path: root/fs
AgeCommit message (Collapse)Author
2008-01-30dlm: static initialization improvementsDenis Cheng
also change name_prefix from char pointer to char array. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: clean upsDavid Teigland
A couple small clean-ups. Remove unnecessary wrapper-functions in rcom.c, and remove unnecessary casting and an unnecessary ASSERT in util.c. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: Sanity check namelen before copying itPatrick Caulfeld
The 32/64 compatibility code in the DLM does not check the validity of the lock name length passed into it, so it can easily overwrite memory if the value is rubbish (as early versions of libdlm can cause with unlock calls, it doesn't zero the field). This patch restricts the length of the name to the amount of data actually passed into the call. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: keep cached master rsbs during recoveryDavid Teigland
To prevent the master of an rsb from changing rapidly, an unused rsb is kept on the "toss list" for a period of time to be reused. The toss list was being cleared completely for each recovery, which is unnecessary. Much of the benefit of the toss list can be maintained if nodes keep rsb's in their toss list that they are the master of. These rsb's need to be included when the resource directory is rebuilt during recovery. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: change error message to debugDavid Teigland
The invalid lockspace messages are normal and can appear relatively often. They should be suppressed without debugging enabled. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: fix possible use-after-freeDavid Teigland
The dlm_put_lkb() can free the lkb and its associated ua structure, so we can't depend on using the ua struct after the put. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: limit dir lookup loopDavid Teigland
In a rare case we may need to repeat a local resource directory lookup due to a race with removing the rsb and removing the resdir record. We'll never need to do more than a single additional lookup, though, so the infinite loop around the lookup can be removed. In addition to being unnecessary, the infinite loop is dangerous since some other unknown condition may appear causing the loop to never break. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: reject normal unlock when lock is waiting for lookupDavid Teigland
Non-forced unlocks should be rejected if the lock is waiting on the rsb_lookup list for another lock to establish the master node. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: validate messages before processingDavid Teigland
There was some hit and miss validation of messages that has now been cleaned up and unified. Before processing a message, the new validate_message() function checks that the lkb is the appropriate type, process-copy or master-copy, and that the message is from the correct nodeid for the the given lkb. Other checks and assertions on the lkb type and nodeid have been removed. The assertions were particularly bad since they would panic the machine instead of just ignoring the bad message. Although other recent patches have made processing old message unlikely, it still may be possible for an old message to be processed and caught by these checks. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: reject messages from non-membersDavid Teigland
Messages from nodes that are no longer members of the lockspace should be ignored. When nodes are removed from the lockspace, recovery can sometimes complete quickly enough that messages arrive from a removed node after recovery has completed. When processed, these messages would often cause an error message, and could in some cases change some state, causing problems. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: another call to confirm_master in receive_request_replyDavid Teigland
When a failed request (EBADR or ENOTBLK) is unlocked/canceled instead of retried, there may be other lkb's waiting on the rsb_lookup list for it to complete. A call to confirm_master() is needed to move on to the next waiting lkb since the current one won't be retried. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: recover locks waiting for overlap repliesDavid Teigland
When recovery looks at locks waiting for replies, it fails to consider locks that have already received a reply for their first remote operation, but not received a reply for secondary, overlapping unlock/cancel. The appropriate stub reply needs to be called for these waiters. Appears when we start doing recovery in the presence of a many overlapping unlock/cancel ops. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: clear ast_type when removing from astqueueDavid Teigland
