aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-08-27arm64: mm: Enable RCU fast_gupfast_gup/3.17-rc1Steve Capper
Activate the RCU fast_gup for ARM64. We also need to force THP splits to broadcast an IPI s.t. we block in the fast_gup page walker. As THP splits are comparatively rare, this should not lead to a noticeable performance degradation. Some pre-requisite functions pud_write and pud_page are also added. Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-08-27arm64: mm: Enable HAVE_RCU_TABLE_FREE logicSteve Capper
In order to implement fast_get_user_pages we need to ensure that the page table walker is protected from page table pages being freed from under it. This patch enables HAVE_RCU_TABLE_FREE, any page table pages belonging to address spaces with multiple users will be call_rcu_sched freed. Meaning that disabling interrupts will block the free and protect the fast gup page walker. Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2014-08-27arm: mm: Enable RCU fast_gupSteve Capper
Activate the RCU fast_gup for ARM. We also need to force THP splits to broadcast an IPI s.t. we block in the fast_gup page walker. As THP splits are comparatively rare, this should not lead to a noticeable performance degradation. Some pre-requisite functions pud_write and pud_page are also added. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-08-27arm: mm: Enable HAVE_RCU_TABLE_FREE logicSteve Capper
In order to implement fast_get_user_pages we need to ensure that the page table walker is protected from page table pages being freed from under it. This patch enables HAVE_RCU_TABLE_FREE, any page table pages belonging to address spaces with multiple users will be call_rcu_sched freed. Meaning that disabling interrupts will block the free and protect the fast gup page walker. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-08-27arm: mm: Introduce special ptes for LPAESteve Capper
We need a mechanism to tag ptes as being special, this indicates that no attempt should be made to access the underlying struct page * associated with the pte. This is used by the fast_gup when operating on ptes as it has no means to access VMAs (that also contain this information) locklessly. The L_PTE_SPECIAL bit is already allocated for LPAE, this patch modifies pte_special and pte_mkspecial to make use of it, and defines __HAVE_ARCH_PTE_SPECIAL. This patch also excludes special ptes from the icache/dcache sync logic. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2014-08-16Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
2014-08-15intel_idle: Disable Baytrail Core and Module C6 auto-demotionLen Brown
Power efficiency improves on Baytrail (Intel Atom Processor E3000) when Linux disables C6 auto-demotion. Based on work by Srinidhi Kasagar <srinidhi.kasagar@intel.com>. Signed-off-by: Len Brown <len.brown@intel.com> Cc: x86@kernel.org
2014-08-14Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull Sparc fixes from David Miller: "Hook up the memfd syscall, and properly claim all PCI resources discovered when building the PCI device tree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up memfd_create system call. sparc64: Properly claim resources as each PCI bus is probed. sparc64: Skip bogus PCI bridge ranges. sparc64: Expand PCI bridge probing debug logging.
