialized. It was introduced by commit e2af155c ("powerpc/eeh: pseries platform EEH initialization"). The patch skips the check on those 2 tokens so we can bring up EEH functionality successfully. And domain/bus/slot/function will be used as address for EEH RTAS operations. Cc: <stable@vger.kernel.org> # v3.4+ Reported-by: Robert Knight <knight@princeton.edu> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Tested-by: Robert Knight <knight@princeton.edu> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-10powerpc/pci: Check the bus address instead of resource address in ↵Kevin Hao
pcibios_fixup_resources If a BAR has the value of 0, we would assume that it is unset yet and then mark the resource as unset and would reassign it later. But after commit 6c5705fe (powerpc/PCI: get rid of device resource fixups) the pcibios_fixup_resources is invoked after the bus address was translated to linux resource. So the value of res->start is resource address. And since the resource and bus address may be different, we should translate it to the bus address before doing the check. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/cputable: Fix typo on P7+ cputable entryWill Schmidt
Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/perf: Add missing SIER supportMichael Ellerman
Commit 8f61aa3 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/perf: Revert to original NO_SIPR logicMichael Ellerman
This is a revert and then some of commit 860aad7 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/pci: Remove the unused variables in pci_process_bridge_OF_rangesKevin Hao
The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/pci: Remove the stale comments of pci_process_bridge_OF_rangesKevin Hao
These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMPSrivatsa S. Bhat
Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulationPaul Mackerras
This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/32bit:Store temporary result in r0 instead of r8Priyanka Jain
Commit a9c4e541ea9b22944da356f2a9258b4eddcc953b "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> CC: <stable@vger.kernel.org> [v3.7+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/mm: Always invalidate tlb on hpte invalidate and updateAneesh Kumar K.V
If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbd293564de91596b8775340cf41ad5214c Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/pseries: Improve stream generation comments in copypage/userMichael Neuling
No code changes, just documenting what's happening a little better. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/pseries: Kill all prefetch streams on context switchMichael Neuling
On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/cputable: Fix oprofile_cpu_type on power8Nishanth Aravamudan
Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPUchenhui zhao
For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/tm: Fix userspace stack corruption on signal delivery for active ↵Michael Neuling
transactions When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/tm: Move TM abort cause codes to uapiMichael Neuling
These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/tm: Abort on emulation and alignment faultsMichael Neuling
If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.c Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-01powerpc/tm: Make room for hypervisor in abort cause codesMichael Neuling
PAPR carves out 0xff-0xe0 for hypervisor use of transactional memory software abort cause codes. Unfortunately we don't respect this currently. Below fixes this to move our cause codes to below this region. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # 3.9 only Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Some more P8 related bits, a bunch of fixes for our P7+/P8 HW crypto drivers, some added workarounds for those radeons that don't do proper 64-bit MSIs and a couple of other trivialities by myself." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support powerpc/powernv: Build a zImage.epapr powerpc: Make radeon 32-bit MSI quirk work on powernv powerpc: Context switch more PMU related SPRs powerpc/powernv: Fix condition for when to invalidate the TCE cache powerpc/pci: Fix bogus message at boot about empty memory resources powerpc: Fix TLB cleanup at boot on POWER8 drivers/crypto/nx: Fixes for multiple races and issues
2013-05-24powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware supportBrian King
Recent commit e61133dda480062d221f09e4fc18f66763f8ecd0 added support for a new firmware feature to force an adapter to use 32 bit MSIs. However, this firmware is not available for all systems. The hack below allows devices needing 32 bit MSIs to work on these systems as well. It is careful to only enable this on Gen2 slots, which should limit this to configurations where this hack is needed and tested to work. [Small change to factor out the hack into a separate function -- BenH] Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc/powernv: Build a zImage.epaprBenjamin Herrenschmidt
The zImage.epapr wrapper allows to use zImages when booting via a flat device-tree which can be used on powernv. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc: Make radeon 32-bit MSI quirk work on powernvBenjamin Herrenschmidt
This moves the quirk itself to pci_64.c as to get built on all ppc64 platforms (the only ones with a pci_dn), factors the two implementations of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit MSIs on IODA based powernv platforms. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc: Context switch more PMU related SPRsMichael Ellerman
In commit 9353374 "Context switch the new EBB SPRs" we added support for context switching some new EBB SPRs. However despite four of us signing off on that patch we missed some. To be fair these are not actually new SPRs, but they are now potentially user accessible so need to be context switched. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc/powernv: Fix condition for when to invalidate the TCE cacheBenjamin Herrenschmidt
We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc/pci: Fix bogus message at boot about empty memory resourcesBenjamin Herrenschmidt
The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24powerpc: Fix TLB cleanup at boot on POWER8Benjamin Herrenschmidt
The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-23Merge tag 'usb-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
2013-05-15USB: remove remaining instances of USB_SUSPENDAlan Stern
Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-14Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "This is mostly bug fixes (some of them regressions, some of them I deemed worth merging now) along with some patches from Li Zhong hooking up the new context tracking stuff (for the new full NO_HZ)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Set show_unhandled_signals to 1 by default powerpc/perf: Fix setting of "to" addresses for BHRB powerpc/pmu: Fix order of interpreting BHRB target entries powerpc/perf: Move BHRB code into CONFIG_PPC64 region powerpc: select HAVE_CONTEXT_TRACKING for pSeries powerpc: Use the new schedule_user API on userspace preemption powerpc: Exit user context on notify resume powerpc: Exception hooks for context tracking subsystem powerpc: Syscall hooks for context tracking subsystem powerpc/booke64: Fix kernel hangs at kernel_dbg_exc powerpc: Fix irq_set_affinity() return values powerpc: Provide __bswapdi2 powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3 powerpc/powernv: Detect OPAL v3 API version powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS powerpc: Bring all threads online prior to migration/hibernation powerpc/rtas_flash: Fix validate_flash buffer overflow issue powerpc/kexec: Fix kexec when using VMX optimised memcpy powerpc: Fix build errors STRICT_MM_TYPECHECKS ...