The lkb_ast_type field indicates whether the lkb is on the astqueue list. When clearing locks for a process, lkb's were being removed from the astqueue list without clearing the field. If release_lockspace then happened immediately afterward, it could try to remove the lkb from the list a second time. Appears when process calls libdlm dlm_release_lockspace() which first closes the ls dev triggering clear_proc_locks, and then removes the ls (a write to control dev) causing release_lockspace(). Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: use fixed errno values in messagesDavid Teigland
Some errno values differ across platforms. So if we return things like -EINPROGRESS from one node it can get misinterpreted or rejected on another one. This patch fixes up the errno values passed on the wire so that they match the x86 ones (so as not to break the protocol), and re-instates the platform-specific ones at the other end. Many thanks to Fabio for testing this patch. Initial patch from Patrick. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: swap bytes for rcom lock replyFabio M. Di Nitto
DLM_RCOM_LOCK_REPLY messages need byte swapping. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: align midcomms message bufferFabio M. Di Nitto
gcc does not guarantee that an auto buffer is 64bit aligned. This change allows sparc64 to work. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: close otherconsPatrick Caulfeld
This patch addresses a problem introduced with the last round of lowcomms patches where the 'othercon' connections do not get freed when the DLM shuts down. This results in the error message "slab error in kmem_cache_destroy(): cache `dlm_conn': Can't free all objects" and the DLM cannot be restarted without a system reboot. See bz#428119 Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: use dlm prefix on alloc and free functionsDavid Teigland
The dlm functions in memory.c should use the dlm_ prefix. Also, use kzalloc/kfree directly for dlm_direntry's, removing the wrapper functions. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: don't print common non-errorsDavid Teigland
Change log_error() to log_debug() for conditions that can occur in large number in normal operation. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: proper prototypesAdrian Bunk
This patch adds a proper prototype for some functions in fs/dlm/dlm_internal.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: bind connections from known local address when using TCPLon Hohberger
A common problem occurs when multiple IP addresses within the same subnet are assigned to the same NIC. If we make a connection attempt to another address on the same subnet as one of those addresses, the connection attempt will not necessarily be routed from the address we want. In the case of the DLM, the other nodes will quickly drop the connection attempt, causing problems. This patch makes the DLM bind to the local address it acquired from the cluster manager when using TCP prior to making a connection, obviating the need for administrators to "fix" their systems or use clever routing tricks. Signed-off-by: Lon Hohberger <lhh@redhat.com> Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25: (1470 commits) [IPV6] ADDRLABEL: Fix double free on label deletion. [PPP]: Sparse warning fixes. [IPV4] fib_trie: remove unneeded NULL check [IPV4] fib_trie: More whitespace cleanup. [NET_SCHED]: Use nla_policy for attribute validation in ematches [NET_SCHED]: Use nla_policy for attribute validation in actions [NET_SCHED]: Use nla_policy for attribute validation in classifiers [NET_SCHED]: Use nla_policy for attribute validation in packet schedulers [NET_SCHED]: sch_api: introduce constant for rate table size [NET_SCHED]: Use typeful attribute parsing helpers [NET_SCHED]: Use typeful attribute construction helpers [NET_SCHED]: Use NLA_PUT_STRING for string dumping [NET_SCHED]: Use nla_nest_start/nla_nest_end [NET_SCHED]: Propagate nla_parse return value [NET_SCHED]: act_api: use PTR_ERR in tcf_action_init/tcf_action_get [NET_SCHED]: act_api: use nlmsg_parse [NET_SCHED]: act_api: fix netlink API conversion bug [NET_SCHED]: sch_netem: use nla_parse_nested_compat [NET_SCHED]: sch_atm: fix format string warning [NETNS]: Add namespace for ICMP replying code. ...
2008-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (79 commits) Remove references to "make dep" kconfig: document use of HAVE_* Introduce new section reference annotations tags: __ref, __refdata, __refconst kbuild: warn about ld added unique sections kbuild: add verbose option to Section mismatch reporting in modpost kconfig: tristate choices with mixed tristate and boolean values asm-generic/vmlix.lds.h: simplify __mem{init,exit}* dependencies remove __attribute_used__ kbuild: support ARCH=x86 in buildtar kconfig: remove "enable" kbuild: simplified warning report in modpost kbuild: introduce a few helpers in modpost kbuild: use simpler section mismatch warnings in modpost kbuild: link vmlinux.o before kallsyms passes kbuild: introduce new option to enhance section mismatch analysis Use separate sections for __dev/__cpu/__mem code/data compiler.h: introduce __section() all archs: consolidate init and exit sections in vmlinux.lds.h kbuild: check section names consistently in modpost kbuild: introduce blacklisting in modpost ...