2014-08-14Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - make clean also considers $(extra-m) and $(extra-) to be consistent - cleanup and fixes in scripts/Makefile.host - allow to override the name of the Python 2 executable with make PYTHON=... (only needed for ia64 in practice) - option to split debugingo into *.dwo files to save disk space if the compiler supports it (CONFIG_DEBUG_INFO_SPLIT) - option to use dwarf4 debuginfo if the compiler supports it (CONFIG_DEBUG_INFO_DWARF4) - fix for disabling certain warnings with clang - fix for unneeded rebuild with dash when a command contains backslashes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix handling of backslashes in *.cmd files kbuild, LLVMLinux: Supress warnings unless W=1-3 Kbuild: Add a option to enable dwarf4 v2 kbuild: Support split debug info v4 kbuild: allow to override Python command name kbuild: clean-up and bug fix of scripts/Makefile.host kbuild: clean up scripts/Makefile.host kbuild: drop shared library support from Makefile.host kbuild: fix a bug of C++ host program handling kbuild: fix a typo in scripts/Makefile.host scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
2014-08-14Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are some more powerpc bits for 3.17, essentially fixes. The biggest series, also aimed at -stable, is from Aneesh and is the result of weeks and weeks of debugging to find out why the heck or THP implementation was occasionally triggering multi-hit errors in our level 1 TLB. It ended up being a combination of issues including subtleties as to how we should invalidate those special 'MPSS' pages we use to allow the use of 16M pages inside 4K/64K "base page size" segments (you really have to love our MMU !) Another interesting one in the "OMG" category is the series from Michael adding memory barriers to spin_is_locked(). That's also the result of many days of debugging to figure out why the semaphore code would occasionally crash in ways that made no sense. It ended up being some creative lock stacking that was defeated by the fact that our locks allow a load inside the locked section to be re-ordered with the load of the lock value itself (I'm still of two mind about whether to kill that once and for all by putting a heavier barrier back into our lock implementation...). The fixes come with a long explanation in the cset comments, feel free to read it if you feel like having a headache today" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc/thp: Add tracepoints to track hugepage invalidate powerpc/mm: Use read barrier when creating real_pte powerpc/thp: Use ACCESS_ONCE when loading pmdp powerpc/thp: Invalidate with vpn in loop powerpc/thp: Handle combo pages in invalidate powerpc/thp: Invalidate old 64K based hash page mapping before insert of 4k pte powerpc/thp: Don't recompute vsid and ssize in loop on invalidate powerpc/thp: Add write barrier after updating the valid bit powerpc: reorder per-cpu NUMA information's initialization powerpc/perf/hv-24x7: Use kmem_cache_free powerpc/pseries/hvcserver: Fix endian issue in hvcs_get_partner_info powerpc: Hard disable interrupts in xmon powerpc: remove duplicate definition of TEXASR_FS powerpc/pseries: Avoid deadlock on removing ddw powerpc/pseries: Failure on removing device node powerpc/boot: Use correct zlib types for comparison powerpc/powernv: Interface to register/unregister opal dump region printk: Add function to return log buffer address and size powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYS powerpc/ppc476: Disable BTAC ...
2014-08-14Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ...
2014-08-14Merge tag 'stable/for-linus-3.17-b-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from David Vrabel: - fix ARM build - fix boot crash with PVH guests - improve reliability of resume/migration * tag 'stable/for-linus-3.17-b-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: use vmap() to map grant table pages in PVH guests x86/xen: resume timer irqs early arm/xen: remove duplicate arch_gnttab_init() function
2014-08-13sparc: Hook up memfd_create system call.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13sparc64: Properly claim resources as each PCI bus is probed.David S. Miller
Perform a pci_claim_resource() on all valid resources discovered during the OF device tree scan. Based almost entirely upon the PCI OF bus probing code which does the same thing there. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13sparc64: Skip bogus PCI bridge ranges.David S. Miller
It seems that when a PCI Express bridge is not in use and has no devices behind it, the ranges property is bogus. Specifically the size property is of the form [0xffffffff:...], and if you add this size to the resource start address the 64-bit calculation will overflow. Just check specifically for this size value signature and skip them. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13sparc64: Expand PCI bridge probing debug logging.David S. Miller
Dump the various aspects of the PCI bridge probed at boot time, most importantly the bridge number ranges, and the ranges property. This helps diagnose PCI resource issues and other problems by giving ofpci_debug=1 on the boot command line. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several networking final fixes and tidies for the merge window: 1) Changes during the merge window unintentionally took away the ability to build bluetooth modular, fix from Geert Uytterhoeven. 2) Several phy_node reference count bug fixes from Uwe Kleine-König. 3) Fix ucc_geth build failures, also from Uwe Kleine-König. 4) Fix klog false positivies when netlink messages go to network taps, by properly resetting the network header. Fix from Daniel Borkmann. 5) Sizing estimate of VF netlink messages is too small, from Jiri Benc. 6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian. 7) VLAN untagging is erroneously dependent upon whether the VLAN module is loaded or not, but there are generic dependencies that matter wrt what can be expected as the SKB enters the stack. Make the basic untagging generic code, and do it unconditionally. From Vlad Yasevich. 8) xen-netfront only has so many slots in it's transmit queue so linearize packets that have too many frags. From Zoltan Kiss. 9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits) net: bcmgenet: correctly resume adapter from Wake-on-LAN net: bcmgenet: update UMAC_CMD only when link is detected net: bcmgenet: correctly suspend and resume PHY device net: bcmgenet: request and enable main clock earlier net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call xen-netfront: Fix handling packets on compound pages with skb_linearize net: fec: Support phys probed from devicetree and fixed-link smsc: replace WARN_ON() with WARN_ON_SMP() xen-netback: Don't deschedule NAPI when carrier off net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile wan: wanxl: Remove typedefs from struct names m68k/atari: EtherNEC - ethernet support (ne) net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call hdlc: Remove typedefs from struct names airo_cs: Remove typedef local_info_t atmel: Remove typedef atmel_priv_ioctl com20020_cs: Remove typedef com20020_dev_t ethernet: amd: Remove typedef local_info_t net: Always untag vlan-tagged traffic on input. drivers: net: Add APM X-Gene SoC ethernet driver support. ...