2008-01-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits) jbd2: sparse pointer use of zero as null jbd2: Use round-jiffies() function for the "5 second" ext4/jbd2 wakeup jbd2: Mark jbd2 slabs as SLAB_TEMPORARY jbd2: add lockdep support ext4: Use the ext4_ext_actual_len() helper function ext4: fix uniniatilized extent splitting error ext4: Check for return value from sb_set_blocksize ext4: Add stripe= option to /proc/mounts ext4: Enable the multiblock allocator by default ext4: Add multi block allocator for ext4 ext4: Add new functions for searching extent tree ext4: Add ext4_find_next_bit() ext4: fix up EXT4FS_DEBUG builds ext4: Fix ext4_show_options to show the correct mount options. ext4: Add EXT4_IOC_MIGRATE ioctl ext4: Add inode version support in ext4 vfs: Add 64 bit i_version support ext4: Add the journal checksum feature jbd2: jbd2 stats through procfs ext4: Take read lock during overwrite case. ...
2008-01-28jbd2: sparse pointer use of zero as nullMingming Cao
Get rid of sparse related warnings from places that use integer as NULL pointer. (Ported from upstream ext3/jbd changes.) Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28jbd2: Use round-jiffies() function for the "5 second" ext4/jbd2 wakeupMingming Cao
While "every 5 seconds" doesn't sound as a problem, there can be many of these (and these timers do add up over all the kernel). The "5 second" wakeup isn't really timing sensitive; in addition even with rounding it'll still happen every 5 seconds (with the exception of the very first time, which is likely to be rounded up to somewhere closer to 6 seconds) (Ported from similar JBD patch made by Arjan van de Ven to fs/jbd/transaction.c) Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28jbd2: Mark jbd2 slabs as SLAB_TEMPORARYMingming Cao
This patch marks slab allocations by jbd2 as short-lived in support of Mel Gorman's "Group short-lived and reclaimable kernel allocations" patch. (Ported from similar changes made to fs/jbd/journal.c and fs/jbd/revoke.c in Mel's patch.) Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28jbd2: add lockdep supportMingming Cao
Ported from similar patch for the jbd layer. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Use the ext4_ext_actual_len() helper functionAneesh Kumar K.V
ext4 uses the high bit of the extent length to encode whether the extent is intialized or not. The helper function ext4_ext_get_actual_len should be used to get the actual length of the extent. This addresses the kernel bug documented here: http://bugzilla.kernel.org/show_bug.cgi?id=9732 kernel BUG at fs/ext4/extents.c:1056! .... Call Trace: [<ffffffff88366073>] :ext4dev:ext4_ext_get_blocks+0x5ba/0x8c1 [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff812748f6>] _spin_unlock+0x17/0x20 [<ffffffff883400a6>] :jbd2:start_this_handle+0x4e0/0x4fe [<ffffffff88366564>] :ext4dev:ext4_fallocate+0x175/0x39a [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff81056480>] __lock_acquire+0x4e7/0xc4d [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff810a8de7>] sys_fallocate+0xe4/0x10d [<ffffffff8100c043>] tracesys+0xd5/0xda Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: fix uniniatilized extent splitting errorDmitry Monakhov
Fix bug reported by Dmitry Monakhov caused by lost error code Testcase: blksize = 0x1000; fd = open(argv[1], O_RDWR|O_CREAT, 0700); unsigned long long sz = 0x10000000UL; /* allocating big blocks chunk */ syscall(__NR_fallocate, fd, 0, 0UL, sz) /* grab all other available filesystem space */ tfd = open("tmp", O_RDWR|O_CREAT|O_DIRECT, 0700); while( write(tfd, buf, 4096) > 0); /* loop untill ENOSPC */ fsync(fd); /* just in case */ while (pos < sz) { /* each seek+ write operation result in splits uninitialized extent in three extents. Splitting may result in new extent allocation which probably will fail because of ENOSPC*/ lseek(fd, blksize*2 -1, SEEK_CUR); if ((ret = write(fd, 'a', 1)) != 1) exit(1); pos += blksize * 2; } Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Check for return value from sb_set_blocksizeAneesh Kumar K.V