2014-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull Sparc fixes from David Miller: "Sparc bug fixes, one of which was preventing successful SMP boots with mainline" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix pcr_ops initialization and usage bugs. sparc64: Do not disable interrupts in nmi_cpu_busy() sparc: Hook up seccomp and getrandom system calls. sparc: fix decimal printf format specifiers prefixed with 0x
2014-08-13Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/apic updates from Thomas Gleixner: "This is a major overhaul to the x86 apic subsystem consisting of the following parts: - Remove obsolete APIC driver abstractions (David Rientjes) - Use the irqdomain facilities to dynamically allocate IRQs for IOAPICs. This is a prerequisite to enable IOAPIC hotplug support, and it also frees up wasted vectors (Jiang Liu) - Misc fixlets. Despite the hickup in Ingos previous pull request - caused by the missing fixup for the suspend/resume issue reported by Borislav - I strongly recommend that this update finds its way into 3.17. Some history for you: This is preparatory work for physical IOAPIC hotplug. The first attempt to support this was done by Yinghai and I shot it down because it just added another layer of obscurity and complexity to the already existing mess without tackling the underlying shortcomings of the current implementation. After quite some on- and offlist discussions, I requested that the design of this functionality must use generic infrastructure, i.e. irq domains, which provide all the mechanisms to dynamically map linux interrupt numbers to physical interrupts. Jiang picked up the idea and did a great job of consolidating the existing interfaces to manage the x86 (IOAPIC) interrupt system by utilizing irq domains. The testing in tip, Linux-next and inside of Intel on various machines did not unearth any oddities until Borislav exposed it to one of his oddball machines. The issue was resolved quickly, but unfortunately the fix fell through the cracks and did not hit the tip tree before Ingo sent the pull request. Not entirely Ingos fault, I also assumed that the fix was already merged when Ingo asked me whether he could send it. Nevertheless this work has a proper design, has undergone several rounds of review and the final fallout after applying it to tip and integrating it into Linux-next has been more than moderate. It's the ground work not only for IOAPIC hotplug, it will also allow us to move the lowlevel vector allocation into the irqdomain hierarchy, which will benefit other architectures as well. Patches are posted already, but they are on hold for two weeks, see below. I really appreciate the competence and responsiveness Jiang has shown in course of this endavour. So I'm sure that any fallout of this will be addressed in a timely manner. FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA will have a look at the hopefully zero fallout until I'm back" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation x86/apic/vsmp: Make is_vsmp_box() static x86, apic: Remove enable_apic_mode callback x86, apic: Remove setup_portio_remap callback x86, apic: Remove multi_timer_check callback x86, apic: Replace noop_check_apicid_used x86, apic: Remove check_apicid_present callback x86, apic: Remove mps_oem_check callback x86, apic: Remove smp_callin_clear_local_apic callback x86, apic: Replace trampoline physical addresses with defaults x86, apic: Remove x86_32_numa_cpu_node callback x86: intel-mid: Use the new io_apic interfaces x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box() x86, irq: Clean up irqdomain transition code x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled x86, irq, SFI: Release IOAPIC pin when PCI device is disabled x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled x86, irq: Introduce helper functions to release IOAPIC pin x86, irq: Simplify the way to handle ISA IRQ ...