sb_set_blocksize validates whether the specfied block size can be used by the file system. Make sure we fail mounting the file system if the blocksize specfied cannot be used. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Add stripe= option to /proc/mountsMiklos Szeredi
Add stripe= option to /proc/mounts for ext4 filesystems. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Enable the multiblock allocator by defaultAneesh Kumar K.V
Enable the multiblock allocator by default. Fix ext4_show_options() so if it is not enabled, the nomballoc option included in /proc/mounts. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-29ext4: Add multi block allocator for ext4Alex Tomas
Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Add new functions for searching extent treeAlex Tomas
Add the functions ext4_ext_search_left() and ext4_ext_search_right(), which are used by mballoc during ext4_ext_get_blocks to decided whether to merge extent information. Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Johann Lombardi <johann@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: fix up EXT4FS_DEBUG buildsEric Sandeen
Builds with EXT4FS_DEBUG defined (to enable ext4_debug()) fail without these changes. Clean up some format warnings too. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Fix ext4_show_options to show the correct mount options.Aneesh Kumar K.V
We need to look at the default value and make sure the mount options are not set via default value before showing them via ext4_show_options Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Add EXT4_IOC_MIGRATE ioctlAneesh Kumar K.V
The below patch add ioctl for migrating ext3 indirect block mapped inode to ext4 extent mapped inode. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Add inode version support in ext4Jean Noel Cordenner
This patch adds 64-bit inode version support to ext4. The lower 32 bits are stored in the osd1.linux1.l_i_version field while the high 32 bits are stored in the i_version_hi field newly created in the ext4_inode. This field is incremented in case the ext4_inode is large enough. A i_version mount option has been added to enable the feature. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jean Noel Cordenner <jean-noel.cordenner@bull.net>
2008-01-28vfs: Add 64 bit i_version supportJean Noel Cordenner
The i_version field of the inode is changed to be a 64-bit counter that is set on every inode creation and that is incremented every time the inode data is modified (similarly to the "ctime" time-stamp). The aim is to fulfill a NFSv4 requirement for rfc3530. This first part concerns the vfs, it converts the 32-bit i_version in the generic inode to a 64-bit, a flag is added in the super block in order to check if the feature is enabled and the i_version is incremented in the vfs. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Jean Noel Cordenner <jean-noel.cordenner@bull.net> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com>
2008-01-28ext4: Add the journal checksum featureGirish Shilamkar
The journal checksum feature adds two new flags i.e JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM. JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the checksum for the blocks described by the descriptor blocks. Due to checksums, writing of the commit record no longer needs to be synchronous. Now commit record can be sent to disk without waiting for descriptor blocks to be written to disk. This behavior is controlled using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be able to recover the journal with _ASYNC_COMMIT hence it is made incompat. The commit header has been extended to hold the checksum along with the type of the checksum. For recovery in pass scan checksums are verified to ensure the sanity and completeness(in case of _ASYNC_COMMIT) of every transaction. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Girish Shilamkar <girish@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28jbd2: jbd2 stats through procfsJohann Lombardi