2014-08-13Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/efix fixes from Peter Anvin: "Two EFI-related Kconfig changes, which happen to touch immediately adjacent lines in Kconfig and thus collapse to a single patch" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub x86/efi: Fix 3DNow optimization build failure in EFI stub
2014-08-13Merge branch 'x86-xsave-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/xsave changes from Peter Anvin: "This is a patchset to support the XSAVES instruction required to support context switch of supervisor-only features in upcoming silicon. This patchset missed the 3.16 merge window, which is why it is based on 3.15-rc7" * 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, xsave: Add forgotten inline annotation x86/xsaves: Clean up code in xstate offsets computation in xsave area x86/xsave: Make it clear that the XSAVE macros use (%edi)/(%rdi) Define kernel API to get address of each state in xsave area x86/xsaves: Enable xsaves/xrstors x86/xsaves: Call booting time xsaves and xrstors in setup_init_fpu_buf x86/xsaves: Save xstate to task's xsave area in __save_fpu during booting time x86/xsaves: Add xsaves and xrstors support for booting time x86/xsaves: Clear reserved bits in xsave header x86/xsaves: Use xsave/xrstor for saving and restoring user space context x86/xsaves: Use xsaves/xrstors for context switch x86/xsaves: Use xsaves/xrstors to save and restore xsave area x86/xsaves: Define a macro for handling xsave/xrstor instruction fault x86/xsaves: Define macros for xsave instructions x86/xsaves: Change compacted format xsave area header x86/alternative: Add alternative_input_2 to support alternative with two features and input x86/xsaves: Add a kernel parameter noxsaves to disable xsaves/xrstors
2014-08-13Merge tag 'metag-for-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull metag architecture updates from James Hogan: "Just a couple of minor static analysis fixes, removal of a NULL check that should never happen, and fix an error check where an unsigned value was being checked to see if it was negative" * tag 'metag-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: cachepart: Fix failure check metag: hugetlbpage: Remove null pointer checks that could never happen
2014-08-13powerpc/thp: Add tracepoints to track hugepage invalidateAneesh Kumar K.V
Add tracepoint to track hugepage invalidate. This help us in debugging difficult to track bugs. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/mm: Use read barrier when creating real_pteAneesh Kumar K.V
On ppc64 we support 4K hash pte with 64K page size. That requires us to track the hash pte slot information on a per 4k basis. We do that by storing the slot details in the second half of pte page. The pte bit _PAGE_COMBO is used to indicate whether the second half need to be looked while building real_pte. We need to use read memory barrier while doing that so that load of hidx is not reordered w.r.t _PAGE_COMBO check. On the store side we already do a lwsync in __hash_page_4K CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Use ACCESS_ONCE when loading pmdpAneesh Kumar K.V
We would get wrong results in compiler recomputed old_pmd. Avoid that by using ACCESS_ONCE CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Invalidate with vpn in loopAneesh Kumar K.V
As per ISA, for 4k base page size we compare 14..65 bits of VA specified with the entry_VA in tlb. That implies we need to make sure we do a tlbie with all the possible 4k va we used to access the 16MB hugepage. With 64k base page size we compare 14..57 bits of VA. Hence we cannot ignore the lower 24 bits of va while tlbie .We also cannot tlb invalidate a 16MB entry with just one tlbie instruction because we don't track which va was used to instantiate the tlb entry. CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Handle combo pages in invalidateAneesh Kumar K.V
If we changed base page size of the segment, either via sub_page_protect or via remap_4k_pfn, we do a demote_segment which doesn't flush the hash table entries. We do a lazy hash page table flush for all mapped pages in the demoted segment. This happens when we handle hash page fault for these pages. We use _PAGE_COMBO bit along with _PAGE_HASHPTE to indicate whether a pte is backed by 4K hash pte. If we find _PAGE_COMBO not set on the pte, that implies that we could possibly have older 64K hash pte entries in the hash page table and we need to invalidate those entries. Use _PAGE_COMBO to determine the page size with which we should invalidate the hash table entries on unmap. CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Invalidate old 64K based hash page mapping before insert of 4k pteAneesh Kumar K.V
If we changed base page size of the segment, either via sub_page_protect or via remap_4k_pfn, we do a demote_segment which doesn't flush the hash table entries. We do a lazy hash page table flush for all mapped pages in the demoted segment. This happens when we handle hash page fault for these pages. We use _PAGE_COMBO bit along with _PAGE_HASHPTE to indicate whether a pte is backed by 4K hash pte. If we find _PAGE_COMBO not set on the pte, that implies that we could possibly have older 64K hash pte entries in the hash page table and we need to invalidate those entries. Handle this correctly for 16M pages CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Don't recompute vsid and ssize in loop on invalidateAneesh Kumar K.V
The segment identifier and segment size will remain the same in the loop, So we can compute it outside. We also change the hugepage_invalidate interface so that we can use it the later patch CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Add write barrier after updating the valid bitAneesh Kumar K.V
With hugepages, we store the hpte valid information in the pte page whose address is stored in the second half of the PMD. Use a write barrier to make sure clearing pmd busy bit and updating hpte valid info are ordered properly. CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: reorder per-cpu NUMA information's initializationNishanth Aravamudan
There is an issue currently where NUMA information is used on powerpc (and possibly ia64) before it has been read from the device-tree, which leads to large slab consumption with CONFIG_SLUB and memoryless nodes. NUMA powerpc non-boot CPU's cpu_to_node/cpu_to_mem is only accurate after start_secondary(), similar to ia64, which is invoked via smp_init(). Commit 6ee0578b4daae ("workqueue: mark init_workqueues() as early_initcall()") made init_workqueues() be invoked via do_pre_smp_initcalls(), which is obviously before the secondary processors are online. Additionally, the following commits changed init_workqueues() to use cpu_to_node to determine the node to use for kthread_create_on_node: bce903809ab3f ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") f3f90ad469342 ("workqueue: determine NUMA node of workers accourding to the allowed cpumask") Therefore, when init_workqueues() runs, it sees all CPUs as being on Node 0. On LPARs or KVM guests where Node 0 is memoryless, this leads to a high number of slab deactivations (http://www.spinics.net/lists/linux-mm/msg67489.html). Fix this by initializing the powerpc-specific CPU<->node/local memory node mapping as early as possible, which on powerpc is do_init_bootmem(). Currently that function initializes the mapping for the boot CPU, but we extend it to setup the mapping for all possible CPUs. Then, in smp_prepare_cpus(), we can correspondingly set the per-cpu values for all possible CPUs. That ensures that before the early_initcalls run (and really as early as possible), the per-cpu NUMA mapping is accurate. While testing memoryless nodes on PowerKVM guests with a fix to the workqueue logic to use cpu_to_mem() instead of cpu_to_node(), with a guest topology of: available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 node 1 size: 16336 MB node 1 free: 15329 MB node distances: node 0 1 0: 10 40 1: 40 10 the slab consumption decreases from Slab: 932416 kB SUnreclaim: 902336 kB to Slab: 395264 kB SUnreclaim: 359424 kB And we a corresponding increase in the slab efficiency from slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 337 MB 11.28% 100.00% task_struct 288 MB 9.93% 100.00% to slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 37 MB 100.00% 100.00% task_struct 31 MB 100.00% 100.00% Powerpc didn't support memoryless nodes until recently (64bb80d87f01 "powerpc/numa: Enable CONFIG_HAVE_MEMORYLESS_NODES" and 8c272261194d "powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"). Those commits also helped improve memory consumption with these kind of environments. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/perf/hv-24x7: Use kmem_cache_freeHimangi Saraogi
Free memory allocated using kmem_cache_zalloc using kmem_cache_free rather than kfree. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/pseries/hvcserver: Fix endian issue in hvcs_get_partner_infoThomas Falcon