The patch below updates the jbd stats patch to 2.6.20/jbd2. The initial patch was posted by Alex Tomas in December 2005 (http://marc.info/?l=linux-ext4&m=113538565128617&w=2). It provides statistics via procfs such as transaction lifetime and size. Sometimes, investigating performance problems, i find useful to have stats from jbd about transaction's lifetime, size, etc. here is a patch for review and inclusion probably. for example, stats after creation of 3M files in htree directory: [root@bob ~]# cat /proc/fs/jbd/sda/history R/C tid wait run lock flush log hndls block inlog ctime write drop close R 261 8260 2720 0 0 750 9892 8170 8187 C 259 750 0 4885 1 R 262 20 2200 10 0 770 9836 8170 8187 R 263 30 2200 10 0 3070 9812 8170 8187 R 264 0 5000 10 0 1340 0 0 0 C 261 8240 3212 4957 0 R 265 8260 1470 0 0 4640 9854 8170 8187 R 266 0 5000 10 0 1460 0 0 0 C 262 8210 2989 4868 0 R 267 8230 1490 10 0 4440 9875 8171 8188 R 268 0 5000 10 0 1260 0 0 0 C 263 7710 2937 4908 0 R 269 7730 1470 10 0 3330 9841 8170 8187 R 270 0 5000 10 0 830 0 0 0 C 265 8140 3234 4898 0 C 267 720 0 4849 1 R 271 8630 2740 20 0 740 9819 8170 8187 C 269 800 0 4214 1 R 272 40 2170 10 0 830 9716 8170 8187 R 273 40 2280 0 0 3530 9799 8170 8187 R 274 0 5000 10 0 990 0 0 0 where, R - line for transaction's life from T_RUNNING to T_FINISHED C - line for transaction's checkpointing tid - transaction's id wait - for how long we were waiting for new transaction to start (the longest period journal_start() took in this transaction) run - real transaction's lifetime (from T_RUNNING to T_LOCKED lock - how long we were waiting for all handles to close (time the transaction was in T_LOCKED) flush - how long it took to flush all data (data=ordered) log - how long it took to write the transaction to the log hndls - how many handles got to the transaction block - how many blocks got to the transaction inlog - how many blocks are written to the log (block + descriptors) ctime - how long it took to checkpoint the transaction write - how many blocks have been written during checkpointing drop - how many blocks have been dropped during checkpointing close - how many running transactions have been closed to checkpoint this one all times are in msec. [root@bob ~]# cat /proc/fs/jbd/sda/info 280 transaction, each upto 8192 blocks average: 1633ms waiting for transaction 3616ms running transaction 5ms transaction was being locked 1ms flushing data (in ordered mode) 1799ms logging transaction 11781 handles per transaction 5629 blocks per transaction 5641 logged blocks per transaction Signed-off-by: Johann Lombardi <johann.lombardi@bull.net> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28ext4: Take read lock during overwrite case.Aneesh Kumar K.V
When we are overwriting a file and not actually allocating new file system blocks we need to take only the read lock on i_data_sem. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Convert truncate_mutex to read write semaphore.Aneesh Kumar K.V
We are currently taking the truncate_mutex for every read. This would have performance impact on large CPU configuration. Convert the lock to read write semaphore and take read lock when we are trying to read the file. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Make ext4_get_blocks_wrap take the truncate_mutex early.Aneesh Kumar K.V
When doing a migrate from ext3 to ext4 inode we need to make sure the test for inode type and walking inode data happens inside lock. To make this happen move truncate_mutex early before checking the i_flags. This actually should enable us to remove the verify_chain(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: remove unused code from ext4_find_entry()Mariusz Kozlowski
The unused code found in ext3_find_entry() is also present (and still unused) in the ext4_find_entry() code. This patch removes it. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Check for the correct error return fromAneesh Kumar K.V
ext4_ext_get_blocks returns negative values on error. We should check for <= 0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28jbd2: Fix assertion failure in fs/jbd2/checkpoint.cJan Kara
Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-01-28ext4: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28Add buffer head related helper functionsAneesh Kumar K.V
Add buffer head related helper function bh_uptodate_or_lock and bh_submit_read which can be used by file system Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>