A buffer returned by H_VTERM_PARTNER_INFO contains device information in big endian format, causing problems for little endian architectures. This patch ensures that they are in cpu endian. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Hard disable interrupts in xmonAnton Blanchard
xmon only soft disables interrupts. This seems like a bad idea - we certainly don't want decrementer and PMU exceptions going off when we are debugging something inside xmon. This issue was uncovered when the hard lockup detector went off inside xmon. To ensure we wont get a spurious hard lockup warning, I also call touch_nmi_watchdog() when exiting xmon. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: remove duplicate definition of TEXASR_FSNishanth Aravamudan
It appears that commits 7f06f21d40a6 ("powerpc/tm: Add checking to treclaim/trechkpt") and e4e38121507a ("KVM: PPC: Book3S HV: Add transactional memory support") both added definitions of TEXASR_FS. Remove one of them. At the same time, fix the alignment of the remaining definition (should be tab-separated like the rest of the #defines). Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/pseries: Avoid deadlock on removing ddwGavin Shan
Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/pseries: Failure on removing device nodeGavin Shan
While running command "drmgr -c phb -r -s 'PHB 528'", following backtrace jumped out because the target device node isn't marked with OF_DETACHED by of_detach_node(), which caused by error returned from memory hotplug related reconfig notifier when disabling CONFIG_MEMORY_HOTREMOVE. The patch fixes it. ERROR: Bad of_node_put() on /pci@800000020000210/ethernet@0 CPU: 14 PID: 2252 Comm: drmgr Tainted: G W 3.16.0+ #427 Call Trace: [c000000012a776a0] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c000000012a77750] [c00000000083cd34] .dump_stack+0x7c/0x9c [c000000012a777d0] [c0000000006807c4] .of_node_release+0x58/0xe0 [c000000012a77860] [c00000000038a7d0] .kobject_release+0x174/0x1b8 [c000000012a77900] [c00000000038a884] .kobject_put+0x70/0x78 [c000000012a77980] [c000000000681680] .of_node_put+0x28/0x34 [c000000012a77a00] [c000000000681ea8] .__of_get_next_child+0x64/0x70 [c000000012a77a90] [c000000000682138] .of_find_node_by_path+0x1b8/0x20c [c000000012a77b40] [c000000000051840] .ofdt_write+0x308/0x688 [c000000012a77c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c000000012a77cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c000000012a77d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c000000012a77e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/boot: Use correct zlib types for comparisonBenjamin Herrenschmidt
Avoids this warning: arch/powerpc/boot/gunzip_util.c:118:9: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/powernv: Interface to register/unregister opal dump regionVasant Hegde
PowerNV platform is capable of capturing host memory region when system crashes (because of host/firmware). We have new OPAL API to register/ unregister memory region to be captured when system crashes. This patch adds support for new API. Also during boot time we register kernel log buffer and unregister before doing kexec. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYSMichael Ellerman
We have been a bit slack about updating the CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS masks. When we added POWER8, and also POWER8E we forgot to update the ALWAYS mask. And when we added POWER8_DD1 we forgot to update both the POSSIBLE and ALWAYS masks. Luckily this hasn't caused any actual bugs AFAICS. Failing to update the ALWAYS mask just forgoes a potential optimisation opportunity. Failing to update the POSSIBLE mask for POWER8_DD1 is also OK because it only removes a bit rather than adding any. Regardless they should all be in both masks so as to avoid any future bugs when the set of ALWAYS/POSSIBLE bits changes, or the masks themselves change. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Neuling <mikey@neuling.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/ppc476: Disable BTACAlistair Popple
This patch disables the branch target address CAM which under specific circumstances may cause the processor to skip execution of 1-4 instructions. This fixes IBM Erratum #47. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/powernv: Fix IOMMU group lostGavin Shan
When we take full hotplug to recover from EEH errors, PCI buses could be involved. For the case, the child devices of involved PCI buses can't be attached to IOMMU group properly, which is caused by commit 3f28c5a ("powerpc/powernv: Reduce multi-hit of iommu_add_device()"). When adding the PCI devices of the newly created PCI buses to the system, the IOMMU group is expected to be added in (C). (A) fails to bind the IOMMU group because bus->is_added is false. (B) fails because the device doesn't have binding IOMMU table yet. bus->is_added is set to true at end of (C) and pdev->is_added is set to true at (D). pcibios_add_pci_devices() pci_scan_bridge() pci_scan_child_bus() pci_scan_slot() pci_scan_single_device() pci_scan_device() pci_device_add() pcibios_add_device() A: Ignore device_add() B: Ignore pcibios_fixup_bus() pcibios_setup_bus_devices() pcibios_setup_device() C: Hit pcibios_finish_adding_to_bus() pci_bus_add_devices() pci_bus_add_device() D: Add device If the parent PCI bus isn't involved in hotplug, the IOMMU group is expected to be bound in (B). (A) should fail as the sysfs entries aren't populated. The patch fixes the issue by reverting commit 3f28c5a and remove WARN_ON() in iommu_add_device() to allow calling the function even the specified device already has associated IOMMU group. Cc: <stable@vger.kernel.org> # 3.16+ Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Add smp_mb()s to arch_spin_unlock_wait()Michael Ellerman
Similar to the previous commit which described why we need to add a barrier to arch_spin_is_locked(), we have a similar problem with spin_unlock_wait(). We need a barrier on entry to ensure any spinlock we have previously taken is visibly locked prior to the load of lock->slock. It's also not clear if spin_unlock_wait() is intended to have ACQUIRE semantics. For now be conservative and add a barrier on exit to give it ACQUIRE semantics. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Add smp_mb() to arch_spin_is_locked()Michael Ellerman
The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Fix "attempt to move .org backwards" errorGuenter Roeck
Once again, we see arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:866: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:890: Error: attempt to move .org backwards when compiling ppc:allmodconfig. This time the problem has been caused by to commit 0869b6fd209bda ("powerpc/book3s: Add basic infrastructure to handle HMI in Linux"), which adds functions hmi_exception_early and hmi_exception_after_realmode into a critical (size-limited) code area, even though that does not appear to be necessary. Move those functions to a non-critical area of the file. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/nohash: Split __early_init_mmu() into boot and secondaryScott Wood
__early_init_mmu() does some things that are really only needed by the boot cpu. On FSL booke, This includes calling memblock_enforce_memory_limit(), which is labelled __init. Secondary cpu init code can't be __init as that would break CPU hotplug. While it's probably a bug that memblock_enforce_memory_limit() isn't __init_memblock instead, there's no reason why we should be doing this stuff for secondary cpus in the first place. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-11sparc64: Fix pcr_ops initialization and usage bugs.David S. Miller
Christopher reports that perf_event_print_debug() can crash in uniprocessor builds. The crash is due to pcr_ops being NULL. This happens because pcr_arch_init() is only invoked by smp_cpus_done() which only executes in SMP builds. init_hw_perf_events() is closely intertwined with pcr_ops being setup properly, therefore: 1) Call pcr_arch_init() early on from init_hw_perf_events(), instead of from smp_cpus_done(). 2) Do not hook up a PMU type if pcr_ops is NULL after pcr_arch_init(). 3) Move init_hw_perf_events to a later initcall so that it we will be sure to invoke pcr_arch_init() after all cpus are brought up. Finally, guard the one naked sequence of pcr_ops dereferences in __global_pmu_self() with an appropriate NULL check. Reported-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11sparc64: Do not disable interrupts in nmi_cpu_busy()David S. Miller
nmi_cpu_busy() is a SMP function call that just makes sure that all of the cpus are spinning using cpu cycles while the NMI test runs. It does not need to disable IRQs because we just care about NMIs executing which will even with 'normal' IRQs disabled. It is not legal to enable hard IRQs in a SMP cross call, in fact this bug triggers the BUG check in irq_work_run_list(): BUG_ON(!irqs_disabled()); Because now irq_work_run() is invoked from the tail of generic_smp_call_function_single_interrupt(). Signed-off-by: David S. Miller <davem@davemloft.net>